]> A YANG Data Model for Resource Performance Monitoring Huawei
lixiao33@huawei.com
FiberCop
fabio.peruzzini@fibercop.com
China Unicom
zhengyanlei@chinaunicom.cn
Huawei Technologies
italo.busi@huawei.com
Futurewei Technologies
aihuaguo.ietf@gmail.com
Nokia
victor.lopez@nokia.com
CAICT
zhaoxing@caict.ac.cn
Huawei Technologies
jinmingshuang@huawei.com
Huawei Technologies
yuchaode@huawei.com
Routing CCAMP Working Group next generation unicorn sparkling distributed ledger This document defines a YANG data model for resource Performance Monitoring, applicable to network controllers, which provides the functionalities of retrieval of performance monitoring capabilities, TCA (Threshold Crossing Alert) configuration, current or history performance data retrieval, and performance monitoring task management. About This Document The latest revision of this draft can be found at . Status information for this document may be found at . Discussion of this document takes place on the CCAMP Working Group Working Group mailing list (), which is archived at . Subscribe at . Source for this draft and an issue tracker can be found at .
Introduction Resource performance monitoring is a basic function of network management. By viewing and analyzing the performance data of different resources (such as network element, interface, board, termination point, tunnel termination point) operators can detect the running state of the network in time, quickly resolve real-time problems or identify major risks in advanced , avoiding users' complaints. According to the business requirements stated in , resource performance monitoring requirements include:
  • Retrieval of current and historical performance measurements for network resources
  • Distribution of Threshold Crossing Alerts (TCAs) to the collectors of PM data
  • Control of performance monitoring in the network: enable/disable of PM collection and TCA generation
Currently, there are some existing documents related to performance monitoring in IETF, but there is no overlap with our current work. The relative monitored objects are summarized in Table 1.
YANG Module Performance-Monitored Object Reference
ietf-te-telemetry, ietf-vn-telemetry TE tunnel, virtual network
ietf-network-vpn-pm VPN service topology
ietf-service-pm Transport network service
ietf-lmap-control, ietf-lmap-report massive measurement agents in broadband service
provides a YANG data model that describes performance monitoring and scaling intent mechanisms for TE-Tunnels and Virtual Networks(VNs). defines a YANG data model for performance monitoring of both network topology layer and overlay VPN service topology layer. provides a performance monitoring YANG data model on client signal level. defines a data model for Large-Scale Measurement Platforms(LMAP), focusing on task capability and configuration of massive measurement agents. This document defines a YANG module for resource performance monitoring, which defines the capabilities of resource performance monitoring, the tca configuration model of a specific resource. In addition, the sub-module of monitoring task and a few RPCs are defined to support the operations of performance monitoring, such as data retrieval and controlling the monitoring tasks. The YANG data model defined in this document conforms to the Network Management Datastore Architecture (NMDA) defined in .
Terminology and Notations Refer to and for the key terms used in this document. The following terms are defined in and are not redefined here: * client * server * augment * data model * data node The following terms are defined in and are not redefined here: * configuration data * state data The following terms are defined in and are not redefined here: * CMI * MPI * MDSC * CNC * PNC
  • To Be Added: some explanation of performance indicator
Tree Diagram A simplified graphical representation of the data model is used in Section 3 of this document. The meaning of the symbols in these diagrams are defined in .
Prefix in Data Node Names In this document, names of data nodes and other data model objects are prefixed using the standard prefix associated with the corresponding YANG imported modules, as shown in the following table. Prefixes and corresponding YANG modules
Prefix Yang Module Reference
rpm ietf-resource-pm RFC XXXX
rpm-types ietf-resource-pm-types RFC XXXX
yang ietf-yang-types
RFC Editor Note: Please replace XXXX with the RFC number assigned to this document.
