
### The above line is deliberately left blank.  If it starts with a #,
### some CSH's will think this is a csh script.

#### Configuration script for GNU Emacs
#### Copyright (C) 1992 Free Software Foundation, Inc.

### This file is part of GNU Emacs.

### GNU Emacs is free software; you can redistribute it and/or modify
### it under the terms of the GNU General Public License as published by
### the Free Software Foundation; either version 1, or (at your option)
### any later version.

### GNU Emacs is distributed in the hope that it will be useful,
### but WITHOUT ANY WARRANTY; without even the implied warranty of
### MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
### GNU General Public License for more details.

### You should have received a copy of the GNU General Public License
### along with GNU Emacs; see the file COPYING.  If not, write to
### the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.


### Since Emacs has configuration requirements that autoconf can't
### meet, this file is an unholy marriage of custom-baked
### configuration code and autoconf macros.  New versions of autoconf
### could very well break this arrangement.
###
### We omit the invocation of autoconf's initialization function,
### because it produces Bourne shell code to parse arguments, but we
### need to parse our own arguments.
###
### We use the m4 quoting characters [ ] (as established by the
### autoconf system) to include large sections of raw sewage - Oops, I
### mean, shell code - in the final configuration script.
###
### Usage: configure config_name
###
### If configure succeeds, it leaves its status in config.status.
### If configure fails after disturbing the status quo,
### 	config.status is removed.


### Remove any more than one leading "." element from the path name.
### If we don't remove them, then another "./" will be prepended to
### the file name each time we use config.status, and the program name
### will get larger and larger.  This wouldn't be a problem, except
### that since progname gets recorded in all the Makefiles this script
### produces, move-if-change thinks they're different when they're
### not.
###
### It would be nice if we could put the ./ in a \( \) group and then
### apply the * operator to that, so we remove as many leading ./././'s
### as are present, but some seds (like Ultrix's sed) don't allow you to
### apply * to a \( \) group.  Bleah.
progname="`echo $0 | sed 's:^\./\./:\./:'`"


#### Usage messages.

short_usage="Type \`${progname} --usage' for more information about options."

long_usage="Usage: ${progname} CONFIGURATION [-OPTION[=VALUE] ...]

Set compilation and installation parameters for GNU Emacs, and report.
CONFIGURATION specifies the machine and operating system to build for.
For example:
        ${progname} sparc-sun-sunos4.1
configures Emacs to build on a Sun Sparc machine running SunOS 4.1, and 
        ${progname} decstation
configures Emacs to run on a DECstation running Ultrix.  See \`etc/MACHINES'.

The --with-x, --with-x11 and --with-x10 options specify what window
	system to use; if all are omitted, use X11 if present.  If you
	don't want X, specify \`--with-x=no'.

The --x-includes=DIR option tells the build process where to search
	for the X Windows header files.  DIR should have a
	subdirectory called \`X11' which contains \`X.h', \`Xlib.h', and
	the rest of the header files; DIR should not contain \`X11'
	itself.  If this option is omitted, the build process assumes
	they exist in a directory the compiler checks by default.

The --x-libraries=DIR option tells the build process where to look for
	the X windows libraries.  If this option is omitted, the build
	process assumes they are in a directory the compiler checks by
	default.

The --with-gcc option says that the build process should use GCC to
	compile Emacs.  If you have GCC but don't want to use it,
	specify \`--with-gcc=no'.  \`configure' tries to guess whether
	or not you have GCC by searching your executable path, but if
	it guesses incorrectly, you may need to use this.

The --run-in-place option sets up default values for the path
	variables in \`./Makefile' so that Emacs will expect to find
	its data files (lisp libraries, runnable programs, and the
	like) in the same locations they occupy while Emacs builds.
	This means that you don't have to install Emacs in order to
	run it; it uses its data files as they were unpacked.

The --srcdir=DIR option specifies that the configuration and build
	processes should look for the Emacs source code in DIR, when
	DIR is not the current directory.

If successful, ${progname} leaves its status in config.status.  If
unsuccessful after disturbing the status quo, it removes config.status."


#### Option processing.

### Record all the arguments, so we can save them in config.status.
arguments="$@"

### These values are used to comment and uncomment different values
### for the path variables in the Makefile, to choose the installed
### configuration or the run-in-place configuration.
rip_paths='#disabled# '
inst_paths=''

while [ $# != 0 ]; do
  arg="$1"
  case "${arg}" in

    ## Anything starting with a hyphen we assume is an option.
    -* )

      ## Separate the switch name from the value it's being given.
      case "${arg}" in
        -*=*)
	  opt=`echo ${arg} | sed 's:^-*\([^=]*\)=.*$:\1:'`
	  val=`echo ${arg} | sed 's:^-*[^=]*=\(.*\)$:\1:'`
	  valomitted=no
	;;
        -*)
          ## If FOO is a boolean argument, --FOO is equivalent to
          ## --FOO=yes.  Otherwise, the value comes from the next
          ## argument - see below.
	  opt=`echo ${arg} | sed 's:^-*\(.*\)$:\1:'`
          val="yes"
          valomitted=yes
        ;;
      esac

      ## Change `-' in the option name to `_'.
      optname="${opt}"
      opt="`echo ${opt} | tr - _`"

      ## Process the option.
      case "${opt}" in

        ## Has the user specified which window systems they want to support?
        "with_x" | "with_x11" | "with_x10" )
	  ## Make sure the value given was either "yes" or "no".
	  case "${val}" in
	    y | ye | yes )	val=yes ;;
	    n | no )		val=no  ;;
	    * )
	      (echo "${progname}: the \`--${optname}' option is supposed to have a boolean value.
Set it to either \`yes' or \`no'."
	       echo "${short_usage}") >&2
	      exit 1
	    ;;
	  esac
          eval "${opt}=\"${val}\""
        ;;

	## Has the user specified whether or not they want GCC?
	"with_gcc" )
	  ## Make sure the value given was either "yes" or "no".
	  case "${val}" in
	    y | ye | yes )	val=yes ;;
	    n | no )		val=no  ;;
	    * )
	      (echo "${progname}: the \`--${optname}' option is supposed to have a boolean value.
Set it to either \`yes' or \`no'."
	       echo "${short_usage}") >&2
	      exit 1
	    ;;
	  esac
          eval "${opt}=\"${val}\""
        ;;

        ## Has the user specified a source directory?
	"srcdir" )
	  ## If the value was omitted, get it from the next argument.
	  if [ "${valomitted}" = "yes" ]; then
	    ## Get the next argument from the argument list, if there is one.
            if [ $# = 1 ]; then
	      (echo "${progname}: You must give a value for the \`--${optname}' option, as in
    \`--${optname}=FOO'."
	       echo "${short_usage}") >&2
	      exit 1
	    fi
	    shift; val="$1"
	  fi
          srcdir="${val}"
	;;

	## Has the user tried to tell us where the X files are?
	## I think these are dopey, but no less than three alpha
	## testers, at large sites, have said they have their X files
	## installed in odd places.
	"x_includes" )
	  ## If the value was omitted, get it from the next argument.
	  if [ "${valomitted}" = "yes" ]; then
	    ## Get the next argument from the argument list, if there is one.
            if [ $# = 1 ]; then
	      (echo "${progname}: You must give a value for the \`--${optname}' option, as in
    \`--${optname}=FOO'."
	       echo "${short_usage}") >&2
	      exit 1
	    fi
	    shift; val="$1"
	  fi
	  x_includes="${val}"
	  C_SWITCH_X_SITE="-I${x_includes}"
        ;;
	"x_libraries" )
	  ## If the value was omitted, get it from the next argument.
	  if [ "${valomitted}" = "yes" ]; then
	    ## Get the next argument from the argument list, if there is one.
            if [ $# = 1 ]; then
	      (echo "${progname}: You must give a value for the \`--${optname}' option, as in
    \`--${optname}=FOO'."
	       echo "${short_usage}") >&2
	      exit 1
	    fi
	    shift; val="$1"
	  fi
	  x_libraries="${val}"
	  LD_SWITCH_X_SITE="-L${x_libraries}"
        ;;

