Kernel driver `i2c-sis5595.o'

Status: Beta

Supported adapters:
  * Silicon Integrated Systems Corp. SiS5595 Southbridge
    Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.

Author: Frodo Looijaard <frodol@dds.nl> and
        Mark D. Studebaker <mdsxyz123@yahoo.com>

   Note: all have mfr. ID 0x1039.
   SUPPORTED		PCI ID		
	5595		0008

   Note: The chips below contain a 0008 device which is incompatible with the
         5595. We recognize these by the presence of the listed
         "blacklist" PCI ID and refuse to load.

   NOT SUPPORTED	PCI ID		BLACKLIST PCI ID	
	 540		0008		0540
	 550		0008		0550
	5513		0008		5511
	5581		0008		5597
	5582		0008		5597
	5597		0008		5597
	5598		0008		5597/5598
	 630		0008		0630
	 645		0008		0645
	 730		0008		0730
	 735		0008		0735

Module Parameters
-----------------

force_addr=0xaddr	Set the I/O base address. Useful for boards
			that don't set the address in the BIOS. Does not do a
			PCI force; the device must still be present in lspci.
			Don't use this unless the driver complains that the
			base address is not set.
			Example: 'modprobe i2c-sis5595 force_addr=0x290'


Description
-----------

i2c-sis5595 is a true SMBus host driver for motherboards with the
SiS5595 southbridges.

WARNING: If you are trying to access the integrated sensors on the 
SiS5595 chip, you want the sis5595.o driver for those, not this driver.
This driver is a BUS driver, not a CHIP driver.
A BUS driver is used by other CHIP drivers to access chips on the bus.

To install this driver, simply do
  # modprobe i2c-sis5595