YANG Data Model for Resource Performance Monitoring
Capabilities of Resource Performance Monitoring ### Supported Resources and Corresponding PM Capabilities A generic "resources" structure is defined to describe the objects that could be monitored:
  • "resource": the identifier of a monitored object
  • "resource-type": indicate what exact kind of resource is
  • "holding time": the longest time period that performance data could be monitored
  • "indicator name": the indicators that could be monitored for the resource
  • "sub-resources": the identifier of the performace monitoring point of this resource (e.g., if the resource is a network element, the sub resources may be a list of termination points)
../resource ]]>
Introduction of Performance Indicators It is impossible to list all the PM indicator exhaustively, even if ITU-T and IETF has done a lot of work. Some new performance indicators would be raised once there are some new requirements and technologies. So in this document we would like to provide String type rather than an explicit type for performance indicator, to have a better compatibility for future extension. Then if there are some new indicators, there is no need to revise this document or create a branch of documents to standardize the PM indicators. For optical network, a performance management information table in the session10.2 of lists all the PM current data and history data collected on the EMF(Equipment Management Function). A few indicators of different resources are listed below as an example. // To be added: performance indicators of different resources in optical network. For IP network, a few indicators of different resources are listed below as an example. For a network element, following are possible indicators: * CPU usage. * Memory usage. * Total active routes. * Total active mac entries. For an interface, following are possible indicators: * Ingress unicast packets. * Ingress multicast packets. * Ingress discard packets. * Ingress error packets. * Ingress unknown protocol packets. * Egress unicast packets. * Egress multicast packets. * Egress discard packets. * Egress error packets. For a board, following are possible indicators: * CPU usage. * Memory usage.
Threshold Crossing Alert Control Threshold crossing alert control parameters could be set directly for a resource, or set through applying an existing profile to the resource. Therefore, there are four main requirements for Threshold Crossing Alert Control:
  • Creation/retrieval/deletion/updating of TCA profile;
  • Enabling/disabling TCA reporting on the resource;
  • Configuring TCA on the resource by associating an existing profile;
  • Configuring TCA on the resource by detailed parameters.
To satisfy the above requirements, the module defines "tca-management", including the "profile" structure to enable the preset of tca parameters, "tca" structure to describe the tca parameters (directly set or preset by applying profiles) and tca status of a specific resource. And for the TCA parameters, no matter it is configured directly on the resource or by a preset profile, there should not be any differences. The TCA parameters (tca-indicator) should include:
  • Threshold-type: This threshold type is used to indicate when the alert will be triggered. By exceeding the upper bound value, or by below the lower bound value.
  • Period: This period is used to indicate the frequency of the data collection.
  • Severity: This severity is used to indicate what level of alert would be triggered if cross the threshold.
  • Indicator-value: The value of threshold.
  • Indicator-value-unit: The unit of threshold value.
In addition, the function of enabling/disabling TCA on the resource can be controlled by the "admin-status" attribute in "tca" node. The pre-defined profiles with unique profile id could be applied to "tca" node, shown as "applied-profiles" in "tca" node. /performance-monitoring/resources/resource-list/resource | +--ro resource-type? identityref | +--rw admin-status? enumeration | +--rw applied-profiles | | +--rw profile* [profile-id] | | +--rw profile-id -> ../../../../../profiles/profile/profile-id | +--rw tca-cfg | +--rw tca-indicator* [indicator-name threshold-type period severity] | +--rw indicator-name string | +--rw indicator-value string | +--rw indicator-value-unit string | +--rw threshold-type enumeration | +--rw period identityref | +--rw severity identityref ]]>
Data Retrieval of Resource Performance Monitoring