	## Should this use the "development configuration"?
	"run_in_place" )
	  rip_paths=''
	  inst_paths='#disabled# '
	;;

	## Has the user asked for some help?
	"usage" | "help" )
	  echo "${long_usage}" | more
	  exit
	;;

        ## We ignore all other options silently.
      esac
    ;;

    ## Anything not starting with a hyphen we assume is a
    ## configuration name.
    *)
      configuration=${arg}
    ;;

  esac
  shift
done

if [ "${configuration}" = "" ]; then
  (echo "${progname}: You must specify a configuration name as an argument."
   echo "${short_usage}") >&2
  exit 1
fi


#### Decide where the source is.
case "${srcdir}" in

  ## If it's not specified, see if  `.' or `..' might work.
  "" )
    if [ -f "./src/lisp.h" -a -f "./lisp/version.el" ]; then
      srcdir=`pwd`
    else
      if [ -f "../src/lisp.h" -a -f "../lisp/version.el" ]; then
	srcdir=`(cd .. ; pwd)`
      else
	(echo "\
${progname}: Neither the current directory nor its parent seem to
contain the Emacs sources.  If you do not want to build Emacs in its
source tree, you should run \`${progname}' in the directory in which
you wish to build Emacs, using its \`--srcdir' option to say where the
sources may be found."
	 echo "${short_usage}") >&2
	exit 1
      fi
    fi
  ;;

  ## Otherwise, check if the directory they specified is okay.
  * )
    if [ ! -d "${srcdir}" -o ! -f "${srcdir}/src/lisp.h" -o ! -f "${srcdir}/lisp/version.el" ]; then
      (echo "\
${progname}: The directory specified with the \`--srcdir' option,
\`${srcdir}', doesn't seem to contain the Emacs sources.  You should
either run the \`${progname}' script at the top of the Emacs source
tree, or use the \`--srcdir' option to specify where the Emacs sources
are."
       echo "${short_usage}") >&2
      exit 1
    fi
  ;;

esac

### Make the necessary directories, if they don't exist.
if [ ! -d ./src ]; then
  mkdir ./src
fi
if [ ! -d ./lib-src ]; then
  mkdir ./lib-src
fi
if [ ! -d ./cpp ]; then
  mkdir ./cpp
fi
if [ ! -d ./oldXMenu ]; then
  mkdir ./oldXMenu
fi
if [ ! -d ./etc ]; then
  mkdir ./etc
fi

#### Given the configuration name, set machfile and opsysfile to the
#### names of the m/*.h and s/*.h files we should use.

### Canonicalize the configuration name.
echo "Checking the configuration name."
if configuration=`${srcdir}/config.sub "${configuration}"` ; then : ; else
  exit $?
fi

### If you add support for a new configuration, add code to this
### switch statement to recognize your configuration name and select
### the appropriate operating system and machine description files.

### You would hope that you could choose an m/*.h file pretty much
### based on the machine portion of the configuration name, and an s-
### file based on the operating system portion.  However, it turns out
### that each m/*.h file is pretty manufacturer-specific - for
### example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are
### all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS
### machines.  So we basically have to have a special case for each
### configuration name.
###
### As far as handling version numbers on operating systems is
### concerned, make sure things will fail in a fixable way.  If
### /etc/MACHINES doesn't say anything about version numbers, be
### prepared to handle anything reasonably.  If version numbers
### matter, be sure /etc/MACHINES says something about it.
###
### Eric Raymond says we should accept strings like "sysvr4" to mean
### "System V Release 4"; he writes, "The old convention encouraged
### confusion between `system' and `release' levels'."

machine='' opsys='' unported='false'
case "${configuration}" in

  ## Alliant machines
  ## Strictly speaking, we need the version of the alliant operating
  ## system to choose the right machine file, but currently the
  ## configuration name doesn't tell us enough to choose the right
  ## one; we need to give alliants their own operating system name to
  ## do this right.  When someone cares, they can help us.
  fx80-alliant-* )
    machine=alliant4 opsys=bsd4-2
  ;;
  i860-alliant-* )
    machine=alliant-2800 opsys=bsd4-3
  ;;

  ## Altos 3068
  m68*-altos-sysv* )
    machine=altos opsys=usg5-2
  ;;
    
  ## Amdahl UTS
  580-amdahl-sysv* )
    machine=amdahl opsys=usg5-2-2
  ;;

  ## Appallings - I mean, Apollos - running Domain
  m68*-apollo* )
    machine=apollo opsys=bsd4-2
  ;;

  ## AT&T 3b2, 3b5, 3b15, 3b20
  we32k-att-sysv* )
    machine=att3b opsys=usg5-2-2
  ;;

  ## AT&T 3b1 - The Mighty Unix PC!
  m68*-att-sysv* )
    machine=7300 opsys=usg5-2-2
  ;;

  ## Bull sps7
  m68*-bull-sysv* )
    machine=sps7 opsys=usg5-2
  ;;

  ## CCI 5/32, 6/32 -- see "Tahoe".

  ## Celerity
  ## I don't know what configuration name to use for this; config.sub
  ## doesn't seem to know anything about it.  Hey, Celerity users, get
  ## in touch with us!
  celerity-celerity-bsd* )
    machine=celerity opsys=bsd4-2
  ;;

  ## Clipper
  ## What operating systems does this chip run that Emacs has been
  ## tested on?
  clipper-* )
    machine=clipper
    ## We'll use the catch-all code at the bottom to guess the
    ## operating system.
  ;;

  ## Convex
  *-convex-bsd* )
    machine=convex opsys=bsd4-3
  ;;

  ## Cubix QBx/386
  i386-cubix-sysv* )
    machine=intel386 opsys=usg5-3
  ;;

  ## Cydra 5
  cydra*-cydrome-sysv* )
    machine=cydra5 opsys=usg5-3
  ;;

  ## DECstations
  mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0 | mips-dec-bsd4.2 )
    machine=pmax opsys=bsd4-2
  ;;
  mips-dec-ultrix* | mips-dec-bsd* )
    machine=pmax opsys=bsd4-3
  ;;
  mips-dec-osf* )
    machine=pmax opsys=osf1
  ;;

  ## Motorola Delta machines
  m68*-motorola-sysv* )
    machine=delta opsys=usg5-3
  ;;
  m88k-motorola-sysv* | m88k-motorola-m88kbcs* )
    machine=delta88k opsys=usg5-3
  ;;

  ## Dual machines
  m68*-dual-sysv* )
    machine=dual opsys=usg5-2
  ;;
  m68*-dual-uniplus* )
    machine=dual opsys=unipl5-2
  ;;

  ## Elxsi 6400
  elxsi-elxsi-sysv* )
    machine=elxsi opsys=usg5-2
  ;;

  ## Encore machines
  ns16k-encore-bsd* )
    machine=ns16000 opsys=umax
  ;;

  ## The GEC 93 - apparently, this port isn't really finished yet.

  ## Gould Power Node and NP1
  pn-gould-bsd4.2 )
    machine=gould opsys=bsd4-2
  ;;
  pn-gould-bsd4.3 )
    machine=gould opsys=bsd4-3
  ;;
  np1-gould-bsd* )
    machine=gould-np1 opsys=bsd4-3
  ;;

  ## Honeywell XPS100
  xps*-honeywell-sysv* )
    machine=xps100 opsys=usg5-2
  ;;

  ## HP 9000 series 200 or 300
  m68*-hp-bsd* )
    machine=hp9000s300 opsys=bsd4-3
  ;;
  ## HP/UX 8 doesn't run on these machines, so use HP/UX 7.
  m68*-hp-hpux* )
    machine=hp9000s300 opsys=hpux
  ;;

  ## HP 9000 series 800, running HP/UX
  hppa1.0-hp-hpux* )
    machine=hp9000s800 opsys=hpux
  ;;

  ## Orion machines
  orion-orion-bsd* )
    machine=orion opsys=bsd4-2
  ;;
  clipper-orion-bsd* )
    machine=orion105 opsys=bsd4-2
  ;;

  ## IBM machines
  i386-ibm-aix1.1 )
    machine=ibmps2-aix opsys=usg5-2-2
  ;;
  i386-ibm-aix1.2 )
    machine=ibmps2-aix opsys=usg5-3
  ;;
  rs6000-ibm-aix3.1 )
    machine=ibmrs6000 opsys=aix3-1
  ;;
  rs6000-ibm-aix3.2 | rs6000-ibm-aix* )
    machine=ibmrs6000 opsys=aix3-2
  ;;
  romp-ibm-bsd* )
    machine=ibmrt opsys=bsd4-2
  ;;
  romp-ibm-aix* )
    machine=ibmrt-aix opsys=usg5-2-2
  ;;

