% \iffalse -*- coding: utf-8 ; -*- \fi 
% \iffalse meta-comment
%
% Copyright (C) 2022-2026 by F. Pantigny
% -----------------------------------
%
% This file may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
% The latest version of this license is in:
%
% http://www.latex-project.org/lppl.txti
%
% and version 1.3 or later is part of all distributions of LaTeX
% version 2005/12/01 or later.
%
% \fi
% \iffalse
% 
%<*batchfile> 
\begingroup
\input l3docstrip.tex
\endgroup
%</batchfile>
%
%<@@=piton>
%<*driver>
\documentclass{l3doc}
\VerbatimFootnotes
\usepackage{geometry}
\geometry{left=2.8cm,right=2.8cm,top=2.5cm,bottom=2.5cm,papersize={21cm,29.7cm}}
\usepackage{fontspec}
\usepackage[dvipsnames,svgnames]{xcolor}
\usepackage{luacolor,lua-ul,upquote}
\fvset{commandchars=\~\#\@,formatcom=\color{gray}}
\usepackage[footnotehyper]{piton} 
\PitonOptions
  { 
    splittable = 4 ,
    math-comments ,
    begin-escape = ! ,
    end-escape = ! ,
    begin-escape-math = \( , 
    end-escape-math = \) ,
  }

\parindent 0pt
\skip\footins = 2\bigskipamount


\PitonOptions{gobble=2} 

\EnableCrossrefs

\begin{document}
\DocInput{piton-code.dtx}
\end{document}
%</driver>
% \fi
% \iffalse
%<*STY>
% \fi
\def\PitonFileVersion{4.12a}
\def\PitonFileDate{2026/05/10}
% \iffalse
%</STY>
%<*LUA>
piton_version = "4.12a" -- 2026/05/10
%</LUA>
%\fi
%
% \catcode`\" = 11 
% 
% \title{The package \pkg{piton}\thanks{This document corresponds to the
% version~\PitonFileVersion\space of \pkg{piton}, at the date of~\PitonFileDate.}} 
% \author{F. Pantigny \\ \texttt{fpantigny@wanadoo.fr}}
%
% \maketitle
%
% \begin{abstract}
% This document is the documented code of the LuaLaTeX package \pkg{piton}. It
% is \emph{not} its user's guide. The guide of utilisation is the document
% |piton.pdf| (with a French translation: |piton-french.pdf|).
% \end{abstract}
% 
%
%
%
%
% \medskip
% The development of the extension \pkg{piton} is done on the following GitHub
% depot:
%
% \verb|https://github.com/fpantigny/piton|
%
% \section{Introduction}
% 
% The main job of the package \pkg{piton} is to take in as input a computer
% listing and to send back to LaTeX as output that code \emph{with interlaced LaTeX
% instructions of formatting}.
%
% In fact, all that job is done by a \textsc{lpeg} called |LPEG1[<language>]|
% where |<language>| is a Lua string which is the name of the computer language.
% That \textsc{lpeg}, when matched against the string of a computer listing,
% returns as capture a Lua table containing data to send to LaTeX. The only
% thing to do after will be to apply |tex.tprint| to each element of that
% table.\footnote{Recall that |tex.tprint| takes in as argument a Lua table
% whose first component is a ``catcode table'' and the second element a string.
% The string will be sent to LaTeX with the regime of catcodes specified by the
% catcode table. If no catcode table is provided, the standard catcodes of LaTeX
% will be used.}
%
% In fact, there is a variant of the \textsc{lpeg} |LPEG1[<language>]|, called
% |LPEG2[<language>]|. The latter uses the first one and will be used to format
% the whole content of an environment |{Piton}| (with, in particular, small tuning
% for the beginning and the end).
% 
% \bigskip
% Consider, for example, the following Python code:
%
% \begin{Piton}
% def parity(x):
%     return x%2
% \end{Piton}
%
% The capture returned by the \textsc{lpeg} |LPEG1['python']| (in Lua, this may
% also be written |LPEG1.python|) against that code is the Lua table containing
% the following elements :
%
% \bigskip
% \begin{minipage}{\linewidth}
% \color{gray}
% 
% |{ "\\__piton_begin_line:" }|\footnote{Each line of the computer listings will
% be encapsulated in a pair: \texttt{\textbackslash_@@_begin_line:} --
% \texttt{\textbackslash@@_end_line:}. The token
% \texttt{\textbackslash@@_end_line:} must be explicit because it will be used as
% marker in order to delimit the argument of the command \texttt{\textbackslash
% @@\_begin\_line:}. Both tokens \texttt{\textbackslash_@@_begin_line:} and
% \texttt{\textbackslash@@_end_line:} will be nullified in the command
% \texttt{\textbackslash piton} (since there can't be lines breaks in the
% argument of a command \texttt{\textbackslash piton}).}  
% 
% \texttt{\{ "\{\textbackslash PitonStyle\{Keyword\}\{" \}}\footnote{The
% lexical elements for which we have a \pkg{piton} style will be
% formatted via the use of the command \texttt{\textbackslash PitonStyle}.
% Such an element is typeset in LaTeX via the syntax \texttt{\{\textbackslash
% PitonStyle\{\textsl{style}\}\{...\}\}} because the instructions inside an \texttt{\textbackslash
% PitonStyle} may be both semi-global declarations like
% \texttt{\textbackslash bfseries} and commands with one argument like
% \texttt{\textbackslash fbox}.}
%
% \texttt{\{
% luatexbase.catcodetables.other\footnote{\texttt{luatexbase.catcodetables.other} is a mere number which corresponds to the ``catcode table'' whose all characters have the catcode ``other'' (which means that they will be typeset by LaTeX verbatim).}, "def" \} }
%
% |{ "}}" }|
%
% |{ luatexbase.catcodetables.other, " " }|
%
% |{ "{\PitonStyle{Name.Function}{" }|
%
% |{ luatexbase.catcodetables.other, "parity" }|
%
% |{ "}}" }|
% 
% |{ luatexbase.catcodetables.other, "(" }|
%
% |{ luatexbase.catcodetables.other, "x" }|
%
% |{ luatexbase.catcodetables.other, ")" }|
%
% |{ luatexbase.catcodetables.other, ":" }|
% 
% |{ "\\__piton_end_line: \\__piton_par: \\__piton_begin_line:" }|
%
% |{ luatexbase.catcodetables.other, "    " }|
%
% |{ "{\PitonStyle{Keyword}{" }|
%
% |{ luatexbase.catcodetables.other, "return" }|
%
% |{ "}}" }|
%
% |{ luatexbase.catcodetables.other, " " }|
%
% |{ luatexbase.catcodetables.other, "x" }|
%
% |{ "{\PitonStyle{Operator}{" }|
%
% |{ luatexbase.catcodetables.other, "%" }|
%
% |{ "}}" }|
%
% |{ "{\PitonStyle{Number}{" }|
%
% |{ luatexbase.catcodetables.other, "2" }|
%
% |{ "}}" }|
% 
% |{ "\\__piton_end_line:" }|
% 
% \end{minipage}
%
% \bigskip
% We give now the LaTeX code which is sent back by Lua to TeX (we have written
% on several lines for legibility but no character |\r| will be sent to LaTeX). The
% characters which are greyed-out are sent to LaTeX with the catcode ``other''
% (=12). All the others characters are sent with the regime of catcodes of L3
% (as set by |\ExplSyntaxOn|).
%
% 
% \begingroup
% \def\gbox#1{\colorbox{gray!20}{\strut #1}}
% \setlength{\fboxsep}{1pt}
% 
% \begin{Verbatim*}[formatcom = \color{black}]
% \__piton_begin_line:{\PitonStyle{Keyword}{~gbox#def@}}
% ~gbox# @{\PitonStyle{Name.Function}{~gbox#parity@}}~gbox#(x):@\__piton_end_line:\__piton_par:
% \__piton_begin_line:~gbox#    @{\PitonStyle{Keyword}{~gbox#return@}}
% ~gbox# x@{\PitonStyle{Operator}{~gbox#%@}}{\PitonStyle{Number}{~gbox#2@}}\__piton_end_line:
% \end{Verbatim*}
% \endgroup
%
%
% 
%
% \section{The L3 part of the implementation}
%
% \subsection{Declaration of the package}
%    \begin{macrocode}
%<*STY>
\NeedsTeXFormat{LaTeX2e}
\ProvidesExplPackage
  {piton}
  {\PitonFileDate}
  {\PitonFileVersion}
  {Highlight computer listings with LPEG on LuaLaTeX}
%    \end{macrocode}
%
%    \begin{macrocode}
\msg_new:nnn { piton } { latex-too-old }
  { 
    Your~LaTeX~release~is~too~old. \\
    You~need~at~least~the~version~of~2025-06-01. \\
    If~you~use~Overleaf,~you~need~at~least~"TeX~Live~2025".\\
    The~package~'piton'~won't~be~loaded.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\providecommand { \IfFormatAtLeastTF } { \@ifl@t@r \fmtversion }
\IfFormatAtLeastTF
  { 2025-06-01 } 
  { } 
  { \msg_critical:nn { piton } { latex-too-old } }
%    \end{macrocode}
% \bigskip
% The command |\text| provided by the package \pkg{amstext} will be used to
% allow the use of the command |\piton{...}| (with the standard syntax) in
% mathematical mode.
%    \begin{macrocode}
\RequirePackage { amstext }
%    \end{macrocode}
%
% \bigskip
% The command |\marginalia| of the package \pkg{marginalia} will be used
% for the margin notes created by the keys |paperclip| and |annotation|.
%    \begin{macrocode}
\RequirePackage { marginalia }
%    \end{macrocode}
% 
% \bigskip
% The package \pkg{transparent} is compatible with \pkg{pdfmanagement} (which
% is not loaded by \pkg{piton} but which is used for the key |join| when it is
% loaded).
%    \begin{macrocode}
\RequirePackage { transparent }
%    \end{macrocode}
%
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_error:n { \msg_error:nn { piton } }
\cs_new_protected:Npn \@@_warning:n { \msg_warning:nn { piton } }
\cs_new_protected:Npn \@@_warning:nn { \msg_warning:nnn { piton } }
\cs_new_protected:Npn \@@_error:nn { \msg_error:nnn { piton } }
\cs_new_protected:Npn \@@_error:nnn { \msg_error:nnnn { piton } }
\cs_new_protected:Npn \@@_fatal:n { \msg_fatal:nn { piton } }
\cs_new_protected:Npn \@@_fatal:nn { \msg_fatal:nnn { piton } }
\cs_new_protected:Npn \@@_msg_new:nn { \msg_new:nnn { piton } }
%    \end{macrocode}
%
% \bigskip
% With Overleaf (and also TeXPage), by default, a document is compiled in
% non-stop mode. When there is an error, there is no way to the user to use the
% key H in order to have more information. That's why we decide to put that
% piece of information (for the messages with such information) in the main part
% of the message when the key |messages-for-Overleaf| is used (at load-time).
%    \begin{macrocode}
\cs_new_protected:Npn \@@_msg_new:nnn #1 #2 #3
  {
    \bool_if:NTF \g_@@_messages_for_Overleaf_bool
      { \msg_new:nnn { piton } { #1 } { #2 \\ #3 } }
      { \msg_new:nnnn { piton } { #1 } { #2 } { #3 } }
  }
%    \end{macrocode}
% 
% \bigskip
% We also create commands which will generate usually an error but only a
% warning on Overleaf. The argument is given by curryfication.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_error_or_warning:n 
  { \bool_if:NTF \g_@@_messages_for_Overleaf_bool \@@_warning:n \@@_error:n }
\cs_new_protected:Npn \@@_error_or_warning:nn 
  { \bool_if:NTF \g_@@_messages_for_Overleaf_bool \@@_warning:nn \@@_error:nn }
%    \end{macrocode}
% 
% We try to detect whether the compilation is done on Overleaf. We use
% |\c_sys_jobname_str| because, with Overleaf, the value of |\c_sys_jobname_str|
% is always ``|output|''.
%    \begin{macrocode}
\bool_new:N \g_@@_messages_for_Overleaf_bool
\bool_gset:Nn \g_@@_messages_for_Overleaf_bool
  { 
       \str_if_eq_p:on \c_sys_jobname_str { _region_ }  % for Emacs
    || \str_if_eq_p:on \c_sys_jobname_str { output }   % for Overleaf
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\@@_msg_new:nn { LuaLaTeX~mandatory }
  { 
    LuaLaTeX~is~mandatory.\\
    The~package~'piton'~requires~the~engine~LuaLaTeX.\\
    \str_if_eq:onT \c_sys_jobname_str { output }
      { If~you~use~Overleaf,~you~can~switch~to~LuaLaTeX~in~
        "Settings~>~Compiler"~and~if~you~use~TeXPage,
        ~you~should~go~in~"Settings". \\ }
    \IfClassLoadedT { beamer }
      {
        Since~you~use~Beamer,~don't~forget~to~use~piton~in~frames~with~
        the~key~'fragile'.\\
      }
    \IfClassLoadedT { ltx-talk }
      {
        Since~you~use~'ltx-talk',~don't~forget~to~use~piton~in~
        environments~'frame*'.\\
      }
  }
\sys_if_engine_luatex:F { \@@_fatal:n { LuaLaTeX~mandatory } }
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
\RequirePackage { luacode }
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
\@@_msg_new:nnn { piton.lua~not~found }
  { 
    The~file~'piton.lua'~can't~be~found.~
    If~you~want~to~know~how~to~retrieve~the~file~'piton.lua',~type~H~<return>.
  }
  {
    On~the~site~CTAN,~go~to~the~page~of~'piton':~https://ctan.org/pkg/piton.~
    The~file~'README.md'~explains~how~to~retrieve~the~files~'piton.sty'~and~
    'piton.lua'.
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\file_if_exist:nF { piton.lua } { \@@_fatal:n { piton.lua~not~found } }
%    \end{macrocode}
%
% 
% \bigskip
% We define a set of keys for the options at load-time.
%    \begin{macrocode}
\keys_define:nn { piton }
  { 
    footnote .bool_gset:N = \g_@@_footnote_bool ,
    footnotehyper .bool_gset:N = \g_@@_footnotehyper_bool ,
    footnote .usage:n = load , 
    footnotehyper .usage:n = load ,

    beamer .bool_gset:N = \g_@@_beamer_bool ,
    beamer .usage:n = load ,

    unknown .code:n = \@@_error:n { Unknown~key~for~package }
  }
%    \end{macrocode}
% 
%    \begin{macrocode}
\@@_msg_new:nn { Unknown~key~for~package }
  {
    Unknown~key.\\
    You~have~used~the~key~'\l_keys_key_str'~when~loading~piton~
    but~the~only~keys~available~here~are~'beamer',~'footnote'~
    and~'footnotehyper'.~Other~keys~are~available~in~
    \token_to_str:N \PitonOptions.\\
    That~key~will~be~ignored.
  }
%    \end{macrocode}
%
%
% \bigskip
% We process the options provided by the user at load-time.
%    \begin{macrocode}
\ProcessKeyOptions 
%    \end{macrocode}
%
% 
% \bigskip
%    \begin{macrocode}
\IfClassLoadedT { beamer } { \bool_gset_true:N \g_@@_beamer_bool }
\IfClassLoadedT { ltx-talk } { \bool_gset_true:N \g_@@_beamer_bool } 
\IfPackageLoadedT { beamerarticle } { \bool_gset_true:N \g_@@_beamer_bool } 
%    \end{macrocode}
%
%    \begin{macrocode}
\lua_now:e
  { 
    piton = piton~or~{ } 
    piton.last_code = ''
    piton.last_language = ''
    piton.join = ''
    piton.write = ''
    piton.path_write = ''
    \bool_if:NT \g_@@_beamer_bool { piton.beamer = true } 
  }
%    \end{macrocode}
%
% 
% \bigskip
%    \begin{macrocode}
\RequirePackage { xcolor } 
%    \end{macrocode}
%
%
%    \begin{macrocode}
\@@_msg_new:nn { footnote~with~footnotehyper~package }
  { 
    Footnote~forbidden.\\
    You~can't~use~the~option~'footnote'~because~the~package~
    footnotehyper~has~already~been~loaded.~
    If~you~want,~you~can~use~the~option~'footnotehyper'~and~the~footnotes~  
    within~the~environments~of~piton~will~be~extracted~with~the~tools~
    of~the~package~footnotehyper.\\
    If~you~go~on,~the~package~footnote~won't~be~loaded.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { footnotehyper~with~footnote~package }
  { 
    You~can't~use~the~option~'footnotehyper'~because~the~package~
    footnote~has~already~been~loaded.~
    If~you~want,~you~can~use~the~option~'footnote'~and~the~footnotes~  
    within~the~environments~of~piton~will~be~extracted~with~the~tools~
    of~the~package~footnote.\\ 
    If~you~go~on,~the~package~footnotehyper~won't~be~loaded.
  }
%    \end{macrocode}
%
% \medskip
%    \begin{macrocode}
\bool_if:NT \g_@@_footnote_bool 
  { 
%    \end{macrocode}
% The class \cls{beamer} has its own system to extract footnotes and that's why
% we have nothing to do if \cls{beamer} is used. 
%    \begin{macrocode}
    \IfClassLoadedTF { beamer }
      { \bool_gset_false:N \g_@@_footnote_bool }
      { 
        \IfPackageLoadedTF { footnotehyper }
          { \@@_error:n { footnote~with~footnotehyper~package } }
          { \usepackage { footnote } }
      }
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\bool_if:NT \g_@@_footnotehyper_bool 
  { 
%    \end{macrocode}
% The class \cls{beamer} has its own system to extract footnotes and that's why
% we have nothing to do if \cls{beamer} is used. 
%    \begin{macrocode}
    \IfClassLoadedTF { beamer }
      { \bool_gset_false:N \g_@@_footnote_bool }
      { 
        \IfPackageLoadedTF { footnote }
          { \@@_error:n { footnotehyper~with~footnote~package } }
          { \usepackage { footnotehyper } }
        \bool_gset_true:N \g_@@_footnote_bool 
      }
  }
%    \end{macrocode}
% The flag |\g_@@_footnote_bool| is raised and so, we will only have to test
% |\g_@@_footnote_bool| in order to know if we have to insert an environment
% |{savenotes}|.
%
% 
% \bigskip
% \subsection{Parameters and technical definitions}
%
%    \begin{macrocode}
\dim_new:N \l_@@_rounded_corners_dim
%    \end{macrocode}
% 
%    \begin{macrocode}
\bool_new:N \l_@@_in_label_bool
%    \end{macrocode}
% 
%    \begin{macrocode}
\dim_new:N \l_@@_tmpc_dim
%    \end{macrocode}
% \medskip
%
% The listing that we have to format will be stored in |\l_@@_listing_tl|.
% That applies both for the command |\PitonInputFile| and the environment |{Piton}|
% (or another environment defined by |\NewPitonEnvironment|).
%    \begin{macrocode}
\tl_new:N \l_@@_listing_tl
%    \end{macrocode}
%
% \medskip
% The content of an environment such as |{Piton}| will be composed first in the
% following box, but that box will (sometimes) be \emph{unvboxed} at the end.
%
% We need a global variable (see |\@@_add_bg_and_right_nb_to_output_box:|).
%    \begin{macrocode}
\box_new:N \g_@@_output_box
%    \end{macrocode}
%
%
% The following string will contain the name of the computer language
% considered (the initial value is |python|).
%
%    \begin{macrocode}
\str_new:N \l_piton_language_str
\str_set:Nn \l_piton_language_str { python }
%    \end{macrocode}
% 
% \medskip
% Each time an environment of \pkg{piton} is used, the computer listing in the
% body of that environment will be stored in the following global string.
%    \begin{macrocode}
\tl_new:N \g_piton_last_code_tl
%    \end{macrocode}
%
% \medskip
% The following parameter corresponds to the key |path| (which is the path used
% to include files by |\PitonInputFile|). Each component of that sequence will
% be a string (type |str|).
%    \begin{macrocode}
\seq_new:N \l_@@_path_seq
%    \end{macrocode}
%
% \medskip
% The names of all the join files will be stored in the following sequence:
%    \begin{macrocode}
\seq_new:N \g_@@_join_seq
%    \end{macrocode}
% 
%
% \medskip
%    \begin{macrocode}
\str_new:N \l_@@_join_str
%    \end{macrocode}
% 
% \medskip
% When the key |tcolorbox| is used, you will have to take into account the width
% of the graphical elements added by |tcolorbox| on both sides of the listing.
% We will put that quantity in the following variable.
%    \begin{macrocode}
\dim_new:N \l_@@_tcb_margins_dim
%    \end{macrocode}
%
% \medskip
% The following parameter corresponds to the key |box|.
%    \begin{macrocode}
\str_new:N \l_@@_box_str
%    \end{macrocode}
%
% \medskip
% In order to have a better control over the keys.
%    \begin{macrocode}
\bool_new:N \l_@@_in_PitonOptions_bool 
\bool_new:N \l_@@_in_PitonInputFile_bool 
%    \end{macrocode}
%
% 
% \medskip
% We will compute (with Lua) the numbers of lines of the listings (or
% \emph{chunks} of listings when |split-on-empty-lines| is in force) and store
% it in the following counter.
%    \begin{macrocode}
\int_new:N \g_@@_nb_lines_int
%    \end{macrocode}
% 
% The same for the number of non-empty lines of the listings.
%    \begin{macrocode}
\int_new:N \l_@@_nb_non_empty_lines_int
%    \end{macrocode}
%
% 
% \medskip 
% The following counter will be used to count the lines during the composition.
% It will take into account all the lines, empty or not empty. It won't be used
% to print the numbers of the lines but will be used to allow or disallow line
% breaks (when |splittable| is in force) and for the color of the background
% (when |background-color| is used with a \emph{list} of colors or when
% |\rowcolor| is used).
%    \begin{macrocode}
\int_new:N \g_@@_line_int
%    \end{macrocode}
% 
% 
% \medskip
% The following string corresponds to the key |background-color| of |\PitonOptions|.
%    \begin{macrocode}
\clist_new:N \l_@@_bg_color_clist
%    \end{macrocode}
%
% We will also keep in memory the length of the previous |clist| (for efficiency).
%    \begin{macrocode}
\int_new:N \l_@@_bg_colors_int 
%    \end{macrocode}
%
% \medskip
%    \begin{macrocode}
\tl_new:N \l_@@_space_in_string_tl
%    \end{macrocode}
% 
% \medskip
% The following parameters correspond to the keys |begin-range| and |end-range| of
% the command |\PitonInputFile|.
%    \begin{macrocode}
\str_new:N \l_@@_begin_range_str
\str_new:N \l_@@_end_range_str
%    \end{macrocode}
%
% \medskip
% The following boolean corresponds to the key |math-comments| (available only
% in the preamble of the LaTeX document). 
%    \begin{macrocode}
\bool_new:N \g_@@_math_comments_bool
%    \end{macrocode}
%
% \medskip
% The argument of |\PitonInputFile|.
%    \begin{macrocode}
\str_new:N \l_@@_file_name_str 
%    \end{macrocode}
%
% \medskip
% The following line can't be deleted.
%    \begin{macrocode}
\bool_new:N \l_@@_tcolorbox_bool
%    \end{macrocode}
%
% \medskip
% The following boolean corresponds to the keys |paperclip| and |annotation|.
%    \begin{macrocode}
\bool_new:N \l_@@_paperclip_bool
\str_new:N \l_@@_paperclip_str
%    \end{macrocode}
%
% \medskip
% The listings embedded in the \textsc{pdf} by the key |paperclip| will be numbered by
% the following counter.
%    \begin{macrocode}
\int_new:N \g_@@_paperclip_int
%    \end{macrocode}
% 
% \medskip
% The following boolean corresponds to the key |show-spaces|.
%    \begin{macrocode}
\bool_new:N \l_@@_show_spaces_bool
%    \end{macrocode}
%
%
% \medskip
% The following boolean corresponds to the key |break-lines-in-piton|.
%    \begin{macrocode}
\bool_new:N \l_@@_break_lines_in_piton_bool
%    \end{macrocode}
%
% \medskip
% The following flag will be raised when the key |max-width| is used (and 
% when |width| is used with the key |min|, which is equivalent to
% |max-width=\linewidth|). Note also that the key |box| sets |width=min| (except
% if |min| is used with a numerical value).
%    \begin{macrocode}
\bool_new:N \l_@@_minimize_width_bool
%    \end{macrocode}
%
% \bigskip
% The following dimension corresponds to the key |width|. It's meant to be the whole width of
% the environment (for instance, the width of the box of \pkg{tcolorbox} when the key
% |tcolorbox| is used). The initial value is $0$~pt which means that the end user has not
% used the key. In that case, it will be set equal to the current value of |\linewidth|
% in |\@@_pre_composition:|.
%
% However if |max-width| is used (or |width=min| which is equivalent to
% |max-width=\linewidth|), the actual width of the final environment in the \textsc{pdf}
% may (potentially) be smaller.
%    \begin{macrocode} 
\dim_new:N \l_@@_width_dim
%    \end{macrocode}
%
% \medskip
% |\l_@@_listing_width_dim| will be the width of the listing taking into account the
% lines of code (of course) but also:
% \begin{itemize}
% \item |l_@@_left_margin_dim| (for the numbers of lines);
% \item a small margin when |background-color| is in force\footnote{Remark that the mere
% use of |\rowcolor| does not add those small margins.}).
% \end{itemize}
%    \begin{macrocode}
\dim_new:N \l_@@_listing_width_dim
%    \end{macrocode}
% However, if |max-width| is used (or |width=min| which is equivalent to
% |max-width=\linewidth|), that length will be computed once again in 
% |\@@_create_output_box:|
%
% \medskip
% |\l_@@_code_width_dim| will be the length of the lines of code, without the potential
% margins (for the backgrounds and for |length-margin| for the number of lines).
%
% It will be computed in |\@@_compute_code_width:|.
%    \begin{macrocode}
\dim_new:N \l_@@_code_width_dim
%    \end{macrocode}
%
% \medskip
%    \begin{macrocode}
\box_new:N \l_@@_line_box
%    \end{macrocode}
%
% \medskip
% The following dimension corresponds to the keys |left-margin| and |right-margin|.
%    \begin{macrocode}
\dim_new:N \l_@@_left_margin_dim
\dim_new:N \l_@@_right_margin_dim
%    \end{macrocode}
%
% \medskip
% The following boolean will be set when the key |left-margin=auto| is used.
%    \begin{macrocode}
\bool_new:N \l_@@_left_margin_auto_bool
\bool_new:N \l_@@_right_margin_auto_bool
%    \end{macrocode}
%
%
%
% \medskip
% When the key |line-numbers/position| is set to |right|, we will have
% to keep in memory the numbers of the lines in the following sequence.
%    \begin{macrocode}
\seq_new:N \g_@@_visual_line_numbers_seq
%    \end{macrocode}
% 
% \medskip
% Be careful. The following sequence |\g_@@_languages_seq| is not the list of
% the languages supported by \pkg{piton}. It's the list of the languages for
% which at least a user function has been defined. We need that sequence only
% for the command |\PitonClearUserFunctions| when it is used without its
% optional argument: it must clear the whole list of languages for which at least
% a user function has been defined.
%    \begin{macrocode}
\seq_new:N \g_@@_languages_seq 
%    \end{macrocode}
% 
%
%    \begin{macrocode}
\cs_new_protected:Npn \@@_tab:
  { 
    \bool_if:NTF \l_@@_show_spaces_bool
      { 
        \hbox_set:Nn \l_tmpa_box 
          { \prg_replicate:nn \l_@@_tab_size_int { ~ } } 
        \dim_set:Nn \l_tmpa_dim { \box_wd:N \l_tmpa_box }
        \( \mathcolor { gray } 
             { \hbox_to_wd:nn \l_tmpa_dim { \rightarrowfill } } \)
      }
      { \hbox:n { \prg_replicate:nn \l_@@_tab_size_int { ~ } } }
    \int_gadd:Nn \g_@@_indentation_int \l_@@_tab_size_int 
  }
%    \end{macrocode}
%
% \medskip
% The following token list will be used only for the spaces in the strings.
%    \begin{macrocode}
\tl_set_eq:NN \l_@@_space_in_string_tl \nobreakspace 
%    \end{macrocode}
% When the key |break-lines-in-piton| is set, that parameter will be replaced by
% |\space| (in |\piton| with the standard syntax) and when the key
% |show-spaces-in-strings| is set, it will be replaced by ␣ (U+2423).
% 
%
% \medskip
% At each line, the following counter will count the spaces at the beginning.
%    \begin{macrocode}
\int_new:N \g_@@_indentation_int
%    \end{macrocode}
% 
%
% 
% \bigskip
% In the environment |{Piton}|, the command |\label| will be linked to the
% following command.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_label:n #1
  {
    \bool_if:NTF \l_@@_line_numbers_bool
      {
        \@bsphack 
        \protected@write \@auxout { }
          { 
            \string \newlabel { #1 } 
            { 
              { \int_use:N \g_@@_visual_line_int } 
              { \thepage } 
              { } 
              { line.#1 } 
              { } 
            } 
          } 
        \@esphack
        \IfPackageLoadedT { hyperref }
          { \Hy@raisedlink { \hyper@anchorstart { line.#1 } \hyper@anchorend } }
      }
      { \@@_error:n { label~with~lines~numbers } }
  }
%    \end{macrocode}
%
% \bigskip
% 
% The same goes for the command |\zlabel| if the |zref| package is loaded.
% Note that |\label| will also be linked to |\@@_zlabel:n| if the key
% |label-as-zlabel| is set to |true|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_zlabel:n #1
  {
    \bool_if:NTF \l_@@_line_numbers_bool
      {
        \@bsphack
        \protected@write \@auxout { }
          {
            \string \zref@newlabel { #1 }
              {
                \string \default { \int_use:N \g_@@_visual_line_int }
                \string \page { \thepage }
                \string \zc@type { line }
                \string \anchor { line.#1 }
              }
          }
        \@esphack
        \IfPackageLoadedT { hyperref }
          { \Hy@raisedlink { \hyper@anchorstart { line.#1 } \hyper@anchorend } }
      }
      { \@@_error:n { label~with~lines~numbers } }
  }
%    \end{macrocode}
%
% \bigskip
% In the environments |{Piton}| the command |\rowcolor| will be linked to the
% following one.
%    \begin{macrocode}
\NewDocumentCommand { \@@_rowcolor:n } { o m }
  {
    \tl_gset:ce
      { g_@@_color_ \int_eval:n { \g_@@_line_int + 1 }_ tl }
      { \tl_if_novalue:nTF { #1 } { #2 } { [ #1 ] { #2 } } }
    \bool_gset_true:N \g_@@_rowcolor_inside_bool 
  }
%    \end{macrocode}
%
% In the command |piton| (in fact in |\@@_piton_standard| and |\@@_piton_verbatim|,
% the command |\rowcolor| will be linked to the following one (in order to nullify
% its effect).
%    \begin{macrocode}
\NewDocumentCommand { \@@_noop_rowcolor } { o m } { }
%    \end{macrocode}
% 
% \bigskip
% The following commands correspond to the keys |marker/beginning| and
% |marker/end|. The values of that keys are functions that will be applied to
% the ``\emph{range}'' specified by the end user in an individual
% |\PitonInputFile|. They will construct the markers used to find textually in
% the external file loaded by \pkg{piton} the part which must be included (and
% formatted).
%
% These macros must \emph{not} be protected.
%    \begin{macrocode}
\cs_new:Npn \@@_marker_beginning:n #1 { }
\cs_new:Npn \@@_marker_end:n #1 { }
%    \end{macrocode}
% 
% 
% 
% \bigskip
% The following token list will be evaluated at the end of
% |\@@_begin_line:|... |\@@_end_line:| and cleared at the end. It will be used
% by LPEG acting between the lines of the Python code in order to add
% instructions to be executed in vertical mode between the lines.
%    \begin{macrocode}
\tl_new:N \g_@@_after_line_tl
%    \end{macrocode}
%
%
% \bigskip
% The spaces at the end of a line of code are deleted by \pkg{piton}.
% However, it's not actually true: they are replace by |\@@_trailing_space:|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_trailing_space: { }
%    \end{macrocode}
% When we have to rescan some pieces of code, we will use |\@@_piton:n| and that
% command |\@@_piton:n| will set |\@@_trailing_space:| equal to |\space|.
%
% \bigskip
%    \begin{macrocode}
\bool_new:N \g_@@_color_is_none_bool
\bool_new:N \g_@@_next_color_is_none_bool
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\bool_new:N \g_@@_rowcolor_inside_bool
%    \end{macrocode}
%
% 
% \bigskip
% \subsection{Detected commands}
%
% There are four keys for ``detected commands and environments'':
% |detected-commands|, |raw-detected-commands|, |beamer-commands| and
% |beamer-environments|.
%
% In fact, there is also |vertical-detected-commands| but has a special treatment. 
%
% For each of those keys, we keep a clist of the names of such detected
% commands and environments. For the commands, the corresponding |clist| will
% contain the name of the commands \emph{wihtout} the backlash.
%
%    \begin{macrocode}
\clist_new:N \l_@@_detected_commands_clist
\clist_new:N \l_@@_raw_detected_commands_clist
\clist_new:N \l_@@_beamer_commands_clist
\clist_set:Nn \l_@@_beamer_commands_clist
  { uncover, only , visible , invisible , alert , action}
\clist_new:N \l_@@_beamer_environments_clist
\clist_set:Nn \l_@@_beamer_environments_clist
  { uncoverenv , onlyenv , visibleenv , invisibleenv , alertenv , actionenv }
%    \end{macrocode}
% Remark that, since we have used clists, these clists, as token lists are
% ``purified'': there is no empty component and for each component, there is no
% space on both sides.
%
% \bigskip
% Of course, the value of those clists may be modified during the preamble of
% the document by using the corresponding key (|detected-commands|, etc.).
%
% However, after the |\begin{document}|, it's no longer possible to modify those
% clists because their contents will be used in the construction of the main
% \textsc{lpeg} for each computer language.
%
% \bigskip
% However, in a |\AtBeginDocument|, we will convert those clists into
% ``toks registers'' of TeX.
%    \begin{macrocode}
\hook_gput_code:nnn { begindocument } { . }
  { 
    \newtoks \PitonDetectedCommands
    \newtoks \PitonRawDetectedCommands
    \newtoks \PitonBeamerCommands
    \newtoks \PitonBeamerEnvironments
%    \end{macrocode}
% L3 does \emph{not} support those ``toks registers'' but it's still possible to
% affect to the ``toks registers'' the content of the clists with a L3-like syntax.
%    \begin{macrocode}
    \exp_args:NV \PitonDetectedCommands \l_@@_detected_commands_clist 
    \exp_args:NV \PitonRawDetectedCommands \l_@@_raw_detected_commands_clist
    \exp_args:NV \PitonBeamerCommands \l_@@_beamer_commands_clist
    \exp_args:NV \PitonBeamerEnvironments \l_@@_beamer_environments_clist
  }
%    \end{macrocode}
%
% Then at the beginning of the document, when we will load the Lua file
% |piton.lua|, we will read those ``toks registers'' within Lua (with
% |tex.toks|) and convert them into Lua tables (and, then, use those tables to
% construct \textsc{lpeg}).
%
%
% 
% \bigskip
% When the key |vertical-detected-commands| is used, we will have to redefine
% the corresponding commands in |\@@_pre_composition:|.
%
% The instructions for these redefinitions will be put in the following token list.
%    \begin{macrocode}
\tl_new:N \g_@@_def_vertical_commands_tl
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_vertical_commands:n #1
  {
    \clist_put_right:Nn \l_@@_raw_detected_commands_clist { #1 } 
    \clist_map_inline:nn { #1 }
      {
        \cs_set_eq:cc { @@ _ old _ ##1 : } { ##1 }
        \cs_new_protected:cn { @@ _ new _ ##1 : n }
          {
            \bool_if:nTF
              { \l_@@_tcolorbox_bool || ! \str_if_empty_p:N \l_@@_box_str }
              {
                \tl_gput_right:Nn \g_@@_after_line_tl
                  { \use:c { @@ _old _ ##1 : } { ####1 } }
              }
              {
                \cs_if_exist:cTF { g_@@_after_line _ \int_use:N \g_@@_line_int _ tl }
                  { \tl_gput_right:cn }
                  { \tl_gset:cn }
                  { g_@@_after_line _ \int_eval:n { \g_@@_line_int + 1 } _ tl }
                  { \use:c { @@ _old _ ##1 : } { ####1 } }
              }
          }
        \tl_gput_right:Nn \g_@@_def_vertical_commands_tl
          { \cs_set_eq:cc { ##1 } { @@ _ new _ ##1 : n } }
      }
  }
%    \end{macrocode}
%
%
% 
% \bigskip
% \subsection{Treatment of a line of code}
% 
% 
%    \begin{macrocode}
\cs_new_protected:Npn \@@_replace_spaces:n #1 
  {
    \tl_set:Nn \l_tmpa_tl { #1 } 
    \bool_if:NTF \l_@@_show_spaces_bool
      { 
        \tl_set:Nn \l_@@_space_in_string_tl { ␣ } % U+2423
        \tl_replace_all:NVn \l_tmpa_tl \c_catcode_other_space_tl { ␣ } % U+2423
      } 
      {
%    \end{macrocode}
% If the key |break-lines-in-Piton| is in force, we replace all the characters
% U+0020 (that is to say the spaces) by |\@@_breakable_space:|. Remark that,
% except the spaces inserted in the LaTeX comments (and maybe in the math
% comments), all these spaces are of catcode ``other'' (=12) and are
% unbreakable.
%    \begin{macrocode}
        \bool_if:NT \l_@@_break_lines_in_Piton_bool
          { 
            \tl_if_eq:NnF \l_@@_space_in_string_tl { ␣ }
              { \tl_set_eq:NN \l_@@_space_in_string_tl \@@_breakable_space: }
%    \end{macrocode}
% 
% In the following code, we have to replace all the spaces in the token list
% |\l_tmpa_tl|. That means that this replacement must be ``recursive'': even the
% spaces which are within brace groups (|{...}|) must be replaced. For instance,
% the spaces in long strings of Python are within such groups since there are
% within a command |\PitonStyle{String.Long}{...}|. That's why the
% use of |\tl_replace_all:Nnn| is not enough. 
%
% The first implementation was using |\tl_regex_replace_all:nnN|
%
% |\tl_regex_replace_all:nnN { \x20 } { \c { @@_breakable_space: } } \l_tmpa_tl|
%
% but that programming was certainly slow.
%
% Now, we use |\tl_replace_all:NVn| \emph{but}, in the styles
% |String.Long.Internal| we replace the spaces with
% |\@@_breakable_space:| by another use of the same technic with
% |\tl_replace_all:NVn|. We do the same jog for the \emph{doc strings} of Python and
% for the comments.
%    \begin{macrocode}
            \tl_replace_all:NVn \l_tmpa_tl 
              \c_catcode_other_space_tl 
              \@@_breakable_space:
          }
      }
   \l_tmpa_tl
  }
\cs_generate_variant:Nn \@@_replace_spaces:n { o }
%    \end{macrocode}
% 
% \bigskip
% In the contents provided by Lua, each line of the Python code will be
% surrounded by |\@@_begin_line:| and |\@@_end_line:|. 