Get Current/History Performance Monitoring Data For the retrieval of current/history performance data, we consider these data are not suitable to define in a data model. Because performance data can be changed frequently and if we follow that approach, according to the requirement of on-change notification in YANG-push , once the performance data changes, the controller should trigger a notification to the northbound system, there would be great number of notifications reported in the big network. These two retrieval interfaces are usually invoked on-demand. It is also hard to support retrieving performance data of multiple resources by data model in one request. And for history performance data retrieval, there could be a requirement to specify the start time and end time. It is not quite flexible to support this requirement by data model neither. So we suggest to define an RPC to accomplish these two functions. /performance-monitoring/resources/resource-list/resource | | +---w is-requesting-history-data? boolean | | +---w start-time? yang:date-and-time | | +---w end-time? yang:date-and-time | +--ro output | +--ro pm-data | +--ro pm-data-list* [resource] | +--ro resource -> /performance-monitoring/resources/resource-list/resource | +--ro task-id* yang:uuid | +--ro collect-time? yang:date-and-time | +--ro resource-type? identityref | +--ro indicator-data | +--ro indicator-data-list* [indicator-name] | +--ro indicator-name string | +--ro indicator-value? string | +--ro indicator-value-unit? string ]]>
Get Profile Associated Resources For the TCA related definition, it can be found in the previous Section (Section2.2). A TCA profile can be associated with a lot of resources, so we don't defined a resource list under the profile instance to avoid reporting some unnecessary notifications while the resource instances in this list have been changed. We define an RPC operation to support this flexible retrieval request. /performance-monitoring/tca-management/profiles/profile/profile-id +--ro output +--ro resource-list* -> /performance-monitoring/resources/resource-list/resource ]]>
Controlling of Resource Performance Monitoring
Clear Performance Monitoring Data of Specific Resources We define an RPC to enable clearing the performance monitoring data of specified resources. If there are any resources failed to clear performance monitoring data, their identifier should be returned by the failed-resources leaf list. An empty list indicates that this operation was performed successfully. /performance-monitoring/resources/resource-list/resource | +--ro output | +--ro failed-resources* -> /performance-monitoring/resources/resource-list/resource ]]>
Enable/Disable Performance Monitoring To enable/disable performance monitoring data, we introduce a monitor task to do this control. In the monitoring task, the resource, the monitored period, the monitored indicators could be set. The disabling, enabling operation can be satisfied by changing the admin status which includes disabled, enabled. The change's result will affect the task status accordingly.
Resource Performance Monitoring Tree Diagram
Resource Performance Monitoring tree diagram ../resource +--rw tca-management | +--rw profiles | | +--rw profile* [profile-id] | | +--rw profile-id yang:uuid | | +--rw profile-name? string | | +--rw tca-cfg | | +--rw tca-indicator* | | [indicator-name threshold-type period \ severity] | | +--rw indicator-name string | | +--rw indicator-value string | | +--rw indicator-value-unit string | | +--rw threshold-type enumeration | | +--rw period identityref | | +--rw severity identityref | +--rw tcas | +--rw tca* [resource] | +--rw resource leafref | +--ro resource-type? identityref | +--rw admin-status? enumeration | +--rw applied-profiles | | +--rw profile* [profile-id] | | +--rw profile-id leafref | +--rw tca-cfg | +--rw tca-indicator* | [indicator-name threshold-type period \ severity] | +--rw indicator-name string | +--rw indicator-value string | +--rw indicator-value-unit string | +--rw threshold-type enumeration | +--rw period identityref | +--rw severity identityref +--rw monitor-tasks +--rw monitor-task* [task-id] +--rw task-id yang:uuid +--rw resource? leafref +--ro resource-type? identityref +--rw task-name? string +--rw admin-status? enumeration +--ro task-status? enumeration +--rw task-cfg +--rw period? identityref +--rw indicators +--rw indicator* [indicator-name] +--rw indicator-name string +--rw indicator-value-unit? string rpcs: +---x get-pm-data | +---w input | | +---w resources* leafref | | +---w is-requesting-history-data? boolean | | +---w start-time? yang:date-and-time | | +---w end-time? yang:date-and-time | +--ro output | +--ro pm-data | +--ro pm-data-list* [resource] | +--ro resource leafref | +--ro task-id* yang:uuid | +--ro collect-time? yang:date-and-time | +--ro resource-type? identityref | +--ro indicator-data | +--ro indicator-data-list* [indicator-name] | +--ro indicator-name string | +--ro indicator-value? string | +--ro indicator-value-unit? string +---x clear-performance-monitoring-data | +---w input | | +---w resources* leafref | +--ro output | +--ro failed-resources* leafref +---x get-profile-associated-resources +---w input | +---w profile-id? leafref +--ro output +--ro resource-list* leafref ]]>
YANG Model for Resource Performance Monitoring