  ## Integrated Solutions `Optimum V'
  m68*-isi-bsd4.2 )
    machine=isi-ov opsys=bsd4-2
  ;;
  m68*-isi-bsd4.3 )
    machine=isi-ov opsys=bsd4-3
  ;;

  ## Intel 386 machines where we do care about the manufacturer
  i[34]86-intsys-sysv* )
    machine=is386 opsys=usg5-2-2
  ;;
  ## Intel 386 machines where we don't care about the manufacturer
  i[34]86-* )
    machine=intel386
    case "${configuration}" in
      *-isc1.* | *-isc2.[01]* )	opsys=386-ix ;;
      *-isc2.2 )		opsys=isc2-2 ;;
      *-isc* )			opsys=isc3-0 ;;
      *-esix* )			opsys=esix ;;
      *-xenix* )		opsys=xenix ;;
      *-linux* )		opsys=linux ;;
      *-sco3.2v4* )		opsys=sco4 ;;
      ## Otherwise, we'll fall through to the generic opsys code at the bottom.
    esac
  ;;

  ## Silicon Graphics machines
  ## Iris 2500 and Iris 2500 Turbo (aka the Iris 3030)
  m68*-sgi-iris3.5 )
    machine=irist opsys=iris3-5
  ;;
  m68*-sgi-iris3.6 | m68*-sgi-iris*)
    machine=irist opsys=iris3-6
  ;;
  ## Iris 4D
  mips-sgi-irix3.* )
    machine=iris4d opsys=irix3-3
  ;;
  mips-sgi-irix4.* | mips-sgi-irix* )
    machine=iris4d opsys=irix4-0
  ;;

  ## Masscomp machines
  m68*-masscomp-rtu )
    machine=masscomp opsys=rtu
  ;;

  ## Megatest machines
  m68*-megatest-bsd* )
    machine=mega68 opsys=bsd4-2
  ;;

  ## Workstations sold by MIPS
  ## This is not necessarily all workstations using the MIPS processor -
  ## Irises are produced by SGI, and DECstations by DEC.

  ## etc/MACHINES lists mips.h and mips4.h as possible machine files,
  ## and usg5-2-2 and bsd4-3 as possible OS files.  The only guidance
  ## it gives for choosing between the alternatives seems to be "Use
  ## -machine=mips4 for RISCOS version 4; use -opsystem=bsd4-3 with
  ## the BSD world."  I'll assume that these are instructions for
  ## handling two odd situations, and that every other situation
  ## should use mips.h and usg5-2-2, they being listed first.
  mips-mips-riscos4* )
    machine=mips4 opsys=usg5-2-2
  ;;
  mips-mips-bsd* )
    machine=mips opsys=bsd4-3
  ;;
  mips-mips-* )
    machine=mips opsys=usg5-2-2
  ;;

  ## NeXT
  m68*-next-mach* | m68*-next-bsd* )
    machine=next opsys=mach2
  ;;

  ## The complete machine from National Semiconductor
  ns32k-ns-genix* )
    machine=ns32000 opsys=usg5-2
  ;;

  ## NCR machines
  m68*-ncr-sysv2* | m68*-ncr-sysvr2* )
    machine=tower32 opsys=usg5-2-2
  ;;
  m68*-ncr-sysv3* | m68*-ncr-sysvr3* )
    machine=tower32v3 opsys=usg5-3
  ;;

  ## Nixdorf Targon 31
  m68*-nixdorf-sysv* )
    machine=targon31 opsys=usg5-2-2
  ;;

  ## Nu (TI or LMI)
  m68*-nu-sysv* )
    machine=nu opsys=usg5-2
  ;;

  ## Plexus
  m68*-plexus-sysv* )
    machine=plexus opsys=usg5-2
  ;;

  ## Prime EXL
  i386-prime-sysv* )
    machine=i386 opsys=usg5-3
  ;;

  ## Pyramid machines
  ## I don't really have any idea what sort of processor the Pyramid has,
  ## so I'm assuming it is its own architecture.
  pyramid-pyramid-bsd* )
    machine=pyramid opsys=bsd4-2
  ;;

  ## Sequent Balance
  ns32k-sequent-bsd4.2 )
    machine=sequent opsys=bsd4-2
  ;;
  ns32k-sequent-bsd4.3 )
    machine=sequent opsys=bsd4-3
  ;;
  ## Sequent Symmetry
  i386-sequent-bsd* )
    machine=symmetry opsys=bsd4-3
  ;;

  ## SONY machines
  m68*-sony-bsd4.2 )
    machine=news opsys=bsd4-2
  ;;
  m68*-sony-bsd4.3 )
    machine=news opsys=bsd4-3
  ;;
  mips-sony-bsd* )
    machine=news-risc opsys=bsd4-3
  ;;

  ## Stride
  m68*-stride-sysv* )
    machine=stride opsys=usg5-2
  ;;

  ## Suns
  *-sun-sunos* | *-sun-bsd* | *-sun-solaris* )
    case "${configuration}" in
      m68*-sunos1* )	machine=sun1 ;;
      m68*-sunos2* )	machine=sun2 ;;
      m68* )		machine=sun3 ;;
      i[34]86* )	machine=sun386 ;;
      sparc* )		machine=sparc ;;
      * )		unported=true ;;
    esac
    case "${configuration}" in
      *-sunos4.0*	  ) opsys=sunos4-0 ;;
      *-sunos4* | *-sunos ) opsys=sunos4-1 ;;
      *-sunos5* | *-solaris* ) opsys=sol2 ;;
      *			  ) opsys=bsd4-2   ;;
    esac
  ;;

  ## Tadpole 68k
  m68*-tadpole-sysv* )
    machine=tad68k opsys=usg5-3
  ;;

  ## Tahoe machines
  tahoe-tahoe-bsd4.2 )
    machine=tahoe opsys=bsd4-2
  ;;
  tahoe-tahoe-bsd4.3 )
    machine=tahoe opsys=bsd4-3
  ;;

  ## Tandem Integrity S2
  mips-tandem-sysv* )
    machine=tandem-s2 opsys=usg5-3
  ;;

  ## Tektronix 16000 box (6130?)
  ns16k-tektronix-bsd* )
    machine=ns16000 opsys=bsd4-2
  ;;
  ## Tektronix 4300
  ## src/m/tek4300.h hints that this is a m68k machine.
  m68*-tektronix-bsd* )
    machine=tex4300 opsys=bsd4-3
  ;;

  ## Titan P2 or P3
  ## We seem to have lost the machine-description file titan.h!
  titan-titan-sysv* )
    machine=titan opsys=usg5-3
  ;;
  
  ## Ustation E30 (SS5E)
  m68*-unisys-uniplus* )
    machine=ustation opsystem=unipl5-2
  ;;

  ## Vaxen.
  vax-dec-* )
    machine=vax
    case "${configuration}" in
      *-bsd4.1 ) 					opsys=bsd4-1 ;;
      *-bsd4.2 | *-ultrix[0-3].* | *-ultrix4.0 )	opsys=bsd4-2 ;;
      *-bsd4.3 | *-ultrix* ) 				opsys=bsd4-3 ;;
      *-sysv[01]* | *-sysvr[01]* ) 			opsys=usg5-0 ;;
      *-sysv2* | *-sysvr2* )				opsys=usg5-2 ;;
      *-vms* ) 						opsys=vms ;;
      * ) 						unported=true
    esac
  ;;

  ## Whitechapel MG1
  ns16k-whitechapel-* )
    machine=mg1
    ## We don't know what sort of OS runs on these; we'll let the
    ## operating system guessing code below try.
  ;;