% |\@@_begin_line:| is a
% TeX command with a delimited argument (|\@@_end_line:| is the marker for the
% end of the argument).
%
% However, we define also |\@@_end_line:| as no-op, because, when the last line
% of the listing is the end of an environment of Beamer (eg |\end{uncoverenv}|),
% we will have a token |\@@_end_line:| added at the end without any
% corresponding |\@@_begin_line:|).
%    \begin{macrocode}
\cs_set_protected:Npn \@@_end_line: { }
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
\cs_set_protected:Npn \@@_begin_line: #1 \@@_end_line:
  { 
    \group_begin:
    \int_gzero:N \g_@@_indentation_int
%    \end{macrocode}
%
% \medskip
% We put the potential number of line, the potential left and right margins.
%    \begin{macrocode}
    \hbox_set:Nn \l_@@_line_box 
      { 
        \skip_horizontal:N \l_@@_left_margin_dim
        \bool_if:NT \l_@@_line_numbers_bool
          {
%    \end{macrocode}
% |\l_tmpa_int| will be equal to $1$ when the current line is not empty.
%    \begin{macrocode}
            \int_set:Nn \l_tmpa_int 
              {
                \lua_now:e 
                  { 
                    tex.sprint 
                      ( 
%    \end{macrocode}
% The following expression gives an integer of Lua (\emph{integer} is a
% sub-type of \emph{number} introduced in Lua 5.3), the output will be of the
% form |"3"| (and not |"3.0"|) which is what we want for |\int_set:Nn|.
%    \begin{macrocode}
                        piton.empty_lines
                          [ \int_eval:n { \g_@@_line_int + 1 } ] 
                      ) 
                  } 
              }
            \bool_lazy_or:nnT
              { \int_compare_p:nNn \l_tmpa_int = \c_one_int }
              { ! \l_@@_skip_empty_lines_bool }
              { \int_gincr:N \g_@@_visual_line_int }
              
            \bool_lazy_or:nnTF
              { \int_compare_p:nNn \l_tmpa_int = \c_one_int }
              { ! \l_@@_skip_empty_lines_bool && \l_@@_label_empty_lines_bool }
              {
                \bool_lazy_or:nnTF
                  { \int_compare_p:nNn { \l_@@_numbers_step_int } = 1 }
                  {
                    \int_compare_p:nNn
                      {
                        \int_mod:nn
                          { \g_@@_visual_line_int }
                          { \l_@@_numbers_step_int }
                      }
                      = \c_one_int
                  }
                  {
                    \str_if_eq:eeTF \l_@@_line_numbers_position_str { left }
                      \@@_print_number_left: 
                      {
                        \seq_gput_right:Ne \g_@@_visual_line_numbers_seq
                          { \int_use:N \g_@@_visual_line_int }
                      }
                  }
                  {
                    \str_if_eq:eeT \l_@@_line_numbers_position_str { right }
                      { \seq_gput_right:Nn \g_@@_visual_line_numbers_seq { } }
                  }
              }
              {
                \str_if_eq:eeT \l_@@_line_numbers_position_str { right }
                  { \seq_gput_right:Nn \g_@@_visual_line_numbers_seq { } }
              }
          }
%    \end{macrocode}
% If there is a background, we must remind that there is a left margin of 0.5~em
% for the background (which will be added later).
%    \begin{macrocode}
        \int_compare:nNnT \l_@@_bg_colors_int > { \c_zero_int }
          { 
%    \end{macrocode}
% ... but if only if the key |left-margin| is not used !
%    \begin{macrocode}
            \dim_compare:nNnT \l_@@_left_margin_dim = \c_zero_dim 
              { \skip_horizontal:n { 0.5 em } }
          }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
        \bool_if:NTF \l_@@_minimize_width_bool
          {
            \hbox_set:Nn \l_tmpa_box
              {
                \language = -1
                \raggedright 
                \strut 
                \@@_replace_spaces:n { #1 }
                \strut \hfil 
              } 
            \dim_compare:nNnTF { \box_wd:N \l_tmpa_box } < \l_@@_code_width_dim 
               { \box_use:N \l_tmpa_box }
               { \@@_vtop_of_code:n { #1 } }               
          }
          { \@@_vtop_of_code:n { #1 } }
      }
%    \end{macrocode}
% Now, the line of code is composed in the box |\l_@@_line_box|.
% 
% \bigskip
%    \begin{macrocode}
    \box_set_dp:Nn \l_@@_line_box { \box_dp:N \l_@@_line_box + 1.25 pt } 
    \box_set_ht:Nn \l_@@_line_box { \box_ht:N \l_@@_line_box + 1.25 pt }
%    \end{macrocode}
%
%    \begin{macrocode}
    \box_use_drop:N \l_@@_line_box
%    \end{macrocode}
%
%    \begin{macrocode}
    \group_end:
    \g_@@_after_line_tl
    \tl_gclear:N \g_@@_after_line_tl
  }
%    \end{macrocode}
%
% \bigskip
% The following command will be used in |\@@_begin_line:| … |\@@_end_line:|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_vtop_of_code:n #1
  {
    \vbox_top:n
      {
        \hsize = \l_@@_code_width_dim 
        \language = -1
        \raggedright 
        \strut 
        \@@_replace_spaces:n { #1 }
        \strut \hfil 
      }  
  }
%    \end{macrocode}
% 
% \bigskip
% The following command will be used when the key |background-color| is used or when
% the key |line-numbers| is used in conjunction with |line-numbers/position=right|.
%
% The content of the line has been previously set in |\l_@@_line_box|.
%
% That command is used only once, in |\@@_add_bg_and_right_nb_to_output_box:|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_add_bg_and_right_nb_to_line_and_use:
  {
    \vtop
      {
        \offinterlineskip
        \hbox
          {
%    \end{macrocode}
% The command |\@@_compute_and_set_color:| sets the current color but also sets the booleans
% |\g_@@_color_is_none_bool| and |\g_@@_next_color_is_none_bool|. It uses the
% current value of |\l_@@_bg_color_clist|, the value of |\g_@@_line_int| (the number of the
% current line) but also potential token lists of the form |\g_@@_color_12_tl| if the end
% user has used the command |\rowcolor|.
%    \begin{macrocode}
            \group_begin:
            \@@_compute_and_set_color:
%    \end{macrocode}
% The colored panels are overlapping. However, if the special color |none| is used
% we must not put such overlapping.
%    \begin{macrocode}
            \dim_set:Nn \l_tmpa_dim { \box_dp:N \l_@@_line_box }
            \bool_if:NT \g_@@_next_color_is_none_bool
              { \dim_sub:Nn \l_tmpa_dim { 2.5 pt } }
%    \end{macrocode}
% When |\g_@@_color_is_none_bool| is in force, we will compose a |\vrule| of
% width 0~pt. We need that |\vrule| because it will be a strut.
%    \begin{macrocode}
            \bool_if:NTF \g_@@_color_is_none_bool
              { \dim_zero:N \l_tmpb_dim }
              { \dim_set_eq:NN \l_tmpb_dim \l_@@_listing_width_dim }
            \dim_set:Nn \l_@@_tmpc_dim { \box_ht:N \l_@@_line_box }
%    \end{macrocode}
% Now, the colored panel.
%    \begin{macrocode}
            \dim_compare:nNnTF \l_@@_rounded_corners_dim > \c_zero_dim
              {
                \int_compare:nNnTF \g_@@_line_int = \c_one_int
                  {
                    \begin{tikzpicture}[baseline = 0cm]
                    \fill (0,0)
                          [rounded~corners = \l_@@_rounded_corners_dim]
                          -- (0,\l_@@_tmpc_dim)
                          -- (\l_tmpb_dim,\l_@@_tmpc_dim)
                          [sharp~corners] -- (\l_tmpb_dim,-\l_tmpa_dim)
                          -- (0,-\l_tmpa_dim)
                          -- cycle ;
                    \end{tikzpicture}                    
                  }
                  {
                    \int_compare:nNnTF \g_@@_line_int = \g_@@_nb_lines_int
                      {
                        \begin{tikzpicture}[baseline = 0cm]
                        \fill (0,0) -- (0,\l_@@_tmpc_dim)
                              -- (\l_tmpb_dim,\l_@@_tmpc_dim)
                              [rounded~corners = \l_@@_rounded_corners_dim]
                              -- (\l_tmpb_dim,-\l_tmpa_dim)
                              -- (0,-\l_tmpa_dim)
                              -- cycle ;
                        \end{tikzpicture}                    
                      }
                      {
                        \vrule height \l_@@_tmpc_dim
                        depth \l_tmpa_dim
                        width \l_tmpb_dim
%    \end{macrocode}
% For the case when |line-numbers/position=right| is in force with |line-numbers|.
%    \begin{macrocode}
                        % added 2026-01-02
                        \dim_compare:nNnT \l_tmpb_dim = \c_zero_dim                         
                          { \skip_horizontal:N \l_@@_listing_width_dim }
                      }
                  }
              }
              {
                \vrule height \l_@@_tmpc_dim
                depth \l_tmpa_dim
                width \l_tmpb_dim
%    \end{macrocode}
% For the case when |line-numbers/position=right| is in force with |line-numbers|.
%    \begin{macrocode}
                % added 2026-01-02
                \dim_compare:nNnT \l_tmpb_dim = \c_zero_dim 
                  { \skip_horizontal:N \l_@@_listing_width_dim }
              }
%    \end{macrocode}
% The group is for the color of the background.
%    \begin{macrocode}
            \group_end:
            % added 2026-01-02
            \bool_if:NT \l_@@_line_numbers_bool
              {
                \str_if_eq:eeT \l_@@_line_numbers_position_str { right }
                  {
                    \seq_gpop_right:NN \g_@@_visual_line_numbers_seq \l_tmpa_tl
                    \@@_print_number_right:
                  }
              }
          }
        \bool_if:NT \g_@@_next_color_is_none_bool
          { \skip_vertical:n { 2.5 pt } }
        \skip_vertical:n { - \box_ht_plus_dp:N \l_@@_line_box } 
        \box_use_drop:N \l_@@_line_box
      }
  }
%    \end{macrocode}
% End of |\@@_add_bg_and_right_nb_to_line_and_use:|
%
% 
% \bigskip
% The command |\@@_compute_and_set_color:| sets the current color but also sets the booleans
% |\g_@@_color_is_none_bool| and |\g_@@_next_color_is_none_bool|. It uses the
% current value of |\l_@@_bg_color_clist|, the value of
% |\g_@@_line_int| (the number of the current line) but also potential token lists
% of the form |\g_@@_color_12_tl| if the end user has used the command |\rowcolor|.
%    \begin{macrocode}
\cs_set_protected:Npn \@@_compute_and_set_color: 
  {
    \int_compare:nNnTF \l_@@_bg_colors_int = \c_zero_int 
      { \tl_set:Nn \l_tmpa_tl { none } }
      {
        \int_set:Nn \l_tmpb_int
          { \int_mod:nn \g_@@_line_int \l_@@_bg_colors_int + 1 }
        \tl_set:Ne \l_tmpa_tl { \clist_item:Nn \l_@@_bg_color_clist \l_tmpb_int }
      }
%    \end{macrocode}
% The row may have a color specified by the command |\rowcolor|. We check that point now.
%    \begin{macrocode}
    \cs_if_exist:cT { g_@@_color_ \int_use:N \g_@@_line_int _ tl }
      {
        \tl_set_eq:Nc \l_tmpa_tl { g_@@_color_ \int_use:N \g_@@_line_int _ tl }
%    \end{macrocode}
% We don't need any longer the variable and that's why we delete it (it must be free
% for the next environment of \pkg{piton}).
%    \begin{macrocode}
        \cs_undefine:c { g_@@_color_ \int_use:N \g_@@_line_int _ tl }
      }
    \tl_if_eq:NnTF \l_tmpa_tl { none }
      { \bool_gset_true:N \g_@@_color_is_none_bool }
      {
        \bool_gset_false:N \g_@@_color_is_none_bool
        \@@_color:o \l_tmpa_tl
      }
%    \end{macrocode}
% We are looking for the next color because we have to know whether that
% color is the special color |none| (for the vertical adjustment of the background color).
%    \begin{macrocode}
    \int_compare:nNnTF { \g_@@_line_int + 1 } = \g_@@_nb_lines_int
      { \bool_gset_false:N \g_@@_next_color_is_none_bool }
      {
        \int_compare:nNnTF \l_@@_bg_colors_int = \c_zero_int
          { \tl_set:Nn \l_tmpa_tl { none } }
          {
            \int_set:Nn \l_tmpb_int
              { \int_mod:nn { \g_@@_line_int + 1 } \l_@@_bg_colors_int + 1 }
            \tl_set:Ne \l_tmpa_tl { \clist_item:Nn \l_@@_bg_color_clist \l_tmpb_int }
          }
        \cs_if_exist:cT { g_@@_color_ \int_eval:n { \g_@@_line_int + 1 } _ tl }
          {
            \tl_set_eq:Nc \l_tmpa_tl
              { g_@@_color_ \int_eval:n { \g_@@_line_int + 1 } _ tl }
          }     
        \tl_if_eq:NnTF \l_tmpa_tl { none }
          { \bool_gset_true:N \g_@@_next_color_is_none_bool }
          { \bool_gset_false:N \g_@@_next_color_is_none_bool }
      }
  }
%    \end{macrocode}
%
%
% The following command |\@@_color:n| will accept both the instruction
% |\@@_color:n { red!15 }| and the instruction |\@@_color:n { [rgb]{0.9,0.9,0} }|.
%    \begin{macrocode}
\cs_set_protected:Npn \@@_color:n #1
  {
    \tl_if_head_eq_meaning:nNTF { #1 } [ 
      { 
        \tl_set:Nn \l_tmpa_tl { #1 }
        \tl_set_rescan:Nno \l_tmpa_tl { } \l_tmpa_tl 
        \exp_last_unbraced:No \color \l_tmpa_tl
      }
      { \color { #1 } }
  }
\cs_generate_variant:Nn \@@_color:n { o }
%    \end{macrocode}
% 
% \bigskip
% The command |\@@_par:| will be inserted by Lua between two lines of the
% computer listing.
% \begin{itemize}
% \item In fact, it will be inserted between two commands
% |\@@_begin_line:|...|\@@_end_of_line:|. 
% \item When the key |break-lines-in-Piton| is in force, a line of the
% computer listing (the \emph{input}) may result in several lines in the
% \textsc{pdf} (the \emph{output}). 
% \item Remind that |\@@_par:| has a rather complex behaviour because it will
% finish and start paragraphs.
% \end{itemize}
%    \begin{macrocode}
\cs_new_protected:Npn \@@_par:
  { 
%    \end{macrocode}
% We recall that |\g_@@_line_int| is \emph{not} used for the number of line
% printed in the \textsc{pdf} (when |line-numbers| is in force)...
%    \begin{macrocode}
    \int_gincr:N \g_@@_line_int
%    \end{macrocode}
% ... it will be used to allow or disallow page breaks, and also by the command
% |\rowcolor|.
%
%
% Each line in the listing is composed in a box of TeX (which may contain
% several lines when the key |break-lines-in-Piton| is in force) put in a
% paragraph. 
%    \begin{macrocode}
    \par 
%    \end{macrocode}
% We now add a |\kern| because each line of code is overlapping vertically by a
% quantity of 2.5~pt in order to have a good background (when |background-color|
% is in force). We need to use a |\kern| (in fact |\par\kern...|) and not a
% |\vskip| because page breaks should \emph{not} be allowed on that kern.
%    \begin{macrocode}
    \kern -2.5 pt 
%    \end{macrocode}
% Now, we control page breaks after the paragraph. 
%    \begin{macrocode}
    \@@_add_penalty_for_the_line:
  } 
%    \end{macrocode}
% After the command |\@@_par:|, we will usually have a command |\@@_begin_line:|.
%
% \bigskip
% The following command |\@@_breakable_space:| is for breakable spaces in the
% environments |{Piton}| and the listings of |\PitonInputFile| and \emph{not} for the
% commands |\piton|.
%    \begin{macrocode}
\cs_set_protected:Npn \@@_breakable_space:
  { 
    \discretionary 
      { \hbox:n { \color { gray } \l_@@_end_of_broken_line_tl } } 
      { 
        \hbox_overlap_left:n 
          { 
            { 
              \normalfont \footnotesize \color { gray } 
              \l_@@_continuation_symbol_tl 
            } 
            \skip_horizontal:n { 0.3 em }
            \int_compare:nNnT \l_@@_bg_colors_int > \c_zero_int 
              { \skip_horizontal:n { 0.5 em } }
          }  
        \bool_if:NT \l_@@_indent_broken_lines_bool
          { 
            \hbox:n
              { 
                \prg_replicate:nn { \g_@@_indentation_int } { ~ } 
                { \color { gray } \l_@@_csoi_tl }
              } 
          } 
      } 
      { \hbox { ~ } }
  }
%    \end{macrocode}
% 
% \bigskip
% \subsection{PitonOptions}
%
%
%
% \medskip
%    \begin{macrocode}
\bool_new:N \l_@@_line_numbers_bool 
\bool_new:N \l_@@_skip_empty_lines_bool 
\bool_set_true:N \l_@@_skip_empty_lines_bool 
\bool_new:N \l_@@_line_numbers_absolute_bool
\tl_new:N \l_@@_line_numbers_format_tl
\tl_set:Nn \l_@@_line_numbers_format_tl { \footnotesize \color { gray } }
\bool_new:N \l_@@_label_empty_lines_bool
\bool_set_true:N \l_@@_label_empty_lines_bool 
\int_new:N \l_@@_number_lines_start_int
\str_new:N \l_@@_line_numbers_position_str
\str_set:Nn \l_@@_line_numbers_position_str { left }
\bool_new:N \l_@@_resume_bool 
\bool_new:N \g_@@_label_as_zlabel_bool
%    \end{macrocode}
% 
%
%  \bigskip
%    \begin{macrocode}
\keys_define:nn { PitonOptions / marker }
  {
    beginning .cs_set:Np = \@@_marker_beginning:n #1 ,       
    beginning .value_required:n = true , 
    end .cs_set:Np = \@@_marker_end:n #1 ,   
    end .value_required:n = true ,
    include-lines .bool_set:N = \l_@@_marker_include_lines_bool ,
    unknown .code:n = \@@_error:n { Unknown~key~for~marker } 
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\keys_define:nn { PitonOptions / line-numbers }
  {
    true .code:n = \bool_set_true:N \l_@@_line_numbers_bool , 
    false .code:n = \bool_set_false:N \l_@@_line_numbers_bool , 

    start .code:n = 
      \bool_set_true:N \l_@@_line_numbers_bool 
      \int_set:Nn \l_@@_number_lines_start_int { #1 }  ,
    start .value_required:n = true ,

    skip-empty-lines .code:n = 
      \bool_if:NF \l_@@_in_PitonOptions_bool
        { \bool_set_true:N \l_@@_line_numbers_bool }
      \str_if_eq:nnTF { #1 } { false }
        { \bool_set_false:N \l_@@_skip_empty_lines_bool } 
        { \bool_set_true:N \l_@@_skip_empty_lines_bool } ,

    label-empty-lines .code:n = 
      \bool_if:NF \l_@@_in_PitonOptions_bool
        { \bool_set_true:N \l_@@_line_numbers_bool }
      \str_if_eq:nnTF { #1 } { false }
        { \bool_set_false:N \l_@@_label_empty_lines_bool } 
        { \bool_set_true:N \l_@@_label_empty_lines_bool } ,

    absolute .code:n = 
      \bool_if:NTF \l_@@_in_PitonOptions_bool
        { \bool_set_true:N \l_@@_line_numbers_absolute_bool }
        { \bool_set_true:N \l_@@_line_numbers_bool }
      \bool_if:NT \l_@@_in_PitonInputFile_bool 
        { 
          \bool_set_true:N \l_@@_line_numbers_absolute_bool 
          \bool_set_false:N \l_@@_skip_empty_lines_bool 
        } ,
    absolute .value_forbidden:n = true ,

    resume .code:n = 
      \bool_set_true:N \l_@@_resume_bool 
      \bool_if:NF \l_@@_in_PitonOptions_bool 
        { \bool_set_true:N \l_@@_line_numbers_bool } , 
    resume .value_forbidden:n = true ,

    sep .dim_set:N = \l_@@_numbers_sep_dim ,
    sep .value_required:n = true ,
    sep .initial:n = 0.7 em , 

    step .int_set:N = \l_@@_numbers_step_int ,
    step .initial:n = 1 ,
    step .value_required:n = true ,

    position .choices:nn = { left , right }
      { \str_set_eq:NN \l_@@_line_numbers_position_str \l_keys_choice_tl } , 
    position .value_required:n = true ,

    format .tl_set:N = \l_@@_line_numbers_format_tl ,
    format .value_required:n = true ,

    unknown .code:n =
      \@@_unknown_key:nn
        { PitonOptions / line-numbers }
        { Unknown~key~for~line-numbers }
      
  }
%    \end{macrocode}
%
%
% \bigskip
% Be careful! The name of the following set of keys must be considered as
% public! Hence, it should \emph{not} be changed.
% 
%    \begin{macrocode}
\keys_define:nn { PitonOptions }
  {
    indentations-for-Foxit .choices:nn = { true , false }
      {
        \tl_if_eq:VnTF \l_keys_value_tl { true }
          { \@@_define_leading_space_Foxit: }
          { \@@_define_leading_space_normal: }
      } ,
    box .choices:nn = { c , t , b , m }
      { \str_set_eq:NN \l_@@_box_str \l_keys_choice_tl } , 
    box .default:n = c ,
    break-strings-anywhere .bool_set:N = \l_@@_break_strings_anywhere_bool ,
    break-numbers-anywhere .bool_set:N = \l_@@_break_numbers_anywhere_bool ,
%    \end{macrocode}
% First, we put keys that should be available only in the preamble.
%    \begin{macrocode}
    detected-commands .code:n =
      \clist_if_in:nnTF { #1 } { rowcolor }
        {
          \@@_error:n { rowcolor~in~detected-commands }
          \clist_set:Nn \l_tmpa_clist { #1 }
          \clist_remove_all:Nn \l_tmpa_clist { rowcolor }
          \clist_put_right:No \l_@@_detected_commands_clist \l_tmpa_clist 
        }
        { \clist_put_right:Nn \l_@@_detected_commands_clist { #1 } } ,
    detected-commands .value_required:n = true , 
    detected-commands .usage:n = preamble ,
    vertical-detected-commands .code:n = \@@_vertical_commands:n { #1 } ,
    vertical-detected-commands .value_required:n = true , 
    vertical-detected-commands .usage:n = preamble , 
    raw-detected-commands .code:n = 
      \clist_put_right:Nn \l_@@_raw_detected_commands_clist { #1 } ,
    raw-detected-commands .value_required:n = true , 
    raw-detected-commands .usage:n = preamble , 
    detected-beamer-commands .code:n = 
      \@@_error_if_not_in_beamer:
      \clist_put_right:Nn \l_@@_beamer_commands_clist { #1 } ,
    detected-beamer-commands .value_required:n = true , 
    detected-beamer-commands .usage:n = preamble , 
    detected-beamer-environments .code:n = 
      \@@_error_if_not_in_beamer:
      \clist_put_right:Nn \l_@@_beamer_environments_clist { #1 } ,
    detected-beamer-environments .value_required:n = true , 
    detected-beamer-environments .usage:n = preamble , 
%    \end{macrocode}
%
% 
% Remark that the command |\lua_escape:n| is fully expandable. That's why we use
% |\lua_now:e|.
%    \begin{macrocode}
    begin-escape .code:n = 
      \lua_now:e { piton.begin_escape = "\lua_escape:n{#1}" } ,
    begin-escape .value_required:n = true , 
    begin-escape .usage:n = preamble , 

    end-escape   .code:n = 
      \lua_now:e { piton.end_escape = "\lua_escape:n{#1}" } ,
    end-escape   .value_required:n = true ,
    end-escape .usage:n = preamble ,

    begin-escape-math .code:n = 
      \lua_now:e { piton.begin_escape_math = "\lua_escape:n{#1}" } ,
    begin-escape-math .value_required:n = true , 
    begin-escape-math .usage:n = preamble ,

    end-escape-math .code:n = 
      \lua_now:e { piton.end_escape_math = "\lua_escape:n{#1}" } ,
    end-escape-math .value_required:n = true ,
    end-escape-math .usage:n = preamble ,

    comment-latex .code:n = \lua_now:n { comment_latex = "#1" } ,   
    comment-latex .value_required:n = true ,
    comment-latex .usage:n = preamble ,

    label-as-zlabel .bool_gset:N = \g_@@_label_as_zlabel_bool ,
    label-as-zlabel .usage:n = preamble ,

    math-comments .bool_gset:N = \g_@@_math_comments_bool ,
    math-comments .usage:n = preamble , 
%    \end{macrocode}
% 
% \bigskip
% Now, general keys.
%    \begin{macrocode}
    language      .code:n = 
      \str_set:Ne \l_piton_language_str { \str_lowercase:n { #1 } } , 
    language      .value_required:n  = true ,
    path          .code:n = 
      \seq_clear:N \l_@@_path_seq
      \clist_map_inline:nn { #1 }
        { 
          \str_set:Nn \l_tmpa_str { ##1 } 
          \seq_put_right:No \l_@@_path_seq { \l_tmpa_str }
        } ,
    path             .value_required:n  = true , 
%    \end{macrocode}
% The initial value of the key |path| is not empty: it's |.|, that is to say a
% comma separated list with only one component which is |.|, the current directory.
%    \begin{macrocode}
    path             .initial:n         = . ,
    path-write       .str_set:N         = \l_@@_path_write_str ,
    path-write       .value_required:n  = true , 
    font-command     .tl_set:N          = \l_@@_font_command_tl ,
    font-command     .initial:n         = \ttfamily , 
    font-command     .value_required:n  = true ,
    font-command+    .code:n
      = { \tl_put_right:Nn \l_@@_font_command_tl { #1 } } ,
    font-command+    .value_required:n  = true ,
    font-command~+   .meta:n            = { font-command+ = #1 } ,
    font-command~+   .value_required:n  = true ,
    gobble           .int_set:N         = \l_@@_gobble_int , 
    gobble           .default:n         = -1 ,
    auto-gobble      .code:n            = \int_set:Nn \l_@@_gobble_int { -1 } , 
    auto-gobble      .value_forbidden:n = true ,
    env-gobble       .code:n            = \int_set:Nn \l_@@_gobble_int { -2 } , 
    env-gobble       .value_forbidden:n = true ,
    tabs-auto-gobble .code:n            = \int_set:Nn \l_@@_gobble_int { -3 } , 
    tabs-auto-gobble .value_forbidden:n = true ,

    splittable-on-empty-lines .bool_set:N = \l_@@_splittable_on_empty_lines_bool ,

    split-on-empty-lines .bool_set:N = \l_@@_split_on_empty_lines_bool ,
%    \end{macrocode}    
% When the key |split-on-empty-lines| is in force, the correspondint token
% list will be inserted between the chunks of code (the computer listing provided
% by the end user is split in chunks on the empty lines in the code).
% % That parameter must contain elements to be inserted in \emph{vertical} mode by
% TeX. 
%    \begin{macrocode}
    split-separation .tl_set:N         = \l_@@_split_separation_tl ,
    split-separation .value_required:n = true ,
    split-separation .initial:n = \vspace { \baselineskip } \vspace { -1.25pt } ,

    split-separation+ .code:n = 
      \tl_put_right:Nn \l_@@_split_separation_tl { #1 } ,
    split-separation+ .value_required:n = true ,
    split-separation~+ .meta:n = { split-separation+ = #1 } ,    
    add-to-split-separation .meta:n = { split-separation+ = #1 } ,    
 
    marker .code:n = 
      \bool_lazy_or:nnTF
        \l_@@_in_PitonInputFile_bool 
        \l_@@_in_PitonOptions_bool 
        { \keys_set:nn { PitonOptions / marker } { #1 } } 
        { \@@_error:n { Invalid~key } } , 
    marker .value_required:n = true , 

    line-numbers .code:n = 
      \keys_set:nn { PitonOptions / line-numbers } { #1 } ,
%    \end{macrocode}
% The following line is mandatory.
%    \begin{macrocode}
    line-numbers .default:n = true ,       
%    \end{macrocode}
% 
% \medskip
% The following counter corresponds to the key |splittable| of |\PitonOptions|.
% If the value of |\l_@@_splittable_int| is equal to $n$, then no line break can
% occur within the first $n$~lines or the last $n$~lines of a listing (or a
% \emph{chunk} of listings when the key |split-on-empty-lines| is in force).
%    \begin{macrocode}
    splittable       .int_set:N         = \l_@@_splittable_int ,
    splittable       .default:n         = 1 ,
    splittable       .initial:n         = 100 ,
    background-color .code:n =
      \clist_set:Nn \l_@@_bg_color_clist { #1 }
%    \end{macrocode}
% We keep the lenght of the clist |\l_@@_bg_color_clist| in a counter for efficiency only.
%    \begin{macrocode}
      \int_set:Nn \l_@@_bg_colors_int { \clist_count:N \l_@@_bg_color_clist } ,
    background-color .value_required:n  = true ,
%    \end{macrocode}
% The package \pkg{piton} will also detect the lines of code which correspond to
% the user input in a Python console, that is to say the lines of code beginning
% with |>>>| and |...|. It's possible, with the key |prompt-background-color|,
% to require a background for these lines of code (and the other lines of code
% will have the standard background color specified by |background-color|).
%    \begin{macrocode}
    prompt-background-color .tl_set:N         = \l_@@_prompt_bg_color_tl ,
    prompt-background-color .value_required:n = true ,
    prompt-background-color .initial:n        = gray!15 , 
%    \end{macrocode}
% With the tuning |write=false|, the content of the environment won't be parsed
% and won't be printed on the \textsc{pdf}. However, the Lua variables |piton.last_code|
% and |piton.last_language| will be set (and, hence, |piton.get_last_code| will be
% operational). The keys |join| and |write| will be honoured.
% \begin{macrocode}
    print .bool_set:N = \l_@@_print_bool ,
    print .value_required:n = true ,
    print .initial:n = true , 

    width .code:n = 
      \str_if_eq:nnTF  { #1 } { min } 
        { 
          \bool_set_true:N \l_@@_minimize_width_bool 
          \dim_zero:N \l_@@_width_dim 
        }
        { 
          \bool_set_false:N \l_@@_minimize_width_bool
          \dim_set:Nn \l_@@_width_dim { #1 } 
        } , 
    width .value_required:n  = true ,

    max-width .code:n =
      \bool_set_true:N \l_@@_minimize_width_bool
      \dim_set:Nn \l_@@_width_dim { #1 } ,
    max-width .value_required:n = true ,

    paperclip .code:n =
      \bool_set_true:N \l_@@_paperclip_bool 
      \tl_if_novalue:nTF { #1 }
        { \str_set:Nn \l_@@_paperclip_str { } }
        { \str_set:Nn \l_@@_paperclip_str { #1 } } ,

    annotation .bool_set:N = \l_@@_annotation_bool ,
    
    write .str_set:N = \l_@@_write_str ,
    write .value_required:n = true ,
    no-write .code:n = \str_set_eq:NN \l_@@_write_str \c_empty_str ,
    no-write .value_forbidden:n = true ,
    join .code:n =
      \str_set:Nn \l_@@_join_str { #1 }
      \seq_if_in:NnF \g_@@_join_seq { #1 }
        { \seq_gput_right:No \g_@@_join_seq { #1 } } ,
    join .value_required:n = true ,
    join-separation .str_set:N = \l_@@_join_separation_str ,
    join-separation .value_required:n = true ,
    no-join .code:n = \str_set_eq:NN \l_@@_join_str \c_empty_str ,
    no-join .value_forbidden:n = true ,
    
    left-margin .code:n =
      \str_if_eq:nnTF { #1 } { auto }
        { 
          \dim_zero:N \l_@@_left_margin_dim 
          \bool_set_true:N \l_@@_left_margin_auto_bool
        }
        { 
          \dim_set:Nn \l_@@_left_margin_dim { #1 } 
          \bool_set_false:N \l_@@_left_margin_auto_bool
        } ,
    left-margin      .value_required:n  = true ,

    right-margin .code:n =
      \str_if_eq:nnTF { #1 } { auto }
        { 
          \dim_zero:N \l_@@_right_margin_dim 
          \bool_set_true:N \l_@@_right_margin_auto_bool
        }
        { 
          \dim_set:Nn \l_@@_right_margin_dim { #1 } 
          \bool_set_false:N \l_@@_right_margin_auto_bool
        } ,
    right-margin     .value_required:n  = true ,

    tab-size         .int_set:N         = \l_@@_tab_size_int ,
    tab-size         .value_required:n  = true ,
    tab-size         .initial:n         = 4 , 

    show-spaces      .bool_set:N        = \l_@@_show_spaces_bool ,
    show-spaces      .value_forbidden:n = true ,

    show-spaces-in-strings .code:n      = 
        \tl_set:Nn \l_@@_space_in_string_tl { ␣ } , % U+2423
    show-spaces-in-strings .value_forbidden:n = true ,

    break-lines-in-Piton .bool_set:N    = \l_@@_break_lines_in_Piton_bool ,
    break-lines-in-Piton .initial:n     = true ,
 
    break-lines-in-piton .bool_set:N    = \l_@@_break_lines_in_piton_bool ,

    break-lines .meta:n = { break-lines-in-piton , break-lines-in-Piton } , 
    break-lines .value_forbidden:n      = true ,

    indent-broken-lines .bool_set:N     = \l_@@_indent_broken_lines_bool ,

    end-of-broken-line  .tl_set:N       = \l_@@_end_of_broken_line_tl ,
    end-of-broken-line  .value_required:n = true ,
    end-of-broken-line  .initial:n      = \hspace* { 0.5em } \textbackslash ,

    continuation-symbol .tl_set:N       = \l_@@_continuation_symbol_tl ,
    continuation-symbol .value_required:n = true ,
    continuation-symbol .initial:n      = + ,    

    continuation-symbol-on-indentation .tl_set:N = \l_@@_csoi_tl ,
    continuation-symbol-on-indentation .value_required:n = true ,
    continuation-symbol-on-indentation .initial:n = $\hookrightarrow \;$ ,

    first-line .code:n = \@@_in_PitonInputFile:n 
      { \int_set:Nn \l_@@_first_line_int { #1 } } ,
    first-line .value_required:n = true ,

    last-line .code:n = \@@_in_PitonInputFile:n 
      { \int_set:Nn \l_@@_last_line_int { #1 } } ,
    last-line .value_required:n = true , 

    begin-range .code:n = \@@_in_PitonInputFile:n 
      { \str_set:Nn \l_@@_begin_range_str { #1 } } ,
    begin-range .value_required:n = true ,

    end-range .code:n = \@@_in_PitonInputFile:n 
      { \str_set:Nn \l_@@_end_range_str { #1 } } ,
    end-range .value_required:n = true ,

    range .code:n = \@@_in_PitonInputFile:n 
      { 
        \str_set:Nn \l_@@_begin_range_str { #1 } 
        \str_set:Nn \l_@@_end_range_str { #1 } 
      } ,
    range .value_required:n = true ,

    env-used-by-split .code:n = 
      \lua_now:n { piton.env_used_by_split = '#1' } , 
    env-used-by-split .initial:n = Piton ,

    resume .meta:n = line-numbers/resume , 

    unknown .code:n =
      \@@_unknown_key:nn
        { PitonOptions }
        { Unknown~key~for~PitonOptions } ,