Resource Performance Monitoring YANG module WG List: Editor: Chaode Yu Editor: Fabio Peruzzini Editor: Yanlei Zheng Editor: Victor Lopez Editor: Italo Busi Editor: Aihua Guo Editor: Xing Zhao Editor: Mingshuang Jin "; description "This module defines a model for resource performance monitoring. The model fully conforms to the Network Management Datastore Architecture (NMDA). Copyright (c) 2025 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Revised BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info). This version of this YANG module is part of RFC XXXX; see the RFC itself for full legal notices. The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document are to be interpreted as described in BCP 14 (RFC 2119) (RFC 8174) when, and only when, they appear in all capitals, as shown here."; revision 2025-07-04 { description "Initial revision."; } container performance-monitoring { description "the root node."; uses resource-info-grouping; uses tca-management-grouping; uses monitoring-tasks-grouping; } grouping resource-info-grouping { description "grouping of resources' PM capabilities related information"; container resources { description "resources' PM capabilities related information"; list resource-list { description "list of resource instances"; key resource; leaf resource { type union { type instance-identifier { require-instance false; } type yang:object-identifier; type string; type yang:uuid; } } leaf resource-type { type identityref { base rpm-types:resource-type; } config false; description "the type of resource, such as NE, board or port"; } leaf holding-time { description "Contains the time period in hours within which 24h PM data records and 15min PM data records may be retrieved. If the domain controller does not store PM data it is the time supported in the NE"; config false; type uint8; units "hour"; } leaf-list indicator-name { type string; config false; } leaf-list sub-resources { description "the identifier of the performace monitoring point of this resource. If the resource is a NE, the sub-resource should be termination point. If the resource is a termination point contained in this NE, the sub-resource should be the logic channel on this TP"; config false; type leafref { path "../rpm:resource"; } } } } } grouping monitoring-tasks-grouping { description "grouping of performance monitoring task"; container monitor-tasks { description "Information of PM tasks"; list monitor-task { description "monitoring task list"; key task-id; uses task-instance-grouping; } } } grouping task-instance-grouping { description "grouping of performance monitoring task. In this monitoring task, the client can specify a resource to run a monitor task and what kind of performance data need to be monitored."; leaf task-id { description "identifier of the performance task"; type yang:uuid; } leaf resource { description "the identifier of network resource on which the performance monitoring task is running"; type leafref { path "/rpm:performance-monitoring/rpm:resources" + "/rpm:resource-list/rpm:resource"; } } leaf resource-type { description "the type of resource, such as NE, board or port"; config false; type identityref { base rpm-types:resource-type; } } leaf task-name { description "the name of monitoring task"; type string; } leaf admin-status { description "it is used to control enbling/disabling PM task"; type enumeration { enum enabled { description "it is used to enable the pm task, if the task is enabled, the task-staus should be running"; } enum disabled { description "it is used to disenable the pm task, if the task is disabled, the task-staus should be suspended"; } } } leaf task-status { config false; description "the status of monitoring task."; type enumeration { enum running; enum suspended; enum abnormal; } } uses task-configuration-grouping; } grouping task-configuration-grouping { description "grouping of pm task configuration"; container task-cfg { description "Configuration of the monitoring task"; leaf period { description "it is used to indicate the interval as per monitoring task"; type identityref { base rpm-types:period; } } container indicators { description "performance indicators"; list indicator { description "list of PM indicators to be monitored"; key indicator-name; uses indicator-grouping; } } } } grouping indicator-grouping { description "grouping of a monitoring indicator instance"; leaf indicator-name { description "performance indicator's name"; type string; } leaf indicator-value-unit { description "unit of indicator value"; type string; } } grouping tca-management-grouping { description "grouping of configuration and management for Threshol Crossing Alert"; container tca-management { description "configuration and management for Threshol Crossing Alert"; container profiles { description "the TCA profile in the whole network"; list profile { description "List of TCA profile instances"; key "profile-id"; uses tca-profile-grouping; } } container tcas { description "TCA configuration on the network resources."; list tca { description "List of TCA configuration instances"; key "resource"; leaf resource { description "the