<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="it_IT">
<context>
    <name>AboutDialog</name>
    <message>
        <location filename="../aboutdialog.cpp" line="44"/>
        <source>About KLog</source>
        <translation>About KLog</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="91"/>
        <source>You can also help us by sending bug reports or small code contributions, ideas or whatever you think may improve KLog.</source>
        <translation>Puoi essere di aiuto inviando bug report, contribuendo alla programmazione del software, o con idee o suggerimenti, o ogni altra cosa pensi possa essere utile per migliorare KLog.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="92"/>
        <location filename="../aboutdialog.cpp" line="171"/>
        <source>Authors</source>
        <translation>Autori</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="51"/>
        <source>By</source>
        <translation>Grazie a</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="62"/>
        <source>Author</source>
        <translation>Autore</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="53"/>
        <source>KLog is a free logbook for hamradio operators.</source>
        <translation>KLog è un logbook libero per operatori radio.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="58"/>
        <source>Please provide your review in KLog&apos;s eHam review page:</source>
        <translation>Per favore inserisci il tuo commento di utlizzo sulla maschera KLog dedicata ai commenti:</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="85"/>
        <location filename="../aboutdialog.cpp" line="86"/>
        <source>today</source>
        <translation>oggi</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="85"/>
        <source>Main developer</source>
        <translation>Sviluppatore Senior</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="91"/>
        <source>KLog is developed by a very small team and you are invited to join!</source>
        <translation>Klog è sviluppato da un esiguo numero di programmatori e tu sei invitato a partecipare!</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="129"/>
        <source>KLog developers have included a feature that reports some user data to the KLog server with the sole purpose of identifying the number of installed versions, to focus development in one direction or another taking into account users&apos; needs.</source>
        <translation>Gli sviluppatori KLog hanno incluso nel software uan funzionalità che invia alcuni dati utente ai server di KLog con l&apos;unico scopo di contare il numero di installazioni, in modo da concentrare gli sforzi verso le effettive necessità degli utilizzatori.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="130"/>
        <source>At present, the data that is provided is the following:</source>
        <translation>Attualmente, i dati inviati sono esclusivamente i seguenti:</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="111"/>
        <source>Translators bring KLog into your language. They are really an important part of the KLog development team.</source>
        <translation>I traduttori portano KLog nella tua lingua, pertanto sono parte integrante della squadra di sviluppo di KLog.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="61"/>
        <source>Find more information and the latest release at</source>
        <translation>Disponibili ulteriori informazioni sull&apos;ultima versione presso</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="54"/>
        <source>Please be aware that this is a development release and it may contain many bugs.&lt;br&gt;Backup your data before using this software!</source>
        <translation>Questa è una versione di sviluppo non definitiva e potrebbe contenere molti bug. &lt;br&gt;Fai backup frequenti durante l&apos;uso di questo software!</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="56"/>
        <source>Since 0.6.2, KLog has been fully rewritten to provide a cross-platform application that runs on all major operating systems (GNU/Linux, macOS and Windows) and to support new functionality.</source>
        <translation>A partire dalla versione 0.6.2, KLog è stato completamente riscritto per formire un&apos;applicazione disponibile su tutti i magigori sistemi operativi (Gnu/Linux, macOS e Windows) e per inserire nuove funzionalità.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="91"/>
        <source>If you want to provide support you are welcome to join the &lt;a href=&quot;https://groups.io/g/klog&quot;&gt;KLog mailing list&lt;/a&gt;!</source>
        <translation>Se vuoi aiutare puoi iscriverti  a &lt;a href=&quot;https://groups.io/g/klog&quot;&gt;mailing listi di KLog&lt;/a&gt;!</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="111"/>
        <source>If KLog is still not in your language and you want to help us, you are welcome to contact us through the &lt;a href=&quot;https://groups.io/g/klog&quot;&gt;KLog mailing list&lt;/a&gt;!</source>
        <translation>Se KLog non è disponibile nella tua lingua e vuoi essere di aiuto sarebbe il massimo tu ci scrivessi sulla &lt;a href=&quot;https://groups.io/g/klog&quot;&gt;mailing list di KLog&lt;/a&gt;!</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="112"/>
        <location filename="../aboutdialog.cpp" line="172"/>
        <source>Translators</source>
        <translation>Traduttori</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="128"/>
        <source>Privacy advisory</source>
        <translation>Nota sul trattamento dei dati personali</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="131"/>
        <source>Callsign</source>
        <translation>Nominativo</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="131"/>
        <source>KLog version</source>
        <translation>Versione KLog</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="131"/>
        <source>Operating system</source>
        <translation>Sistema operativo</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="132"/>
        <source>Be aware that you can enable/disable this feature from the Misc tab in the Setup page.</source>
        <translation>In ogni momento puoi sempre abilitare/disabilitare questa funzione nella linguetta Altro della maschera di configurazione.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="170"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="173"/>
        <source>Privacy</source>
        <translation>Privacy</translation>
    </message>
</context>
<context>
    <name>Adif</name>
    <message>
        <location filename="../adif.cpp" line="442"/>
        <source>Uploaded</source>
        <translation type="unfinished">Trasferito</translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="442"/>
        <source>Do not Upload</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="442"/>
        <source>Modified</source>
        <translation type="unfinished">Modificato</translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="452"/>
        <source>Sent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="452"/>
        <source>Do not send</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="452"/>
        <location filename="../adif.cpp" line="462"/>
        <source>Requested</source>
        <translation type="unfinished">Richiesto</translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="452"/>
        <source>Queued</source>
        <translation type="unfinished">In coda</translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="452"/>
        <location filename="../adif.cpp" line="462"/>
        <source>Invalid/Ignore</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="462"/>
        <source>Yes</source>
        <translation type="unfinished">Sì</translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="462"/>
        <source>No</source>
        <translation type="unfinished">No</translation>
    </message>
    <message>
        <location filename="../adif.cpp" line="462"/>
        <source>Verified</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AdifLoTWExportWidget</name>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="95"/>
        <source>Select the Station Callsign that you want to use to upload the log.</source>
        <translation>Scegli il nominativo di stazione da usare durante il trasferimento del log.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="99"/>
        <source>Select the start date to export the QSOs. The default date is the date of the first QSO with this station callsign.</source>
        <translation>Scegli la data di inizio dei QSO da esportare. Se non specificato diversamente userò semplicemente il primo QSO disponibile con il nominativo indicato.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="103"/>
        <source>Select the end date to export the QSOs. The default date is the date of the last QSO with this station callsign.</source>
        <translation>Scegli la data di fine dei QSO da esportare. Se non specificato diversamente userò semplicemente l&apos;ultimo QSO disponibile con il nominativo indicato.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="106"/>
        <source>Station callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="109"/>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="127"/>
        <source>My Locator</source>
        <translation>Il mio Locator</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="112"/>
        <source>Start date</source>
        <translation>Data di inizio</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="115"/>
        <source>End date</source>
        <translation>Data di fine</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="117"/>
        <source>Ok</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="118"/>
        <source>Cancel</source>
        <translation>Annulla</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="127"/>
        <source>DX</source>
        <translation>DX</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="127"/>
        <source>Date/Time</source>
        <translation>Data/Ora</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="127"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="127"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="210"/>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="274"/>
        <source>Not defined</source>
        <translation>Non specificato</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="215"/>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="275"/>
        <source>ALL</source>
        <translation>Tutto</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="410"/>
        <source>QSOs: %1/%2</source>
        <translation>QSO: %1/%2</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="658"/>
        <source>KLog Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="658"/>
        <source>There are no queued QSOs.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>All</source>
        <translation type="vanished">Tutti</translation>
    </message>
    <message>
        <source>QSOs: </source>
        <translation type="vanished">Elenco QSO: </translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="689"/>
        <source>KLog - QSOs to be uploaded to LoTW.</source>
        <translation>KLog - QSO da trasferire su LoTW.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="690"/>
        <source>This table shows the QSOs that will be sent to LoTW.</source>
        <translation>Questo elenco contiene i QSO trasferiti a LOTW.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="694"/>
        <source>KLog - QSOs to be uploaded to ClubLog.</source>
        <translation>KLog. QSO da trasferire su ClubLog.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="695"/>
        <source>This table shows the QSOs that will be sent to ClubLog.</source>
        <translation>Questo elenco contiene i QSO che saranno trasferiti a ClubLog.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="699"/>
        <source>KLog - QSOs to be uploaded to eQSL.cc.</source>
        <translation>KLog. QSO da trasferire su eQSL.cc.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="700"/>
        <source>This table shows the QSOs that will be sent to eQSL.cc.</source>
        <translation>Questo elenco contiene i QSO che saranno trasferiti su eQSL.cc.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="704"/>
        <source>KLog - QSOs to be uploaded to QRZ.com.</source>
        <translation>KLog. QSO da trasferire su QRZ.com.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="705"/>
        <source>This table shows the QSOs that will be sent to QRZ.com.</source>
        <translation>Questo elenco contiene i QSO che saranno trasferiti a QRZ.com.</translation>
    </message>
    <message>
        <location filename="../widgets/adiflotwexportwidget.cpp" line="710"/>
        <source>This table shows the QSOs that will be exported to ADIF.</source>
        <translation>Questo elenco contiene i QSO esportati verso ADIF.</translation>
    </message>
</context>
<context>
    <name>Awards</name>
    <message>
        <location filename="../awards.cpp" line="1311"/>
        <source>A</source>
        <comment>Do not translate</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="1312"/>
        <source>ATNO</source>
        <comment>All Time New One, Do not translate</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="1315"/>
        <source>N</source>
        <comment>Needed, please try to keep the N</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="1316"/>
        <source>Needed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="1319"/>
        <source>W</source>
        <comment>Worked, please try to keep the W</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="1320"/>
        <source>Worked</source>
        <translation type="unfinished">Processato</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="1323"/>
        <source>C</source>
        <comment>Confirmed, please try to keep the C</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="1324"/>
        <source>Confirmed</source>
        <translation type="unfinished">Confermato</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="1328"/>
        <source>U</source>
        <comment>Unknown</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="1329"/>
        <source>Unknown</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AwardsWidget</name>
    <message>
        <location filename="../awardswidget.cpp" line="97"/>
        <source>Recalculate</source>
        <translation>Ricalcolo</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="98"/>
        <source>Click to recalculate the award status.</source>
        <translation>Click per ricalcolare stato riconoscimenti.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="99"/>
        <location filename="../awardswidget.cpp" line="294"/>
        <source>Select the year you want to check.</source>
        <translation>Scegli quale anno vuoi controllare.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="101"/>
        <location filename="../awardswidget.cpp" line="122"/>
        <source>QSOs</source>
        <translation>Lista QSO</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="102"/>
        <location filename="../awardswidget.cpp" line="113"/>
        <source>DXCC</source>
        <translation>DXCC</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="103"/>
        <source>CQ</source>
        <translation>CQ</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="105"/>
        <source>Award</source>
        <translation>Riconoscimento</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="107"/>
        <source>Confirmed</source>
        <translation>Confermato</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="110"/>
        <source>Worked</source>
        <translation>Processato</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="116"/>
        <source>WAZ</source>
        <translation>WAZ</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="187"/>
        <source>Score</source>
        <translation>Punteggio</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="188"/>
        <location filename="../awardswidget.cpp" line="408"/>
        <source>Annual</source>
        <translation>Annuale</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="281"/>
        <source>Number of confirmed DXCC entities.</source>
        <translation>Numero di collegamenti DXCC confermati.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="282"/>
        <source>Number of worked DXCC entities.</source>
        <translation>Numero di collegamenti DXCC processati.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="283"/>
        <source>Number of confirmed WAZ zones.</source>
        <translation>Numero di zone WAZ confermate.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="284"/>
        <source>Number of worked WAZ zones.</source>
        <translation>Numero di zone WAZ processate.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="287"/>
        <source>Number of confirmed QSOs.</source>
        <translation>Numero di QSO confermati.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="288"/>
        <source>Number of worked QSOs.</source>
        <translation>Numero di QSO processati.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="290"/>
        <source>Number of QSOs worked in the selected year.</source>
        <translation>Numero QSO processati durante l&apos;anno indicato.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="291"/>
        <source>Number of DXCCs worked in the selected year.</source>
        <translation>Numero di DXCC processati durante l&apos;anno indicato.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="292"/>
        <source>Number of CQ Zones worked in the selected year.</source>
        <translation>Numero di zone CQ processate durante l&apos;anno indicato.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="293"/>
        <source>Score for the DXMarathon in the selected year.</source>
        <translation>Punteggio numerico nella DX marathon durante l&apos;anno indicato.</translation>
    </message>
    <message>
        <location filename="../awardswidget.cpp" line="401"/>
        <source>DX-Marathon</source>
        <translation>DX-Marathon</translation>
    </message>
</context>
<context>
    <name>CTYPage</name>
    <message>
        <location filename="../startwizard.cpp" line="915"/>
        <source>Country data download</source>
        <translation>Scarico Country</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="918"/>
        <source>KLog needs country data...</source>
        <translation>Dati Country richiesti da KLog...</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="924"/>
        <source>&amp;Download</source>
        <translation>&amp;Scarica</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="925"/>
        <source>&amp;Ignore</source>
        <translation>&amp;Ignora</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="944"/>
        <source>Country data needed</source>
        <translation>Dati Country richiesti</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="947"/>
        <source>KLog uses the cty.csv file from https://www.country-files.com/ to get DXCC information.</source>
        <translation>KLog utilizza il file cty.csv disponibile su https://www.country-files.com/ per ottenere informaizoni sui DXCC.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="949"/>
        <source>You need to download the cty.csv file if you want KLog to show you the countries, locator, etc. of the QSOs you do.</source>
        <translation>Se vuoi che KLog mostri countries, locator, ecc nell&apos;elenco QSO è indispensabile scaricare il file cty.cvs.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="951"/>
        <source>Click on Download to download now.</source>
        <translation>Clicca su Scarica per avviare immediatamente il trasferimento.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="1026"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="1027"/>
        <source>I can&apos;t find the host. Please check your network and try again
Do you want to try again?</source>
        <translation>Il server è irraggiungibile. Verifica la conenssione di rete e riprova
Vuoi riprovare?</translation>
    </message>
</context>
<context>
    <name>DXCCStatusWidget</name>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="93"/>
        <source>Update</source>
        <translation>Aggiornamento</translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="134"/>
        <source>It seems that the DXCC status in your database is not updated and KLog can&apos;t find any dxcc information. You can try to fix this by updating the log.</source>
        <translation>Sembra che lo stato DXCC nel tuo database non sia aggiornato e qundi KLog non riesce a trovare alcuna informazione dxcc. Puoi provare a risolvere questo problema aggiornando il lof.</translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="135"/>
        <source>Do you want to update your DXCC status?</source>
        <translation>Vuoi aggiornare ul tuo status DXCC?</translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="336"/>
        <source>Entity</source>
        <translation>Elemento</translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="336"/>
        <source>Prefix</source>
        <translation>Prefisso</translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="537"/>
        <source>Pref: </source>
        <translation>Pref: </translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="538"/>
        <source>CQ: </source>
        <translation>CQ: </translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="539"/>
        <source>ITU: </source>
        <translation>ITU: </translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="541"/>
        <source>Beam: </source>
        <translation>Beam: </translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="548"/>
        <source>Entity not worked in this band.</source>
        <translation>Collegamento non processato per questa banda.</translation>
    </message>
</context>
<context>
    <name>DXClusterAssistant</name>
    <message>
        <location filename="../dxcluster/dxclusterassistant.cpp" line="61"/>
        <source>DX</source>
        <translation type="unfinished">DX</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxclusterassistant.cpp" line="61"/>
        <source>Freq</source>
        <translation type="unfinished">Frequenza</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxclusterassistant.cpp" line="61"/>
        <source>Status</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DXClusterWidget</name>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="55"/>
        <source>Click on Connect to connect to the DX-Cluster server</source>
        <translation>Clicca su Connetti per collegarti immediatamente al server DX-Cluter</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="59"/>
        <location filename="../dxcluster/dxcluster.cpp" line="489"/>
        <source>Connect</source>
        <translation>Connetti</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="60"/>
        <location filename="../dxcluster/dxcluster.cpp" line="471"/>
        <location filename="../dxcluster/dxcluster.cpp" line="546"/>
        <source>Clear</source>
        <translation>Pulisci</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="108"/>
        <source>Check in QRZ.com</source>
        <translation>Controlla su QRZ.com</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="110"/>
        <source>Check this callsign in QRZ.com</source>
        <translation>Controlla questo nominativo su QRZ.com</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="143"/>
        <location filename="../dxcluster/dxcluster.cpp" line="174"/>
        <source>Click on connect to connect to the DX-Cluster</source>
        <translation>Clicca su Connetti per collegarti immediatamente al DX-Cluster</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="211"/>
        <source>Trying to connect to the server</source>
        <translation>Tentativo di connessione al server in corso</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="239"/>
        <source>KLog DXCluster</source>
        <translation>KLog DXCluster</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="224"/>
        <source>The host was not found. Please check:</source>
        <translation>Server irraggiungibile. Controlla:</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="142"/>
        <source>Clears the DXCluster command line.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="221"/>
        <source>The DXCluster server desconnected the session.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="225"/>
        <source>- your network connection;
- the host name and port settings.</source>
        <translation>- la tua configurazione di rete;
 -la configurazione del nome del server ed il numero di porta.</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="229"/>
        <source>The connection was refused by the peer. Make sure the DXCluster server is running, and check that the host name and port settings are correct.</source>
        <translation>La conenssione è stata rifiutata dall&apos;altro lato. Verifica che il server DXCluster sia effettivamente in esecuzione, e controlla nome del server host e porta impostati.</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="235"/>
        <source>The following error occurred: %1.</source>
        <translation>Appena verificato l&apos;errore: %1.</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="439"/>
        <source>Connected to server</source>
        <translation>Connesso al server</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="446"/>
        <location filename="../dxcluster/dxcluster.cpp" line="457"/>
        <source>KLog message</source>
        <translation>Messaggio KLog</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="447"/>
        <source>Enter your callsign to connect to the cluster:</source>
        <translation>Scegli il nominativo da usare per la connessione al cluster:</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="458"/>
        <source>Enter your password to connect to the cluster:
(Just hit enter for no password)</source>
        <translation>Inserisci la password di connessione al cluster:
(dai direttamente Invio se non serve una password)</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="470"/>
        <location filename="../dxcluster/dxcluster.cpp" line="511"/>
        <location filename="../dxcluster/dxcluster.cpp" line="542"/>
        <source>Disconnect</source>
        <translation>Scollega</translation>
    </message>
    <message>
        <source>Not logged on, you may need to enter your callsign again.</source>
        <translation type="vanished">Non collegato, può essere necessario reinserire il nominativo.</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="478"/>
        <source>Enter here the commands to be sent to the DX-Cluster server.</source>
        <translation>Inserisci i comandi da trasmettere al server DX-Clouster.</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="485"/>
        <source>Connection closed by the server</source>
        <translation>Collegamento terminato dal server</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="491"/>
        <source>Click on Connect to connect to the DX-Cluster server.</source>
        <translation>Clicca per avviare il collegamento al server DX-Cluster.</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="544"/>
        <source>Send</source>
        <translation>Invia</translation>
    </message>
    <message>
        <location filename="../dxcluster/dxcluster.cpp" line="757"/>
        <source>It was not possible to open the file to save the DX-Spots for writing. DX-Cluster activity will not be saved!</source>
        <translation>Impossibile aprire il file per annotare i collegamenti DX sul server DX-Cluster!</translation>
    </message>
</context>
<context>
    <name>DataProxy_SQLite</name>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="149"/>
        <source>Software version in DB is null</source>
        <translation>Versione software nel DB non inserita</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4138"/>
        <source>Aircraft Scatter</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Aircraft Scatter</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4142"/>
        <source>Aurora</source>
        <translation>Aurora</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4146"/>
        <source>Aurora-E</source>
        <translation>Aurora-E</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4150"/>
        <source>Back scatter</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Back scatter</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4154"/>
        <source>Earth-Moon-Earth</source>
        <translation>Terra-Luna-Terra</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4158"/>
        <source>Sporadic E</source>
        <translation>E sporadico</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4170"/>
        <source>Internet-assisted</source>
        <translation>Internet-assisted</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4174"/>
        <source>Ionoscatter</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Ionoscatter</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4178"/>
        <source>Meteor scatter</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Meteor scatter</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4182"/>
        <source>Terrestrial or atmospheric repeater or transponder</source>
        <translation>Terrestrial or atmospheric repeater or transponder</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4186"/>
        <source>Rain scatter</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Rain scatter</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4190"/>
        <source>Satellite</source>
        <translation>Satellite</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4899"/>
        <source>Bureau</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Bureau</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4911"/>
        <source>Manager</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Manager</translation>
    </message>
    <message>
        <source>All QSOs have been updated with a DXCC and the Continent.</source>
        <translation type="vanished">Tutti i QSO e dil Continente aggiornati con DXCC.</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4162"/>
        <source>Field Aligned Irregularities</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Field Aligned Irregularities</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="149"/>
        <source>Query didn&apos;t failed</source>
        <translation>Query non fallita</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4166"/>
        <source>F2 Reflection</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>F2 Reflection</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4194"/>
        <source>Trans-equatorial</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Trans-equatorial</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4198"/>
        <source>Tropospheric ducting</source>
        <comment>Common term in hamradio, do not translate if not sure</comment>
        <translation>Tropospheric ducting</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation type="vanished">Sì</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="vanished">No</translation>
    </message>
    <message>
        <source>Requested</source>
        <translation type="vanished">Richiesto</translation>
    </message>
    <message>
        <source>Ignore/Invalid</source>
        <translation type="vanished">Ignorare/Invalido</translation>
    </message>
    <message>
        <source>Validated</source>
        <translation type="vanished">Validato</translation>
    </message>
    <message>
        <source>Queued</source>
        <translation type="vanished">In coda</translation>
    </message>
    <message>
        <source>Uploaded</source>
        <translation type="vanished">Trasferito</translation>
    </message>
    <message>
        <source>Do not upload</source>
        <translation type="vanished">Non trasferito</translation>
    </message>
    <message>
        <source>Modified</source>
        <translation type="vanished">Modificato</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4903"/>
        <source>Direct</source>
        <translation>Diretto</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="4907"/>
        <source>Electronic</source>
        <translation>Electronic</translation>
    </message>
    <message>
        <source>KLog DXCC</source>
        <translation type="vanished">KLog-DXCC</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="7597"/>
        <source>KLog - Invalid call detected</source>
        <translation>KLog - Chiamata non valida rilevata</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="7603"/>
        <source>An empty callsign has been detected. Do you want to export this QSO anyway (click on Yes) or remove the field from the exported ADIF record?</source>
        <translation>Nominativo bianco rilevato. Vuoi esportare comunque questo QSO (clicca su Sì) oppure vuoi cancellare l&apos;elemento per non esportarlo su ADIF?</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="7607"/>
        <source>An invalid callsign has been detected %1. Do you want to export this callsign anyway (click on Yes) or remove the call from the exported log?</source>
        <translation>Un nominatico con formato non valido è stato rilevato %1, Vuoi esportare questo nominativo comunque (clocca su Sì) oppure vuoi evitare che sia esportato sul log?</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="7611"/>
        <source>Exporting wrong calls may create problems in the applications you are potentially importing this logfile to. It may, however, be a good callsign that is wrongly identified by KLog as not valid.</source>
        <translation>Esportare un nominativo sbagliato può causare concreti problemi nell&apos;applicazione che importa questo log, sebbene sia sempre possibile che questo sia un nominativo valido erroneamente identificato da KLog.</translation>
    </message>
</context>
<context>
    <name>DownLoadCTY</name>
    <message>
        <location filename="../downloadcty.cpp" line="93"/>
        <source>Download of cty.csv failed with the following error code: </source>
        <translation>Scarico di cty.csv fallito con il codice di errore: </translation>
    </message>
    <message>
        <location filename="../downloadcty.cpp" line="105"/>
        <source>Download of cty.csv done.</source>
        <translation>Scarico di cty.cvs completato.</translation>
    </message>
    <message>
        <location filename="../downloadcty.cpp" line="174"/>
        <source>There is already a cty.csv file in the folder but it will be replaced with the new one.</source>
        <translation>E&apos; già presente un file cty.cvs nella cartella ma sarà sovrascritto dal nuovo.</translation>
    </message>
    <message>
        <location filename="../downloadcty.cpp" line="201"/>
        <source>Could not open %1 for writing</source>
        <translation>Impossibile aprire %1 per scrittura</translation>
    </message>
</context>
<context>
    <name>FileAwardManager</name>
    <message>
        <location filename="../fileawardmanager.cpp" line="46"/>
        <source>Open Award file</source>
        <translation>Apre file Award</translation>
    </message>
    <message>
        <location filename="../fileawardmanager.cpp" line="46"/>
        <source>Award files (*.awa)</source>
        <translation>Files Award (*.awa)</translation>
    </message>
    <message>
        <location filename="../fileawardmanager.cpp" line="52"/>
        <source>Award file not opened</source>
        <translation>File Award non aperto</translation>
    </message>
    <message>
        <location filename="../fileawardmanager.cpp" line="52"/>
        <source>KLog was not able to read the award file</source>
        <translation>KLog non è riuscito a leggere il file award</translation>
    </message>
    <message>
        <location filename="../fileawardmanager.cpp" line="52"/>
        <source>It was not possible to open the file %1 for reading.</source>
        <translation>Non è stato possibile aprire il file %1 in lettura.</translation>
    </message>
    <message>
        <location filename="../fileawardmanager.cpp" line="95"/>
        <source>AWA wrong format</source>
        <translation>AWA formato sbagliato</translation>
    </message>
    <message>
        <location filename="../fileawardmanager.cpp" line="95"/>
        <source>The AWA file does not have the right format</source>
        <translation>Il file AWA non è composto nel corretto formato</translation>
    </message>
    <message>
        <location filename="../fileawardmanager.cpp" line="95"/>
        <source>AWA file does not have an &lt;EOH&gt; field</source>
        <translation>Il file AWA non ha un campo &lt;EOH&gt;</translation>
    </message>
    <message>
        <location filename="../fileawardmanager.cpp" line="237"/>
        <source>KLog - %1</source>
        <translation>KLog - %1</translation>
    </message>
</context>
<context>
    <name>FileManager</name>
    <message>
        <location filename="../filemanager.cpp" line="380"/>
        <location filename="../filemanager.cpp" line="572"/>
        <source>Writing ADIF file...</source>
        <translation>File ADIF in scrittura...</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="380"/>
        <location filename="../filemanager.cpp" line="572"/>
        <source>Abort writing</source>
        <translation>Scrittura annullata</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="406"/>
        <location filename="../filemanager.cpp" line="596"/>
        <source>Writing ADIF file...
 QSO: </source>
        <translation>File ADIF in scrittura...
 QSO: </translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="415"/>
        <location filename="../filemanager.cpp" line="608"/>
        <source>You have canceled the file export. The file will be removed and no data will be exported.</source>
        <translation>Operazione di export annullata. File cancellato e niente export.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="153"/>
        <source>KLog - Error</source>
        <translation>KLog - Errore</translation>
    </message>
    <message>
        <source>The selected log does not exist, please check it again.</source>
        <translation type="vanished">Non trovo il log scelto. Ricontrolla.</translation>
    </message>
    <message>
        <source>The file %1 can&apos;t be opened.</source>
        <translation type="vanished">Impossibile aprire il file %1.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="415"/>
        <location filename="../filemanager.cpp" line="608"/>
        <source>Do you still want to cancel?</source>
        <translation>Sei ancora convinto di annullare?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="817"/>
        <source> QSO: </source>
        <translation> QSO: </translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="414"/>
        <location filename="../filemanager.cpp" line="607"/>
        <location filename="../filemanager.cpp" line="887"/>
        <source>KLog - User cancelled</source>
        <translation>KLog - Annullato dall&apos;utente</translation>
    </message>
    <message>
        <source>Exporting ADIF file...
 QSO: %1 / %2 </source>
        <translation type="vanished">Export file ADIF...
 QSO: %1 / %2 </translation>
    </message>
    <message>
        <source>Reading LoTW file...</source>
        <translation type="vanished">File LoTW in lettura...</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="773"/>
        <source>Reading ADIF file...</source>
        <translation>File ADIF in lettura...</translation>
    </message>
    <message>
        <source>KLog - Duplicated QSOs</source>
        <translation type="vanished">KLog - QSO duplicati</translation>
    </message>
    <message>
        <source>Please edit the ADIF file and make sure that it include at least:</source>
        <translation type="vanished">Per favore correggi il file ADIF ed accertati che contenga almeno:</translation>
    </message>
    <message>
        <source>and</source>
        <translation type="vanished">e</translation>
    </message>
    <message>
        <source>This QSO had:</source>
        <translation type="vanished">Questo QSO aveva:</translation>
    </message>
    <message>
        <source>KLog - No Station callsign entered.</source>
        <translation type="vanished">KLog - Nessun nominativo di stazione inserito.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1112"/>
        <location filename="../filemanager.cpp" line="1117"/>
        <source>KLog - QSO without Station Callsign</source>
        <translation>KLog - QSO senza nominativo di stazione definito</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="773"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <source>There is more than one log in this logfile.</source>
        <translation type="vanished">Questo log file contiene più di 1 voce.</translation>
    </message>
    <message>
        <source>All logs will be imported into the current log.</source>
        <translation type="vanished">Tutte le voci saranno importante nell&apos;attuale log.</translation>
    </message>
    <message>
        <source>Do you want to continue?</source>
        <translation type="vanished">Vuoi proseguire?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="817"/>
        <source>Importing ADIF file...</source>
        <translation>Import di file ADIF file in corso...</translation>
    </message>
    <message>
        <source>It seems that there are some duplicated QSOs in the ADIF file you are importing. Do you want to continue? (Duped QSOs will not be imported)</source>
        <translation type="vanished">QSO duplicati nel file ADIF che stai importando. Vuoi continuare comunque? (i QSO duplicati non saranno importati)</translation>
    </message>
    <message>
        <source>KLog - Log selection</source>
        <translation type="vanished">KLog - Log scelta</translation>
    </message>
    <message>
        <source>You have canceled the file import. The file will be removed and no data will be imported.</source>
        <translation type="vanished">Import annullato. File rcancellato e nessun dato importato.</translation>
    </message>
    <message>
        <source>There are no QSOs pending to be exported with that station callsign.</source>
        <translation type="vanished">Non ci sono QSO in attesa di export con il nominativo indicato.</translation>
    </message>
    <message>
        <source>Export</source>
        <translation type="vanished">Export</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="383"/>
        <location filename="../filemanager.cpp" line="575"/>
        <source>Export progress</source>
        <translation>Progresso export</translation>
    </message>
    <message>
        <source>Processing LoTW ADIF file...</source>
        <translation type="vanished">Lavorazione file LoTW ADIF...</translation>
    </message>
    <message>
        <source>Abort processing</source>
        <translation type="vanished">Interruzione lavorazione</translation>
    </message>
    <message>
        <source>LoTW reading</source>
        <translation type="vanished">Lettura LoTW</translation>
    </message>
    <message>
        <source>KLog - Add new QSOs?</source>
        <translation type="vanished">KLog - Aggiunge nuovi QSO?</translation>
    </message>
    <message>
        <source>Do you want to add non existing QSOs to your local log?</source>
        <translation type="vanished">Vuoi aggiungere i QSO non ancora presenti nel tuo log locale?</translation>
    </message>
    <message>
        <source>There are some QSOs in the LoTW log that are not in your local log.</source>
        <translation type="vanished">Esistono QSO nel log LoTW assenti dal tuo log locale.</translation>
    </message>
    <message>
        <source>Processing LoTW ADIF file......
 QSO: %1 / %2 </source>
        <translation type="vanished">Lavorazione LoTW ADIF file....
 QSO: %1 / %2 </translation>
    </message>
    <message>
        <source>You have canceled the LoTW processing. The process will be stopped and your log may not be completely updated.</source>
        <translation type="vanished">Hai annullato l&apos;operazione LoTW. L&apos;operazione sarà arestata e il tuo log potrebbe non essere completamente aggiornato.</translation>
    </message>
    <message>
        <source>Do you want to add dupe QSOs to your local log?</source>
        <translation type="vanished">Vuoi aggiungere QSO duplicati al tuo log locale?</translation>
    </message>
    <message>
        <source>There are some QSOs in this logfile that may be dupes as they have same call, band &amp; mode and a very close date.</source>
        <translation type="vanished">Questo log file contiene QSO che possono essere duplicati in quanto con identico nominativbo, banda &amp; modalità e una data molto ravvicinata.</translation>
    </message>
    <message>
        <source>Click on Yes to add a default %1 for mode %2 to all QSOs with a similar problem.</source>
        <translation type="vanished">Clicca su Sì per aggiungere una voce default %1 per il modo %2 a tutti i QSO con identico problema.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="888"/>
        <source>You have canceled the file import. The file will be removed and no data will be imported.
Do you still want to cancel?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1476"/>
        <source>KLog - Don&apos;t ask again</source>
        <translation>KLog - Non chiedere ancora</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1478"/>
        <source>Do you want to reuse your answer?</source>
        <translation>Vuoi riciclare la tua risposta?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1479"/>
        <source>KLog will use automatically your previous answer for any other similar ocurrence, if any, without asking you again.</source>
        <translation>KLog utilizzerà automaticamente la tua precedente risposta per ogni altro riferimento simile, se trovato, senza richiedertelo.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1502"/>
        <source>&lt;ul&gt;&lt;li&gt;Date/Time:&lt;/i&gt; %1&lt;/li&gt;&lt;li&gt;Callsign: %2&lt;/li&gt;&lt;li&gt;Band: %3&lt;/li&gt;&lt;li&gt;Mode: %4&lt;/li&gt;&lt;/ul&gt;</source>
        <translation>&lt;ul&gt;&lt;li&gt;Data/Ora:&lt;/i&gt; %1&lt;/li&gt;&lt;li&gt;Nominativo: %2&lt;/li&gt;&lt;li&gt;Banda: %3&lt;/li&gt;&lt;li&gt;Modo: %4&lt;/li&gt;&lt;/ul&gt;</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1506"/>
        <source>KLog - QSO not found</source>
        <translation>KLog - QSO non trovato</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1508"/>
        <source>Do you want to add this QSO to the log?:

</source>
        <translation>Aggiungo questo QSO al log?:

</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1509"/>
        <source>We have found a QSO coming from LoTW that is not in your local log.