  ## Wicat
  m68*-wicat-sysv* )
    machine=wicat opsys=usg5-2
  ;;

  * )
    unported=true
  ;;
esac

### If the code above didn't choose an operating system, just choose
### an operating system based on the configuration name.  You really
### only want to use this when you have no idea what the right
### operating system is; if you know what operating systems a machine
### runs, it's cleaner to make it explicit in the case statement
### above.
if [ ! "${opsys}" ]; then
  case "${configuration}" in
    *-bsd4.[01] )	opsys=bsd4-1 ;;
    *-bsd4.2 )		opsys=bsd4-2 ;;
    *-bsd4.3 )		opsys=bsd4-3 ;;
    *-sysv0 | *-sysvr0 )		opsys=usg5-0 ;;
    *-sysv2 | *-sysvr2 )		opsys=usg5-2 ;;
    *-sysv2.2 | *-sysvr2.2 )		opsys=usg5-2-2 ;;
    *-sysv3 | *-sysvr3 )		opsys=usg5-3 ;;
    *-sysv4 | *-sysvr4 )		opsys=usg5-4 ;;
    * )
      unported=true
    ;;
  esac
fi

if $unported ; then
  (echo "${progname}: Emacs hasn't been ported to \`${configuration}' systems."
   echo "${progname}: Check \`etc/MACHINES' for recognized configuration names."
  ) >&2
  exit 1
fi

machfile="m/${machine}.h"
opsysfile="s/${opsys}.h"


trap 'rm -f conftest* core; exit 1' 1 3 15

# Needed for some versions of `tr' so that character classes in `[]' work.
if test "${LANG+set}" = "set" ; then
   LANG=C
fi

rm -f conftest*
compile='${CC-cc} $CFLAGS $DEFS conftest.c -o conftest $LIBS >/dev/null 2>&1'

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
unique_file=lisp

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  srcdirdefaulted=yes
  # Try the directory containing this script, then `..'.
  prog=$0
  confdir=`echo $prog|sed 's%/[^/][^/]*$%%'`
  test "X$confdir" = "X$prog" && confdir=.
  srcdir=$confdir
  if test ! -r $srcdir/$unique_file; then
    srcdir=..
  fi
fi
if test ! -r $srcdir/$unique_file; then
  if test x$srcdirdefaulted = xyes; then
    echo "configure: Can not find sources in \`${confdir}' or \`..'." 1>&2
  else
    echo "configure: Can not find sources in \`${srcdir}'." 1>&2
  fi
  exit 1
fi
# Preserve a srcdir of `.' to avoid automounter screwups with pwd.
# But we can't avoid them for `..', to make subdirectories work.
case $srcdir in
  .|/*|~*) ;;
  *) srcdir=`cd $srcdir; pwd` ;; # Make relative path absolute.
esac




#### Choose a compiler.
case ${with_gcc} in
  "yes" ) CC="gcc" GCC=1 ;;
  "no"  ) CC="cc"        ;;
  * )
     if test -z "$CC"; then
  # Extract the first word of `gcc', so it can be a program name with args.
  set dummy gcc; word=$2
  echo checking for $word
  IFS="${IFS= 	}"; saveifs="$IFS"; IFS="${IFS}:"
  for dir in $PATH; do
    test -z "$dir" && dir=.
    if test -f $dir/$word; then
      CC="gcc"
      break
    fi
  done
  IFS="$saveifs"
fi
test -z "$CC" && CC="cc"
test -n "$CC" -a -n "$verbose" && echo "	setting CC to $CC"

# Find out if we are using GNU C, under whatever name.
cat > conftest.c <<EOF
#ifdef __GNUC__
  yes
#endif
EOF
${CC-cc} -E conftest.c > conftest.out 2>&1
if egrep yes conftest.out >/dev/null 2>&1; then
  GCC=1 # For later tests.
fi
rm -f conftest*
 
esac

CFLAGS='-g'
if test -n "${GCC}"; then
  CFLAGS='-g -O'
fi

#### Some other nice autoconf tests.  If you add a test here which
#### should make an entry in src/config.h, don't forget to add an
#### #undef clause to src/config.h.in for autoconf to modify.

echo checking for ln -s
rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  LN_S="ln -s"
else
  LN_S=ln
fi


echo checking how to run the C preprocessor
if test -z "$CPP"; then
  CPP='${CC-cc} -E'
  cat > conftest.c <<EOF
#include <stdio.h>
EOF
err=`eval "($CPP \$DEFS conftest.c >/dev/null) 2>&1"`
if test -z "$err"; then
  :
else
  CPP=/lib/cpp
fi
rm -f conftest*
fi



for hdr in sys/timeb.h sys/time.h
do
trhdr=HAVE_`echo $hdr | tr '[a-z]./' '[A-Z]__'`
echo checking for ${hdr}
cat > conftest.c <<EOF
#include <${hdr}>
EOF
err=`eval "($CPP \$DEFS conftest.c >/dev/null) 2>&1"`
if test -z "$err"; then
  {
test -n "$verbose" && \
echo '	defining' ${trhdr}
DEFS="$DEFS -D${trhdr}=1"
SEDDEFS="${SEDDEFS}\${SEDdA}${trhdr}\${SEDdB}${trhdr}\${SEDdC}1\${SEDdD}
\${SEDuA}${trhdr}\${SEDuB}${trhdr}\${SEDuC}1\${SEDuD}
\${SEDeA}${trhdr}\${SEDeB}${trhdr}\${SEDeC}1\${SEDeD}
"
}

fi
rm -f conftest*
done

echo checking for ANSI C header files
cat > conftest.c <<EOF
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
err=`eval "($CPP \$DEFS conftest.c >/dev/null) 2>&1"`
if test -z "$err"; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
echo '#include <string.h>' > conftest.c
eval "$CPP \$DEFS conftest.c > conftest.out 2>&1"
if egrep "memchr" conftest.out >/dev/null 2>&1; then
  # SGI's /bin/cc from Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
cat > conftest.c <<EOF
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e,f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }

EOF
eval $compile
if test -s conftest && (./conftest; exit) 2>/dev/null; then
  {
test -n "$verbose" && \
echo '	defining' STDC_HEADERS
DEFS="$DEFS -DSTDC_HEADERS=1"
SEDDEFS="${SEDDEFS}\${SEDdA}STDC_HEADERS\${SEDdB}STDC_HEADERS\${SEDdC}1\${SEDdD}
\${SEDuA}STDC_HEADERS\${SEDuB}STDC_HEADERS\${SEDuC}1\${SEDuD}
\${SEDeA}STDC_HEADERS\${SEDeB}STDC_HEADERS\${SEDeC}1\${SEDeD}
"
}

fi
rm -f conftest*
fi
rm -f conftest*

fi
rm -f conftest*

echo checking for whether time.h and sys/time.h may both be included
cat > conftest.c <<EOF
#include <sys/types.h>
#include <sys/time.h>
#include <time.h>
int main() { exit(0); }
int t() { struct tm *tp; }
EOF
if eval $compile; then
  {
test -n "$verbose" && \
echo '	defining' TIME_WITH_SYS_TIME
DEFS="$DEFS -DTIME_WITH_SYS_TIME=1"
SEDDEFS="${SEDDEFS}\${SEDdA}TIME_WITH_SYS_TIME\${SEDdB}TIME_WITH_SYS_TIME\${SEDdC}1\${SEDdD}
\${SEDuA}TIME_WITH_SYS_TIME\${SEDuB}TIME_WITH_SYS_TIME\${SEDuC}1\${SEDuD}
\${SEDeA}TIME_WITH_SYS_TIME\${SEDeB}TIME_WITH_SYS_TIME\${SEDeC}1\${SEDeD}
"
}

fi
rm -f conftest*


echo checking for return type of signal handlers
cat > conftest.c <<EOF
#include <sys/types.h>
#include <signal.h>
#ifdef signal
#undef signal
#endif
extern void (*signal ()) ();
int main() { exit(0); }
int t() { int i; }
EOF
if eval $compile; then
  {
test -n "$verbose" && \
echo '	defining' RETSIGTYPE to be 'void'
DEFS="$DEFS -DRETSIGTYPE=void"
SEDDEFS="${SEDDEFS}\${SEDdA}RETSIGTYPE\${SEDdB}RETSIGTYPE\${SEDdC}void\${SEDdD}
\${SEDuA}RETSIGTYPE\${SEDuB}RETSIGTYPE\${SEDuC}void\${SEDuD}
\${SEDeA}RETSIGTYPE\${SEDeB}RETSIGTYPE\${SEDeC}void\${SEDeD}
"
}

else
  {
test -n "$verbose" && \
echo '	defining' RETSIGTYPE to be 'int'
DEFS="$DEFS -DRETSIGTYPE=int"
SEDDEFS="${SEDDEFS}\${SEDdA}RETSIGTYPE\${SEDdB}RETSIGTYPE\${SEDdC}int\${SEDdD}
\${SEDuA}RETSIGTYPE\${SEDuB}RETSIGTYPE\${SEDuC}int\${SEDuD}
\${SEDeA}RETSIGTYPE\${SEDeB}RETSIGTYPE\${SEDeC}int\${SEDeD}
"
}

fi
rm -f conftest*



# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments.  Useless!
echo checking for working alloca.h
cat > conftest.c <<EOF
#include <alloca.h>
int main() { exit(0); }
int t() { char *p = alloca(2 * sizeof(int)); }
EOF
if eval $compile; then
  {
test -n "$verbose" && \
echo '	defining' HAVE_ALLOCA_H
DEFS="$DEFS -DHAVE_ALLOCA_H=1"
SEDDEFS="${SEDDEFS}\${SEDdA}HAVE_ALLOCA_H\${SEDdB}HAVE_ALLOCA_H\${SEDdC}1\${SEDdD}
\${SEDuA}HAVE_ALLOCA_H\${SEDuB}HAVE_ALLOCA_H\${SEDuC}1\${SEDuD}
\${SEDeA}HAVE_ALLOCA_H\${SEDeB}HAVE_ALLOCA_H\${SEDeC}1\${SEDeD}
"
}

fi
rm -f conftest*

decl="#ifdef __GNUC__
#define alloca __builtin_alloca
#else
#if HAVE_ALLOCA_H
#include <alloca.h>
#else
#ifdef _AIX
 #pragma alloca
#else
char *alloca ();
#endif
#endif
#endif
"
echo checking for alloca
cat > conftest.c <<EOF
$decl
int main() { exit(0); }
int t() { char *p = (char *) alloca(1); }
EOF
if eval $compile; then
  :
else
  alloca_missing=1
cat > conftest.c <<EOF

#if defined(CRAY) && ! defined(CRAY2)
winnitude
#else
lossage
#endif

EOF
eval "$CPP \$DEFS conftest.c > conftest.out 2>&1"
if egrep "winnitude" conftest.out >/dev/null 2>&1; then
  echo checking for _getb67
cat > conftest.c <<EOF
#include <ctype.h>
int main() { exit(0); }
int t() { 
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub__getb67) || defined (__stub____getb67)
choke me
#else
/* Override any gcc2 internal prototype to avoid an error.  */
extern char _getb67(); _getb67();
#endif
 }
EOF
if eval $compile; then
  {
test -n "$verbose" && \
echo '	defining' CRAY_STACKSEG_END to be '_getb67'
DEFS="$DEFS -DCRAY_STACKSEG_END=_getb67"
SEDDEFS="${SEDDEFS}\${SEDdA}CRAY_STACKSEG_END\${SEDdB}CRAY_STACKSEG_END\${SEDdC}_getb67\${SEDdD}
\${SEDuA}CRAY_STACKSEG_END\${SEDuB}CRAY_STACKSEG_END\${SEDuC}_getb67\${SEDuD}
\${SEDeA}CRAY_STACKSEG_END\${SEDeB}CRAY_STACKSEG_END\${SEDeC}_getb67\${SEDeD}
"
}

else
  echo checking for GETB67
cat > conftest.c <<EOF
#include <ctype.h>
int main() { exit(0); }
int t() { 
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_GETB67) || defined (__stub___GETB67)
choke me
#else
/* Override any gcc2 internal prototype to avoid an error.  */
extern char GETB67(); GETB67();
#endif
 }
EOF
if eval $compile; then
  {
test -n "$verbose" && \
echo '	defining' CRAY_STACKSEG_END to be 'GETB67'
DEFS="$DEFS -DCRAY_STACKSEG_END=GETB67"
SEDDEFS="${SEDDEFS}\${SEDdA}CRAY_STACKSEG_END\${SEDdB}CRAY_STACKSEG_END\${SEDdC}GETB67\${SEDdD}
\${SEDuA}CRAY_STACKSEG_END\${SEDuB}CRAY_STACKSEG_END\${SEDuC}GETB67\${SEDuD}
\${SEDeA}CRAY_STACKSEG_END\${SEDeB}CRAY_STACKSEG_END\${SEDeC}GETB67\${SEDeD}
"
}

else
  echo checking for getb67
cat > conftest.c <<EOF
#include <ctype.h>
int main() { exit(0); }
int t() { 
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_getb67) || defined (__stub___getb67)
choke me
#else
/* Override any gcc2 internal prototype to avoid an error.  */
extern char getb67(); getb67();
#endif
 }
EOF
if eval $compile; then
  {
test -n "$verbose" && \
echo '	defining' CRAY_STACKSEG_END to be 'getb67'
DEFS="$DEFS -DCRAY_STACKSEG_END=getb67"
SEDDEFS="${SEDDEFS}\${SEDdA}CRAY_STACKSEG_END\${SEDdB}CRAY_STACKSEG_END\${SEDdC}getb67\${SEDdD}
\${SEDuA}CRAY_STACKSEG_END\${SEDuB}CRAY_STACKSEG_END\${SEDuC}getb67\${SEDuD}
\${SEDeA}CRAY_STACKSEG_END\${SEDeB}CRAY_STACKSEG_END\${SEDeC}getb67\${SEDeD}
"
}

fi
rm -f conftest*

fi
rm -f conftest*

fi
rm -f conftest*

fi
rm -f conftest*


fi
rm -f conftest*

if test -n "$alloca_missing"; then
  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
  # that cause trouble.  Some versions do not even contain alloca or
  # contain a buggy version.  If you still want to use their alloca,
  # use ar to extract alloca.o from them instead of compiling alloca.c.
  ALLOCA=alloca.o

  echo 'checking stack direction for C alloca'
  echo checking whether cross-compiling
# If we cannot run a trivial program, we must be cross compiling.
cat > conftest.c <<EOF
main(){exit(0);}
EOF
eval $compile
if test -s conftest && (./conftest; exit) 2>/dev/null; then
  :
else
  cross_compiling=1
fi
rm -f conftest*

if test -n "$cross_compiling"
then
  {
test -n "$verbose" && \
echo '	defining' STACK_DIRECTION to be '0'
DEFS="$DEFS -DSTACK_DIRECTION=0"
SEDDEFS="${SEDDEFS}\${SEDdA}STACK_DIRECTION\${SEDdB}STACK_DIRECTION\${SEDdC}0\${SEDdD}
\${SEDuA}STACK_DIRECTION\${SEDuB}STACK_DIRECTION\${SEDuC}0\${SEDuD}
\${SEDeA}STACK_DIRECTION\${SEDeB}STACK_DIRECTION\${SEDeC}0\${SEDeD}
"
}

else
cat > conftest.c <<EOF
find_stack_direction ()
{
  static char *addr = 0;
  auto char dummy;
  if (addr == 0)
    {
      addr = &dummy;
      return find_stack_direction ();
    }
  else
    return (&dummy > addr) ? 1 : -1;
}
main ()
{
  exit (find_stack_direction() < 0);
}
EOF
eval $compile
if test -s conftest && (./conftest; exit) 2>/dev/null; then
  {
test -n "$verbose" && \
echo '	defining' STACK_DIRECTION to be '1'
DEFS="$DEFS -DSTACK_DIRECTION=1"
SEDDEFS="${SEDDEFS}\${SEDdA}STACK_DIRECTION\${SEDdB}STACK_DIRECTION\${SEDdC}1\${SEDdD}
\${SEDuA}STACK_DIRECTION\${SEDuB}STACK_DIRECTION\${SEDuC}1\${SEDuD}
\${SEDeA}STACK_DIRECTION\${SEDeB}STACK_DIRECTION\${SEDeC}1\${SEDeD}
"
}

else
  {
test -n "$verbose" && \
echo '	defining' STACK_DIRECTION to be '-1'
DEFS="$DEFS -DSTACK_DIRECTION=-1"
SEDDEFS="${SEDDEFS}\${SEDdA}STACK_DIRECTION\${SEDdB}STACK_DIRECTION\${SEDdC}-1\${SEDdD}
\${SEDuA}STACK_DIRECTION\${SEDuB}STACK_DIRECTION\${SEDuC}-1\${SEDuD}
\${SEDeA}STACK_DIRECTION\${SEDeB}STACK_DIRECTION\${SEDeC}-1\${SEDeD}
"
}