identifier of network resource on which threshold is configured for TCA purpose"; type leafref { path "/rpm:performance-monitoring/rpm:resources" + "/rpm:resource-list/rpm:resource"; } } leaf resource-type { description "the type of resource, such as NE, board or termination point"; config false; type identityref { base rpm-types:resource-type; } } leaf admin-status { description "it is used to control the validity of threshold"; type enumeration { enum enabled { description "if the admin-status of TCA configuration is enabled, the threshold is effective"; } enum disabled { description "if the admin-status of TCA configuration is disabled, the threshold is not effective"; } } } uses tca-grouping; } } } } grouping tca-profile-grouping { description "grouping of TCA profile instance"; leaf profile-id { description "identifier of threshold crossing alerrt profile"; type yang:uuid; } leaf profile-name { description "Name of the threshold crossing alerrt profile"; type string; } container tca-cfg { description "detailed TCA configuration in a profile"; list tca-indicator { description "list of TCA configuration."; key "indicator-name threshold-type period severity"; uses tca-indicator-grouping; } } } grouping tca-indicator-grouping { description "grouping for detail TCA configuration"; leaf indicator-name { type string; description "name of the indicator"; } leaf indicator-value { mandatory true; type string; description "treshold value of the indicator"; } leaf indicator-value-unit { mandatory true; type string; description "unit of indicator's value"; } leaf threshold-type { description "it is used to indicate the trigger/clearing condition of alert upon the threshold"; type enumeration { enum upperbound-trigger { description "If the performace data exceeds this threshold value, a TCA will be triggered"; } enum lowerbound-trigger { description "if the performace data is lower than this threshold value, a TCA will be triggered"; } enum upperbound-clear { description "If the performance data is not longer bigger than this threshold value, the TCA triggered before will be cleared by system automatically"; } enum lowerbound-clear { description "If the performance data is not longer lower than this threshold value, the TCA triggered before will be cleared by system automatically"; } } } leaf period { description "it is used to indicate the interval as per monitoring task"; type identityref { base rpm-types:period; } } leaf severity { description "it is used to indicate what severity level of alert would be triggered if not confirms to the threashold"; type identityref { base rpm-types:severity; } } } grouping tca-grouping { description "grouping of TCA configuration"; container applied-profiles { description "Information of applied TCA profiles on this resource"; list profile { description "list of applied TCA profile"; key "profile-id"; leaf profile-id { description "identifier of the applied TCA profile"; type leafref { path "../../../../../rpm:profiles/rpm:profile" + "/rpm:profile-id"; } } } } container tca-cfg { description "detailed configuration of TCA"; list tca-indicator { description "list of tca indicator configuration"; key "indicator-name threshold-type period severity"; uses tca-indicator-grouping; } } } rpc get-pm-data { input { leaf-list resources { description "the identifier of resources from which performace data is collected"; type leafref { path "/rpm:performance-monitoring/rpm:resources" + "/rpm:resource-list/rpm:resource"; } } leaf is-requesting-history-data { description "true indicate this is a request for historic data, then start-time and end-time should be assigned"; type boolean; } leaf start-time { description "the starttime of performance data needed to be retrieved"; type yang:date-and-time; } leaf end-time { description "the endtime of performance data needed to be retrieved"; type yang:date-and-time; } } output { container pm-data { description "result of historic performance data"; list pm-data-list { description "list of historic performance data"; key resource; uses pm-data-instance-grouping; } } } } rpc clear-performance-monitoring-data { description "This operation clears (reset) the PM registers for a list of Measurement Points. Within the request for each Measurement Point, it is possible to specify the granularity (15min, 24hr, NA) and location (nearEnd and/or farEnd and/or bidirectional) for the PM registers that are to be reset."; input { leaf-list resources { description "the identifier of measurement points to clear PM data"; type leafref { path "/rpm:performance-monitoring/rpm:resources" + "/rpm:resource-list/rpm:resource"; } } } output { leaf-list failed-resources { description "the identifier of measurement points which are failed to clear PM data. An empty list indicates that the total request was successful."; type leafref { path "/rpm:performance-monitoring/rpm:resources" + "/rpm:resource-list/rpm:resource"; } } } } rpc get-profile-associated-resources { input { leaf profile-id { description "the identifier of profile which the client want to retrieve"; type leafref { path "/rpm:performance-monitoring/rpm:tca-management" + "/rpm:profiles/rpm:profile/rpm:profile-id"; } } } output { leaf-list resource-list { description "Provides the set of Resources associated with the profile provided."; type leafref { path "/rpm:performance-monitoring/rpm:resources" + "/rpm:resource-list/rpm:resource"; } } } } grouping pm-data-instance-grouping { description "grouping for common attributes of performance data"; leaf resource { description "the identifier of network resource which is monitored."; type leafref { path "/rpm:performance-monitoring/rpm:resources" + "/rpm:resource-list/rpm:resource"; } } leaf-list task-id { description "the task id list of the tasks from which the pm data is retrieved"; type yang:uuid; } leaf collect-time { description "the time of this data is collected"; type yang:date-and-time; } leaf resource-type { description "the type of resource, such as NE, board or port"; type identityref { base rpm-types:resource-type; } } container indicator-data { description "grouping for historic performance data"; list indicator-data-list { description "list of historic performance data"; key indicator-name; uses indicator-data-instance-grouping; } } } grouping indicator-data-instance-grouping { description "grouping for a performance data"; leaf indicator-name { description "name of performance data indicator"; type string; } leaf indicator-value { description "value of performance data"; type string; } leaf indicator-value-unit { description "unit of performance data value"; type string; } } } ]]>
YANG Model for Resource Performance Monitoring Types
Resource Performance Monitoring Types YANG module WG List: Editor: Chaode Yu Editor: Fabio Peruzzini Editor: Yanlei Zheng Editor: Victor Lopez Editor: Italo Busi Editor: Aihua Guo Editor: Xing Zhao Editor: Mingshuang Jin "; description "This module defines types model for resource performance monitoring which will be imported by ietf-resource-pm data model. The model fully conforms to the Network Management Datastore Architecture (NMDA). Copyright (c) 2025 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Revised BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info). This version of this YANG module is part of RFC XXXX; see the RFC itself for full legal notices. The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document are to be interpreted as described in BCP 14 (RFC 2119) (RFC 8174) when, and only when, they appear in all capitals, as shown here."; revision 2025-07-04 { description "Initial revision."; } identity resource-type { description "this is the base type of all the rerource type"; } identity network-element { base resource-type; description "NE resource type"; } identity interface { base resource-type; description "Network interface"; } identity board { base resource-type; description "board resource type"; } identity termination-point { base resource-type; description "Termination point resource"; } identity tunnel-termination-point { base resource-type; description "Tunnel termination point resource"; } identity period { description "this is the base type of all the performace monitoring priod type."; } identity period-15-minutes { base period; description "the during of monitoring task will be repeated at every 15 minutes"; } identity period-24-hours { base period; description "the during of monitoring task will be repeated at every 24 hours"; } identity severity { description "it is used to indicate what severity alarm will be caused if exceeds the threshold"; } identity critical { description "critical alarm will be caused if exceeds the threshold"; base severity; } identity major { description "major alarm will be caused if exceeds the threshold"; base severity; } identity minor { description "minor alarm will be caused if exceeds the threshold"; base severity; } identity warning { description "only a warning will be caused if exceeds the threshold"; base severity; } identity layer-rate-type { description "It is used to indicate the layer rate of network element when retrieving the pm parameters supported"; } } ]]>
Manageability Considerations <Add any manageability considerations>
Security Considerations The YANG module specified in this document defines a schema for data that is designed to be accessed via network management protocols such as NETCONF or RESTCONF . The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) . The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS . The NETCONF access control model provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content. There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. Considerations in Section 8 of are also applicable to their subtrees in the module defined in this document. Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. Considerations in Section 8 of are also applicable to their subtrees in the module defined in this document.