Do you want KLog to add this QSO to the log?</source>
        <translation>Trovato un QSO proveniente da LoTW assente dal tuo log locale.

Aggiungo questo QSO al log?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1531"/>
        <source>KLog - Invalid call detected</source>
        <translation>KLog - Chiamata invalida trovata</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1537"/>
        <source>An empty callsign has been detected. Do you want to export this QSO anyway (click on Yes) or remove the field from the exported log file?</source>
        <translation>Manca il nominativo. Esporto comunque il QSO (clicca su Sì) o rimuove il campo dal file log esportato?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1541"/>
        <source>An invalid callsign has been detected %1. Do you want to export this callsign anyway (click on Yes) or remove the call from the exported log file?</source>
        <translation>Nominativo invalido trovato %1. Vuoi esportare questo nominativo comunque (scegli Sì) oppure vuoi rimuovere la voce dal file export?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1544"/>
        <source>Exporting wrong calls may create problems in the applications you are potentially importing this logfile to. It may, however, be a good callsign that is wrongly identified by KLog as not valid. You can, however, edit the ADIF file once the export process is finished.</source>
        <translation>Esportare chiamate invalide può provocare inconvenienti successivamente, quando poi il file sarà importato. Però un nominativo può essere corretto e Klog in errore. Pertanto è sempre possibile proseguire e correggere il nominativo successivamente, una volta completato l&apos;export.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="179"/>
        <source>The selected callsign (%1) is not valid, please check it again to export the log.</source>
        <translation>Nominativo scelto invalido (%1), verificalo di nuovo prima di esportare il log.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="689"/>
        <source>KLog - File not opened</source>
        <translation>KLog - File non aperto</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="690"/>
        <source>It was not possible to open the file %1 for reading.</source>
        <translation>Impossibile aprire il file %1 in lettura.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="691"/>
        <source>KLog was not able to read the LoTW file</source>
        <translation>Impossibile leggere il file LoTW</translation>
    </message>
    <message>
        <source>Importing LoTW ADIF file...</source>
        <translation type="vanished">Import file loTW in corso...</translation>
    </message>
    <message>
        <source>This QSO is not including the minimum data to consider a QSO as valid!</source>
        <translation type="vanished">Questo QSO non contiene il numero minimo di campi compilati necessari che rendono un QSO valido!</translation>
    </message>
    <message>
        <source> - The band missing and the following call: </source>
        <translation type="vanished"> - collegamento senza la banda specificata: </translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1111"/>
        <source>KLog has found one QSO without the Station Callsign defined.

Enter the Station Callsign that was used to do this QSO with %1 on %2:</source>
        <translation>KLog ha trovato un QSO senza il nominativo di stazione caricato.

Scegli il nominativo di stazione per questo QSO fra %1 e %2:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="1118"/>
        <source>KLog has found one QSO without the Station Callsign defined.

Enter the Station Callsign that was used to do this QSO on %1:</source>
        <translation>KLog ha trovato un QSO senza il nominativo di stazione caricato.

Scegli il nominativo di stazione per questo QSO su %1:</translation>
    </message>
    <message>
        <source> - The mode missing and the following call: </source>
        <translation type="vanished"> - chiamata senza modo operativo specificato: </translation>
    </message>
    <message>
        <source> - The date missing and the following call: </source>
        <translation type="vanished"> - chiamata senza la data indicata: </translation>
    </message>
    <message>
        <source> - The time missing and the following call: </source>
        <translation type="vanished"> - chiamata senza l&apos;ora indicata: </translation>
    </message>
    <message>
        <source>Do you want to continue with the current file?</source>
        <translation type="vanished">Vuoi proseguire con il file corrente?</translation>
    </message>
    <message>
        <source>KLog: Not all required data found!</source>
        <translation type="vanished">KLOg: Dati necessari mancanti!</translation>
    </message>
    <message>
        <source>Some QSOs of this log, (i.e.: %1) seems to lack RST-TX information.</source>
        <translation type="vanished">In alcuni QSO di questo log (es. %1) mancano le informazioni RST-TX.</translation>
    </message>
    <message>
        <source>If you select NO, maybe the QSO will not be imported.</source>
        <translation type="vanished">Scegliendo No il QSO non sarà importato.</translation>
    </message>
    <message>
        <source>Some QSOs of this log, (i.e.: %1) seems to lack RST-RX information.</source>
        <translation type="vanished">In alcuni QSO di questo log (es. %1) mancano le informazioni RST-RX.</translation>
    </message>
    <message>
        <source>KLog - Apply to all QSOs in this log?</source>
        <translation type="vanished">KLog - Applica a tutti i QSO di questo log?</translation>
    </message>
    <message>
        <source>KLog: No RST TX found!</source>
        <translation type="vanished">KLog: Non trovato RST TX!</translation>
    </message>
    <message>
        <source>KLog: No RST RX found!</source>
        <translation type="vanished">KLog: Non trovato RST RX!</translation>
    </message>
</context>
<context>
    <name>HamLibNetworkConfigWidget</name>
    <message>
        <location filename="../setuppages/hamlibnetworkconfigwidget.cpp" line="15"/>
        <location filename="../setuppages/hamlibnetworkconfigwidget.cpp" line="21"/>
        <source>Enter the hostname or address of the radio.</source>
        <translation>Inserisci l&apos;hostname o l&apos;indirizzo della radio.</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibnetworkconfigwidget.cpp" line="16"/>
        <source>Set de network port of the radio.</source>
        <translation>Imposta la porta di rete della radio.</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibnetworkconfigwidget.cpp" line="19"/>
        <source>Host/Address</source>
        <translation>Host/Indirizzo</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibnetworkconfigwidget.cpp" line="25"/>
        <source>Port</source>
        <translation>Porta</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibnetworkconfigwidget.cpp" line="27"/>
        <source>Enter the port of the radio.</source>
        <translation>Inserisci la porta della radio.</translation>
    </message>
</context>
<context>
    <name>HamLibSerialConfigWidget</name>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="25"/>
        <source>Bauds</source>
        <translation>Bauds</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="27"/>
        <source>Select the serial port speed.</source>
        <translation>Seleziona la velocità di comunicazione con la porta seriale.</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="31"/>
        <source>Port</source>
        <translation>Porta</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="33"/>
        <source>Select the serial port. Only the serial ports that are detected are shown.</source>
        <translation>Seleziona la porta seriale. Solo le porte seriali realmente trovate sono in elenco.</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="37"/>
        <source>Scan</source>
        <translation>Scansione</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="39"/>
        <source>Click to identify the serial ports available in your computer.</source>
        <translation>Clicca per cercare quali porte seriali sono disponibili sul tuo computer.</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="50"/>
        <source>5 bits</source>
        <translation>5 bit</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="50"/>
        <source>6 bits</source>
        <translation>6 bit</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="50"/>
        <source>7 bits</source>
        <translation>7 bit</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="50"/>
        <source>8 bits</source>
        <translation>8 bit</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="52"/>
        <source>Data bits</source>
        <translation>Data Bit</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="54"/>
        <source>Select the serial data bits.</source>
        <translation>Seleziona il numero di bit usati nella comunicazione via seriale.</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="60"/>
        <source>None</source>
        <translation>Vuoto</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="60"/>
        <source>Hardware</source>
        <translation>Hardware</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="60"/>
        <source>Software XON/XOFF</source>
        <translation>Software XON/XOFF</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="62"/>
        <source>Flow control</source>
        <translation>Controllo di flusso (flow control)</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="64"/>
        <source>Select the serial flow control</source>
        <translation>Seleziona il tipo di controllo di flusso</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="71"/>
        <source>No parity</source>
        <translation>Nessuna parità</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="71"/>
        <source>Even</source>
        <translation>Even</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="71"/>
        <source>Odd</source>
        <translation>Odd</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="71"/>
        <source>Space</source>
        <translation>Spazio</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="71"/>
        <source>Mark</source>
        <translation>Mark</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="73"/>
        <source>Parity</source>
        <translation>Parità</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="75"/>
        <source>Select the serial parity.</source>
        <translation>Scegli il bit di parità sulla seriale.</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="82"/>
        <source>1 bit</source>
        <translation>1 bit</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="82"/>
        <source>1.5 bits</source>
        <translation>1,5 bits</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="82"/>
        <source>2 bits</source>
        <translation>2 bits</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="84"/>
        <source>Stop bits</source>
        <translation>Bit di stop</translation>
    </message>
    <message>
        <location filename="../setuppages/hamlibserialconfigwidget.cpp" line="86"/>
        <source>Select the serial stop bits.</source>
        <translation>Seleziona il numero di bit di stop della seriale.</translation>
    </message>
</context>
<context>
    <name>InfoWidget</name>
    <message>
        <location filename="../infowidget.cpp" line="81"/>
        <source>10M</source>
        <translation>10m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="82"/>
        <source>15M</source>
        <translation>15m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="83"/>
        <source>20M</source>
        <translation>20m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="84"/>
        <source>40M</source>
        <translation>40m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="85"/>
        <source>80M</source>
        <translation>80m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="86"/>
        <source>160M</source>
        <translation>160m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="87"/>
        <source>2M</source>
        <translation>2m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="88"/>
        <source>6M</source>
        <translation>6m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="89"/>
        <source>12M</source>
        <translation>12m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="90"/>
        <source>17M</source>
        <translation>17m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="91"/>
        <source>30M</source>
        <translation>30m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="92"/>
        <source>70CM</source>
        <translation>70cm</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="107"/>
        <source>Continent</source>
        <translation>Contienente</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="111"/>
        <source>Prefix</source>
        <translation>Prefisso</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="115"/>
        <source>CQ</source>
        <translation>CQ</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="119"/>
        <source>ITU</source>
        <translation>ITU</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="123"/>
        <source>Short Path</source>
        <translation>Percorso breve</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="126"/>
        <source>Long Path</source>
        <translation>Percorso lungo</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="129"/>
        <location filename="../infowidget.cpp" line="134"/>
        <source>Deg</source>
        <translation>Deg</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="359"/>
        <location filename="../infowidget.cpp" line="360"/>
        <source>Miles</source>
        <translation>Miglia</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="366"/>
        <location filename="../infowidget.cpp" line="367"/>
        <source>Km</source>
        <translation>Km</translation>
    </message>
</context>
<context>
    <name>IntroPage</name>
    <message>
        <location filename="../startwizard.cpp" line="143"/>
        <source>Welcome to KLog!</source>
        <translation>Benvenuto/a su KLog!</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="145"/>
        <source>Welcome to KLog! - brought to you under the terms of the GPL!</source>
        <translation>Benvenuto/a su KLog! -Utilizzabile regolamentato come da licenza GPL!</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="153"/>
        <source>Welcome to KLog</source>
        <translation>Benvenuto/a su KLog</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="154"/>
        <source>This looks like it&apos;s the first time you&apos;ve run KLog on this computer.</source>
        <translation>E&apos; la prima esecuzione di KLog su questo sistema.</translation>
    </message>
    <message>
        <source>KLog is a free hamradio logging program that can run on GNU/Linux, macOS, and Windows.</source>
        <translation type="vanished">KLog è un programma libero di log per uso radio che può funzionare su GNU/Linux, macOS, e Windows.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="155"/>
        <source>KLog is a free hamradio logging program that can run on GNU/Linux, macOS, and Windows. </source>
        <translation>KLog è un software di Log che può girare su GNU/Linux,macOS, e Windows. </translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="156"/>
        <source>It is designed to provide general purpose DX, and contest logging.</source>
        <translation>E&apos; pensato come generico supporto ai DX e log durante i contest.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="157"/>
        <source>It supports QSL management, import and export of ADIF </source>
        <translation>Questo software gestisce le QSL, e importa / esporta in formato ADIF </translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="158"/>
        <source>and Cabrillo file formats and many other features...</source>
        <translation>ed il formato Cabrillo e molto altro...</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="159"/>
        <source>Before you can start using KLog, you will be asked to:</source>
        <translation>Prima di iniziare ad usare KLog, è necessario:</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="160"/>
        <source>Acknowledge to the terms of the license.</source>
        <translation>Conferma dei termini di utilizzo descritti nella licenza.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="161"/>
        <source>Download the DX entities information.</source>
        <translation>Scarica collegamenti DX.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="162"/>
        <source>Enter your callsign, CQ zone, etc. and main configuration.</source>
        <translation>Inserisci nominativo di stazione, zona CQ e tutte le informazioni di base.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="163"/>
        <source>Enjoy KLog and contact the development team if you have any suggestions!</source>
        <translation>Buon lavoro con KLog. Puoi anche contattare lo staff di sviluppo per ogni eventuale proposta o suggerimento!</translation>
    </message>
</context>
<context>
    <name>LicPage</name>
    <message>
        <location filename="../startwizard.cpp" line="183"/>
        <source>KLog License information</source>
        <translation>KLog informazioni sulla licenza</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="186"/>
        <source>Welcome to KLog!- brought to you under the terms of the GPL!</source>
        <translation>Benvenuto/a su KLog! -Utilizzabile regolamentato come da licenza GPL!</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="827"/>
        <source>Acknowledge</source>
        <translation>Conferma</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="828"/>
        <source>Be aware that KLog is free software.</source>
        <translation>KLog è sviluppato come software libero.</translation>
    </message>
</context>
<context>
    <name>LoTWUtilities</name>
    <message>
        <location filename="../lotwutilities.cpp" line="111"/>
        <source>KLog - LoTW password needed</source>
        <translation>KLog - password LoTW necessaria</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="112"/>
        <source>Please enter your LoTW password: </source>
        <translation>Per favore inserisci la tua password LoTW: </translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="253"/>
        <location filename="../lotwutilities.cpp" line="380"/>
        <source>There is a file already existing with the name that will be used.</source>
        <translation>Esiste già un file di nome identico a quello che vorresti usare.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="254"/>
        <location filename="../lotwutilities.cpp" line="381"/>
        <source>The file %1 already exist. Do you want to overwrite?</source>
        <translation>Il file %1 esiste già. Posso sovrascriverlo?</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="280"/>
        <location filename="../lotwutilities.cpp" line="407"/>
        <source>KLog was not able to save the file %1.
Error returned: %2</source>
        <translation>KLog non riesce a salvare il file %1.
Codice di errore restituito: %2</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="299"/>
        <location filename="../lotwutilities.cpp" line="426"/>
        <source>Downloading data to file: %1.</source>
        <translation>Scarico informazioni nel file: %1.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="301"/>
        <location filename="../lotwutilities.cpp" line="428"/>
        <location filename="../lotwutilities.cpp" line="689"/>
        <source>KLog - LoTW download</source>
        <translation>KLog - Scarico LoTW</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="335"/>
        <source>This is the first date of a QSO with the callsign %1 in this log If you think that in LoTW you may have previous QSOs, answer No.</source>
        <translation>Questa è la prima data di un QSO con il nominativo %1 nel log, se pensi che su LoTW possano esserci precedenti QSO, rispondi No.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="336"/>
        <source>Do you want to use this date (%1) as start date?</source>
        <translation>Vuoi utilizzare questa data (%1) come data di partenza?</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="524"/>
        <source>The remote server redirected our connection to %1</source>
        <translation>Redirezione connessione al server %1</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="525"/>
        <source>Do you want to follow the redirection?</source>
        <translation>Vuoi seguire la redirezione?</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="601"/>
        <source>It was not possible for find the file %1 that has been just downloaded.</source>
        <translation>Il file %1 appena scaricato non risulta disponibile.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="668"/>
        <source>It seems that LoTW has no QSO with the Station Callsign you are using (%1).</source>
        <translation>Su LoTW non risulta nessun QSO con il nominativo in uso (%1).</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="674"/>
        <source>Try again and send the downloaded file (%1) to the KLog developer for analysis.</source>
        <translation>Riprova e invia il file scaricato (%1) agli sviluppatori di KLog per analisi.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="690"/>
        <source>KLog downloaded %1 QSOs successfully. Do you want to update your log with the downloaded data?</source>
        <translation>KLog QSO correttamente scaricati %1. Vuoi inserire nel tuo log i nuovi QSO appena scaricati?</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="63"/>
        <source>Double click on the date that you want to use as the start date for downloading QSOs.</source>
        <translation>Doppio click sulla data che vuoi usare come prima data nello scarico dei QSO.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="188"/>
        <source>KLog - LoTW Station callsign</source>
        <translation>KLog - Nominativo di stazione LoTW</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="189"/>
        <source>There is not a single QSO in the log with that station callsign.</source>
        <translation>Non c&apos;è un solo QSO sul log con questo nominativo di stazione.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="190"/>
        <source>Are you sure that you want to use that station callsign (%1)?</source>
        <translation>Sei sicuro di voler usare questo nominativo di stazione (%1)?</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="252"/>
        <location filename="../lotwutilities.cpp" line="379"/>
        <source>KLog - LoTW File already exists</source>
        <translation>KLog - File LoTW già presente</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="279"/>
        <location filename="../lotwutilities.cpp" line="406"/>
        <source>KLog - LoTW Can&apos;t write the file</source>
        <translation>KLog . LoTW non riesce a scrivere il file</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="281"/>
        <location filename="../lotwutilities.cpp" line="408"/>
        <source>The file %1 already exists.</source>
        <translation>Il file %1 è già presente.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="334"/>
        <source>KLog - LoTW Start date selection</source>
        <translation>KLog - Selezione data iniziale LoTW</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="508"/>
        <source>KLog - LoTW Download error</source>
        <translation>KLog - Errore durante lo scaricamento LoTW</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="510"/>
        <source>There was an error (%1) while downloading the file from LoTW.</source>
        <translation>Si è verificato un errore (%1) durante lo scarico del file da LoTW.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="511"/>
        <source>The downloading error details are: %1</source>
        <translation>I dettagli dell&apos;errore durante lo scarico sono: %1</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="523"/>
        <source>KLog - LoTW Redirection found</source>
        <translation>KLog - Rilevata redirezione LoTW</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="599"/>
        <source>KLog - LoTW File not found</source>
        <translation>KLog - File LoTW non trovato</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="600"/>
        <source>KLog can&apos;t find the downloaded file.</source>
        <translation>KLog non trova il file scaricato.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="660"/>
        <source>KLog - LoTW user/password error</source>
        <translation>KLog - Username / password LoTW rifiutate</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="661"/>
        <source>LoTW server did not recognized your user/password</source>
        <translation>Il server LoTW non riconosce l&apos;username/password inserito</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="662"/>
        <source>Check your user and password and ensure your are using the right one before trying again.</source>
        <translation>Verifica che l&apos;username/passowrd inseriti siano quelli giusti prima di riprovare ancora.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="666"/>
        <source>KLog - LoTW No QSOs </source>
        <translation>KLog - LoTW numero QSO </translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="667"/>
        <source>LoTW sent no QSOs</source>
        <translation>LoTW invio numero di QSO</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="672"/>
        <source>KLog - LoTW Unknown error</source>
        <translation>KLog - LoTW Errore imprevisto</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="673"/>
        <source>KLog can&apos;t recognize the file that has been downloaded from LoTW.</source>
        <translation>KLog non può verificare se il file è stato correttamente scaricato da LoTW.</translation>
    </message>
    <message>
        <location filename="../lotwutilities.cpp" line="691"/>
        <source>Now KLog will process the downloaded QSO and update your local log.</source>
        <translation>KLog inserirà i QSO appena scaricati sul tuo log locale.</translation>
    </message>
</context>
<context>
    <name>LogWindow</name>
    <message>
        <location filename="../logwindow.cpp" line="222"/>
        <source>There was a problem with the log, please restart KLog and contact the development team if the error persist.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="327"/>
        <source>QSL Send</source>
        <translation>Trasmetti QSL</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="336"/>
        <source>QSL Rcvd</source>
        <translation>Ricevi QSL</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="388"/>
        <source>&amp;Delete</source>
        <translation>&amp;Cancella</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="390"/>
        <source>Delete a QSO</source>
        <translation>Cancella un QSO</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="393"/>
        <source>&amp;Edit QSO</source>
        <translation>&amp;Modifica QSO</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="395"/>
        <source>Edit this QSO</source>
        <translation>Modifica questo QSO</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="398"/>
        <source>Via &amp;bureau</source>
        <translation>Via &amp;bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="400"/>
        <source>Send this QSL via bureau</source>
        <translation>Trasmetti questa QSL via bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="403"/>
        <source>D&amp;irect</source>
        <translation>D&amp;irect</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="405"/>
        <source>Send this QSL via direct</source>
        <translation>Trasmetti questa QSL via direct</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="408"/>
        <location filename="../logwindow.cpp" line="454"/>
        <location filename="../logwindow.cpp" line="462"/>
        <source>Via bureau</source>
        <translation>Via bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="410"/>
        <source>QSL &amp;received via bureau</source>
        <translation>QSL &amp;ricevuta via bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="413"/>
        <location filename="../logwindow.cpp" line="458"/>
        <location filename="../logwindow.cpp" line="466"/>
        <source>Direct</source>
        <translation>Direct</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="415"/>
        <source>QSL received via direc&amp;t</source>
        <translation>QSL ricevuta via direc&amp;t</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="418"/>
        <source>Check in QRZ.com</source>
        <translation>Controlla su QRZ.com</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="420"/>
        <source>Check this callsign in QRZ.com</source>
        <translation>Controlla questo nominativo su QRZ.com</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="423"/>
        <source>Check in DXHeat.com</source>
        <translation>Controlla su DXHeat.com</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="425"/>
        <source>Check this callsign in DXHeat.com</source>
        <translation>Controlla questo nominativo su DXHeat.com</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="428"/>
        <source>Delete selected QSOs</source>
        <translation>Cancella i QSO selezionati</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="430"/>
        <source>Delete the selected QSOs</source>
        <translation>Cancella i QSO selezionati</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="433"/>
        <source>Export to ADIF</source>
        <translation>Esporta su ADIF</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="434"/>
        <source>Export the selected QSOs to an ADIF file.</source>
        <translation>Esporta i QSO selezionati su un file ADIF.</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="442"/>
        <source>Upload to LoTW</source>
        <translation>Trasferisce a LoTW</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="443"/>
        <source>Upload the selected QSOs to LoTW</source>
        <translation>Scarica i QSO selezionati su LoTW</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="446"/>
        <source>Upload to ClubLog</source>
        <translation>Trasferisce a ClubLog</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="447"/>
        <source>Upload the selected QSOs to ClubLog</source>
        <translation>Trasferisce i QSO selezionati su ClubLog</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="450"/>
        <source>Upload to eQSL.cc</source>
        <translation>Trasferisce su eSQL.cc</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="451"/>
        <source>Upload the selected QSOs to eQSL.cc</source>
        <translation>Trasferisce i QSO selezionati su eQSO.cc</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="455"/>
        <source>Send these QSLs via bureau</source>
        <translation>Trasferisce questi QSO via bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="459"/>
        <source>Send these QSLs via direct</source>
        <translation>Trasferisce questi QSO via direct</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="463"/>
        <source>QSLs received via bureau</source>
        <translation>QSL ricevute via bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="467"/>
        <source>QSLs received via direc&amp;t</source>
        <translation>QSL ricevute via direc&amp;t</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="470"/>
        <source>Select none</source>
        <translation>Nessuna scelta</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="471"/>
        <source>Remove all selections</source>
        <translation>Cancella tutte le scelte</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="474"/>
        <source>Select all</source>
        <translation>Scegli Tutto</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="475"/>
        <source>Select all the QSOs</source>
        <translation>Scegli tutti i QSO</translation>
    </message>
</context>
<context>
    <name>MainQSOEntryWidget</name>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="48"/>
        <location filename="../mainqsoentrywidget.cpp" line="940"/>
        <source>&amp;Add</source>
        <translation>&amp;Aggiunge</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="49"/>
        <location filename="../mainqsoentrywidget.cpp" line="941"/>
        <source>&amp;Clear</source>
        <translation>&amp;Pulisce</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="84"/>
        <source>Callsign of the QSO.</source>
        <translation>Nominativo del QSO.</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="85"/>
        <source>Band of the QSO.</source>
        <translation>Banda del QSO.</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="86"/>
        <source>Mode of the QSO.</source>
        <translation>Modo operativo del QSO.</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="87"/>
        <source>Date of the QSO.</source>
        <translation>Data del QSO.</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="88"/>
        <source>Time of the QSO.</source>
        <translation>Ora del QSO.</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="89"/>
        <source>Add the QSO to the log.</source>
        <translation>Aggiunge il QSO al log.</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="90"/>
        <source>Clears the QSO entry.</source>
        <translation>Pulisce i campi del QSO.</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="91"/>
        <source>Look up info about the current callsign on qrz.com</source>
        <translation>Cerca informazioni sul corrente nominativo su qrz.com</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="92"/>
        <source>KLog will show real time if enabled.</source>
        <translation>KLog lavorerà in tempo reale se abilitato.</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="93"/>
        <source>Real time</source>
        <translation>Tempo-reale</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="95"/>
        <source>Stop wsjt-x and hamlib from automatically updating QSO information.</source>
        <translation>Arresta wsjt e hamlib perl&apos;aggiornamento automatico dei dati sui QSO.</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="96"/>
        <source>Manual Mode</source>
        <translation>Modalità manuale</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="114"/>
        <location filename="../mainqsoentrywidget.cpp" line="1129"/>
        <source>Callsign</source>
        <translation>Nominativo</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="934"/>
        <source>&amp;Save</source>
        <translation>&amp;Salva</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="935"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Annulla</translation>
    </message>
    <message>
        <location filename="../mainqsoentrywidget.cpp" line="1135"/>
        <source>DUPE</source>
        <comment>Translator: DUPE is a common world for hams. Do not translate of not sure</comment>
        <translation>DUPE</translation>
    </message>
</context>
<context>
    <name>MainWindow</name>
    <message>
        <location filename="../mainwindow.cpp" line="127"/>
        <source>Starting KLog</source>
        <translation>KLog in avvio</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="105"/>
        <location filename="../mainwindow.cpp" line="162"/>
        <source>DX Entity</source>
        <translation>Collegamento DX</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="163"/>
        <source>&amp;Log Window</source>
        <translation>Finestra &amp;Log</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="887"/>
        <location filename="../mainwindow.cpp" line="3268"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <source>It seems that you have never done a backup or exported your log to ADIF.</source>
        <translation type="vanished">Non hai mai fatto un backup o esportato il tuo log su file ADIF.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="382"/>
        <source>It was not possible to open the debug file for writing. No debug log will be saved!</source>
        <translation>Impossobile aprire in scrittura il file di debug. Log di debug non salvato!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="104"/>
        <source>Status bar ...</source>
        <translation>Barra di stato ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="521"/>
        <source>KLog - CTY.dat update</source>
        <translation>KLog - Aggiornamento CTY.dat</translation>
    </message>
    <message>
        <source>It seems that the latest backup you did is older than one month.</source>
        <translation type="vanished">Il tuo ultimo backup risale a più di 1 mese fa.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="756"/>
        <source>Log backup recommended!</source>
        <translation>Backup del log raccomandato!</translation>
    </message>
    <message>
        <source>It is a good practice to backup your full log regularly to avoid loosing data in case of a problem.
Once you export your log to an ADIF file, you should copy that file to a safe place, like an USB drive, cloud drive, another computer, ...

KLog will remind you to backup on a monthly basis.

</source>
        <translation type="vanished">E&apos; buona abitudine fare regolarmente backup completo del tuo log per evitare di perderli in caso di problemi.
Una volta esportato il tuo log su file ADIF, dovresti copiare il file su un supporto esterno e tenuto questo al sicuro, come una pennina USB, cloud drive, un altro computer, ...

KLog ti ricoderà la necessità di fare il backup almeno 1 volta al mese.