fi
fi
rm -f conftest*
fi

for func in gettimeofday gethostname dup2
do
trfunc=HAVE_`echo $func | tr '[a-z]' '[A-Z]'`
echo checking for ${func}
cat > conftest.c <<EOF
#include <ctype.h>
int main() { exit(0); }
int t() { 
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_${func}) || defined (__stub___${func})
choke me
#else
/* Override any gcc2 internal prototype to avoid an error.  */
extern char ${func}(); ${func}();
#endif
 }
EOF
if eval $compile; then
  {
test -n "$verbose" && \
echo '	defining' ${trfunc}
DEFS="$DEFS -D${trfunc}=1"
SEDDEFS="${SEDDEFS}\${SEDdA}${trfunc}\${SEDdB}${trfunc}\${SEDdC}1\${SEDdD}
\${SEDuA}${trfunc}\${SEDuB}${trfunc}\${SEDuC}1\${SEDuD}
\${SEDeA}${trfunc}\${SEDeB}${trfunc}\${SEDeC}1\${SEDeD}
"
}

fi
rm -f conftest*
done


echo checking for struct tm in time.h
cat > conftest.c <<EOF
#include <sys/types.h>
#include <time.h>
int main() { exit(0); }
int t() { struct tm *tp; }
EOF
if eval $compile; then
  :
else
  {
test -n "$verbose" && \
echo '	defining' TM_IN_SYS_TIME
DEFS="$DEFS -DTM_IN_SYS_TIME=1"
SEDDEFS="${SEDDEFS}\${SEDdA}TM_IN_SYS_TIME\${SEDdB}TM_IN_SYS_TIME\${SEDdC}1\${SEDdD}
\${SEDuA}TM_IN_SYS_TIME\${SEDuB}TM_IN_SYS_TIME\${SEDuC}1\${SEDuD}
\${SEDeA}TM_IN_SYS_TIME\${SEDeB}TM_IN_SYS_TIME\${SEDeC}1\${SEDeD}
"
}

fi
rm -f conftest*

decl='#include <sys/types.h>
'
case "$DEFS" in
  *TM_IN_SYS_TIME*) decl="$decl
#include <sys/time.h>
" ;;
  *) decl="$decl
#include <time.h>
" ;;
esac
echo checking for tm_zone in struct tm
cat > conftest.c <<EOF
$decl
int main() { exit(0); }
int t() { struct tm tm; tm.tm_zone; }
EOF
if eval $compile; then
  {
test -n "$verbose" && \
echo '	defining' HAVE_TM_ZONE
DEFS="$DEFS -DHAVE_TM_ZONE=1"
SEDDEFS="${SEDDEFS}\${SEDdA}HAVE_TM_ZONE\${SEDdB}HAVE_TM_ZONE\${SEDdC}1\${SEDdD}
\${SEDuA}HAVE_TM_ZONE\${SEDuB}HAVE_TM_ZONE\${SEDuC}1\${SEDuD}
\${SEDeA}HAVE_TM_ZONE\${SEDeB}HAVE_TM_ZONE\${SEDeC}1\${SEDeD}
"
}

else
  no_tm_zone=1
fi
rm -f conftest*

if test -n "$no_tm_zone"; then
echo checking for tzname
cat > conftest.c <<EOF
#include <time.h>
#ifndef tzname /* For SGI.  */
extern char *tzname[]; /* RS6000 and others want it this way.  */
#endif
int main() { exit(0); }
int t() { atoi(*tzname); }
EOF
if eval $compile; then
  {
test -n "$verbose" && \
echo '	defining' HAVE_TZNAME
DEFS="$DEFS -DHAVE_TZNAME=1"
SEDDEFS="${SEDDEFS}\${SEDdA}HAVE_TZNAME\${SEDdB}HAVE_TZNAME\${SEDdC}1\${SEDdD}
\${SEDuA}HAVE_TZNAME\${SEDuB}HAVE_TZNAME\${SEDuC}1\${SEDuD}
\${SEDeA}HAVE_TZNAME\${SEDeB}HAVE_TZNAME\${SEDeC}1\${SEDeD}
"
}

fi
rm -f conftest*

fi


prog='/* Ultrix mips cc rejects this.  */
typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this.  */
char const *const *ccp;
char **p;
/* AIX XL C 1.02.0.0 rejects this.
   It does not let you subtract one const X* pointer from another in an arm
   of an if-expression whose if-part is not a constant expression */
const char *g = "string";
p = &g + (g ? g-g : 0);
/* HPUX 7.0 cc rejects these. */
++ccp;
p = (char**) ccp;
ccp = (char const *const *) p;
{ /* SCO 3.2v4 cc rejects this.  */
  char *t;
  char const *s = 0 ? (char *) 0 : (char const *) 0;

  *t++ = 0;
}
{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
  int x[] = {25,17};
  const int *foo = &x[0];
  ++foo;
}
{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
  typedef const int *iptr;
  iptr p = 0;
  ++p;
}
{ /* AIX XL C 1.02.0.0 rejects this saying
     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
  struct s { int j; const int *ap[3]; };
  struct s *b; b->j = 5;
}'
echo checking for working const
cat > conftest.c <<EOF

int main() { exit(0); }
int t() { $prog }
EOF
if eval $compile; then
  :
else
  {
test -n "$verbose" && \
echo '	defining' const to be 'empty'
DEFS="$DEFS -Dconst="
SEDDEFS="${SEDDEFS}\${SEDdA}const\${SEDdB}const\${SEDdC}\${SEDdD}
\${SEDuA}const\${SEDuB}const\${SEDuC}\${SEDuD}
\${SEDeA}const\${SEDeB}const\${SEDeC}\${SEDeD}
"
}

fi
rm -f conftest*






#### Choose a window system.
echo "Checking window system."

window_system=''
case "${with_x}" in
  yes )
    window_system=${window_system}x11
  ;;
  no )
    window_system=${window_system}none
esac
case "${with_x11}" in
  yes )
    window_system=${window_system}x11
  ;;
esac
case "${with_x10}" in
  yes )
    window_system=${window_system}x10
  ;;
esac

case "${window_system}" in
  "none" | "x11" | "x10" ) ;;
  "" )
    echo "  No window system specifed.  Looking for X Windows."
    window_system=none
    if [ -r /usr/lib/libX11.a \
	 -o -d /usr/include/X11 \
         -o -d /usr/X386/include \
	 -o -d ${x_includes}/X11 ]; then
      window_system=x11
    fi
  ;;
  * )
    echo "Don\'t specify the window system more than once." >&2
    exit 1
  ;;
esac

case "${window_system}" in
  x11 )
    HAVE_X_WINDOWS=yes
    HAVE_X11=yes
    echo "  Using X11."
  ;;
  x10 )
    HAVE_X_WINDOWS=yes
    HAVE_X11=no
    echo "  Using X10."
  ;;
  none )
    HAVE_X_WINDOWS=no
    HAVE_X11=no
    echo "  Using no window system."
  ;;
esac

### If we're using X11, we should use the X menu package.
HAVE_X_MENU=no
case ${HAVE_X11} in
  yes )
    HAVE_X_MENU=yes
  ;;
esac

### Check for XFree386.  It needs special hacks.
lib_havexbsd=no

LIBS_save="${LIBS}"
LIBS="${LIBS} -lXbsd "
have_lib=""
echo checking for -lXbsd 
cat > conftest.c <<EOF

int main() { exit(0); }
int t() { main(); }
EOF
if eval $compile; then
  have_lib="1"
fi
rm -f conftest*
LIBS="${LIBS_save}"
if test -n "${have_lib}"; then
   :; have_libxbsd=yes 
else
   :; have_libxbsd=no 
fi


if [ -n "${x_libraries}" ] && [ -f ${x_libraries}/libXbsd.a ]; then
  have_libxbsd=yes
fi

case ${window_system} in
  x11 )
    if [ -d /usr/X386/include ] && [ "${have_libxbsd}" = "yes" ]; then
      HAVE_XFREE386=yes
      if [ "${C_SWITCH_X_SITE}" = "" ]; then
	C_SWITCH_X_SITE="-I/usr/X386/include"
      fi
    fi
  ;;
esac

#### Extract some information from the operating system and machine files.

echo "Examining the machine- and system-dependent files to find out"
echo " - which libraries the lib-src programs will want, and"
echo " - whether the GNU malloc routines are usable."