IANA Considerations This document registers following YANG modules in the YANG Module Names registry . name: ietf-resource-pm namespace: urn:ietf:params:xml:ns:yang:ietf-resource-pm prefix: dvcrpm reference: RFC XXXX: A YANG Data Model for Resource Performance Monitoring name: ietf-resource-pm-types namespace: urn:ietf:params:xml:ns:yang:ietf-resource-pm-types prefix: dvcrpm-types reference: RFC XXXX: A YANG Data Model for Resource Performance Monitoring
References Normative References Resource Performance Management TM Forum (TMF) Management aspects of optical transport network elements International Telecommunication Union A YANG Data Model for Network and VPN Service Performance Monitoring The data model for network topologies defined in RFC 8345 introduces vertical layering relationships between networks that can be augmented to cover network and service topologies. This document defines a YANG module for performance monitoring (PM) of both underlay networks and overlay VPN services that can be used to monitor and manage network performance on the topology of both layers. A YANG Data Model for LMAP Measurement Agents This document defines a data model for Large-Scale Measurement Platforms (LMAPs). The data model is defined using the YANG data modeling language. Network Management Datastore Architecture (NMDA) Datastores are a fundamental concept binding the data models written in the YANG data modeling language to network management protocols such as the Network Configuration Protocol (NETCONF) and RESTCONF. This document defines an architectural framework for datastores based on the experience gained with the initial simpler model, addressing requirements that were not well supported in the initial model. This document updates RFC 7950. Routing and Wavelength Assignment Information Model for Wavelength Switched Optical Networks This document provides a model of information needed by the Routing and Wavelength Assignment (RWA) process in Wavelength Switched Optical Networks (WSONs). The purpose of the information described in this model is to facilitate constrained optical path computation in WSONs. This model takes into account compatibility constraints between WSON signal attributes and network elements but does not include constraints due to optical impairments. Aspects of this information that may be of use to other technologies utilizing a GMPLS control plane are discussed. Routing and Wavelength Assignment Information Encoding for Wavelength Switched Optical Networks A Wavelength Switched Optical Network (WSON) requires certain key information fields be made available to facilitate path computation and the establishment of Label Switched Paths (LSPs). The information model described in "Routing and Wavelength Assignment Information Model for Wavelength Switched Optical Networks" (RFC 7446) shows what information is required at specific points in the WSON. Part of the WSON information model contains aspects that may be of general applicability to other technologies, while other parts are specific to WSONs. This document provides efficient, protocol-agnostic encodings for the WSON-specific information fields. It is intended that protocol- specific documents will reference this memo to describe how information is carried for specific uses. Such encodings can be used to extend GMPLS signaling and routing protocols. In addition, these encodings could be used by other mechanisms to convey this same information to a Path Computation Element (PCE). The YANG 1.1 Data Modeling Language YANG is a data modeling language used to model configuration data, state data, Remote Procedure Calls, and notifications for network management protocols. This document describes the syntax and semantics of version 1.1 of the YANG language. YANG version 1.1 is a maintenance release of the YANG language, addressing ambiguities and defects in the original specification. There are a small number of backward incompatibilities from YANG version 1. This document also specifies the YANG mappings to the Network Configuration Protocol (NETCONF). Network Configuration Protocol (NETCONF) The Network Configuration Protocol (NETCONF) defined in this document provides mechanisms to install, manipulate, and delete the configuration of network devices. It uses an Extensible Markup Language (XML)-based data encoding for the configuration data as well as the protocol messages. The NETCONF protocol operations are realized as remote procedure calls (RPCs). This document obsoletes RFC 4741. [STANDARDS-TRACK] YANG Tree Diagrams This document captures the current syntax used in YANG module tree diagrams. The purpose of this document