</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="773"/>
        <source>KLog - Backup</source>
        <translation>klOG - Backup</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="804"/>
        <location filename="../mainwindow.cpp" line="812"/>
        <source>KLog - New version detected!</source>
        <translation>KLog . Rilevata nuova versione!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="824"/>
        <source>Ready</source>
        <translation>Pronto</translation>
    </message>
    <message>
        <source>An unexpected error ocurred when trying to add the QSO to your log. If the problem persists, please contact the developer for analysis: </source>
        <translation type="vanished">Errore imprevisto durante l&apos;aggiunta del QSO al tuo log. Se il problema si ripete, per favore contatta lo staff di sviluppo per analisi: </translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1155"/>
        <source>KLog - Not valid call</source>
        <translation>KLog - Collegamento non valido</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1158"/>
        <source>Adding non-valid calls to the log may create problems when applying for awards, exporting ADIF files to other systems or applications.</source>
        <translation>Caricare chiamate non valide nel log può dare problemi, quando trasmesse per riconoscimenti, se exportate su file ADIF verso altri sistemi o applicazioni.</translation>
    </message>
    <message>
        <source>You have selected an entity:</source>
        <translation type="vanished">Hai scelto un elemento:</translation>
    </message>
    <message>
        <source>that is different from the KLog proposed entity:</source>
        <translation type="vanished">diverso dall&apos;elemento KLog proposto:</translation>
    </message>
    <message>
        <source>Click on the prefix of the correct entity or Cancel to edit the QSO again.</source>
        <translation type="vanished">Clicca sul prefisso dell&apos;elemento corretto o Annulla per tornare a correggere il QSO.</translation>
    </message>
    <message>
        <source>No DXCC</source>
        <translation type="vanished">No DXCC</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="vanished">Vuoto</translation>
    </message>
    <message>
        <source>Click on the prefix of the right entity or Cancel to correct.</source>
        <translation type="vanished">Clicca sul prefisso dell&apos;elelemento a destra o su Cancella per correggere.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1510"/>
        <source>KLog - ClubLog error</source>
        <translation>KLog - errore ClubLog</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1627"/>
        <source>KLog - eQSL error</source>
        <translation>KLog - errore eQL</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2476"/>
        <source>Download from LoTW ...</source>
        <translation>Scarico da LoTW ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2481"/>
        <source>Download the full log from LoTW ...</source>
        <translation>Scarico del log completo da LoTW ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2486"/>
        <source>ClubLog tools ...</source>
        <translation>Strumenti ClubLog ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2493"/>
        <source>Upload the queued QSOs to ClubLog ...</source>
        <translation>Trasferimento QSO in coda a ClubLog ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2499"/>
        <source>eQSL tools ...</source>
        <translation>Strumenti eQSL ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2506"/>
        <source>Upload the queued QSOs to eQSL.cc ...</source>
        <translation>Trasferimento QSO in coda a eQSL.cc ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2512"/>
        <source>QRZ.com tools ...</source>
        <translation>Strumenti QRZ.com ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2736"/>
        <source>Your log has been updated with the LoTW downloaded QSOs.</source>
        <translation>Il tuo log è stato aggiornato aggiungendo i QSO scaricati da LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2737"/>
        <source>KLog has updated %1 QSOs from LoTW.</source>
        <translation>KLog ha aggiornato i QSO %1 da LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3830"/>
        <source>No QSOs have been exported to ADIF.</source>
        <translation>Nessun QSO è stato esportato su ADIF.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3834"/>
        <source>KLog has exported %1 QSOs to the ADIF file: %2</source>
        <translation>KLog ha esportato N. %1 QSO su file ADIF: %2</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3900"/>
        <source>You need to select one station callsign to be able to send your log to LoTW.</source>
        <translation>Devi scegliere un nominativo di stazione per trasmettere il tuo log a LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3940"/>
        <source>There was an error while updating to Yes the LoTW QSL sent information.</source>
        <translation>Si è verificato un errore mentre marcavo come Spediti Sì verso LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4122"/>
        <location filename="../mainwindow.cpp" line="4165"/>
        <source>KLog - Select the Station Callsign.</source>
        <translation>KLog - Scegli il nominativo di stazione.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4828"/>
        <source>RSTrx</source>
        <translation>RSTrx</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4826"/>
        <source>RSTtx</source>
        <translation>RSTtx</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1953"/>
        <source>Do you really want to exit KLog?</source>
        <translation>Vuoi davvero uscire da KLog?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="381"/>
        <source>KLog - File not open</source>
        <translation>KLog - File non aperto</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="406"/>
        <source>It was not possible to define the KLog folder. Some functions may not work properly!</source>
        <translation>Non riesco a impostare la cartellla di KLog. Alcune funzioni potranno lavorare improrpiamente!</translation>
    </message>
    <message>
        <source>KLog - Unexpected error</source>
        <translation type="vanished">KLog - Errore imprevisto</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1217"/>
        <source>KLog - Select correct entity</source>
        <translation>KLog - Scegli il giusto elemento</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1952"/>
        <source>KLog - Exit</source>
        <translation>KLog - Uscita</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2345"/>
        <source>&amp;File</source>
        <translation>&amp;File</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2359"/>
        <source>Import an ADIF file into the current log.</source>
        <translation>Importa un file ADIF nell&apos;attuale log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2373"/>
        <source>Export the current log to an ADIF logfile.</source>
        <translation>Esporta l&apos;attuale log su un log file ADIF.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2379"/>
        <source>Export ALL the QSOs into one ADIF file, merging QSOs from all the logs.</source>
        <translation>Esporta TUTTI i QSO in un file ADIF, fondendo QSO da tutti i diversi log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2386"/>
        <source>Print your log.</source>
        <translation>Stampa il tuo log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2391"/>
        <source>KLog folder</source>
        <translation>Cartella di KLog</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2393"/>
        <source>Opens the data folder of KLog.</source>
        <translation>Apre la cartella dati di KLog.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2405"/>
        <source>E&amp;xit</source>
        <translation>E&amp;sce</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2412"/>
        <source>&amp;Tools</source>
        <translation>&amp;Strumenti</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2414"/>
        <source>Fill in QSO data</source>
        <translation>Inserisci i dati del QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2418"/>
        <source>Go through the log reusing previous QSOs to fill missing information in other QSOs.</source>
        <translation>Riempie i dati mancanti su QSO con dati presi da precedenti QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2426"/>
        <source>Shows QSOs for which you should send your QSL and request the DX QSL.</source>
        <translation>Elenca i QSO per i quali devi ancora spedire la tua QSL e richiedere la QSL del DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2428"/>
        <source>Find My-QSLs pending to send</source>
        <translation>Trova le mie QSL ancora da spedire</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2432"/>
        <source>Shows the QSOs with pending requests to send QSLs. You should keep this queue empty!</source>
        <translation>Evidenzia i QSO per i quali hai ancora da spedire le QSL. Questa lista dovrebbe essere sempre vuota!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2462"/>
        <source>Mark all queued QSOs in this log as sent to LoTW.</source>
        <translation>Indica come spediti a LoTW tutti i QSO in coda di questo log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2467"/>
        <source>Mark all queued QSOs as sent to LoTW.</source>
        <translation>Indica come spediti a LoTW tutti i QSO in coda.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2543"/>
        <location filename="../mainwindow.cpp" line="2548"/>
        <source>For updated DX-Entity data, update cty.csv.</source>
        <translation>Per aggiornare i collegamenti DX, aggiorna cty.csv.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2552"/>
        <source>Stats</source>
        <translation>Statistiche</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2555"/>
        <location filename="../mainwindow.cpp" line="2560"/>
        <source>Show the statistics of your radio activity.</source>
        <translation>Mostra le statistiche sulla tua attività radio.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2588"/>
        <source>&amp;Help</source>
        <translation>&amp;Aiuto</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2802"/>
        <source>KLog - TQSL</source>
        <translation>KLog - TQSL</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2806"/>
        <source>TQSL is not installed or KLog can&apos;t find it. Please check the configuration.</source>
        <translation>TQSL non installato o irraggiungibile per KLog. Per favore ricontrolla la configurazione.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2825"/>
        <source>Error #1: The process was cancelled by the user or TQSL was not configured. No QSOs were uploaded.</source>
        <translation>Errore #1: Procedura annullata dall&apos;utente o TQSL non configurato. Nessun QSOs è stato trasferito.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2829"/>
        <source>Error #2: Upload was rejected by LoTW, please check your data.</source>
        <translation>Errore #2: Il trasferimento è stato rifiutato da LoTW, per favore ricontrolla i tuoi dati.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2833"/>
        <source>Error #3: The TQSL server returned an unexpected response.</source>
        <translation>Errore #3: Il server TQSL ha risposto in modo inaspettato.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2837"/>
        <source>Error #4: There was a TQSL error.</source>
        <translation>Errore #4: Si è verificato un errore su TQSL.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2841"/>
        <source>Error #5: There was a TQSLLib error.</source>
        <translation>Errore #5: Si è verificato un errore con TQSLLib.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2845"/>
        <source>Error #6: It was not possible to open the input file.</source>
        <translation>Errore #6: Impossibile aprire in input il file.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2849"/>
        <source>Error #7: It was not possible to open the ouput file.</source>
        <translation>Errore #7: Impossobile aprire in output il file.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2853"/>
        <source>Error #8: No QSOs were processed since some QSOs were duplicates or out of date range.</source>
        <translation>Errore #8: Nessun QSO è stato processato perché alcuni QSO sono duplicati o hanno data al di fuori del limite ammesso.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2857"/>
        <source>Error #9: Some QSOs were processed, and some QSOs were ignored because they were duplicates or out of date range.</source>
        <translation>Errore #9: Alcuni QSO sono stati processati, ed altri sono stati ignorati perché duplicati o con data al di fuori dei limiti ammessi.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2861"/>
        <source>Error #10: Command syntax error. KLog sent a bad syntax command.</source>
        <translation>Errore #10: Errore di sintassi sul comando. KLog ha inviato un comando con sintassi sbagliata.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2865"/>
        <source>Error #11: LoTW Connection error (no network or LoTW is unreachable).</source>
        <translation>Errore #11: Impossibile connettersi a LoTW (rete assente o server LoTw irraggiungibile).</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2868"/>
        <source>Error #00: Unexpected error. Please contact the development team.</source>
        <translation>Errore #00: Errore inaspettato. Per favore contatta lo staff di sviluppo.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2900"/>
        <source>The log that you have selected contains more than just one station callsign.</source>
        <translation>Il log selezionato contiene più di un solo nominativo di stazione.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2900"/>
        <source>Please select the station callsign you want to mark as sent to LoTW:</source>
        <translation>Per favore scegli il nominativo di stazione che vuoi segnare come già inviato a LoTW:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2903"/>
        <source>Station Callsign:</source>
        <translation>Nominativo di stazione:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2915"/>
        <source>Define Station Callsign</source>
        <translation>Imposta il nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2916"/>
        <source>Enter the station callsign to use for this log or leave it empty for QSO without station callsign defined:</source>
        <translation>Scegli il nominativo di stazione per questo log o lascialo vuoto per i QSO senza nominativo impostato:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2931"/>
        <source>KLog - No station selected</source>
        <translation>KLog - Stazione non selezionata</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2932"/>
        <source>No station callsign has been selected and therefore no log will be marked</source>
        <translation>Nessun nominativo di stazione scelto e qundi nessun log sarà segnato</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3102"/>
        <source>Congratulations!</source>
        <translation>congratulazioni!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3102"/>
        <source>You already have the latest version.</source>
        <translation>Versione già aggiornata.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3266"/>
        <source>You can find the KLog data folder here: </source>
        <translation>La cartella dati di KLog è questa: </translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3320"/>
        <source>start</source>
        <translation>inizio</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3347"/>
        <source>stop</source>
        <translation>stop</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5422"/>
        <source>KLog - QSO received - NEW</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5428"/>
        <source>&lt;HTML&gt;&lt;body&gt;ASK-The following QSO data has been received from to be logged:

&lt;table&gt;&lt;tr&gt;&lt;TH&gt;Callsign:&lt;/TH&gt;&lt;TD&gt;%1&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;Freq:&lt;/TH&gt;&lt;TD&gt;%2&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;Mode:&lt;/TH&gt;&lt;TD&gt;%3&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;Time On:&lt;/TH&gt;&lt;TD&gt;%4&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;Time Off:&lt;/TH&gt;&lt;TD&gt;%5&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;RST TX:&lt;/TH&gt;&lt;TD&gt;%6&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;RST RX:&lt;/TH&gt;&lt;TD&gt;%7&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;Comment:&lt;/TH&gt;&lt;TD&gt;%8&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;DX-Grid:&lt;/TH&gt;&lt;TD&gt;%9&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;Local-Grid:&lt;/TH&gt;&lt;TD&gt;%10&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;Station Callsign:&lt;/TH&gt;&lt;TD&gt;%11&lt;/TD&gt;&lt;/TR&gt;&lt;TR&gt;&lt;TH&gt;Operator Callsign:&lt;/TH&gt;&lt;TD&gt;%12&lt;/TD&gt;&lt;/TR&gt;&lt;/table&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5665"/>
        <source>KLog - QSO Dupe</source>
        <translation>KLog - QSO Duplicati</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5666"/>
        <source>A dupe QSO has been detected in the file and will not be added to the log.</source>
        <translation>QSO duplicato  rilevato nel file non sarà aggiunto al log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5667"/>
        <source>Please check the QSO information file and ensure it is properly added.</source>
        <translation>Per favore controlla il file informazioni QSO e accertati che sia correttamente aggiunto.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6321"/>
        <source>If you are sure that the database contains QSOs and KLog is not able to find them, please contact the developers (see About KLog) for help.</source>
        <translation>Se sei davvero certo che il database contenga dei QSO anche se KLog non riesce a trovarne, per favore contatta gli sviluppatori (guarda About KLog) per aiuto.</translation>
    </message>
    <message>
        <source>KLog - QSO received</source>
        <translation type="vanished">Klog - QSO ricevuto</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5477"/>
        <source>Duplicated QSOs have to match another existing QSO with the same call, band, mode, date and time, taking into account the period that can be defined in the settings.</source>
        <translation>I QSO duplicati hanno corrispondenza di nominativo, banda, modo, data ed ora con un QSO già esistente, relativamente al periodo definito nell&apos;impostazione dell&apos;account.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5404"/>
        <source>QSO logged from WSJT-X:</source>
        <translation>QSO loggato da  WSJT-X:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="813"/>
        <source>It seems that you are running this version of KLog for the first time.</source>
        <translation>E&apos; la prima esecuzione di questa versione di KLog.</translation>
    </message>
    <message>
        <source>The setup will be open to allow you to do any new setup you may need.</source>
        <translation type="vanished">Adesso apro immediatamente la maschera di configurazione per permetterti tutte le modifiche richieste.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1415"/>
        <source>You have requested to delete the QSO with: %1</source>
        <translation>Hai chiesto di cancellare il QSO con: %1</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1365"/>
        <location filename="../mainwindow.cpp" line="1420"/>
        <source>Are you sure?</source>
        <translation>Sei sicuro?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2522"/>
        <source>Check always the current callsign in QRZ.com</source>
        <translation>Controlla sempre il nominativo su QRZ.com</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="523"/>
        <source>You can update the entities database in Tools-&gt;Update cty.csv</source>
        <translation>Puoi aggiornare l&apos;elenco delle località su Strumenti-&gt;Scarirco cty.cvs</translation>
    </message>
    <message>
        <source>Do you want to do it now?</source>
        <translation type="vanished">Vuoi farlo adesso?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1156"/>
        <source>The callsign %1 is not a valid call. Do you really want to add this callsign to the log?</source>
        <translation>Il nominativo %1 non è un nominativo valido.  Davvero vuoi aggiungerlo al log?</translation>
    </message>
    <message>
        <source>KLog - Not valid callsign</source>
        <translation type="vanished">KLog - Nominativo non valido</translation>
    </message>
    <message>
        <source>The callsign %1 is not a valid callsign. Do you really want to add this callsign to the log?</source>
        <translation type="vanished">Il nominativo %1 non è un nomiantivo valido. Favvero vuoi aggiungerlo al log?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1360"/>
        <source>You have requested to delete several QSOs </source>
        <translation>Hai chiesto la cancellazione di parecchi QSO </translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1511"/>
        <source>The ClubLog upload process has finished with an error and the log was possibly not uploaded.</source>
        <translation>L&apos;perazione di scarico di ClubLog è terminata con errori e probabilmente il log non è stato scaricato.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1512"/>
        <source>Please check your credentials, your Internet connection and your Clublog account. The received error code was: %1</source>
        <translation>Per favore controlla i tuoid ati di collegamento, della tua connessione e dell&apos;account ClubLog. Il codice di errore riportato era: %1</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1531"/>
        <source>Do you want to mark as Uploaded all the QSOs uploaded to ClubLog?</source>
        <translation>Vuoi segnare come trasferiti tutti i QSO trasferiti a ClubLog?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1530"/>
        <location filename="../mainwindow.cpp" line="1545"/>
        <location filename="../mainwindow.cpp" line="1556"/>
        <location filename="../mainwindow.cpp" line="1566"/>
        <location filename="../mainwindow.cpp" line="1576"/>
        <location filename="../mainwindow.cpp" line="3984"/>
        <location filename="../mainwindow.cpp" line="4000"/>
        <location filename="../mainwindow.cpp" line="4009"/>
        <location filename="../mainwindow.cpp" line="4045"/>
        <location filename="../mainwindow.cpp" line="4202"/>
        <source>KLog - ClubLog</source>
        <translation>KLog - ClubLog</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="73"/>
        <source>Always check the current callsign in QRZ.com</source>
        <translation>Controlla sempre il corrente nominativo su QRZ.com</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="187"/>
        <source>Upload queued QSOs to LoTW</source>
        <translation>Trasferisce QSO in coda verso LoTW</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="524"/>
        <source>Do you want to update now?</source>
        <translation>Vuoi aggiorare adesso?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="739"/>
        <source>You seem to have never backed up or exported your log to ADIF.</source>
        <translation>Mi sembra che tu non abbia mai backuppato o esportato il tuo log su ADIF.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="745"/>
        <source>Your latest backup seems older than one month.</source>
        <translation>Il tuo backup più recente è più vecchio di un mese.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="759"/>
        <source>Regular backups prevent data loss and are good operator practice.
Once exported, copy your ADIF file to a safe place such as a USB drive, cloud drive or other offsite computer.

KLog will remind you to backup on a monthly basis.

</source>
        <translation>Backup regolari prevengono perdite di dati e costituiscono una buoan pratica operativa.
Appena esportato, copia  il tuo ADIF file in un luogo sicuro come una pdrive USB, drive cloud o altri computer fuori linea.

KLog ti riconderà di fare il backup mensilmente.

</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="777"/>
        <source>Backup completed successfully</source>
        <translation>Backup completato con successo</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="778"/>
        <source>KLog will remind you again in approximately one month.</source>
        <translation>Klog ti ricorderà di nuovo approssimativamente in un mese.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="783"/>
        <source>Backup failed.</source>
        <translation>Backup fallito.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="784"/>
        <source>Periodic data backups are recommended to prevent data loss and corruption of your log.</source>
        <translation>Backup periodici dei dati sono racocmandati per prevenire perdite di dati e danneggiamento del log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="814"/>
        <source>The setup will now open to allow you to change your settings.</source>
        <translation>Il pannello impostazioni si aprirà per permetterti di cambiare le tue impostazioni.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1547"/>
        <source>There was an error while updating to Yes the ClubLog QSO upload information.</source>
        <translation>Si è verificato un errore durante l&apos;aggiornamento a Sì delle informazioni QSO ClubLog.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1557"/>
        <source>The ClubLog upload process has finished and KLog created a file (%1) in your KLog folder.

Do you want KLog to remove that file?</source>
        <translation>Il trasferimento è terminato e KLog ha creato un file (%1) nella cartella di KLog.

Vuoi cancellare questo file?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1577"/>
        <location filename="../mainwindow.cpp" line="1695"/>
        <source>The file has not been removed.</source>
        <translation>Il file non è stato cancellato.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1578"/>
        <location filename="../mainwindow.cpp" line="1696"/>
        <source>It seems that there was something that prevented KLog from removing the file
You can remove it manually.</source>
        <translation>Qualcosa ha impedito a Klog di cancellare il file
Ma lo puoi comunque cancellare manualmente.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1628"/>
        <source>The eQSL upload process has finished with an error and the log was possibly not uploaded.</source>
        <translation>Il trasferimento eQSL è terminato ma con errori e qundi probabilmente non ha avuto termine.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1629"/>
        <location filename="../mainwindow.cpp" line="1747"/>
        <source>Please check your credentials, your Internet connection and your eQSL account. The received error code was: %1</source>
        <translation>Per favore controlla i tuoi dati account, la tuaa conenssione internet e le tue credenziali eQSL. Il codice di errore riportato era: %1</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1648"/>
        <source>Do you want to mark as Uploaded all the QSOs uploaded to eQSL?</source>
        <translation>Vuoi marcare come trasferiti tutti i QSL mandati a eQSL?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1664"/>
        <source>There was an error while updating to Yes the eQSL QSO upload information.</source>
        <translation>Si è verificato un errore durante l&apos;aggiornamento a Sì di eQSL delle informaizoni dei QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1675"/>
        <source>The eQSL upload process has finished and KLog created a file (%1) in your KLog folder.

Do you want KLog to remove that file?</source>
        <translation>Il trasferimento a eQSL è terminato e KLog a creato un file (%1) nella tua carrtella KLog.

Vuoi cancellare quresto file?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1903"/>
        <source>KLog - %1</source>
        <translation>KLog %1</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2265"/>
        <source>The logfile has been modified.</source>
        <translation>Il file di log è stato modificato.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2265"/>
        <source>Do you want to save your changes?</source>
        <translation>Vuoi salvare i cambiamenti?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2284"/>
        <location filename="../mainwindow.cpp" line="3827"/>
        <source>KLog - ADIF export</source>
        <translation>KLog - exsporta ADIF</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2356"/>
        <source>&amp;Import from ADIF ...</source>
        <translation>&amp;Importazione da Adif ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2369"/>
        <source>Export to ADIF ...</source>
        <translation>Esportazione su ADIF ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2375"/>
        <source>Export all logs to ADIF ...</source>
        <translation>Esporta tutti i log su ADIF ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2383"/>
        <source>&amp;Print Log ...</source>
        <translation>&amp;Stampa Log ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2421"/>
        <source>QSL tools ...</source>
        <translation>Strumenti QSL ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2423"/>
        <source>Find QSO to QSL</source>
        <translation>Cerca QSO sulle QSL</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2434"/>
        <source>Find DX-QSLs pending to receive</source>
        <translation>Cera le QSL su DX in attesa di ricezione</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2437"/>
        <source>Shows DX-QSLs for which requests or QSLs have been sent with no answer.</source>
        <translation>Elenca QSL di DX per le quali richieste o QSL spedite sono ancora senza risposta.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2439"/>
        <source>Find requested pending to receive</source>
        <translation>Cerca richieste in attesa di ricezione</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2442"/>
        <source>Shows the DX-QSLs that have been requested.</source>
        <translation>Elenca le QSL DX richieste.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2445"/>
        <source>LoTW tools ...</source>
        <translation>Strumenti LoTW ...</translation>
    </message>
    <message>
        <source>Queue all QSLs from this log to be sent</source>
        <translation type="vanished">Mette in coda tutte le QSL di questo log ancora da spedire</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2450"/>
        <source>Mark all non-sent QSOs in this log as queued to be uploaded.</source>
        <translation>Segna tutti i QSO non speditI di questo log mettendolI in coda in attesa per l&apos;invio.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2452"/>
        <source>Queue all QSLs to be sent</source>
        <translation>Mette in coda tutte le QSL da spedire</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2455"/>
        <source>Put all the non-sent QSOs in the queue to be uploaded.</source>
        <translation>Mette incoda tutti i QSO per essere inviati.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2459"/>
        <source>Mark all queued QSOs from this log as sent</source>
        <translation>Marca tutti i QSO In coda sul log come trasmessi</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2464"/>
        <source>Mark all queued QSOs as sent</source>
        <translation>Marca tutti i QSO in coda come spediti</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2514"/>
        <source>Check the current callsign in QRZ.com</source>
        <translation>Verifica il nominativo corrente su QRZ.com</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2516"/>
        <source>Upload the queued QSOs to QRZ.com ...</source>
        <translation>Trasferisce i QSO In coda su QRZ.com ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2539"/>
        <source>Update cty.csv</source>
        <translation>Aggiorna cty.csv</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2545"/>
        <source>Update Satellite Data</source>
        <translation>Agggiorna dati satelliti</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2591"/>
        <source>Online manual (F1) ...</source>
        <translation>Manuale online (F1) ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2596"/>
        <source>&amp;Tips ...</source>
        <translation>&amp;Suggerimenti ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2602"/>
        <source>&amp;Debug ...</source>
        <translation>&amp;Debug ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2607"/>
        <source>&amp;About ...</source>
        <translation>&amp;About ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2614"/>
        <source>About Qt ...</source>
        <translation>About Qt ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2622"/>
        <source>Check updates ...</source>
        <translation>Controlla presenza aggiornamenti ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2699"/>
        <source>All pending QSOs of this log has been marked as queued for LoTW!</source>
        <translation>Tutti i QSO di questo log in attesa sono inseriti in coda per LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2699"/>
        <location filename="../mainwindow.cpp" line="2777"/>
        <source>Now you can upload them to LoTW.</source>
        <translation>Adesso puoi trasmetterlo a LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2705"/>
        <source>There was a problem to mark all pending QSOs of this log as queued for LoTW!</source>
        <translation>Impossibile marcare tutti i QSO di questo log in coda per LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2747"/>
        <source>Your log has not been updated.</source>
        <translation>Il tuo log non è stato aggiornato.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2748"/>
        <source>No QSO was updated with the data coming from LoTW. This may be because of errors in the logfile or simply because your log was already updated.</source>
        <translation>Nessun QSO è stato aggiornato con i dati provenienti da LoTW. Forse a causa di erroi contenuti nel file log o magari semplicemente perché il tuo log era già aggiornato.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2777"/>
        <source>All pending QSOs has been marked as queued for LoTW!</source>
        <translation>Tutti i QSO in attesa sono stati marcati per LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2987"/>
        <source>All queued QSOs has been marked as sent to LoTW!</source>
        <translation>Tutti i QSO in coda sono stati marcati come spediti a LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2967"/>
        <source>There was a problem to mark all queued QSOs of this log as sent to LoTW!</source>
        <translation>Impossibile marcare tutti i QSO di questo log in coda come spediti a LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3045"/>
        <source>About ...</source>
        <translation>About ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3101"/>
        <source>KLog - Update checking result</source>
        <translation>KLog . risultato controllo aggiornamento</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3321"/>
        <location filename="../mainwindow.cpp" line="3348"/>
        <source>UDP Server error
The UDP server failed to %1.</source>
        <comment>start or stop</comment>
        <translation>Errore Server UDP
Il server UDP ha fallito a %1.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6321"/>
        <source>It seems that there are no QSOs in the database.</source>
        <translation>Sembra non ci siano QSO nel database.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3712"/>
        <source>Status of the DX entity.</source>
        <translation>Stato del collegamento DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3714"/>
        <source>Name of the DX entity.</source>
        <translation>Nome del collegamento DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3732"/>
        <source>QSO</source>
        <translation>QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3733"/>
        <source>QSL</source>
        <translation>QSL</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3734"/>
        <location filename="../mainwindow.cpp" line="4233"/>
        <source>eQSL</source>
        <translation>eQSL</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3735"/>
        <location filename="../mainwindow.cpp" line="4834"/>
        <source>Comment</source>
        <translation>Commento</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3737"/>
        <source>Others</source>
        <translation>Altro</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3739"/>
        <source>My Data</source>
        <translation>Miei Dati</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3740"/>
        <source>Satellite</source>
        <translation>Satellite</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3986"/>
        <source>You need to select one station callsign to be able to send your log to ClubLog.</source>
        <translation>E&apos; necessario selezionare almeno un nominativo di stazione per poter trasferire il tuo log su ClubLog.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4011"/>
        <source>Do you want to add this QSOs to your ClubLog existing log?</source>
        <translation>Vuoi aggiungere questo QSO al tuo attuale log su ClubLog?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4013"/>
        <source>If you don&apos;t agree, this upload will overwrite your current ClubLog existing log.</source>
        <translation>Se non sei d&apos;accordo, questo trasferimento sopvrascriverà il tuo corrente log su ClubLog.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1647"/>
        <location filename="../mainwindow.cpp" line="1662"/>
        <location filename="../mainwindow.cpp" line="1674"/>
        <location filename="../mainwindow.cpp" line="1684"/>
        <location filename="../mainwindow.cpp" line="1694"/>
        <location filename="../mainwindow.cpp" line="4232"/>
        <source>KLog - eQSL</source>
        <translation>KLog - eQSL</translation>
    </message>
    <message>
        <source>You need to select one station callsign to be able to send your log to eQSL.cc.</source>
        <translation type="vanished">E&apos; necessario selezionare almeno un nominativo di stazione per poter trasferire il tuo log a eQSO.cc.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4123"/>
        <location filename="../mainwindow.cpp" line="4166"/>
        <source>Select the Station Callsign to use when quering LoTW:</source>
        <translation>Seleziona il nominativo di stazione da usare intrerfacciandosi a LoTW:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4141"/>
        <location filename="../mainwindow.cpp" line="4184"/>
        <source>Please check the LoTW setup</source>
        <translation>Prego controllare configurazione LoTW</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4142"/>
        <location filename="../mainwindow.cpp" line="4185"/>
        <source>You have not defined a LoTW user or a proper Station Callsign.
Open the LoTW tab in the Setup and configure your LoTW connection.</source>
        <translation>Utente LoTW non impostato o incorretto nominativo di stazione.
Configura i parametri di connessione di LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4213"/>
        <source>The log is ready to be uploaded to ClubLog.</source>
        <translation>Il log è già stato trasferito su ClubLog.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4214"/>
        <source>All the QSOs in this log has been marked as Modified in the ClubLog status field</source>
        <translation>Tutti i QSO di questo log sono stati marcati come Modificati nel campo di stato di ClubLog</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4219"/>
        <source>KLog could not mark the full log to be sent to ClubLog</source>
        <translation>KLog non hjapotuto marcare l&apos;intero log per il trasferimento a ClubLog</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4220"/>
        <location filename="../mainwindow.cpp" line="4250"/>
        <location filename="../mainwindow.cpp" line="4280"/>
        <source>Something prevented KLog from marking the QSOs as modified. Restart KLog and try again before contacting the KLog developers.</source>
        <translation>Qualcosa ha impedito a KLog di marcare i QSO come modificati. Riavvia KLog e riprova prima di contattare gli sviluppatori di KLog.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4243"/>
        <source>The log is ready to be uploaded to eQSL.cc.</source>
        <translation>Il log è già stato trasferito a eQSL.cc.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4244"/>
        <source>All the QSOs in this log has been marked as Modified in the eQSL.cc status field</source>
        <translation>Tutti i QSO di questo log sono stati marcati come Modificati nel campo stato di eQSL.cc</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4249"/>
        <source>KLog could not mark the full log to be sent to eQSL</source>
        <translation>KLog non ha potuto marcare l&apos;intero log pe ril trasferimento su eQSL</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4629"/>
        <source>Filling QSOs ...</source>
        <translation>Completamento QSO ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4822"/>
        <source>Date/Time</source>
        <translation>Data/Ora</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4824"/>
        <source>Callsign</source>
        <translation>Nominativo</translation>
    </message>
    <message>
        <source>Station Callsign</source>
        <translation type="vanished">Nominativo di stazione</translation>
    </message>
    <message>
        <source>Operator Callsign</source>
        <translation type="vanished">Nominativo operatore</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5511"/>
        <source>KLog - Non-supported mode</source>
        <translation>KLog - modo non supportato</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5514"/>
        <source>A new mode not supported by KLog has been received from an external program or radio:</source>
        <translation>Nuova modalità non supportata da KLog ricevuta da programma esterno o radio:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5514"/>
        <source>Do you want to keep receiving these alerts? (disabling these alerts will prevent non-valid modes being detected)</source>
        <translation>Vuoi continuare a ricecere questi allarmi? (disabilitando gli allarmi impedirai però anche il rilevamento di modalità non valide)</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5687"/>
        <source>Native Error</source>
        <translation>Errore nativo</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5691"/>
        <source>Recommendation:</source>
        <translation>Raccomandazione:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5691"/>
        <source>Periodically export your data to ADIF to prevent a potential data loss.</source>
        <translation>Periodicamente esporta i tuoi dati su file ADIF per prevenire potenziali perdite dati.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3768"/>
        <source>DXCC</source>
        <translation>DXCC</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3757"/>
        <source>Info</source>
        <translation>Info</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3763"/>
        <source>Awards</source>
        <translation>Riconoscimenti</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3764"/>
        <source>Search</source>
        <translation>Ricerca</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3766"/>
        <source>Log</source>
        <translation>Log</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3767"/>
        <source>DX-Cluster</source>
        <translation>DX-CLuster</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1328"/>
        <location filename="../mainwindow.cpp" line="3858"/>
        <location filename="../mainwindow.cpp" line="3872"/>
        <location filename="../mainwindow.cpp" line="4358"/>
        <source>Save ADIF File</source>
        <translation>Salva file ADIF</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3951"/>
        <source>The LoTW upload process has finished and KLog created a file (%1) in your KLog folder.

