# almost all things below are commented out. Uncomment anything you want
# or use the resources instead

# see the manual page for a complete listing of the keywords
# that can be used with 'set'.

set baud 57600

# can be 5, 6, 7, or 8
set bits 8

# can be 0 (= no parity), 1 (= odd parity), or 2 (= even parity)
# set parity 0

# can be 1 or 2
set stopBits 1

# can be nl, cr, or cr/lf
# set newlineTranslation cr

set del on
set meta_tr on
set xoff off 
set rtscts on
set autozm on
# set idleGuard on

# put the modem initialization string here if you like one.
# most modern modems do not need it since they store their setup in 
# non-volatile memory.

echo "Initializing modem..."
transmit "ATM0^M"