is to provide a single location for this definition. This syntax may be updated from time to time based on the evolution of the YANG language. Common YANG Data Types This document introduces a collection of common data types to be used with the YANG data modeling language. This document obsoletes RFC 6021. RESTCONF Protocol This document describes an HTTP-based protocol that provides a programmatic interface for accessing data defined in YANG, using the datastore concepts defined in the Network Configuration Protocol (NETCONF). Using the NETCONF Protocol over Secure Shell (SSH) This document describes a method for invoking and running the Network Configuration Protocol (NETCONF) within a Secure Shell (SSH) session as an SSH subsystem. This document obsoletes RFC 4742. [STANDARDS-TRACK] The Transport Layer Security (TLS) Protocol Version 1.3 This document specifies version 1.3 of the Transport Layer Security (TLS) protocol. TLS allows client/server applications to communicate over the Internet in a way that is designed to prevent eavesdropping, tampering, and message forgery. This document updates RFCs 5705 and 6066, and obsoletes RFCs 5077, 5246, and 6961. This document also specifies new requirements for TLS 1.2 implementations. Network Configuration Access Control Model The standardization of network configuration interfaces for use with the Network Configuration Protocol (NETCONF) or the RESTCONF protocol requires a structured and secure operating environment that promotes human usability and multi-vendor interoperability. There is a need for standard mechanisms to restrict NETCONF or RESTCONF protocol access for particular users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content. This document defines such an access control model. This document obsoletes RFC 6536. YANG Data Model for Traffic Engineering (TE) Topologies This document defines a YANG data model for representing, retrieving, and manipulating Traffic Engineering (TE) Topologies. The model serves as a base model that other technology-specific TE topology models can augment. YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF) YANG is a data modeling language used to model configuration and state data manipulated by the Network Configuration Protocol (NETCONF), NETCONF remote procedure calls, and NETCONF notifications. [STANDARDS-TRACK] Informative References YANG models for Virtual Network (VN)/TE Performance Monitoring Telemetry and Scaling Intent Autonomics Huawei Lancaster University CTTC Huawei Technologies Cisco This document provides YANG data models that describe the performance monitoring parameters and scaling intent mechanisms for Traffic Engineering (TE) tunnels and Virtual Networks (VNs). Their performance monitoring parameters are exposed as the key telemetry data for tunnels and VNs. The models presented in this document allow customers to subscribe to and monitor the key performance data of the TE-tunnel or the VN. The models also provide customers with the ability to program autonomic scaling intent mechanisms on the level of TE-tunnel as well as VN. A YANG Data Model for Client Signal Performance Monitoring Huawei Technologies Huawei Technologies Huawei Technologies China Unicom Nokia Telefonica A transport network is a server-layer network to provide connectivity services to its client. Given the client signal is configured, the followup function for performance monitoring, such as latency and bit error rate, would be needed for network operation. This document describes the data model to support the performance monitoring functionalities. A YANG Data Model for Network and VPN Service Performance Monitoring Huawei Huawei Orange Telefonica Comcast The data model for network topologies defined in RFC 8345 introduces vertical layering relationships between networks that can be augmented to cover network and service topologies. This document defines a YANG module for performance monitoring (PM) of both underlay networks and overlay VPN services that can be used to monitor and manage network performance on the topology of both layers. Information Model for Abstraction and Control of TE Networks (ACTN) This document provides an information model for Abstraction and Control of TE Networks (ACTN). Subscription to YANG Notifications for Datastore Updates This document describes a mechanism that allows subscriber applications to request a continuous and customized stream of updates from a YANG datastore. Providing such visibility into updates enables new capabilities based on the remote mirroring and monitoring of configuration and operational state.
Acknowledgments This document was prepared using kramdown.