    % deprecated
    all-line-numbers .code:n = 
      \bool_set_true:N \l_@@_line_numbers_bool 
      \bool_set_false:N \l_@@_skip_empty_lines_bool ,
%    \end{macrocode}
%
%    \begin{macrocode}
    rounded-corners .code:n =
      \AtBeginDocument
        {
          \IfPackageLoadedTF { tikz }
            { \dim_set:Nn \l_@@_rounded_corners_dim { #1 } }
            { \@@_err_rounded_corners_without_Tikz: }
        } ,
    rounded-corners .default:n = 4 pt         
  }          
%    \end{macrocode}
% 
%    \begin{macrocode}
\hook_gput_code:nnn { begindocument } { . }
  {
    \IfPackageLoadedTF { tcolorbox }
      {
        \pgfkeysifdefined { / tcb / libload / breakable }
          {
            \keys_define:nn { PitonOptions }
              {
                tcolorbox .bool_set:N = \l_@@_tcolorbox_bool ,
              }
          }
          {
            \keys_define:nn { PitonOptions }
              { tcolorbox .code:n = \@@_error:n { library~breakable~not~loaded } }
          }
      }
      {
        \keys_define:nn { PitonOptions }
          { tcolorbox .code:n = \@@_error:n { tcolorbox~not~loaded } }
      } 
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_err_rounded_corners_without_Tikz:
  {
    \@@_error:n { rounded-corners~without~Tikz }
    \cs_gset:Npn \@@_err_rounded_corners_without_Tikz: { }
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_in_PitonInputFile:n #1
  {
    \bool_if:NTF \l_@@_in_PitonInputFile_bool 
      { #1 }
      { \@@_error:n { Invalid~key } } 
  }
%    \end{macrocode}
%
% 
%
% \bigskip
%    \begin{macrocode}
\NewDocumentCommand \PitonOptions { m } 
  { 
    \bool_set_true:N \l_@@_in_PitonOptions_bool
    \keys_set:nn { PitonOptions } { #1 }
    \bool_set_false:N \l_@@_in_PitonOptions_bool
  }
%    \end{macrocode}
%
% 
% 
% \bigskip
% When using |\NewPitonEnvironment| a user may use |\PitonOptions| inside.
% However, the set of keys available should be different that in standard
% |\PitonOptions|. That's why we define a version of |\PitonOptions| with no
% restriction on the set of available keys and we will link that version to
% |\PitonOptions| in such environment.
%    \begin{macrocode}
\NewDocumentCommand \@@_fake_PitonOptions { } 
  { \keys_set:nn { PitonOptions } }
%    \end{macrocode}
% 
%
% 
% \bigskip
% \subsection{The numbers of the lines}
%
% \medskip
% The following counter will be used to count the lines in the code when the
% user requires the numbers of the lines to be printed (with |line-numbers|)
% whereas the counter |\g_@@_line_int| previously defined is \emph{not} used for
% that functionality.
%
%    \begin{macrocode}
\int_new:N \g_@@_visual_line_int 
%    \end{macrocode}
% 
%    \begin{macrocode}
\cs_new_protected:Npn \@@_incr_visual_line: 
  { \bool_if:NF \l_@@_skip_empty_lines_bool { \int_gincr:N \g_@@_visual_line_int } }
%    \end{macrocode}
%
% \bigskip
% The following command will be used when the numbers of lines are printed
% on the left (|line-numbers/position=left|). The number of line is in the counter
% |\g_@@_visual_line_int|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_print_number_left:
  {
    \hbox_overlap_left:n
      {
        \@@_actually_print_number:n { \int_to_arabic:n { \g_@@_visual_line_int } }
        \skip_horizontal:N \l_@@_numbers_sep_dim  
      }
  }
%    \end{macrocode}
%
% \bigskip
% The following command will be used when the numbers of lines are printed
% on the right (|line-numbers/position=right|). The number of line is in |\l_tmpa_tl|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_print_number_right:
  {
    \hbox_overlap_left:n
      {
        \@@_actually_print_number:n { \l_tmpa_tl }
        \int_compare:nNnT \l_@@_bg_colors_int > 0
          { \skip_horizontal:n { 0.1 em } }
      }
  }
%    \end{macrocode}
%
% |\@@_actually_print_number:| itself prints the number without the
% |\hbox_overlap_left:n|. It is used by both |\@@_print_number_left:| and
% |\@@_print_number_right:|
%    \begin{macrocode}
\cs_new_protected:Npn \@@_actually_print_number:n #1
  {
    \group_begin:
    \pdfextension literal { /Artifact << /ActualText (\space) >> BDC }
%    \end{macrocode}
% We put braces. Thus, the user may use the key |line-numbers/format| with a
% value such as |\fbox|. 
%    \begin{macrocode}
    \l_@@_line_numbers_format_tl { #1 }
    \pdfextension literal { EMC }      
    \group_end:
  }
%    \end{macrocode}
% 
% 
%
% 
% \bigskip
% \subsection{The main commands and environments for the end user}
%
% \bigskip
%    \begin{macrocode}
\NewDocumentCommand { \NewPitonLanguage } { O { } m ! o }
  {
    \tl_if_novalue:nTF { #3 }
%    \end{macrocode}
% The last argument is provided by curryfication.
%    \begin{macrocode}
      { \@@_NewPitonLanguage:nnn { #1 } { #2 } }
%    \end{macrocode}
% The two last arguments are provided by curryfication.
%    \begin{macrocode}
      { \@@_NewPitonLanguage:nnnnn { #1 } { #2 } { #3 } }
  }
%    \end{macrocode}
% 
% \bigskip
% The following property list will contain the definitions of the computer
% languages as provided by the end user. However, if a language is defined
% over another base language, the corresponding list will contain the \emph{whole}
% definition of the language.
%    \begin{macrocode}
\prop_new:N \g_@@_languages_prop
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
\keys_define:nn { NewPitonLanguage }
  {
    morekeywords .code:n = ,
    otherkeywords .code:n = , 
    sensitive .code:n = , 
    keywordsprefix .code:n = ,
    moretexcs .code:n = , 
    morestring .code:n = ,
    morecomment .code:n = ,
    moredelim .code:n = , 
    moredirectives .code:n = , 
    tag .code:n = , 
    alsodigit .code:n = , 
    alsoletter .code:n = , 
    alsoother .code:n = ,
    unknown .code:n = \@@_error:n { Unknown~key~NewPitonLanguage } 
  }
%    \end{macrocode}
%
% \bigskip
% The function |\@@_NewPitonLanguage:nnn| will be used when the language is
% \emph{not} defined above a base language (and a base dialect).
%    \begin{macrocode}
\cs_new_protected:Npn \@@_NewPitonLanguage:nnn #1 #2 #3 
  { 
%    \end{macrocode}
% We store in |\l_tmpa_tl| the name of the language with the potential dialect,
% that is to say, for example : |[AspectJ]{Java}|. We use |\tl_if_blank:nF|
% because the end user may have written |\NewPitonLanguage[ ]{Java}{...}|.
%    \begin{macrocode}
    \tl_set:Ne \l_tmpa_tl 
      { 
        \tl_if_blank:nF { #1 } { [ \str_lowercase:n { #1 } ] } 
        \str_lowercase:n { #2 } 
      }
%    \end{macrocode}
%
% The following set of keys is only used to raise an error when a key in unknown!
%    \begin{macrocode}
    \keys_set:nn { NewPitonLanguage } { #3 }
%    \end{macrocode}
% 
% We store in LaTeX the definition of the language because some languages may be
% defined with that language as base language.
%    \begin{macrocode}
    \prop_gput:Non \g_@@_languages_prop \l_tmpa_tl { #3 }
%    \end{macrocode}
% The Lua part of the package \pkg{piton} will be loaded in a
% |\AtBeginDocument|. Hence, we will put also in a |\AtBeginDocument| the
% use of the Lua function |piton.new_language| (which does the main job).
%    \begin{macrocode}
    \@@_NewPitonLanguage:on \l_tmpa_tl { #3 }
  }
%    \end{macrocode}
% 
%    \begin{macrocode}
\cs_new_protected:Npn \@@_NewPitonLanguage:nn #1 #2
  {
    \hook_gput_code:nnn { begindocument } { . }
      { \lua_now:e { piton.new_language("#1","\lua_escape:n{#2}") } }
  }
\cs_generate_variant:Nn \@@_NewPitonLanguage:nn { o }
%    \end{macrocode}
%
% \bigskip
% Now the case when the language is defined upon a base language.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_NewPitonLanguage:nnnnn #1 #2 #3 #4 #5
  {
%    \end{macrocode}
% We store in |\l_tmpa_tl| the name of the base language with the dialect, that
% is to say, for example : |[AspectJ]{Java}|. We use |\tl_if_blank:nF| because
% the end user may have used |\NewPitonLanguage[Handel]{C}[ ]{C}{...}|
%    \begin{macrocode}
    \tl_set:Ne \l_tmpa_tl 
      { 
        \tl_if_blank:nF { #3 } { [ \str_lowercase:n { #3 } ] } 
        \str_lowercase:n { #4 }
      } 
%    \end{macrocode}
% We retrieve in |\l_tmpb_tl| the definition (as provided by the end user) of
% that base language. Caution: |\g_@@_languages_prop| does not contain all the
% languages provided by \pkg{piton} but only those defined by using
% |\NewPitonLanguage|. 
%    \begin{macrocode}
    \prop_get:NoNTF \g_@@_languages_prop \l_tmpa_tl \l_tmpb_tl 
%    \end{macrocode}
% We can now define the new language by using the previous function.
%    \begin{macrocode}
      { \@@_NewPitonLanguage:nnno { #1 } { #2 } { #5 } \l_tmpb_tl }
      { \@@_error:n { Language~not~defined } }
  }
%    \end{macrocode}
%
%  \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_NewPitonLanguage:nnnn #1 #2 #3 #4
%    \end{macrocode}
% In the following line, we write |#4,#3| and not |#3,#4| because we want that the
% keys which correspond to base language appear before the keys which are added
% in the language we define.
%    \begin{macrocode}
  { \@@_NewPitonLanguage:nnn { #1 } { #2 } { #4 , #3 } }
\cs_generate_variant:Nn \@@_NewPitonLanguage:nnnn { n n n o }
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
\NewDocumentCommand { \piton } { }
  { \peek_meaning:NTF \bgroup { \@@_piton_standard } { \@@_piton_verbatim } }
%    \end{macrocode}
%
%    \begin{macrocode}
\NewDocumentCommand { \@@_piton_standard } { m }
  {
    \group_begin:
    \tl_if_eq:NnF \l_@@_space_in_string_tl { ␣ }
      {
%    \end{macrocode}
% Remind that, when |break-strings-anywhere| is in force, multiple commands |\-|
% will be inserted between the characters of the string to allow the breaks. The
% |\exp_not:N| before |\space| is mandatory.
%    \begin{macrocode}
        \bool_lazy_or:nnT
          \l_@@_break_lines_in_piton_bool
          \l_@@_break_strings_anywhere_bool
          { \tl_set:Nn \l_@@_space_in_string_tl { \exp_not:N \space } }
      }
%    \end{macrocode}
%
% \bigskip
% The following tuning of LuaTeX in order to avoid all breaks of lines on the
% hyphens. 
%    \begin{macrocode}
    \automatichyphenmode = 1
%    \end{macrocode}
% Remark that the argument of |\piton| (with the normal syntax) is expanded in
% the TeX sens, (see the |\tl_set:Ne| below) and that's why we can provide the
% following escapes to the end user:
%    \begin{macrocode}
    \cs_set_eq:NN \\ \c_backslash_str
    \cs_set_eq:NN \% \c_percent_str  
    \cs_set_eq:NN \{ \c_left_brace_str
    \cs_set_eq:NN \} \c_right_brace_str
    \cs_set_eq:NN \$ \c_dollar_str
%    \end{macrocode}
% The standard command |\␣| is \emph{not} expandable and we need here expandable
% commands. With the following code, we define an expandable command.
%    \begin{macrocode}
    \cs_set_eq:cN { ~ } \space 
%    \end{macrocode}
%
%    \begin{macrocode}
    \cs_set_eq:NN \@@_begin_line: \prg_do_nothing:
%    \end{macrocode}
%    
%    \bigskip
%    We redefine |\rowcolor| inside of |\piton| commands to do nothing.
%    \begin{macrocode}
    \cs_set_eq:NN \rowcolor \@@_noop_rowcolor
%    \end{macrocode}
%    
%    \begin{macrocode}
    \tl_set:Ne \l_tmpa_tl 
      { 
        \lua_now:e 
          { piton.ParseBis('\l_piton_language_str',token.scan_string()) }
          { #1 } 
      }
    \bool_if:NTF \l_@@_show_spaces_bool
      { \tl_replace_all:NVn \l_tmpa_tl \c_catcode_other_space_tl { ␣ } } % U+2423
      {
        \bool_if:NT \l_@@_break_lines_in_piton_bool
%    \end{macrocode}
% With the following line, the spaces of catacode 12 (which were not breakable)
% are replaced by |\space|, and, thus, become breakable.
%    \begin{macrocode}
          { \tl_replace_all:NVn \l_tmpa_tl \c_catcode_other_space_tl \space }
      }
%    \end{macrocode}
% The command |\text| is provided by the package \pkg{amstext} (loaded by
% \pkg{piton}). 
%    \begin{macrocode}
    \if_mode_math:
       \text { \l_@@_font_command_tl \l_tmpa_tl }
    \else:
       \l_@@_font_command_tl \l_tmpa_tl
    \fi: 
    \group_end:
  }
%    \end{macrocode}
%
% 
% \bigskip
%    \begin{macrocode}
\NewDocumentCommand { \@@_piton_verbatim } { v }
  {
    \group_begin:
    \automatichyphenmode = 1
    \cs_set_eq:NN \@@_begin_line: \prg_do_nothing:
%    \end{macrocode}
%    
%    \bigskip
%    We redefine |\rowcolor| inside of |\piton| commands to do nothing.
%    \begin{macrocode}
    \cs_set_eq:NN \rowcolor \@@_noop_rowcolor
%    \end{macrocode}
%    
%    \begin{macrocode}
    \tl_set:Ne \l_tmpa_tl 
      { 
        \lua_now:e 
          { piton.Parse('\l_piton_language_str',token.scan_string()) } 
          { #1 } 
      }
    \bool_if:NT \l_@@_show_spaces_bool
      { \tl_replace_all:NVn \l_tmpa_tl \c_catcode_other_space_tl { ␣ } } % U+2423
    \if_mode_math:
       \text { \l_@@_font_command_tl \l_tmpa_tl }
    \else:
       \l_@@_font_command_tl \l_tmpa_tl
    \fi: 
    \group_end:
  }
%    \end{macrocode}
%

%  \bigskip
%
%
%  \bigskip 
%  The following command does \emph{not} correspond to a user command. It will
%  be used when we will have to ``rescan'' some chunks of computer code. For
%  example, it will be the initial value of the Piton style |InitialValues| (the
%  default values of the arguments of a Python function).
%    \begin{macrocode}
\cs_new_protected:Npn \@@_piton:n #1
  { \tl_if_blank:nF { #1 } { \@@_piton_i:n { #1 } } }

\cs_new_protected:Npn \@@_piton_i:n #1
  { 
    \group_begin:
    \cs_set_eq:NN \@@_begin_line: \prg_do_nothing:
    \cs_set:cpn { pitonStyle _ \l_piton_language_str  _ Prompt } { }
    \cs_set:cpn { pitonStyle _ Prompt } { }
    \cs_set_eq:NN \@@_leading_space: \space 
    \cs_set_eq:NN \@@_trailing_space: \space
    \tl_set:Ne \l_tmpa_tl 
      { 
        \lua_now:e 
          { piton.ParseTer('\l_piton_language_str',token.scan_string()) } 
          { #1 } 
      }
    \bool_if:NT \l_@@_show_spaces_bool
      { \tl_replace_all:NVn \l_tmpa_tl \c_catcode_other_space_tl { ␣ } } % U+2423
    \@@_replace_spaces:o \l_tmpa_tl 
    \group_end:
  }
%    \end{macrocode}
%
%
% \bigskip
% |\@@_pre_composition:| will be used both in |\PitonInputFile| and
% in the environments such as |{Piton}|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_pre_composition:
  {
    \dim_compare:nNnT \l_@@_width_dim = \c_zero_dim
      {
        \dim_set_eq:NN \l_@@_width_dim \linewidth
%    \end{macrocode}
% When the key |box| is used, |width=min| is activated (except when
% |width| has been used with a numerical value).
%    \begin{macrocode}
        \str_if_empty:NF \l_@@_box_str
          { \bool_set_true:N \l_@@_minimize_width_bool }
      }
%    \end{macrocode}
% We compute |\l_@@_listing_width_dim|. However, if |max-width| is used (or
% |width=min| which uses |max-width|), that length will be computed
% again in |\@@_create_output_box:| but \textbf{even
% in the case}, we have to compute that value now (because the maximal width set
% by |max-width| may be reached by some lines of the listing---and those lines
% would be wrapped).
%    \begin{macrocode}
    \dim_set:Nn \l_@@_listing_width_dim
      {
        \bool_if:NTF \l_@@_tcolorbox_bool
          {
            \l_@@_width_dim - 
            ( \kvtcb@left@rule
            + \kvtcb@leftupper
            + \kvtcb@boxsep * 2
            + \kvtcb@rightupper
            + \kvtcb@right@rule )
          }
          { \l_@@_width_dim }
      }
%    \end{macrocode}
%    \begin{macrocode}
    \legacy_if:nT { @inlabel } { \bool_set_true:N \l_@@_in_label_bool }
    \automatichyphenmode = 1
    \bool_if:NF \l_@@_resume_bool { \int_gzero:N \g_@@_visual_line_int }
    \g_@@_def_vertical_commands_tl
    \int_gzero:N \g_@@_line_int
    \int_gzero:N \g_@@_nb_lines_int
    \dim_zero:N \parindent 
    \dim_zero:N \lineskip
    \dim_zero:N \parskip

    % added 2026-01-02
    \seq_gclear:N \g_@@_visual_line_numbers_seq
    
    \cs_set_eq:NN \rowcolor \@@_rowcolor:n
%    \end{macrocode}
% 
% For efficiency, we keep in |\l_@@_bg_colors_int| the length of |\l_@@_bg_color_clist|.
%    \begin{macrocode}
    \int_compare:nNnT \l_@@_bg_colors_int > { \c_zero_int }
      { \bool_set_true:N \l_@@_bg_bool }
    \bool_gset_false:N \g_@@_rowcolor_inside_bool
    \IfPackageLoadedTF { zref-base }
      {
        \bool_if:NTF \g_@@_label_as_zlabel_bool 
          { \cs_set_eq:NN \label \@@_zlabel:n }
          { \cs_set_eq:NN \label \@@_label:n }
        \cs_set_eq:NN \zlabel \@@_zlabel:n
      }
      { \cs_set_eq:NN \label \@@_label:n }
    \l_@@_font_command_tl
  }
%    \end{macrocode}
% 
%
% \bigskip
% When the parameters |line-numbers|, |line-numbers/position=left| and
% |left-margin| are in force (or if |line-numbers|, |line-numbers=right| and
% |right-margin| are in force), we have to compute the width of the maximal
% number of lines at the end of the environment to fix the correct value to
% |left-margin| (or |right-margin|).
%
% The command |\@@_compute_margin:N| will do that job.

% It's argument must be either |\l_@@_left_margin_dim| either |\l_@@_right_margin_dim|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_compute_margin:N #1
  {
     \use:e
       {
         \bool_if:NTF \l_@@_skip_empty_lines_bool
           { \lua_now:n { piton.CountNonEmptyLines(token.scan_argument()) } }
           { \lua_now:n { piton.CountLines(token.scan_argument()) } }
         { \l_@@_listing_tl } 
       }
     \hbox_set:Nn \l_tmpa_box
       {
         \l_@@_line_numbers_format_tl 
         \int_to_arabic:n 
           {
              \g_@@_visual_line_int
              +
              \bool_if:NTF \l_@@_skip_empty_lines_bool
                { \l_@@_nb_non_empty_lines_int }
                { \g_@@_nb_lines_int }
           }   
       }
     \dim_set:Nn #1 { \box_wd:N \l_tmpa_box + \l_@@_numbers_sep_dim + 0.1 em }
  }
%    \end{macrocode}
% 
%
%
% \bigskip
% The following command computes |\l_@@_code_width_dim|.
%
% It will be used only once (in |\@@_create_output_box:|).
%
% If there is a background (even a background with the color |none|), we
% subtract 0.5~em on both sides. However, if there is a left margin or a right
% margin, we use those margins. If the key |left-margin| has been used with the
% special value |auto| (this is meaningful only in conjonction with the key
% |line-numbers| and a value of |line-numbers/position| equal to |left|), the
% actual value for the left margin has yet computed (and stored in
% |left-margin|). Idem for the right margin.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_compute_code_width:
  {
    \dim_set:Nn \l_@@_code_width_dim
      {
        \l_@@_listing_width_dim
        -
        (
          \int_compare:nNnTF \l_@@_bg_colors_int > { \c_zero_int }
          {
            \dim_compare:nNnTF \l_@@_left_margin_dim > \c_zero_dim
              { \l_@@_left_margin_dim }            
              { 0.5 em }
            +
            \dim_compare:nNnTF \l_@@_right_margin_dim > \c_zero_dim
              { \l_@@_right_margin_dim }            
              { 0.5 em }
          }
          { \l_@@_left_margin_dim + \l_@@_right_margin_dim }          
        )
      }
  }
%    \end{macrocode}
%
% \bigskip
% The following command computes |\l_@@_listing_width_dim| and it will be used
% when |max-width| (or |width=min|) is used. Remind that the key |box| sets |width=min|
% (except when |width| is used with a numerical value).
%
% It will be used only once (in |\@@_create_output_box:|).
%
% The computation is the inverse of the computation done in |\@@_compute_code_width:|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_recompute_listing_width:
  {
    \dim_set:Nn \l_@@_listing_width_dim
      {
        \box_wd:N \g_@@_output_box
        +
        \int_compare:nNnTF \l_@@_bg_colors_int > \c_zero_int 
          {
            \dim_compare:nNnTF \l_@@_left_margin_dim > \c_zero_dim
              { \l_@@_left_margin_dim }            
              { 0.5 em }
            + 
            \dim_compare:nNnTF \l_@@_right_margin_dim > \c_zero_dim
              { \l_@@_right_margin_dim }            
              { 0.5 em }
          }
          { \l_@@_left_margin_dim + \l_@@_right_margin_dim }        
      }
  }          
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_store_body:n #1 
  {
%    \end{macrocode}
% Now, we have to replace all the occurrences of |\obeyedline| by a character of
% end of line (|\r| in the strings of Lua).
%    \begin{macrocode}
    \tl_set:Ne \obeyedline { \char_generate:nn { 13 } { 11 } }
    \tl_set:Ne \l_@@_listing_tl { #1 }
    \tl_set_eq:NN \ProcessedArgument \l_@@_listing_tl
  }
%    \end{macrocode}      
%
% The first argument of the following macro is one of the four strings:
% |New|, |Renew|, |Provide| and |Declare|.
%    \begin{macrocode}
\cs_new_protected:Nn \@@_DefinePitonEnvironment:nnnnn
  {
    \use:c { #1 DocumentEnvironment } { #2 } { #3 > { \@@_store_body:n } c } 
      {
        \cs_set_eq:NN \PitonOptions \@@_fake_PitonOptions
        #4
        \@@_pre_composition:
        \int_compare:nNnT { \l_@@_number_lines_start_int } > { \c_zero_int }
          { 
            \int_gset:Nn \g_@@_visual_line_int 
              { \l_@@_number_lines_start_int - 1 } 
          }
        \bool_if:NT \g_@@_beamer_bool
          { \@@_translate_beamer_env:o { \l_@@_listing_tl } }
        \bool_if:NT \g_@@_footnote_bool \savenotes 
        \@@_composition:
        \bool_lazy_or:nnT { \l_@@_paperclip_bool } { \l_@@_annotation_bool }
          { \@@_create_paperclip_annotation: }
        \bool_if:NT \g_@@_footnote_bool \endsavenotes 
        #5
      }
      { \ignorespacesafterend }  
  }    
%    \end{macrocode}
%
%
% \bigskip
% |\marginalia| is a command of the package \pkg{marginalia} (loaded by \pkg{piton}).
%    \begin{macrocode}
\cs_new_protected:Npn \@@_create_paperclip_annotation:
  {
    \marginalia
      {
        \vspace* { - 0.8 em }
        \hbox:n
          {
            \vrule~height~0~pt~depth~12~pt~width~0~pt
            \bool_if:NT \l_@@_annotation_bool
              {
                \lua_now:n
                  {
%    \end{macrocode}
% The function |piton.utf16| does a conversion from utf8 to utf16 big endian encoded in
% hexadecimal (with the \textsc{bom} of big endian), which is suitable to be put in
% a string between angular brackets of the \textsc{pdf}. It's easier for a stream!
%    \begin{macrocode}
                    pdf.immediateobj
                      ( "<" .. piton.utf16 ( piton.get_last_code ( ) ) .. ">" )
                  } 
                \pdfextension annot~width~5pt~height~10pt~depth~0pt
                  {
                    /Subtype /Text
                    /Contents~\pdf_object_ref_last:
                    /Name /Note
                    /Subj (Computer~listing)
%    \end{macrocode}
% The following tries to specify that the note should not receive answers (since it is meant
% for an easy copy-past of the computer listing).
%    \begin{macrocode}
                    /ReplyType /Group
%    \end{macrocode}
% Adds the bit 10 which means |LockedContents|.
%    \begin{macrocode}
                    /F~512
                    /C [0.8~0.8~0.8]
                  }
                \hspace* { 7 mm }
              }
            \bool_if:NT \l_@@_paperclip_bool { \@@_create_paperclip: }
          }
      }
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_create_paperclip:
  {
    \str_if_empty:NT \l_@@_paperclip_str
      {
        \int_gincr:N \g_@@_paperclip_int 
        \str_set:Ne \l_@@_paperclip_str { listing_\int_use:N \g_@@_paperclip_int .txt }
      }
%    \end{macrocode}
% Here, we don't understand why the |tostring| is mandatory.
%    \begin{macrocode}
    \lua_now:n { pdf.immediateobj ( "stream" , tostring ( piton.get_last_code() ) ) }
    \box_move_down:nn
      { 10 pt }
      {
        \hbox:n
          {
            \pdfextension annot~width~10pt~height~20pt~depth~0pt
              {
                /Subtype /FileAttachment
                /Name /Paperclip
                /F~8 % no zoom
%    \end{macrocode}
% |/Contents| will be used as info-bulle and description of the file in the panel of the
% embedded files.
%    \begin{macrocode}
                /Contents (The~computer~listing)
                /FS <<
                       /Type /Filespec
                       /F (\l_@@_paperclip_str)
                       /EF << /F~\pdf_object_ref_last: >> 
                       /AFRelationship /Supplement
                    >>
               }
          }
      }
  }
%    \end{macrocode}
% 
% 
% \bigskip
% For the following commands, the arguments are provided by curryfication.
%    \begin{macrocode}
\NewDocumentCommand { \NewPitonEnvironment } { }
  { \@@_DefinePitonEnvironment:nnnnn { New } }
%    \end{macrocode}
%
%    \begin{macrocode}
\NewDocumentCommand { \DeclarePitonEnvironment } { }
  { \@@_DefinePitonEnvironment:nnnnn { Declare } }
%    \end{macrocode}
%
%    \begin{macrocode}
\NewDocumentCommand { \RenewPitonEnvironment } { }
  { \@@_DefinePitonEnvironment:nnnnn { Renew } }
%    \end{macrocode}
%
%    \begin{macrocode}
\NewDocumentCommand { \ProvidePitonEnvironment } { }
  { \@@_DefinePitonEnvironment:nnnnn { Provide } }
%    \end{macrocode}
%
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_translate_beamer_env:n
  { \lua_now:e { piton.TranslateBeamerEnv(token.scan_argument ( ) ) } }
\cs_generate_variant:Nn \@@_translate_beamer_env:n { o }  
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_composition:
  {
    \str_if_empty:NT \l_@@_box_str
      {
        \mode_if_vertical:F
          { \bool_if:NF \l_@@_in_PitonInputFile_bool { \newline } }
      }
%    \end{macrocode}
%
%    \begin{macrocode}
    \bool_if:NT \l_@@_line_numbers_bool
      {
        \bool_lazy_and:nnT
          { \l_@@_left_margin_auto_bool }
          { \str_if_eq_p:ee \l_@@_line_numbers_position_str { left } }
          { \@@_compute_margin:N \l_@@_left_margin_dim }
        \bool_lazy_and:nnT
          { \l_@@_right_margin_auto_bool }
          { \str_if_eq_p:ee \l_@@_line_numbers_position_str { right } }
          { \@@_compute_margin:N \l_@@_right_margin_dim }
      }
%    \end{macrocode}
%
%    \begin{macrocode}
    \lua_now:e
      {
        piton.join_separation = "\l_@@_join_separation_str" 
        piton.join = "\l_@@_join_str"
        piton.write = "\l_@@_write_str"
        piton.path_write = "\l_@@_path_write_str"
      }
    \noindent
    \bool_if:NTF \l_@@_print_bool
      {
%    \end{macrocode}
% When |split-on-empty-lines| is in force, each chunk will be formated by an
% environment |{Piton}| (or the environment specified by |env-used-by-split|).
% Within each of these environments, we will come back here (but, of course,
% |split-on-empty-line| will have been set to |false|). The mechanism ``|retrieve|''
% is mandatory.
%    \begin{macrocode}
        \bool_if:NTF \l_@@_split_on_empty_lines_bool
          { \par \@@_retrieve_gobble_split_parse:o \l_@@_listing_tl }
          {
            \@@_create_output_box:
%    \end{macrocode}
% Now, the listing has been composed in |\g_@@_output_box| and |\l_@@_listing_width_dim|
% contains the width of the listing (with the potential margin for the numbers of lines).
%    \begin{macrocode}
            \bool_if:NTF \l_@@_tcolorbox_bool
              {
                \str_if_empty:NTF \l_@@_box_str
                  \@@_composition_iii: 
                  \@@_composition_iv: 
              }
              {
                \str_if_empty:NTF \l_@@_box_str
                  \@@_composition_i: 
                  \@@_composition_ii: 
              }
         }
      }
      { \@@_gobble_parse_no_print:o \l_@@_listing_tl }
  }
%    \end{macrocode}
%
% \bigskip
% |\@@_composition_i:| is for the main case: the key |tcolorbox| is not used, nor
% the key |box|.
%
% We can't do a mere |\vbox_unpack:N \g_@@_output_box| because that would not work
% inside a list of LaTeX (|{itemize}| or |{enumerate}|).
%
% The composition in the box |\g_@@_output_box| was mandatory to be able to deal
% with the case of a conjunction of the keys |width=min| and |background-color=...|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_composition_i:
  { 
%    \end{macrocode}
% First, we ``reverse'' the box |\g_@@_output_box|: we put in the box
% |\g_tmpa_box| the boxes present in |\g_@@_output_box|, but in reversed order.
% The vertical spaces and the penalties are discarded.
%    \begin{macrocode}
    \box_clear:N \g_tmpa_box
%    \end{macrocode}
% The box |\g_@@_line_box| will be used as an auxiliary box.
%    \begin{macrocode}
    \box_clear_new:N \g_@@_line_box
%    \end{macrocode}
% We unpack |\g_@@_output_box| in |\l_tmpa_box| used as a scratched box.
%    \begin{macrocode}
    \vbox_set:Nn \l_tmpa_box 
      {
        \vbox_unpack_drop:N \g_@@_output_box
        \bool_gset_false:N \g_tmpa_bool
        \unskip \unskip
        \bool_gset_false:N \g_tmpa_bool
        \bool_do_until:nn \g_tmpa_bool
          {
            \unskip \unskip \unskip
            \unpenalty \unkern
            \box_set_to_last:N \l_@@_line_box
            \box_if_empty:NTF \l_@@_line_box
              { \bool_gset_true:N \g_tmpa_bool }
              {
                \vbox_gset:Nn \g_tmpa_box
                  {
                    \vbox_unpack:N \g_tmpa_box
                    \box_use:N \l_@@_line_box
                  }
              }
          }
      }
%    \end{macrocode}
% Now, we will loop over the boxes in |\g_tmpa_box| and compose the
% boxes in the TeX flow.
%    \begin{macrocode}
    \bool_gset_false:N \g_tmpa_bool
    \int_zero:N \g_@@_line_int
    \bool_do_until:nn \g_tmpa_bool
      {
%    \end{macrocode}
% We retrieve the last box of |\g_tmpa_box| (and store it in |\g_@@_line_box|)
% and keep the other boxes in |\g_tmpa_box|.
%    \begin{macrocode}
        \vbox_gset:Nn \g_tmpa_box
          {
            \vbox_unpack_drop:N \g_tmpa_box
            \box_gset_to_last:N \g_@@_line_box
          }
%    \end{macrocode}
% If the box that we have retrieved is void, that means that, in fact, there is no
% longer boxes in |\g_tmpa_box| and we will exit the loop.
%    \begin{macrocode}
        \box_if_empty:NTF \g_@@_line_box
          { \bool_gset_true:N \g_tmpa_bool }
          {
            \box_use:N \g_@@_line_box
            \int_gincr:N \g_@@_line_int
            \par
            \kern -2.5 pt
%    \end{macrocode}
% We will determine the penalty by reading the Lua table |piton.lines_status|. That
% will use the current value of |\g_@@_line_int|.
%    \begin{macrocode}
            \@@_add_penalty_for_the_line:
%    \end{macrocode}
% We now add the instructions corresponding to the \emph{vertical detected commands}
% that are potentially used in the corresponding line of the listing.
%    \begin{macrocode}
            \cs_if_exist_use:cT { g_@@_after_line _ \int_use:N \g_@@_line_int _ tl }
              { \cs_undefine:c { g_@@_after_line _ \int_use:N \g_@@_line_int _ tl } }
            \int_compare:nNnT \g_@@_line_int < \g_@@_nb_lines_int 
              { \mode_leave_vertical: }
          }
      }
    \skip_vertical:n { 2.5 pt } 
  }      
%    \end{macrocode}
%
% \bigskip
% |\@@_composition_ii:| will be used when the key |box| is in force but \emph{not} the key
% |tcolorbox|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_composition_ii:
  {
    \use:e { \begin { minipage } [ \l_@@_box_str ] }
      { \l_@@_listing_width_dim }
%    \end{macrocode}
% Here, |\vbox_unpack:N|, instead of |\box_use:N| is mandatory for the vertical
% position of the box.
%    \begin{macrocode}
    \vbox_unpack:N \g_@@_output_box
%    \end{macrocode}
% |\kern| is mandatory here (|\skip_vertical:n| won't work).
%    \begin{macrocode}
    \kern 2.5 pt 
    \end { minipage }
  }
%    \end{macrocode}  
%
% \bigskip
% |\@@_composition_iii:| will be used when the key |tcolorbox| is in force but
% \emph{not} the key |box|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_composition_iii:
  {
    \use:e
      {
        \begin { tcolorbox }
%    \end{macrocode}    
% Even though we use the key |breakable| of |{tcolorbox}|, our environment will be
% breakable only when the key |splittable| of \pkg{piton} is used.
%    \begin{macrocode}
          [ breakable , text~width = \l_@@_listing_width_dim ]
      }
    \par 
    \vbox_unpack:N \g_@@_output_box
    \end { tcolorbox }
  }
%    \end{macrocode}
%
% \bigskip
% |\@@_composition_iv:| will be used when both keys |tcolorbox| and |box| are in force.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_composition_iv:
  {
    \use:e
      {
        \begin { tcolorbox }
          [
            hbox ,
            text~width = \l_@@_listing_width_dim ,
            nobeforeafter ,
            box~align =
              \str_case:Nn \l_@@_box_str 
                { 
                  t { top }
                  b { bottom }
                  c { center }
                  m { center }
                }
          ]
      }                                              
    \box_use:N \g_@@_output_box
    \end { tcolorbox }
  }                    
%    \end{macrocode}
% 
%
% \bigskip
% The following function will add the correct vertical penalty after
% a line of code in order to control the breaks of the pages.  We use the Lua table
% |piton.lines_status| which has been written by |piton.ComputeLinesStatus| for
% this aim. Each line has a ``status`` (equal to 0, 1 or 2) and that status
% directly says whether a break is allowed.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_add_penalty_for_the_line:
  {
    \int_case:nn
      { 
        \lua_now:e 
          { 
            tex.sprint
              ( piton.lines_status [ \int_use:N \g_@@_line_int ] )  
          } 
      }
      { 1 { \penalty 100 } 2 \nobreak }
  }
%    \end{macrocode}
%
% \bigskip
% |\@@_create_output_box:| is used only once, in |\@@_composition:|.
%
% It creates (and modifies when there are backgrounds or numbers of the lines
% on the right) |\g_@@_output_box|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_create_output_box:
  {
    \@@_compute_code_width:
    \vbox_gset:Nn \g_@@_output_box
      { \@@_retrieve_gobble_parse:o \l_@@_listing_tl }
    \bool_if:NT \l_@@_minimize_width_bool { \@@_recompute_listing_width: }
    \bool_lazy_any:nT
      {
        { \int_compare_p:nNn \l_@@_bg_colors_int > \c_zero_int } 
        { \g_@@_rowcolor_inside_bool }
        {
          \l_@@_line_numbers_bool
          &&
          \str_if_eq_p:ee \l_@@_line_numbers_position_str { right }
        }
      }
      \@@_add_bg_and_right_nb_to_output_box: 
  }
%    \end{macrocode}
%
%
% \bigskip
% We add the backgrounds after the composition of the box |\g_@@_output_box| by a
% loop over the lines in that box. Idem when the key |line-numbers| is used in
% conjunction with |line-numbers/position=right|.
%
% The backgrounds will have a width equal to |\l_@@_listing_width_dim|.
%
% That command will be used only once, in |\@@_create_output_box:|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_add_bg_and_right_nb_to_output_box:
  {
    \int_gset_eq:NN \g_@@_line_int \g_@@_nb_lines_int
%    \end{macrocode}
% |\l_tmpa_box| is only used to \emph{unpack} the vertical box |\g_@@_output_box|.
%    \begin{macrocode}
    \vbox_set:Nn \l_tmpa_box
      {
        \vbox_unpack_drop:N \g_@@_output_box
%    \end{macrocode}        
% We will raise |\g_tmpa_bool| to exit the loop |\bool_do_until:nn| below.
%    \begin{macrocode} 
        \bool_gset_false:N \g_tmpa_bool
        \unskip \unskip
%    \end{macrocode}
% We begin the loop.
%    \begin{macrocode}
        \bool_do_until:nn \g_tmpa_bool
          {
            \unskip \unskip \unskip
            \int_set_eq:NN \l_tmpa_int \lastpenalty
            \unpenalty \unkern
%    \end{macrocode}
% In standard TeX (not LuaTeX), the only way to loop over the sub-boxes of a given
% box is to use the TeX primitive |\lastbox| (via |\box_set_to_last:N| of L3).
% Of course, it would be interesting to replace that programming by a programming
% in Lua of LuaTeX...
%    \begin{macrocode}
            \box_set_to_last:N \l_@@_line_box
            \box_if_empty:NTF \l_@@_line_box
              { \bool_gset_true:N \g_tmpa_bool }
              {
%    \end{macrocode}
% |\g_@@_line_int| will be used in |\@@_add_bg_and_right_nb_to_line_and_use:|.
%    \begin{macrocode}
                \vbox_gset:Nn \g_@@_output_box
                  {
%    \end{macrocode}
% The command |\@@_add_bg_and_right_nb_to_line_and_use:| will add a background to
% the line (in |\l_@@_line_box|) but will also put the line in the current box.
% The background will have a width equal to |\l_@@_listing_width_dim|.
%    \begin{macrocode}
                    \@@_add_bg_and_right_nb_to_line_and_use:
                    \kern -2.5 pt 
                    \penalty \l_tmpa_int
                    \vbox_unpack:N \g_@@_output_box
                  }
              }
            \int_gdecr:N \g_@@_line_int
          }
      }
  }      
%    \end{macrocode}
% 
% \bigskip
% The following will be used when the end user has used |print=false|.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_gobble_parse_no_print:n
  {
    \lua_now:e
      {
        piton.GobbleParseNoPrint
         (
           '\l_piton_language_str' ,
           \int_use:N \l_@@_gobble_int ,
           token.scan_argument ( )
         )
      }
  }
\cs_generate_variant:Nn \@@_gobble_parse_no_print:n { o }
%    \end{macrocode}
% 
% \bigskip
% The following function will be used when the key |split-on-empty-lines| is not
% in force. It will retrieve the first empty line, gobble the spaces at the
% beginning of the lines and parse the code. The argument is provided by
% curryfication. 
%    \begin{macrocode}
\cs_new_protected:Npn \@@_retrieve_gobble_parse:n 
  {
    \lua_now:e 
      { 
        piton.RetrieveGobbleParse
          ( 
            '\l_piton_language_str' , 
            \int_use:N \l_@@_gobble_int ,
            \bool_if:NTF \l_@@_splittable_on_empty_lines_bool
              { \int_eval:n { - \l_@@_splittable_int } } 
              { \int_use:N \l_@@_splittable_int } ,
            token.scan_argument ( )
          ) 
      } 
  }
\cs_generate_variant:Nn \@@_retrieve_gobble_parse:n { o }
%    \end{macrocode}
%
% \bigskip
% The following function will be used when the key |split-on-empty-lines| is in
% force. It will gobble the spaces at the beginning of the lines (if the key
% |gobble| is in force), then split the code at the empty lines and, eventually,
% parse the code. The argument is provided by curryfication.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_retrieve_gobble_split_parse:n 
  {
    \lua_now:e 
      { 
        piton.RetrieveGobbleSplitParse 
          ( 
            '\l_piton_language_str' , 
            \int_use:N \l_@@_gobble_int ,
            \int_use:N \l_@@_splittable_int , 
            token.scan_argument ( )
          ) 
      } 
  }
\cs_generate_variant:Nn \@@_retrieve_gobble_split_parse:n { o }
%    \end{macrocode}
% 
% \bigskip
% Now, we define the environment |{Piton}|, which is the main environment
% provided by the package \pkg{piton}. Of course, you use |\NewPitonEnvironment|. 
%    \begin{macrocode}
\bool_if:NTF \g_@@_beamer_bool
  {
    \NewPitonEnvironment { Piton } { D < > { .- }  O { } }
      { 
        \keys_set:nn { PitonOptions } { #2 } 
        \begin { actionenv } < #1 > 
      }
      { \end { actionenv } } 
  }
  { 
    \NewPitonEnvironment { Piton } { O { } } 
      { \keys_set:nn { PitonOptions } { #1 } } 
      { } 
  }
%    \end{macrocode}
%
%
% \bigskip
%    \begin{macrocode}
\NewDocumentCommand { \PitonInputFileTF } { d < > O { } m m m }
  {
    \mode_if_vertical:F { \par }
    \group_begin:
    \seq_concat:NNN 
      \l_file_search_path_seq 
      \l_@@_path_seq
      \l_file_search_path_seq  
    \file_get_full_name:nNTF { #3 } \l_@@_file_name_str
      {
        \@@_input_file:nn { #1 } { #2 }
        #4
      }
      { #5 }
    \group_end:
  }
%    \end{macrocode}
%
% \medskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_unknown_file:n #1 
  { \msg_error:nnn { piton } { Unknown~file } { #1 } }
%    \end{macrocode}
% 
%    \begin{macrocode}
\NewDocumentCommand { \PitonInputFile } { d < > O { } m }
  {
    \PitonInputFileTF < #1 > [ #2 ] { #3 } { }
      {
%    \end{macrocode}
% The following line is for |latexmk| (suggestion of Y. Salmon).
%    \begin{macrocode}
        \iow_log:n { No~file~#3 }
        \@@_unknown_file:n { #3 }
      }
  }
\NewDocumentCommand { \PitonInputFileT } { d < > O { } m m }
  {
    \PitonInputFileTF < #1 >  [ #2 ] { #3 } { #4 }
      {
%    \end{macrocode}
% The following line is for |latexmk| (suggestion of Y. Salmon).
%    \begin{macrocode}
        \iow_log:n { No~file~#3 }
        \@@_unknown_file:n { #3 }
      }
  }
\NewDocumentCommand { \PitonInputFileF } { d < > O { } m m }
  { \PitonInputFileTF < #1 >  [ #2 ] { #3 } { } { #4 } }
%    \end{macrocode}
% 
% The following command uses as implicit argument the name of the file in
% |\l_@@_file_name_str|. 
%    \begin{macrocode}
\cs_new_protected:Npn \@@_input_file:nn #1 #2 
  {
%    \end{macrocode}
% We recall that, if we are in Beamer, the command |\PitonInputFile| is
% ``overlay-aware'' and that's why there is an optional argument between angular
% brackets (|<| and |>|).
%    \begin{macrocode}
    \tl_if_novalue:nF { #1 }
      {
        \bool_if:NTF \g_@@_beamer_bool
          { \begin { uncoverenv } < #1 > }     
          { \@@_error_or_warning:n { overlay~without~beamer } }
      }
    \group_begin:
%    \end{macrocode}    
% The following line is to allow tools such as |latexmk| to be aware that the
% file read by |\PitonInputFile| is loaded during the compilation of the LaTeX
% document. 
%    \begin{macrocode}
      \iow_log:e { (\l_@@_file_name_str) }
      \int_zero_new:N \l_@@_first_line_int
      \int_zero_new:N \l_@@_last_line_int 
      \int_set_eq:NN \l_@@_last_line_int \c_max_int
      \bool_set_true:N \l_@@_in_PitonInputFile_bool
      \keys_set:nn { PitonOptions } { #2 }
      \bool_if:NT \l_@@_line_numbers_absolute_bool
        { \bool_set_false:N \l_@@_skip_empty_lines_bool }
      \bool_if:nTF
        {
          ( 
            \int_compare_p:nNn \l_@@_first_line_int > \c_zero_int
            || \int_compare_p:nNn \l_@@_last_line_int < \c_max_int 
          )
          && ! \str_if_empty_p:N \l_@@_begin_range_str
        }
        { 
          \@@_error_or_warning:n { bad~range~specification } 
          \int_zero:N \l_@@_first_line_int
          \int_set_eq:NN \l_@@_last_line_int \c_max_int
        }
        { 
          \str_if_empty:NF \l_@@_begin_range_str 
            { 
              \@@_compute_range: 
              \bool_lazy_or:nnT 
                \l_@@_marker_include_lines_bool
                { ! \str_if_eq_p:NN \l_@@_begin_range_str \l_@@_end_range_str } 
                {
                  \int_decr:N \l_@@_first_line_int
                  \int_incr:N \l_@@_last_line_int
                }
            }
        }
      \@@_pre_composition:
      \bool_if:NT \l_@@_line_numbers_absolute_bool
        { \int_gset:Nn \g_@@_visual_line_int { \l_@@_first_line_int - 1 } } 
      \int_compare:nNnT \l_@@_number_lines_start_int > \c_zero_int 
        { 
          \int_gset:Nn \g_@@_visual_line_int 
            { \l_@@_number_lines_start_int - 1 } 
        }
%    \end{macrocode}
% The following case arises when the code |line-numbers/absolute| is in force
% without the use of a marked range.
%    \begin{macrocode}
      \int_compare:nNnT \g_@@_visual_line_int < \c_zero_int 
        { \int_gzero:N \g_@@_visual_line_int }
%    \end{macrocode}
% 
%    \begin{macrocode}
      \lua_now:e
        {
%    \end{macrocode}
% The following command will store the content of the file (or only a part of that file)
% in |\l_@@_listing_tl|.
%    \begin{macrocode}
          piton.ReadFile(
           '\l_@@_file_name_str' ,
           \int_use:N \l_@@_first_line_int , 
           \int_use:N \l_@@_last_line_int )
        }
      \@@_composition:
    \group_end:
%    \end{macrocode}
%
% 
% We recall that, if we are in Beamer, the command |\PitonInputFile| is
% ``overlay-aware'' and that's why we close now an environment |{uncoverenv}|
% that we have opened at the beginning of the command.
%    \begin{macrocode}
    \tl_if_novalue:nF { #1 }
      { \bool_if:NT \g_@@_beamer_bool { \end { uncoverenv } } }
  }
%    \end{macrocode}
% 
% \bigskip
% The following command computes the values of |\l_@@_first_line_int| and
% |\l_@@_last_line_int| when |\PitonInputFile| is used with textual markers. 
%    \begin{macrocode}
\cs_new_protected:Npn \@@_compute_range: 
  {
%    \end{macrocode}
% We store the markers in L3 strings (|str|) in order to do safely the following
% replacement of |\#|.
%    \begin{macrocode}
    \str_set:Ne \l_tmpa_str { \@@_marker_beginning:n { \l_@@_begin_range_str } }
    \str_set:Ne \l_tmpb_str { \@@_marker_end:n { \l_@@_end_range_str } }
%    \end{macrocode}
% We replace the sequences |\#| which may be present in the prefixes and
% suffixes added to the markers by the functions |\@@_marker_beginning:n| and
% |\@@_marker_end:n|. 
%    \begin{macrocode}
    \tl_replace_all:Nee \l_tmpa_str { \c_backslash_str \c_hash_str } \c_hash_str
    \tl_replace_all:Nee \l_tmpb_str { \c_backslash_str \c_hash_str } \c_hash_str
%    \end{macrocode}
% 
%    \begin{macrocode}
    \lua_now:e
      { 
        piton.ComputeRange
          ( '\l_tmpa_str' , '\l_tmpb_str' , '\l_@@_file_name_str' ) 
      } 
  }
%    \end{macrocode}
% 
% \bigskip
% \subsection{The styles}
% 
% \medskip
% The following command is fundamental: it will be used by the Lua code.
%    \begin{macrocode}
\NewDocumentCommand { \PitonStyle } { m } 
  { 
    \cs_if_exist_use:cF { pitonStyle _ \l_piton_language_str  _ #1 }
      { \use:c { pitonStyle _ #1 } }
  }
%    \end{macrocode}
%
% \medskip
% The following variant will be rarely used. It applies only a local style
% and only when that style exists (no error will be raised when the style does not
% exist). That command will be used in particular for the language ``|expl|''.
%    \begin{macrocode}
\NewDocumentCommand { \OptionalLocalPitonStyle } { m } 
  { \cs_if_exist_use:c { pitonStyle _ \l_piton_language_str  _ #1 } }
%    \end{macrocode}
%
% \medskip
%    \begin{macrocode}
\NewDocumentCommand { \SetPitonStyle } { O { } m } 
  { 
    \str_clear_new:N \l_@@_SetPitonStyle_option_str
    \str_set:Ne \l_@@_SetPitonStyle_option_str { \str_lowercase:n { #1 } }
    \str_if_eq:onT { \l_@@_SetPitonStyle_option_str } { current-language }
      { \str_set_eq:NN \l_@@_SetPitonStyle_option_str \l_piton_language_str }
    \keys_set:nn { piton / Styles } { #2 } 
  } 
%    \end{macrocode}
%
% 
% \medskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_math_scantokens:n #1 
  { \normalfont \scantextokens { \begin{math} #1 \end{math} } }
%    \end{macrocode}
% 
% \medskip
%    \begin{macrocode}
\clist_new:N \g_@@_styles_clist
\clist_gset:Nn \g_@@_styles_clist 
  {
    Comment ,
    Comment.Internal , 
    Comment.LaTeX ,
    Discard ,
    Exception ,
    FormattingType ,    
    Identifier.Internal ,
    Identifier ,
    InitialValues ,
    Interpol.Inside ,
    Keyword ,
    Keyword.Governing ,
    Keyword.Constant ,
    Keyword2 ,
    Keyword3 ,
    Keyword4 ,
    Keyword5 ,
    Keyword6 ,
    Keyword7 ,
    Keyword8 ,
    Keyword9 ,
    Name.Builtin ,      
    Name.Class ,
    Name.Constructor ,
    Name.Decorator ,
    Name.Field ,
    Name.Function ,
    Name.Module ,
    Name.Namespace ,
    Name.Table , 
    Name.Type ,
    Number ,
    Number.Internal ,
    Operator ,
    Operator.Word ,
    Preproc ,
    Prompt ,
    String.Doc ,
    String.Doc.Internal ,
    String.Interpol ,
    String.Long ,
    String.Long.Internal ,
    String.Short ,    
    String.Short.Internal ,    
    Tag ,  
    TypeParameter ,    
    UserFunction ,
%    \end{macrocode}
% |TypeExpression| is an internal style for expressions which defines types in OCaml.
%    \begin{macrocode}
    TypeExpression ,
%    \end{macrocode}
% Now, specific styles for the languages created with |\NewPitonLanguage| with
% the syntax of \pkg{listings}.
%    \begin{macrocode}
    Directive 
  }
%    \end{macrocode}
%
%
% 
%    \begin{macrocode}
\clist_map_inline:Nn \g_@@_styles_clist  
  {
    \keys_define:nn { piton / Styles }
      {
        #1 .value_required:n = true ,
        #1 .code:n = 
          \tl_set:cn 
            {
              pitonStyle _
              \str_if_empty:NF \l_@@_SetPitonStyle_option_str 
                { \l_@@_SetPitonStyle_option_str _ }
              #1
            }
            { ##1 }
      }
  }