Do you want KLog to remove that file?</source>
        <translation>Il trasferimento verso LoTW è terminato e KLog ha creato un file (%1) nella tua cartella dati KLog.

Vuoi cancellare il file?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1567"/>
        <location filename="../mainwindow.cpp" line="1685"/>
        <location filename="../mainwindow.cpp" line="3961"/>
        <source>The file has been removed.</source>
        <translation>Il file è stato cancellato.</translation>
    </message>
    <message>
        <source>Upload the queued QSOs to LoTW</source>
        <translation type="vanished">Trasferisce i QSO in coda a LoTW</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="522"/>
        <source>KLog needs to update the Entities database.</source>
        <translation>KLog deve aggiornare il database località.</translation>
    </message>
    <message>
        <source>The backup was done successfully</source>
        <translation type="vanished">Il Backup è stato completato con successo</translation>
    </message>
    <message>
        <source>KLog will remind you to backup your data again in aprox one month.</source>
        <translation type="vanished">KLog ti ricoderà di fare il backup dei tuoi dati ancora fra circa un mese.</translation>
    </message>
    <message>
        <source>The backup was not properly done.</source>
        <translation type="vanished">Il backup NON è stato completato con successo.</translation>
    </message>
    <message>
        <source>It is recommended to backup your data periodically to prevent lose or corruption of your log.</source>
        <translation type="vanished">E&apos; fortemente raccomandabile fare il backup dei tuoi dati periodicamente per prevenire perdite o corruzioni del tuo log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1364"/>
        <source>This operation shall remove definitely all the selected QSO and associated data and you will not be able to recover it again.</source>
        <translation>Questa operazione cancellerà definitivamente tutti i QSO selezionati e dati correlati e non potranno essere recuperati successivamente.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1746"/>
        <source>The QRZ.com upload process has finished with an error and the log was possibly not uploaded.</source>
        <translation>Il processo di trasferimento a QRZ.com è terminato con errori pertanto il log non è stato probabilmente trasferito.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1766"/>
        <source>Do you want to mark as Uploaded all the QSOs uploaded to QRZ.com?</source>
        <translation>Vuoi marcare come già trasferiti tutti i QSO trasferiti a QRZ.com?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1765"/>
        <location filename="../mainwindow.cpp" line="1781"/>
        <location filename="../mainwindow.cpp" line="1792"/>
        <location filename="../mainwindow.cpp" line="4332"/>
        <location filename="../mainwindow.cpp" line="4343"/>
        <source>KLog - QRZ.com</source>
        <translation>KLog - QRZ.com</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1783"/>
        <source>There was an error while updating to Yes the QRZ.com QSO upload information.</source>
        <translation>Si è verificato un errore durante il trasferimento a Sì su QRZ.com nelle informazioni di trasferimento.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1793"/>
        <source>The QRZ.com upload process has finished successfully</source>
        <translation>Il trasferimento si QRZ.com è stato completato con successo</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1865"/>
        <source>Call not found in QRZ.com</source>
        <translation>Nominativo non trovato su QRZ.com</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1745"/>
        <location filename="../mainwindow.cpp" line="1870"/>
        <source>KLog - QRZ.com error</source>
        <translation>KLog errore QRZ.com</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1871"/>
        <source>KLog has received an error from QRZ.com.</source>
        <translation>KLog ha ricevuto una segnalazione di errore da QRZ.com.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1904"/>
        <source>You need to activate the %1 service in the eLog preferences.</source>
        <translation>E&apos; necessario attivare il servizio %1 fra le impostazioni di eLog.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2285"/>
        <source>It is important to export to ADIF and save a copy as a backup.</source>
        <translation>E&apos; importante esportare su ADIF e salvare una copia cone backup per sicurezza.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2289"/>
        <source>Saving the log was done successfully.</source>
        <translation>Salvataggio del log fatto con successo.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2297"/>
        <source>The ADIF export was not properly done.</source>
        <translation>L&apos;esportazione ADIF non è stata correttamente effettuata.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2488"/>
        <location filename="../mainwindow.cpp" line="2501"/>
        <source>Queue all the QSOs to be uploaded</source>
        <translation>Mette in coda tutti i QSO per il trasferimento</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2515"/>
        <source>Queue all the QSO to be uploaded</source>
        <translation>Mette in coda tutti i QSO per il trasferimento</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2916"/>
        <source>You have selected no callsign. KLog will complete the QSOs without a station callsign defined and those with the callsign you are entering here.</source>
        <translation>Non ha selezionato un nominativo, KLog completerò il QSO senza annotare un nominativo di stazione e nessuno dei nominativi che inserisci qua.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2686"/>
        <location filename="../mainwindow.cpp" line="2695"/>
        <location filename="../mainwindow.cpp" line="2731"/>
        <location filename="../mainwindow.cpp" line="2763"/>
        <location filename="../mainwindow.cpp" line="2772"/>
        <location filename="../mainwindow.cpp" line="2957"/>
        <location filename="../mainwindow.cpp" line="2982"/>
        <location filename="../mainwindow.cpp" line="3898"/>
        <location filename="../mainwindow.cpp" line="3925"/>
        <location filename="../mainwindow.cpp" line="3938"/>
        <location filename="../mainwindow.cpp" line="3950"/>
        <location filename="../mainwindow.cpp" line="3960"/>
        <location filename="../mainwindow.cpp" line="4139"/>
        <location filename="../mainwindow.cpp" line="4182"/>
        <source>KLog - LoTW</source>
        <translation>KLog - LoTW</translation>
    </message>
    <message>
        <source>KLog - Stop the war in Ukraine!</source>
        <translation type="vanished">KLog . Ferma la guerra in Ucraina!</translation>
    </message>
    <message>
        <source>KLog - Stop the war in Ukraine!

</source>
        <translation type="vanished">KLog - Ferma la guerra in Ucraina!

</translation>
    </message>
    <message>
        <source>You are using a Russian call (%1).

You can probably help to stop the Russian war, people are dying.

Please call your leaders to stop the war.</source>
        <translation type="vanished">Usi un nominativo Russo (%1).

Puoi probabilmente aiutare a fermare la guerra in Russia, le persone stanno morendo.

Per favore contatta i tuoi leder per fermare la guerra.</translation>
    </message>
    <message>
        <source>You are using an Ukranian call.

Please take care and protect yourself and your family. 

The KLog developers wish you the best of luck in this very difficult moment.</source>
        <translation type="vanished">Usi un nominativo Ucraino.

Per favore prendici cura e proteggi te statto e la tua famiglia.

Gli  sviluppatori di KLog ti augurano ogni fortuna in questo difficile momento.</translation>
    </message>
    <message>
        <source>People are dying in the war of Russia against Ukraine.

You can help to stop the Russian war against Ukraine.

Please show your disagreement to your leaders, or in your social network to stop the war.</source>
        <translation type="vanished">Persone stanno morendo per la guerra della Russia contro l&apos;Ucraina.

Tu puoi aiutare a fermare la guerra della Russia contro l&apos;ucraina.

Per favore mostra il tuo disaccordo ai tuoi leader, oppure sui social network per fermare la guerra.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="405"/>
        <source>KLog - KLog folder not found</source>
        <translation>KLog -cartella KLog non trovata</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="805"/>
        <source>This version of KLog requires that the DXCC database is updated.</source>
        <translation>Questa versione di KLog richiede che il database DXCC sia aggiornato.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="806"/>
        <source>The database will be updated.</source>
        <translation>Il database sarà aggiornato.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="866"/>
        <source>KLog-%1 - Logbook of %2 - QSOs: %3</source>
        <translation>KLog-%1 - Logbook of %2 - QSOs: %3</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="870"/>
        <source>KLog-%1 - Logbook of %2 - Station Callsign: %3 - QSOs: %4</source>
        <translation>KLog-%1 - Logbook of %2 - Nominativo stazione: %3 - QSOs: %4</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1190"/>
        <source>The entity that is selected is different from the one proposed by KLog:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1195"/>
        <location filename="../mainwindow.cpp" line="1202"/>
        <source>Unknown</source>
        <comment>Keep it short, its a button text</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1196"/>
        <source>- There is no selected DXCC.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1203"/>
        <source>- KLog couldn&apos;t find a DXCC</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1206"/>
        <source>Please select the one you want to keep for this QSO.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1720"/>
        <source>KLog - QRZ.com warning</source>
        <translation>KLog - QRZ.com warning</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1721"/>
        <source>QRZ.com has returned a non-subcribed error and queries to QRZ.com will be disabled.</source>
        <translation>QRZ.com ha restituito l&apos;errore di non iscrizione e qundi non sarà possibile  interpellare QRZ.com.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1722"/>
        <source>Please check your QRZ.com subcription or credentials.</source>
        <translation>Per favore controlla la tua iscrizione al servizio QRZ.com.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2398"/>
        <source>Settings ...</source>
        <translation>Impostazioni...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2447"/>
        <source>Queue all QSOs from this log to be sent</source>
        <translation>Metti in coda tutti i QSO da questo log per l&apos;invio</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2557"/>
        <source>Show Map</source>
        <translation>Mostra mappa</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2687"/>
        <source>Do you really want to mark ALL the QSOs of this log to be UPLOADED? Must be done ONLY IF THIS IS YOUR FIRST TIME uploading these QSOs to LoTW.</source>
        <translation>Sei certo di segnare TUTTI i QSO di questo log come da trasmettere? Questa procedura deve essere fatta SOLO SE QUESTO E&apos; il primo trasferimento di QSO verso LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2764"/>
        <source>Do you really want to mark ALL pending QSOs to be UPLOADED? Must be done ONLY IF THIS IS YOUR FIRST TIME uploading these QSOs to LoTW.</source>
        <translation>Sei certo di segnare TUTTI i QSO in sopeso di questo log come da trasmettere? Questa procedura deve essere fatta SOLO SE QUESTO E&apos; il primo trasferimento di QSO verso LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2782"/>
        <source>There was a problem to mark all pending QSOs as queued for LoTW!</source>
        <translation>L&apos;operazione di segnare tutti i QSO in sospeso per la trasmissione verso LoTW ha incontrato dei problemi!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2962"/>
        <source>All queued QSOs of this log has been marked as sent to LoTW!</source>
        <translation>Tutti i QSO di questo log sono stati indicati per la trasmissione verso LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2992"/>
        <source>There was a problem to mark all queued QSOs as sent to LoTW!</source>
        <translation>L&apos;operazione di segnare tutti i QSO per la trasmissione verso LoTW ha incontrato dei problemi!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3926"/>
        <source>TQSL finished with no error.

Do you want to mark as Sent all the QSOs uploaded to LoTW?</source>
        <translation>TQSL terminato senza errori.

Vuoi marcare come Trasmesso per tutti i QSO trasferiti a LoTW?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4002"/>
        <source>The selection you have done does not include any QSO</source>
        <translation>La tua selezione non include nessun QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4047"/>
        <source>The selection you have done does not include any QSO.</source>
        <translation>La tua selezione non non include alcun QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4203"/>
        <location filename="../mainwindow.cpp" line="4233"/>
        <location filename="../mainwindow.cpp" line="4263"/>
        <source>Do you really want to mark ALL your QSOs to be UPLOADED? Must be done ONLY IF THIS IS YOUR FIRST TIME uploading QSOs to %1</source>
        <translation>Davvero vuoi marcare tutti i tuoi QSO come da trasmettere? Questo deve essere fatto solo la prima volta hce trasferisci QSO su %1</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4203"/>
        <source>ClubLog</source>
        <translation>ClubLog</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4262"/>
        <source>KLog - QRZ.COM</source>
        <translation>KLog-QRZ.COM</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4263"/>
        <source>QRZ.COM</source>
        <translation>QRZ.COM</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4273"/>
        <source>The log is ready to be uploaded to QRZ.com.</source>
        <translation>Il log è pronto per il trasaferimento a QRZ.com.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4274"/>
        <source>All the QSOs in this log has been marked as Modified in the QRZ.com status field</source>
        <translation>Tutti i QSO di questo log sono stati marcati come Modificati nel campo di stato su QRZ.com</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4279"/>
        <source>KLog could not mark the full log to be sent to QRZ.com</source>
        <translation>KLog non ha potuto marcare TUTTO il log per il trasfeirmento su QRZ.com</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4333"/>
        <source>To upload QSOs you need a qrz.com subscription. If you have one, go to Setup-&gt;QRZ.com tab to enable it.</source>
        <translation>Per poter trasferire QSO a QRZ.com è necessario essere iscritti al servizio. Se sei iscritto vai alal pagina Setup-&gt; QRZ.com per abilitare la funzionalità.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4344"/>
        <source>You need to define a proper API Key for your QRZ.com logbook in the eLog preferences.</source>
        <translation>E&apos; necessario impostare una valida key API per il tuo logbook QRZ.com fra le impostazioni di eLog.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4370"/>
        <source>Open File</source>
        <translation>Apre File</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4576"/>
        <source> - Needed for DXMarathon</source>
        <translation> - Richiesto per DXMarathon</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4629"/>
        <source>Abort filling</source>
        <translation>Annulla completamento</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4731"/>
        <source>Filling DXCC, CQz, ITUz, Continent in QSOs...
 QSO: </source>
        <translation>Completamento dei campi DXCC, CQz, ITUz, Continente nel QSOs...
 QSO: </translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4820"/>
        <source>Number</source>
        <translation>Numero</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4830"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4832"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4847"/>
        <source>Print Log</source>
        <translation>Stampa Log</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4852"/>
        <source>Abort printing</source>
        <translation>Annulla stampa</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4852"/>
        <source>Printing the log ...</source>
        <translation>Stampa il log ...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4868"/>
        <location filename="../mainwindow.cpp" line="4882"/>
        <source>Printing the log...
 QSO: </source>
        <translation>In stampa il log...
 QSO: </translation>
    </message>
    <message>
        <source>The following QSO data has been received from WSJT-X to be logged:</source>
        <translation type="vanished">I dati del seguente QSO sono stati ricevuti da WSJT-X per essere inseriti nel log:</translation>
    </message>
    <message>
        <source>Freq</source>
        <translation type="vanished">Frequenza</translation>
    </message>
    <message>
        <source>Time On</source>
        <translation type="vanished">Tempo Acceso</translation>
    </message>
    <message>
        <source>Time Off</source>
        <translation type="vanished">Tempo Spento</translation>
    </message>
    <message>
        <source>RST TX</source>
        <translation type="vanished">RST TX</translation>
    </message>
    <message>
        <source>RST RX</source>
        <translation type="vanished">RST RX</translation>
    </message>
    <message>
        <source>DX-Grid</source>
        <translation type="vanished">DX-Grid</translation>
    </message>
    <message>
        <source>Local-Grid</source>
        <translation type="vanished">Local-Grid</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5472"/>
        <source>KLog - WSJTX Dupe QSO</source>
        <translation>KLog - WSJTX Duplica QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5475"/>
        <source>This QSO seems to be duplicated. Do you want to save or discard it?</source>
        <translation>Questo QSO sembra un duplicato. Vuoi salvarlo o scaricarlo?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5514"/>
        <source>If the received mode is correct, please contact KLog development team and request support for that mode</source>
        <translation>Se la modalità di ricezione è corretta, per favore contatta lo staff di sviluppo di KLog per richiedere l&apos;inserimento della nuova modalità</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5672"/>
        <source>KLog - Duplicated satellite</source>
        <translation>KLog - Satellite duplicato</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5673"/>
        <source>A duplicated satellite has been detected in the file and will not be imported.</source>
        <translation>Un satellite duplicato è stato trovato nel file e non sarà importato.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5674"/>
        <source>Please check the satellite information file and ensure it is properly populated.</source>
        <translation>Per favore controlla il file delle informazioni dei satelliti e verifica che effettivamente contenga dei satelliti.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5674"/>
        <source>Now you will see a more detailed error that can be used for debugging...</source>
        <translation>Adesso ti mostro una indicazione di errore più dettagliata da usare come debug...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5684"/>
        <source>An unexpected error ocurred!!</source>
        <translation>Si è verificato un errore inaspettato!!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5684"/>
        <source>If the problem persists, please contact the developers</source>
        <translation>Se il problema continua, per favore contatta gli svipuppatori</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5684"/>
        <source>for analysis:</source>
        <translation>per analisi:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5686"/>
        <source>Error in function</source>
        <translation>Errore in function</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5688"/>
        <source>Error text</source>
        <translation>Messaggio di errore</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5689"/>
        <source>Failed query</source>
        <translation>Query fallita</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5698"/>
        <source>KLog - Show errors</source>
        <translation>KLog - Mostra errori</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5700"/>
        <source>Do you want to keep showing errors?</source>
        <translation>Vuoi mantenere gli errori mostrati?</translation>
    </message>
</context>
<context>
    <name>MainWindowInputComment</name>
    <message>
        <location filename="../inputwidgets/mainwindowinputcomment.cpp" line="46"/>
        <source>Comment</source>
        <translation>Commento</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputcomment.cpp" line="48"/>
        <source>Add a comment for this QSO.</source>
        <translation>Aggiungi un commento per questo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputcomment.cpp" line="51"/>
        <source>Keep this data</source>
        <translation>Tieni questi dati</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputcomment.cpp" line="53"/>
        <location filename="../inputwidgets/mainwindowinputcomment.cpp" line="55"/>
        <source>Data entered in this tab will be copied into the next QSO.</source>
        <translation>Tutti i dati di questa maschera saranno precaricati di default durante l&apos;inserimento del prossimo QSO.</translation>
    </message>
</context>
<context>
    <name>MainWindowInputEQSL</name>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="132"/>
        <source>Date of the ClubLog upload.</source>
        <translation>Data del trasferimento su Clublog.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="133"/>
        <source>Date of the QRZ.com upload.</source>
        <translation>Data di scarico del trasferimento su QRZ.com.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="134"/>
        <source>Date of the eQSL sending.</source>
        <translation>Data di spedizione della eQSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="135"/>
        <source>Date of the eQSL reception.</source>
        <translation>Data di ricezione della eQSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="136"/>
        <source>Date of the LoTW sending.</source>
        <translation>Data dell&apos;invio a LoTW.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="137"/>
        <source>Date of the LoTW reception.</source>
        <translation>Data della ricezione da LoTW.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="140"/>
        <source>Status on QRZ.com.</source>
        <translation>Stato su QRZ.com.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="143"/>
        <source>Status of the LoTW sending.</source>
        <translation>Stato dell&apos;invio a LoTW.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="144"/>
        <source>Status of the LoTW reception.</source>
        <translation>Stato della ricezione da LoTW.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="151"/>
        <source>QRZ.com</source>
        <translation>QRZ.com</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="160"/>
        <source>LoTW Sent</source>
        <translation>Invio a LoTW</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="163"/>
        <source>LoTW Rec</source>
        <translation>Registrazione LoTW</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="139"/>
        <source>Status on ClubLog.</source>
        <translation>Stato di ClubLog.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="141"/>
        <source>Status of the eQSL sending.</source>
        <translation>Stato della spedizione eQSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="142"/>
        <source>Status of the eQSL reception.</source>
        <translation>Stato della ricezione eQSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="148"/>
        <source>ClubLog</source>
        <translation>ClubLog</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="154"/>
        <source>eQSL Sent</source>
        <translation>Invio eQSL</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputeqsl.cpp" line="157"/>
        <source>eQSL Rec</source>
        <translation>Registrazione eQSL</translation>
    </message>
</context>
<context>
    <name>MainWindowInputOthers</name>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="146"/>
        <source>Primary Div</source>
        <translation>Primary Div</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="147"/>
        <source>Secondary Div</source>
        <translation>Secondary Div</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="148"/>
        <source>IOTA</source>
        <translation>IOTA</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="149"/>
        <source>Entity</source>
        <translation>Elemento</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="150"/>
        <source>Propagation mode</source>
        <translation>Modalità di propagazione</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="151"/>
        <source>Others</source>
        <translation>Altri</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="160"/>
        <source>Keep propagation mode</source>
        <translation>Mantieni la modalità propagazione</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="161"/>
        <source>Show All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="163"/>
        <source>Select the primary division for this QSO.</source>
        <translation>Scegli la primary division di questo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="164"/>
        <source>Select the secondary division for this QSO.</source>
        <translation>Scegli la secondary division di questo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="165"/>
        <source>Select the entity for this QSO.</source>
        <translation>Scegli l&apos;elemento di questo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="166"/>
        <source>Select the propagation mode for this QSO.</source>
        <translation>Scegli la modalità di propagazione di questo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="167"/>
        <source>Select the IOTA continent for this QSO.</source>
        <translation>Scegli il continente IOTA di questo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="168"/>
        <source>Select the IOTA reference number for this QSO.</source>
        <translation>Scegli il numero ri riferimento IOTA di questo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="169"/>
        <source>Keeps the same propagation mode for next QSO.</source>
        <translation>Mantiene la stessa modalità propagazione nel prossimo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="170"/>
        <source>Show all subdivisions for the current DXCC Entity.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="172"/>
        <source>Select the appropriate ADIF field for this QSO.</source>
        <translation>Scegli il corretto campo ADIF per questo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="173"/>
        <source>Value for the selected ADIF field.</source>
        <translation>Valore del campo ADIF scelto.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="236"/>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="1151"/>
        <source>None Identified</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="276"/>
        <source>Not Identified</source>
        <translation>Non identificato</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="734"/>
        <source>WWFF Ref</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="795"/>
        <source>Not selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="215"/>
        <source>Not - Not Identified</source>
        <translation>No - Non identificato</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="731"/>
        <source>SOTA Ref</source>
        <translation>SOTA Ref</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="731"/>
        <source>Age</source>
        <translation>Età</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="732"/>
        <source>POTA Ref</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="733"/>
        <source>SIG</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="733"/>
        <source>SIG Info</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="734"/>
        <source>VUCC grids</source>
        <translation>Statistiche VUCC</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputothers.cpp" line="732"/>
        <source>Distance</source>
        <translation>Distanza</translation>
    </message>
</context>
<context>
    <name>MainWindowInputQSL</name>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="103"/>
        <source>QSL Sent</source>
        <translation>Invio QSL</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="106"/>
        <source>QSL Rec</source>
        <translation>Registrazione QSL</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="109"/>
        <source>QSL Via</source>
        <translation>QSL Via</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="112"/>
        <source>QSL Msg</source>
        <translation>Messaggio QSL</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="115"/>
        <source>Status of the QSL sending.</source>
        <translation>Stato invio QSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="116"/>
        <source>Status of the QSL reception.</source>
        <translation>Stato ricezione QSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="117"/>
        <source>QSL sending information.</source>
        <translation>Informazioni spedizione QSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="118"/>
        <source>QSL reception information.</source>
        <translation>Informazioni ricezione QSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="120"/>
        <source>Date of the QSL sending.</source>
        <translation>Data spedizione QSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="121"/>
        <source>Date of the QSL reception.</source>
        <translation>Data ricezione QSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="122"/>
        <source>Message of the QSL.</source>
        <translation>Messaggio QSL.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqsl.cpp" line="123"/>
        <source>QSL via information.</source>
        <translation>Informazioni su Via QSL (modalità invio QSL).</translation>
    </message>
</context>
<context>
    <name>MainWindowInputQSO</name>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="71"/>
        <source>TX RST.</source>
        <translation>TX RST.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="72"/>
        <source>RX RST.</source>
        <translation>RX RST.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="73"/>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="727"/>
        <source>TX Frequency in MHz.</source>
        <translation>Frequenza TX in MHz.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="74"/>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="786"/>
        <source>RX Frequency in MHz.</source>
        <translation>Frequenza RX in MHz.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="75"/>
        <source>Power used by the contacted station.</source>
        <translation>Potenza usata dalla stazione contattata.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="76"/>
        <source>Name of the contacted operator.</source>
        <translation>Nome operatore della stazione contattata.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="77"/>
        <source>QTH of the contacted station.</source>
        <translation>QTH della stazione contattata.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="78"/>
        <source>Locator of the contacted station.</source>
        <translation>Locatori della stazione contattata.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="82"/>
        <source>Watts</source>
        <translation>Watts</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="86"/>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="92"/>
        <source>MHz</source>
        <translation>MHz</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="96"/>
        <source>Split</source>
        <comment>Translator: Split is a common hamradio term. Do not translate unless you are sure.</comment>
        <translation>Split</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="100"/>
        <source>Name</source>
        <translation>Nome</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="104"/>
        <source>QTH</source>
        <translation>QTH</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="108"/>
        <source>DX Locator</source>
        <translation>DX Locator</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="112"/>
        <source>Power(rx)</source>
        <translation>Potenza(rx)</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="116"/>
        <source>RST</source>
        <translation>RST</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="120"/>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="162"/>
        <source>TX</source>
        <translation>TX</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="124"/>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="167"/>
        <source>RX</source>
        <translation>RX</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="157"/>
        <source>Frequency</source>
        <translation>Frequenza</translation>
    </message>
    <message>
        <source>RST(tx)</source>
        <translation type="vanished">RST(tx)</translation>
    </message>
    <message>
        <source>RST(rx)</source>
        <translation type="vanished">RST(rx)</translation>
    </message>
    <message>
        <source>Freq TX</source>
        <translation type="vanished">Frequenza TX</translation>
    </message>
    <message>
        <source>Freq RX</source>
        <translation type="vanished">Frequenza RX</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="367"/>
        <source>DX QTH locator.</source>
        <translation>DX QTH locator.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="375"/>
        <source>DX QTH locator. Format should be Maidenhead like IN70AA up to 10 characters.</source>
        <translation>DX QTH locator. Il formato dovtrebbe seguire la regola come IN70AA fino a 10 caratteri.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="743"/>
        <source>TX Frequency in MHz.
Frequency is not in a hamradio band!</source>
        <translation>Frequenza TX in MHz.
Questa frequenza non appartiene a bande radioamatoriali!</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowinputqso.cpp" line="791"/>
        <source>RX Frequency in MHz.
Frequency is not in a hamradio band!</source>
        <translation>Frequenza RX in MHz.
Questa frequenza non appartiene a bande radioamatoriali!</translation>
    </message>
</context>
<context>
    <name>MainWindowMyDataTab</name>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="129"/>
        <source>Watts</source>
        <translation>Watts</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="131"/>
        <source>Keep this data</source>
        <translation>Mantieni questa data</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="282"/>
        <source>My QTH locator.</source>
        <translation>Mio Locator QTH.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="133"/>
        <source>Power</source>
        <translation>Potenza</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="135"/>
        <source>Operator callsign</source>
        <translation>Operatore di stazione</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="137"/>
        <source>Station Callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="140"/>
        <source>My Locator</source>
        <translation>Il mio Locator</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="294"/>
        <source>My QTH locator. Format should be Maidenhead like IN70AA up to 10 characters.</source>
        <translation>Il formato del QTH locator dovrebbe essere conformato (esempio IN70AA) fino ad un massimo di 10 caratteri.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="546"/>
        <source>My Rig</source>
        <translation>My Rig</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="546"/>
        <source>My Antenna</source>
        <translation>La mia antenna</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="547"/>
        <source>My POTA Ref</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="547"/>
        <source>My SIG</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="548"/>
        <source>My SIG Info</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="548"/>
        <source>My SOTA Ref</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="550"/>
        <source>My WWFF Ref</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>My SOTA_Ref</source>
        <translation type="vanished">Il mio SOTA_Ref</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowmydatatab.cpp" line="549"/>
        <source>My VUCC_GRIDS</source>
        <translation>I miei grafici VUCC</translation>
    </message>
</context>
<context>
    <name>MainWindowSatTab</name>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="105"/>
        <source>Keep this data</source>
        <translation>Mantieni questi dati</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="113"/>
        <source>Name of the Satellite if not in the list. Select: &quot;%1&quot; to enable this box. (format like AO-51).</source>
        <translation>Il nome del satellite non è nella lista. Scegli: &quot;%1&quot; per abilitare questa opzione (formato usato AO-51).</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="116"/>
        <source>Satellite mode used.</source>
        <translation>In uso modalità satellite.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="117"/>
        <source>Select the satellite you are using.</source>
        <translation>Scegli il satellite che stai utilizzando.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="118"/>
        <source>UpLink band.</source>
        <translation>Banda di uplink (uscita).</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="119"/>
        <source>DownLink band.</source>
        <translation>Banda di downlink (ingresso).</translation>
    </message>
    <message>
        <source>Locator of the DX station. This box is synchronized with the Locator box in the QSO tab.</source>
        <translation type="vanished">Locatore della stazione DX. Questo campo è sempre tenuto sincronizzato con il campo Locatore della maschera di inserimento del QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="122"/>
        <source>UpLink</source>
        <translation>Uplink</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="126"/>
        <source>DownLink</source>
        <translation>Downlink</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="130"/>
        <source>Satellite</source>
        <translation>Satellite</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="134"/>
        <source>Mode</source>
        <translation>Modalità</translation>
    </message>
    <message>
        <source>DX Locator</source>
        <translation type="vanished">Locatore DX</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="138"/>
        <source>Other</source>
        <translation>Altro</translation>
    </message>
    <message>
        <source>MHz</source>
        <translation type="vanished">MHz</translation>
    </message>
    <message>
        <source>Locator of the DX station. Format should be Maidenhead like IN70AA up to 10 characters.</source>
        <translation type="vanished">Locatore della stazione DX. Il formato dovrebbe essere conformato (esempio IN70AA) per usare fino a 10 caratteri.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="400"/>
        <source>Not Sat QSO</source>
        <translation>QSO non satellitare</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="438"/>
        <source>KLog has detected a satellite name that it does not recognise. If it should use one of the names of known satellites instead, please select it from the list. Alternatively, please contact the development team to add the new satellite name.</source>
        <translation>Nome di satellite sconosciuto a KLog perché non in elenco. Se hai la necessità specifica di inserire un satellite conosciuto, selezionabile dalla lista, puoi contattare lo staff di sviluppo e chiedere che il nuovo satellite sia inserito.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="439"/>
        <source>Please be aware that the satellite name will not be saved if it is not in the list, so that information may be lost!</source>
        <translation>Per favore, tieni presente che il nome del satellite non sarà salvato se non in elenco, quindi questa informazione può andare persa!</translation>
    </message>
    <message>
        <source>RX Frequency in MHz.
Frequency is not in a hamradio band!</source>
        <translation type="vanished">Frequenza RX in MHz.
Questa frequenza non appartiene a bande radioamatoriali!</translation>
    </message>
    <message>
        <source>RX Frequency in MHz.</source>
        <translation type="vanished">Frequenza RX in MHz.</translation>
    </message>
    <message>
        <source>TX Frequency in MHz.
Frequency is not in a hamradio band!</source>
        <translation type="vanished">Frequenza TX in MHz.
Questa frequenza non appartiene a bande radioamatoriali!</translation>
    </message>
    <message>
        <source>TX Frequency in MHz.</source>
        <translation type="vanished">Frequenza TX in MHz.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="110"/>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="401"/>
        <source>Other - Sat not in the list</source>
        <translation>Altro - Satellite non in elenco</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="107"/>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="109"/>
        <source>Data entered in this tab will be copied into the next QSO.</source>
        <translation>Tutti i dati caricati su questa maschera saranno precaricati nella maschera di inserimento del prossimo QSO.</translation>
    </message>
    <message>
        <location filename="../inputwidgets/mainwindowsattab.cpp" line="439"/>
        <source>The satellite you have in your QSO is: </source>
        <translation>Il satellite del tuo QSO è: </translation>
    </message>
</context>
<context>
    <name>MapWindowWidget</name>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="74"/>
        <source>Select QSOs in this band.</source>
        <translation>Scegli i QSO di questa banda.</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="75"/>
        <source>Select QSOs in this mode.</source>
        <translation>Scegli i QSO in questa modalità.</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="76"/>
        <source>Select QSOs in this propagation mode.</source>
        <translation>Scegli i QSO in questa modalità di propagazione.</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="77"/>
        <source>Select QSOs using this Satellite.</source>
        <translation>Scegli i QSO che utilzizano questo satellite.</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="78"/>
        <source>Only confirmed</source>
        <translation>Solo conferma</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="80"/>
        <source>Select only confirmed QSOs.</source>
        <translation>Scegli solo i QSO confermati.</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="132"/>
        <source>All bands</source>
        <translation>Tute le bande</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="133"/>
        <source>Show nothing</source>
        <translation>Non mostrare niente</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="146"/>
        <source>All modes</source>
        <translation>Tutte le modalità</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="160"/>
        <source>All propagation modes</source>
        <translation>Tutti i modi di propagazione</translation>
    </message>
    <message>
        <location filename="../widgets/map/mapwindowwidget.cpp" line="171"/>
        <source>All satellites</source>
        <translation>Tutti i satelliti</translation>
    </message>
</context>
<context>
    <name>OnlineMessageWidget</name>
    <message>
        <location filename="../widgets/onlinemessagewidget.cpp" line="39"/>
        <source>The server returned the following error: %1</source>
        <translation>Il server ha riportato il seguente errore: %1</translation>
    </message>
    <message>
        <location filename="../widgets/onlinemessagewidget.cpp" line="171"/>
        <source>Not identified</source>
        <translation>Non identificato</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="../awards.cpp" line="753"/>
        <source>New One, work it!</source>
        <translation>Uno nuovo, lavoralo!</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="757"/>
        <location filename="../awards.cpp" line="761"/>
        <location filename="../awards.cpp" line="767"/>
        <location filename="../awards.cpp" line="770"/>
        <location filename="../awards.cpp" line="773"/>
        <location filename="../awards.cpp" line="776"/>
        <location filename="../awards.cpp" line="782"/>
        <location filename="../awards.cpp" line="788"/>
        <source>Needed, work it!</source>
        <translation>Necessario, lavoralo!</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="764"/>
        <location filename="../awards.cpp" line="779"/>
        <location filename="../awards.cpp" line="785"/>
        <location filename="../awards.cpp" line="791"/>
        <source>Worked but not confirmed</source>
        <translation>Processato ma non confermato</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="794"/>
        <source>Confirmed</source>
        <translation>Confermato</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="798"/>
        <source>Not identified</source>
        <translation>Non identificato</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="235"/>
        <location filename="../database.cpp" line="294"/>
        <source>Database Error</source>
        <translation>Errore nel database</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1263"/>
        <source>KLog DB needs to be upgraded.</source>
        <translation>Il DB KLog deve essere aggiornato.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1634"/>
        <source>The process to upgrade is:
- Using an old KLog version export your log to ADIF.
- Remove your logbook.dat file from your KLog folder.
- Install the new KLog version.
- Import your ADIF file.

KLog will finish when you click on OK.</source>
        <translation>La sequenza di aggiornamento è:
- Esporta il log su ADIF utilizzando una vecchia versione di KLog.
- Rimuovi il file logbook.dat dalla tua cartella dati KLog.
- Installa la nuova versione KLog.
- Importa il file ADIF appena esportato.

KLog terminerà appena cliccherai su OK.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1762"/>
        <location filename="../database.cpp" line="3488"/>
        <location filename="../database.cpp" line="3654"/>
        <source>KLog - DB update</source>
        <translation>KLOg - Aggiornamento DB</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1820"/>
        <source>KLog has detected a previous log in the DB. All data will be migrated to a newly created DX type log for you.</source>
        <translation>KLog ha trovato che il DB contiene già un log. Tutto quanto contenuto sarà automaticamente migrato sul tuo nuovo log tipo DX.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1836"/>
        <source>KLog: Enter Station callsign</source>
        <translation>KLog: Inserisci nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1837"/>
        <source>Enter the station callsign used in this log</source>
        <translation>Inserisci il nominativo di stazione usato in questo log</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1838"/>
        <location filename="../utilities.cpp" line="1560"/>
        <source>Station Callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3421"/>
        <location filename="../database.cpp" line="3591"/>
        <location filename="../world.cpp" line="944"/>
        <source>QSO: </source>
        <translation>QSO: </translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3489"/>
        <location filename="../database.cpp" line="3655"/>
        <source>Canceling this update will cause data inconsistencies and possibly data loss. Do you still want to cancel?</source>
        <translation>Annullare questo aggiornamento può causare inconsistenza dei dati e possibile perdita di dati. Ancora convinto/a a procedere con l&apos;annullamento?</translation>
    </message>
    <message>
        <source>Progress: </source>
        <translation type="vanished">Progresso: </translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3402"/>
        <location filename="../database.cpp" line="3421"/>
        <source>Updating mode information...</source>
        <translation>Aggiornamento dati modalità...</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1264"/>
        <source>Do you want to upgrade it now?</source>
        <translation>Vuoi effettuare l&apos;aggiornamento adesso?</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1264"/>
        <source>If DB is not upgraded KLog may not work properly.</source>
        <translation>Se il DB non è aggiornato KLog potrebbe non operare correttamente.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1301"/>
        <source>Upgrading software may potentially cause problems. Backing up your DB, before upgrading, is always a good idea.</source>
        <translation>Aggiornare il software può causare problemi. Fare un backup del tuo DB, prima di procedere con l&apos;aggiornamento, è sempre una buona idea.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1302"/>
        <source>Do you want to backup your DB now?</source>
        <translation>Vuoi fare il backup del tuo DB, adesso?</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1343"/>
        <source>The backup finished successfully.</source>
        <translation>Il backup è terminato correttamente.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1344"/>
        <source>You can find the backup in this file: %1</source>
        <translation>Il tuo backup si trova nel file: %1</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1353"/>
        <source>The backup was not properly done.</source>
        <translation>Il backup NON è stato completato con successo.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1354"/>
        <source>You will be sent back to the starting point.</source>
        <translation>Sarai riportato al punto di partenza.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1632"/>
        <source>KLog - DB can&apos;t be updated automatically</source>
        <translation>KLog - Il DB non può essere aggiornato automaticamente</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1633"/>
        <source>You are upgrading from a too old KLog version and this upgrade can&apos;t be upgraded automatically from that version.</source>
        <translation>Ho trovato una versione KLog troppo vecchia, quindi l&apos;aggiornamento  alla nuova versione non può avvenire in modo automatico.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1880"/>
        <source>All the data was migrated correctly. You should now go to Setup-&gt;Preferences-&gt;Logs to check that everything is okay.</source>
        <translation>Dati migrati correttamente. Adesso devi solo verificare che sia tutto ok nella maschera Configurazione -&gt; Preferenze -&gt; Log.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3402"/>
        <location filename="../database.cpp" line="3572"/>
        <location filename="../world.cpp" line="902"/>
        <source>Abort updating</source>
        <translation>Annulla aggiornamento</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3572"/>
        <location filename="../database.cpp" line="3591"/>
        <source>Updating bands information...</source>
        <translation>Aggiornamento dati bande...</translation>
    </message>
    <message>
        <source>Updating bands information in %1 status...</source>
        <translation type="vanished">Aggiornamento dati bande in %1 stato...</translation>
    </message>
    <message>
        <source>Updating mode information in %1 status...</source>
        <translation type="vanished">Aggiornamento dati modalità in %1 stato...</translation>
    </message>
    <message>
        <source>Updating DXCC award information...</source>
        <translation type="vanished">Trasmissione informazioni DXCC award...</translation>
    </message>
    <message>
        <source>Updating DXCC Award information...</source>
        <translation type="vanished">Trasmissione informazioni DXCC award...</translation>
    </message>
    <message>
        <source>Updating WAZ award information...</source>
        <translation type="vanished">Trasmissione informazioni WAZ award...</translation>
    </message>
    <message>
        <source>Updating WAZ Award information...</source>
        <translation type="vanished">Trasmissione informazioni WAZ award...</translation>
    </message>
    <message>
        <location filename="../main.cpp" line="199"/>
        <source>KLog is already running.</source>
        <translation>Klog è già in esecuzione.</translation>
    </message>
    <message>
        <location filename="../main.cpp" line="199"/>
        <source>It is allowed to run only one instance.</source>
        <translation>Puo essere seguito solo una volta sulla macchina.</translation>
    </message>
    <message>
        <source>Install wizard was canceled before completing...</source>
        <translation type="vanished">L&apos;installazione guidata è stata cancellata prima del completamento dell&apos;operazione...</translation>
    </message>
    <message>
        <source>Do you want to remove the KLog dir from your disk?</source>
        <translation type="vanished">Vuoi rimuovere la cartella KLog dal tuo disco?</translation>
    </message>
    <message>
        <source>Your KLog dir has been removed</source>
        <translation type="vanished">La tua cartella KLog è stata eliminata</translation>
    </message>
    <message>
        <source>I could not remove your KLog dir. You should do it manually if you want it removed from your hard disk.</source>
        <translation type="vanished">Impossibile eliminare la tua cartella KLog. Dovrai eliminarla manualmente dal tuo hard disk.</translation>
    </message>
    <message>
        <source>Your KLog dir could not be removed. You should do it manually if you want it removed from your hard disk.</source>
        <translation type="vanished">Impossibile eliminare la tua cartella KLog. Dovrai eliminarla manualmente dal tuo hard disk.</translation>
    </message>
    <message>
        <source>Remember that your KLog dir is on your system...</source>
        <translation type="vanished">Ricorda che la cartella KLog è sul tuo sistema...</translation>
    </message>
    <message>
        <source>Thank you for running KLog!</source>
        <translation type="vanished">Grazie per aver usato KLog!</translation>
    </message>
    <message>
        <location filename="../world.cpp" line="902"/>
        <source>Updating information...</source>
        <translation>Aggiornamento dati...</translation>
    </message>
    <message>
        <location filename="../world.cpp" line="944"/>
        <source>Updating DXCC and Continent information...</source>
        <translation>Aggiornamento dati DXCC e Continenti...</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1197"/>
        <source>A wrong callsign has been found: %1. Please enter a new callsign or confirm that the current one is a good callsign.</source>
        <translation>Trovato nominativo di stazione errato: %1. Per favore scegli un nuovo nominativo o forza la correttezza del corrente.</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1195"/>
        <source>An empty callsign has been detected. If it is possible, please enter the right call.</source>
        <translation>Nominativo di stazione vuoto trovato. Se possibile, per favore inserisci il giusto nominativo.</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1201"/>
        <source>KLog - Not valid callsign found</source>
        <translation>KLog - Nominativo di stazione trovato non valido</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1428"/>
        <source>Altitude</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1429"/>
        <source>Date</source>
        <translation>Data</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1430"/>
        <source>Call</source>
        <translation>Nominativo</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1431"/>
        <source>RSTtx</source>
        <translation>RSTtx</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1432"/>
        <source>RSTrx</source>
        <translation>RSTrx</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1433"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1434"/>
        <source>Comment</source>
        <translation>Commento</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1435"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1436"/>
        <source>CQz</source>
        <translation>CQz</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1437"/>
        <source>ITUz</source>
        <translation>ITUz</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1438"/>
        <source>DXCC</source>
        <translation>DXCC</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1439"/>
        <source>Address</source>
        <translation>Indirizzo</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1440"/>
        <source>Age</source>
        <translation>Età</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1441"/>
        <source>County</source>
        <translation>Country</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1442"/>
        <source>A_Index</source>
        <translation>A_Index</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1443"/>
        <source>Ant_Az</source>
        <translation>Ant_AZ</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1444"/>
        <source>Ant_El</source>
        <translation>Ant_El</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1445"/>
        <source>Ant_Path</source>
        <translation>Anth_Percorso</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1446"/>
        <source>ARRL_SECT</source>
        <translation>ARRL_SECT</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1447"/>
        <source>Award_Submitted</source>
        <translation>Award Inviato</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1448"/>
        <source>Award_granted</source>
        <translation>Award_concesso</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1449"/>
        <source>Band_RX</source>
        <translation>Banda_RX</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1450"/>
        <source>CheckContest</source>
        <translation>CheckContest</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1451"/>
        <source>Class</source>
        <translation>Class</translation>
    </message>
    <message>
        <source>ClubLog SDate</source>
        <translation type="vanished">ClubLog SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1453"/>
        <source>ClubLog status</source>
        <translation>ClubLog stato</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1454"/>
        <source>Continent</source>
        <translation>Continente</translation>
    </message>
    <message>
        <source>Contacted Op</source>
        <translation type="vanished">Op Contattato</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1456"/>
        <source>Contest Id</source>
        <translation>Id Contest</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1457"/>
        <source>Country</source>
        <translation>Country</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1458"/>
        <source>Credit Submitted</source>
        <translation>Credito Inviato</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1459"/>
        <source>Credit granted</source>
        <translation>Credito concesso</translation>
    </message>
    <message>
        <source>Dark Dok</source>
        <comment>Do not translate if unsure, common hamradio term.</comment>
        <translation type="vanished">Dark-Dok</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1468"/>
        <source>Fists</source>
        <comment>Do not translate if unsure, common hamradio term.</comment>
        <translation>Fists</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1469"/>
        <source>Fists CC</source>
        <comment>Do not translate if unsure, common hamradio term.</comment>
        <translation>Fists CC</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1501"/>
        <source>My Fists</source>
        <comment>Do not translate if unsure, common hamradio term.</comment>
        <translation>My Fists</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1523"/>
        <source>Nr bursts</source>
        <comment>Do not translate if unsure, common hamradio term.</comment>
        <translation>Nr bursts</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1524"/>
        <source>Nr pings</source>
        <comment>Do not translate if unsure, common hamradio term.</comment>
        <translation>Nr pings</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1548"/>
        <source>Sat mode</source>
        <translation>Modo Sat</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1562"/>
        <source>SWL</source>
        <comment>Do not translate if unsure, common hamradio term.</comment>
        <translation>SWL</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1567"/>
        <source>Ten-Ten</source>
        <comment>Do not translate, it is a hamradio group name.</comment>
        <translation>Ten-Ten</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1461"/>
        <source>Distance</source>
        <translation>Distanza</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1452"/>
        <source>ClubLog SDate</source>
        <comment>Date when it was sent</comment>
        <translation type="unfinished">ClubLog SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1455"/>
        <source>Contacted_Op</source>
        <translation>Operatore_contattato</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1460"/>
        <source>Darc Dok</source>
        <comment>Do not translate if unsure, common hamradio term.</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1462"/>
        <source>Email</source>
        <translation>Email</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1463"/>
        <source>EQ_Call</source>
        <translation>EQ_Nominativo</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1464"/>
        <source>eQSL RDate</source>
        <translation>eQSL RDate</translation>
    </message>
    <message>
        <source>eQSL SDate</source>
        <translation type="vanished">eQSL SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1466"/>
        <source>eQSL Rcvd</source>
        <translation>eQSL Rcvd</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1467"/>
        <source>eQSL Sent</source>
        <translation>eQSL Sent</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1470"/>
        <source>Force Init</source>
        <translation>Forza Init</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1471"/>
        <source>Freq</source>
        <translation>Frequenza</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1472"/>
        <source>Freq RX</source>
        <translation>Frequenza RX</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1473"/>
        <source>Gridsquare</source>
        <translation>Statisticaa</translation>
    </message>
    <message>
        <source>Guest OP</source>
        <translation type="vanished">Operatore ospite</translation>
    </message>
    <message>
        <source>HRDLog SDate</source>
        <translation type="vanished">HRDLog SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1478"/>
        <source>HRDLog status</source>
        <translation>HRDLog stato</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1481"/>
        <source>IOTA</source>
        <translation>IOTA</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1482"/>
        <source>IOTA Island id</source>
        <translation>IOTA Id isola</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1483"/>
        <source>K Index</source>
        <translation>Indice K</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1484"/>
        <source>Lat</source>
        <translation>lat</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1485"/>
        <source>Lon</source>
        <translation>Long</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1486"/>
        <source>LoTW RDate</source>
        <translation>LoTW RDate</translation>
    </message>
    <message>
        <source>LoTW SDate</source>
        <translation type="vanished">LoTW SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1488"/>
        <source>LoTW Rcvd</source>
        <translation>LoTW Rcvd</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1489"/>
        <source>LoTW Sent</source>
        <translation>LoTW Sent</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1491"/>
        <source>Max Bursts</source>
        <translation>Burst Max</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1492"/>
        <source>MS Shower</source>
        <translation>MS Shower</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1494"/>
        <source>My Antenna</source>
        <translation>Mia antenna</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1496"/>
        <source>My City</source>
        <translation>Mia città</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1497"/>
        <source>My Cnty</source>
        <translation>Mio country</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1498"/>
        <source>My Country</source>
        <translation>Mio Country</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1499"/>
        <source>My CQz</source>
        <translation>Mio CQx</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1500"/>
        <source>My DXCC</source>
        <translation>Mio DXCC</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1502"/>
        <source>My Gridsquare</source>
        <translation>Mie statistiche</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1504"/>
        <source>My IOTA</source>
        <translation>Mio IOTA</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1505"/>
        <source>My IOTA island id</source>
        <translation>Mio id isola IOTA</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1506"/>
        <source>My ITUz</source>
        <translation>Mio ITUz</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1507"/>
        <source>My Lat</source>
        <translation>Mia Lat</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1508"/>
        <source>My Lon</source>
        <translation>Mia Long</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1509"/>
        <source>My Name</source>
        <translation>Mio nome</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1510"/>
        <source>My Postal code</source>
        <translation>Mio codice postale</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1512"/>
        <source>My Rig</source>
        <translation>Mio Rig</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1513"/>
        <source>My Sig</source>
        <translation>Mio Sig</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1514"/>
        <source>My Sig Info</source>
        <translation>Mie info Sig</translation>
    </message>
    <message>
        <source>My SOTA ref</source>
        <translation type="vanished">Mie ref SOTA</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1516"/>
        <source>My State</source>
        <translation>Mio stato</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1517"/>
        <source>My Street</source>
        <translation>Mia Via</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1518"/>
        <source>My USACA counties</source>
        <translation>Miei counties USACA</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1519"/>
        <source>My VUCC grids</source>
        <translation>Mia statistica VUCC</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1521"/>
        <source>Name</source>
        <translation>Nome</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1522"/>
        <source>Notes</source>
        <translation>Note</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1525"/>
        <source>Operator</source>
        <translation>Operatore</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1526"/>
        <source>Owner Callsign</source>
        <translation>Nominativo proprietario</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1528"/>
        <source>Pfx</source>
        <translation>Pfx</translation>
    </message>
    <message>
        <source>Points</source>
        <translation type="vanished">Punti</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1465"/>
        <source>eQSL SDate</source>
        <comment>Date when it was sent</comment>
        <translation type="unfinished">eQSL SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1474"/>
        <source>Gridsquare ext</source>
        <comment>Extended gridsquare</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1475"/>
        <source>HamLog status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1476"/>
        <source>HamLog SDate</source>
        <comment>Date when it was sent</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1477"/>
        <source>HRDLog SDate</source>
        <comment>Date when it was sent</comment>
        <translation type="unfinished">HRDLog SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1479"/>
        <source>HamQTH status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1480"/>
        <source>HamQTH SDate</source>
        <comment>Date when it was sent</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1487"/>
        <source>LoTW SDate</source>
        <comment>Date when it was sent</comment>
        <translation type="unfinished">LoTW SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1490"/>
        <source>Marcado</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1493"/>
        <source>My Altitude</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1495"/>
        <source>My ARRL Sect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1503"/>
        <source>My Gridsquare Ext</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1511"/>
        <source>My POTA</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1515"/>
        <source>My SOTA</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1520"/>
        <source>My WWFF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1527"/>
        <source>POTA</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1529"/>
        <source>Precedence</source>
        <translation>Priorità</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1530"/>
        <source>Prop Mode</source>
        <translation>Prop Mode</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1531"/>
        <source>Public Key</source>
        <translation>Chiave pubblica</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1532"/>
        <source>QRZcom SDate</source>
        <translation>QRZcom SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1533"/>
        <source>QRZcom status</source>
        <translation>QRZcom stato</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1534"/>
        <source>QSL msg</source>
        <translation>QSL msg</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1535"/>
        <source>QSL RDate</source>
        <translation>QSL RDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1536"/>
        <source>QSL SDate</source>
        <translation>QSL SDate</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1537"/>
        <source>QSL Rcvd</source>
        <translation>QSL Rcvd</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1538"/>
        <source>QSL Sent</source>
        <translation>QSL Sent</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1539"/>
        <source>QSL rcvd via</source>
        <translation>QSL rcvd via</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1540"/>
        <source>QSL sent via</source>
        <translation>QSL sent via</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1541"/>
        <source>QSL via</source>
        <translation>QSL via</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1542"/>
        <source>QSO complete</source>
        <translation>QSO completo</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1543"/>
        <source>QSO random</source>
        <translation>QSO random</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1544"/>
        <source>QTH</source>
        <translation>QTH</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1545"/>
        <source>Region</source>
        <translation>Regione</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1546"/>
        <source>Rig</source>
        <translation>Rig</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1547"/>
        <source>RX Pwr</source>
        <translation>RX Pwr</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1549"/>
        <source>Sat name</source>
        <translation>Nome satellite</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1550"/>
        <source>SFI</source>
        <translation>SFI</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1551"/>
        <source>Sig</source>
        <translation>Sig</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1552"/>
        <source>Sig Info</source>
        <translation>Sig Info</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1553"/>
        <source>Silent key</source>
        <comment>Do not translate if unsure, common hamradio term.</comment>
        <translation>Silent key</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1554"/>
        <source>SKCC</source>
        <translation>SKCC</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1555"/>
        <source>SOTA Ref</source>
        <translation>SOTA Ref</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1556"/>
        <source>SRX String</source>
        <translation>SRX String</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1557"/>
        <source>SRX</source>
        <translation>SRX</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1558"/>
        <source>STX String</source>
        <translation>STX String</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1559"/>
        <source>State</source>
        <translation>Stato</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1561"/>
        <source>Submode</source>
        <translation>Sub-modo</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1563"/>
        <source>UKSMG</source>
        <translation>UKSMG</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1564"/>
        <source>USACA counties</source>
        <translation>USACA counties</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1565"/>
        <source>VE prov</source>
        <translation>VE prov</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1566"/>
        <source>VUCC grids</source>
        <translation>VUCC statistiche</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1568"/>
        <source>TX Pwr</source>
        <translation>TX Pwr</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1569"/>
        <source>Web</source>
        <translation>Web</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1570"/>
        <source>WWFF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1571"/>
        <source>QSO Date off</source>
        <translation>QSO Date spenta</translation>
    </message>
    <message>
        <location filename="../utilities.cpp" line="1572"/>
        <source>Log number</source>
        <translation>Log number</translation>
    </message>
</context>
<context>
    <name>SearchWidget</name>
    <message>
        <location filename="../searchwidget.cpp" line="56"/>
        <source>&amp;Clear</source>
        <translation>&amp;Pulisci</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="58"/>
        <location filename="../searchwidget.cpp" line="765"/>
        <source>&amp;Select All</source>
        <translation>&amp;Seleziona Tutto</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="59"/>
        <source>&amp;Search</source>
        <translation>&amp;Cerca</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="57"/>
        <source>&amp;Export Highlighted</source>
        <translation>&amp;Esporta elementi evidenziati</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="60"/>
        <source>All logs</source>
        <translation>Tutti i log</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="168"/>
        <source>Clear the searches.</source>
        <translation>Pulisce le ricerche.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="169"/>
        <source>Export the search result to an ADIF file.</source>
        <translation>Esporta i risultati della ricerca su un file ADIF.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="170"/>
        <source>Select/Unselect all the QSOs shown.</source>
        <translation>Seleziona/deleseziona tutti i QSO mostrati.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="171"/>
        <source>Search in the log.</source>
        <translation>Cerca nel log.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="172"/>
        <source>Search in all logs.</source>
        <translation>Cerca in tutti i log.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="173"/>
        <source>Enter the callsign to search for. Enter &apos;*&apos; to show all the QSOs... it may be slow in big logs!</source>
        <translation>Scegli il nominativo da cercare per Enter &apos;*&apos; per mostrare tutti i QSO.. potrebbe essere lento sui log molto luunghi!</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="175"/>
        <source>Select the Station Callsign used to do this QSO.</source>
        <translation>Scegli il nominativo di stazione usato in questo QSO.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="373"/>
        <source>All in log</source>
        <translation>Tutto il log</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="374"/>
        <source>Not defined</source>
        <translation>Non definito</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="772"/>
        <source>&amp;Clear selection</source>
        <translation>&amp;Pulisce selezione</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="830"/>
        <source>Save File</source>
        <translation>Salva File</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="257"/>
        <source>You have requested to delete the QSO with: %1</source>
        <translation>Hai chiesto di cancellare il QSO con: %1</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="262"/>
        <source>Are you sure?</source>
        <translation>Sei sicuro?</translation>
    </message>
</context>
<context>
    <name>SearchWindow</name>
    <message>
        <location filename="../searchwindow.cpp" line="88"/>
        <location filename="../searchwindow.cpp" line="93"/>
        <source>Date/Time</source>
        <translation>Data/Ora</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="88"/>
        <location filename="../searchwindow.cpp" line="93"/>
        <location filename="../searchwindow.cpp" line="204"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="88"/>
        <location filename="../searchwindow.cpp" line="93"/>
        <location filename="../searchwindow.cpp" line="209"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="88"/>
        <location filename="../searchwindow.cpp" line="93"/>
        <location filename="../searchwindow.cpp" line="215"/>
        <source>QSL Sent</source>
        <translation>QSL Trasmessa</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="88"/>
        <location filename="../searchwindow.cpp" line="93"/>
        <location filename="../searchwindow.cpp" line="219"/>
        <location filename="../searchwindow.cpp" line="311"/>
        <source>QSL Rcvd</source>
        <translation>QSL Ricevuta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="88"/>
        <source>Station Callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="88"/>
        <location filename="../searchwindow.cpp" line="93"/>
        <source>ID</source>
        <translation>ID</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="88"/>
        <location filename="../searchwindow.cpp" line="93"/>
        <location filename="../searchwindow.cpp" line="198"/>
        <source>Call</source>
        <translation>Nominativo</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="193"/>
        <source>Date/time</source>
        <translation>Data/ora</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="225"/>
        <source>Station callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="293"/>
        <source>QSL Send</source>
        <translation>Trasmette QSL</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="372"/>
        <source>&amp;Delete</source>
        <translation>&amp;Cancella</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="373"/>
        <source>Delete a QSO</source>
        <translation>Cancella un QSO</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="376"/>
        <source>&amp;Edit QSO</source>
        <translation>&amp;Modifica QSO</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="377"/>
        <source>Edit this QSO</source>
        <translation>Modifica questo QSO</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="380"/>
        <source>Via &amp;bureau</source>
        <translation>Via &amp;bureau</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="381"/>
        <source>Send this QSL via bureau</source>
        <translation>Trasmetti la QSL via bureau</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="384"/>
        <source>D&amp;irect</source>
        <translation>D&amp;irect</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="385"/>
        <source>Send this QSL via direct</source>
        <translation>Trasmetti la QSL via direct</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="388"/>
        <source>Via bureau</source>
        <translation>Via bureau</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="389"/>
        <source>QSL &amp;received via bureau</source>
        <translation>QSL &amp;ricevuta via bureau</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="392"/>
        <source>Direct</source>
        <translation>Direct</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="393"/>
        <source>QSL received via direc&amp;t</source>
        <translation>QSL ricevuta via direc&amp;t</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="396"/>
        <source>Check in QRZ.com</source>
        <translation>Controlla su QRZ.com</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="397"/>
        <source>Check this callsign in QRZ.com</source>
        <translation>Controlla questo nominativo su QRZ.com</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="400"/>
        <source>Check in DXHeat.com</source>
        <translation>Controlla su DXHeat.com</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="401"/>
        <source>Check this callsign in DXHeat.com</source>
        <translation>Controlla questo nominativo su DXHeat.com</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="404"/>
        <source>&amp;Request my QSL</source>
        <translation>&amp;Richiedi la mia QSL</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="405"/>
        <source>Mark my QSL as requested</source>
        <translation>Segna la mia QSL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="408"/>
        <source>Via Direct and mark DX QSL as requested</source>
        <translation>Via Diretto e indica la QSL del DX come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="409"/>
        <source>Send this QSL via direct and mark DX QSL as requested</source>
        <translation>Spedisce questa QSL via diretto e indica la QSL del DX come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="412"/>
        <source>Via Bureau and mark DX QSL as requested</source>
        <translation>Via Bureau e segna la QSL del DX come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="413"/>
        <source>Send this QSL via bureau and mark DX QSL as requested</source>
        <translation>Spedisce questa QSL via bureau e segna la QSL del DX come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="416"/>
        <source>&amp;Request the QSL</source>
        <translation>&amp;Richiedi la QSL</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="417"/>
        <source>Mark the QSL as requested</source>
        <translation>Segna la QSL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="420"/>
        <source>Via bureau and mark my QSL as requested</source>
        <translation>Via bureau e segna la mia QSL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="421"/>
        <source>QSL received via bureau and mark my QSL as requested</source>
        <translation>QSL ricevuta via bureau e segna lamia SQL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="424"/>
        <source>Direc&amp;t and mark as my QSL requested</source>
        <translation>Dire&amp;tto e segna come mia QSL richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="425"/>
        <source>QSL received via direct and mark my QSL as requested</source>
        <translation>QSL ricevuta via diretto e segna la mia QSL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="646"/>
        <source>Needed QSO to send the QSL</source>
        <translation>QSO che richiedono l&apos;invio della QSL</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="654"/>
        <source>My QSL requested to be sent</source>
        <translation>La mia richiesta di QSL da inviare</translation>
    </message>
    <message>
        <location filename="../searchwindow.cpp" line="659"/>
        <location filename="../searchwindow.cpp" line="664"/>
        <source>DX QSL pending to be received</source>
        <translation>QSL di DX in attesa di ricezione</translation>
    </message>
</context>
<context>
    <name>SetupDialog</name>
    <message>
        <location filename="../setupdialog.cpp" line="78"/>
        <location filename="../setupdialog.cpp" line="296"/>
        <source>Bands/Modes</source>
        <translation>Bande/modi</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="302"/>
        <source>DX-Cluster</source>
        <translation>DX-CLuster</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="81"/>
        <location filename="../setupdialog.cpp" line="308"/>
        <source>Colors</source>
        <translation>Colori</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="82"/>
        <location filename="../setupdialog.cpp" line="314"/>
        <source>Misc</source>
        <translation>Altro</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="83"/>
        <source>World Editor</source>
        <translation>Editor mondiale</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="84"/>
        <location filename="../setupdialog.cpp" line="290"/>
        <source>Logs</source>
        <translation>Log</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="430"/>
        <source>Go to the Misc tab and click on Move DB
 or the DB will not be moved to the new location.</source>
        <translation>Vai nella linguetta Altro e clicca su Muove DB
 oppure il DB non sarà spostato nel nuovo percorso.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="92"/>
        <source>Cancel</source>
        <translation>Annulla</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="87"/>
        <source>Satellites</source>
        <translation>Satelliti</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="89"/>
        <source>HamLib</source>
        <translation>HamLib</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="85"/>
        <source>eLog</source>
        <translation>eLog</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="93"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="77"/>
        <location filename="../setupdialog.cpp" line="284"/>
        <source>User data</source>
        <translation>Dati utente</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="79"/>
        <source>Log widget</source>
        <translation>Log widget</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="80"/>
        <source>D&amp;X-Cluster</source>
        <translation>D&amp;X-Cluster</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="86"/>
        <source>WSJT-X</source>
        <translation>WSJT-X</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="110"/>
        <source>Settings</source>
        <translation>Impostazioni</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="256"/>
        <source>You need to enter at least one log in the Logs tab.</source>
        <translation>Nella configurazione log deve essere caricato almeno un log.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="257"/>
        <source>Do you want to add one log in the Logs tab or exit KLog?
(Click Yes to add a log or No to exit KLog)</source>
        <translation>Vuoi aggiungere un log nella maschera configrazione Log o vuoi terminare KLog?
(Clicca Sì per aggiungere un log oppure No per uscire da KLog)</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="320"/>
        <source>World</source>
        <translation>Mondo</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="429"/>
        <source>DB has not been moved to new path.</source>
        <translation>Il DB non è stato spostato nel nuovo percorso.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="441"/>
        <source>You need to enter at least a valid callsign.</source>
        <translation>Devi inserire almeno un nominativo valido.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="442"/>
        <source>Go to the User tab and enter valid callsign.</source>
        <translation>Vai alla tab Utente e inserisci il nominatio valido.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="454"/>
        <source>You will be redirected to the Log tab.
Please add and select the kind of log you want to use.</source>
        <translation>Adesso ti porto nella maschera di configurazione dei log.
Per favore aggiungi /seleziona il tipo di log che ti serve.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="453"/>
        <source>You have not selected the kind of log you want.</source>
        <translation>Non hai selezionato il tipo di log che ti interessa.</translation>
    </message>
</context>
<context>
    <name>SetupEntityDialog</name>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="67"/>
        <source>Entity</source>
        <translation>Collegamento</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="71"/>
        <source>CQ</source>
        <translation>CQ</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="75"/>
        <source>ITU</source>
        <translation>ITU</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="83"/>
        <source>Latitude</source>
        <translation>latitudine</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="87"/>
        <source>Longitude</source>
        <translation>Longitudine</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="91"/>
        <source>UTC</source>
        <translation>UTC</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="95"/>
        <source>Main prefix</source>
        <translation>Prefisso principale</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="101"/>
        <source>ARRL ID</source>
        <translation>ARRL ID</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="111"/>
        <source>Comma separated possible prefixes, e.g. EA1, EA2, ...</source>
        <translation>I prefissi sono separati da virgole, es. EA1,EA2, ...</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="109"/>
        <source>Prefixes</source>
        <translation>Prefissi</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="69"/>
        <source>Name of the Entity.</source>
        <translation>Nome del collegamento.</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="73"/>
        <source>CQ zone.</source>
        <translation>Zona CQ.</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="77"/>
        <source>ITU zone.</source>
        <translation>Zona ITU.</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="85"/>
        <location filename="../setuppages/setupentitydialog.cpp" line="89"/>
        <source>Longitude of the Entity.</source>
        <translation>Longitudine del collegamento.</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="93"/>
        <source>Local time difference to UTC.</source>
        <translation>Differenza tra ora locale e UTC.</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="97"/>
        <source>Main prefix of the entity.</source>
        <translation>Prefisso principale del collegamento.</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="103"/>
        <source>ARRL ID.</source>
        <translation>ARRL ID.</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="114"/>
        <source>Date of the deletion.</source>
        <translation>Data della cancellazione.</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="116"/>
        <source>Deleted</source>
        <translation>Cancellato</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="118"/>
        <source>Cancel</source>
        <translation>Annulla</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="119"/>
        <source>Ok</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location filename="../setuppages/setupentitydialog.cpp" line="207"/>
        <source>Entity Dialog</source>
        <translation>Maschera inserimento collegamento</translation>
    </message>
</context>
<context>
    <name>SetupPageBandMode</name>
    <message>
        <location filename="../setuppages/setuppagebandmode.cpp" line="42"/>
        <source>Bands</source>
        <translation>Bande</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagebandmode.cpp" line="46"/>
        <source>Modes</source>
        <translation>Modi</translation>
    </message>
</context>
<context>
    <name>SetupPageColors</name>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="45"/>
        <source>New One</source>
        <translation>Uno nuovo</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="46"/>
        <source>Needed in this band</source>
        <translation>Necessario in questa banda</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="47"/>
        <source>Worked in this band</source>
        <translation>Processato per questa banda</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="48"/>
        <source>Confirmed in this band</source>
        <translation>Comfermato in questa banda</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="49"/>
        <source>Default</source>
        <translation>Default</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="50"/>
        <source>WSJT-X palette</source>
        <translation>WSJT-X palette colori</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="51"/>
        <source>Default palette</source>
        <translation>Default palette colori</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="52"/>
        <location filename="../setuppages/setuppagecolors.cpp" line="322"/>
        <source>Dark Mode</source>
        <translation>Visualizzazione notturna</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="54"/>
        <source>Color when the DXCC is an ATNO (All Time New One).</source>
        <translation>Colore usato quando il DXCC è un ATNO (Sempre nuovo).</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="57"/>
        <source>DXCC is confirmed in this band.</source>
        <translation>DXCC confermato in questa banda.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="58"/>
        <source>Default color.</source>
        <translation>Colore di default.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="59"/>
        <source>Sets a palette of colors similar to the one used in WSJT-X.</source>
        <translation>Seleziona una palette di colori simile a quella usata in WSJT-X.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="60"/>
        <source>Sets the default palette.</source>
        <translation>Seleziona la palette di default.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="303"/>
        <source>Light Mode</source>
        <translation>Visualizzazione diurna</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="55"/>
        <source>This DXCC was worked before in another band but not in the selected band. It may be needed due to the CQ, ITU, Grid, ...</source>
        <translation>Questo DXCC è stato processato prima in un&apos;altra banda, ma non nella banda richiesta. Magari a causa del CQ, ITU, Grid, ...</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="56"/>
        <source>Worked DXCC, but not confirmed in this band.</source>
        <translation>DXCC processato, ma non confermato per questa banda.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="61"/>
        <source>Sets the Dark Mode</source>
        <translation>Attiva la visualizzazione notturna</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagecolors.cpp" line="172"/>
        <source>Choose a color</source>
        <translation>Scegli un colore</translation>
    </message>
</context>
<context>
    <name>SetupPageDxCluster</name>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="75"/>
        <source>Add</source>
        <translation>Aggiunge</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="76"/>
        <source>Delete</source>
        <translation>Cancella</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="78"/>
        <source>Show &amp;HF spots</source>
        <translation>Elenca spots &amp;HF</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="79"/>
        <source>Show V/&amp;UHF spots</source>
        <translation>Elenca spots V/&amp;UHF</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="80"/>
        <source>Show W&amp;ARC spots</source>
        <translation>Elenca spots W&amp;ARC</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="81"/>
        <source>Show &amp;worked spots</source>
        <translation>Elenca spots &amp;processati</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="82"/>
        <source>Show &amp;confirmed spots</source>
        <translation>Elenca spot &amp;confermati</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="83"/>
        <source>Show ANN/&amp;FULL messages</source>
        <translation>Elenca messaggi ANN/&amp;PIENO</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="84"/>
        <source>Show WW&amp;V messages</source>
        <translation>Elenca messaggi WW&amp;V</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="85"/>
        <source>Show WC&amp;Y messages</source>
        <translation>Elenca messaggi WC&amp;Y</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="86"/>
        <source>Save DX Cluster activity</source>
        <translation>Salva le attività del DX Cluster</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="87"/>
        <source>Saves all the DX-Cluster activity to a file in the KLog folder</source>
        <translation>Salva tutte le attività del DX Cluster su un file nella cartella KLog</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="89"/>
        <source>Send DX Spots to the map</source>
        <translation>Invia Spot DX alla mappa</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="90"/>
        <source>Sends the received DX Spots to the map to know where is the activity.</source>
        <translation>Invia gli spot DX ricevuti alla mappa per far sapere dove c&apos;è attività.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="92"/>
        <source>DX Spots</source>
        <translation>DX Spots</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="103"/>
        <source>Others</source>
        <translation>Altri</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="111"/>
        <source>Messages</source>
        <translation>Messaggi</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="180"/>
        <source>KLog: Add a DXCluster server</source>
        <translation>KLog: Aggiungi un server DXCluster</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagedxcluster.cpp" line="181"/>
        <source>Add the address followed by the :port
Example: dxfun.com:8000
If no port is specified, 41112 will be used by default:</source>
        <translation>Aggiungi un indirizzo seguito da una :porta
Esempio: dxfun.com:8000
Se nessuna porta è esplicitamente indicata, la 41112 sarà usata di default:</translation>
    </message>
</context>
<context>
    <name>SetupPageELog</name>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="46"/>
        <source>Default</source>
        <translation type="unfinished">Default</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="47"/>
        <source>ClubLog password</source>
        <translation>Password ClubLog</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="48"/>
        <source>ClubLog App password</source>
        <translation>ClubLog App password</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="49"/>
        <source>ClubLog email</source>
        <translation>Email ClubLog</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="55"/>
        <source>Enter the email you used to register in ClubLog.</source>
        <translation>Inserisci l&apos;email scelta durante la registrazione a ClubLog.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="56"/>
        <source>Enter your password ClubLog here. Warning: The password will be save on clear in the KLog config file!! (If you don&apos;t want to enter the password, KLog will ask you when it is needed.)</source>
        <translation>Inserisci qua la tua password ClubLog. Attenzione: La password sarà salvata in chiaro all&apos;interno del file di configurazione di KLog!! (Se non vuoi inserire la password, Kalog te la chiederà ogni volta quando necesaria.)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="57"/>
        <source>Enter your application password ClubLog here. It can be obtained in ClubLog (Settings &gt; App Passwords menu). Warning: The app password will be save on clear in the KLog config file!!</source>
        <translation>Inserisci qua la password della tua applicazione ClubLog. La puoi ottenere su ClubLog (Settings &gt; App Password menu). Attenzione: la password sarà salvata in chiaro nel file di configurazione di KLog!!</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="63"/>
        <source>Send QSOs in real time</source>
        <translation>Trasferisci QSO in tempo reale</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="64"/>
        <source>Activate ClubLog</source>
        <translation>Attiva ClubLog</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="65"/>
        <source>Send each QSO to ClubLog in real time, as they are added (or modified) in KLog.</source>
        <translation>Trasferisci ogni QSO a ClubLog in tempo reale, appena aggiunti (o modificati) su KLog.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="66"/>
        <source>Starts the ClubLog support in KLog.</source>
        <translation>Avvia il supporto ClubLog su KLog.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="71"/>
        <source>Activate eQSL.cc</source>
        <translation>Attiva eQSL.cc</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="72"/>
        <source>Enter your username of eQSL.cc.</source>
        <translation>Inserisci il tuo nome utente di eQSL.cc.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="73"/>
        <source>Enter your password eQSL.cc here. Warning: The password will be save on clear in the KLog config file!! (If you don&apos;t want to enter the password, KLog will ask you when it is needed.)</source>
        <translation>Inserisci qua la password per eQSL.cc, Attenzione: la password sarà salvata in chiaro ill&apos;interno del file di configurazione di KLog!! (Se non vuoi tenere qua la password, Klog te la chiderà ogno volta che sarà necessaria)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="76"/>
        <source>eQSL.cc password</source>
        <translation>Password eQSL.cc</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="77"/>
        <source>eQSL.cc user</source>
        <translation>Nome utente eQSL.cc</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="83"/>
        <source>ClubLog</source>
        <translation>ClubLog</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="84"/>
        <source>eQSL.cc</source>
        <translation>eQSL.CC</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="94"/>
        <location filename="../setuppages/setuppageelog.cpp" line="95"/>
        <source>Select the default option for new QSOs in Clublog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="124"/>
        <location filename="../setuppages/setuppageelog.cpp" line="125"/>
        <source>Select the default option for new QSOs in eQSL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="136"/>
        <source>QRZ.com</source>
        <translation>QRZ.com</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="142"/>
        <source>Enter the user of your QRZ.com account. You need to be subscribed to QRZ.com to use this service.</source>
        <translation>Inserisci l&apos;utente del tuo aaccount qrz.COM. Devi essere registrato aa QRZ.com per usare questo servizio.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="144"/>
        <source>User</source>
        <translation>Utente</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="147"/>
        <source>Enter your password QRZ.com here. Warning: The password will be save on clear in the KLog config file!! (If you don&apos;t want to enter the password, KLog will ask you when it is needed.)</source>
        <translation>Inserisci qua la tua password QRZ.com. Warning: La password sarà salvata in chiaro all&apos;interno del file di configurazione di KLog!! (Se non vuoi inserirla qua Klog te la chiederà ogno colta che sarà necessaria.)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="150"/>
        <source>Password</source>
        <translation>Password</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="151"/>
        <source>Activate QRZ.com</source>
        <translation>Attiva QRZ.com</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="152"/>
        <source>Check automatically</source>
        <translation>Controllo automatico</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="153"/>
        <source>Check in Qrz.com all Calls as they are entered</source>
        <translation>Verifica su QRZ.com tutti i nominativi ma mano che sono inseriti</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="155"/>
        <source>Paying Subscriber</source>
        <translation>Pagamento Sottoscrizione</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="156"/>
        <source>Check it if you are paying for a qrz.com subscription</source>
        <translation>Controlla di stare pagando per la sottoscrizione a QRZ.com</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="158"/>
        <source>LogBook Key</source>
        <translation>Key LogBook</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="160"/>
        <source>LogBook Key for QSO uploading. You can get this key in your QRZ.com logbook webpage. Remember that you need a QRZ.com subscription to use this feature.</source>
        <translation>Key LogBook per il trasferimento di QSO. Ottieni questa key nella tua pagina web su QRZ.com. Ricorda che occorre che tu sia utente registrato su QRZ.com per pyoter usare questa funzionalità.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="174"/>
        <location filename="../setuppages/setuppageelog.cpp" line="175"/>
        <source>Select the default option for new QSOs in QRZ.com</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="201"/>
        <source>LoTW</source>
        <translation>LoTW</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="202"/>
        <source>Upload</source>
        <translation>upload</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="203"/>
        <source>Download</source>
        <translation>Dowload</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="214"/>
        <source>TQSL path</source>
        <translation>path TQSL</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="215"/>
        <source>Use TQSL</source>
        <translation>Usa TQSL</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="216"/>
        <source>LoTW password</source>
        <translation>password LoTW</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="217"/>
        <source>LoTW user</source>
        <translation>user LoTW</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="219"/>
        <source>Enter your LoTW user.</source>
        <translation>Inserisci il tuo utente LoTW.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="220"/>
        <source>Enter your password LoTW here. Warning: The password will be save on clear in the KLog config file!! (If you don&apos;t want to enter the password, KLog will ask you when it is needed.)</source>
        <translation>Inserisci qua la tua password per LoTW. Attenzione: La password sarà salvata in charo nel file di configurazione di KLog. Se non vuoi lasciarla esposta puoi evitare di inserirla e KLog te la chiederà ogni volta quando necessario, senza memorizzarla</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="221"/>
        <source>Path to the TQSL software.</source>
        <translation>Path del software TQSL.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="222"/>
        <source>Enable the LoTW integration with TQSL. You will need to have TQSL installed</source>
        <translation>Abilita l&apos;integrazione fra LoTW e TQSL. E&apos; necessario aver installato TQSL</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="224"/>
        <location filename="../setuppages/setuppageelog.cpp" line="225"/>
        <source>Select the default option for new QSOs in LoTW</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageelog.cpp" line="533"/>
        <source>Select File</source>
        <translation>Seleziona file</translation>
    </message>
</context>
<context>
    <name>SetupPageHamLib</name>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="158"/>
        <source>Activate HamLib</source>
        <translation>Attiva Hamlib</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="159"/>
        <source>Activates the hamlib support that will enable the connection to a radio.</source>
        <translation>Attiva il supporto hamlib che permette la conenssioen diretta alla radio.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="160"/>
        <source>Read-Only mode</source>
        <translation>Modo in sola lettura</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="161"/>
        <source>If enabled, the KLog will read Freq/Mode from the radio but will never send any command to the radio.</source>
        <translation>Se abilitato, KLog leggerà frequenza e modalità dalla radio ma senza trasmettere comando alla radio.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="187"/>
        <source>Radio</source>
        <translation>Radio</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="189"/>
        <source>Select your rig.</source>
        <translation>seleziona il tuo rig.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="204"/>
        <source>Serial</source>
        <translation>Seriale</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="205"/>
        <source>Network</source>
        <translation>Rete</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="167"/>
        <source>Defines the interval to poll the radio in msecs.</source>
        <translation>Imposta l&apos;intervallo di poll della radio in msecondi.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="175"/>
        <source>Poll interval</source>
        <translation>Intervallo di poll</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="95"/>
        <source>Test: OK</source>
        <translation>Test: OK</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="106"/>
        <source>Test: NOK</source>
        <translation>Test: NON OK</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="162"/>
        <source>Test</source>
        <translation>Test</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagehamlib.cpp" line="163"/>
        <source>Click to test the connection to the radio</source>
        <translation>Premi per verificare la connessione alla radio</translation>
    </message>
</context>
<context>
    <name>SetupPageLogView</name>
    <message>
        <location filename="../setuppages/setuppagelogview.cpp" line="43"/>
        <source>Fields</source>
        <translation>Campi</translation>
    </message>
</context>
<context>
    <name>SetupPageLogs</name>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="56"/>
        <source>&amp;New</source>
        <translation>&amp;Nuovo</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="57"/>
        <source>&amp;Edit</source>
        <translation>&amp;Modifica</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="58"/>
        <source>&amp;Remove</source>
        <translation>&amp;Elimina</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="149"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="151"/>
        <source>All the QSOs from this log will also be deleted...</source>
        <translation>Tutti i QSO di questo log saranno cancellati...</translation>
    </message>
    <message>
        <source>Log has not been removed. (#3)</source>
        <translation type="vanished">Impossibile cancellare l&apos;intero log. (#3)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="150"/>
        <source>Do you really want to remove this log?</source>
        <translation>Davvero vuoi eliminare questo log?</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="60"/>
        <source>Add a new log.</source>
        <translation>Crea nuovo log.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="61"/>
        <source>Edit the selected log.</source>
        <translation>Modifica il log selezionato.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="62"/>
        <source>Remove the selected log.</source>
        <translation>Calcella il log selezionato.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="170"/>
        <source>Log has not been removed. (#2)</source>
        <translation>Impossibile cancellare l&apos;intero log. (#2)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="177"/>
        <source>Log has not been removed. (#1)</source>
        <translation>Impossibile cancellare l&apos;intero log. (#1)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="233"/>
        <source>ID</source>
        <translation>ID</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="236"/>
        <source>Date</source>
        <translation>Data</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="239"/>
        <source>Station Callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="242"/>
        <source>Operators</source>
        <translation>Operatori</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="245"/>
        <source>Comments</source>
        <translation>Commenti</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="248"/>
        <source>QSOs</source>
        <translation>QSO</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="361"/>
        <source>The new log could not be created.</source>
        <translation>Il nuovo log potrebbe non essere creato.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="385"/>
        <source>An error has occurred showing the following error code:</source>
        <translation>Si è verificato un errore con il codice:</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogs.cpp" line="388"/>
        <source>KLog - SetupPageLogs</source>
        <translation>KLog - Maschera configurazione Log</translation>
    </message>
</context>
<context>
    <name>SetupPageLogsNew</name>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="55"/>
        <source>&amp;Date</source>
        <translation>&amp;Data</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="56"/>
        <source>&amp;Station Callsign</source>
        <translation>&amp;Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="57"/>
        <source>&amp;Operators</source>
        <translation>&amp;Operatori</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="58"/>
        <source>Comm&amp;ent</source>
        <translation>Comm&amp;enta</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="60"/>
        <source>&amp;Ok</source>
        <translation>&amp;Ok</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="61"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Annulla</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="101"/>
        <source>Add a comment about this log. If filled, it will be shown in the main KLog title to identify the log.</source>
        <translation>Inserisci una breve descrizione per questo log. Se lo inserisci, sarà mostrato sul titolo principale di KLog per distinguerlo.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="209"/>
        <source>You need to enter a valid callsign in the Station Callsign box.
The log will not be opened.</source>
        <translation>E&apos; necessario che tu inserisca un valido nominativo nel box Nominativo di stazione.
Il log non sarà aperto.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="97"/>
        <source>Callsign used for this log.</source>
        <translation>Nominativo usato per questo log.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="98"/>
        <source>Comma separated list of operators: callsign1, callsign2.</source>
        <translation>Elenco operatori separati da virgola: operatore, operatore2.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagelogsnew.cpp" line="100"/>
        <source>Start date of this log.</source>
        <translation>Data di inizio di questo log.</translation>
    </message>
</context>
<context>
    <name>SetupPageMisc</name>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="38"/>
        <source>&amp;Imperial system</source>
        <translation>Sistema &amp;Imperiale</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="39"/>
        <source>&amp;Log in real time</source>
        <translation>&amp;Log in tempo reale</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="41"/>
        <source>&amp;Time in UTC</source>
        <translation>&amp;Ora in UTC</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="42"/>
        <source>&amp;Save ADIF on exit</source>
        <translation>&amp;Salva ADIF all&apos;uscita</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="43"/>
        <source>Use this &amp;default filename</source>
        <translation>Usa di &amp;default questo nome file</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="44"/>
        <source>Mark &amp;QSO to send QSL when QSL is received</source>
        <translation>Segna il &amp;QSO per inviare QSL quando una QSL è ricevuta</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="45"/>
        <source>Complete QSO with previous data</source>
        <translation>Completa i dati del QSO con dati precedenti</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="46"/>
        <source>Show the Station &amp;Callsign used in the search box</source>
        <translation>Mostra il &amp;nominativo di stazione inserito nella maschera di ricerca</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="53"/>
        <source>Mark sent eQSL &amp;&amp; LoTW in new QSO as queued</source>
        <translation>Mette in coda nei nuovi QSO per la spedizione eQSL &amp;&amp; LoTW</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="48"/>
        <source>&amp;Check for new versions automatically</source>
        <translation>&amp;Controlla automaticamente nuove versioni</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="136"/>
        <source>Check if there is a new release of KLog available every time you start KLog.</source>
        <translation>Controlla se è diosponibile una nuova versione di KLog ogni volta che KLog si avvia.</translation>
    </message>
    <message>
        <source>&amp;Provide Info for statistics</source>
        <translation type="vanished">&amp;Fornisci informazioni per statistiche</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="63"/>
        <source>Move DB</source>
        <translation>Sposta DB</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="134"/>
        <source>The search box will also show the callsign on the air to do the QSO.</source>
        <translation>La maschera di ricerca mostrerà anche il nominativo usato in trasmissione durante il QSO.</translation>
    </message>
    <message>
        <source>If new version checking is selected, KLog will send the developer your callsign, KLog version and Operating system to help in improving KLog.</source>
        <translation type="vanished">Se la spunta sul checkbox di controllo di nuove versione è attiva, KLog trasmetterà algi sviluppatori il tuo nominativo la vesione di KLog, e dil sisstema operativo per aiutare lo sviluppo di nuove versioni di KLog.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="139"/>
        <source>Select to use real time.</source>
        <translation>Seleziona per il funzionamento in tempo reale.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="140"/>
        <source>Select to use UTC time.</source>
        <translation>Seleziona per usare l&apos;ora UTC.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="141"/>
        <source>Select if you want to save to ADIF on exit.</source>
        <translation>Seleziona se vuoi salvare su file ADIF ad ogni uscita.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="143"/>
        <source>Complete the current QSO with previous QSO data.</source>
        <translation>Completa il QSO corrente ripescando i dati dal precedente QSO.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="152"/>
        <source>Click to mark as Queued (to be sent) all the eQSL (LoTW and eQSL) in all the new QSO by default.</source>
        <translation>Clicca se vuoi che di default ad ogni nuovo QSO le eQSL (LoTW e eQSL) siano automaticamente messe in coda per la spedizione.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="499"/>
        <source>This is the directory where DB (logbook.dat) will be saved.</source>
        <translation>Cartella di salvataggio del DB (logbook.dat).</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="147"/>
        <source>Click to change the default ADIF file.</source>
        <translation>Clicca per cambiare il file ADIF di default.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="40"/>
        <source>Show seconds</source>
        <translation>Mostra secondi</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="106"/>
        <source>Show seconds in the QSO editor</source>
        <translation>Mostra secondi nell&apos;editor QSO</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="149"/>
        <source>Click to move the DB to the new directory.</source>
        <translation>Clicca per spostare il DB su una nuova cartella.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="150"/>
        <source>Select the application debug log level. This may be useful if something is not working as expected. A debug file will be created in the KLog directory and/or shown with Help-&gt;Debug menu.</source>
        <translation>Seleziona il debug level dell&apos;applicazione. Potrebbe essere utile se qualcosa non dovesse funzionare come previsto. Un file di debug sarà creato nella cartella di KLog e/o mostrato su Help-&gt;Debug menu.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="168"/>
        <source>Log level</source>
        <translation>Livello Log</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="469"/>
        <source>Select Directory</source>
        <translation>Scegli la cartella</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="526"/>
        <source>KLog - Move DB</source>
        <translation>KLog - Sposta DB</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="542"/>
        <source>File moved</source>
        <translation>File spostato</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="551"/>
        <source>File copied</source>
        <translation>File copiato</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="569"/>
        <source>File already exist.</source>
        <translation>Il file esiste già.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="570"/>
        <source>The destination file already exist and KLog will not replace it. Please remove the file from the destination folder before moving the file with KLog to make sure KLog can copy the file.</source>
        <translation>Il file di destinazione già esiste e KLog non lo sovrascriverà. Per favore rimuovi il file dalal cartella di destinazione prima di tentare di spostare il file con KLog se vuoi essere sicuro che la procedura abbia successo.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="575"/>
        <source>File NOT copied</source>
        <translation>File NON copiato</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="576"/>
        <source>The file was not copied due to an unknown problem.</source>
        <translation>Impossibile coopiare il file per problemi sconosciuti.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="587"/>
        <source>The target directory does not exist. Please select an existing directory.</source>
        <translation>La cartella di destinazione non esiste. Per favore scegli una cartella esistente.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="61"/>
        <location filename="../setuppages/setuppagemisc.cpp" line="62"/>
        <source>Browse</source>
        <translation>Sfoglia</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="37"/>
        <source>Check non-valid calls</source>
        <translation>Controllo nominativi non validi</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="50"/>
        <source>Manage DX-Marathon</source>
        <translation>Gestisci DX Marathon</translation>
    </message>
    <message>
        <source>Activate the application debug log</source>
        <translation type="vanished">Attiva il log debug dell&apos;applicazione</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="54"/>
        <source>&amp;Delete always temp ADIF file after uploading QSOs</source>
        <translation>&amp;Cancella sempre il file temporaneo ADIF dopo il trasferimento dei QSO</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="89"/>
        <source>In seconds, enter the time range to consider a duplicate if same call, band and mode is entered.</source>
        <translation>In secondi, scegli il tempo limite per considerare una chiamata come duplicata, se anche banda e modo sono presenti.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="132"/>
        <source>If you disable this checkbox KLog will not check callsigns to identify wrong callsigns.</source>
        <translation>Se disattivi la spunta di questa opzione KLog non controllerà i nomiantivi sbagliati.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="133"/>
        <source>QSOs will be marked as pending to send a QSL if you receive the DX QSL and have not sent yours.</source>
        <translation>QSO marcato come in attesa di spedizione QSL se hai già ricevuto la QSL del DX ma non ne hai ancora inviata una.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="138"/>
        <source>Check it for Imperial system (Miles instead of Kilometers).</source>
        <translation>Seleziona per attivare il sistema di misure Imperiale (Miglia invece di Kilometri).</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="142"/>
        <source>Select to use the following name for the logfile without being asked for it again.</source>
        <translation>Scegli il nome del file di log (non ti verrà più chiesto).</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="144"/>
        <source>Select if you want to manage DX-Marathon.</source>
        <translation>Seleziona se vuoi gestire la DX Marathon.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="145"/>
        <source>This is the default file where ADIF data will be saved.</source>
        <translation>File ADIF di default di salvataggio dei dati.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="146"/>
        <source>This is the directory where the database (logbook.dat) will be saved.</source>
        <translation>Cartella di salvataggio del database (logbook.dat).</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="148"/>
        <source>Click to change the path of the database.</source>
        <translation>Clicca per cambiare il percorso del database.</translation>
    </message>
    <message>
        <source>Activates the application debug log. This may be useful if something is not working as expected. A debug file will be created in the KLog directory.</source>
        <translation type="vanished">Attiva il log di debug dell&apos;applicazione. Questo purò rivelarsi utile se qualcosa dovesse non andare come previsto. Il file di debug è creato nella cartella dati di KLog.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="153"/>
        <source>Delete Always the adif file created after uploading QSOs</source>
        <translation>Cancella sempre il file ADIF creato dopo in trasferimento dei QSO</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="174"/>
        <source>Dupe time range:</source>
        <translation>Tempo limite duplicato:</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="309"/>
        <source>Open File</source>
        <translation>Apre File</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagemisc.cpp" line="505"/>
        <source>Please specify an existing directory where the database (logbook.dat) will be saved.</source>
        <translation>Per favore indica una cartella valida per il salvataggio del database (logbook.dat).</translation>
    </message>
</context>
<context>
    <name>SetupPageSats</name>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="64"/>
        <source>&amp;New</source>
        <translation>&amp;Nuovo</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="65"/>
        <source>&amp;Edit</source>
        <translation>&amp;Modifica</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="66"/>
        <source>&amp;Remove</source>
        <translation>&amp;Elimina</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="67"/>
        <source>&amp;Import</source>
        <translation>&amp;Importa</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="68"/>
        <source>E&amp;xport</source>
        <translation>E&amp;sporta</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="70"/>
        <source>Add a new satellite.</source>
        <translation>Aggiunge un nuovo satellite.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="71"/>
        <source>Edit the selected satellite.</source>
        <translation>Modifica il satellite selezionato.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="72"/>
        <source>Remove the selected satellite.</source>
        <translation>Elimina il satellite selezionato.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="74"/>
        <source>Export your current satellites to a file.</source>
        <translation>Esporta i tuoi satelliti attuali su file.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="76"/>
        <source>Select the sat you want to open.</source>
        <translation>Seleziona il sat da aprire.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="205"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="206"/>
        <source>Do you really want to remove this satellite?</source>
        <translation>Davvero vuoi eliminare questo satellite?</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="73"/>
        <source>Import a satellites file. It will replace the satellites you have in the current list.</source>
        <translation>Imposta file di satelliti. Questi sostituiranno i satelliti del tuo elenco corrente.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="207"/>
        <source>This satellite will no be longer available to be selected ...</source>
        <translation>Questo satellite non apparirà più nell&apos;elenco dei satelliti selezionabili...</translation>
    </message>
    <message>
        <source>Sat has not been removed. (#3)</source>
        <translation type="vanished">Sat non è stato rimosso. (#3)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="225"/>
        <source>Sat has not been removed. (#2)</source>
        <translation>Sat non è stato rimosso. (#2)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="232"/>
        <source>Sat has not been removed. (#1)</source>
        <translation>Sat non è stato rimosso. (#1)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="288"/>
        <source>ID</source>
        <translation>ID</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="291"/>
        <source>Short</source>
        <translation>Breve</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="294"/>
        <source>Name</source>
        <translation>Nome</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="297"/>
        <source>Uplink</source>
        <translation>Uplink (uscita)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="300"/>
        <source>Downlink</source>
        <translation>Downlink (ingresso)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="303"/>
        <source>Modes</source>
        <translation>Modalità</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="513"/>
        <source>An error has occurred showing the following error code:</source>
        <translation>Si è verificato un errore con il codice:</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="516"/>
        <source>KLog - SetupPageSats</source>
        <translation>KLog - SetupPageSats</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="524"/>
        <source>Open Satellites File</source>
        <translation>Apre file satelliti</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="542"/>
        <source>KLog warning</source>
        <translation>KLog warning</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="544"/>
        <source>An unexpected error ocurred while importing the satellite data.