### It's not important that this name contain the PID; you can't run
### two configures in the same directory and have anything work
### anyway.
tempcname="conftest.c"

echo '
#include "'${srcdir}'/src/'${opsysfile}'"
#include "'${srcdir}'/src/'${machfile}'"
#ifndef LIBS_MACHINE
#define LIBS_MACHINE
#endif
#ifndef LIBS_SYSTEM
#define LIBS_SYSTEM
#endif
#ifndef C_SWITCH_SYSTEM
#define C_SWITCH_SYSTEM
#endif
@configure@ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM
@configure@ c_switch_system=C_SWITCH_SYSTEM
#ifdef SYSTEM_MALLOC
@configure@ system_malloc=yes
#else
@configure@ system_malloc=no
#endif
' > ${tempcname}
# The value of CPP is a quoted variable reference, so we need to do this
# to get its actual value...
foo=`eval "echo $CPP"`
eval `${foo} ${tempcname} \
       | grep '@configure@' \
       | sed -e 's/^@configure@ \([^=]*=\)\(.*\)$/\1"\2"/'`
rm ${tempcname}


# Do the opsystem or machine files prohibit the use of the GNU malloc?
# Assume not, until told otherwise.
GNU_MALLOC=yes
if [ "${system_malloc}" = "yes" ]; then
  GNU_MALLOC=no
  GNU_MALLOC_reason="
  (The GNU allocators don't work with this system configuration.)"
fi

if [ ! "${REL_ALLOC}" ]; then
  REL_ALLOC=${GNU_MALLOC}
fi

LISP_FLOAT_TYPE=yes


#### Find out which version of Emacs this is.
version=`grep 'defconst[	 ]*emacs-version' ${srcdir}/lisp/version.el \
	 | sed -e 's/^.*"\([0-9][0-9]*\.[0-9][0-9]*\)\..*$/\1/'`
if [ ! "${version}" ]; then
  echo "${progname}: can't find current emacs version in
	\`${srcdir}/lisp/version.el'." >&2
  exit 1
fi


#### Specify what sort of things we'll be editing into Makefile and config.h.












{
test -n "$verbose" && \
echo '	defining' config_machfile to be '"\"${machfile}\""'
DEFS="$DEFS -Dconfig_machfile="\"${machfile}\"""
SEDDEFS="${SEDDEFS}\${SEDdA}config_machfile\${SEDdB}config_machfile\${SEDdC}"\"${machfile}\""\${SEDdD}
\${SEDuA}config_machfile\${SEDuB}config_machfile\${SEDuC}"\"${machfile}\""\${SEDuD}
\${SEDeA}config_machfile\${SEDeB}config_machfile\${SEDeC}"\"${machfile}\""\${SEDeD}
"
}

{
test -n "$verbose" && \
echo '	defining' config_opsysfile to be '"\"${opsysfile}\""'
DEFS="$DEFS -Dconfig_opsysfile="\"${opsysfile}\"""
SEDDEFS="${SEDDEFS}\${SEDdA}config_opsysfile\${SEDdB}config_opsysfile\${SEDdC}"\"${opsysfile}\""\${SEDdD}
\${SEDuA}config_opsysfile\${SEDuB}config_opsysfile\${SEDuC}"\"${opsysfile}\""\${SEDuD}
\${SEDeA}config_opsysfile\${SEDeB}config_opsysfile\${SEDeC}"\"${opsysfile}\""\${SEDeD}
"
}

{
test -n "$verbose" && \
echo '	defining' LD_SWITCH_X_SITE to be '${LD_SWITCH_X_SITE}'
DEFS="$DEFS -DLD_SWITCH_X_SITE=${LD_SWITCH_X_SITE}"
SEDDEFS="${SEDDEFS}\${SEDdA}LD_SWITCH_X_SITE\${SEDdB}LD_SWITCH_X_SITE\${SEDdC}${LD_SWITCH_X_SITE}\${SEDdD}
\${SEDuA}LD_SWITCH_X_SITE\${SEDuB}LD_SWITCH_X_SITE\${SEDuC}${LD_SWITCH_X_SITE}\${SEDuD}
\${SEDeA}LD_SWITCH_X_SITE\${SEDeB}LD_SWITCH_X_SITE\${SEDeC}${LD_SWITCH_X_SITE}\${SEDeD}
"
}

{
test -n "$verbose" && \
echo '	defining' C_SWITCH_X_SITE to be '${C_SWITCH_X_SITE}'
DEFS="$DEFS -DC_SWITCH_X_SITE=${C_SWITCH_X_SITE}"
SEDDEFS="${SEDDEFS}\${SEDdA}C_SWITCH_X_SITE\${SEDdB}C_SWITCH_X_SITE\${SEDdC}${C_SWITCH_X_SITE}\${SEDdD}
\${SEDuA}C_SWITCH_X_SITE\${SEDuB}C_SWITCH_X_SITE\${SEDuC}${C_SWITCH_X_SITE}\${SEDuD}
\${SEDeA}C_SWITCH_X_SITE\${SEDeB}C_SWITCH_X_SITE\${SEDeC}${C_SWITCH_X_SITE}\${SEDeD}
"
}



if [ "${HAVE_X_WINDOWS}" = "yes" ] ; then
   {
test -n "$verbose" && \
echo '	defining' HAVE_X_WINDOWS
DEFS="$DEFS -DHAVE_X_WINDOWS=1"
SEDDEFS="${SEDDEFS}\${SEDdA}HAVE_X_WINDOWS\${SEDdB}HAVE_X_WINDOWS\${SEDdC}1\${SEDdD}
\${SEDuA}HAVE_X_WINDOWS\${SEDuB}HAVE_X_WINDOWS\${SEDuC}1\${SEDuD}
\${SEDeA}HAVE_X_WINDOWS\${SEDeB}HAVE_X_WINDOWS\${SEDeC}1\${SEDeD}
"
}
 
fi
if [ "${HAVE_X11}" = "yes" ] ; then
   {
test -n "$verbose" && \
echo '	defining' HAVE_X11
DEFS="$DEFS -DHAVE_X11=1"
SEDDEFS="${SEDDEFS}\${SEDdA}HAVE_X11\${SEDdB}HAVE_X11\${SEDdC}1\${SEDdD}
\${SEDuA}HAVE_X11\${SEDuB}HAVE_X11\${SEDuC}1\${SEDuD}
\${SEDeA}HAVE_X11\${SEDeB}HAVE_X11\${SEDeC}1\${SEDeD}
"
}
 
fi
if [ "${HAVE_XFREE386}" = "yes" ] ; then
   {
test -n "$verbose" && \
echo '	defining' HAVE_XFREE386
DEFS="$DEFS -DHAVE_XFREE386=1"
SEDDEFS="${SEDDEFS}\${SEDdA}HAVE_XFREE386\${SEDdB}HAVE_XFREE386\${SEDdC}1\${SEDdD}
\${SEDuA}HAVE_XFREE386\${SEDuB}HAVE_XFREE386\${SEDuC}1\${SEDuD}
\${SEDeA}HAVE_XFREE386\${SEDeB}HAVE_XFREE386\${SEDeC}1\${SEDeD}
"
}
 
fi
if [ "${HAVE_X_MENU}" = "yes" ] ; then
   {
test -n "$verbose" && \
echo '	defining' HAVE_X_MENU
DEFS="$DEFS -DHAVE_X_MENU=1"
SEDDEFS="${SEDDEFS}\${SEDdA}HAVE_X_MENU\${SEDdB}HAVE_X_MENU\${SEDdC}1\${SEDdD}
\${SEDuA}HAVE_X_MENU\${SEDuB}HAVE_X_MENU\${SEDuC}1\${SEDuD}
\${SEDeA}HAVE_X_MENU\${SEDeB}HAVE_X_MENU\${SEDeC}1\${SEDeD}
"
}
 
fi
if [ "${GNU_MALLOC}" = "yes" ] ; then
   {
test -n "$verbose" && \
echo '	defining' GNU_MALLOC
DEFS="$DEFS -DGNU_MALLOC=1"
SEDDEFS="${SEDDEFS}\${SEDdA}GNU_MALLOC\${SEDdB}GNU_MALLOC\${SEDdC}1\${SEDdD}
\${SEDuA}GNU_MALLOC\${SEDuB}GNU_MALLOC\${SEDuC}1\${SEDuD}
\${SEDeA}GNU_MALLOC\${SEDeB}GNU_MALLOC\${SEDeC}1\${SEDeD}
"
}
 
fi
if [ "${REL_ALLOC}" = "yes" ] ; then
   {
test -n "$verbose" && \
echo '	defining' REL_ALLOC
DEFS="$DEFS -DREL_ALLOC=1"
SEDDEFS="${SEDDEFS}\${SEDdA}REL_ALLOC\${SEDdB}REL_ALLOC\${SEDdC}1\${SEDdD}
\${SEDuA}REL_ALLOC\${SEDuB}REL_ALLOC\${SEDuC}1\${SEDuD}
\${SEDeA}REL_ALLOC\${SEDeB}REL_ALLOC\${SEDeC}1\${SEDeD}
"
}
 
fi
if [ "${LISP_FLOAT_TYPE}" = "yes" ] ; then
   {
test -n "$verbose" && \
echo '	defining' LISP_FLOAT_TYPE
DEFS="$DEFS -DLISP_FLOAT_TYPE=1"
SEDDEFS="${SEDDEFS}\${SEDdA}LISP_FLOAT_TYPE\${SEDdB}LISP_FLOAT_TYPE\${SEDdC}1\${SEDdD}
\${SEDuA}LISP_FLOAT_TYPE\${SEDuB}LISP_FLOAT_TYPE\${SEDuC}1\${SEDuD}
\${SEDeA}LISP_FLOAT_TYPE\${SEDeB}LISP_FLOAT_TYPE\${SEDeC}1\${SEDeD}
"
}
 
fi


#### Report on what we decided to do.
echo "

Configured for \`${configuration}'.