\keys_define:nn { piton / Styles }
  {
    String       .meta:n = { String.Long = #1 , String.Short = #1 } ,
    String       .value_required:n = true ,    
    Comment.Math .tl_set:c = pitonStyle _ Comment.Math  ,
    Comment.Math .value_required:n = true ,
    unknown      .code:n = \@@_unknown_style:
  }
%    \end{macrocode}
%
% \bigskip
% For the langage |expl|, it's possible to create ``on the fly'' some styles
% of the form \texttt{Module.\textsl{name}} or \texttt{Type.\textsl{name}}.
% For the other languages, it's not possible. 
%    \begin{macrocode}
\cs_new_protected:Npn \@@_unknown_style:
  {
    \str_if_eq:eeTF \l_@@_SetPitonStyle_option_str { expl } 
      {
        \seq_set_split:Nne \l_tmpa_seq { . } \l_keys_key_str
        \seq_get_left:NN \l_tmpa_seq \l_tmpa_str
%    \end{macrocode}
% Now, the first part of the key (before the first period) is stored in |\l_tmpa_str|.
%    \begin{macrocode}
        \bool_lazy_and:nnTF
          { \int_compare_p:nNn { \seq_count:N \l_tmpa_seq } > { 1 } }
          {  
            \str_if_eq_p:Vn \l_tmpa_str { Module }
            ||
            \str_if_eq_p:Vn \l_tmpa_str { Type }
          }
%    \end{macrocode}
% Now, we will create a new style.
%    \begin{macrocode}
          { \tl_set:co { pitonStyle _ expl _ \l_keys_key_str } \l_keys_value_tl }
          { \@@_error:n { Unknown~key~for~SetPitonStyle } } 
      }
      { \@@_error:n { Unknown~key~for~SetPitonStyle } }
  }
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
\SetPitonStyle[OCaml]
  {
    TypeExpression = 
      { 
        \SetPitonStyle [ OCaml ]
          {
            Identifier = \PitonStyle { Name.Type } ,
            Name.Builtin = \PitonStyle { Name.Type}             
          } 
        \@@_piton:n  
      }
  }
%    \end{macrocode}
% 
% \bigskip
% We add the word |String| to the list of the styles because we will use that
% list in the error message for an unknown key in |\SetPitonStyle|.
%
%    \begin{macrocode}
\clist_gput_left:Nn \g_@@_styles_clist { String }
%    \end{macrocode}
%
% \bigskip
% Of course, we sort that clist.
%    \begin{macrocode}
\clist_gsort:Nn \g_@@_styles_clist
  { 
    \str_compare:nNnTF { #1 } < { #2 } 
      \sort_return_same:    
      \sort_return_swapped:  
  } 
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
\cs_set_eq:NN \@@_break_strings_anywhere:n \prg_do_nothing:

\cs_set_eq:NN \@@_break_numbers_anywhere:n \prg_do_nothing:

\cs_new_protected:Npn \@@_actually_break_anywhere:n #1
  {
    \tl_set:Nn \l_tmpa_tl { #1 }
%    \end{macrocode}
% We have to begin by a substitution for the spaces. Otherwise, they would be
% gobbled in the |\tl_map_inline:Nn|.
%    \begin{macrocode}
    \tl_replace_all:NVn \l_tmpa_tl \c_catcode_other_space_tl \space 
    \seq_clear:N \l_tmpa_seq 
    \tl_map_inline:Nn \l_tmpa_tl { \seq_put_right:Nn \l_tmpa_seq { ##1 } } 
    \seq_use:Nn \l_tmpa_seq { \- }
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_comment:n #1
  {
    \PitonStyle { Comment }
      {
        \bool_if:NTF \l_@@_break_lines_in_Piton_bool
          {
            \tl_set:Nn \l_tmpa_tl { #1 }
            \tl_replace_all:NVn \l_tmpa_tl 
              \c_catcode_other_space_tl 
              \@@_breakable_space:
            \l_tmpa_tl
          }
          { #1 }
      }
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_string_long:n #1
  {
    \PitonStyle { String.Long } 
      { 
        \bool_if:NTF \l_@@_break_strings_anywhere_bool
          { \@@_actually_break_anywhere:n { #1 } }
          { 
%    \end{macrocode}
% We have, when |break-lines-in-Piton| is in force, to replace the spaces by
% |\@@_breakable_space:| because, when we have done a similar job in
% |\@@_replace_spaces:n| used in |\@@_begin_line:|, that job was not able to do
% the replacement in the brace group |{...}| of |\PitonStyle{String.Long}{...}|
% because we used a |\tl_replace_all:NVn|. At that time, it would have been
% possible to use a |\tl_regex_replace_all:Nnn| but it is notoriously slow.
%    \begin{macrocode}
            \bool_if:NTF \l_@@_break_lines_in_Piton_bool
              {
                \tl_set:Nn \l_tmpa_tl { #1 }
                \tl_replace_all:NVn \l_tmpa_tl 
                  \c_catcode_other_space_tl 
                  \@@_breakable_space:
                \l_tmpa_tl
              }
              { #1 }
          } 
      }
  }
\cs_new_protected:Npn \@@_string_short:n #1
  {
    \PitonStyle { String.Short } 
      { 
        \bool_if:NT \l_@@_break_strings_anywhere_bool
          { \@@_actually_break_anywhere:n }
        { #1 } 
      }
  }
\cs_new_protected:Npn \@@_string_doc:n #1
  {
    \PitonStyle { String.Doc } 
      { 
        \bool_if:NTF \l_@@_break_lines_in_Piton_bool
          {
            \tl_set:Nn \l_tmpa_tl { #1 }
            \tl_replace_all:NVn \l_tmpa_tl 
              \c_catcode_other_space_tl 
              \@@_breakable_space:
            \l_tmpa_tl
          }
          { #1 }
      }
  }
\cs_new_protected:Npn \@@_number:n #1 
  {
    \PitonStyle { Number } 
      { 
        \bool_if:NT \l_@@_break_numbers_anywhere_bool
          { \@@_actually_break_anywhere:n }
        { #1 } 
      }
  }
%    \end{macrocode}
% 
% \bigskip
% \subsection{The initial styles}
%
% The initial styles are inspired by the style ``manni'' of Pygments.
% 
% \medskip
%    \begin{macrocode}
\SetPitonStyle
  {                                                       
    Comment               = \color [ HTML ] { 0099FF } \itshape , 
    Comment.Internal      = \@@_comment:n , 
    Exception             = \color [ HTML ] { CC0000 } ,
    Keyword               = \color [ HTML ] { 006699 } \bfseries , 
    Keyword.Governing     = \color [ HTML ] { 006699 } \bfseries , 
    Keyword.Constant      = \color [ HTML ] { 006699 } \bfseries ,               
    Name.Builtin          = \color [ HTML ] { 336666 } ,
    Name.Decorator        = \color [ HTML ] { 9999FF }, 
    Name.Class            = \color [ HTML ] { 00AA88 } \bfseries ,
    Name.Function         = \color [ HTML ] { CC00FF } , 
    Name.Namespace        = \color [ HTML ] { 00CCFF } , 
    Name.Constructor      = \color [ HTML ] { 006000 } \bfseries , 
    Name.Field            = \color [ HTML ] { AA6600 } , 
    Name.Module           = \color [ HTML ] { 0060A0 } \bfseries ,
    Name.Table            = \color [ HTML ] { 309030 } ,
    Number                = \color [ HTML ] { FF6600 } ,
    Number.Internal       = \@@_number:n ,
    Operator              = \color [ HTML ] { 555555 } ,
    Operator.Word         = \bfseries ,
    String                = \color [ HTML ] { CC3300 } ,
    String.Long.Internal  = \@@_string_long:n , 
    String.Short.Internal = \@@_string_short:n , 
    String.Doc.Internal   = \@@_string_doc:n , 
    String.Doc            = \color [ HTML ] { CC3300 } \itshape , 
    String.Interpol       = \color [ HTML ] { AA0000 } ,
    Comment.LaTeX         = \normalfont \color [ rgb ] { .468, .532, .6 } , 
    Name.Type             = \color [ HTML ] { 336666 } ,
    InitialValues         = \@@_piton:n ,
    Interpol.Inside       = { \l_@@_font_command_tl \@@_piton:n } ,
    TypeParameter         = \color [ HTML ] { 336666} \itshape ,
    Preproc               = \color [ HTML ] { AA6600} \slshape ,
%    \end{macrocode}
% We need the command |\@@_identifier:n| because of the command
% |\SetPitonIdentifier|. The command |\@@_identifier:n| will potentially call
% the style |Identifier| (which is a user-style, not an internal style).
%    \begin{macrocode}
    Identifier.Internal   = \@@_identifier:n , 
    Identifier            = ,
    Directive             = \color [ HTML ] { AA6600} ,
    Tag                   = \colorbox { gray!10 } , 
    UserFunction          = \PitonStyle { Identifier } ,
    Prompt                = , 
    Discard               = \use_none:n 
  }
%    \end{macrocode}
% \bigskip
% \subsection{Styles specific to the language expl}
%
%    \begin{macrocode}
\clist_new:N \g_@@_expl_styles_clist
\clist_gset:Nn \g_@@_expl_styles_clist
  {
    Scope.l ,
    Scope.g ,
    Scope.c 
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\clist_map_inline:Nn \g_@@_expl_styles_clist  
  {
    \keys_define:nn { piton / Styles }
      {
        #1 .value_required:n = true ,
        #1 .code:n = 
          \tl_set:cn 
            {
              pitonStyle _
              \str_if_empty:NF \l_@@_SetPitonStyle_option_str 
                { \l_@@_SetPitonStyle_option_str _ }
              #1
            }
            { ##1 }
      }
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\SetPitonStyle [ expl ]
  {
    Scope.l          = ,
    Scope.g          = \bfseries ,
    Scope.c          = \slshape ,
    Type.bool        = \color [ HTML ] { AA6600} ,
    Type.box         = \color [ HTML ] { 267910 } ,
    Type.clist       = \color [ HTML ] { 309030 } ,
    Type.fp          = \color [ HTML ] { FF3300 } ,
    Type.int         = \color [ HTML ] { FF6600 } ,
    Type.seq         = \color [ HTML ] { 309030 } ,
    Type.skip        = \color [ HTML ] { 0CC060 } ,
    Type.str         = \color [ HTML ] { CC3300 } ,
    Type.tl          = \color [ HTML ] { AA2200 } ,
    Module.bool      = \color [ HTML ] { AA6600} ,
    Module.box       = \color [ HTML ] { 267910 } ,
    Module.cs        = \bfseries \color [ HTML ] { 006699 } ,
    Module.exp       = \bfseries \color [ HTML ] { 404040 } ,
    Module.hbox      = \color [ HTML ] { 267910 } ,
    Module.prg       = \bfseries ,
    Module.clist     = \color [ HTML ] { 309030 } ,
    Module.fp        = \color [ HTML ] { FF3300 } ,
    Module.int       = \color [ HTML ] { FF6600 } ,
    Module.seq       = \color [ HTML ] { 309030 } ,
    Module.skip      = \color [ HTML ] { 0CC060 } ,
    Module.str       = \color [ HTML ] { CC3300 } ,
    Module.tl        = \color [ HTML ] { AA2200 } ,
    Module.vbox      = \color [ HTML ] { 267910 }     
  }
%    \end{macrocode}
% 
% \medskip 
% If the key |math-comments| has been used in the preamble of the LaTeX
% document, we change the style |Comment.Math| which should be considered only
% at an ``internal style''. However, maybe we will document in a future version
% the possibility to write change the style \emph{locally} in a document)].
%    \begin{macrocode}
\hook_gput_code:nnn { begindocument } { . } 
  { 
    \bool_if:NT \g_@@_math_comments_bool 
      { \SetPitonStyle { Comment.Math = \@@_math_scantokens:n } } 
  }
%    \end{macrocode}
% 
% 
% \bigskip
% \subsection{Highlighting some identifiers}
%
%
% \medskip
%    \begin{macrocode}
\NewDocumentCommand { \SetPitonIdentifier } { o m m } 
  { 
    \clist_set:Nn \l_tmpa_clist { #2 }
    \tl_if_novalue:nTF { #1 }
      { 
        \clist_map_inline:Nn \l_tmpa_clist 
          { \cs_set:cpn { PitonIdentifier _ ##1 } { #3 } }
      }
      {
        \str_set:Ne \l_tmpa_str { \str_lowercase:n { #1 } }
        \str_if_eq:onT \l_tmpa_str { current-language }
          { \str_set_eq:NN \l_tmpa_str \l_piton_language_str }
        \clist_map_inline:Nn \l_tmpa_clist 
          { \cs_set:cpn { PitonIdentifier _ \l_tmpa_str _ ##1 } { #3 } }
      }
  } 
%    \end{macrocode}
% 
%    \begin{macrocode}
\cs_new_protected:Npn \@@_identifier:n #1
  {
    \str_set:Nn \l_tmpa_str { #1 }
    \cs_if_exist_use:cF { PitonIdentifier _ \l_piton_language_str _ \l_tmpa_str } 
      { 
        \cs_if_exist_use:cF { PitonIdentifier _ \l_tmpa_str } 
          { \PitonStyle { Identifier } } 
      }
    { #1 } 
  } 
%    \end{macrocode}
%
%
% \bigskip
% In particular, we have an highlighting of the identifiers which are the
% names of Python functions previously defined by the user. Indeed, when a
% Python function is defined, the style |Name.Function.Internal| is applied to
% that name. We define now that style (we define it directly and we short-cut
% the function |\SetPitonStyle|). 
%    \begin{macrocode}
\cs_new_protected:cpn { pitonStyle _ Name.Function.Internal } #1
  { 
%    \end{macrocode}
% First, the element is composed in the TeX flow with the style |Name.Function|
% which is provided to the end user.
%    \begin{macrocode}
    { \PitonStyle { Name.Function } { #1 } }
      \str_set:Nn \l_tmpa_str { #1 } 
%    \end{macrocode}
% Now, we specify that the name of the new Python function is a known identifier
% that will be formatted with the Piton style |UserFunction|. Of course,
% here the affectation is global because we have to exit many groups and even
% the environments |{Piton}|).
%    \begin{macrocode}
    \cs_gset_protected:cpn { PitonIdentifier _ \l_piton_language_str _ \l_tmpa_str } 
      { \PitonStyle { UserFunction } }
%    \end{macrocode}
% Now, we put the name of that new user function in the dedicated sequence
% (specific of the current language). {\bfseries That sequence will be used only
% by |\PitonClearUserFunctions|}.
%    \begin{macrocode}
    \seq_if_exist:cF { g_@@_functions _ \l_piton_language_str _ seq }
      { \seq_new:c { g_@@_functions _ \l_piton_language_str _ seq } }
    \seq_gput_right:co { g_@@_functions _ \l_piton_language_str _ seq } \l_tmpa_str
%    \end{macrocode}
% We update |\g_@@_languages_seq| which is used only by the command
% |\PitonClearUserFunctions| when it's used without its optional argument.
%    \begin{macrocode}
    \seq_if_in:NoF \g_@@_languages_seq { \l_piton_language_str }
      { \seq_gput_left:No \g_@@_languages_seq { \l_piton_language_str } }
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\NewDocumentCommand \PitonClearUserFunctions { ! o } 
  { 
    \tl_if_novalue:nTF { #1 }
%    \end{macrocode}
% If the command is used without its optional argument, we will deleted the
% user language for all the computer languages.
%    \begin{macrocode}
      { \@@_clear_all_functions: }
      { \@@_clear_list_functions:n { #1 } }
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_clear_list_functions:n #1
  {
    \clist_set:Nn \l_tmpa_clist { #1 }
    \clist_map_function:NN \l_tmpa_clist \@@_clear_functions_i:n 
    \clist_map_inline:nn { #1 }
      { \seq_gremove_all:Nn \g_@@_languages_seq { ##1 } }
  }
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_clear_functions_i:n #1
  { \@@_clear_functions_ii:n { \str_lowercase:n { #1 } } }
%    \end{macrocode}
% 
% The following command clears the list of the user-defined functions for the
% language provided in argument (mandatory in lower case). 
%    \begin{macrocode}
\cs_new_protected:Npn \@@_clear_functions_ii:n #1 
  {
    \seq_if_exist:cT { g_@@_functions _ #1 _ seq }
      {
        \seq_map_inline:cn { g_@@_functions _ #1 _ seq }
          { \cs_undefine:c { PitonIdentifier _ #1 _ ##1} }
        \seq_gclear:c { g_@@_functions _ #1 _ seq }
      }
  }
\cs_generate_variant:Nn \@@_clear_functions_ii:n { e }
%    \end{macrocode}
%  
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_clear_functions:n #1 
  {
    \@@_clear_functions_i:n { #1 }
    \seq_gremove_all:Nn \g_@@_languages_seq { #1 }
  }
%    \end{macrocode}
% 
% \bigskip
% The following command clears all the user-defined functions for all the
% computer languages.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_clear_all_functions:
  { 
    \seq_map_function:NN \g_@@_languages_seq \@@_clear_functions_i:n 
    \seq_gclear:N \g_@@_languages_seq
  }
%    \end{macrocode}
%
%
% \bigskip
%    \begin{macrocode}
\AtEndDocument
  {
%    \end{macrocode}
% For the files written on the disk (with the key |write|), all the job is done by
% Lua.
%    \begin{macrocode}
    \lua_now:n { piton.write_files_now ( ) }
%    \end{macrocode}
% For the files joined in the \textsc{pdf}, we have a modern version which uses
% the package \pkg{pdfmanagement} of LaTeX and a legacy mechanism.
%    \begin{macrocode}
    \IfPDFManagementActiveTF
      { \@@_join_files: }
      { \@@_join_files_legacy: }
  }
%    \end{macrocode}
%
%
% \bigskip
% If the new pakcage \pkg{pdfmanagement} is used, we insert the file directly in the
% catalog of the \textsc{pdf} file.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_join_files:
  {
    \seq_map_inline:Nn \g_@@_join_seq
      {
        \lua_now:n { pdf.immediateobj ( "stream" , piton.join_files["##1"] ) }
        \str_set_convert:Nnnn \l_tmpa_str { ##1 } { } { utf16/hex }
        \pdfmanagement_add:nne { Catalog / Names } { EmbeddedFiles }
          {
            <<
               /Type /Filespec 
               /UF <\l_tmpa_str>
               /EF << /F~\pdf_object_ref_last: >>
               /Desc (Computer~listing)
               /AFRelationship /Supplement
            >>
          }
      }
  }
%    \end{macrocode}
%
% 
% \bigskip
% The legacy version of |\@@_join_files:| will be used when the new
% package \pkg{pdfmanagement} is \emph{not} used. It that case, we can't
% insert the file directly in the catalog of the \text{pdf} file. Therefore, we
% insert the file linked to a annotation in a page of the \textsc{pdf} file. We
% try to make the annotation itself invisible with several technics.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_join_files_legacy:
  {
    \seq_map_inline:Nn \g_@@_join_seq
      {
        \str_set_convert:Nnnn \l_tmpa_str { ##1 } { } { utf16/hex }
        \lua_now:n { pdf.immediateobj ( "stream" , piton.join_files["##1"] ) }
        \pdfextension annot~width~0pt~height~0pt~depth~0pt
%    \end{macrocode}
% The entry |/F| in the \textsc{pdf} dictionnary of the annotation is an
% unsigned 32-bit integer containing flags specifying various characteristics of
% the annotation. The bit in position 2 means \emph{Hidden}.
% However, despite that bit which means \emph{Hidden}, some \textsc{pdf} readers
% show the annotation. That's why we have used |width 0pt height 0pt depth 0pt|.
%    \begin{macrocode}
          {
            /Subtype /FileAttachment
            /F~2
            /Name /Paperclip
            /Contents (Computer~listing)
            /FS <<
                    /Type /Filespec
%    \end{macrocode}
% We have previously converted the name of the embedded file in |utf16/hex| with
% the \textsc{bom} of big endian and now we can write a \textsc{pdf} string
% between |<| and |>| (with that encoding).
%    \begin{macrocode}
                    /UF <\l_tmpa_str>
%    \end{macrocode}                    
% It would have been possible to write |\pdffeedback lastobj~0~R| instead
% |\pdf_object_ref_last:| since LuaTeX is the only engine allowed by \pkg{piton}. Remark
% that |\pdf_object_ref_last:| is in the LaTeX kernel (not in the package |pdfmanagement|).
%    \begin{macrocode}
                    /EF << /F~\pdf_object_ref_last: >> 
                    /AFRelationship /Supplement
                >>
           } 
      }
  }
%    \end{macrocode}
% 
%
% \bigskip
%
% \subsection{Spaces of indentation}
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_define_leading_space_normal:
  {
    \cs_set_protected:Npn \@@_leading_space:
      {
        \int_gincr:N \g_@@_indentation_int
%    \end{macrocode}
% Be careful: the |\hbox:n| is mandatory. 
%    \begin{macrocode}
        \hbox:n { ~ }
      }
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\cs_new_protected:Npn \@@_define_leading_space_Foxit:
  {
    \cs_set_protected:Npn \@@_leading_space: 
      {
        \int_gincr:N \g_@@_indentation_int
        \pdfextension literal { /Artifact << /ActualText (\space) >> BDC }
          {
            \color { white }
            \transparent { 0 }
            . % previously : ␣ U+2423 
          }
        \pdfextension literal { EMC } 
      }
  }
\@@_define_leading_space_Foxit:  
%    \end{macrocode}
%
% 
% \bigskip
% \subsection{Security}
%
%     \begin{macrocode}
\AddToHook { env / piton / before } 
  { \@@_fatal:n { No~environment~piton } }
%    \end{macrocode}
%
% 
% \bigskip
% \subsection{The error messages of the package}
%
%
% When there is a unknown key, we try a ``normal form'' of the key and, when
% that normal form exists, we add that information in the error message.
%
% The normal form is the lower case form of the key, with all the spaces
% replaced by hyphens (there is never spaces in the keys of \pkg{piton}).
% 
% |#1| is a clist of names of sets of keys and |#2| is the error message
% to send.
%    \begin{macrocode}
\cs_new_protected:Npn \@@_unknown_key:nn #1 #2
  {
    \str_set_eq:NN \l_tmpa_str \l_keys_key_str 
    \str_replace_all:Nnn \l_tmpa_str { ~ } { - }
    \str_set:Ne \l_tmpa_str { \str_lowercase:f { \l_tmpa_str } }
    \bool_set_false:N \l_tmpa_bool 
    \clist_map_inline:nn { #1 }
      {
        \keys_if_exist:neT { ##1 } { \l_tmpa_str } 
          {
            \@@_error:n { key~with~normal~form~exists }
            \bool_set_true:N \l_tmpa_bool
            \clist_map_break:
          }
      }
    \bool_if:NF \l_tmpa_bool { \@@_error:n { #2 } } 
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { key~with~normal~form~exists }
  {
    The~key~'\l_keys_key_str'~does~not~exists.~It~will~be~ignored.\\
    Maybe~you~want~to~use~the~key~'\l_tmpa_str'.
  }
%    \end{macrocode}
%
%
%    \begin{macrocode}
\@@_msg_new:nn { No~environment~piton }
  { 
    There~is~no~environment~piton!\\
    There~is~an~environment~{Piton}~and~a~command~
    \token_to_str:N \piton\ but~there~is~no~environment~
    {piton}.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { rounded-corners~without~Tikz }
  {
    TikZ~not~used \\
    You~can't~use~the~key~'rounded-corners'~because~
    you~have~not~loaded~the~package~TikZ.~
    If~you~go~on,~your~key~will~be~ignored.~
    You~won't~have~similar~error~till~the~end~of~the~document.
  }
%    \end{macrocode}
% 
%    \begin{macrocode}
\@@_msg_new:nn { tcolorbox~not~loaded }
  {
    tcolorbox~not~loaded \\
    You~can't~use~the~key~'tcolorbox'~because~
    you~have~not~loaded~the~package~tcolorbox.~
    Use~\token_to_str:N \usepackage[breakable]{tcolorbox}.~
    If~you~go~on,~that~key~will~be~ignored.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { library~breakable~not~loaded }
  {
    breakable~not~loaded \\
    You~can't~use~the~key~'tcolorbox'~because~
    you~have~not~loaded~the~library~'breakable'~of~tcolorbox'.~
    Use~\token_to_str:N \tcbuselibrary{breakable}~in~the~preamble~
    of~your~document.~
    If~you~go~on,~that~key~will~be~ignored.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { Language~not~defined }
  { 
    Language~not~defined \\
    The~language~'\l_tmpa_tl'~has~not~been~defined~previously.~
    If~you~go~on,~your~command~\token_to_str:N \NewPitonLanguage\ 
    will~be~ignored.
  }
%    \end{macrocode}
%
% 
%    \begin{macrocode}
\@@_msg_new:nn { bad~version~of~piton.lua }
  {
    Bad~number~version~of~'piton.lua'\\
    The~file~'piton.lua'~loaded~has~not~the~same~number~of~
    version~as~the~file~'piton.sty'.~You~can~go~on~but~you~should~
    address~that~issue.
  }
%    \end{macrocode}
%
%
%    \begin{macrocode}
\@@_msg_new:nn { Unknown~key~NewPitonLanguage } 
  {
    Unknown~key~for~\token_to_str:N \NewPitonLanguage.\\
    The~key~'\l_keys_key_str'~is~unknown.~
    This~key~will~be~ignored.
  }
%    \end{macrocode}
% 
%    \begin{macrocode}
\@@_msg_new:nn { Unknown~key~for~SetPitonStyle } 
  {
    The~style~'\l_keys_key_str'~is~unknown.\\
    This~setting~will~be~ignored.~
    The~available~styles~are~(in~alphabetic~order):~
    \clist_use:Nnnn \g_@@_styles_clist { ~and~ } { ,~ } { ~and~ }.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { Invalid~key }
  {
    Wrong~use~of~key.\\
    You~can't~use~the~key~'\l_keys_key_str'~here.~
    Your~key~will~be~ignored.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { Unknown~key~for~line-numbers } 
  { 
    Unknown~key. \\
    The~key~'line-numbers / \l_keys_key_str'~is~unknown.~
    The~available~keys~of~the~family~'line-numbers'~are~(in~
    alphabetic~order):~
    absolute,~false,~label-empty-lines,~position,~resume,~skip-empty-lines,~
    sep,~start~and~true.~
    Your~key~will~be~ignored.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { Unknown~key~for~marker } 
  { 
    Unknown~key. \\
    The~key~'marker / \l_keys_key_str'~is~unknown.~
    The~available~keys~of~the~family~'marker'~are~(in~
    alphabetic~order):~ beginning,~end~and~include-lines.~
    Your~key~will~be~ignored.
  }
%    \end{macrocode}
% 
%    \begin{macrocode}
\@@_msg_new:nn { bad~range~specification } 
  {
    Incompatible~keys.\\
    You~can't~specify~the~range~of~lines~to~include~by~using~both~
    markers~and~explicit~number~of~lines.~
    Your~whole~file~'\l_@@_file_name_str'~will~be~included.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\cs_new_nopar:Nn \@@_thepage:
  {
    \thepage
    \cs_if_exist:NT \insertframenumber
      {
        ~(frame~\insertframenumber
        \cs_if_exist:NT \beamer@slidenumber { ,~slide~\insertslidenumber }
        )
      } 
  }
%    \end{macrocode}
% 
% We don't give the name |syntax error| for the following error because you
% should not give a name with a space because such space could be replaced by
% U+2423 when the key |show-spaces| is in force in the command |\piton|.
%   \begin{macrocode}
\@@_msg_new:nn { SyntaxError }
  {
    Syntax~Error~on~page~\@@_thepage:.\\
    Your~code~of~the~language~'\l_piton_language_str'~is~not~
    syntactically~correct.~
    It~won't~be~printed~in~the~PDF~file.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { FileError }
  {
    File~Error.\\
    It's~not~possible~to~write~on~the~file~'#1' \\
    \sys_if_shell_unrestricted:F 
      { (try~to~compile~with~'lualatex~-shell-escape').\\ } 
    If~you~go~on,~nothing~will~be~written~on~that~file.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { InexistentDirectory }
  {
    Inexistent~directory.\\
    The~directory~'\l_@@_path_write_str'~
    given~in~the~key~'path-write'~does~not~exist.~
    Nothing~will~be~written~on~'\l_@@_write_str'.
  }
%    \end{macrocode}
% 
%    \begin{macrocode}
\@@_msg_new:nn { begin~marker~not~found }
  {
    Marker~not~found.\\
    The~range~'\l_@@_begin_range_str'~provided~to~the~  
    command~\token_to_str:N \PitonInputFile\ has~not~been~found.~
    The~whole~file~'\l_@@_file_name_str'~will~be~inserted.
  }
%    \end{macrocode}
%
% 
%    \begin{macrocode}
\@@_msg_new:nn { end~marker~not~found }
  {
    Marker~not~found.\\
    The~marker~of~end~of~the~range~'\l_@@_end_range_str'~
    provided~to~the~command~\token_to_str:N \PitonInputFile\ 
    has~not~been~found.~The~file~'\l_@@_file_name_str'~will~
    be~inserted~till~the~end.
  }
%    \end{macrocode}
% 
% 
%    \begin{macrocode}
\@@_msg_new:nn { Unknown~file }
  {
    Unknown~file. \\
    The~file~'#1'~is~unknown.~
    Your~command~\token_to_str:N \PitonInputFile\ will~be~ignored.
  }
%    \end{macrocode}
%
%    \begin{macrocode} 
\cs_new_protected:Npn \@@_error_if_not_in_beamer:
  { 
    \bool_if:NF \g_@@_beamer_bool
      { \@@_error_or_warning:n { Without~beamer } }
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { Without~beamer }
  {
    Key~'\l_keys_key_str'~without~Beamer.\\
    You~should~not~use~the~key~'\l_keys_key_str'~since~you~
    are~not~in~Beamer.~However,~you~can~go~on.
  }
%    \end{macrocode}
%
%    \begin{macrocode}
\@@_msg_new:nn { rowcolor~in~detected-commands }
  {
     'rowcolor'~forbidden~in~'detected-commands'.\\
     You~should~put~'rowcolor'~in~'raw-detected-commands'.~
     That~key~will~be~ignored.
  }
%    \end{macrocode}
% 
%    \begin{macrocode}
\@@_msg_new:nnn { Unknown~key~for~PitonOptions }
  { 
    Unknown~key. \\
    The~key~'\l_keys_key_str'~is~unknown~for~\token_to_str:N \PitonOptions.~
    It~will~be~ignored.~
    For~a~list~of~the~available~keys,~type~H~<return>.
  }
  {
    The~available~keys~are~(in~alphabetic~order):~
    annotation,~
    add-to-split-separation,~
    auto-gobble,~
    background-color,~
    begin-range,~
    box,~
    break-lines,~
    break-lines-in-piton,~
    break-lines-in-Piton,~
    break-numbers-anywhere,~
    break-strings-anywhere,~
    continuation-symbol,~ 
    continuation-symbol-on-indentation,~
    detected-beamer-commands,~
    detected-beamer-environments,~
    detected-commands,~
    end-of-broken-line,~
    end-range,~
    env-gobble,~
    env-used-by-split,~
    font-command(+),~
    gobble,~
    indent-broken-lines,~
    join,~
    label-as-zlabel,~
    language,~
    left-margin,~
    line-numbers/,~
    marker/,~
    math-comments,~
    no-join,~
    no-write,~
    path,~
    path-write,~
    print,~
    prompt-background-color,~
    raw-detected-commands,~
    resume,~
    right-margin,~
    rounded-corners,~
    show-spaces,~
    show-spaces-in-strings,~
    splittable,~
    splittable-on-empty-lines,~
    split-on-empty-lines,~
    split-separation,~
    tabs-auto-gobble,~
    tab-size,~
    tcolorbox,~
    varwidth,~
    vertical-detected-commands,~
    width~and~write.
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\@@_msg_new:nn { label~with~lines~numbers } 
  {
    You~can't~use~the~command~\token_to_str:N \label\
    or~\token_to_str:N \zlabel\ because~the~key~'line-numbers'
    ~is~not~active.~If~you~go~on,~that~command~will~ignored.
  }
%    \end{macrocode}
% 
%
% \bigskip
%    \begin{macrocode}
\@@_msg_new:nn { overlay~without~beamer }
  {
    You~can't~use~an~argument~<...>~for~your~command~
    \token_to_str:N \PitonInputFile\ because~you~are~not~
    in~Beamer.~If~you~go~on,~that~argument~will~be~ignored.
  }
%    \end{macrocode}
%    
% \bigskip
%
%    \begin{macrocode}
\@@_msg_new:nn { label~as~zlabel~needs~zref~package }
  {
    The~key~'label-as-zlabel'~requires~the~package~'zref'.~
    Please~load~the~package~'zref'~before~setting~the~key.
  }
\hook_gput_code:nnn { begindocument } { . }
  {
    \bool_if:NT \g_@@_label_as_zlabel_bool
      {
        \IfPackageLoadedF { zref-base }
          { \@@_fatal:n { label~as~zlabel~needs~zref~package } }
      }
  }
%    \end{macrocode}
% 
% \bigskip
% \subsection{We load piton.lua}
%
%
% \bigskip
%    \begin{macrocode}
\cs_new_protected:Npn \@@_test_version:n #1
  { 
    \str_if_eq:onF \PitonFileVersion { #1 } 
      { \@@_error:n { bad~version~of~piton.lua } }
  }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
\hook_gput_code:nnn { begindocument } { . }
  { 
    \lua_load_module:n { piton }
    \lua_now:n 
      { 
        tex.sprint ( luatexbase.catcodetables.expl ,
                     [[\@@_test_version:n {]] .. piton_version ..  "}" ) 
      }
  }
%    \end{macrocode}
% 
%   
%</STY>
% 
% 
% \bigskip
% \section{The Lua part of the implementation}
%
% \bigskip
% The Lua code will be loaded via a |{luacode*}| environment. The environment
% is by itself a Lua block and the local declarations will be local to that
% block. All the global functions (used by the L3 parts of the implementation)
% will be put in a Lua table called |piton|.
%
% 
%    \begin{macrocode}
%<*LUA>
piton.comment_latex = piton.comment_latex or ">" 
piton.comment_latex = "#" .. piton.comment_latex 
%    \end{macrocode}
%
% \bigskip
% The table |piton.write_files| will contain the contents of all the files that we
% will write on the disk in the |\AtEndDocument| (if the user has used the key
% |write-file|). The table |piton.join_files| is similar for the key |join|.
%    \begin{macrocode}
piton.write_files = { }
piton.join_files = { }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
local sprintL3
function sprintL3 ( s ) 
  tex.sprint ( luatexbase.catcodetables.expl , s ) 
end 
%    \end{macrocode}
% 
% \bigskip
% \subsection{Special functions dealing with LPEG}
%
% \medskip
% We will use the Lua library \pkg{lpeg} which is built in LuaTeX. That's why we
% define first aliases for several functions of that library.
%    \begin{macrocode}
local P, S, V, C, Ct, Cc = lpeg.P, lpeg.S, lpeg.V, lpeg.C, lpeg.Ct, lpeg.Cc
local Cg , Cmt , Cb = lpeg.Cg , lpeg.Cmt , lpeg.Cb 
local B , R = lpeg.B , lpeg.R
%    \end{macrocode}
%
% \vspace{1cm}
% The following line is mandatory.
%    \begin{macrocode}
lpeg.locale(lpeg)
%    \end{macrocode}
%
%
% \subsection{The functions Q, K, WithStyle, etc.}
%
% \bigskip
% The function |Q| takes in as argument a pattern and returns a \textsc{lpeg}
% \emph{which does a capture} of the pattern. That capture will be sent to LaTeX
% with the catcode ``other'' for all the characters: it's suitable for elements
% of the computer listings that \pkg{piton} will typeset verbatim (thanks to the
% catcode ``other''). 
%    \begin{macrocode}
local Q
function Q ( pattern )
  return Ct ( Cc ( luatexbase.catcodetables.other ) * C ( pattern ) )
end 
%    \end{macrocode}
%
%
% \bigskip
% The function |L| takes in as argument a pattern and returns a \textsc{lpeg}
% \emph{which does a capture} of the pattern. That capture will be sent to LaTeX
% with standard LaTeX catcodes for all the characters: the elements captured
% will be formatted as normal LaTeX codes. It's suitable for the ``LaTeX
% comments'' in the environments |{Piton}| and the elements between 
% |begin-escape| and |end-escape|. That function won't be much used.
%    \begin{macrocode}
local L
function L ( pattern ) return 
  Ct ( C ( pattern ) ) 
end
%    \end{macrocode}
%
% \bigskip
% The function |Lc| (the c is for \emph{constant}) takes in as argument a string
% and returns a \textsc{lpeg} \emph{with does a constant capture} which returns
% that string. The elements captured will be formatted as L3 code. It will be
% used to send to LaTeX all the formatting LaTeX instructions we have to insert
% in order to do the syntactic highlighting (that's the main job of
% \pkg{piton}). That function, unlike the previous one, will be widely used.
%    \begin{macrocode}
local Lc
function Lc ( string ) return 
  Cc ( { luatexbase.catcodetables.expl , string } ) 
end 
%    \end{macrocode}
% 
% \bigskip
% The function |K| creates a \textsc{lpeg} which will return as capture the
% whole LaTeX code corresponding to a Python chunk (that is to say with the
% LaTeX formatting instructions corresponding to the syntactic nature of that
% Python chunk). The first argument is a Lua string corresponding to the name of
% a \pkg{piton} style and the second element is a pattern (that is to say a
% \textsc{lpeg} without capture)
%    \begin{macrocode}
local K
function K ( style , pattern ) return
  Lc ( [[ {\PitonStyle{ ]] .. style .. "}{" )
  * Q ( pattern )
  * Lc "}}"
end
%    \end{macrocode}
% The formatting commands in a given \pkg{piton} style (eg. the style |Keyword|)
% may be semi-global declarations (such as |\bfseries| or |\slshape|) or LaTeX
% macros with an argument (such as |\fbox| or |\colorbox{yellow}|). In order to
% deal with both syntaxes, we have used two pairs of braces: 
% |{\PitonStyle{Keyword}{|\texttt{\slshape text to format}|}}|.
% 
%
% \bigskip
% The following function |WithStyle| is similar to the function |K| but should
% be used for multi-lines elements. 
%    \begin{macrocode}
local WithStyle
function WithStyle ( style , pattern ) return 
    Ct ( Cc "Open" * Cc ( [[{\PitonStyle{]] .. style .. "}{" ) * Cc "}}" ) 
  * pattern 
  * Ct ( Cc "Close" ) 
end
%    \end{macrocode}
% 
% \bigskip
% The following \textsc{lpeg} catches the Python chunks which are in LaTeX
% escapes (and that chunks will be considered as normal LaTeX constructions).
%    \begin{macrocode}
Escape = P ( false ) 
EscapeClean = P ( false ) 
if piton.begin_escape then 
  Escape = 
    P ( piton.begin_escape )
    * L ( ( 1 - P ( piton.end_escape ) ) ^ 1 ) 
    * P ( piton.end_escape )
%    \end{macrocode}
% The LPEG |EscapeClean| will be used in the LPEG Clean (and that LPEG is used
% to ``clean'' the code by removing the formatting elements).
%    \begin{macrocode}
  EscapeClean = 
    P ( piton.begin_escape )
    * ( 1 - P ( piton.end_escape ) ) ^ 1 
    * P ( piton.end_escape )
end
%    \end{macrocode}
% 
%    \begin{macrocode}
EscapeMath = P ( false ) 
if piton.begin_escape_math then 
  EscapeMath = 
    P ( piton.begin_escape_math )
    * Lc "$"
    * L ( ( 1 - P(piton.end_escape_math) ) ^ 1 )
    * Lc "$" 
    * P ( piton.end_escape_math )
end
%    \end{macrocode}
% 
%
% \bigskip
% \paragraph{The basic syntactic LPEG}
%
%    \begin{macrocode}
local alpha , digit = lpeg.alpha , lpeg.digit
local space = P " " 
%    \end{macrocode}
%
% Remember that, for \textsc{lpeg}, the Unicode characters such as |à|, |â|,
% |ç|, etc. are in fact strings of length 2 (2 bytes) because \pkg{lpeg} is not
% Unicode-aware. 
%    \begin{macrocode}
local letter = alpha + "_" + "â" + "à" + "ç" + "é" + "è" + "ê" + "ë" + "ï" + "î"
                    + "ô" + "û" + "ü" + "Â" + "À" + "Ç" + "É" + "È" + "Ê" + "Ë"
                    + "Ï" + "Î" + "Ô" + "Û" + "Ü"

