VIRTUAL ROOM EMULATOR VST --------------DEMO VERSION ------------------------------------
==================================================
<<<<<<<<<<<<<<<www.syntheway.net>>>>>>>>>>>>>>>>>>>>

Thank you for try the VIRTUAL ROOM EMULATOR VST - v. 1.3 Plug-in - Demo- 

==================================================
Note: THE FULL VERSION  removes intermitting noise (Demo version)
================================================== 
-----------------------------------------------------------------------------------------------------------------

 This document contains the following topics:

    1. Description
    2. System Requirements
    3. Installation
    4. Version History
    5. Evaluation & Registration
    6. Technical Support and Contact
    7. Updates
    8. License
    9. Plug-in Credits
  10. Acknowledgements

1. Description
-------------------
 
Virtual Room Emulator is a VST reverberator plug-in for native PC platforms. Used to create psycho-acoustic models in the DSP environment. 
It simulates the reverberation of a sound in a rectangular type room, allowing separate control of the room's width, depth and height. It also allows you to control the distance between the listener and the sound positioned in that virtual room. 

The Virtual Room Emulator section offers control over the size, width, and damping factor of the room by way of three linkable sliders. Produces a natural sounding room reverberation effect that gives you true room perception, from small rooms to large concert halls.

Features:

# Reverberation technique that simulates a real acoustic environment of a room. 
# Separate control of Room's dimensions, produces naturally sounding reverberation.
# It uses reverberation engine that does not produce metal harmonics. 
# 32-bit sound processing with sample rate of 96kHz. 
# 16 predefined room configurations that range from tiny to extra large rooms , allow you to quickly switch between different Virtual Room's configurations.
# The plugin is perfectly suited for any type of audio production when acoustic space simulation is needed from recording to post production. 

Parameters:

- S i z e : This is the Size ( front - rear distance ) of the room. It ranges 0 to 10 ( smallest to largest) 
- W i d t h : This represents the width ( left-right distance) of the room. It ranges 0 (small) to 10 (wide). 

- D a m p : ( D a m p i n g f a c t o r ) This is a way to describe the surface absorption, or how sound is reflected by the walls, floors and ceilings. A higher Damp setting causes high frequencies to decay faster. It Ranges 0 (near no absorption) to 10 (high absorption).

- G a t e : Gate Type Input. Only used in Freeze and Gated modes.

- M o d e : Selects between Normal, Freeze and Gated modes.
* Normal: The usual reverb behavior.
* Freeze: When this mode is active,the gate input works as on/off switch for sustain-like effect. When the gate is low, the reverb works as normal. When the gate goes high, Virtual Room Emulator freezes the effect. 
* Gated:  When in this mode, Virtual Room Emulator only outputs wet (reverberated) signal when the gate is high. When the gate is set to low, a little decay is internally applied to smooth the transition back to, the dry-only state.

- M i x : The proportion of the "Dry/Wet" signal in the output 


2. System Requirements
----------------------------------
Before you install VST instruments & Effects, please make sure your computer fulfills the following requirements:

# Operating System : Windows 98/ME, Windows 2000, Windows XP.
# Processor: PENTIUM III 500 MHz or equivalent.
# RAM: 64 MB of memory (128 MB recommended)
# VST 2.0 Host application like: FL Studio 5.xx, 4.xx, Steinberg Cubase VST 5/32, Cubase VST 5 Score, Cubase VST 5 Standard, Cubase SL 1.xx, 2.xx, Cubase SX 1.xx, 2.xx, 3.xx, Synapse Orion Pro 4.xx, Synapse Orion Platinum 5.xx, Audio Mulch 0.9xx, Steinberg Nuendo 1.xx, 2.xx, 3.xx, Cubase, Samplitude 7.xx and more ...
# Graphics (minimum): 16-bit 800x600
# Work with other hosts, as a DirectX plug-in using the FXpansion Vst-Dx V3/4 adapter or  running DirectiXer 2. Is the easiest way to gain access to the hundreds of  VST plug-ins from your DirectX audio application. Compatible with the Cakewalk Audio line (v6 and higher), FASoft N-Track, Sonic Foundry ACID, Sound Forge and Vegas (as an Aux effect only, in Vegas), Syntrillium Cool Edit Pro, SEK'D Samplitude and Samplitude 2496, and many more.
# Other Components: PC configured according to the specifications of the host application
# An ASIO soundcard is recommended for low latency real-time play.