It may be caused because the file you are trying to import does not have the right format.</source>
        <translation>Impossibile importare i dati satellite a causa di un errore inaspettato.

Il file che stai cercando di importare potrebbe non essere nel corretto formato.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="547"/>
        <source>Please check the format or contact the developer for analysis with the error code: </source>
        <translation>Per favore controlla il formato o contatta gli sviluppatori per analisi con il seguente codice di errore: </translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesats.cpp" line="609"/>
        <source>Save Satellites File</source>
        <translation>Salva file satelliti</translation>
    </message>
</context>
<context>
    <name>SetupPageSatsNew</name>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="48"/>
        <source>Short name</source>
        <translation>Nome breve</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="49"/>
        <source>Sat name</source>
        <translation>Nome satellite</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="50"/>
        <source>UpLink</source>
        <translation>Uplink</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="51"/>
        <source>DownLink</source>
        <translation>Downlink</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="52"/>
        <source>Modes</source>
        <translation>Modi</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="58"/>
        <source>&amp;Ok</source>
        <translation>&amp;Ok</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="59"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Annulla</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="110"/>
        <source>Enter the short name. Try to use the LoTW short name so you can upload your QSO to LoTW afterwards.</source>
        <translation>Inserisci il nome breve. Prova ad usare il nome breve LoTW in modo da trasferire i tuoi QSO a afterwards LoTW.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="111"/>
        <source>Enter the name of the satellite.</source>
        <translation>Inserici il nome del satellite.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="112"/>
        <source>Enter the uplink frequencies in this format: 144.300</source>
        <translation>Inserisci la frequenza di uplink nel formato: 144.300</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="113"/>
        <source>Enter the downlink frequencies in this format: 144.300</source>
        <translation>Inserisci la frequenza di downlink nel formato: 144.300</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="114"/>
        <source>Enter the modes in this format: USB</source>
        <translation>Inserisci i modi in questo formato: USB</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesatsnew.cpp" line="377"/>
        <source>Some of the data you have entered is not correct; the satellite can&apos;t be added.</source>
        <translation>Il satellite non può essere aggiunto perché qualche dato inserito non è corretto.</translation>
    </message>
</context>
<context>
    <name>SetupPageSubdivisionNew</name>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="65"/>
        <source>&amp;Date</source>
        <translation>&amp;Data</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="66"/>
        <source>&amp;Station Callsign</source>
        <translation>&amp;Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="67"/>
        <source>&amp;Operators</source>
        <translation>&amp;Operatori</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="68"/>
        <source>Comm&amp;ent</source>
        <translation>Comm&amp;ento</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="70"/>
        <source>&amp;Ok</source>
        <translation>&amp;Ok</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="71"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Annulla</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="135"/>
        <source>Callsign used for this log.</source>
        <translation>Nominativo usato per questo log.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="136"/>
        <source>Comma separated list of operators: callsign1, callsign2.</source>
        <translation>Elenco operatori separati da virgola: operatore1, operatore2.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="138"/>
        <source>Start date of this log.</source>
        <translation>Data di inizio di questo log.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="139"/>
        <source>Add a comment about this log. If filled, it will be shown in the main KLog title to identify the log.</source>
        <translation>Inserisci una breve descrizione per questo log. Se lo inserisci, sarà mostrato sul titolo principale di KLog per maggior chiarezza.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisionnew.cpp" line="552"/>
        <source>You need to enter a valid callsign in the Station Callsign box.
The log will not be opened.</source>
        <translation>E&apos; necessario che tu inserisca un nominativo valido nel box del nominativo di stazione.
Il log non sarà aperto.</translation>
    </message>
</context>
<context>
    <name>SetupPageSubdivisions</name>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="56"/>
        <source>&amp;Remove</source>
        <translation>&amp;Elimina</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="57"/>
        <source>Import new</source>
        <translation>Importa nuovo</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="58"/>
        <source>Import an AWA file with the subdivision details.</source>
        <translation>Importa file AWA con tutti i dettagli.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="61"/>
        <source>Remove the selected references.</source>
        <translation>Cancella i riferimenti selezionati.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="63"/>
        <source>Select the references you want to open.</source>
        <translation>Scegli i riferimenti che vuoi aprire.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="124"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="125"/>
        <source>Do you really want to remove the data of this entity?</source>
        <translation>Davvero vuoi cancellare la data di questo elemento?</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="126"/>
        <source>All the subdivision information for this entity will be deleted...</source>
        <translation>Tutte le informazioni per questo elemento saranno cancellati...</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="154"/>
        <source>Log has not been removed. (#3)</source>
        <translation>Log non cancellato. (#3)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="159"/>
        <source>Log has not been removed. (#2)</source>
        <translation>Log non cancellato. (#2)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="166"/>
        <source>Log has not been removed. (#1)</source>
        <translation>Log non cancellato. (#1)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="214"/>
        <source>ID</source>
        <translation>ID</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="217"/>
        <source>Name</source>
        <translation>Nome</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="220"/>
        <source>Short Name</source>
        <translation>Nome abbreviato</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="223"/>
        <source>CQ Zone</source>
        <translation>Zona CQ</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="226"/>
        <source>ITU Zone</source>
        <translation>Zona ITU</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="229"/>
        <source>Deleted</source>
        <translation>Cancellato</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="232"/>
        <source>Start Date</source>
        <translation>Data di inizio</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="235"/>
        <source>End Date</source>
        <translation>Data di fine</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="238"/>
        <source>DXCC</source>
        <translation>DXCC</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="365"/>
        <source>An error has occurred showing the following error code:</source>
        <translation>Si è verificato un errore con il seguente codice:</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppagesubdivisions.cpp" line="368"/>
        <source>KLog - SetupPageSubdivisions</source>
        <translation>KLog - SetuoPageSubdivisions</translation>
    </message>
</context>
<context>
    <name>SetupPageUDP</name>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="36"/>
        <source>Start UDP Server</source>
        <translation>Avvia server UDP</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="63"/>
        <source>Automatically log QSOs from WSJT-X</source>
        <translation>Automaticamente log i QSO da WSJT-X</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="64"/>
        <source>Allow WSJT-X to send logged QSOs to KLog</source>
        <translation>Permette a WSJT-X di spedire i QSO logged a KLog</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="65"/>
        <source>QSOs logged in WSJT-X will be sent to KLog and KLog will ask before logging into KLog unless &quot;%1&quot; is selected</source>
        <translation>I QSO logged su WSJT-X saranno spediti a KLog e KLog chiederà conferma prima di logging into KLog a meno che &quot;%1&quot; sia selezionato</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="68"/>
        <source>KLog will automatically log any QSO coming from WSJT-X without any manual confirmation.</source>
        <translation>KLog automaticamente log ogni QSO in arrivo da WSJT-X senza ulteriori conferme manuali.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="71"/>
        <source>Update status information from WSJT-X</source>
        <translation>Aggiornamento informazione di stato da WSJT-X</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="72"/>
        <source>KLog will automatically show and update data coming from WSJT-X (DX callsign, Report, mode, ...)</source>
        <translation>KLog automaticamente mosterò ed aggiornerà i dati provenienti da WSJT-X (DX, nominativo, report, modo, ...)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="88"/>
        <source>UDP port number where the UDP Server will listen for packets.</source>
        <translation>Numero di porta UDP dove il server ascolta per ricevere pacchetti.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="88"/>
        <source>Make sure it is the same port that the other programs are sending the data to. Default port is 2237.</source>
        <translation>Verifica bene che la porta usata sia esattamente quella usata da altri programmi per trasmettere i dati. La porta di default è la 2237.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="89"/>
        <source>UDP Server will receive QSOs sent from other programs like WSJT-X allowing you to log in KLog automatically from those programs.</source>
        <translation>Il server UDP riceve QSO trasmessi da altri programmi come WSJT-X permettendoti di avere accesso da Klog ai dati di questi programmi.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="96"/>
        <source>UDP Port</source>
        <translation>Porta UDP</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="106"/>
        <location filename="../setuppages/setuppageudp.cpp" line="108"/>
        <source>Select the interface to listen for UDP datagrams coming from WSJT-X.</source>
        <translation>Seleziona l&apos;interfaccia per ascoltare UDP datagrammi provenienti da SWJT-X.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="107"/>
        <source>Network interface</source>
        <translation>Interfaccia di rete</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="116"/>
        <source>QSOs notification timeout (milisecs)</source>
        <translation>Tempo di timeout di notifica QSO (millisecondi)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageudp.cpp" line="117"/>
        <source>Miliseconds that the notification of QSOs received from WSJTX will be shown.</source>
        <translation>Millisecondi per la notifica di QSO ricevuti da WSJTX per essere mostrati.</translation>
    </message>
</context>
<context>
    <name>SetupPageUserDataPage</name>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="43"/>
        <source>&amp;Personal data</source>
        <translation>Dati &amp;Personali</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="44"/>
        <source>Station &amp;data</source>
        <translation>&amp;Data Stazione</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="69"/>
        <source>Enter your name.</source>
        <translation>Inserisci il tuo nome.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="70"/>
        <source>Enter your address - 1st line.</source>
        <translation>Inserisci il tuo indirizzo - 1a linea.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="71"/>
        <source>Enter your address - 2nd line.</source>
        <translation>Inserisci il tuo indirizzo - 2a linea.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="72"/>
        <source>Enter your address - 3rd line.</source>
        <translation>Inserisci il tuo indirizzo - 3a linea.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="73"/>
        <source>Enter your address - 4th line.</source>
        <translation>Inserisci il tuo indirizzo - 4a linea.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="74"/>
        <source>Enter your city.</source>
        <translation>Inserisci la tua città.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="75"/>
        <source>Enter your zip code.</source>
        <translation>Inserisci il tuo codice postale.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="76"/>
        <source>Enter your province or state.</source>
        <translation>Inserisci la tua provincia o stato.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="77"/>
        <source>Enter your country.</source>
        <translation>Inserisci il tuo paese.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="79"/>
        <source>&amp;Name</source>
        <translation>&amp;Nome</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="80"/>
        <source>&amp;Address</source>
        <translation>&amp;Indirizzo</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="81"/>
        <source>Cit&amp;y</source>
        <translation>Cit&amp;tà</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="82"/>
        <source>&amp;Zip Code</source>
        <translation>&amp;Cap</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="83"/>
        <source>Pro&amp;v/State</source>
        <translation>Pro&amp;v/Stato</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="84"/>
        <source>Countr&amp;y</source>
        <translation>Countr&amp;y</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="130"/>
        <location filename="../setuppages/setuppageuserdata.cpp" line="131"/>
        <location filename="../setuppages/setuppageuserdata.cpp" line="132"/>
        <source>Enter your information for rig</source>
        <translation>Inserisci informazioni per l&apos;impianto</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="133"/>
        <location filename="../setuppages/setuppageuserdata.cpp" line="134"/>
        <location filename="../setuppages/setuppageuserdata.cpp" line="135"/>
        <source>Enter your information for antenna</source>
        <translation>Inserisci informazioni sulla tua antenna</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="136"/>
        <source>Enter your power information.</source>
        <translation>Inserisci informazioni sulla tua potenza usata.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="177"/>
        <source>Enter the station callsign that will be used for logging.</source>
        <translation>Inserisci il nominativo di stazione che sarà usato per il log.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="179"/>
        <source>Enter the locator of your station. Alternatively, KLog can use an approximate locator based on your callsign.</source>
        <translation>Inserisci il locator della tua stazione. In alternativa, KLog è in grado di usare un locator approssimativo ricavato dal tuo nominativo.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="138"/>
        <source>&amp;Rig 1</source>
        <translation>&amp;Impianto 1</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="139"/>
        <source>R&amp;ig 2</source>
        <translation>&amp;Impianto 1</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="140"/>
        <source>Ri&amp;g 3</source>
        <translation>&amp;Impianto 1</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="141"/>
        <source>Antenna &amp;1</source>
        <translation>Antenna &amp;1</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="142"/>
        <source>Antenna &amp;2</source>
        <translation>Antenna &amp;2</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="143"/>
        <source>Antenna &amp;3</source>
        <translation>Antenna &amp;3</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="144"/>
        <source>Po&amp;wer</source>
        <translation>Po&amp;tenza</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="178"/>
        <source>Enter the operators (comma separated if more than one).</source>
        <translation>Inserisci gli operatori (separati da virgola se più di uno).</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="181"/>
        <source>&amp;Callsign</source>
        <translation>&amp;Nominativo</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="182"/>
        <source>&amp;Operators</source>
        <translation>&amp;Operatori</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="183"/>
        <source>&amp;CQ Zone</source>
        <translation>Zona &amp;CQ</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="184"/>
        <source>&amp;ITU Zone</source>
        <translation>Zona &amp;ITU</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="185"/>
        <location filename="../setuppages/setuppageuserdata.cpp" line="374"/>
        <source>&amp;Locator</source>
        <translation>&amp;Locator</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageuserdata.cpp" line="370"/>
        <source>&amp;Locator (not valid)</source>
        <translation>&amp;Locator (non valido)</translation>
    </message>
</context>
<context>
    <name>SetupPageWorldEditor</name>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="60"/>
        <source>Add</source>
        <translation>Aggiunge</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="61"/>
        <source>Delete</source>
        <translation>Cancella</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="62"/>
        <source>Edit</source>
        <translation>Modifica</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="65"/>
        <source>Export World</source>
        <translation>Esporta Mondo</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="66"/>
        <source>Import World</source>
        <translation>IMporta mondo</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="72"/>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="73"/>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="74"/>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="78"/>
        <source>Still not implemented.</source>
        <translation>Ancora non implementato.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="79"/>
        <source>Import a new cty.csv file</source>
        <translation>Importa un nuovo file cty.csv</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="109"/>
        <source>An entities information file (cty.csv) has been detected in your KLog folder and will be loaded.</source>
        <translation>Un file elenco (cty.csv) è stato trovato nella cartella dati di KLog e sarà caricato.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="122"/>
        <source>No entities information file (cty.csv) has been detected in your KLog folder.</source>
        <translation>Nessun file elenco (cty.csv) è stato trovato nella cartella dati di KLog.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="123"/>
        <source>KLog will not be able to show entities information.</source>
        <translation>KLog non sarà in grado di mostrare le informazioni di collegamento.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="208"/>
        <source>Prefix</source>
        <translation>Prefisso</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="210"/>
        <source>Entity</source>
        <translation>Collegamento</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="212"/>
        <source>ARRL ID</source>
        <translation>ARRL ID</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="214"/>
        <source>Continent</source>
        <translation>Continente</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="216"/>
        <source>CQ Zone</source>
        <translation>Zona CQ</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="218"/>
        <source>ITU Zone</source>
        <translation>Zona ITU</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="220"/>
        <source>UTC</source>
        <translation>UTC</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="222"/>
        <source>Latitude</source>
        <translation>Latidudine</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="224"/>
        <source>Longitude</source>
        <translation>Longitudine</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="227"/>
        <source>Deleted</source>
        <translation>Eliminato</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="230"/>
        <source>Since Date</source>
        <translation>Dalla data</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="232"/>
        <source>To Date</source>
        <translation>Alla data</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="328"/>
        <source>Open File</source>
        <translation>Apre File</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="328"/>
        <source>BigCTY (*.csv)</source>
        <translation>BigCTY (*.csv)</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="336"/>
        <source>Entities information has been updated.</source>
        <translation>Informazioni collegamento aggiornate.</translation>
    </message>
    <message>
        <location filename="../setuppages/setuppageworldeditor.cpp" line="342"/>
        <source>Entities information has not been updated.</source>
        <translation>Informazioni collegamento non aggiornate.</translation>
    </message>
</context>
<context>
    <name>ShowAdifImportWidget</name>
    <message>
        <location filename="../widgets/showadifimportwidget.cpp" line="55"/>
        <source>The following QSOs are those QSOs that you have received the LoTW confirmation.</source>
        <translation>I seguenti QSO sono tutti quelli ricevuti dalla conferma LoTW.</translation>
    </message>
    <message>
        <location filename="../widgets/showadifimportwidget.cpp" line="56"/>
        <source>Ok</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location filename="../widgets/showadifimportwidget.cpp" line="66"/>
        <source>DX</source>
        <translation>DX</translation>
    </message>
    <message>
        <location filename="../widgets/showadifimportwidget.cpp" line="66"/>
        <source>Date/Time</source>
        <translation>Data/Ora</translation>
    </message>
    <message>
        <location filename="../widgets/showadifimportwidget.cpp" line="66"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../widgets/showadifimportwidget.cpp" line="66"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
</context>
<context>
    <name>ShowErrorDialog</name>
    <message>
        <location filename="../showerrordialog.cpp" line="33"/>
        <source>KLog Message</source>
        <translation>Messaggio KLog</translation>
    </message>
</context>
<context>
    <name>SoftwareUpdateDialog</name>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="42"/>
        <source>Ok</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="56"/>
        <source>KLog update</source>
        <translation>Aggiornamento KLog</translation>
    </message>
    <message>
        <source>&lt;center&gt;&lt;h2&gt;KLog new version (%1) is available! &lt;/h2&gt;&lt;/center&gt;&lt;br&gt;There is a new version of KLog available.&lt;br&gt;&lt;br&gt;&lt;b&gt;You can get the new version from:&lt;br&gt;&lt;br&gt;&lt;center&gt;&lt;a href=https://www.klog.xyz&gt;https://www.klog.xyz&lt;/a&gt;&lt;/center&gt;</source>
        <translation type="vanished">&lt;center&gt;&lt;h2&gt;KLog nuova versione (%1) è disponibile! &lt;/h2&gt;&lt;/center&gt;&lt;br&gt;E&apos; disponibile una nuova versione di KLog.&lt;br&gt;&lt;br&gt;&lt;b&gt;Puoi scaricare la nuova versione da:&lt;br&gt;&lt;br&gt;&lt;center&gt;&lt;a href=https://www.klog.xyz&gt;https://www.klog.xyz&lt;/a&gt;&lt;/center&gt;</translation>
    </message>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="69"/>
        <source>&lt;center&gt;&lt;h2&gt;KLog new version (%1) is available! &lt;/h2&gt;&lt;/center&gt;&lt;br&gt;There is a new version of KLog available.&lt;br&gt;&lt;br&gt;&lt;b&gt;You can get the new version from:&lt;br&gt;&lt;br&gt;&lt;center&gt;&lt;a href=https://github.com/ea4k/klog&gt;https://github.com/ea4k/klog&lt;/a&gt;&lt;/center&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="73"/>
        <source>Congratulations!</source>
        <translation>congratulazioni!</translation>
    </message>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="73"/>
        <source>Your KLog has been updated.</source>
        <translation>KLog è stato aggiornato.</translation>
    </message>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="73"/>
        <source>You already have the latest version.</source>
        <translation>Stai già usando la versione più recente.</translation>
    </message>
</context>
<context>
    <name>StartWizard</name>
    <message>
        <location filename="../startwizard.cpp" line="68"/>
        <source>KLog - The free hamradio logging program</source>
        <translation>KLog.- Un software libero per radioamatori</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="93"/>
        <source>Quit Setup</source>
        <translation>Esce dalla configurazione</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="93"/>
        <source>Setup is not complete yet. Are you sure you want to quit setup?</source>
        <translation>Configurazione non ancora completa. Sei sicuro di voler uscire dalla configurazione?</translation>
    </message>
</context>
<context>
    <name>StatisticsWidget</name>
    <message>
        <location filename="../statisticswidget.cpp" line="264"/>
        <source>QSO per year</source>
        <translation>QSO all&apos;anno</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="265"/>
        <source>DXCC per year</source>
        <translation>DXCC all&apos;anno</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="266"/>
        <source>CQ zones per year</source>
        <translation>Zone CQ all&apos;anno</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="267"/>
        <source>QSO per band</source>
        <translation>QSO per banda</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="268"/>
        <source>QSO per mode</source>
        <translation>QSO per modo</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="269"/>
        <source>QSO per DXCC</source>
        <translation>QSO per DXCC</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="270"/>
        <source>QSO per Continent</source>
        <translation>QSO per Continente</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="271"/>
        <source>QSO per hour</source>
        <translation>QSO all&apos;ora</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="272"/>
        <source>QSO per month</source>
        <translation>QSO al mese</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="273"/>
        <source>Worked / Confirmed status</source>
        <translation>Stato Processati / Confermati</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="274"/>
        <source>Worked / Sent status</source>
        <translation>Stato Processati / Spediti</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="275"/>
        <source>Sent / Confirmed status</source>
        <translation>Stato Spediti / Confermati</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="276"/>
        <source>Satellite grid status</source>
        <translatorcomment>Stato DXCC satellite</translatorcomment>
        <translation>Stato griglia satellite</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="277"/>
        <source>Satellite DXCC status</source>
        <translation>Satellite DXCC status</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="278"/>
        <source>Grids per band status</source>
        <translation>Grids per stato banda</translation>
    </message>
    <message>
        <location filename="../statisticswidget.cpp" line="279"/>
        <source>DXCC per band status</source>
        <translation>DXCC per stato banda</translation>
    </message>
</context>
<context>
    <name>StatsCQZPerYearBarChartWidget</name>
    <message>
        <location filename="../charts/statscqzperyearbarchartwidget.cpp" line="75"/>
        <source>CQ Zones per year</source>
        <translation>Zone CQ per anno</translation>
    </message>
    <message>
        <location filename="../charts/statscqzperyearbarchartwidget.cpp" line="79"/>
        <source>Reading data ... </source>
        <translation>Dati in lettura... </translation>
    </message>
    <message>
        <location filename="../charts/statscqzperyearbarchartwidget.cpp" line="79"/>
        <source>Abort reading</source>
        <translation>Cancellazione lettura</translation>
    </message>
    <message>
        <location filename="../charts/statscqzperyearbarchartwidget.cpp" line="84"/>
        <source>CQ zones</source>
        <translation>Zone CQ</translation>
    </message>
    <message>
        <location filename="../charts/statscqzperyearbarchartwidget.cpp" line="85"/>
        <source>CQ zones per year</source>
        <translatorcomment>Zone CQ Per anno
</translatorcomment>
        <translation>Zone CQ per anno</translation>
    </message>
    <message>
        <location filename="../charts/statscqzperyearbarchartwidget.cpp" line="97"/>
        <source>Reading data ...</source>
        <translation>Lettura dati ...</translation>
    </message>
    <message>
        <location filename="../charts/statscqzperyearbarchartwidget.cpp" line="97"/>
        <source>Years: %1/%2</source>
        <translation>Anni:%1/%2</translation>
    </message>
</context>
<context>
    <name>StatsDXCCOnSatsWidget</name>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="56"/>
        <source>Show confirmed only</source>
        <translation>Mostra solo i confermati</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="58"/>
        <source>Only LEO sats</source>
        <comment>LEO means Low Earth Orbiting and it is a well known word for hams. Do not translate if not sure.</comment>
        <translation>Only LEO sats</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="74"/>
        <source>Number</source>
        <translation>Numero</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="115"/>
        <source>Callsign</source>
        <translation>Nominativo</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="116"/>
        <source>Date</source>
        <translation>Data</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="117"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="118"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="119"/>
        <source>DXCC</source>
        <translation>DXCC</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="120"/>
        <source>Satellite</source>
        <translation>Satellite</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="121"/>
        <source>Confirmed</source>
        <translation>Confermato</translation>
    </message>
    <message>
        <location filename="../charts/statsdxccsonsatswidget.cpp" line="150"/>
        <source>No</source>
        <translation>No</translation>
    </message>
</context>
<context>
    <name>StatsEntitiesPerYearBarChartWidget</name>
    <message>
        <location filename="../charts/statsentitiesperyearbarchartwidget.cpp" line="81"/>
        <source>Chart title</source>
        <translation>Titolo della carta</translation>
    </message>
    <message>
        <location filename="../charts/statsentitiesperyearbarchartwidget.cpp" line="85"/>
        <source>Reading data ... </source>
        <translation>Lettura dati ... </translation>
    </message>
    <message>
        <location filename="../charts/statsentitiesperyearbarchartwidget.cpp" line="85"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../charts/statsentitiesperyearbarchartwidget.cpp" line="76"/>
        <location filename="../charts/statsentitiesperyearbarchartwidget.cpp" line="77"/>
        <source>DXCC Entities</source>
        <translation>Collegamenti DXCC</translation>
    </message>
    <message>
        <source>DXCC Entities per year</source>
        <translation type="vanished">Collegamenti DXCC all&apos;anno</translation>
    </message>
    <message>
        <location filename="../charts/statsentitiesperyearbarchartwidget.cpp" line="101"/>
        <source>Reading data ...</source>
        <translation>Lettura dati ...</translation>
    </message>
    <message>
        <location filename="../charts/statsentitiesperyearbarchartwidget.cpp" line="101"/>
        <source>Entities: </source>
        <translation>Collegamenti: </translation>
    </message>
</context>
<context>
    <name>StatsFieldPerBandWidget</name>
    <message>
        <location filename="../charts/statsfieldperbandwidget.cpp" line="51"/>
        <location filename="../charts/statsfieldperbandwidget.cpp" line="119"/>
        <source>All</source>
        <translation>Tutto</translation>
    </message>
    <message>
        <location filename="../charts/statsfieldperbandwidget.cpp" line="67"/>
        <source>Mode: </source>
        <translation>Modo: </translation>
    </message>
    <message>
        <location filename="../charts/statsfieldperbandwidget.cpp" line="93"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../charts/statsfieldperbandwidget.cpp" line="94"/>
        <source>Worked</source>
        <translation>Processato</translation>
    </message>
    <message>
        <location filename="../charts/statsfieldperbandwidget.cpp" line="95"/>
        <source>Confirmed</source>
        <translation>Confermato</translation>
    </message>
</context>
<context>
    <name>StatsGridsOnSatsWidget</name>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="56"/>
        <source>Show confirmed only</source>
        <translation>Mostra solo i confermati</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="58"/>
        <source>Only LEO sats</source>
        <comment>LEO means Low Earth Orbiting and it is a well known word for hams. Do not translate if not sure.</comment>
        <translation>Only LEO sats</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="71"/>
        <source>Number</source>
        <translation>Numero</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="107"/>
        <source>Callsign</source>
        <translation>Nominativo</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="108"/>
        <source>Date</source>
        <translation>Data</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="109"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="110"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="111"/>
        <source>Grid</source>
        <translation>Griglia</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="112"/>
        <source>Satellite</source>
        <translation>Satellite</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="113"/>
        <source>Confirmed</source>
        <translation>Confermato</translation>
    </message>
    <message>
        <location filename="../charts/statsgridsonsatswidget.cpp" line="141"/>
        <source>No</source>
        <translation>No</translation>
    </message>
</context>
<context>
    <name>StatsQSOsPerBandBarChartWidget</name>
    <message>
        <location filename="../charts/statsqsosperbandbarchartwidget.cpp" line="74"/>
        <source>QSOs per band</source>
        <translation>QSO per banda</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperbandbarchartwidget.cpp" line="78"/>
        <source>Reading data ... </source>
        <translation>lettura dati ... </translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperbandbarchartwidget.cpp" line="78"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperbandbarchartwidget.cpp" line="83"/>
        <source>Bands</source>
        <translation>Bande</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperbandbarchartwidget.cpp" line="84"/>
        <source>QSOs per band distribution</source>
        <translation>Distribuzione QSO per banda</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperbandbarchartwidget.cpp" line="94"/>
        <source>Reading data ...</source>
        <translation>lettura dati ...</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperbandbarchartwidget.cpp" line="94"/>
        <source>Bands: </source>
        <translation>Bande: </translation>
    </message>
</context>
<context>
    <name>StatsQSOsPerContinentBarChartWidget</name>
    <message>
        <location filename="../charts/statsqsospercontinentbarchartwidget.cpp" line="75"/>
        <location filename="../charts/statsqsospercontinentbarchartwidget.cpp" line="89"/>
        <source>QSOs per continent</source>
        <translation>QSO per continente</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospercontinentbarchartwidget.cpp" line="79"/>
        <source>Reading data ... </source>
        <translation>Lettura dati ... </translation>
    </message>
    <message>