local alphanum = letter + digit
%    \end{macrocode}
% 
% \bigskip
% The following \textsc{lpeg} |identifier| is a mere pattern (that is to say
% more or less a regular expression) which matches the Python identifiers (hence
% the name).
%    \begin{macrocode}
local identifier = letter * alphanum ^ 0
%    \end{macrocode}
% 
% \medskip
% On the other hand, the \textsc{lpeg} |Identifier| (with a capital) also returns
% a \emph{capture}.
%    \begin{macrocode}
local Identifier = K ( 'Identifier.Internal' , identifier )
%    \end{macrocode}
%
% \bigskip
% \textbf{By convention, we will use names with an initial capital for LPEG
% which return captures.}
%
% \bigskip
% 
% The following functions allow to recognize numbers that contains |_| among
% their digits, for example |1_000_000|, but also floating point numbers, numbers
% with exponents and numbers with different bases.\footnote{The edge cases such as }
%    \begin{macrocode}
local allow_underscores_except_first
function allow_underscores_except_first ( p )
    return p * (P "_" + p)^0
end
local allow_underscores
function allow_underscores ( p )
    return (P "_" + p)^0
end
local digits_to_number
function digits_to_number(prefix, digits)
    -- The edge cases of what is allowed in number litterals is modelled after
    -- OCaml numbers, which seems to be the most permissive language
    -- in this regard (among C, OCaml, Python & SQL).
    return prefix
        * allow_underscores_except_first(digits^1)
        * (P "." * #(1 - P ".") * allow_underscores(digits))^-1
        * (S "eE" * S "+-"^-1 * allow_underscores_except_first(digits^1))^-1
end
%    \end{macrocode}
% 
% \bigskip
% Here is the first use of our function~|K|. That function will be used to
% construct \textsc{lpeg} which capture Python chunks for which we have a
% dedicated \pkg{piton} style. For example, for the numbers, \pkg{piton}
% provides a style which is called |Number|. The name of the style is provided
% as a Lua string in the second argument of the function~|K|. By convention, we
% use single quotes for delimiting the Lua strings which are names of
% \pkg{piton} styles (but this is only a convention).
%    \begin{macrocode}
local Number =
  K ( 'Number.Internal' ,
      digits_to_number (P "0x" + P "0X", R "af" + R "AF" + digit)
      + digits_to_number (P "0o" + P "0O", R "07")
      + digits_to_number (P "0b" + P "0B", R "01")
      + digits_to_number ( "" , digit )
    )
%    \end{macrocode}
%
% \bigskip
% We will now define the LPEG |Word|.
%
% We have a problem in the following LPEG because, obviously, we should adjust
% the list of symbols with the delimiters of the current language (no?).
%    \begin{macrocode}
local lpeg_central = 1 - S " '\"\r[({})]" - digit
%    \end{macrocode}
% We recall that |piton.begin_escape| and |piton_end_escape| are Lua strings
% corresponding to the keys |begin-escape| and |end-escape|. 
%    \begin{macrocode}
if piton.begin_escape then 
  lpeg_central = lpeg_central - piton.begin_escape 
end
if piton.begin_escape_math then 
  lpeg_central = lpeg_central - piton.begin_escape_math 
end
local Word = Q ( lpeg_central ^ 1 ) 
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
local Space = Q " " ^ 1
local SkipSpace = Q " " ^ 0

local Punct = Q ( S ".,:;!" )

local Tab = "\t" * Lc [[ \@@_tab: ]]
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
local LeadingSpace = Lc [[ \@@_leading_space: ]] * P " "
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
local Delim = Q ( S "[({})]" )
%    \end{macrocode}
% 
% \bigskip 
% The following \textsc{lpeg} catches a space (U+0020) and replaces it by
% |\l_@@_space_in_string_tl|. It will be used in the strings. Usually,
% |\l_@@_space_in_string_tl| will contain a space and therefore there won't be any
% difference. However, when the key |show-spaces-in-strings| is in force,
% |\\l_@@_space_in_string_tl| will contain ␣ (U+2423) in order to visualize the
% spaces.
%    \begin{macrocode}
local SpaceInString = space * Lc [[ \l_@@_space_in_string_tl ]]
%    \end{macrocode}
%
%
% \bigskip
% \subsection{The option 'detected-commands' and al.}
%
% We create four Lua tables called |detected_commands|, |raw_detected_commands|,
% |beamer_commands| and |beamer_environments|.
%
% On the TeX side, the corresponding data have first been stored as clists. 

% Then, in a |\AtBeginDocument|, they have been converted in ``toks registers''
% of TeX.
%
% Now, on the Lua side, we are able to access to those ``toks registers'' with
% the special pseudo-table |tex.toks| of LuaTeX.
%
% Remark that we can safely use |explode(',')| to convert such ``toks
% registers'' in Lua tables since, in a clist of L3, there is no empty
% component and, for each component, there is no space on both sides (the
% |explode| of the Lua of LuaTeX is unable to do itself such purification of the
% components). 
%    \begin{macrocode}
local detected_commands = tex.toks.PitonDetectedCommands : explode ( ',' )
local raw_detected_commands = tex.toks.PitonRawDetectedCommands : explode ( ',' )
local beamer_commands = tex.toks.PitonBeamerCommands : explode ( ',' )  
local beamer_environments = tex.toks.PitonBeamerEnvironments : explode ( ',' ) 
%    \end{macrocode}
%
% We will also create some \textsc{lpeg}.
%
% According to our conventions, a \textsc{lpeg} with a name in camelCase is a
% \textsc{lpeg} which doesn't do any capture.
%    \begin{macrocode}
local detectedCommands = P ( false ) 
for _ , x in ipairs ( detected_commands ) do
  detectedCommands = detectedCommands + P ( "\\" .. x ) 
end 
%    \end{macrocode}
% Further, we will have a \textsc{lpeg} called |DetectedCommands| (in
% PascalCase) which will be a \textsc{lpeg} \emph{with} captures.
%
% \bigskip
%    \begin{macrocode}
local rawDetectedCommands = P ( false ) 
for _ , x in ipairs ( raw_detected_commands ) do
  rawDetectedCommands = rawDetectedCommands + P ( "\\" .. x ) 
end 
%    \end{macrocode}
%
%
%    \begin{macrocode}
local beamerCommands = P ( false ) 
for _ , x in ipairs ( beamer_commands ) do
  beamerCommands = beamerCommands + P ( "\\" .. x ) 
end 
%    \end{macrocode}
%
%    \begin{macrocode}
local beamerEnvironments = P ( false ) 
for _ , x in ipairs ( beamer_environments ) do
  beamerEnvironments = beamerEnvironments + P ( x ) 
end 
%    \end{macrocode}
%
%
% \bigskip
% \paragraph{Several tools for the construction of the main LPEG}
%
%    \begin{macrocode}
local LPEG0 = { }
local LPEG1 = { }
local LPEG2 = { }
local LPEG_cleaner = { }
%    \end{macrocode}
%
% \bigskip
% For each language, we will need a pattern to match expressions with balanced
% braces. Those balanced braces must \emph{not} take into account the braces
% present in strings of the language. However, the syntax for the strings is
% language-dependent. That's why we write a Lua function |Compute_braces| which
% will compute the pattern by taking in as argument a pattern for the strings of
% the language (at least the shorts strings). The argument of |Compute_braces|
% must be a pattern \emph{which does no captures}.
%    \begin{macrocode}
local Compute_braces
function Compute_braces ( lpeg_string ) return 
  P { "E" ,
       E = 
           (
             "{" * V "E" * "}" 
             + 
             lpeg_string
             + 
             ( 1 - S "{}" ) 
           ) ^ 0 
    }
end 
%    \end{macrocode}
%
% 
%         
% \bigskip
% The following Lua function will compute the \text{lpeg} |DetectedCommands|
% which is a \textsc{lpeg} with captures.
%    \begin{macrocode}
local Compute_DetectedCommands
function Compute_DetectedCommands ( lang , braces ) return 
  Ct ( 
       Cc "Open" 
        * C ( detectedCommands * space ^ 0 * P "{" ) 
        * Cc "}" 
     ) 
   * ( braces 
       / ( function ( s ) 
             if s ~= '' then return 
               LPEG1[lang] : match ( s ) 
             end
           end ) 
     )
   * P "}" 
   * Ct ( Cc "Close" ) 
end
%    \end{macrocode}
%
%    \begin{macrocode}
local Compute_RawDetectedCommands
function Compute_RawDetectedCommands ( lang , braces ) return 
  Ct ( C ( rawDetectedCommands * space ^ 0 * P "{" * braces * P "}" ) )
end
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
local Compute_LPEG_cleaner
function Compute_LPEG_cleaner ( lang , braces ) return 
  Ct ( ( ( detectedCommands + rawDetectedCommands ) * "{" 
          * ( braces 
              / ( function ( s ) 
                    if s ~= '' then return 
                      LPEG_cleaner[lang] : match ( s ) 
                    end  
                  end ) 
            )
          * "}" 
         + EscapeClean
         +  C ( P ( 1 ) )
        ) ^ 0 ) / table.concat 
end
%    \end{macrocode}
% 
% \bigskip
% The following function |ParseAgain| will be used in the definitions of the
% LPEG of the different computer languages when we will need to
% \emph{parse again} a small chunk of code. It's a way to avoid the use of a actual
% \emph{grammar} of LPEG (in a sens, a recursive regular expression). 
%
% Remark that there is no \pkg{piton} style associated to a chunk of code which
% is analyzed by |ParseAgain|. If we wish a \pkg{piton} style available to the
% end user (if he wish to format that element with a uniform font instead of
% an analyze by |ParseAgain|), we have to use |\@@_piton:n|. 
%    \begin{macrocode}
local ParseAgain 
function ParseAgain ( code ) 
  if code ~= '' then return 
%    \end{macrocode}
% The variable |piton.language| is set in the function |piton.Parse|.
%    \begin{macrocode}
    LPEG1[piton.language] : match ( code ) 
  end 
end 
%    \end{macrocode}
% 
%
%
% \bigskip
% \paragraph{Constructions for Beamer}
%
% \bigskip
% If the class Beamer is used, some environments and commands of Beamer are
% automatically detected in the listings of \pkg{piton}.
%
%    \begin{macrocode}
local Beamer = P ( false ) 
%    \end{macrocode}
% 
% \bigskip
% The following Lua function will be used to compute the \textsc{lpeg} |Beamer|
% for each computer language.
%
% According to our conventions, the \textsc{lpeg} |Beamer|, with its name in
% PascalCase does captures.
%    \begin{macrocode}
local Compute_Beamer
function Compute_Beamer ( lang , braces ) 
%    \end{macrocode}
%
% \smallskip
% We will compute in |lpeg| the \textsc{lpeg} that we will return.
%    \begin{macrocode}
  local lpeg = L ( P [[\pause]] * ( "[" * ( 1 - P "]" ) ^ 0 * "]" ) ^ -1 ) 
  lpeg = lpeg + 
      Ct ( Cc "Open" 
            * C ( beamerCommands
                  * ( "<" * ( 1 - P ">" ) ^ 0 * ">" ) ^ -1 
                  * P "{" 
                ) 
            * Cc "}" 
         ) 
       * ( braces / 
           ( function ( s ) if s ~= '' then return LPEG1[lang] : match ( s ) end end ) )
       * "}" 
       * Ct ( Cc "Close" ) 
%    \end{macrocode}
% 
%
% \bigskip
% For the command |\alt|, the specification of the overlays (between angular
% brackets) is mandatory. 
%    \begin{macrocode}
  lpeg = lpeg +
    L ( P [[\alt]] * "<" * ( 1 - P ">" ) ^ 0 * ">{" )
     * ( braces / 
         ( function ( s ) if s ~= '' then return LPEG1[lang] : match ( s ) end end ) )
     * L ( P "}{" )
     * ( braces / 
         ( function ( s ) if s ~= '' then return LPEG1[lang] : match ( s ) end end ) )
     * L ( P "}" )
%    \end{macrocode}
%
% \bigskip
% For |\temporal|, the specification of the overlays (between angular brackets)
% is mandatory. 
%    \begin{macrocode}
  lpeg = lpeg +
      L ( P [[\temporal]] * "<" * ( 1 - P ">" ) ^ 0 * ">{" )
      * ( braces 
          / ( function ( s ) 
              if s ~= '' then return LPEG1[lang] : match ( s ) end end ) )
      * L ( P "}{" )
      * ( braces 
          / ( function ( s ) 
              if s ~= '' then return LPEG1[lang] : match ( s ) end end ) )
      * L ( P "}{" )
      * ( braces 
          / ( function ( s ) 
              if s ~= '' then return LPEG1[lang] : match ( s ) end end ) )
      * L ( P "}" )
%    \end{macrocode}
%
% \bigskip
% Now, the environments of Beamer.
%    \begin{macrocode}
  for _ , x in ipairs ( beamer_environments ) do
    lpeg = lpeg +
          Ct ( Cc "Open" 
               * C ( 
                     P ( [[\begin{]] .. x .. "}" )
                        * ( "<" * ( 1 - P ">") ^ 0 * ">" ) ^ -1  
                    )
               * space ^ 0 * ( P "\r" ) ^ 1 -- added 25/08/23
              * Cc ( [[\end{]] .. x ..  "}" )               
              )
          * (
%    \end{macrocode}
% We catch all the content of the Beamer environment which a \textsc{lpeg} which is
% a grammar because t here may be nested environments of the same type
% (added 2025/11/14).
%    \begin{macrocode}
               (  
                 P { "E" ,
                      E = (
                            P ( [[\begin{]] .. x .. "}" )
                             * V "E"
                             * P ( [[\end{]] .. x .. "}" ) 
                            +                       
                             (
                              1
                              - P ( [[\begin{]] .. x .. "}" )
                              - P ( [[\end{]] .. x .. "}" )
                             ) 
                          ) ^ 0
                   }
               ) 
                  / ( function ( s ) 
                        if s ~= '' then return 
                          LPEG1[lang] : match ( s ) 
                        end 
                      end ) 
            )
          * P ( [[\end{]] .. x .. "}" )
          * Ct ( Cc "Close" ) 
  end 
%    \end{macrocode}
%
% \bigskip
% Now, you can return the value we have computed.
%    \begin{macrocode}
  return lpeg 
end
%    \end{macrocode}
%
% 
% \bigskip
% The following LPEG is in relation with the key |math-comments|. It will be
% used in all the languages.
%    \begin{macrocode}
local CommentMath = 
  P "$" * K ( 'Comment.Math' , ( 1 - S "$\r" ) ^ 1  ) * P "$" -- $
%    \end{macrocode}
% 
%
% \bigskip
% \paragraph{EOL}
%
% There may be empty lines in the transcription of the prompt, \emph{id est} lines of
% the form |...| without space after and that's why we need |P " " ^ -1| with the |^ -1|.
%    \begin{macrocode}
local Prompt = 
  K ( 'Prompt' , ( P ">>>" + "..." ) * P " " ^ -1 ) 
  *  Lc [[ \rowcolor { \l_@@_prompt_bg_color_tl } ]] 
%    \end{macrocode}
%
%
% \bigskip
% The following \textsc{lpeg} |EOL| is for the end of lines.
%    \begin{macrocode}
local EOL = 
  P "\r" 
  *
  (
    space ^ 0 * -1 
    + 
    Cc "EOL" 
  )
  * ( LeadingSpace ^ 0 * # ( 1 - S " \r" ) ) ^ -1
%    \end{macrocode}
%
% 
% \bigskip
% The following \textsc{lpeg} |CommentLaTeX| is for what is called in that
% document the ``LaTeX comments''.
%    \begin{macrocode}
local CommentLaTeX =
  P ( piton.comment_latex ) 
  * Lc [[{\PitonStyle{Comment.LaTeX}{\ignorespaces]]
  * L ( ( 1 - P "\r" ) ^ 0 ) 
  * Lc "}}"
  * ( EOL + -1 )  
%    \end{macrocode}
% 
% 
% \bigskip
% \subsection{The language Python}
% 
% We open a Lua local scope for the language Python (of course, there will be
% also global definitions).
%    \begin{macrocode}
--python Python
do 
%    \end{macrocode}
%
% \bigskip
% Some strings of length 2 are explicit because we want the corresponding
% ligatures available in some fonts such as \emph{Fira Code} to be active.
%    \begin{macrocode}
  local Operator = 
    K ( 'Operator' ,
        P "!=" + "<>" + "==" + "<<" + ">>" + "<=" + ">=" + ":=" + "//" + "**" 
        + S "-~+/*%=<>&.@|" )

  local OperatorWord = 
    K ( 'Operator.Word' , P "in" + "is" + "and" + "or" + "not" )
%    \end{macrocode}
%
% \smallskip
% The keyword |in| in a construction such as ``|for i in range(n)|'' must be
% formatted as a keyword and not as an |Operator.Word| and that's why we write
% the following LPEG |For|.
%    \begin{macrocode}
  local For = K ( 'Keyword' , P "for" ) 
              * Space
              * Identifier
              * Space 
              * K ( 'Keyword' , P "in" ) 

  local Keyword = 
    K ( 'Keyword' ,
        P  "assert" + "as" + "break" + "case" + "class" + "continue" + "def" +
        "del" + "elif" + "else" + "except" + "exec" + "finally" + "for" + "from" +
        "global" + "if" + "import" + "lambda" + "non local" + "pass" + "return" +
        "try" + "while" + "with" + "yield" + "yield from" )
    + K ( 'Keyword.Constant' , P "True" + "False" + "None" ) 

  local Builtin = 
    K ( 'Name.Builtin' ,
        P "__import__" + "abs" + "all" + "any" + "bin" + "bool" + "bytearray" +
        "bytes" + "chr" + "classmethod" + "compile" + "complex" + "delattr" +
        "dict" + "dir" + "divmod" + "enumerate" + "eval" + "filter" + "float" +
        "format" + "frozenset" + "getattr" + "globals" + "hasattr" + "hash" +
        "hex" + "id" + "input" + "int" + "isinstance" + "issubclass" + "iter" +
        "len" + "list" + "locals" + "map" + "max" + "memoryview" + "min" + "next"
        + "object" + "oct" + "open" + "ord" + "pow" + "print" + "property" +
        "range" + "repr" + "reversed" + "round" + "set" + "setattr" + "slice" +
        "sorted" + "staticmethod" + "str" + "sum" + "super" + "tuple" + "type" +
        "vars" + "zip" ) 

  local Exception =
    K ( 'Exception' ,
        P "ArithmeticError" + "AssertionError" + "AttributeError" +
        "BaseException" + "BufferError" + "BytesWarning" + "DeprecationWarning" +
        "EOFError" + "EnvironmentError" + "Exception" + "FloatingPointError" +
        "FutureWarning" + "GeneratorExit" + "IOError" + "ImportError" +
        "ImportWarning" + "IndentationError" + "IndexError" + "KeyError" +
        "KeyboardInterrupt" + "LookupError" + "MemoryError" + "NameError" +
        "NotImplementedError" + "OSError" + "OverflowError" +
        "PendingDeprecationWarning" + "ReferenceError" + "ResourceWarning" +
        "RuntimeError" + "RuntimeWarning" + "StopIteration" + "SyntaxError" +
        "SyntaxWarning" + "SystemError" + "SystemExit" + "TabError" + "TypeError"
        + "UnboundLocalError" + "UnicodeDecodeError" + "UnicodeEncodeError" +
        "UnicodeError" + "UnicodeTranslateError" + "UnicodeWarning" +
        "UserWarning" + "ValueError" + "VMSError" + "Warning" + "WindowsError" +
        "ZeroDivisionError" + "BlockingIOError" + "ChildProcessError" +
        "ConnectionError" + "BrokenPipeError" + "ConnectionAbortedError" +
        "ConnectionRefusedError" + "ConnectionResetError" + "FileExistsError" +
        "FileNotFoundError" + "InterruptedError" + "IsADirectoryError" +
        "NotADirectoryError" + "PermissionError" + "ProcessLookupError" +
        "TimeoutError" + "StopAsyncIteration" + "ModuleNotFoundError" +
        "RecursionError" ) 