3. Installation
-------------------
The files must be in a directory where the VST host is looking for VST plugins. Unzip, unrar the files ".dll and .dat"  into your VST Plugins folder.


4. Version History
------------------------

v.1.3 - Add Mode selector: Normal, Gated, Freeze. Add Gate Input knob: only used in Freeze and Gated modes. Minor GUI modifications. Fixed minor bugs.

v1.2 - Set Presets as Default working properly now (before the last 2 presets were getting truncated)
- Fixed stability issues on some hosts and W98/ME.

v1.1 - Some GUI modifications.
- Fixed internal Preset-Name problems

v1.0: Initial version.


5. Evaluation & Registration
--------------------------------------
The DEMO VERSION is full functional. You can do anything you can do with the full version, you can even save your presets. Also in the demo are some presets included to demonstrate the instruments capabilities. The only restrictions are, that the demo emits a decent noise about every 10 seconds. The full version does not have this intermitting noise.

The program is a SHAREWARE. You are hereby licensed to use this software for evaluation purposes without charge for a period of 30 days. If you use this software after the 30 day evaluation period a registration fee is required.
If you decide to keep the software and get full version, you must register your copy.
Note that by registering the software, you enable me to improve it and design new features.

Please test extensively the demo version of your selected product (s) in your host to make sure there are no misbehaviors before purchasing.

The registration fee is U$15, all updates to version 1.x are free for registered users.
The full version is available to purchase, as downloadable software, and you can download the full version as soon as your payment is received.

Online Shop
Safe Shopping: The latest SSL 128 bits technology for the highest security.
Concerned about security with your credit-card data beeing send over the internet?: this Online Shop uses 128-bit SSL encryption to ensure that nobody else is spying on your data.


6. Technical Support and Contact
-----------------------------------------------
Free Technical Support to Registered Users:

Please take a look at the FAQ (Frequently Asked Questions) at http://faq.syntheway.net , before you contact customer support. 
If you have any problems with instruments and effects, you can contact us by e-mail (English and Spanish languages allowed). Support requests are answered as quickly as possible, if you send the following information:

# Buyer's Receipt Transaction ID Number 
# Syntheway Product 
# Host Application (Name & Version number) 
# A very detailed description of the problem  

Your inquiry will be answered in the order in which it is received. Due to the volume of e-mail, sometimes, these may not be able to respond immediately.

Contacting Syntheway: 

* Information:
 info@syntheway.net

* Contact:
 contact@syntheway.net   

* Sales:
 sales@syntheway.net   

* Tech-support:
 support@syntheway.net

* Webmaster:
 webmaster@syntheway.net 


7. Updates:
-----------------
Please check for updates to this software at

www.syntheway.net  

Benefits Registered Users:  Product updates are always free within a version period (1.x, 2.x etc), sometimes longer.


8. License:
---------------
The file License.txt contains the end-user licensing agreement.


9. Plug-in Credits
--------------------
Concept, Design, optimization, DSP and GUI  by Daniel Alberto Laiseca 


10. Acknowledgements:
----------------------------------
VST is a trademark of Steinberg Soft- und Hardware GmbH. All other trademarks and trade names are the properties of their respective owners, and do not imply owner's endorsement of this product, or guarantee full compliance with owner's standards. 


----------------------------------------------------------------------------------------------------------------------------------------
Syntheway  2004-2005 Daniel Alberto Laiseca. | Buenos Aires - Argentina | 
-----------------------------------------------------------------------------------------------------------------------------------------