  Howtos-with-LinuxDoc-mini-HOWTO
  David S. Lawyer
  v0.05, October 2005

  This is about how to write HOWTOs using the simple LinuxDoc markup.
  It's primarily for Linux Documentation Project authors (and future
  fledging authors who want to get started fast).  If you want to use
  the more advanced DocBook markup (including XML) see the LDP Authoring
  Guide.
  ______________________________________________________________________

  Table of Contents


  1. Introduction
     1.1 If you want to start immediately
     1.2 Copyright and License
     1.3 Should you write a HOWTO ?
     1.4 Why I wrote this

  2. Information on Writing a HOWTO
     2.1 Copyright
     2.2 Choosing a topic

  3. The Format of HOWTOs
     3.1 Introduction

  4. Comparing LinuxDoc to DocBook
  5. Learning LinuxDoc
     5.1 Introduction
     5.2 Example 1 (file name: example1.sgml)
     5.3 Example 2 (file name: example2.sgml)
     5.4 Example 3
     5.5 LinuxDoc Quick Reference Sheet
        5.5.1 Header Part
        5.5.2 Body Layout
        5.5.3 Fonts
        5.5.4 Lists (nesting is OK)
        5.5.5 Links
        5.5.6 Newline, Verbatim, URLs
        5.5.7 Character Codes (macros)

  6. Getting/Using the LinuxDoc Software
  7. Writing the HOWTO
     7.1 Before you start writing
     7.2 Guidelines
     7.3 Submitting the HOWTO, etc.

  8. More Information


  ______________________________________________________________________

  1.  Introduction

  1.1.  If you want to start immediately

  To only learn LinuxDoc, skip to  ``Learning LinuxDoc''.  If you want
  to start writing immediately, then you may try a "fill in the blanks"
  template which will generate LinuxDoc formatted output.  The LDP HOWTO
  Generator <http://www.nyx.net/~sgjoen/The_LDP_HOWTO_Generator.html>.
  You may use this to just start writing your Howto and then finish it
  later by using a text editor on your PC.



  1.2.  Copyright and License

  Copyright (c) 2001-3 by David S. Lawyer.  You may freely copy and
  distribute (sell or give away) this document.  You may create a
  derivative work and distribute it provided that you license it in the
  spirit of this license and give proper credits.  The author would like
  to receive your comments, suggestions, and plans for any derivative
  work based on this.


  1.3.  Should you write a HOWTO ?

  Do you know things about Linux for which no good free documentation is
  available and which would be useful to others?  Even if you don't know
  the subject well, you can still write about it if you're eager,
  willing, and able to learn more about it.  Can you write clearly using
  a word processor or editor?  Do you want to help thousands of others
  and let them read what you write at no cost to them?  Once you've
  written a document, are you willing to receive email suggestions from
  readers and selectively use this info for improving your HOWTO?  Would
  you like to have your writings be available on hundreds of websites
  throughout the world?  If you can answer yes to these, then you're
  encouraged to write something for the LDP.  But be warned that it may
  take more time than you expected.


  1.4.  Why I wrote this

  Why did I write this when there is already an "LDP Authoring Guide"?
  Well, the LDP guide is a long and detailed work.  If you want to get
  started quickly, you need something much simpler and shorter.

  Thanks to Matt Welsh for his example.sgml file which I used as a major
  source of info for the example sections.


  2.  Information on Writing a HOWTO

  2.1.  Copyright

  All HOWTOs and other LDP documents are copyright by the authors so the
  LDP doesn't have any special rights to your writing.  We only accept
  documents that have a license which  permits anyone to copy and
  distribute the document.  We encourage authors to also allow
  modification in their license.  This way, if the author stops
  maintaining a document, someone else can do so.  For more details see
  our Manifesto.


  2.2.  Choosing a topic

  If you are not sure what to write about, take look at some of LDP's
  documents, including the ones in Unmaintained HOWTOs
  <http://www.tldp.org/authors/unmaint.html>.  Also you may find topics
  that you are interested in that are not adequately covered by existing
  documentation.  If you find something already written and maintained
  that seems to need improvement, try to contact the author.


  3.  The Format of HOWTOs

  3.1.  Introduction

  Our HOWTOs are released to the public in various formats: Plain Text,
  HTML, PostScript, and PDF.  Instead of having to write the same HOWTO
  in all of these formats, just one HOWTO is written in a source format
  which gets converted by computer into all of the others.

  To get an idea of what a source format looks like, take a look at the
  source file of a webpage (if you haven't already).  You will see all
  sorts of words in <angle brackets>.  These are called tags.  These
  webpages (tags and all) are in html: Hypertext Markup Language.  The
  LDP uses formats something like this for its documents.