  local RaiseException = K ( 'Keyword' , P "raise" ) * SkipSpace * Exception * Q "("  
%    \end{macrocode}
%
% \bigskip
% In Python, a ``decorator'' is a statement whose begins by |@| which patches
% the function defined in the following statement.
%    \begin{macrocode}
  local Decorator = K ( 'Name.Decorator' , P "@" * letter ^ 1  ) 
%    \end{macrocode}
% 
% \bigskip
% The following \textsc{lpeg} |DefClass| will be used to detect the definition of a
% new class (the name of that new class will be formatted with the \pkg{piton}
% style |Name.Class|). 
%
% \smallskip
% Example:\enskip \piton{class myclass:}
%    \begin{macrocode}
  local DefClass = 
    K ( 'Keyword' , "class" ) * Space * K ( 'Name.Class' , identifier ) 
%    \end{macrocode}
% 
% If the word |class| is not followed by a identifier, it will be caught as
% keyword by the \textsc{lpeg} |Keyword| (useful if we want to type a
% list of keywords).
%
% \bigskip
% The following \textsc{lpeg} |ImportAs| is used for the lines beginning by |import|.
% % We have to detect the potential keyword |as| because both the name of the
% module and its alias must be formatted with the \pkg{piton} style |Name.Namespace|.
%
% \smallskip
% Example:\enskip \piton{import numpy as np}
%
% \smallskip
% Moreover, after the keyword |import|, it's possible to have a comma-separated
% list of modules (if the keyword |as| is not used).
%
% \smallskip
% Example:\enskip \piton{import math, numpy}
%    \begin{macrocode}
  local ImportAs = 
    K ( 'Keyword' , "import" )
     * Space 
     * K ( 'Name.Namespace' , identifier * ( "." * identifier ) ^ 0 )
     * ( 
         ( Space * K ( 'Keyword' , "as" ) * Space 
            * K ( 'Name.Namespace' , identifier ) )
         + 
         ( SkipSpace * Q "," * SkipSpace 
            * K ( 'Name.Namespace' , identifier ) ) ^ 0 
       ) 
%    \end{macrocode}
% Be careful: there is no commutativity of |+| in the previous expression.
%
% \bigskip
% The \textsc{lpeg} |FromImport| is used for the lines beginning by |from|. We
% need a special treatment because the identifier following the keyword |from|
% must be formatted with the \pkg{piton} style |Name.Namespace| and the
% following keyword |import| must be formatted with the \pkg{piton} style
% |Keyword| and must \emph{not} be caught by the \textsc{lpeg} |ImportAs|.
%
% \smallskip
% Example:\enskip \piton{from math import pi}
%
% \smallskip
%    \begin{macrocode}
  local FromImport =
    K ( 'Keyword' , "from" ) 
      * Space * K ( 'Name.Namespace' , identifier )
      * Space * K ( 'Keyword' , "import" ) 
%    \end{macrocode}
%
% \bigskip
% \paragraph{The strings of Python}
%
% For the strings in Python, there are four categories of delimiters (without
% counting the prefixes for f-strings and raw strings). We will use, in the
% names of our \textsc{lpeg}, prefixes to distinguish the \textsc{lpeg} dealing
% with that categories of strings, as presented in the following tabular.
% \begin{center}
% \begin{tabular}{@{}lcc@{}}
% \toprule
%         & |Single| & |Double| \\
% \midrule
% |Short| & |'text'|     & |"text"| \\
% |Long|  & |'''test'''| & |"""text"""| \\
% \bottomrule
% \end{tabular}
% \end{center}
%
% 
% \bigskip
% We have also to deal with the interpolations in the f-strings. Here
% is an example of a f-string with an interpolation and a format
% instruction\footnote{There is no special \pkg{piton} style for the formatting
% instruction (after the colon): the style which will be applied will be the
% style of the encompassing string, that is to say |String.Short| or
% |String.Long|.} in that interpolation:
%
% |\piton{f'Total price: {total+1:.2f} €'}|
%
%
% \bigskip
% The interpolations beginning by |%| (even though there is more modern
% techniques now in Python).
%    \begin{macrocode}
  local PercentInterpol =  
    K ( 'String.Interpol' , 
        P "%" 
        * ( "(" * alphanum ^ 1 * ")" ) ^ -1 
        * ( S "-#0 +" ) ^ 0 
        * ( digit ^ 1 + "*" ) ^ -1 
        * ( "." * ( digit ^ 1 + "*" ) ) ^ -1 
        * ( S "HlL" ) ^ -1
        * S "sdfFeExXorgiGauc%" 
      ) 
%    \end{macrocode}
% 
% \bigskip
% We can now define the \textsc{lpeg} for the four kinds of strings. It's not
% possible to use our function~|K| because of the interpolations which must be
% formatted with another \pkg{piton} style that the rest of the
% string.\footnote{The interpolations are formatted with the \pkg{piton} style
% |Interpol.Inside|. The initial value of that style is \texttt{\textbackslash
% @@\_piton:n} which means that the interpolations are parsed once again by \pkg{piton}.}
%    \begin{macrocode}
  local SingleShortString =
    WithStyle ( 'String.Short.Internal' ,
%    \end{macrocode}
% First, we deal with the f-strings of Python, which are prefixed by |f| or |F|.
%    \begin{macrocode}
           Q ( P "f'" + "F'" ) 
           * ( 
               K ( 'String.Interpol' , "{" )
                * K ( 'Interpol.Inside' , ( 1 - S "}':" ) ^ 0  )
                * Q ( P ":" * ( 1 - S "}:'" ) ^ 0 ) ^ -1
                * K ( 'String.Interpol' , "}" )
               + 
               SpaceInString 
               + 
               Q ( ( P "\\'" + "\\\\" + "{{" + "}}" + 1 - S " {}'" ) ^ 1 )
             ) ^ 0 
           * Q "'" 
         + 
%    \end{macrocode}
% Now, we deal with the standard strings of Python, but also the ``raw strings''.
%    \begin{macrocode}
           Q ( P "'" + "r'" + "R'" ) 
           * ( Q ( ( P "\\'" + "\\\\" + 1 - S " '\r%" ) ^ 1 ) 
               + SpaceInString 
               + PercentInterpol 
               + Q "%" 
             ) ^ 0 
           * Q "'" )
%    \end{macrocode}
%
%    \begin{macrocode}
  local DoubleShortString =
    WithStyle ( 'String.Short.Internal' , 
           Q ( P "f\"" + "F\"" ) 
           * ( 
               K ( 'String.Interpol' , "{" )
                 * K ( 'Interpol.Inside' , ( 1 - S "}\":" ) ^ 0 )
                 * ( K ( 'String.Interpol' , ":" ) * Q ( (1 - S "}:\"") ^ 0 ) ) ^ -1
                 * K ( 'String.Interpol' , "}" )
               + 
               SpaceInString 
               + 
               Q ( ( P "\\\"" + "\\\\" + "{{" + "}}" + 1 - S " {}\"" ) ^ 1 ) 
              ) ^ 0
           * Q "\"" 
         +
           Q ( P "\"" + "r\"" + "R\"" ) 
           * ( Q ( ( P "\\\"" + "\\\\" + 1 - S " \"\r%" ) ^ 1 ) 
               + SpaceInString 
               + PercentInterpol 
               + Q "%"
             ) ^ 0 
           * Q "\""  )

  local ShortString = SingleShortString + DoubleShortString
%    \end{macrocode}
%
% \bigskip
% \paragraph{Beamer}
%
% The argument of |Compute_braces| must be a pattern \emph{which does no
% catching} corresponding to the strings of the language.
%
%    \begin{macrocode}
  local braces = 
    Compute_braces 
     (
         ( P "\"" + "r\"" + "R\"" + "f\"" + "F\"" ) 
             * ( P '\\\"' + 1 - S "\"" ) ^ 0 * "\""  
       + 
         ( P '\'' + 'r\'' + 'R\'' + 'f\'' + 'F\'' ) 
             * ( P '\\\'' + 1 - S '\'' ) ^ 0 * '\''  
     )

  if piton.beamer then Beamer = Compute_Beamer ( 'python' , braces ) end
%    \end{macrocode}
%
% \bigskip
% \paragraph{Detected commands}
%
%    \begin{macrocode}
  DetectedCommands = Compute_DetectedCommands ( 'python' , braces ) 
       + Compute_RawDetectedCommands ( 'python' , braces )
%    \end{macrocode}
%
% \bigskip
%
% \paragraph{LPEG_cleaner}
%
%    \begin{macrocode}
  LPEG_cleaner.python = Compute_LPEG_cleaner ( 'python' , braces ) 
%    \end{macrocode}
% 
% \bigskip
% \paragraph{The long strings}
% 
% 
%    \begin{macrocode}
  local SingleLongString =
    WithStyle ( 'String.Long.Internal' , 
       ( Q ( S "fF" * P "'''" )
           * (
               K ( 'String.Interpol' , "{" )
                 * K ( 'Interpol.Inside' , ( 1 - S "}:\r" - "'''" ) ^ 0  )
                 * Q ( P ":" * (1 - S "}:\r" - "'''" ) ^ 0 ) ^ -1
                 * K ( 'String.Interpol' , "}"  )
               + 
               Q ( ( 1 - P "'''" - S "{}'\r" ) ^ 1 )
               + 
               EOL
             ) ^ 0 
         +
           Q ( ( S "rR" ) ^ -1  * "'''" )
           * (
               Q ( ( 1 - P "'''" - S "\r%" ) ^ 1 )  
               + 
               PercentInterpol
               +
               P "%"
               +
               EOL
             ) ^ 0 
        )
        * Q "'''"  ) 
%    \end{macrocode}
%   
%    \begin{macrocode}
  local DoubleLongString =
    WithStyle ( 'String.Long.Internal' ,
       (
          Q ( S "fF" * "\"\"\"" )
          * (
              K ( 'String.Interpol', "{"  )
                * K ( 'Interpol.Inside' , ( 1 - S "}:\r" - "\"\"\"" ) ^ 0 )
                * Q ( ":" * (1 - S "}:\r" - "\"\"\"" ) ^ 0 ) ^ -1
                * K ( 'String.Interpol' , "}"  )
              + 
              Q ( ( 1 - S "{}\"\r" - "\"\"\"" ) ^ 1 ) 
              + 
              EOL
            ) ^ 0 
        +
          Q ( S "rR" ^ -1  * "\"\"\"" )
          * (
              Q ( ( 1 - P "\"\"\"" - S "%\r" ) ^ 1 )  
              + 
              PercentInterpol 
              + 
              P "%"
              + 
              EOL
            ) ^ 0 
       )
       * Q "\"\"\"" 
    ) 
%    \end{macrocode}
%
%    \begin{macrocode}
  local LongString = SingleLongString + DoubleLongString
%    \end{macrocode}
%
% \bigskip
% We have a \textsc{lpeg} for the Python docstrings. That \textsc{lpeg} will
% be used in the \textsc{lpeg} |DefFunction| which deals with the whole preamble
% of a function definition (which begins with |def|).
%    \begin{macrocode}
  local StringDoc = 
      K ( 'String.Doc.Internal' , P "r" ^ -1 * "\"\"\"" )
        * ( K ( 'String.Doc.Internal' , (1 - P "\"\"\"" - "\r" ) ^ 0  ) * EOL
            * Tab ^ 0 
          ) ^ 0
        * K ( 'String.Doc.Internal' , ( 1 - P "\"\"\"" - "\r" ) ^ 0 * "\"\"\"" )
%    \end{macrocode}
%
% \bigskip
% \paragraph{The comments in the Python listings}
%
% We define different \textsc{lpeg} dealing with comments in the Python
% listings.
%    \begin{macrocode}
  local Comment = 
    WithStyle 
     ( 'Comment.Internal' ,
       Q "#" * ( CommentMath + Q ( ( 1 - S "$\r" ) ^ 1 ) ) ^ 0  -- $
     ) 
    * ( EOL + -1 )
%    \end{macrocode}
% 
% 
% \bigskip
% \paragraph{DefFunction}
%
% The following \textsc{lpeg} |expression| will be used for the parameters in
% the \emph{argspec} of a Python function. It's necessary to use a \emph{grammar}
% because that pattern mainly checks the correct nesting of the delimiters
% (and it's known in the theory of formal languages that this can't be done with
% regular expressions \emph{stricto sensu} only). 
%    \begin{macrocode}
  local expression =
    P { "E" ,
         E = ( "'" * ( P "\\'" + 1 - S "'\r" ) ^ 0 * "'" 
               + "\"" * ( P "\\\"" + 1 - S "\"\r" ) ^ 0 * "\""
               + "{" * V "F" * "}"
               + "(" * V "F" * ")"
               + "[" * V "F" * "]" 
               + ( 1 - S "{}()[]\r," ) ) ^ 0 ,
         F = (   "{" * V "F" * "}"
               + "(" * V "F" * ")"
               + "[" * V "F" * "]"
               + ( 1 - S "{}()[]\r\"'" ) ) ^ 0
      }
%    \end{macrocode}
%
% \bigskip 
% We will now define a \textsc{lpeg} |Params| that will catch the list of
% parameters (that is to say the \emph{argspec}) in the definition of a Python
% function. For example, in the line of code
% \begin{center}
% \piton{def MyFunction(a,b,x=10,n:int): return n}
% \end{center}
% the \textsc{lpeg} |Params| will be used to catch the chunk\enskip |a,b,x=10,n:int|.
%
% \medskip
%    \begin{macrocode}
  local Params = 
    P { "E" , 
         E = ( V "F" * ( Q "," * V "F" ) ^ 0 ) ^ -1 ,
         F = SkipSpace * ( Identifier + Q "*args" + Q "**kwargs" ) * SkipSpace
             * ( Q ":" * SkipSpace * K ( 'Name.Type' , identifier ) ) ^ -1
             * ( SkipSpace * K ( 'InitialValues' , "=" * SkipSpace * expression ) ) ^ -1
      }
%    \end{macrocode}
% 
% 
% \bigskip
% The following \textsc{lpeg} |DefFunction| catches a keyword |def| and the
% following name of function \emph{but also everything else until a potential
% docstring}. That's why this definition of \textsc{lpeg} must occur (in the file
% |piton.sty|) after the definition of several other \textsc{lpeg} such as
% |Comment|, |CommentLaTeX|, |Params|, |StringDoc|...
%    \begin{macrocode}
  local DefFunction =
    K ( 'Keyword' , "def" )
    * Space
    * K ( 'Name.Function.Internal' , identifier ) 
    * SkipSpace 
    * Q "("  * Params * Q ")" 
    * SkipSpace
    * ( Q "->" * SkipSpace * K ( 'Name.Type' , identifier ) ) ^ -1
%    \end{macrocode}
% 
%    \begin{macrocode}
    * ( C ( ( 1 - S ":\r" ) ^ 0 ) / ParseAgain )
    * Q ":" 
    * ( SkipSpace
        * ( EOL + CommentLaTeX + Comment ) -- in all cases, that contains an EOL
        * Tab ^ 0 
        * SkipSpace
        * StringDoc ^ 0 -- there may be additional docstrings 
      ) ^ -1
%    \end{macrocode}
% Remark that, in the previous code, |CommentLaTeX| \emph{must} appear
% before |Comment|: there is no commutativity of the addition for the
% \emph{parsing expression grammars} (\textsc{peg}).
% 
% \smallskip 
% If the word |def| is not followed by an identifier and parenthesis, it will be
% caught as keyword by the \textsc{lpeg} |Keyword| (useful if, for example, the
% end user wants to speak of the keyword \piton{def}).
%
%
% \paragraph{Miscellaneous}
% 
%    \begin{macrocode}
  local ExceptionInConsole = Exception *  Q ( ( 1 - P "\r" ) ^ 0 ) * EOL 
%    \end{macrocode}
% 
% 
% \bigskip
% \paragraph{The main LPEG for the language Python}
%
%    \begin{macrocode}
  local EndKeyword 
    = Space + Punct + Delim + EOL + Beamer + DetectedCommands + Escape +
    EscapeMath + -1 
%    \end{macrocode}
%
% First, the main loop :
%    \begin{macrocode}
  local Main = 
       space ^ 0 * EOL -- faut-il le mettre en commentaire ?
       + Space 
       + Tab
       + Escape + EscapeMath
       + Beamer
       + CommentLaTeX
       + DetectedCommands
       + Prompt
       + LongString 
       + Comment
       + ExceptionInConsole
       + Delim
       + Operator
       + OperatorWord * EndKeyword
       + ShortString
       + Punct
       + FromImport
       + RaiseException 
       + DefFunction
       + DefClass 
       + For
       + Keyword * EndKeyword
       + Decorator
       + Builtin * EndKeyword
       + Identifier 
       + Number
       + Word
%    \end{macrocode}
%
% \bigskip
% Here, we must not put |local|, of course.
%    \begin{macrocode}
  LPEG1.python = Main ^ 0 
%    \end{macrocode}
%
% \bigskip
% We recall that each line in the Python code to parse will be sent back to
% LaTeX between a pair |\@@_begin_line:| -- |\@@_end_line:|\footnote{Remember
% that the \texttt{\textbackslash @@\_end\_line:} must be explicit because it
% will be used as marker in order to delimit the argument of the command
% \texttt{\textbackslash @@\_begin\_line:}}.
%    \begin{macrocode}
  LPEG2.python = 
    Ct (
         ( space ^ 0 * "\r" ) ^ -1 
         * Lc [[ \@@_begin_line: ]]
         * LeadingSpace ^ 0 
         * ( space ^ 1 * -1 + space ^ 0 * EOL + Main ) ^ 0 
         * -1 
         * Lc [[ \@@_end_line: ]] 
       )
%    \end{macrocode}
%
% \bigskip
% End of the Lua scope for the language Python.
%    \begin{macrocode}
end
%    \end{macrocode}
%
% 
% \subsection{The language OCaml}
%
% We open a Lua local scope for the language OCaml (of course, there will be also
% global definitions).
%    \begin{macrocode}
--ocaml Ocaml OCaml
do 
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local SkipSpace = ( Q " " + EOL ) ^ 0
  local Space = ( Q " " + EOL ) ^ 1
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local braces = Compute_braces ( '\"' * ( 1 - S "\"" ) ^ 0 * '\"' )
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  if piton.beamer then Beamer = Compute_Beamer ( 'ocaml' , braces ) end
  DetectedCommands = 
    Compute_DetectedCommands ( 'ocaml' , braces )
    + Compute_RawDetectedCommands ( 'ocaml' , braces )
  local Q
%    \end{macrocode}
% Usually, the following version of the function |Q| will be used without the
% second arguemnt (|strict|), that is to say in a loosy way. However, in some
% circunstancies, we will a need the ``strict'' version, for instance in
% |DefFunction|. 
%    \begin{macrocode}
  function Q ( pattern, strict ) 
    if strict ~= nil then
      return Ct ( Cc ( luatexbase.catcodetables.CatcodeTableOther ) * C ( pattern ) )
    else
      return Ct ( Cc ( luatexbase.catcodetables.CatcodeTableOther ) * C ( pattern ) )
          + Beamer + DetectedCommands + EscapeMath + Escape
    end     
  end
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local K
  function K ( style , pattern, strict ) return
    Lc ( [[ {\PitonStyle{ ]] .. style .. "}{" )
    * Q ( pattern, strict )
    * Lc "}}"
  end
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local WithStyle
  function WithStyle ( style , pattern ) return
      Ct ( Cc "Open" * Cc ( [[{\PitonStyle{]] .. style .. "}{" ) * Cc "}}" )
    * (pattern + Beamer + DetectedCommands + EscapeMath + Escape)
    * Ct ( Cc "Close" )
  end
%    \end{macrocode}
% 
% \bigskip
% The following LPEG corresponds to the balanced expressions (balanced according
% to the parenthesis). Of course, we must write |(1 - S "()")| with outer parenthesis.
%    \begin{macrocode}
  local balanced_parens =
    P { "E" , E = ( "(" * V "E" * ")" + ( 1 - S "()" ) ) ^ 0 }
%    \end{macrocode}
%
% \paragraph{The strings of OCaml}
%    \begin{macrocode}
  local ocaml_string =
    P "\""
  * (
      P " " 
      +
      P ( ( P '\\\"' + 1 - S " \"\r" ) ^ 1 )
      +
      EOL -- ?
    ) ^ 0
  * P "\""
%    \end{macrocode}
%
%    \begin{macrocode}
  local String = 
    WithStyle 
      ( 'String.Long.Internal' , 
          Q "\""
        * (
            SpaceInString
            +
            Q ( ( P '\\\"' +  1 - S " \"\r" ) ^ 1 )
            +
            EOL
          ) ^ 0
        * Q "\""
      )
%    \end{macrocode}
%
% \bigskip
% Now, the ``quoted strings'' of OCaml (for example \verb+{ext|Essai|ext}+). 
%
% For those strings, we will do two consecutive analysis. First an analysis to
% determine the whole string and, then, an analysis for the potential visual
% spaces and the EOL in the string.
% 
% The first analysis require a match-time capture. For explanations about that
% programmation, see the paragraphe \emph{Lua's long strings} in
% |www.inf.puc-rio.br/~roberto/lpeg|. 
%
%    \begin{macrocode}
  local ext = ( R "az" + "_" ) ^ 0
  local open = "{" * Cg ( ext , 'init' ) * "|"
  local close = "|" * C ( ext ) * "}"
  local closeeq =
    Cmt ( close * Cb ( 'init' ) ,
          function ( s , i , a , b ) return a == b end )
%    \end{macrocode}
%
% \medskip
% The \textsc{lpeg} |QuotedStringBis| will do the second analysis. 
%    \begin{macrocode}
  local QuotedStringBis =
    WithStyle ( 'String.Long.Internal' ,
        (
          Space
          +
          Q ( ( 1 - S " \r" ) ^ 1 )
          +
          EOL
        ) ^ 0  )
%    \end{macrocode}
% 
% \medskip
% We use a ``function capture'' (as called in the official documentation of the
% \textsc{lpeg}) in order to do the second analysis on the result of the first one.
%    \begin{macrocode}
  local QuotedString =
    C ( open * ( 1 - closeeq ) ^ 0  * close ) /
    ( function ( s ) return QuotedStringBis : match ( s ) end )
%    \end{macrocode}
%
% \bigskip
% In OCaml, the delimiters for the comments are |(*| and |*)|. There are
% unsymmetrical and OCaml allows those comments to be nested. That's why we need a
% grammar.
% 
% In these comments, we embed the math comments (between |$| and |$|) and we
% embed also a treatment for the end of lines (since the comments may be multi-lines).
% 
%    \begin{macrocode}
  local comment = 
      P {
          "A" ,
          A = Q "(*"
              * ( V "A"
                  + Q ( ( 1 - S "\r$\"" - "(*" - "*)" ) ^ 1 ) -- $
                  + Q ( ocaml_string )
                  + "$" * K ( 'Comment.Math' , ( 1 - S "$\r" ) ^ 1 ) * "$" -- $
                  + EOL
                ) ^ 0
              * Q "*)"
        }   
  local Comment = WithStyle ( 'Comment.Internal' , comment ) 
%    \end{macrocode}
%
% 
% \paragraph{Some standard LPEG}
%
%    \begin{macrocode}
  local Delim = Q ( P "[|" + "|]" + S "[()]" )
  local Punct = Q ( S ",:;!" )
%    \end{macrocode}
%
% \bigskip
% The identifiers caught by |cap_identifier| begin with a capital. In OCaml,
% it's used for the constructors of types and for the names of the modules.
%
%    \begin{macrocode}
  local cap_identifier = R "AZ" * ( R "az" + R "AZ" + S "_'" + digit ) ^ 0
%    \end{macrocode}
%
% \bigskip
% We consider |::|  and |[]| as constructors (of the lists) as does the Tuareg
% mode of Emacs.
%    \begin{macrocode}
  local Constructor =
    P "::"
%    \end{macrocode}
% Don't use |\hspace| instead of |\kern|
%    \begin{macrocode}
    * Lc [[{\PitonStyle{Name.Constructor}{\kern0.1em:\kern-0.2em:\kern0.1em}}]]
     +
    P "[]"
    * Lc ([[{\PitonStyle{Name.Constructor}{\kern-0.1em[\kern0.1em]}}]])     
    K ( 'Name.Constructor' , 
        Q "`" ^ -1 * cap_identifier 
        + Q ( "[" , true ) * SkipSpace * Q ( "]" , true) )
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local ModuleType = K ( 'Name.Type' , cap_identifier )
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local OperatorWord =
    K ( 'Operator.Word' ,
        P "asr" + "land" + "lor" + "lsl" + "lxor" + "mod" + "or" + "not" )
%    \end{macrocode}
% 
% \bigskip
% In OCaml, some keywords are considered as \emph{governing keywords} with some
% special syntactic characteristics.
%    \begin{macrocode}
  local governing_keyword = P "and" + "begin" + "class" + "constraint" +
        "end" + "external" + "functor" + "include" + "inherit" + "initializer" +
        "in" + "let" + "method" + "module" + "object" + "open" + "rec" + "sig" +
        "struct" + "type" + "val"
%    \end{macrocode}
%   
% \bigskip
%    \begin{macrocode}
  local Keyword =
    K ( 'Keyword' ,
        P "assert" + "as" + "done" + "downto" + "do" + "else" + "exception"
        + "for" + "function"  + "fun" + "if" + "lazy" + "match" + "mutable"
        + "new" + "of" + "private" + "raise" + "then" + "to" + "try"
        + "virtual" + "when" + "while" + "with" )
    + K ( 'Keyword.Constant' , P "true" + "false" )
    + K ( 'Keyword.Governing', governing_keyword )
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local EndKeyword 
    = Space + Punct + Delim + EOL + Beamer + DetectedCommands + Escape 
       + EscapeMath + -1 
%    \end{macrocode}
%
% \bigskip
% Now, the identifier. Recall that we have also a LPEG |cap_identifier| for the
% indentifiers beginning with a capital letter.
%    \begin{macrocode}
  local identifier = ( R "az" + "_" ) * ( R "az" + R "AZ" + S "_'" + digit ) ^ 0 
                     - ( OperatorWord + Keyword ) * EndKeyword
%    \end{macrocode}
%
% \bigskip
% We have the internal style |Identifier.Internal| in order to be able to
% implement the mechanism |\SetPitonIdentifier|. The final user has access to a
% style called |Identifier|.
%    \begin{macrocode}
  local Identifier = K ( 'Identifier.Internal' , identifier )
%    \end{macrocode}
%
% \bigskip
% In OCmal, \emph{character} is a type different of the type |string|.
%    \begin{macrocode}
  local ocaml_char = 
      P "'" *
      (
        ( 1 - S "'\\" )
        + "\\"
          * ( S "\\'ntbr \""
              + digit * digit * digit
              + P "x" * ( digit + R "af" + R "AF" )
                      * ( digit + R "af" + R "AF" )
                      * ( digit + R "af" + R "AF" )
              + P "o" * R "03" * R "07" * R "07" )
      )
      * "'"
  local Char =
    K ( 'String.Short.Internal', ocaml_char ) 
%    \end{macrocode}
%
% \bigskip
% For the parameter of the types (for example : |`\a| as in |`a list|).
%    \begin{macrocode}
  local TypeParameter =
    K ( 'TypeParameter' ,
        "'" * Q "_" ^ -1 * alpha ^ 1 * digit ^ 0 * ( # ( 1 - P "'" ) + -1 ) )
%    \end{macrocode}
%
% \paragraph{DotNotation}
% 
% Now, we deal with the notations with points (eg: |List.length|). In OCaml,
% such notation is used for the fields of the records and for the modules.
%    \begin{macrocode}
  local DotNotation =
      (
          K ( 'Name.Module' , cap_identifier ) 
            * Q "."
            * ( Identifier + Constructor + Q "(" + Q "[" + Q "{" ) ^ -1 
          +
           Identifier
            * Q "."
            * K ( 'Name.Field' , identifier )
      )
      * ( Q "." * K ( 'Name.Field' , identifier ) ) ^ 0    
%    \end{macrocode}
%
% \paragraph{The records}
%
%    \begin{macrocode}
  local expression_for_fields_type =
    P { "E" ,
        E =  (  "{" * V "F" * "}"
              + "(" * V "F" * ")"
              + TypeParameter
              + ( 1 - S "{}()[]\r;" ) ) ^ 0 ,
        F = (    "{" * V "F" * "}"
              + "(" * V "F" * ")"
              + ( 1 - S "{}()[]\r\"'" ) + TypeParameter ) ^ 0
      }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local expression_for_fields_value =
    P { "E" ,
        E =  (   "{" * V "F" * "}"
              + "(" * V "F" * ")"
              + "[" * V "F" * "]"
              + ocaml_string + ocaml_char
              + ( 1 - S "{}()[];" ) ) ^ 0 ,
        F = (    "{" * V "F" * "}"
              + "(" * V "F" * ")"
              + "[" * V "F" * "]"
              + ocaml_string + ocaml_char
              + ( 1 - S "{}()[]\"'" )) ^ 0
      }
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local OneFieldDefinition =
      ( K ( 'Keyword' , "mutable" ) * SkipSpace ) ^ -1
    * K ( 'Name.Field' , identifier ) * SkipSpace
    * Q ":" * SkipSpace
    * K ( 'TypeExpression' , expression_for_fields_type )
    * SkipSpace
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local OneField =
      K ( 'Name.Field' , identifier ) * SkipSpace
    * Q "=" * SkipSpace
%    \end{macrocode}
% Don't forget the parentheses!
%    \begin{macrocode}
    * ( C ( expression_for_fields_value ) / ParseAgain ) 
    * SkipSpace
%    \end{macrocode}
%
% \bigskip
% The \emph{records}.
%    \begin{macrocode}
  local RecordVal =
    Q "{" * SkipSpace
    *
      (
        (Identifier + DotNotation) * Space * K('Keyword', "with") * Space
      ) ^-1
    *
      (
        OneField * ( Q ";" * SkipSpace * ( Comment * SkipSpace ) ^ 0 * OneField ) ^ 0
      )
    * SkipSpace
    * Q ";" ^ -1
    * SkipSpace
    * Comment ^ -1
    * SkipSpace
    * Q "}"
  local RecordType =
    Q "{" * SkipSpace
    *
      (
        OneFieldDefinition
        * ( Q ";" * SkipSpace * ( Comment * SkipSpace ) ^ 0 * OneFieldDefinition ) ^ 0
      )
    * SkipSpace
    * Q ";" ^ -1
    * SkipSpace
    * Comment ^ -1
    * SkipSpace
    * Q "}"
  local Record = RecordType + RecordVal
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local Operator =
    P "||" *
%    \end{macrocode}
% Don't use |\hspace| instead of |\kern|!
%    \begin{macrocode}
    Lc([[{\PitonStyle{Operator}{\kern0.1em|\kern-0.2em|\kern0.1em}}]])
     + 
    K ( 'Operator' ,
        P "!=" + "<>" + "==" + "<<" + ">>" + "<=" + ">=" + ":=" + "&&" +
        "//" + "**" + ";;" + "->" + "+." + "-." + "*." + "/."
        + S "-~+/*%=<>&@|" )
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local Builtin =
    K ( 'Name.Builtin' , P "incr" + "decr" + "fst" + "snd" + "ref" )
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local Exception =
    K (   'Exception' ,
        P "Division_by_zero" + "End_of_File" + "Failure" + "Invalid_argument" +
        "Match_failure" + "Not_found" + "Out_of_memory" + "Stack_overflow" +
        "Sys_blocked_io" + "Sys_error" + "Undefined_recursive_module" )
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  LPEG_cleaner.ocaml = Compute_LPEG_cleaner ( 'ocaml' , braces )
%    \end{macrocode}
%
% \bigskip
% An argument in the definition of a OCaml function may be of the form
% |(pattern:type)|. |pattern| may be a single identifier but it's not mandatory.
% First instance, it's possible to write in OCaml:
%
% |let head (a::q) = a|
%
% First, we write a pattern (in the LPEG sens!) to match what will be the
% pattern (in the OCaml sens).
%    \begin{macrocode}
  local pattern_part = 
    ( P "(" * balanced_parens * ")" + ( 1 - S ":()" ) + P "::" ) ^ 0 
%    \end{macrocode}
% For the ``type'' part, the LPEG-pattern will merely be |balanced_parens|.
% 
% \bigskip
% We can now write a LPEG |Argument| which catches a argument of function (in
% the definition of the function).
%    \begin{macrocode}
  local Argument =
%    \end{macrocode}
% The following line is for the labels of the labeled arguments. Maybe we will,
% in the future, create a style for those elements.
%    \begin{macrocode}
    (  Q "~" * Identifier * Q ":" * SkipSpace ) ^ -1
    *
%    \end{macrocode}
% Now, the argument itself, either a single identifier, or a construction
% between parentheses
%    \begin{macrocode}
    ( 
        K ( 'Identifier.Internal' , identifier )
      + 
        Q "(" * SkipSpace
        * ( C ( pattern_part ) / ParseAgain ) 
        * SkipSpace
%    \end{macrocode}
% Of course, the specification of type is optional.
%    \begin{macrocode}
       * ( Q ":" * #(1- P"=")
           * K ( 'TypeExpression' , balanced_parens ) * SkipSpace
         ) ^ -1
        * Q ")"
    )
%    \end{macrocode}
%
% \bigskip
% Despite its name, the \textsc{lpeg} |DefFunction| deals also with |let open|
% which opens locally a module.
%    \begin{macrocode}
  local DefFunction =
    K ( 'Keyword.Governing' , "let open" )
    * Space
    * K ( 'Name.Module' , cap_identifier )
    +
    K ( 'Keyword.Governing' , P "let rec" + "let" + "and" )
      * Space
      * K ( 'Name.Function.Internal' , identifier )
      * Space
      * (
%    \end{macrocode}
% We use here the argument |strict| in order to allow a correct analyse of 
% |let x = \uncover<2->{y}| (elsewhere, it's interpreted as a definition of a OCaml
% function). 
%    \begin{macrocode}
          Q "=" * SkipSpace * K ( 'Keyword' , "function" , true )
          +
          Argument * ( SkipSpace * Argument ) ^ 0
          * (
              SkipSpace
              * Q ":" * # ( 1 - P "=" )
              * K ( 'TypeExpression' , ( 1 - P "=" ) ^ 0 )
            ) ^ -1
        )
%    \end{macrocode}
%
% \paragraph{DefModule}
%
%    \begin{macrocode}
  local DefModule =
    K ( 'Keyword.Governing' , "module" ) * Space
    *
      (
            K ( 'Keyword.Governing' , "type" ) * Space
          * K ( 'Name.Type' , cap_identifier )
        +
          K ( 'Name.Module' , cap_identifier ) * SkipSpace
          *
            (
              Q "(" * SkipSpace
                * K ( 'Name.Module' , cap_identifier ) * SkipSpace
                * Q ":" * # ( 1 - P "=" ) * SkipSpace
                * K ( 'Name.Type' , cap_identifier ) * SkipSpace
                *
                  (
                    Q "," * SkipSpace
                      * K ( 'Name.Module' , cap_identifier ) * SkipSpace
                      * Q ":" * # ( 1 - P "=" ) * SkipSpace
                      * K ( 'Name.Type' , cap_identifier ) * SkipSpace
                  ) ^ 0
                * Q ")"
            ) ^ -1
          *
            (
              Q "=" * SkipSpace
              * K ( 'Name.Module' , cap_identifier )  * SkipSpace
              * Q "("
              * K ( 'Name.Module' , cap_identifier ) * SkipSpace
                *
                (
                  Q ","
                  *
                  K ( 'Name.Module' , cap_identifier ) * SkipSpace
                ) ^ 0
              * Q ")"
            ) ^ -1
      )
    +
    K ( 'Keyword.Governing' , P "include" + "open" )
    * Space 
    * K ( 'Name.Module' , cap_identifier )
%    \end{macrocode}
%
% \paragraph{DefType}
%
%    \begin{macrocode}
  local DefType =
    K ( 'Keyword.Governing' , "type" )
    * Space
    * K ( 'TypeExpression' , Q ( 1 - P "=" - P "+=" ) ^ 1 )
    * SkipSpace
    * ( Q "+=" + Q "=" )
    * SkipSpace
    * (
        RecordType
        +
%    \end{macrocode}
% The following lines are a suggestion of Y. Salmon. 
%    \begin{macrocode}
        WithStyle
         (
           'TypeExpression' ,
           (
             (  
               EOL 
               + comment 
               +  Q ( 1 
                      - P ";;"
                      - P "type"
                      - ( ( Space + EOL ) * governing_keyword * EndKeyword )
                    ) 
             ) ^ 0  
             * 
             ( 
               # ( P "type" + ( Space + EOL ) * governing_keyword * EndKeyword )
               + Q ";;"
               + -1 
             ) 
           )
         )
      )
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local prompt =
    Q "utop[" * digit^1 * Q "]> "
  local start_of_line = P(function(subject, position)
  if position == 1 or subject:sub(position - 1, position - 1) == "\r" then
    return position
  end
  return nil
end)
  local Prompt = #start_of_line * K( 'Prompt', prompt )
  local Answer = #start_of_line * (Q "-" + Q "val" * Space * Identifier )
                 * SkipSpace * Q ":" * #(1- P"=") * SkipSpace
                 * (K ( 'TypeExpression' , Q ( 1 - P "=") ^ 1 ) ) * SkipSpace * Q "="
%    \end{macrocode}
% 
% \bigskip
% \paragraph{The main LPEG for the language OCaml}
%
%    \begin{macrocode}
  local Main =
      space ^ 0 * EOL
      + Space
      + Tab
      + Escape + EscapeMath
      + Beamer
      + DetectedCommands
      + TypeParameter
      + String + QuotedString + Char
      + Comment
      + Prompt + Answer 
%    \end{macrocode}
% For the labels (maybe we will write in the future a dedicated LPEG pour those tokens).
%    \begin{macrocode}
      + Q "~" * Identifier * ( Q ":" ) ^ -1
      + Q ":" * # (1 - P ":") * SkipSpace
          * K ( 'TypeExpression' , balanced_parens ) * SkipSpace * Q ")"
      + Exception
      + DefType
      + DefFunction
      + DefModule
      + Record
      + Keyword * EndKeyword
      + OperatorWord * EndKeyword
      + Builtin * EndKeyword
      + DotNotation * EndKeyword
      + Constructor
      + Identifier
      + Punct
      + Delim -- Delim is before Operator for a correct analysis of [| et |]
      + Operator
      + Number
      + Word
%    \end{macrocode}
%
% \bigskip
% % Here, we must not put |local|, of course.
%    \begin{macrocode}
  LPEG1.ocaml = Main ^ 0
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  LPEG2.ocaml =
    Ct (
%    \end{macrocode}
% The following lines are in order to allow, in |\piton| (and not in |{Piton}|),
% judgments of type (such as |f : my_type -> 'a list|) or single expressions of
% type such as |my_type -> 'a list| (in that case, the argument of |\piton|
% \emph{must} begin by a colon).
%    \begin{macrocode}
          (
            (
               P ":"
               +
               (
                 ( K ( 'Name.Module' , cap_identifier ) * Q "." ) ^ -1
                 * Identifier
                 * SkipSpace
                 * Q ":"
               )
            )
              * # ( 1 - S ":=" )
              * SkipSpace
              * K ( 'TypeExpression' , ( 1 - P "\r" ) ^ 0 ) * -1
          )
        +
        (
          ( space ^ 0 * "\r" ) ^ -1
          * Lc [[ \@@_begin_line: ]]
          * LeadingSpace ^ 0
          * ( ( space * Lc [[ \@@_trailing_space: ]] ) ^ 1 * -1 
                + space ^ 0 * EOL 
                + Main 
            ) ^ 0
          * -1
          * Lc [[ \@@_end_line: ]]
        )
      )
%    \end{macrocode}
% 
% \bigskip
% End of the Lua scope for the language OCaml.
%    \begin{macrocode}
end
%    \end{macrocode}
% 
% 
% \bigskip
% \subsection{The language C}
% 
% We open a Lua local scope for the language C (of course, there will be also
% global definitions).
%    \begin{macrocode}
--c C c++ C++
do 
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local Delim = Q ( S "{[()]}" )
%    \end{macrocode}
%
%    \begin{macrocode}
  local Punct = Q ( S ",:;!" )
%    \end{macrocode}
%
% \bigskip
% Some strings of length 2 are explicit because we want the corresponding
% ligatures available in some fonts such as \emph{Fira Code} to be active.
%    \begin{macrocode}
  local identifier = letter * alphanum ^ 0