        <location filename="../charts/statsqsospercontinentbarchartwidget.cpp" line="79"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospercontinentbarchartwidget.cpp" line="88"/>
        <source>Continents</source>
        <translation>Continenti</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospercontinentbarchartwidget.cpp" line="98"/>
        <source>Reading data ...</source>
        <translation>Lettura dati ...</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospercontinentbarchartwidget.cpp" line="98"/>
        <source>Hours: </source>
        <translation>Ore: </translation>
    </message>
</context>
<context>
    <name>StatsQSOsPerDXCCBarChartWidget</name>
    <message>
        <location filename="../charts/statsqsosperdxccbarchartwidget.cpp" line="79"/>
        <source>QSOs per DXCC</source>
        <translation>QSO per DXCC</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperdxccbarchartwidget.cpp" line="83"/>
        <source>Reading data ... </source>
        <translation>Lettura dati ... </translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperdxccbarchartwidget.cpp" line="83"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperdxccbarchartwidget.cpp" line="85"/>
        <source>Reading data...</source>
        <translation>lettura dati...</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperdxccbarchartwidget.cpp" line="169"/>
        <source>DXCC</source>
        <translation>DXCC</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperdxccbarchartwidget.cpp" line="170"/>
        <source>Top ten DXCC per QSO</source>
        <translation>Primi 10 DXCC per QSO</translation>
    </message>
</context>
<context>
    <name>StatsQSOsPerHourBarChartWidget</name>
    <message>
        <location filename="../charts/statsqsosperhourbarchartwidget.cpp" line="78"/>
        <source>QSOs per hour</source>
        <translation>QSO per ora</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperhourbarchartwidget.cpp" line="82"/>
        <source>Reading data ... </source>
        <translation>Lettura dati ... </translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperhourbarchartwidget.cpp" line="82"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperhourbarchartwidget.cpp" line="90"/>
        <source>Hours</source>
        <translation>Ore</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperhourbarchartwidget.cpp" line="91"/>
        <source>QSOs at hour</source>
        <translation>QSO all&apos;ora</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperhourbarchartwidget.cpp" line="101"/>
        <source>Reading data ...</source>
        <translation>lettura dati ...</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperhourbarchartwidget.cpp" line="101"/>
        <source>Hours: </source>
        <translation>Ore: </translation>
    </message>
</context>
<context>
    <name>StatsQSOsPerModeBarChartWidget</name>
    <message>
        <location filename="../charts/statsqsospermodebarchartwidget.cpp" line="81"/>
        <source>QSOs per mode</source>
        <translation>QSO per modo</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermodebarchartwidget.cpp" line="85"/>
        <source>Reading data ... </source>
        <translation>Lettura dati ... </translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermodebarchartwidget.cpp" line="85"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermodebarchartwidget.cpp" line="90"/>
        <source>Modes</source>
        <translation>Modi</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermodebarchartwidget.cpp" line="91"/>
        <source>QSOs per mode distribution</source>
        <translation>QSO  per distribuzione modo</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermodebarchartwidget.cpp" line="101"/>
        <source>Reading data ...</source>
        <translation>lettura dati ...</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermodebarchartwidget.cpp" line="101"/>
        <source>Modes: </source>
        <translation>Modi: </translation>
    </message>
</context>
<context>
    <name>StatsQSOsPerMonthBarChartWidget</name>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="76"/>
        <source>QSOs per month</source>
        <translation>QSO per mese</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="80"/>
        <source>Reading data ... </source>
        <translation>Lettura dati ... </translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="80"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="85"/>
        <source>Jan</source>
        <translation>Gen</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="85"/>
        <source>Feb</source>
        <translation>Feb</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="85"/>
        <source>Mar</source>
        <translation>Mar</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="85"/>
        <source>Apr</source>
        <translation>Apr</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="85"/>
        <source>May</source>
        <translation>Mag</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="85"/>
        <source>Jun</source>
        <translation>Giu</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="86"/>
        <source>Jul</source>
        <translation>Lug</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="86"/>
        <source>Sep</source>
        <translation>Set</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="86"/>
        <source>Oct</source>
        <translation>Ott</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="86"/>
        <source>Nov</source>
        <translation>Nov</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="86"/>
        <source>Dec</source>
        <translation>Dic</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="86"/>
        <source>Aug</source>
        <translation>Ago</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="88"/>
        <source>Months</source>
        <translation>Mesi</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="89"/>
        <source>QSOs at Month</source>
        <translation>QSO al mese</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="98"/>
        <source>Reading data ...</source>
        <translation>Lettura dati ...</translation>
    </message>
    <message>
        <location filename="../charts/statsqsospermonthbarchartwidget.cpp" line="98"/>
        <source>Months: </source>
        <translation>Mesi: </translation>
    </message>
</context>
<context>
    <name>StatsQSOsPerYearBarChartWidget</name>
    <message>
        <location filename="../charts/statsqsosperyearbarchartwidget.cpp" line="81"/>
        <source>Reading data ... </source>
        <translation>Lettura dati ... </translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperyearbarchartwidget.cpp" line="81"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperyearbarchartwidget.cpp" line="64"/>
        <location filename="../charts/statsqsosperyearbarchartwidget.cpp" line="77"/>
        <source>QSOs</source>
        <translation>QSO</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperyearbarchartwidget.cpp" line="65"/>
        <source>QSOs per year</source>
        <translation>QSO per anno</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperyearbarchartwidget.cpp" line="94"/>
        <source>Reading data ...</source>
        <translation>Lettura dati ...</translation>
    </message>
    <message>
        <location filename="../charts/statsqsosperyearbarchartwidget.cpp" line="94"/>
        <source>QSO: %1/%2</source>
        <translation>QSO: %1/%2</translation>
    </message>
</context>
<context>
    <name>StatsSentConfirmedPieChartWidget</name>
    <message>
        <location filename="../charts/statssentconfirmedpiechartwidget.cpp" line="69"/>
        <source>Sent - %1</source>
        <translation>Spedito - %1</translation>
    </message>
    <message>
        <location filename="../charts/statssentconfirmedpiechartwidget.cpp" line="70"/>
        <source>Confirmed - %2</source>
        <translation>Confermato - %2</translation>
    </message>
    <message>
        <location filename="../charts/statssentconfirmedpiechartwidget.cpp" line="85"/>
        <source>Sent / Confirmed status</source>
        <translation>Stato Trasferiti / Confermati</translation>
    </message>
</context>
<context>
    <name>StatsWorkedConfirmedPieChartWidget</name>
    <message>
        <location filename="../charts/statsworkedconfirmedpiechartwidget.cpp" line="73"/>
        <source>Worked, not confirmed - %1</source>
        <translation>Processato, non confermato - %1</translation>
    </message>
    <message>
        <location filename="../charts/statsworkedconfirmedpiechartwidget.cpp" line="74"/>
        <source>Confirmed - %2</source>
        <translation>Confermato - %2</translation>
    </message>
    <message>
        <location filename="../charts/statsworkedconfirmedpiechartwidget.cpp" line="89"/>
        <source>Worked / Confirmed status</source>
        <translation>Stato Processati / Confermati</translation>
    </message>
</context>
<context>
    <name>StatsWorkedSentPieChartWidget</name>
    <message>
        <location filename="../charts/statsworkedsentpiechartwidget.cpp" line="69"/>
        <source>Worked - %1</source>
        <translation>Processato - %1</translation>
    </message>
    <message>
        <location filename="../charts/statsworkedsentpiechartwidget.cpp" line="70"/>
        <source>Sent - %2</source>
        <translation>Spedito - %2</translation>
    </message>
    <message>
        <location filename="../charts/statsworkedsentpiechartwidget.cpp" line="86"/>
        <source>Worked / Sent status</source>
        <translation>Stato Processati / Spediti</translation>
    </message>
</context>
<context>
    <name>TipsDialog</name>
    <message>
        <location filename="../tipsdialog.cpp" line="44"/>
        <source>KLog tips</source>
        <translation>KLog suggerimenti</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="57"/>
        <source>Next</source>
        <translation>Successivo</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="58"/>
        <source>Previous</source>
        <translation>Precedente</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="133"/>
        <source>&lt;b&gt;Tip #1:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can use &lt;a href=&quot;#ToolsFillInQSO&quot;&gt;Tools-&gt;Fill in QSO data&lt;/a&gt; to automatically read the full log to fill the DXCC, CQ, ITU zones and continent?</source>
        <extracomment>Translator: Please make sure that the name of the link is coherent with the menu Tools-&gt;Fill in QSO data</extracomment>
        <translation>&lt;b&gt;Tip #1:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;E&apos; anche disponibile &lt;a href=&quot;#ToolsFillInQSO&quot;&gt;Strumenti-&gt;Completa dati QSO&lt;/a&gt; che acquisce il log QSO completo di DXCC e lo usa per compilare automaticamente i dati della tua registrazione QSL Locale con informazioni DXCC, CQ, zone ITU e continenti?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="141"/>
        <source>&lt;b&gt;Tip #3:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can use &lt;a href=&quot;#ToolsFindQSO2QSL&quot;&gt;Tools-&gt;QSL tools...-&gt;Find QSO to QSL&lt;/a&gt; to look for all those QSO that you should send your QSL because you still need to confirm that DXCC and you have still not send your QSL card?</source>
        <extracomment>Translator: Please make sure that the name of the link is coherent with the menu Tools-&gt;QSL tools...-&gt;Find QSO to QSL</extracomment>
        <translation>&lt;b&gt;Tip #3:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;E&apos; anche disponibile &lt;a href=&quot;#ToolsFindQSO2QSL&quot;&gt;Strumenti-&gt;Strumenti QSL...-&gt;Cerca QSO su QSL&lt;/a&gt; per cercare tutti quei QSO per i quali dovresti spedire la QSL, non ancora spedita, perché stai ancora aspettando la conferma da DXCC?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="137"/>
        <source>&lt;b&gt;Tip #2:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can find the QSLs that you still need to send with &lt;a href=&quot;#ToolsSendPendingQSL&quot;&gt;Tools-&gt;QSL tools...-&gt;Find My-QSLs pending to send&lt;/a&gt;.&lt;bR&gt;This tool will list you in the search box all the QSOs with the QSL-Sent marked as &lt;i&gt;Requested&lt;/i&gt;.</source>
        <extracomment>Translator: Please make sure that the name of the link is coherent with the menu Tools-&gt;Fill in DXCC data</extracomment>
        <translation>&lt;b&gt;Tip #2:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi scoprire quali QSL hai ancora da spedire con &lt;a href=&quot;#ToolsSendPendingQSL&quot;&gt;Strumenti-&gt;Strumenti QSL...-&gt; Trova le mie QSL In attesa di spedizione&lt;/a&gt;.&lt;bR&gt;Questo strumento elencherà all&apos;interno della maschera di ricerca tutte le QSL spedite segnate come &lt;i&gt;Richieste&lt;/i&gt;. {2:?}.</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="145"/>
        <source>&lt;b&gt;Tip #4:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can enter a &apos;*&apos; in the search box, in the search window to search for all the QSOs done with one specific station callsign?</source>
        <extracomment>Translator: Please make sure that the name of the link is coherent with the menu File-&gt;Export Requested QSL to ADIF...</extracomment>
        <translation>&lt;b&gt;Tip #4:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi sempre inserire il wild char * nella maschera di ricerca, per trovare tutti i QSO fatti con uno specifico nominativo?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="148"/>
        <source>&lt;b&gt;Tip #5:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can find the file containing all your log and other information in the logbook.dat file and the klogrc file, containing the KLog config file in the KLog folder by opening the &lt;a href=&quot;#FileOpenKLogFolder&quot;&gt;File-&gt;KLog folder&lt;/a&gt; menu?</source>
        <translation>&lt;b&gt;Tip #5:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Sono sempre disponibili tutti i tuoi log e altre informazioni nel file logbook.dat e nel file klogrc, nel file di configurazione di KLog config file nella cartella dati KLog aprendi direttamente  il menù &lt;a href=&quot;#FileOpenKLogFolder&quot;&gt;File-&gt;Cartella KLog&lt;/a&gt; ?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="154"/>
        <source>&lt;b&gt;Tip #6:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can upload your QSO marked as queued to LoTW via TQSL with &lt;a href=&quot;#ToolsUploadLoTW&quot;&gt;Tools-&gt;LoTW tools ...-&gt;Sends the log to LoTW calling TQSL.&lt;/a&gt; ?&lt;br&gt;&lt;br&gt;You have to configure TQSL in the preferences to be able to use this functionality.</source>
        <extracomment>Translator: Please make sure that the name of the link is coherent with the menu File-&gt;KLog folder</extracomment>
        <translation>&lt;b&gt;Tip #6:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;E&apos; possibile trasferire i tuoi QSO marcati e messi in coda per LoTW via TQSL con &lt;a href=&quot;#ToolsUploadLoTW&quot;&gt;Strumenti-&gt;Strumenti LoTW ...-&gt;Trasferisce il log delle chiamate a LoTW delle TQSL.&lt;/a&gt; ?&lt;br&gt;&lt;br&gt;E&apos; necessario che TQSL nelle impostazioni per pytoer usare questa funzionalità.</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="158"/>
        <source>&lt;b&gt;Tip #7:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can see the QSO that confirms one specific DXCC entity in one specific band by poiting your mouse over that band in the DXCC widget?</source>
        <extracomment>Translator: Please make sure that the name of the link is coherent with the menu QSL tools...-&gt;Find My-QSLs pending to send</extracomment>
        <translation>&lt;b&gt;Tip #7:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi sempre vedere i QSO che confermano uno specifico collegamento DXCC all&apos;interno di una specifica banda puntando con il mouse sulla banda nel widget DXCC?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="162"/>
        <source>&lt;b&gt;Tip #8:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can find the QSLs that you are still waiting for with &lt;a href=&quot;#ToolsReceivePendingQSL&quot;&gt;Tools-&gt;QSL tools...-&gt;Find DX-QSLs pending to receive&lt;/a&gt;.&lt;bR&gt;This tool will list you in the search box all the QSOs with the QSL-Sent marked as &lt;i&gt;Sent&lt;/i&gt; but you have still not received the QSL card from the DX.</source>
        <extracomment>Translator: Please make sure that the name of the link is coherent with the menu QSL tools...-&gt;Find DX-QSLs pending to receive</extracomment>
        <translation>&lt;b&gt;Tip #8:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi scoprire di quali QSL sei ancora in attesa con &lt;a href=&quot;#ToolsReceivePendingQSL&quot;&gt;Strumenti-&gt;Strumenti QSL...-&gt;Trova DX QSL in attesa di ricezione&lt;/a&gt;.&lt;bR&gt;Questo strumento ti elencherà nella maschera di ricerca tutti i QSO marcati come &lt;i&gt;Spediti&lt;/i&gt; ma per i quali non hai ancora ricevuto la QSL di risposta.</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="166"/>
        <source>&lt;b&gt;Tip #9:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can find the QSLs that you are still waiting for with &lt;a href=&quot;#ToolsReceiveRecPendingQSL&quot;&gt;Tools-&gt;QSL tools...-&gt;Find requested pending to receive&lt;/a&gt;.&lt;bR&gt;This tool will list you in the search box all the QSOs with the QSL-Rec marked as &lt;i&gt;Requested&lt;/i&gt; but you have still not received the QSL card from the DX.</source>
        <extracomment>Translator: Please make sure that the name of the link is coherent with the menu QSL tools...-&gt;Find requested pending to receive</extracomment>
        <translation>&lt;b&gt;Tip #9:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi scoprire le QSL che stai ancora aspettando con &lt;a href=&quot;#ToolsReceiveRecPendingQSL&quot;&gt;Strumenti-&gt;Strumenti QSL...-&gt;Cerca QSL richieste in attesa di ricezione&lt;/a&gt;.&lt;bR&gt;Questo strumento ti elencherà nella maschera di ricerca tutti i QSO con il campo registrazione QSL marcato come &lt;i&gt;Richiesto&lt;/i&gt; ma per i quali non hai ancora ricevuto la QSL relativa al DX.</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="169"/>
        <source>&lt;b&gt;Tip #10:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can subscribe to the &lt;a href=https://t.me/klogchat&gt;English KLog Telegram group&lt;/a&gt; to discuss about KLog in English?</source>
        <translation>&lt;b&gt;Tip #10:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi sempre iscriverti al &lt;a href=https://t.me/klogchat&gt;Inglese Gruppo Telegram KLog&lt;/a&gt; per parlare di KLog in Inglese?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="172"/>
        <source>&lt;b&gt;Tip #11:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can subscribe to the &lt;a href=https://t.me/KLogES&gt;Spanish Telegram group&lt;/a&gt; to discuss about KLog in Spanish?</source>
        <translation>&lt;b&gt;Tip #11:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi sempre iscriverti al &lt;a href=https://t.me/KLogES&gt;Spagnolo Gruppo Telegram KLog&lt;/a&gt; per parlare di KLog in Spagnolo?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="175"/>
        <source>&lt;b&gt;Tip #12:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can subscribe to &lt;a href=https://groups.io/g/klog&gt;KLog mailing list&lt;/a&gt; to discuss via email about KLog in English?</source>
        <translation>&lt;b&gt;Tip #12:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi sempre iscriverti a &lt;a href=https://groups.io/g/klog&gt;Mailing list utenti KLog&lt;/a&gt; per parlare via email su KLog in Inglese?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="178"/>
        <source>&lt;b&gt;Tip #13:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can &lt;a href=https://twitter.com/_ea4k&gt;follow EA4K on twitter&lt;/a&gt; to get updates about KLog?</source>
        <translation>&lt;b&gt;Tip #13:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi sempre &lt;a href=https://twitter.com/_ea4k&gt;seguire EA4K su twitter&lt;/a&gt; per ottenere aggiornamenti su KLog?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="181"/>
        <source>&lt;b&gt;Tip #14:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can write your own &lt;a href=https://www.eham.net/reviews/detail/3118&gt;review in eHam.net about KLog&lt;/a&gt; to help other users to decide to use KLog?</source>
        <translation>&lt;b&gt;Tip #14:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi scrivere una tua &lt;a href=https://www.eham.net/reviews/detail/3118&gt;recenzione su eHam.net per KLog&lt;/a&gt; per convincere altri utenti a scegliere KLog?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="184"/>
        <source>&lt;b&gt;Tip #15:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can join the development team by simply &lt;a href=https://github.com/ea4k/klog?tab=readme-ov-file#telegram-groups&gt;Contacting us&lt;/a&gt;?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="187"/>
        <source>&lt;b&gt;Tip #16:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;That there are many ways to contribute to KLog and some of them are listed in the &lt;a href=https://github.com/ea4k/klog/issues&gt;KLog issues&lt;/a&gt; page?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="190"/>
        <source>&lt;b&gt;Tip #17:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can support translating KLog into your language? Please check &lt;a href=https://github.com/ea4k/klog/tree/master/src/translations&gt;KLog Translations&lt;/a&gt; page.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;b&gt;Tip #15:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can join the development team by simply &lt;a href=https://www.klog.xyz/contact&gt;Contacting us&lt;/a&gt;?</source>
        <translation type="vanished">&lt;b&gt;Tip #15:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi sempre unirti allo staff di sviluppo semplicemente &lt;a href=https://www.klog.xyz/contact&gt;Contattandoci&lt;/a&gt;?</translation>
    </message>
    <message>
        <source>&lt;b&gt;Tip #16:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;That there are many ways to contribute to KLog and some of them are listed in the &lt;a href=https://www.klog.xyz/contrib&gt;KLog Contribute&lt;/a&gt; page?</source>
        <translation type="vanished">&lt;b&gt;Tip #16:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi contribuire alla crescita di KLog in monlti diversi modi, contenuti nella pagina &lt;a href=https://www.klog.xyz/contrib&gt;KLog Contributo&lt;/a&gt; ?</translation>
    </message>
    <message>
        <source>&lt;b&gt;Tip #17:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can support translating KLog into your language? Please check &lt;a href=https://www.klog.xyz/contrib/translations&gt;KLog Translations&lt;/a&gt; page.</source>
        <translation type="vanished">&lt;b&gt;Tip #17:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi aiutare a tradurre KLOg nella tua lingua? Per favore controlla sulla pagina &lt;a href=https://www.klog.xyz/contrib/translations&gt;KLog Traduzioni&lt;/a&gt; .</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="193"/>
        <source>&lt;b&gt;Tip #18:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can double-click on an entity name in the DXCC table and all the QSOs with that DXCC Entity will be shown in the search box?</source>
        <translation>&lt;b&gt;Tip #18:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi fare un doppio click sul nome di un collegamento nell&apos;elenco DXCC e saranno mostrati tutti i QSO relativi a quel collegamento DXCC nella maschera di ricerca?</translation>
    </message>
    <message>
        <location filename="../tipsdialog.cpp" line="196"/>
        <source>&lt;b&gt;Tip #19:&lt;/b&gt;&lt;br&gt;Do you know...&lt;br&gt;You can right-click on a QSO and select &lt;i&gt;Check in QRZ.com&lt;/i&gt; to check that callsign in QRZ.com?</source>
        <translation>&lt;b&gt;Tip #19:&lt;/b&gt;&lt;br&gt;Dovresti sapere che...&lt;br&gt;Puoi sempre cloccare su un QSO e verificare su &lt;i&gt;Check in QRZ.com&lt;/i&gt; l&apos;esistenza del nominativo su QRZ.com?</translation>
    </message>
</context>
<context>
    <name>UpdateSatsData</name>
    <message>
        <location filename="../updatesatsdata.cpp" line="89"/>
        <source>Reading Satellites data file...</source>
        <translation>Lettura file dati satelliti...</translation>
    </message>
    <message>
        <location filename="../updatesatsdata.cpp" line="89"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../updatesatsdata.cpp" line="243"/>
        <source>The Satellites information has been updated.</source>
        <translation>Informazioni satelliti aggiornate.</translation>
    </message>
    <message>
        <location filename="../updatesatsdata.cpp" line="261"/>
        <source>Open File</source>
        <translation>Apre File</translation>
    </message>
    <message>
        <location filename="../updatesatsdata.cpp" line="263"/>
        <source>Sat Data</source>
        <translation>Dati satelliti</translation>
    </message>
</context>
<context>
    <name>UpdateSettings</name>
    <message>
        <location filename="../updatesettings.cpp" line="109"/>
        <source>KLog - Settings update</source>
        <translation>KLog - Aggiornamento setup</translation>
    </message>
    <message>
        <location filename="../updatesettings.cpp" line="111"/>
        <source>The settings system has been changed and KLog will update your settings file.</source>
        <translation>Le impostazioni di sistema sono cambiate e KLog aggiornerà il file di configrazione.</translation>
    </message>
</context>
<context>
    <name>World</name>
    <message>
        <source>Entity</source>
        <translation type="vanished">Collegamento</translation>
    </message>
    <message>
        <source>Continent</source>
        <translation type="vanished">continente</translation>
    </message>
    <message>
        <location filename="../world.cpp" line="576"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../world.cpp" line="576"/>
        <source>Reading cty.csv...</source>
        <translation>Lettura cty.cvs...</translation>
    </message>
    <message>
        <location filename="../world.cpp" line="962"/>
        <source>KLog DXCC</source>
        <translation type="unfinished">KLog-DXCC</translation>
    </message>
    <message>
        <location filename="../world.cpp" line="963"/>
        <source>All QSOs have been updated with a DXCC and the Continent.</source>
        <translation type="unfinished">Tutti i QSO e dil Continente aggiornati con DXCC.</translation>
    </message>
</context>
<context>
    <name>eLogClubLog</name>
    <message>
        <location filename="../elogclublog.cpp" line="94"/>
        <location filename="../elogclublog.cpp" line="176"/>
        <source>Host not found!</source>
        <translation>Host non trovato!</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="100"/>
        <location filename="../elogclublog.cpp" line="181"/>
        <source>Timeout error!</source>
        <translation>Errore di Timeout!</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="107"/>
        <location filename="../elogclublog.cpp" line="132"/>
        <location filename="../elogclublog.cpp" line="141"/>
        <source>KLog - ClubLog</source>
        <translation>KLog - ClubLog</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="134"/>
        <source>This error may be caused for the QSO being duplicated or, if removing, trying to remove a non existing QSO.</source>
        <translation>Questo errore può essere cusato dalla presenza di QSO duplicati o,quando rimossi, per QSO macanti.</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="186"/>
        <source>Undefined error...</source>
        <translation>Errore indefinito...</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="558"/>
        <source>Callsign missing</source>
        <translation>Nominativo di chiamata assente</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="562"/>
        <source>Invalid callsign</source>
        <translation>Nominativo di stazione non valido</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="566"/>
        <source>Skipping SWL callsign</source>
        <translation>Salto nominativo SWL</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="570"/>
        <source>Callsign is your own call</source>
        <translation>Callsign is you own call</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="574"/>
        <source>Invalid callsign with no DXCC mapping</source>
        <translation>Nominativo di stazione non valido con nessuna localizzazione DXCC</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="578"/>
        <source>Updated QSO</source>
        <translation>Trasferito QSO</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="582"/>
        <source>Invalid ADIF record</source>
        <translation>Record ADIF non valido</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="586"/>
        <source>Missing ADIF record</source>
        <translation>Record ADIF mancante</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="590"/>
        <source>Test mode - parameters ok, no action taken</source>
        <translation>Modalità test parametri ok, nessuna azione intrapresa</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="140"/>
        <source>Undefined error number (#%1)... </source>
        <translation>Numero di errore idnefinito (#%1)... </translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="133"/>
        <location filename="../elogclublog.cpp" line="142"/>
        <source>We have received an undefined error from Clublog (%1)</source>
        <translation>Ricevuto erorre idnefinito da ClubLog (%1)</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="131"/>
        <source>QSO dupe or not existing (#%1)... </source>
        <translation>QSO duplicato o mancante (#%1)... </translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="105"/>
        <source>It seems to be a CREDENTIALS ERROR; check your email and password.</source>
        <translation>Rilevo un errore sulle credenziali; controlla email e password.</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="108"/>
        <source>It seems that your ClubLog credentials are not correct.</source>
        <translation>Sembra che le tue credenziali ClubLog non siano corrette.</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="109"/>
        <source>Please check your credentials in the setup. ClubLog uploads will be disabled.</source>
        <translation>Per favore controlla le tue credenziali nelle impostazioni. Invio file ClubLog disabilitato.</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="143"/>
        <source>Please check your config in the setup and contact the KLog development team if you can&apos;t fix it. ClubLog uploads will be disabled.</source>
        <translation>Per favore verifica nella tua configurazione e contatta il team di sviluppo di KLog se non riesci a farlo funzionare.Trasferimenti a ClubLog disabilitati.</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="594"/>
        <source>Excessive API Usage</source>
        <translation>Eccessivo uso delle API</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="598"/>
        <source>Internal Error</source>
        <translation>Errore Interno</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="602"/>
        <source>Rejected</source>
        <translation>Rifiutato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="606"/>
        <source>QSO Duplicate</source>
        <translation>QSO Duplicato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="610"/>
        <source>QSO Modified</source>
        <translation>QSO Modificato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="614"/>
        <source>Missing Login</source>
        <translation>Login mancante</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="618"/>
        <source>QSO OK</source>
        <translation>QSO OK</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="622"/>
        <location filename="../elogclublog.cpp" line="646"/>
        <source>Upload denied</source>
        <translation>Trasferimento rifiutato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="626"/>
        <source>No callsign selected</source>
        <translation>Nessun nominativo selezionato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="630"/>
        <source>No match found</source>
        <translation>Nessuna corrispondenza trovata</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="634"/>
        <source>Dropped QSO</source>
        <translation>QSO interrotto</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="638"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="642"/>
        <source>Login rejected</source>
        <translation>Login rifiutato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="650"/>
        <source>Rejected: Callsign is your own call</source>
        <translation>Rifiutato: Nominativo is your own call</translation>
    </message>
</context>
<context>
    <name>eLogQrzLog</name>
    <message>
        <location filename="../elogqrzlog.cpp" line="103"/>
        <source>Host not found!</source>
        <translation>Host non trovato!</translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="106"/>
        <source>Timeout error!</source>
        <translation>Errore di Timeout!</translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="109"/>
        <source>Undefined error number (#%1)</source>
        <translation>Numero di errore undefinito (#%1)</translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="115"/>
        <source>We have received the following error from QRZ.com (%1)</source>
        <translation>Ricevuto il seguente errore da QRZ.com (%1)</translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="317"/>
        <source>You are not subscribed to QRZ.com.</source>
        <translation>Non sei iscritto a QRZ.com.</translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="618"/>
        <source>Not valid KEY found</source>
        <translation>Nessuna KEY valida trovata</translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="619"/>
        <source>Please configure your QRZ.com API key. You will find it in your QRZ.com Logbook settings webpage.
You need a QRZ.com subscription to use this feature.</source>
        <translation>Per favore configura la chiave API del tuo QRZ.com. La trovi nella pagina web del tuo logbok su QRZ.com.
E&apos; necessaria la registrazione sul sito QRZ.com poter ptoer usare questa funzione.</translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="712"/>
        <source>KLog - QRZ.com password needed</source>
        <translation>KLog. - Password QRZ.com richiesta</translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="712"/>
        <source>Please enter your QRZ.com password: </source>
        <translation>Per fsavore isnerisci la tua password QRZ.com: </translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="114"/>
        <location filename="../elogqrzlog.cpp" line="617"/>
        <source>KLog - QRZ.com</source>
        <translation>KLog QRZ.com</translation>
    </message>
    <message>
        <location filename="../elogqrzlog.cpp" line="792"/>
        <source>Callsign missing</source>
        <translation>Nominativo di stazione assente</translation>
    </message>
</context>
<context>
    <name>eQSLUtilities</name>
    <message>
        <location filename="../eqslutilities.cpp" line="110"/>
        <source>Host not found!</source>
        <translation>Host non trovato!</translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="116"/>
        <source>Timeout error!</source>
        <translation>Errore di Timeout!</translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="122"/>
        <source>Undefined error number (#%1)... </source>
        <translation>Numero errore idnefinito (#%1)... </translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="180"/>
        <source>eQSL Error: User or password incorrect</source>
        <translation>Errore eQSL: utente o password sbagliate</translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="186"/>
        <source>eQSL Warning: At least one of the uplodaded QSOs is duplicated.</source>
        <translation>Warning eQSSL: Almeno uno del QSO trasaferiti è duplicato.</translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="191"/>
        <source>eQSL: All the QSOs were properly uploaded.</source>
        <translation>eQSL: Tutti i QSO correttamente trasferiti.</translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="243"/>
        <source>KLog - eQSL.cc password needed</source>
        <translation>KLog - Password eQSL.cc richiesto</translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="243"/>
        <source>Please enter your eQSL.cc password: </source>
        <translation>Pler favore isnerirsci la tua password per wQSO.cc: </translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="92"/>
        <location filename="../eqslutilities.cpp" line="123"/>
        <source>KLog - eQSL</source>
        <translation>KLog - eQSL</translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="92"/>
        <source>eQSL has sent the following message:
%1</source>
        <translation>eQSL ha mandato il seguente messaggio:
%1</translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="124"/>
        <source>We have received an undefined error from eQSL (%1)</source>
        <translation>Ricevuto erorre idnefinito da eQSL (%1)</translation>
    </message>
    <message>
        <location filename="../eqslutilities.cpp" line="125"/>
        <source>Please check your config in the setup and contact the KLog development team if you can&apos;t fix it. eQSL uploads will be disabled.</source>
        <translation>Per favore controlla la tua configurazione e contatta il team di sviluppo di KLog se non riesci a rrisolvere i problema. Trasaferimento eQSL disabilitato.</translation>
    </message>
</context>
</TS>