  The markup languages LDP uses meet the requirements of either Standard
  Generalized Markup Language (SGML) or XML.  The LDP now uses the
  following two flavors of sgml: LinuxDoc and DocBook as well as the
  DocBook flavor of XML.  Interestingly, it turns out that html is still
  another flavor of sgml.

  This mini-HOWTO is all about using the simple LinuxDoc flavor of sgml.
  You may call it "LinuxDoc markup".  It can be converted by computer to
  html, plain text, postscript, pdf, and DocBook.  It's a lot easier
  than html or DocBook and you don't need a special editor for it as
  it's easy to type in the tags (or use macros for them).


  4.  Comparing LinuxDoc to DocBook

  One way to do this is to go to the LDP site  <http://www.linuxdoc.org>
  click on HOWTOs and then compare the sources of the same HOWTO in the
  two formats: LinuxDoc and DocBook.  The DocBook tags are often longer
  than the equivalent LinuxDoc tags and there are sometimes more of them
  needed to do the same task.  DocBook uses <para> and </para> tags to
  enclose each paragraph while LinuxDoc uses only a blank line to
  separate paragraphs (no tags needed).  For some examples see
  Comparison of DocBook to LinuxDoc
  <http://www.lafn.org/~dave/linux/ld_vs_db.txt>

  So there's much more to type with DocBook if you're typing in tags
  manually.  But DocBook has all sorts of tags that don't exist in
  LinuxDoc so it's more advanced.  Just using a subset of DocBook
  doesn't help as you can see from the above examples partly because
  DocBook nests tags (uses more tags to do the same thing).  With a more
  and longer tags the DocBook source becomes harder to read unless you
  use an editor that hides them.  But hiding them has it's drawbacks
  since it's nice to see what tags you've used.

  Still, the number of people who use DocBook greatly exceeds the number
  using LinuxDoc.  But if you do decide to migrate to DocBook there's a
  program by Reuben Thomas (ld2db) which can help make the conversion.
  It's not 100% perfect and you may have to do some manual editing.  The
  LDP also automatically converts a LinuxDoc HOWTO to DocBook after you
  submit it.


  5.  Learning LinuxDoc

  5.1.  Introduction

  LinuxDoc is a lot easier to learn than DocBook.  But most of what you
  learn about LinuxDoc would also be useful for DocBook.  So if you
  eventually decide to go for DocBook, most of the effort spent on
  learning LinuxDoc will not be wasted.

  One way to learn it is by examples.  I've written 3 example files
  ranging from easy to intermediate.  The contents of these files have
  been copied into this Howto.  To turn them into individual files you
  may cut them out (start with the first tag) and write them to files.
  Then you could try turning one into text by using say sgml2txt -f to
  see what it looks like.  Make sure the file names end in .sgml.

  If you want to look at some real examples you can just go to an LDP
  mirror site, find the HOWTOs and select LinuxDoc SGML.  Or go to the
  main site directly: Howto Index (linuxdoc)
  <http://cvsview.tldp.org/index.cgi/LDP/howto/linuxdoc/> Now for the
  first simple example.


  5.2.  Example 1 (file name: example1.sgml)



       <!doctype linuxdoc system>
       <article>
       <title>First Example (example1)
       <author>David S.Lawyer

       <sect> Introduction
       <p> This is a very simple example of "source" for the LinuxDoc text
       formatting system.  This paragraph begins with a paragraph tag (a "p"
       enclosed in angle brackets).  Notice that there are other tags, also
       enclosed in angle brackets.  If you don't see any tags, then you are
       reading a converted file so find the source file: example1.sgml (which
       contains the tags).

       This is the next paragraph.  Note that it is separated from the above
       paragraph by just a blank line.  Thus it needs no "p" tag in front of
       it.  The "p" tag is only needed for the first paragraph of a section
       (just after the sect-tag).  The file suffix: sgml stands for Standard
       Generalized Markup Language.  You are now reading the LinuxDoc flavor
       of sgml as specified in the very first line of this file.

       <sect> Tags
       <p> Tags are words inside angle brackets.  The "sect" tag above
       marks the start of a new section of this example document.
       "Introduction" was the first section and you are now reading the
       second section titled "Tags".  If this were a long document (like a
       book), a section would correspond to a chapter.

       Note that there are "article", "title" and "author" tags at the start
       of this article.  At the end of this article is an "/article" tag
       marking the end of this article.  Thus there is a pair of "article"
       tags, the first being the start tag and the second being the end tag.
       Thus this entire article is enclosed in "article" tags.  In later
       examples you'll see that there are other tags that come in pairs like
       this.   They affect whatever is between the pairs (start tag and end
       tag).  Any tag name which has "/" just before it is an "end tag".

       When this source code is converted to another format (such as plain
       text using the program sgml2txt) the tags are removed.  Tags only help
       the sgml2txt program make the conversion.  There are more tags to
       learn.  So once you understand this example1, please go on to the next
       example: example2.  You don't need to actually memorize the tags, as
       they will be repeated (but with little or no explanation) in later
       examples.
       </article>



  5.3.  Example 2 (file name: example2.sgml)



  <!-- This is a comment.  It's ignored when this source file gets
  converted to other formats.  -->
  <!-- The tag below says that this file is in LinuxDoc format -->
  <!doctype linuxdoc system>

  <article>

  <title>Second Example (example2)
  <author>David S. Lawyer
  <date>v1.0, July 2000

  <abstract>
  This is the abstract.  This document is the second example of using
  the Linuxdoc-SGML flavor of sgml.  It's more complex than the first
  example (example1.sgml) but simpler than the third example
  (example3.sgml).  After you digest this you'll be able to write a
  simple HOWTO using LinuxDoc.  End of the abstract.
  </abstract>

  <!-- The "toc" = Table of Contents.   It will be created here. -->
  <toc>

  <!-- Begin the main part of the article (or document) here.  The part
  above this is sort of a long header. -->

  <sect>This Second Example (example2.sgml)

  <p>Unless you're familiar with markup languages, you should first
  read example1.sgml.  You may want to run these example files thru a
  translator such as sgml2txt to convert them to text and notice how the
  result looks different than this "source" document with all its tags.

  <sect>Article Layout
  <sect1> Document Body

  <p> After the header comes the body of the document, consisting of
  nested sections marked by sect-tags.  Subsections are
  marked by sect1-tags.  Since this is the first subsection
  within the 2nd main section, it's becomes section 2.1.  Within a
  subsection marked by sect1 there may be sub-subsections like
  sect2.  There are even tags like sect3, sect4, etc., but you are
  unlikely to need them.  Note the the real tags must be enclosed in
  angle brackets < and >.

  <sect2> This is a sub-sub-section
  <p>
  It's 2.1.1.  Note that a "p" tag may be on a line by itself.  This
  doesn't change a thing in the resulting documents.

  <sect1>Document Header
  <p> One way to create a header part is just to copy one from another
  .sgml file.  Then replace everything except the tags with the correct
  info for your document.  This is like using a "template".

  <sect> More Features in example3
  <p> With the tags in this example2 you can write a simple short document
  a few pages long.  But for longer documents or for other important
  features such as putting links into documents, you need to study the
  next example: example3.  It will also show you how to create lists and
  fonts.
  </article>



  5.4.  Example 3



  <!doctype linuxdoc system>
  <!-- Note the mailto: after my name.  This allows the reader of html
  format to click on my email address to send me email -->

  <article>
  <title>Third Example (example3)
  <author>David S. Lawyer <url url="mailto:dave@lafn.org">
  <date>v1.0, July 2000
  <abstract>
  This document is the third example of using the LinuxDoc flavor of sgml.
  It's more complex than the second example.
  </abstract>
  <!-- Comment: toc = Table of Contents  -->
  <toc>

  <sect> Fonts
  <p>
  While they will not show up in a plain text output, they will work
  for other conversions.
  <bf>boldface font</bf>   <em>emphasis font</em>     <sf>sans serif</sf>
  <sl>slanted font</sl>    <tt>typewriter font</tt>   <it>italics font</it>
  There's another way to get these same fonts by enclosing the text in
  slashes like this: <bf/boldface font/    <em/emphasis font/
  <sf/sans serif/ <sl/slanted font/     <tt/typewriter font/
  <it/italics font/ Note that DocBook doesn't have font tags so it may
  be best not to use fonts if you plan to convert to DocBook.

  <sect> Links <label id="links_">
  <p> You may create links (something that html browsers may click on to
  go somewhere else).  They might just go to another part of this
  document (cross-references) such as to the "label" above, or they
  could go to a website on the Internet.

  <sect1> Cross-References
  <p> If you click on <ref id="links_" name="Links"> you will be taken to
  the start of the "Links" section above (which is labeled links_).
  The label id may be any word you choose but it's a good idea to avoid
  common words so that you can search for unique labels using your
  editor.  That's why I use links_ (with the underline).  The name of
  this link will be shown (in html format) as the name to click on.
  This name (Links) will also be present in the text rendition.

  <sect1> URL Links
  <p> If you click on <url url="http://www.tldp.org"> you will get
  to the Linux Documentation Project website.  The next link adds a name
  which people will click on: <url url="http://www.linuxdoc.org"
  name="Linux Documentation Project">.  Using this second method, you may
  not even need to explain where the link leads to since it's obvious by
  the name.

  <sect> Prohibited Characters
  <p> Any word you type between angle brackets will be interpreted as a
  tag.  But what if you want to display a tag in a document?  For this
  you use a code word for the angle characters.

  You may use &lt for < and &gt for >.  lt = Less Than, gt =
  Greater Than.  For example, here's a p-tag: &lt;p&gt;.  Of
  course it doesn't actually start any paragraph, but it will appear in
  the converted document as <p>.  These codes all start with an &
  character.  The ; after the lt is to separate it.  It's not needed if
  there is a space after it.  For example: 3 &lt 4.  Actually, if
  you knew that its OK to use an unpaired > then you could have written
  <p> as &lt;p>.  This will not be mistakenly recognized as a tag
  since there is no opening <.  Actually 3 < 4 works fine too.

  There are other characters that you can't put into the document text
  directly.  For & in an AT modem command use: AT&amp;.  If other
  characters cause you trouble (they seldom will) see <ref id="ch_codes"
  name="Character Codes (macros)"> or the "guide" that comes with
  linuxdoc-tools or sgml-tools.

  <sect> Verbatim, Code & Newline
  <sect1> Verbatim
  <p> If you want to insure that it will look exactly like you typed it
  after it's converted  to other formats, use verbatim (verb).  This is
  useful for creating tables, etc.  But some things still get recognized
  as markup even though they are between verbatim tags.  This includes
  the macros starting with & and end tags with /.

  <tscreen><verb>
  % sgml2txt -f example.sgml
  </verb></tscreen>
  The "tscreen" sets the font to typewriter and indents it nicely.

  <sect1> Code
  <p> This encloses computer code between two dashed lines.
  <tscreen><code>
  Put computer source code here
  </code></tscreen>

  <sect1> Newline
  <p> To force a newline use <newline>
  This sentence always starts at the left margin.

  <sect>Lists
  <p>
  This puts items into a list with a bullet at the start of each item.
  They start with the "itemize" tag.
  <itemize>
  <item> This is the first item in a list.
  <item> This is the second item
         <itemize>
         <item> Multiple levels (nesting) are supported.
         <item> The second item in this sublist
         </itemize>
         <enum>
         <item> Enumerated lists using <tt/enum/ also work.
         <item> This is item number 2
         </enum>
  <item> The final item in the main list
  </itemize>
  </article>



  5.5.  LinuxDoc Quick Reference Sheet

  5.5.1.  Header Part



       <!doctype linuxdoc system>
       <article>
       <title>Quick Reference Sheet
       <author>David S. Lawyer
       <date>v1.0, July 2000
       <abstract> abstract here </abstract>
       <toc> <!-- Comment: toc = Table of Contents  -->


  5.5.2.  Body Layout



       <sect> Chapter 1            Note: Put a <p> on the first line of
       <sect1> Subsection 1.1      each section (or subsection, etc.)
       <sect1> Subsection 1.2
       <sect> Chapter 2            Choose title names to replace "Chapter"
       <sect1> Subsection 2.1      "Subsection", etc.
       <sect2> Sub-subsection 2.1.1
       <sect2> Sub-subsection 2.1.2
       <sect1> Subsection 2.2
       </article>



  5.5.3.  Fonts

  There are two ways to get these:

  <bf>boldface font</bf>   <em>emphasis font</em>     <sf>sans serif font</sf>
  <sl>slanted font</sl>    <tt>typewriter font</tt>   <it>italics font</it>
  <bf/boldface/    <em/emphasis/     <sf/sans serif/
  <sl/slanted/     <tt/typewriter/   <it/italics/



  5.5.4.  Lists (nesting is OK)



       Ordinary unnumbered list:               Numbered list:
       <itemize>                               <enum>
       <item> First item                       <item> First item
       <item> Second item                      <item> Second item
       <item> etc.                             <item> etc.
       </itemize>                              </enum>



  5.5.5.  Links



          Cross-References:                            An Email Link:
       <ref id="links_" name="Links">     <url url="mailto:bob@linuxdoc.org">



  5.5.6.  Newline, Verbatim, URLs



  To force a newline <newline>
  <tscreen><verb>
  <url url="http://www.linuxdoc.org">
  <url url="http://www.linuxdoc.org" name="Linux Documentation Project">.
  </verb></tscreen>



  5.5.7.  Character Codes (macros)

  You don't always need to use these.