  local Operator = 
    K ( 'Operator' ,
        P "!=" + "==" + "<<" + ">>" + "<=" + ">=" + "||" + "&&" 
          + S "-~+/*%=<>&.@|!" )

  local Keyword = 
    K ( 'Keyword' ,
        P "alignas" + "asm" + "auto" + "break" + "case" + "catch" + "class" +
        "const" + "constexpr" + "continue" + "decltype" + "do" + "else" + "enum" +
        "extern" + "for" + "goto" + "if" + "nexcept" + "private" + "public" +
        "register" + "restricted" + "return" + "static" + "static_assert" +
        "struct" + "switch" + "thread_local" + "throw" + "try" + "typedef" +
        "union" + "using" + "virtual" + "volatile" + "while" 
      )
    + K ( 'Keyword.Constant' , P "default" + "false" + "NULL" + "nullptr" + "true" ) 

  local Builtin = 
    K ( 'Name.Builtin' ,
        P "alignof" + "malloc" + "printf" + "scanf" + "sizeof" )

  local Type = 
    K ( 'Name.Type' ,
        P "bool" + "char" + "char16_t" + "char32_t" + "double" + "float" +
        "int8_t" + "int16_t" + "int32_t" + "int64_t" + "uint8_t" + "uint16_t" +
        "uint32_t" + "uint64_t" + "int" + "long" + "short" + "signed" + "unsigned" +
        "void" + "wchar_t" ) * Q "*" ^ 0 

  local DefFunction = 
    Type 
    * Space 
    * Q "*" ^ -1
    * K ( 'Name.Function.Internal' , identifier ) 
    * SkipSpace 
    * # P "("
%    \end{macrocode}
% We remind that the marker |#| of \textsc{lpeg} specifies that the pattern will be
% detected but won't consume any character.
%
% \bigskip
% The following \textsc{lpeg} |DefClass| will be used to detect the definition of a
% new class (the name of that new class will be formatted with the \pkg{piton}
% style |Name.Class|). 
%
% \smallskip
% Example:\enskip \piton{class myclass:}
%    \begin{macrocode}
  local DefClass = 
    K ( 'Keyword' , "class" ) * Space * K ( 'Name.Class' , identifier ) 
%    \end{macrocode}
% 
% If the word |class| is not followed by a identifier, it will be caught as
% keyword by the \textsc{lpeg} |Keyword| (useful if we want to type a
% list of keywords).
%
% \bigskip
%    \begin{macrocode}
  local Character =
    K ( 'String.Short' ,
        P [['\'']] + P "'" * ( 1 - P "'" ) ^ 0 * P "'" )  
%    \end{macrocode}
% 
% \bigskip
% \paragraph{The strings of C}
%
%    \begin{macrocode}
  String = 
    WithStyle ( 'String.Long.Internal' ,
        Q "\"" 
        * ( SpaceInString 
            + K ( 'String.Interpol' , 
                  "%" * ( S "difcspxXou" + "ld" + "li" + "hd" + "hi" )
                ) 
            + Q ( ( P "\\\"" + 1 - S " \"" ) ^ 1 ) 
          ) ^ 0 
        * Q "\""
      )
%    \end{macrocode}
% 
% \bigskip
% \paragraph{Beamer}
%
% \bigskip
% The argument of |Compute_braces| must be a pattern \emph{which does no
% catching} corresponding to the strings of the language.
%    \begin{macrocode}
  local braces = Compute_braces ( "\"" * ( 1 - S "\"" ) ^ 0 * "\"" ) 
  if piton.beamer then Beamer = Compute_Beamer ( 'c' , braces ) end
%    \end{macrocode}
%
%    \begin{macrocode}
  DetectedCommands = 
    Compute_DetectedCommands ( 'c' , braces ) 
    + Compute_RawDetectedCommands ( 'c' , braces )
%    \end{macrocode}
%
%    \begin{macrocode}
  LPEG_cleaner.c = Compute_LPEG_cleaner ( 'c' , braces ) 
%    \end{macrocode}
% 
% \bigskip
% \paragraph{The directives of the preprocessor}
%
%    \begin{macrocode}
  local Preproc = K ( 'Preproc' , "#" * ( 1 - P "\r" ) ^ 0  ) * ( EOL + -1 )
%    \end{macrocode}
% 
%
% \bigskip
% \paragraph{The comments in the C listings}
%
% We define different \textsc{lpeg} dealing with comments in the C listings.
%    \begin{macrocode}
  local Comment = 
    WithStyle ( 'Comment.Internal' ,
       Q "//" * ( CommentMath + Q ( ( 1 - S "$\r" ) ^ 1 ) ) ^ 0 ) -- $
              * ( EOL + -1 )

  local LongComment = 
    WithStyle ( 'Comment.Internal' , 
                 Q "/*" 
                 * ( CommentMath + Q ( ( 1 - P "*/" - S "$\r" ) ^ 1 ) + EOL ) ^ 0 
                 * Q "*/" 
              ) -- $
%    \end{macrocode}
%
%
%
% 
% \bigskip
% \paragraph{The main LPEG for the language C}
%
%    \begin{macrocode}
  local EndKeyword 
    = Space + Punct + Delim + EOL + Beamer + DetectedCommands + Escape +
    EscapeMath  + -1 
%    \end{macrocode}
%
% First, the main loop :
%    \begin{macrocode}
  local Main = 
       space ^ 0 * EOL
       + Space 
       + Tab
       + Escape + EscapeMath 
       + CommentLaTeX
       + Beamer
       + DetectedCommands
       + Preproc
       + Comment + LongComment
       + Delim
       + Operator
       + Character
       + String
       + Punct
       + DefFunction
       + DefClass 
       + Type * ( Q "*" ^ -1 + EndKeyword ) 
       + Keyword * EndKeyword
       + Builtin * EndKeyword
       + Identifier 
       + Number
       + Word
%    \end{macrocode}
%
% \bigskip
% Here, we must not put |local|, of course.
%    \begin{macrocode}
  LPEG1.c = Main ^ 0 
%    \end{macrocode}
%
% \bigskip
% We recall that each line in the C code to parse will be sent back to
% LaTeX between a pair |\@@_begin_line:| -- |\@@_end_line:|\footnote{Remember
% that the \texttt{\textbackslash @@\_end\_line:} must be explicit because it
% will be used as marker in order to delimit the argument of the command
% \texttt{\textbackslash @@\_begin\_line:}}.
%    \begin{macrocode}
  LPEG2.c = 
    Ct (
         ( space ^ 0 * P "\r" ) ^ -1 
         * Lc [[ \@@_begin_line: ]]
         * LeadingSpace ^ 0 
         * ( space ^ 1 * -1 + space ^ 0 * EOL + Main ) ^ 0 
         * -1 
         * Lc [[ \@@_end_line: ]] 
       )
%    \end{macrocode}
%
% \bigskip
% End of the Lua scope for the language C.
%    \begin{macrocode}
end
%    \end{macrocode}
%
% \bigskip
% \subsection{The language SQL}
% 
% We open a Lua local scope for the language SQL (of course, there will be also
% global definitions).
%    \begin{macrocode}
--sql SQL
do 
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local LuaKeyword
  function LuaKeyword ( name ) return 
    Lc [[ {\PitonStyle{Keyword}{ ]] 
    * Q ( Cmt ( 
                C ( letter * alphanum ^ 0 ) , 
                function ( _ , _ , a ) return a : upper ( ) == name end 
              ) 
        ) 
    * Lc "}}" 
  end 
%    \end{macrocode}
%
% \bigskip
% In the identifiers, we will be able to catch those contening spaces, that is
% to say like |"last name"|. 
%    \begin{macrocode}
  local identifier = 
    letter * ( alphanum + "-" ) ^ 0 
    + P '"' * ( ( 1 - P '"' ) ^ 1 ) * '"' 
%    \end{macrocode}
% 
%    \begin{macrocode}
  local Operator = 
    K ( 'Operator' , P "=" + "!=" + "<>" + ">=" + ">" + "<=" + "<"  + S "*+/" )
%    \end{macrocode}
%
% In SQL, the keywords are case-insensitive. That's why we have a little
% complication. We will catch the keywords with the identifiers and, then,
% distinguish the keywords with a Lua function. However, some keywords will be
% caught in special LPEG because we want to detect the names of the SQL tables.
% 
% \bigskip
% The following function converts a comma-separated list in a ``set'', that is
% to say a Lua table with a fast way to test whether a string belongs to that
% set (eventually, the indexation of the components of the table is no longer
% done by integers but by the strings themselves). 
%    \begin{macrocode}
  local Set
  function Set ( list )
    local set = { }
    for _ , l in ipairs ( list ) do set[l] = true end
    return set
  end
%    \end{macrocode}
% 
% \bigskip
% We now use the previous function |Set| to creates the ``sets'' |set_keywords|
% and |set_builtin|. That list of keywords comes from
% \url{https://sqlite.org/lang_keywords.html}.
%    \begin{macrocode}
  local set_keywords = Set
   { 
     "ABORT", "ACTION", "ADD", "AFTER", "ALL", "ALTER", "ALWAYS", "ANALYZE",
     "AND", "AS", "ASC", "ATTACH", "AUTOINCREMENT", "BEFORE", "BEGIN", "BETWEEN",
     "BY", "CASCADE", "CASE", "CAST", "CHECK", "COLLATE", "COLUMN", "COMMIT",
     "CONFLICT", "CONSTRAINT", "CREATE", "CROSS", "CURRENT", "CURRENT_DATE",
     "CURRENT_TIME", "CURRENT_TIMESTAMP", "DATABASE", "DEFAULT", "DEFERRABLE",
     "DEFERRED", "DELETE", "DESC", "DETACH", "DISTINCT", "DO", "DROP", "EACH",
     "ELSE", "END", "ESCAPE", "EXCEPT", "EXCLUDE", "EXCLUSIVE", "EXISTS",
     "EXPLAIN", "FAIL", "FILTER", "FIRST", "FOLLOWING", "FOR", "FOREIGN", "FROM",
     "FULL", "GENERATED", "GLOB", "GROUP", "GROUPS", "HAVING", "IF", "IGNORE",
     "IMMEDIATE", "IN", "INDEX", "INDEXED", "INITIALLY", "INNER", "INSERT",
     "INSTEAD", "INTERSECT", "INTO", "IS", "ISNULL", "JOIN", "KEY", "LAST",
     "LEFT", "LIKE", "LIMIT", "MATCH", "MATERIALIZED", "NATURAL", "NO", "NOT",
     "NOTHING", "NOTNULL", "NULL", "NULLS", "OF", "OFFSET", "ON", "OR", "ORDER",
     "OTHERS", "OUTER", "OVER", "PARTITION", "PLAN", "PRAGMA", "PRECEDING",
     "PRIMARY", "QUERY", "RAISE", "RANGE", "RECURSIVE", "REFERENCES", "REGEXP",
     "REINDEX", "RELEASE", "RENAME", "REPLACE", "RESTRICT", "RETURNING", "RIGHT",
     "ROLLBACK", "ROW", "ROWS", "SAVEPOINT", "SELECT", "SET", "TABLE", "TEMP",
     "TEMPORARY", "THEN", "TIES", "TO", "TRANSACTION", "TRIGGER", "UNBOUNDED",
     "UNION", "UNIQUE", "UPDATE", "USING", "VACUUM", "VALUES", "VIEW", "VIRTUAL",
     "WHEN", "WHERE", "WINDOW", "WITH", "WITHOUT"
   }
%    \end{macrocode}
% 
%    \begin{macrocode}
  local set_builtins = Set
   { 
     "AVG" , "COUNT" , "CHAR_LENGTH" , "CONCAT" , "CURDATE" , "CURRENT_DATE" ,
     "DATE_FORMAT" , "DAY" , "LOWER" , "LTRIM" , "MAX" , "MIN" , "MONTH" , "NOW" ,
     "RANK" , "ROUND" , "RTRIM" , "SUBSTRING" , "SUM" , "UPPER" , "YEAR" 
   }
%    \end{macrocode}
%
% The \textsc{lpeg} |Identifier| will catch the identifiers of the fields  
% but also the keywords and the built-in functions of SQL. If will \emph{not}
% catch the names of the SQL tables.
%    \begin{macrocode}
  local Identifier = 
    C ( identifier ) /
    ( 
      function ( s ) 
          if set_keywords [ s : upper ( ) ] then return
%    \end{macrocode}
% Remind that, in Lua, it's possible to return \emph{several} values. 
%    \begin{macrocode}
            { [[{\PitonStyle{Keyword}{]] } ,
            { luatexbase.catcodetables.other , s } ,
            { "}}" }
          else 
            if set_builtins [ s : upper ( ) ] then return
              { [[{\PitonStyle{Name.Builtin}{]] } ,
              { luatexbase.catcodetables.other , s } ,
              { "}}" }
            else return
              { [[{\PitonStyle{Name.Field}{]] } ,
              { luatexbase.catcodetables.other , s } ,
              { "}}" }
            end
          end 
      end
    ) 
%    \end{macrocode}
% 
% \bigskip
% \paragraph{The strings of SQL}
%
%    \begin{macrocode}
  local String = K ( 'String.Long.Internal' , "'" * ( 1 - P "'" ) ^ 1 * "'" ) 
%    \end{macrocode}
% 
% \bigskip
% \paragraph{Beamer}
%
% \bigskip
% The argument of |Compute_braces| must be a pattern \emph{which does no
% catching} corresponding to the strings of the language.
%
%    \begin{macrocode}
  local braces = Compute_braces ( "'" * ( 1 - P "'" ) ^ 1 * "'" ) 
  if piton.beamer then Beamer = Compute_Beamer ( 'sql' , braces ) end
%    \end{macrocode}
% 
%    \begin{macrocode}
  DetectedCommands = 
    Compute_DetectedCommands ( 'sql' , braces ) 
    + Compute_RawDetectedCommands ( 'sql' , braces )
%    \end{macrocode}
%
%    \begin{macrocode}
  LPEG_cleaner.sql = Compute_LPEG_cleaner ( 'sql' , braces ) 
%    \end{macrocode}
%
% 
%
% \bigskip
% \paragraph{The comments in the SQL listings}
%
% We define different \textsc{lpeg} dealing with comments in the SQL listings.
%    \begin{macrocode}
  local Comment = 
    WithStyle ( 'Comment.Internal' ,
       Q "--"   -- syntax of SQL92
       * ( CommentMath + Q ( ( 1 - S "$\r" ) ^ 1 ) ) ^ 0 ) -- $
    * ( EOL + -1 )

  local LongComment = 
    WithStyle ( 'Comment.Internal' , 
                 Q "/*" 
                 * ( CommentMath + Q ( ( 1 - P "*/" - S "$\r" ) ^ 1 ) + EOL ) ^ 0 
                 * Q "*/" 
              ) -- $
%    \end{macrocode}
%
%
% 
% \bigskip
% \paragraph{The main LPEG for the language SQL}
%
%    \begin{macrocode}
  local EndKeyword 
    = Space + Punct + Delim + EOL + Beamer + DetectedCommands + Escape + 
      EscapeMath + -1 
%    \end{macrocode}
%
%    \begin{macrocode}
  local TableField = 
         K ( 'Name.Table' , identifier ) 
       * Q "." 
       * ( DetectedCommands + ( K ( 'Name.Field' , identifier ) ) ^ 0 )

  local OneField = 
    ( 
      Q ( "(" * ( 1 - P ")" ) ^ 0 * ")" )
      + 
          K ( 'Name.Table' , identifier ) 
        * Q "." 
        * K ( 'Name.Field' , identifier ) 
      + 
      K ( 'Name.Field' , identifier ) 
    )
    * ( 
        Space * LuaKeyword "AS" * Space * K ( 'Name.Field' , identifier ) 
      ) ^ -1
    * ( Space * ( LuaKeyword "ASC" + LuaKeyword "DESC" ) ) ^ -1

  local OneTable = 
       K ( 'Name.Table' , identifier ) 
     * ( 
         Space 
         * LuaKeyword "AS"  
         * Space 
         * K ( 'Name.Table' , identifier ) 
       ) ^ -1 

  local WeCatchTableNames = 
       LuaKeyword "FROM" 
     * ( Space + EOL ) 
     * OneTable * ( SkipSpace * Q "," * SkipSpace * OneTable ) ^ 0 
    + ( 
        LuaKeyword "JOIN" + LuaKeyword "INTO" + LuaKeyword "UPDATE" 
        + LuaKeyword "TABLE" 
      ) 
      * ( Space + EOL ) * OneTable 
%    \end{macrocode}
% 
%    \begin{macrocode}
  local EndKeyword 
    = Space + Punct + Delim + EOL + Beamer 
        + DetectedCommands + Escape + EscapeMath + -1 
%    \end{macrocode}
%
%
% First, the main loop :
%    \begin{macrocode}
  local Main = 
       space ^ 0 * EOL
       + Space 
       + Tab
       + Escape + EscapeMath 
       + CommentLaTeX
       + Beamer
       + DetectedCommands
       + Comment + LongComment
       + Delim
       + Operator
       + String
       + Punct
       + WeCatchTableNames
       + ( TableField + Identifier ) * ( Space + Operator + Punct + Delim + EOL + -1 )  
       + Number
       + Word
%    \end{macrocode}
%
% \bigskip
% Here, we must not put |local|, of course.
%    \begin{macrocode}
  LPEG1.sql = Main ^ 0 
%    \end{macrocode}
%
% \bigskip
% We recall that each line in the code to parse will be sent back to
% LaTeX between a pair |\@@_begin_line:| -- |\@@_end_line:|\footnote{Remember
% that the \texttt{\textbackslash @@\_end\_line:} must be explicit because it
% will be used as marker in order to delimit the argument of the command
% \texttt{\textbackslash @@\_begin\_line:}}.
%    \begin{macrocode}
  LPEG2.sql =
    Ct (
         ( space ^ 0 * "\r" ) ^ -1 
         * Lc [[ \@@_begin_line: ]]
         * LeadingSpace ^ 0 
         * ( space ^ 1 * -1 + space ^ 0 * EOL + Main ) ^ 0 
         * -1 
         * Lc [[ \@@_end_line: ]]
       )
%    \end{macrocode}
%
% \bigskip
% End of the Lua scope for the language SQL.
%    \begin{macrocode}
end
%    \end{macrocode}
% 
% \subsection{The language ``Minimal''}
% 
% We open a Lua local scope for the language ``Minimal'' (of course, there
% will be also global definitions).
%    \begin{macrocode}
--minimal Minimal
do 
%    \end{macrocode}
%
%    \begin{macrocode}
  local Punct = Q ( S ",:;!\\" )

  local Comment = 
    WithStyle ( 'Comment.Internal' ,
                Q "#" 
                * ( CommentMath + Q ( ( 1 - S "$\r" ) ^ 1 ) ) ^ 0 -- $
              )
       * ( EOL + -1 )

  local String = 
    WithStyle ( 'String.Short.Internal' ,
                Q "\"" 
                * ( SpaceInString 
                    + Q ( ( P [[\"]] + 1 - S " \"" ) ^ 1 ) 
                  ) ^ 0 
                * Q "\""
              )
%    \end{macrocode}
%
% \bigskip
% The argument of |Compute_braces| must be a pattern \emph{which does no
% catching} corresponding to the strings of the language.
%    \begin{macrocode}
  local braces = Compute_braces ( P "\"" * ( P "\\\"" + 1 - P "\"" ) ^ 1 * "\"" ) 

  if piton.beamer then Beamer = Compute_Beamer ( 'minimal' , braces ) end

  DetectedCommands = 
    Compute_DetectedCommands ( 'minimal' , braces ) 
    + Compute_RawDetectedCommands ( 'minimal' , braces )

  LPEG_cleaner.minimal = Compute_LPEG_cleaner ( 'minimal' , braces ) 

  local identifier = letter * alphanum ^ 0

  local Identifier = K ( 'Identifier.Internal' , identifier )

  local Delim = Q ( S "{[()]}" )

  local Main = 
       space ^ 0 * EOL
       + Space 
       + Tab
       + Escape + EscapeMath 
       + CommentLaTeX
       + Beamer
       + DetectedCommands
       + Comment
       + Delim
       + String
       + Punct
       + Identifier 
       + Number
       + Word
%    \end{macrocode}
%
% \bigskip
% Here, we must not put |local|, of course.
%    \begin{macrocode}
  LPEG1.minimal = Main ^ 0

  LPEG2.minimal = 
    Ct (
         ( space ^ 0 * "\r" ) ^ -1 
         * Lc [[ \@@_begin_line: ]]
         * LeadingSpace ^ 0 
         * ( space ^ 1 * -1 + space ^ 0 * EOL + Main ) ^ 0 
         * -1 
         * Lc [[ \@@_end_line: ]]
       )
%    \end{macrocode}
% 
%
% \bigskip
% End of the Lua scope for the language ``Minimal''.
%    \begin{macrocode}
end
%    \end{macrocode}
%
% \subsection{The language ``Verbatim''}
% 
% We open a Lua local scope for the language ``Verbatim'' (of course, there
% will be also global definitions).
%    \begin{macrocode}
--verbatim Verbatim
do 
%    \end{macrocode}

% \bigskip
% Here, we don't use |braces| as done with the other languages because we don't
% have have to take into account the strings (there is no string in the langage
% ``Verbatim''). 
%    \begin{macrocode}
  local braces = 
      P { "E" ,
           E = ( "{" * V "E" * "}" + ( 1 - S "{}" ) ) ^ 0 
        }

  if piton.beamer then Beamer = Compute_Beamer ( 'verbatim' , braces ) end

  DetectedCommands = 
    Compute_DetectedCommands ( 'verbatim' , braces ) 
    + Compute_RawDetectedCommands ( 'verbatim' , braces )

  LPEG_cleaner.verbatim = Compute_LPEG_cleaner ( 'verbatim' , braces ) 
%    \end{macrocode}
% 
% Now, you will construct the LPEG Word.
%    \begin{macrocode}
  local lpeg_central = 1 - S " \\\r"
  if piton.begin_escape then 
    lpeg_central = lpeg_central - piton.begin_escape 
  end
  if piton.begin_escape_math then 
    lpeg_central = lpeg_central - piton.begin_escape_math 
  end
  local Word = Q ( lpeg_central ^ 1 ) 

  local Main = 
       space ^ 0 * EOL
       + Space 
       + Tab
       + Escape + EscapeMath 
       + Beamer
       + DetectedCommands
       + Q [[\]]
       + Word
%    \end{macrocode}
%
% \bigskip
% Here, we must not put |local|, of course.
%    \begin{macrocode}
  LPEG1.verbatim = Main ^ 0

  LPEG2.verbatim = 
    Ct (
         ( space ^ 0 * "\r" ) ^ -1 
         * Lc [[ \@@_begin_line: ]]
         * LeadingSpace ^ 0 
         * ( space ^ 1 * -1 + space ^ 0 * EOL + Main ) ^ 0 
         * -1 
         * Lc [[ \@@_end_line: ]]
       )
%    \end{macrocode}
% 
%
% \bigskip
% End of the Lua scope for the language ``|verbatim|''.
%    \begin{macrocode}
end
%    \end{macrocode}
%
%
% \subsection{The language expl}
% 
% We open a Lua local scope for the language |expl| of LaTeX3 (of course, there
% will be also global definitions).
%    \begin{macrocode}
--EXPL expl
do 
%    \end{macrocode}
%
%    \begin{macrocode}
  local Comment = 
    WithStyle 
     ( 'Comment.Internal' ,
       Q "%" * ( CommentMath + Q ( ( 1 - S "$\r" ) ^ 1 ) ) ^ 0  -- $
     ) 
    * ( EOL + -1 )
%    \end{macrocode}
%
% \medskip
% First, we begin with a special function to analyse the ``keywords'', that is to
% say the control sequences beginning by ``|\|''.
%    \begin{macrocode}
  local analyze_cs
  function analyze_cs ( s )
    local i = s : find ( ":" )
    if i then
%    \end{macrocode}
% First, the case of what might be called a ``function'' in |expl|, for instance,
% |\tl_set:Nn| or |\int_compare:nNnTF|.
%    \begin{macrocode}
      local name = s : sub ( 2 , i - 1 )
      local parts = name : explode ( "_" ) 
      local module = parts[1]
      if module == "" then module = parts[3] end
%    \end{macrocode}
% Remind that, in Lua, we can return \emph{several} values.
%    \begin{macrocode}
      return
       { [[{\OptionalLocalPitonStyle{Module.]] .. module .. "}{" } ,
       { luatexbase.catcodetables.other , s } ,
       { "}}" }
    else
%    \end{macrocode}
%    \begin{macrocode}
      local p = s : sub ( 1 , 3 )
      if p == [[\l_]] or p == [[\g_]] or p == [[\c_]] then
%    \end{macrocode}
% The case of what might be called a ``variable'', for instance,
% |\l_tmpa_int| or |\g__module_text_tl|.
%    \begin{macrocode}
        local scope = s : sub(2,2)
        local parts = s : explode ( "_" )
        local module = parts[2]
        if module == "" then module = parts[3] end 
        local type = parts[#parts]
        return 
          { [[{\OptionalLocalPitonStyle{Scope.]] .. scope .. "}{" } ,
          { [[{\OptionalLocalPitonStyle{Module.]] .. module .. "}{" } ,
          { [[{\OptionalLocalPitonStyle{Type.]] .. type .. "}{" } ,
          { luatexbase.catcodetables.other , s } ,
          { "}}}}}}" }
      else
%    \end{macrocode}
% We have a control sequence which is neither a ``function'' neither a ``variable''
% of |expl|. It's a control sequence of standard LaTeX and we don't format it.
%    \begin{macrocode}
        return { luatexbase.catcodetables.other , s }
      end
    end 
  end 
%    \end{macrocode}
%
% \bigskip
% Here, we don't use |braces| as done with the other languages because we don't
% have have to take into account the strings (there is no string in the langage
% |expl|). 
%    \begin{macrocode}
  local braces = 
      P { "E" ,
           E = ( "{" * V "E" * "}" + ( 1 - S "{}" ) ) ^ 0 
        }

  if piton.beamer then Beamer = Compute_Beamer ( 'expl' , braces ) end

  DetectedCommands = 
    Compute_DetectedCommands ( 'expl' , braces ) 
    + Compute_RawDetectedCommands ( 'expl' , braces )

  LPEG_cleaner.expl = Compute_LPEG_cleaner ( 'expl' , braces ) 
%    \end{macrocode}
%    \begin{macrocode}
  local control_sequence = P "\\" * ( R "Az" + "_" + ":" + "@" ) ^ 1
  local ControlSequence = C ( control_sequence ) / analyze_cs
%    \end{macrocode}
%
%    \begin{macrocode}
  local def_function
   = P [[\cs_]]
     * ( P "set" + "new")
     * ( P "_protected" ) ^ -1  
     * P ":N"  * ( P "p" ) ^ -1 * "n"
%    \end{macrocode}
%
%    \begin{macrocode}
  local DefFunction =
    C ( def_function ) / analyze_cs
    * Space
    * Lc ( [[ {\PitonStyle{Name.Function}{ ]] ) 
    * ControlSequence -- Q ( ControlSequence ) ?
    * Lc "}}"
%    \end{macrocode}
%
%    \begin{macrocode}
  local Word = Q ( ( 1 - S " \r" ) ^ 1 ) 

  local Main = 
       space ^ 0 * EOL
       + Space 
       + Tab
       + Escape + EscapeMath 
       + Beamer
       + Comment       
       + DetectedCommands
       + DefFunction
       + ControlSequence
       + Word 
%    \end{macrocode}
%
% \bigskip
% Here, we must not put |local|, of course.
%    \begin{macrocode}
  LPEG1.expl = Main ^ 0

