PIV-TOOL(1)

NAME
piv-tool - smart card utility for HSPD-12 PIV cards

SYNOPSIS

piv-tool [OPTIONS]

The piv-tool utility can be used from the command line to perform miscellaneous smart card operations on a HSPD-12 PIV smart card as defined in NIST 800-73-3. It is intended for use with test cards only. It can be used to load objects, and generate key pairs, as well as send arbitrary APDU commands to a card after having authenticated to the card using the card key provided by the card vendor.

OPTIONS

--serial
    Print the card serial number derived from the CHUID object, if any. Output is in hex byte format.

--name, -n
    Print the name of the inserted card (driver)

--admin argument, -A argument
    Authenticate to the card using a 2DES, 3DES or AES key. The argument of the form.nf {A|M}:ref:alg .fi is required, were A uses "EXTERNAL AUTHENTICATION" and M uses "MUTUAL AUTHENTICATION".ref is normally 9B, and alg is 03 for 3DES,01 for 2DES, 08 for AES-128,0A for AES-192 or 0C for AES-256. The key is provided by the card vendor. The environment variablePIV_EXT_AUTH_KEY must point to either a binary file matching the length of the key or a text file containing the key in the format:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX

--genkey argument, -G argument
    Generate a key pair on the card and output the public key. The argument of the form.nf ref:alg .fi is required, where ref is 9A,9C, 9D or 9E andalg is 06,07, 11 or 14 for RSA 1024, RSA 2048, ECC 256 or ECC 384 respectively.

--object ContainerID, -O ContainerID
    Load an object onto the card. The ContainerID is as defined in NIST 800-73-n without leading 0x. Example: CHUID object is 3000

--cert ref, -C ref
    Load a certificate onto the card.ref is 9A,9C, 9D or9E

--compresscert ref, -Z ref
    Load a certificate that has been gzipped onto the card.ref is 9A,9C, 9D or 9E

--out file, -o file
    Output file for any operation that produces output.

--in file, -i file
    Input file for any operation that requires an input file.

--key-slots-discovery file
    Print properties of the key slots. Needs 'admin' authentication.

--send-apdu apdu, -s apdu
    Sends an arbitrary APDU to the card in the formatAA:BB:CC:DD:EE:FF.... This option may be repeated.

--reader arg, -r arg
    Number of the reader to use. By default, the first reader with a present card is used. Ifarg is an ATR, the reader with a matching card will be chosen.

--wait, -w
    Wait for a card to be inserted

--verbose, -v
    Causes piv-tool to be more verbose. Specify this flag several times to enable debug output in the opensc library.

SEE ALSO

opensc-tool(1)

AUTHORS

piv-tool was written by Douglas E. Engert <deengert@gmail.com>.