  What operating system and machine description files should Emacs use?
        \`${opsysfile}' and \`${machfile}'
  What compiler should emacs be built with?               ${CC} ${CFLAGS}
  Should Emacs use the GNU version of malloc?             ${GNU_MALLOC}${GNU_MALLOC_reason}
  Should Emacs use the relocating allocator for buffers?  ${REL_ALLOC}
  What window system should Emacs use?                    ${window_system}${x_includes+
  Where do we find X Windows header files?                }${x_includes}${x_libraries+
  Where do we find X Windows libraries?                   }${x_libraries}

"

### Restore the arguments to this script, so autoconf can record them
### in the config.status file.
set - ${arguments}

if test -n "$prefix"; then
  test -z "$exec_prefix" && exec_prefix='${prefix}'
  prsub="s%^prefix\\([ 	]*\\)=\\([ 	]*\\).*$%prefix\\1=\\2$prefix%"
fi
if test -n "$exec_prefix"; then
  prsub="$prsub
s%^exec_prefix\\([ 	]*\\)=\\([ 	]*\\).*$%\
exec_prefix\\1=\\2$exec_prefix%"
fi
DEFS="`echo \"$DEFS\" | sed 's%[&\\\]%\\\&%g'`"

trap 'rm -f config.status; exit 1' 1 3 15
echo creating config.status
rm -f config.status
cat > config.status <<EOF
#!/bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $*

for arg
do
  case "\$arg" in
    -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    exec /bin/sh $0 $* ;;
    *) echo "Usage: config.status --recheck" 2>&1; exit 1 ;;
  esac
done

trap 'rm -f Makefile src/config.h conftest*; exit 1' 1 3 15
CC='$CC'
LN_S='$LN_S'
CPP='$CPP'
ALLOCA='$ALLOCA'
configuration='$configuration'
version='$version'
srcdir='$srcdir'
c_switch_system='$c_switch_system'
libsrc_libs='$libsrc_libs'
rip_paths='$rip_paths'
inst_paths='$inst_paths'
LD_SWITCH_X_SITE='$LD_SWITCH_X_SITE'
C_SWITCH_X_SITE='$C_SWITCH_X_SITE'
CFLAGS='$CFLAGS'
LIBS='$LIBS'
prefix='$prefix'
exec_prefix='$exec_prefix'
prsub='$prsub'
EOF
cat >> config.status <<\EOF

top_srcdir=$srcdir

# Allow make-time overrides of the generated file list.
test -n "$gen_files" || gen_files="Makefile"

for file in .. $gen_files; do if [ "x$file" != "x.." ]; then
  srcdir=$top_srcdir
  # Remove last slash and all that follows it.  Not all systems have dirname.
  dir=`echo $file|sed 's%/[^/][^/]*$%%'`
  if test "$dir" != "$file"; then
    test "$top_srcdir" != . && srcdir=$top_srcdir/$dir
    test ! -d $dir && mkdir $dir
  fi
  echo creating $file
  rm -f $file
  echo "# Generated automatically from `echo $file|sed 's|.*/||'`.in by configure." > $file
  sed -e "
$prsub
s%@CC@%$CC%g
s%@LN_S@%$LN_S%g
s%@CPP@%$CPP%g
s%@ALLOCA@%$ALLOCA%g
s%@configuration@%$configuration%g
s%@version@%$version%g
s%@srcdir@%$srcdir%g
s%@c_switch_system@%$c_switch_system%g
s%@libsrc_libs@%$libsrc_libs%g
s%@rip_paths@%$rip_paths%g
s%@inst_paths@%$inst_paths%g
s%@LD_SWITCH_X_SITE@%$LD_SWITCH_X_SITE%g
s%@C_SWITCH_X_SITE@%$C_SWITCH_X_SITE%g
s%@CFLAGS@%$CFLAGS%g
s%@LIBS@%$LIBS%g
s%@DEFS@%-DHAVE_CONFIG_H%" $top_srcdir/${file}.in >> $file
fi; done
test -n "$gen_config" || gen_config=src/config.h
echo creating $gen_config
# These sed commands are put into SEDDEFS when defining a macro.
# They are broken into pieces to make the sed script easier to manage.
# They are passed to sed as "A NAME B NAME C VALUE D", where NAME
# is the cpp macro being defined and VALUE is the value it is being given.
# Each defining turns into a single global substitution command.
#
# SEDd sets the value in "#define NAME VALUE" lines.
SEDdA='s@^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
SEDdB='\([ 	][ 	]*\)[^ 	]*@\1#\2'
SEDdC='\3'
SEDdD='@g'
# SEDu turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
SEDuA='s@^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
SEDuB='\([ 	]\)@\1#\2define\3'
SEDuC=' '
SEDuD='\4@g'
# SEDe turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
SEDeA='s@^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
SEDeB='$@\1#\2define\3'
SEDeC=' '
SEDeD='@g'
rm -f conftest.sed
EOF
# Turn off quoting long enough to insert the sed commands.
rm -f conftest.sh
cat > conftest.sh <<EOF
$SEDDEFS
EOF

# Maximum number of lines to put in a single here document.
maxshlines=9

# Break up $SEDDEFS (now in conftest.sh) because some shells have a limit
# on the size of here documents.

while :
do
  lines=`grep -c . conftest.sh`
  if test -z "$lines" || test "$lines" -eq 0; then break; fi
  rm -f conftest.s1 conftest.s2
  sed ${maxshlines}q conftest.sh > conftest.s1 # Like head -20.
  sed 1,${maxshlines}d conftest.sh > conftest.s2 # Like tail +21.
  # Write a limited-size here document to append to conftest.sed.
  echo 'cat >> conftest.sed <<CONFEOF' >> config.status
  cat conftest.s1 >> config.status
  echo 'CONFEOF' >> config.status
  rm -f conftest.s1 conftest.sh
  mv conftest.s2 conftest.sh
done
rm -f conftest.sh

# Now back to your regularly scheduled config.status.
cat >> config.status <<\EOF
# This sed command replaces #undef's with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it in
# src/config.h.
cat >> conftest.sed <<\CONFEOF
s,^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
CONFEOF
rm -f conftest.h
# Break up the sed commands because old seds have small limits.
maxsedlines=20
cp $top_srcdir/$gen_config.in conftest.h1
while :
do
  lines=`grep -c . conftest.sed`
  if test -z "$lines" || test "$lines" -eq 0; then break; fi
  rm -f conftest.s1 conftest.s2 conftest.h2
  sed ${maxsedlines}q conftest.sed > conftest.s1 # Like head -20.
  sed 1,${maxsedlines}d conftest.sed > conftest.s2 # Like tail +21.
  sed -f conftest.s1 < conftest.h1 > conftest.h2
  rm -f conftest.s1 conftest.h1 conftest.sed
  mv conftest.h2 conftest.h1
  mv conftest.s2 conftest.sed
done
rm -f conftest.sed conftest.h
echo "/* $gen_config.  Generated automatically by configure.  */" > conftest.h
cat conftest.h1 >> conftest.h
rm -f conftest.h1
if cmp -s $gen_config conftest.h 2>/dev/null; then
  # The file exists and we would not be changing it.
  rm -f conftest.h
else
  rm -f $gen_config
  mv conftest.h $gen_config
fi


exit 0
EOF
chmod +x config.status
test -n "$no_create" || ./config.status