  LPEG2.expl = 
    Ct (
         ( space ^ 0 * "\r" ) ^ -1 
         * Lc [[ \@@_begin_line: ]]
         * LeadingSpace ^ 0 
         * ( space ^ 1 * -1 + space ^ 0 * EOL + Main ) ^ 0 
         * -1 
         * Lc [[ \@@_end_line: ]]
       )
%    \end{macrocode}
% 
%
% \bigskip
% End of the Lua scope for the language |expl| of LaTeX3.
%    \begin{macrocode}
end
%    \end{macrocode}
%
%
% \bigskip
% \subsection{The function Parse}
%
% \medskip
% The function |Parse| is the main function of the package \pkg{piton}. It
% parses its argument and sends back to LaTeX the code with interlaced
% formatting LaTeX instructions. In fact, everything is done by the
% \textsc{lpeg} corresponding to the considered language (|LPEG2[language]|)
% which returns as capture a Lua table containing data to send to LaTeX.
% 
% \bigskip
%    \begin{macrocode}
function piton.Parse ( language , code )
%    \end{macrocode}
% The variable |piton.language| will be used by the function |ParseAgain|.
%    \begin{macrocode}
  piton.language = language
  local t = LPEG2[language] : match ( code ) 
  if not t then 
    sprintL3 [[ \@@_error_or_warning:n { SyntaxError } ]] 
    return -- to exit in force the function
  end
  local left_stack = {}
  local right_stack = {}
  for _ , one_item in ipairs ( t ) do
    if one_item == "EOL" then
      for i = #right_stack, 1, -1 do
        tex.sprint ( right_stack[i] )
      end
%    \end{macrocode}
% We remind that the |\@@_end_line:| must be explicit since it's the marker
% of end of the command |\@@_begin_line:|.
%    \begin{macrocode}
      sprintL3 ( [[ \@@_end_line: \@@_par: \@@_begin_line: ]] ) 
      tex.sprint ( table.concat ( left_stack ) )
    else
%    \end{macrocode}
%
% Here is an example of an item beginning with |"Open"|.
%
% |{ "Open" , "\begin{uncoverenv}<2>" , "\end{uncoverenv}" }|
%
% In order to deal with the ends of lines, we have to close the environment
% (|{uncoverenv}| in this example) at the end of each line and reopen it at the
% beginning of the new line. That's why we use two Lua stacks, called
% |left_stack| and |right_stack|. |left_stack| will be for the elements like
% |\begin{uncoverenv}<2>| and |right_stack| will be for the elements like
% |\end{uncoverenv}|. 
%    \begin{macrocode}
      if one_item[1] == "Open" then
        tex.sprint ( one_item[2] )
        table.insert ( left_stack , one_item[2] )
        table.insert ( right_stack , one_item[3] )
      else 
        if one_item[1] == "Close" then
          tex.sprint ( right_stack[#right_stack] )
          left_stack[#left_stack] = nil
          right_stack[#right_stack] = nil
        else 
          tex.tprint ( one_item )  
        end 
      end 
    end 
  end 
end
%    \end{macrocode}
%
% \bigskip
% There is the problem of the conventions of end of lines (|\n| in Unix and
% Linux but |\r\n| in Windows). The function |my_file_lines| will read a file
% line by line after replacement of the potential |\r\n| by |\n| (that means that
% we go the convention \textsc{unix}).
%    \begin{macrocode}
local my_file_lines
function my_file_lines ( filename )
    local f = io.open ( filename , 'rb' )
    local s = f : read ( '*a' )
    f : close ( )
%    \end{macrocode}
% À la fin, on doit bien mettre |(.-)| et pas |(.*)|.
%    \begin{macrocode}
    return ( s .. '\n' ) : gsub( '\r\n?' , '\n') : gmatch ( '(.-)\n' ) 
end
%    \end{macrocode}
% Recall that, in Lua, |gmatch| returns an \emph{iterator}.
% 
%
% \bigskip
%    \begin{macrocode}
function piton.ReadFile ( name , first_line , last_line )
  local s = ''
  local i = 0 
  for line in my_file_lines ( name ) do 
    i = i + 1 
    if i >= first_line then 
      s = s .. '\r' .. line 
    end
    if i >= last_line then break end 
  end
%    \end{macrocode}
%
% \bigskip
% We extract the BOM of utf-8, if present.
%    \begin{macrocode}
  if s : sub ( 1 , 4 ) == string.char ( 13 , 239 , 187 , 191 ) then
    s = s : sub ( 5 , -1 )  
  end
%    \end{macrocode}
% 
%    \begin{macrocode}
  sprintL3 ( [[ \tl_set:Nn \l_@@_listing_tl { ]]) 
  tex.sprint ( luatexbase.catcodetables.other , s ) 
  sprintL3 ( "}" ) 
end
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
function piton.RetrieveGobbleParse ( lang , n , splittable , code )
  local s 
  s = ( ( P " " ^ 0 * "\r" ) ^ -1 * C ( P ( 1 ) ^ 0 ) * -1 ) : match ( code )  
  piton.GobbleParse ( lang , n , splittable , s )
end 
%    \end{macrocode}
% 
% \bigskip
% \subsection{Two variants of  the function Parse with integrated preprocessors}
%
% The following command will be used by the user command |\piton|.
% For that command, we have to undo the duplication of the symbols |#|.
%    \begin{macrocode}
function piton.ParseBis ( lang , code )
  return piton.Parse ( lang , code : gsub ( '##' , '#' ) )
end
%    \end{macrocode}
% Of course, |gsub| spans the string only once for the substitutions, which
% means that |####| will be replaced by |##| as expected and not by |#|.
% 
% \bigskip
% The following command will be used when we have to parse some small chunks of
% code that have yet been parsed. They are re-scanned by LaTeX because it has
% been required by |\@@_piton:n| in the \pkg{piton} style of the syntaxic
% element. In that case, you have to remove the potential \verb|\@@_breakable_space:|
% that have been inserted when the key |break-lines| is in force.
%    \begin{macrocode}
function piton.ParseTer ( lang , code )
%    \end{macrocode}
% Be careful: we have to write |[[\@@_breakable_space: ]]| with a space after
% the name of the LaTeX command |\@@_breakable_space:|.
%    \begin{macrocode}
  return piton.Parse 
          ( 
            lang , 
            code : gsub ( [[\@@_breakable_space: ]] , ' ' )
          )
end
%    \end{macrocode}
% 
%
% \bigskip
% \subsection{Preprocessors of the function Parse for gobble}
%
% We deal now with preprocessors of the function |Parse| which are needed when
% the ``gobble mechanism'' is used.
% 
% 
% \bigskip
% The following \textsc{lpeg} returns as capture the minimal number of spaces at
% the beginning of the lines of code. 
%    \begin{macrocode}
local AutoGobbleLPEG =
      (  (
           P " " ^ 0 * "\r"
           +
           Ct ( C " " ^ 0 ) / table.getn
           * ( 1 - P " " ) * ( 1 - P "\r" ) ^ 0 * "\r"
         ) ^ 0
         * ( Ct ( C " " ^ 0 ) / table.getn
              * ( 1 - P " " ) * ( 1 - P "\r" ) ^ 0 ) ^ -1 
       ) / math.min
%    \end{macrocode}
%
% \bigskip
% The following \textsc{lpeg} is similar but works with the tabulations.
%    \begin{macrocode}
local TabsAutoGobbleLPEG =
       (
         (
           P "\t" ^ 0 * "\r"
           +
           Ct ( C "\t" ^ 0 ) / table.getn
           * ( 1 - P "\t" ) * ( 1 - P "\r" ) ^ 0 * "\r"
         ) ^ 0
         * ( Ct ( C "\t" ^ 0 ) / table.getn
             * ( 1 - P "\t" ) * ( 1 - P "\r" ) ^ 0 ) ^ -1 
       ) / math.min
%    \end{macrocode}
%
% \bigskip
% The following \textsc{lpeg} returns as capture the number of spaces at the
% last line, that is to say before the |\end{Piton}| (and usually it's also the
% number of spaces before the corresponding |\begin{Piton}| because that's the
% traditional way to indent in LaTeX). 
%    \begin{macrocode}
local EnvGobbleLPEG =
      ( ( 1 - P "\r" ) ^ 0 * "\r" ) ^ 0
    * Ct ( C " " ^ 0 * -1 ) / table.getn 
%    \end{macrocode}
%
%
% \bigskip
% The function |gobble| gobbles $n$ characters on the left of the code. The
% negative values of $n$ have special significations.
%    \begin{macrocode}
function piton.Gobble ( n , code )
  if n == 0 then return 
    code
  else 
    if n == -1 then 
      n = AutoGobbleLPEG : match ( code )
%    \end{macrocode}
% for the case of an empty environment (only blank lines)
%    \begin{macrocode}
      if tonumber(n) then else n = 0 end
    else 
      if n == -2 then 
        n = EnvGobbleLPEG : match ( code )
      else 
        if n == -3 then 
          n = TabsAutoGobbleLPEG : match ( code )
          if tonumber(n) then else n = 0 end
        end
      end
    end
%    \end{macrocode}
% We have a second test |if n == 0| because, even if the key like
% |auto-gobble| is in force, it's possible that, in fact, there is no space to
% gobble... 
%    \begin{macrocode}
    if n == 0 then return 
      code
    else return 
%    \end{macrocode}
% We will now use a \textsc{lpeg} that we have to compute dynamically because it
% depends on the value of~$n$.
%    \begin{macrocode}
      ( Ct ( 
             ( 1 - P "\r" ) ^ (-n) * C ( ( 1 - P "\r" ) ^ 0 ) 
               * ( C "\r" * ( 1 - P "\r" ) ^ (-n) * C ( ( 1 - P "\r" ) ^ 0 )
           ) ^ 0 ) 
        / table.concat 
      ) : match ( code ) 
    end 
  end
end
%    \end{macrocode}
%
% 
%
% \bigskip
% In the following code, |n| is the value of |\l_@@_gobble_int|.
%
% |splittable| is the value of |\l_@@_splittable_int|.
%    \begin{macrocode}
function piton.GobbleParse ( lang , n , splittable , code )
  piton.ComputeLinesStatus ( code , splittable ) 
  piton.last_code = piton.Gobble ( n , code )
  piton.last_language = lang
%    \end{macrocode}
% We count the number of lines of the computer listing. The result will be stored
% by Lua in |\g_@@_nb_lines_int|. 
%    \begin{macrocode}
  piton.CountLines ( piton.last_code ) 
  piton.Parse ( lang , piton.last_code )
  piton.join_and_write ( )
end
%    \end{macrocode}
%
% \bigskip
% The following function will be used when the end user has used the key |join|
% or the key |write|.
% The value of the key |join| has been written in the Lua variable |piton.join|.
%    \begin{macrocode}
function piton.join_and_write ( )
  if piton.join ~= '' then
    if not piton.join_files [ piton.join ] then
      piton.join_files [ piton.join ] = piton.get_last_code ( )
    else
      if piton.join_separation == '' then
      piton.join_files [ piton.join ] =
      piton.join_files [ piton.join ]
        .. "\r\n" 
        .. piton.get_last_code ( )
      else
      piton.join_files [ piton.join ] =
      piton.join_files [ piton.join ]
        .. "\r\n"
        .. ( piton.join_separation : gsub ( '##' , '#' ) )
        .. "\r\n"
        .. piton.get_last_code ( )
      end 
    end
  end 
%    \end{macrocode}
%
% Now, if the end user has used the key |write| to write the listing of the
% environment on an external file (on the disk).
%
% We have written the values of the keys |write| and |path-write| in the Lua
% variables |piton.write| and |piton.path_write|.
%
% If |piton.write| is not empty, that means that the key |write| has been used
% for the current environment and, hence, we have to write the content of the
% listing on the corresponding external file.
%    \begin{macrocode}
  if piton.write ~= '' then 
%    \end{macrocode}
% We will write on |file_name| the full name (with the path) of the file in
% which we will write.
%    \begin{macrocode}
    local file_name = ''
    if piton.path_write == '' then
      file_name = piton.write 
    else
%    \end{macrocode}
% If |piton.path-write| is not empty, that means that we will not write on a
% file in the current directory but in another directory. First, we verify that that
% directory actually exists. 
%    \begin{macrocode}
      local attr = lfs.attributes ( piton.path_write )
      if attr and attr.mode == "directory" then
        file_name = piton.path_write .. "/" .. piton.write
      else
%    \end{macrocode}
% If the directory does \emph{not} exist, you raise an (non-fatal) error since
% TeX is not able to create a new directory.
%    \begin{macrocode}
        sprintL3 [[ \@@_error_or_warning:n { InexistentDirectory } ]] 
      end
    end
    if file_name ~= '' then
%    \end{macrocode}
% Now, |file_name| contains the complete name of the file on which we will have
% to write. Maybe the file does not exist but we are sure that the directory
% exist. 
%
% The Lua table |piton.write_files| is a table of Lua strings corresponding to all the
%   files that we will write on the disk in the |\AtEndDocument|. They
%   correspond to the use of the key |write| (and |path-write|).
%    \begin{macrocode}
      if not piton.write_files [ file_name ] then
        piton.write_files [ file_name ] = piton.get_last_code ( )
      else
        piton.write_files [ file_name ] =
        piton.write_files [ file_name ] .. "\n" .. piton.get_last_code ( ) 
      end 
    end
  end
end 
%    \end{macrocode}
%
% \bigskip
% The following command will be used when the end user has set |print=false|.
%    \begin{macrocode}
function piton.GobbleParseNoPrint ( lang , n , code )
  piton.last_code = piton.Gobble ( n , code )
  piton.last_language = lang
  piton.join_and_write ( )
end
%    \end{macrocode}
%
% \bigskip
% The following function will be used when the key |split-on-empty-lines| is in
% force. With that key, the computer listing is split in chunks at the empty
% lines (usually between the abstract functions defined in the computer
% code). LaTeX will be able to change the page between the chunks. The second
% argument |n| corresponds to the value of the key |gobble| (number of spaces to
% gobble). 
%    \begin{macrocode}
function piton.GobbleSplitParse ( lang , n , splittable , code )
  local chunks 
  chunks =
     ( 
       Ct ( 
            ( 
              P " " ^ 0 * "\r" 
              + 
              C ( ( ( 1 - P "\r" ) ^ 1 * ( P "\r" + -1 )  
                    - ( P " " ^ 0 * ( P "\r" + -1 ) ) 
                  ) ^ 1 
                ) 
            ) ^ 0 
          ) 
     ) : match ( piton.Gobble ( n , code ) )
  sprintL3 [[ \begingroup ]] 
  sprintL3 
    ( 
      [[ \PitonOptions { split-on-empty-lines = false, gobble = 0, ]]
      .. "language = " .. lang .. "," 
      .. "splittable = " .. splittable .. "}"
    )
  for k , v in pairs ( chunks ) do 
    if k > 1 then 
      sprintL3 ( [[ \l_@@_split_separation_tl ]] ) 
    end 
    tex.print
      ( 
        [[\begin{]] .. piton.env_used_by_split .. "}\r" 
        .. v 
        .. [[\end{]] .. piton.env_used_by_split .. "}\r" 
      )  
  end
  sprintL3 [[ \endgroup ]] 
end 
%    \end{macrocode}
%
%  \bigskip 
%    \begin{macrocode}
function piton.RetrieveGobbleSplitParse ( lang , n , splittable , code )
  local s 
  s = ( ( P " " ^ 0 * "\r" ) ^ -1 * C ( P ( 1 ) ^ 0 ) * -1 ) : match ( code )  
  piton.GobbleSplitParse ( lang , n , splittable , s )
end 
%    \end{macrocode}
% 
% \bigskip
% The following Lua string will be inserted between the chunks of code created
% when the key |split-on-empty-lines| is in force. It's used only once: you have
% given a name to that Lua string only for legibility. The token list
% |\l_@@_split_separation_tl| corresponds to the key |split-separation|. That
% token list must contain elements inserted in \emph{vertical mode} of TeX.
%    \begin{macrocode}
piton.string_between_chunks = 
 [[ \par \l_@@_split_separation_tl \mode_leave_vertical: ]]
 .. [[ \global \g_@@_line_int  = 0 ]]
%    \end{macrocode}
% The counter |\g_@@_line_int| will be used to control the points where the code
% may be broken by a change of page (see the key |splittable|).
% 
% \bigskip
% The following public Lua function is provided to the developer. 
%    \begin{macrocode}
function piton.get_last_code ( ) 
  return LPEG_cleaner[piton.last_language] : match ( piton.last_code )
         : gsub ( '\r\n?' , '\n' ) 
end
%    \end{macrocode}
%
% 
% \subsection{To count the number of lines}
%
%    \begin{macrocode}
local CountBeamerEnvironments
function CountBeamerEnvironments ( code ) return
   (
     Ct (
          (
            P "\\begin{" * beamerEnvironments * ( 1 - P "\r" ) ^ 0 * C "\r"
            +
            ( 1 - P "\r" ) ^ 0 * "\r"
          ) ^ 0
          * ( 1 - P "\r" ) ^ 0 
          * -1
        )  / table.getn
   ) : match ( code )
end 
%    \end{macrocode}
%
% \bigskip
% The following function counts the lines of |code| except the lines which
% contains only instructions for the environements of Beamer.
%
% It is used in |GobbleParse| and at the beginning of |\@@_composition:| (in some
% rare circumstancies).
%
% Be careful. We have tried a version with |string.gsub| without success.
%    \begin{macrocode}
function piton.CountLines ( code )
  local count
  count =
     ( Ct ( ( ( 1 - P "\r" ) ^ 0 * C "\r" ) ^ 0
            * 
            (
               space ^ 0 * ( 1 - P "\r" - space ) *  ( 1 - P "\r" ) ^ 0 * Cc "\r"
               + space ^ 0 
            ) ^ -1
            * -1
          ) / table.getn
     ) : match ( code )
  if piton.beamer then
    count = count - 2 * CountBeamerEnvironments ( code )
  end 
  sprintL3 ( [[ \int_gset:Nn \g_@@_nb_lines_int { ]] .. count .. "}" )  
end 
%    \end{macrocode}
%
%
% \bigskip
% The following function is only used once (in |piton.GobbleParse|). We have
% written an autonomous function only for legibility. The number of lines of the
% code will be stored in |\l_@@_nb_non_empty_lines_int|. It will be used to
% compute the largest number of lines to write (when |line-numbers| is in force).
%    \begin{macrocode}
function piton.CountNonEmptyLines ( code )
  local count = 0
%    \end{macrocode}
% The following code is not clear. We should try to replace it by use of the |string|
% library of Lua.
%    \begin{macrocode}
  count =
     ( Ct ( ( P " " ^ 0 * "\r"
              + ( 1 - P "\r" ) ^ 0 * C "\r" ) ^ 0
            * ( 1 - P "\r" ) ^ 0 
            * -1
          ) / table.getn
     ) : match ( code )
  count = count + 1
%    \end{macrocode}
%
%    \begin{macrocode}
  if piton.beamer then
    count = count - 2 * CountBeamerEnvironments ( code )
  end 
  sprintL3 
   ( [[ \int_set:Nn  \l_@@_nb_non_empty_lines_int { ]] .. count .. "}" )
end 
%    \end{macrocode}
%
%
% 
% \bigskip
% The following function stores in |\l_@@_first_line_int| and
% |\l_@@_last_line_int| the numbers of lines of the file |file_name|
% corresponding to the strings |marker_beginning| and |marker_end|.
%
% |s| is the marker of the beginning and |t| is the marker of the end.
%    \begin{macrocode}
function piton.ComputeRange ( s , t , file_name )
  local first_line = -1
  local count = 0
  local last_found = false
  for line in io.lines ( file_name ) do 
    if first_line == -1 then 
      if line : sub ( 1 , #s ) == s then 
        first_line = count 
      end 
    else 
      if line : sub ( 1 , #t ) == t then 
        last_found = true 
        break 
      end 
    end 
    count = count + 1 
  end
  if first_line == -1 then 
    sprintL3 [[ \@@_error_or_warning:n { begin~marker~not~found } ]] 
  else 
    if not last_found then 
      sprintL3 [[ \@@_error_or_warning:n { end~marker~not~found } ]] 
    end
  end
  sprintL3 ( 
      [[ \int_set:Nn \l_@@_first_line_int { ]] .. first_line .. ' + 2 }' 
      .. [[ \global \l_@@_last_line_int = ]] .. count )
end
%    \end{macrocode}
%
% \bigskip
% \subsection{To determine the empty lines of the listings}
%
% Despite its name, the Lua function |ComputeLinesStatus| computes
% |piton.lines_status| but also |piton.empty_lines|.
%
% \medskip
% In |piton.empty_lines|, a line will have the number 0 if it's a empty line (in
% fact a blank line, with only spaces) and 1 elsewhere.
% 
% \medskip
% In |piton.lines_status|, each line will have a status with regard the
% breaking points allowed (for the changes of pages).
% \begin{itemize}
% \item 0 if the line is empty and a page break is allowed;
% \item 1 if the line is not empty but a page break is allowed after that line;
% \item 2 if a page break is \emph{not} allowed after that line (empty or not empty).
% \end{itemize}
%    
% \medskip
% |splittable| is the value of |\l_@@_splittable_int|.
% However, if |splittable-on-empty-lines| is in force, |splittable| is the
% opposite of |\l_@@_splittable_int|.
%    \begin{macrocode}
function piton.ComputeLinesStatus ( code , splittable ) 
%    \end{macrocode}
% The lines in the listings which correspond to the beginning or the end of an
% environment of Beamer (eg. |\begin{uncoverenv}|) must be retrieved (those
% lines have \emph{no} number and therefore, \emph{no} status).
%    \begin{macrocode}
  local lpeg_line_beamer
  if piton.beamer then
    lpeg_line_beamer = 
       space ^ 0 
        * P [[\begin{]] * beamerEnvironments * "}"
        * ( "<" * ( 1 - P ">" ) ^ 0 * ">" ) ^ -1 
       +
       space ^ 0 
        * P [[\end{]] * beamerEnvironments * "}" 
  else 
    lpeg_line_beamer = P ( false ) 
  end 
%    \end{macrocode}
%    \begin{macrocode}
  local lpeg_empty_lines =
    Ct (
         ( lpeg_line_beamer * "\r" 
           +
           P " " ^ 0 * "\r" * Cc ( 0 )
           + 
           ( 1 - P "\r" ) ^ 0 * "\r" * Cc ( 1 )
         ) ^ 0
         * 
         ( lpeg_line_beamer + ( 1 - P "\r" ) ^ 1 * Cc ( 1 ) ) ^ -1
       )
    * -1
%    \end{macrocode}
%    \begin{macrocode}
  local lpeg_all_lines =    
    Ct ( 
         ( lpeg_line_beamer * "\r" 
           +
           ( 1 - P "\r" ) ^ 0 * "\r" * Cc ( 1 )
         ) ^ 0 
         * 
         ( lpeg_line_beamer + ( 1 - P "\r" ) ^ 1 * Cc ( 1 ) ) ^ -1
       )
    * -1
%    \end{macrocode}
% We begin with the computation of |piton.empty_lines|. It will be used in
% conjonction with |line-numbers|. 
%    \begin{macrocode}
  piton.empty_lines = lpeg_empty_lines : match ( code ) 
%    \end{macrocode}
% 
% Now, we compute |piton.lines_status|. It will be used in conjonction with
% |splittable| and |splittable-on-empty-lines|. 
%
% Now, we will take into account the current value of |\l_@@_splittable_int|
% (provided by the \emph{absolute value} of the argument |splittable|).
%    \begin{macrocode}
  local lines_status
  local s = splittable
  if splittable < 0 then s = - splittable end 
%    \end{macrocode}
% 
%    \begin{macrocode}
  if splittable > 0 then  
    lines_status = lpeg_all_lines : match ( code ) 
  else
%    \end{macrocode}
% Here, we should try to copy |piton.empty_lines| but it's not easy.
%    \begin{macrocode}
    lines_status = lpeg_empty_lines : match ( code ) 
    for i , x in ipairs ( lines_status ) do
      if x == 0 then
        for j = 1 , s - 1 do
          if i + j > #lines_status then break end 
          if lines_status[i+j] == 0 then break end 
            lines_status[i+j] = 2 
        end
        for j = 1 , s - 1 do
          if i - j == 1 then break end 
          if lines_status[i-j-1] == 0 then break end 
          lines_status[i-j-1] = 2 
        end
      end 
    end 
  end 
%    \end{macrocode}
% 
% In all cases (whatever is the value of |splittable-on-empty-lines|) we have to
% deal with both extremities of the listing to format.
%
% First from the beginning of the code.
%    \begin{macrocode}
  for j = 1 , s - 1 do
    if j > #lines_status then break end
    if lines_status[j] == 0 then break end
    lines_status[j] = 2
  end
%    \end{macrocode}
% Now, from the end of the code.
%    \begin{macrocode}
  for j = 1 , s - 1 do 
    if #lines_status - j == 0 then break end 
    if lines_status[#lines_status - j] == 0 then break end
    lines_status[#lines_status - j] = 2
  end 
%    \end{macrocode}
% 
% \bigskip
%    \begin{macrocode}
  piton.lines_status = lines_status
end 
%    \end{macrocode}
%
%    \begin{macrocode}
function piton.TranslateBeamerEnv ( code )
  local s
  s = 
  (
    Ct (
         (
            space ^ 0
            * C (
                  ( P "\\begin{" + "\\end{" )
                  * beamerEnvironments * "}" * ( 1 - P "\r" ) ^ 0 * "\r"
                )
            + C ( ( 1 - P "\r" ) ^ 0 * "\r" )
          ) ^ 0
          *
          (
            (
              space ^ 0
              * C (
                    ( P "\\begin{" + "\\end{" )
                    * beamerEnvironments * "}" * ( 1 - P "\r" ) ^ 0 * -1
                  )
              + C ( ( 1 - P "\r" ) ^ 1 ) * -1
            ) ^ -1
          )
       ) ^ -1  / table.concat
   ) : match ( code )
   sprintL3 ( [[ \tl_set:Nn \l_@@_listing_tl { ]] )
   tex.sprint ( luatexbase.catcodetables.other , s )
   sprintL3 ( "}" ) 
end
%    \end{macrocode}
% 
% \bigskip
% \subsection{To create new languages with the syntax of listings}
%
%    \begin{macrocode}
function piton.new_language ( lang , definition )
  lang = lang : lower ( )
%    \end{macrocode}
%
% \bigskip
%    \begin{macrocode}
  local alpha , digit = lpeg.alpha , lpeg.digit 
  local extra_letters = { "@" , "_" , "$" } -- 
%    \end{macrocode}
%
% 
% \bigskip
% The command |add_to_letter| (triggered by the key ||) don't write right away
% in the \textsc{lpeg} pattern of the letters in an intermediate |extra_letters|
% because we may have to retrieve letters from that ``list'' if there appear in
% a key |alsoother|.
%    \begin{macrocode}
  function add_to_letter ( c )
    if c ~= " " then table.insert ( extra_letters , c ) end
  end 
%    \end{macrocode}
%
% For the digits, it's straitforward.
%    \begin{macrocode}
  function add_to_digit ( c )
    if c ~= " " then digit = digit + c end 
  end 
%    \end{macrocode}
%
% \bigskip
% The main use of the key |alsoother| is, for the language LaTeX, when you have
% to retrieve some characters from the list of letters, in particular |@| and
% |_| (which, by default, are not allowed in the name of a control sequence in
% TeX). 
%
% \medskip
% (In the following \textsc{lpeg} we have a problem when we try to add |{| and
% |}|). 
%    \begin{macrocode}
  local other = S ":_@+-*/<>!?;.()[]~^=#&\"\'\\$" -- 
  local extra_others = { } 
%    \end{macrocode}
%
%    \begin{macrocode}
  function add_to_other ( c )
    if c ~= " " then 
%    \end{macrocode}
% We will use |extra_others| to retrieve further these characters from the list
% of the letters. 
%    \begin{macrocode}
      extra_others[c] = true 
%    \end{macrocode}
% The \textsc{lpeg} pattern |other| will be used in conjunction with the key
% |tag| (mainly for languages such as \textsc{html} and \textsc{xml}) for the
% character |/| in the closing tags |</....>|).
%    \begin{macrocode}
      other = other + P ( c )
    end 
  end 
%    \end{macrocode}
% 
%
% \bigskip
% Now, the first transformation of the definition of the language, as provided
% by the end user in the argument |definition| of |piton.new_language|.
%    \begin{macrocode}
  local def_table 
  if ( S ", " ^ 0 * -1 ) : match ( definition ) then 
    def_table = {} 
  else
    local strict_braces  =
      P { "E" , 
          E = ( "{" * V "F" * "}" + ( 1 - S ",{}" ) ) ^ 0  ,
          F = ( "{" * V "F" * "}" + ( 1 - S "{}" ) ) ^ 0 
        }
    local cut_definition =
      P { "E" ,
          E = Ct ( V "F" * ( "," * V "F" ) ^ 0 ) ,
          F = Ct ( space ^ 0 * C ( alpha ^ 1 ) * space ^ 0 
                  * ( "=" * space ^ 0 * C ( strict_braces ) ) ^ -1 )
        }
    def_table = cut_definition : match ( definition )
  end 
%    \end{macrocode}
% The definition of the language, provided by the end user of \pkg{piton} is
% now in the Lua table |def_table|. We will use it \emph{several times}.
%
% \medskip
% The following \textsc{lpeg} will be used to extract arguments in the values of
% the keys (|morekeywords|, |morecomment|, |morestring|, etc.).
%    \begin{macrocode}
  local tex_braced_arg = "{" * C ( ( 1 - P "}" ) ^ 0 ) * "}" 
  local tex_arg = tex_braced_arg + C ( 1 ) 
  local tex_option_arg =  "[" * C ( ( 1 - P "]" ) ^ 0 ) * "]" + Cc ( nil ) 
%    \end{macrocode}
%
%    \begin{macrocode}
  local args_for_tag 
    =  tex_option_arg
       * space ^ 0 
       * tex_arg
       * space ^ 0
       * tex_arg
%    \end{macrocode}
%
%    \begin{macrocode}
  local args_for_morekeywords 
    = "[" * C ( ( 1 - P "]" ) ^ 0 ) * "]" 
       * space ^ 0 
       * tex_option_arg
       * space ^ 0
       * tex_arg
       * space ^ 0
       * ( tex_braced_arg + Cc ( nil ) ) 
%    \end{macrocode}
%
%    \begin{macrocode}
  local args_for_moredelims
    = ( C ( P "*" ^ -2 ) + Cc ( nil ) ) * space ^ 0 
      * args_for_morekeywords
%    \end{macrocode}
%
%    \begin{macrocode}
  local args_for_morecomment
    = "[" * C ( ( 1 - P "]" ) ^ 0 ) * "]" 
       * space ^ 0 
       * tex_option_arg 
       * space ^ 0
       * C ( P ( 1 ) ^ 0 * -1 )
%    \end{macrocode}
%
%
% \bigskip
% We scan the definition of the language (i.e. the table |def_table|) in order
% to detect the potential key |sensitive|. Indeed, we have to catch that key
% before the treatment of the keywords of the language. We will also look for
% the potential keys |alsodigit|, |alsoletter| and |tag|. 
%    \begin{macrocode}
  local sensitive = true 
  local style_tag , left_tag , right_tag 
  for _ , x in ipairs ( def_table ) do
    if x[1] == "sensitive" then 
      if x[2] == nil or ( P "true" ) : match ( x[2] ) then 
        sensitive = true 
      else 
        if ( P "false" + P "f" ) : match ( x[2] ) then sensitive = false end
      end
    end
    if x[1] == "alsodigit" then x[2] : gsub ( "." , add_to_digit ) end 
    if x[1] == "alsoletter" then x[2] : gsub ( "." , add_to_letter ) end 
    if x[1] == "alsoother" then x[2] : gsub ( "." , add_to_other ) end 
    if x[1] == "tag" then
      style_tag , left_tag , right_tag = args_for_tag : match ( x[2] ) 
      style_tag = style_tag or [[\PitonStyle{Tag}]]
    end 
  end
%    \end{macrocode}
% Now, the \textsc{lpeg} for the numbers. Of course, it uses |digit| previously
% computed. 
%    \begin{macrocode}
  local Number =
    K ( 'Number.Internal' ,
        ( digit ^ 1 * "." * # ( 1 - P "." ) * digit ^ 0 
          + digit ^ 0 * "." * digit ^ 1 
          + digit ^ 1 )
        * ( S "eE" * S "+-" ^ -1 * digit ^ 1 ) ^ -1
        + digit ^ 1 
      ) 
%    \end{macrocode}
%
%    \begin{macrocode}
  local string_extra_letters = ""
  for _ , x in ipairs ( extra_letters ) do 
    if not ( extra_others[x] ) then
     string_extra_letters = string_extra_letters .. x      
    end 
  end 
  local letter = alpha + S ( string_extra_letters ) 
                  + P "â" + "à" + "ç" + "é" + "è" + "ê" + "ë" + "ï" + "î"
                    + "ô" + "û" + "ü" + "Â" + "À" + "Ç" + "É" + "È" + "Ê" + "Ë"
                    + "Ï" + "Î" + "Ô" + "Û" + "Ü"
%    \end{macrocode}
% 
%    \begin{macrocode}
  local alphanum = letter + digit
  local identifier = letter * alphanum ^ 0
  local Identifier = K ( 'Identifier.Internal' , identifier )
%    \end{macrocode}
%
% 
% \bigskip
% Now, we scan the definition of the language (i.e. the table |def_table|) for
% the keywords.
%
%
% The following LPEG does \emph{not} catch the optional argument between square
% brackets in first position.
%    \begin{macrocode}
  local split_clist = 
    P { "E" ,
         E = ( "[" * ( 1 - P "]" ) ^ 0 * "]" ) ^ -1  
             * ( P "{" ) ^ 1
             * Ct ( V "F" * ( "," * V "F" ) ^ 0 ) 
             * ( P "}" ) ^ 1 * space ^ 0 ,
         F = space ^ 0 * C ( letter * alphanum ^ 0 + other ^ 1 ) * space ^ 0 
      }
%    \end{macrocode}
% The following function will be used if the keywords are not case-sensitive.
%    \begin{macrocode}
  local keyword_to_lpeg
  function keyword_to_lpeg ( name ) return 
    Q ( Cmt ( 
              C ( identifier ) , 
              function ( _ , _ , a ) return a : upper ( ) == name : upper ( )
              end 
            ) 
      ) 
  end 
  local Keyword = P ( false )  
  local PrefixedKeyword = P ( false )  
%    \end{macrocode}
% Now, we actually treat all the keywords and also the key |moredirectives|.
%    \begin{macrocode}
  for _ , x in ipairs ( def_table )
  do if x[1] == "morekeywords" 
        or x[1] == "otherkeywords" 
        or x[1] == "moredirectives" 
        or x[1] == "moretexcs"
     then
        local keywords = P ( false )
%    \end{macrocode}
%    \begin{macrocode}
        local style = [[\PitonStyle{Keyword}]]
        if x[1] == "moredirectives" then style = [[\PitonStyle{Directive}]] end
        style =  tex_option_arg : match ( x[2] ) or style
        local n = tonumber ( style )
        if n then 
          if n > 1 then style = [[\PitonStyle{Keyword]] .. style .. "}" end
        end 
%    \end{macrocode}
%    \begin{macrocode}
        for _ , word in ipairs ( split_clist : match ( x[2] ) ) do
          if x[1] == "moretexcs" then
            keywords = Q ( [[\]] .. word ) + keywords
          else 
            if sensitive 
%    \end{macrocode}
% The documentation of \pkg{lstlistings} specifies that, for the key
% |morekeywords|, if a keyword is a prefix of another keyword, then the prefix
% must appear first. However, for the \text{lpeg}, it's rather the contrary.
% That's why, here, we add the new element \emph{on the left}.
%    \begin{macrocode}
            then keywords = Q ( word  ) + keywords
            else keywords = keyword_to_lpeg ( word ) + keywords
            end
          end 
        end
        Keyword = Keyword + 
           Lc ( "{" .. style .. "{" ) * keywords * Lc "}}" 
     end 
%    \end{macrocode}
% Of course, the feature with the key |keywordsprefix| is designed for the
% languages TeX, LaTeX, et \emph{al}. In that case, there is two kinds of
% keywords (= control sequences).
% \begin{itemize}
% \item those beginning with |\| and a sequence of characters of catcode
% ``|letter|''; 
% \item those beginning by |\| followed by one character of catcode ``|other|''.
% \end{itemize}
% The following code addresses both cases. Of course, the \textsc{lpeg} pattern
% |letter| must catch only characters of catcode ``|letter|''. That's why we
% have a key |alsoletter| to add new characters in that category (e.g. |:| when
% we want to format L3 code). However, the \textsc{lpeg} pattern is allowed to
% catch \emph{more} than only the characters of catcode ``other'' in TeX.
%    \begin{macrocode}
     if x[1] == "keywordsprefix" then
       local prefix = ( ( C ( 1 - P " " ) ^ 1 ) * P " " ^ 0 ) : match ( x[2] ) 
       PrefixedKeyword = PrefixedKeyword 
          + K ( 'Keyword' , P ( prefix ) * ( letter ^ 1 + other ) )
     end 
  end    
%    \end{macrocode}
%
% 
% \bigskip
% Now, we scan the definition of the language (i.e. the table |def_table|) for
% the strings.
%    \begin{macrocode}
  local long_string  = P ( false )
  local Long_string = P ( false ) 
  local LongString = P (false ) 
  local central_pattern = P ( false ) 
  for _ , x in ipairs ( def_table ) do
    if x[1] == "morestring" then
      arg1 , arg2 , arg3 , arg4 = args_for_morekeywords : match ( x[2] ) 
      arg2 = arg2 or [[\PitonStyle{String.Long}]]
      if arg1 ~= "s" then 
        arg4 = arg3 
      end 
      central_pattern = 1 - S ( " \r" .. arg4 ) 
      if arg1 : match "b" then 
        central_pattern = P ( [[\]] .. arg3 ) + central_pattern
      end
%    \end{macrocode}
% In fact, the specifier |d| is point-less: when it is not in force, it's still
% possible to double the delimiter with a correct behaviour of \pkg{piton}
% since, in that case, \pkg{piton} will compose \emph{two} contiguous strings...
%    \begin{macrocode}
      if arg1 : match "d" or arg1 == "m" then 
        central_pattern = P ( arg3 .. arg3 ) + central_pattern
      end
      if arg1 == "m" 
      then prefix = B ( 1 - letter - ")" - "]" ) 
      else prefix = P ( true ) 
      end
%    \end{macrocode}
% First, a pattern \emph{without captures} (needed to compute |braces|).
%    \begin{macrocode}
     long_string = long_string + 
         prefix 
         * arg3  
         * ( space + central_pattern ) ^ 0 
         * arg4  
%    \end{macrocode}
% Now a pattern \emph{with captures}.
%    \begin{macrocode}
     local pattern = 
         prefix 
         * Q ( arg3 ) 
         * ( SpaceInString + Q ( central_pattern ^ 1 ) + EOL ) ^ 0 
         * Q ( arg4 ) 
%    \end{macrocode}
% We will need |Long_string| in the nested comments.
%    \begin{macrocode}
      Long_string = Long_string + pattern 
      LongString = LongString +
         Ct ( Cc "Open" * Cc ( "{" ..  arg2 .. "{" ) * Cc "}}" )
         * pattern
         * Ct ( Cc "Close" ) 
    end 
  end
%    \end{macrocode}
% The argument of |Compute_braces| must be a pattern \emph{which does no
% catching} corresponding to the strings of the language.
%    \begin{macrocode}
  local braces = Compute_braces ( long_string ) 
  if piton.beamer then Beamer = Compute_Beamer ( lang , braces ) end

  DetectedCommands = 
    Compute_DetectedCommands ( lang , braces ) 
    + Compute_RawDetectedCommands ( lang , braces )

  LPEG_cleaner[lang] = Compute_LPEG_cleaner ( lang , braces ) 
%    \end{macrocode}
%
% \bigskip
% Now, we deal with the comments and the delims.
%    \begin{macrocode}
  local CommentDelim = P ( false ) 

  for _ , x in ipairs ( def_table ) do
    if x[1] == "morecomment" then 
      local arg1 , arg2 , other_args = args_for_morecomment : match ( x[2] ) 
      arg2 = arg2 or [[\PitonStyle{Comment}]]
%    \end{macrocode}
% If the letter |i| is present in the first argument (eg: 
% |morecomment = [si]{(*}{*)}|, then the corresponding comments are discarded. 
%    \begin{macrocode}
      if arg1 : match "i" then arg2 = [[\PitonStyle{Discard}]] end
      if arg1 : match "l" then 
        local arg3 = ( tex_braced_arg + C ( P ( 1 ) ^ 0 * -1 ) )
                     : match ( other_args ) 
        if arg3 == [[\#]] then arg3 = "#" end -- mandatory
        if arg3 == [[\%]] then arg3 = "%" end -- mandatory¨
        CommentDelim = CommentDelim + 
            Ct ( Cc "Open" 
                 * Cc ( "{" .. arg2 .. "{" ) * Cc "}}" ) 
                 * Q ( arg3 ) 
                 * ( CommentMath + Q ( ( 1 - S "$\r" ) ^ 1 ) ) ^ 0 -- $
            * Ct ( Cc "Close" ) 
            * ( EOL + -1 )
      else 
        local arg3 , arg4 = 
          ( tex_arg * space ^ 0 * tex_arg ) : match ( other_args )
        if arg1 : match "s" then 
          CommentDelim = CommentDelim +
              Ct ( Cc "Open" * Cc ( "{" .. arg2 .. "{" ) * Cc "}}" ) 
              * Q ( arg3 ) 
              * ( 
                  CommentMath 
                  + Q ( ( 1 - P ( arg4 ) - S "$\r" ) ^ 1 ) -- $
                  + EOL 
                ) ^ 0  
              * Q ( arg4 ) 
              * Ct ( Cc "Close" ) 
        end
        if arg1 : match "n" then 
          CommentDelim = CommentDelim +
            Ct ( Cc "Open" * Cc ( "{" .. arg2 .. "{" ) * Cc "}}" ) 
             * P { "A" ,
                  A = Q ( arg3 ) 
                      * ( V "A" 
                          + Q ( ( 1 - P ( arg3 ) - P ( arg4 ) 
                                  - S "\r$\"" ) ^ 1 ) -- $
                          + long_string
                          +   "$" -- $
                              * K ( 'Comment.Math' , ( 1 - S "$\r" ) ^ 1 ) --$
                              * "$" -- $
                          + EOL
                        ) ^ 0 
                      * Q ( arg4 )
                 }  
            * Ct ( Cc "Close" ) 
        end
      end
    end 
%    \end{macrocode}
% For the keys |moredelim|, we have to add another argument in first position,
% equal to |*| or |**|.
%    \begin{macrocode}
    if x[1] == "moredelim" then 
      local arg1 , arg2 , arg3 , arg4 , arg5 
        = args_for_moredelims : match ( x[2] )  
      local MyFun = Q 
      if arg1 == "*" or arg1 == "**" then
        function MyFun ( x ) 
          if x ~= '' then return
            LPEG1[lang] : match ( x ) 
          end 
        end
      end
      local left_delim 
      if arg2 : match "i" then
        left_delim = P ( arg4 ) 
      else 
        left_delim = Q ( arg4 )
      end 
      if arg2 : match "l" then 
        CommentDelim = CommentDelim +
            Ct ( Cc "Open" * Cc ( "{" .. arg3 .. "{" ) * Cc "}}" ) 
            * left_delim
            * ( MyFun ( ( 1 - P "\r" ) ^ 1 ) ) ^ 0  
            * Ct ( Cc "Close" ) 
            * ( EOL + -1 ) 
      end
      if arg2 : match "s" then 
        local right_delim 
        if arg2 : match "i" then
          right_delim = P ( arg5 )
        else 
          right_delim = Q ( arg5 )
        end 
        CommentDelim = CommentDelim +
            Ct ( Cc "Open" * Cc ( "{" .. arg3 .. "{" ) * Cc "}}" ) 
            * left_delim
            * ( MyFun ( ( 1 - P ( arg5 ) - "\r" ) ^ 1 ) + EOL ) ^ 0  
            * right_delim
            * Ct ( Cc "Close" ) 
      end
    end 
  end 

  local Delim = Q ( S "{[()]}" )
  local Punct = Q ( S "=,:;!\\'\"" )
%    \end{macrocode}
%
% 
%    \begin{macrocode}
  local Main = 
       space ^ 0 * EOL
       + Space 
       + Tab
       + Escape + EscapeMath 
       + CommentLaTeX
       + Beamer
       + DetectedCommands
       + CommentDelim
%    \end{macrocode}
% We must put |LongString| before |Delim| because, in PostScript, the strings
% are delimited by parenthesis and those parenthesis would be caught by |Delim|.
%    \begin{macrocode}
       + LongString
       + Delim
       + PrefixedKeyword
       + Keyword * ( -1 + # ( 1 - alphanum ) ) 
       + Punct 
       + K ( 'Identifier.Internal' , letter * alphanum ^ 0 )
       + Number
       + Word
%    \end{macrocode}
%
% The \textsc{lpeg} |LPEG1[lang]| is used to reformat small elements, for
% example the arguments of the ``detected commands''.
%
% Of course, here, we must not put |local|, of course.
%   \begin{macrocode}
  LPEG1[lang] = Main ^ 0 
%    \end{macrocode}
%
% 
% The \textsc{lpeg} |LPEG2[lang]| is used to format general chunks of code.
%    \begin{macrocode}
  LPEG2[lang] = 
    Ct (
         ( space ^ 0 * P "\r" ) ^ -1 
         * Lc [[ \@@_begin_line: ]]
         * LeadingSpace ^ 0 
         * ( space ^ 1 * -1 + space ^ 0 * EOL + Main ) ^ 0 
         * -1 
         * Lc [[ \@@_end_line: ]]
       )
%    \end{macrocode}
%
% If the key |tag| has been used. Of course, this feature is designed for the
% languages such as \textsc{html} and \textsc{xml}.
%    \begin{macrocode}
  if left_tag then
    local Tag = Ct ( Cc "Open" * Cc ( "{" .. style_tag .. "{" ) * Cc "}}" ) 
                * Q ( left_tag * other ^ 0 ) -- $
                * ( ( ( 1 - P ( right_tag ) ) ^ 0 )
                  / ( function ( x ) return LPEG0[lang] : match ( x ) end ) )
                * Q ( right_tag ) 
                * Ct ( Cc "Close" ) 
    MainWithoutTag
            = space ^ 1 * -1
            + space ^ 0 * EOL 
            + Space 
            + Tab
            + Escape + EscapeMath 
            + CommentLaTeX
            + Beamer
            + DetectedCommands
            + CommentDelim
            + Delim
            + LongString
            + PrefixedKeyword
            + Keyword * ( -1 + # ( 1 - alphanum ) ) 
            + Punct 
            + K ( 'Identifier.Internal' , letter * alphanum ^ 0 )
            + Number
            + Word 
    LPEG0[lang] = MainWithoutTag ^ 0 
    local LPEGaux = Tab + Escape + EscapeMath + CommentLaTeX 
                    + Beamer + DetectedCommands + CommentDelim + Tag 
    MainWithTag 
            = space ^ 1 * -1
            + space ^ 0 * EOL 
            + Space 
            + LPEGaux 
            + Q ( ( 1 - EOL - LPEGaux ) ^ 1 )
    LPEG1[lang] = MainWithTag ^ 0 
    LPEG2[lang] = 
      Ct (
           ( space ^ 0 * P "\r" ) ^ -1 
           * Lc [[ \@@_begin_line: ]]
           * Beamer
           * LeadingSpace ^ 0 
           * LPEG1[lang]
           * -1 
           * Lc [[ \@@_end_line: ]]
         )
  end
end
%    \end{macrocode}
%
% \subsection{We write the files (key 'write') and join the files in the PDF (key 'join')}
%
%    \begin{macrocode}
function piton.write_files_now ( )
  for file_name , file_content in pairs ( piton.write_files ) do
    local file = io.open ( file_name , "w" ) 
    if file then
      file : write ( file_content )
      file : close ( ) 
    else
      sprintL3
        ( [[ \@@_error_or_warning:nn { FileError } { ]] .. file_name .. "}" )
    end 
  end
end
%    \end{macrocode}
%
% \bigskip
% \subsection{Conversion from utf8 to utf16}
%
% Caution: the following function should be considered as public.
%    \begin{macrocode}
function piton.utf16 ( str )
  local hex = { "FEFF" }  -- BOM UTF-16BE
  for _, codepoint in utf8.codes(str) do
    table.insert(hex, string.format("%04X", codepoint))
  end
  return table.concat(hex)
end
%</LUA> 
%    \end{macrocode}
%
%
% \end{document}
% 
% Local Variables:
% fill-column: 80
% End:
