NAME

    Device::Chip::MCP4725 - chip driver for MCP4725

SYNOPSIS

     use Device::Chip::MCP4725;
    
     my $chip = Device::Chip::MCP4725->new;
     $chip->mount( Device::Chip::Adapter::...->new )->get;
    
     # Presuming Vcc = 5V
     $chip->write_dac( 4096 * 1.23 / 5 )->get;
     print "Output is now set to 1.23V\n";

DESCRIPTION

    This Device::Chip subclass provides specific communication to a
    Microchip MCP4725 attached to a computer via an I²C adapter.

    The reader is presumed to be familiar with the general operation of
    this chip; the documentation here will not attempt to explain or define
    chip-specific concepts or features, only the use of this module to
    access them.

MOUNT PARAMETERS

 addr

    The I²C address of the device. Can be specified in decimal, octal or
    hex with leading 0 or 0x prefixes.

ACCESSORS

    The following methods documented with a trailing call to ->get return
    Future instances.

 read_config

       $config = $chip->read_config->get

    Returns a HASH reference containing the chip's current configuration

       RDY => 0 | 1
       POR => 0 | 1
    
       PD  => "normal" | "1k" | "100k" | "500k"
       DAC => 0 .. 4095
    
       EEPROM_PD  => "normal" | "1k" | "100k" | "500k"
       EEPROM_DAC => 0 .. 4095

METHODS

 write_dac

       $chip->write_dac( $dac, $powerdown )->get

    Writes a new value for the DAC output and powerdown state in "fast"
    mode.

    $powerdown is optional and will default to 0 if not provided.

 write_dac_and_eeprom

       $chip->write_dac_and_eeprom( $dac, $powerdown )

    As "write_dac" but also updates the EEPROM with the same values.

AUTHOR

    Paul Evans <leonerd@leonerd.org.uk>