    Use &amp; for the ampersand (&),

    Use &lt; for a left bracket (<),

    Use &gt; for a right bracket (>),

    Use &etago; for a left bracket with a slash (</)

  Use of these are optional and I seldom use them.

    Use `` and '' for opening and closing double quotes

    Use &shy; for a soft hyphen (that is, an indication that this is a
     good place to break a very long word to insert a hyphen for
     horizontal justification).

  Only use these if LinuxDoc complains about it or fails to generate
  them in the formated document.  I've seldom had to use them.

    Use &dollar; for a dollar sign ($),

    Use &num; for a hash (#),

    Use &percnt; for a percent (%),

    Use &tilde; for a tilde (~),

    Use &dquot; for ".


  6.  Getting/Using the LinuxDoc Software

  You could write a LinuxDoc document without having any LinuxDoc
  software.  However, it's likely that it would contain some errors in
  the tags (or their use) so that it would be returned to you for
  correction.  Even if there were no errors, the results might not not
  look quite right.  So it's best for you to have the software to
  convert your source code on your computer.

  The Debian distribution of Linux has a linuxdoc-tools package.  There
  is also a rpm package for non-Debian distributions.  It was formerly
  called sgml-tools.  Don't use the sgmltools-2 package which is
  primarily for DocBook.

  To use it, you run converter programs on the *.sgml files.  For
  example to get text output, type: "sgml2txt --pass="-P-bc" --blanks=1
  my-HOWTO.sgml".  To get html output, type: "sgml2html my-HOWTO.sgml".
  If it shows errors, it will show the line number and the column number
  where the error is in the source file.  Typing "man -k sgml" should
  show you a number of other programs with a one-line description of
  each but not all of them are for linuxdoc-sgml.

  For sgml2txt, the option --pass="-P-bc" is needed to get pure text
  output since otherwise you get text output which puts emphasis on
  words that need emphasis: by overstriking for old impact printers
  (avoided by the "c" option in -bc), or by sending escape sequences
  (avoided by the "b" option in -bc) to terminals.

  In case you are interested, the --pass passes the -P-bc option to the
  groff program (used by sgml2txt) and the -P option of groff passes the
  -bc option to grotty (a post processor for groff forcing grotty to
  generate just plain text output.  What a mess!  The default should be
  plain text so that all of this passing of options wouldn't be needed.
  If you don't use this --pass ... option then if you use the Linux
  "cat" command to display the text, it looks great.  But using pagers
  or editors on the text output file usually results in the escape
  characters being eaten so you see a bunch of unwanted characters in
  your texts that were supposed to be the "sequence" portion of the
  escape sequence.


  7.  Writing the HOWTO

  7.1.  Before you start writing

  First email the HOWTO coordinator at  <mailto:linux-
  howto@metalab.unc.edu> or  <mailto:feedback@linuxdoc.org>.  If you're
  taking over an unmaintained HOWTO, contact the former author.  This
  may required by the copyright-license but you should do it out of
  courtesy even it it's not required.


  7.2.  Guidelines

  These are mostly by Tim Bynum (a former HOWTO coordinator).

    Be sure and use an accepted format (such as LinuxDoc :-).

    Try to use meaningful structure and organization, and write
     clearly. Remember that many of the people reading HOWTOs do not
     speak English as their first language.

    Make sure that all of the information is correct. I can't stress
     this enough. When in doubt, speculate, but make it clear that
     you're only guessing.  I use ?? if I'm not sure.

    Make sure that you are covering the most recent version of the
     available software.

    Consider including a "FAQ" section or sections called "Common
     Problems" or "Trouble Shooting".

    Be sure to copyright it in your name and include a license which
     meets the requirements stated in the LDP manifesto.

    Use the standard header with title, author, and date (including a
     version number).  See ``Example 3''

    Lastly, be prepared to receive email questions and comments from
     readers.  How much you help people is up to you but you should make
     use of good suggestions and reports of errors.  You may also get
     some "thank you for writing this" email.


  7.3.  Submitting the HOWTO, etc.

  After you have written the HOWTO, email the SGML source to
  submit@linuxdoc.org.  Then all you need to do is to keep the HOWTO up-
  to date by submitting periodic updates to the same email as you used
  for the first edition.


  8.  More Information

  There's a HOWTO: Linuxdoc-Reference that covers it in much greater
  detail than this mini-HOWTO.



