[ << Backend ][Top][Contents][Index][ Scheme functions >> ]
[ < MultiMeasureRestNumber ][ Up : All layout objects ][]

3.1.90 MultiMeasureRestScript

An articulation (like a fermata) attached to a MultiMeasureRest grob. See also Script.

MultiMeasureRestScript objects are created by: Multi_measure_rest_engraver.

Standard settings:

direction (direction):

1

If side-axis is 0 (or X), then this property determines whether the object is placed LEFT, CENTER or RIGHT with respect to the other object. Otherwise, it determines whether the object is placed UP, CENTER or DOWN. Numerical values may also be used: UP=1, DOWN=-1, LEFT=-1, RIGHT=1, CENTER=0.

outside-staff-padding (number):

0

The padding to place between grobs when spacing according to outside-staff-priority. Two grobs with different outside-staff-padding values have the larger value of padding between them.

outside-staff-priority (number):

40

If set, the grob is positioned outside the staff in such a way as to avoid all collisions. In case of a potential collision, the grob with the smaller outside-staff-priority is closer to the staff.

parent-alignment-X (number):

0

Specify on which point of the parent the object is aligned. The value -1 means aligned on parent’s left edge, 0 on center, and 1 right edge, in X direction. Other numerical values may also be specified - the unit is half the parent’s width. If unset, the value from self-alignment-X property will be used.

self-alignment-X (number):

0

Specify alignment of an object. The value -1 means left aligned, 0 centered, and 1 right-aligned in X direction. Other numerical values may also be specified - the unit is half the object width.

side-axis (number):

1

If the value is X (or equivalently 0), the object is placed horizontally next to the other object. If the value is Y or 1, it is placed vertically.

staff-padding (dimension, in staff space):

0.25

Maintain this much space between reference points and the staff. Its effect is to align objects of differing sizes (like the dynamics p and f) on their baselines.

stencil (stencil):

ly:script-interface::print

The symbol to print.

vertical-skylines (pair of skylines):

#<unpure-pure-container #<program 72cb18096410 5e7e8a4e1960> #<program 72cb18096640 5e7e8a4e18a0> >

Two skylines, one above and one below this grob.

X-offset (number):

ly:self-alignment-interface::aligned-on-x-parent

The horizontal amount that this object is moved relative to its X-parent.

Y-extent (pair of numbers):

#<unpure-pure-container #<program 72cb18173bc0 5e7e8a4f2370> >

Extent (size) in the Y direction, measured in staff-space units, relative to object’s reference point.

Y-offset (number):

#<unpure-pure-container #<program 72cb1810e650 5e7e8a4e28a0> #<program 72cb1810e5e0 5e7e8a4e28d8> >

The vertical amount that this object is moved relative to its Y-parent.

This object supports the following interface(s): font-interface, grob-interface, multi-measure-interface, outside-staff-interface, script-interface, self-alignment-interface, side-position-interface and spanner-interface.

This object is of class Spanner (characterized by spanner-interface).

[ << Backend ][Top][Contents][Index][ Scheme functions >> ]
[ < MultiMeasureRestNumber ][ Up : All layout objects ][]

<< Back to Documentation Index

LilyPond – Internals Reference v2.24.4 (stable-branch).