<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="zh_CN">
<context>
    <name>QObject</name>
    <message>
        <location filename="../qtractorAudioClip.cpp" line="754"/>
        <source>
Audio:	%1 channels, %2 Hz</source>
        <translation>
音频：	%1 声道，%2 Hz</translation>
    </message>
    <message>
        <location filename="../qtractorAudioClip.cpp" line="759"/>
        <source> (%1 dB)</source>
        <translation> (%1 dB)</translation>
    </message>
    <message>
        <location filename="../qtractorAudioClip.cpp" line="763"/>
        <source> (%1 pan)</source>
        <translation> (%1 声像)</translation>
    </message>
    <message>
        <location filename="../qtractorAudioClip.cpp" line="766"/>
        <source>
	(%1% time stretch)</source>
        <translation>
	(%1% 时间拉伸)</translation>
    </message>
    <message>
        <location filename="../qtractorAudioClip.cpp" line="769"/>
        <source>
	(%1 semitones pitch shift)</source>
        <translation>
	(%1 半音 移调)</translation>
    </message>
    <message>
        <location filename="../qtractorAudioEngine.cpp" line="2863"/>
        <location filename="../qtractorAudioEngine.cpp" line="3118"/>
        <location filename="../qtractorMidiEngine.cpp" line="4054"/>
        <location filename="../qtractorMidiEngine.cpp" line="4593"/>
        <source>%1 In</source>
        <translation>%1 输入</translation>
    </message>
    <message>
        <location filename="../qtractorAudioEngine.cpp" line="2872"/>
        <location filename="../qtractorAudioEngine.cpp" line="3118"/>
        <location filename="../qtractorMidiEngine.cpp" line="4063"/>
        <location filename="../qtractorMidiEngine.cpp" line="4593"/>
        <source>%1 Out</source>
        <translation>%1 输出</translation>
    </message>
    <message>
        <location filename="../qtractorAudioFile.cpp" line="136"/>
        <source>Audio files (%1)</source>
        <translation>音频文件 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorAudioFile.cpp" line="137"/>
        <location filename="../qtractorVst2Plugin.cpp" line="1591"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorAudioListView.cpp" line="91"/>
        <source>%1 (%2)
%3 channels, %4 frames, %5 Hz
%6</source>
        <translation>%1 (%2)
%3 声道，%4 帧，%5 Hz
%6</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="75"/>
        <source>Duplex</source>
        <translation>双工</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="78"/>
        <source>Output</source>
        <translation>输出</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="81"/>
        <source>Input</source>
        <translation>输入</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="85"/>
        <location filename="../qtractorTimeScale.cpp" line="747"/>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="166"/>
        <source> (take %1/%2)</source>
        <translation> (片段 %1/%2)</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="158"/>
        <source>[Mute] </source>
        <translation>[静音]</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="564"/>
        <source>Name:	%1</source>
        <translation>名称：	%1</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="572"/>
        <source>Start:	%1	Offset:	%2
End:	%3	Length:	%4</source>
        <translation>开始：	%1	偏移：	%2
结束：	%3	长度：	%4</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="580"/>
        <source>File:	%1</source>
        <translation>文件：	%1</translation>
    </message>
    <message>
        <location filename="../qtractorClipCommand.cpp" line="923"/>
        <source>take %1</source>
        <translation>片段 %1</translation>
    </message>
    <message>
        <location filename="../qtractorClipCommand.cpp" line="925"/>
        <source>reset takes</source>
        <translation>重置片段</translation>
    </message>
    <message>
        <location filename="../qtractorClipCommand.cpp" line="1197"/>
        <source>clip save</source>
        <translation>保存剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorClipCommand.cpp" line="1220"/>
        <source>clip unlink</source>
        <translation>取消链接剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorClipCommand.cpp" line="1248"/>
        <source>clip tool %1</source>
        <translation>剪辑工具 %1</translation>
    </message>
    <message>
        <location filename="../qtractorClipCommand.cpp" line="1392"/>
        <source>clip record</source>
        <translation>录制剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="113"/>
        <source>automation select</source>
        <translation>自动化选择</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="140"/>
        <source>automation mode</source>
        <translation>自动化模式</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="168"/>
        <source>automation play</source>
        <translation>自动化播放</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="197"/>
        <location filename="../qtractorCurveCommand.cpp" line="535"/>
        <source>automation record</source>
        <translation>自动化录制</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="226"/>
        <source>automation logarithmic</source>
        <translation>自动化对数</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="253"/>
        <source>automation color</source>
        <translation>自动化颜色</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="280"/>
        <source>automation play all</source>
        <translation>自动化播放 (全部)</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="309"/>
        <source>automation record all</source>
        <translation>自动化录制 (全部)</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="344"/>
        <source>automation edit</source>
        <translation>自动化编辑</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="406"/>
        <source>automation clear</source>
        <translation>自动化清除</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="423"/>
        <source>automation clear all</source>
        <translation>自动化清除 (全部)</translation>
    </message>
    <message>
        <location filename="../qtractorCurveCommand.cpp" line="476"/>
        <source>automation edit list</source>
        <translation>自动化编辑列表</translation>
    </message>
    <message>
        <location filename="../qtractorEngine.cpp" line="505"/>
        <location filename="../qtractorTrack.cpp" line="710"/>
        <source>%1 Monitor</source>
        <translation>%1 监听</translation>
    </message>
    <message>
        <location filename="../qtractorEngineCommand.cpp" line="587"/>
        <source>create bus</source>
        <translation>创建总线</translation>
    </message>
    <message>
        <location filename="../qtractorEngineCommand.cpp" line="609"/>
        <source>update bus</source>
        <translation>更新总线</translation>
    </message>
    <message>
        <location filename="../qtractorEngineCommand.cpp" line="626"/>
        <source>delete bus</source>
        <translation>删除总线</translation>
    </message>
    <message>
        <location filename="../qtractorEngineCommand.cpp" line="649"/>
        <source>move bus</source>
        <translation>移动总线</translation>
    </message>
    <message>
        <location filename="../qtractorEngineCommand.cpp" line="697"/>
        <source>bus pass-through</source>
        <translation>总线直通</translation>
    </message>
    <message>
        <location filename="../qtractorEngineCommand.cpp" line="743"/>
        <source>bus gain</source>
        <translation>总线增益</translation>
    </message>
    <message>
        <location filename="../qtractorEngineCommand.cpp" line="820"/>
        <source>bus pan</source>
        <translation>总线声像</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="376"/>
        <source>Insert Send/Return pseudo-plugin (Audio)</source>
        <translation>插入发送/返回伪插件 (音频)</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="438"/>
        <source>Insert Send/Return pseudo-plugin (MIDI)</source>
        <translation>插入发送/返回伪插件 (MIDI)</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="482"/>
        <location filename="../qtractorInsertPlugin.cpp" line="850"/>
        <location filename="../qtractorInsertPlugin.cpp" line="1341"/>
        <location filename="../qtractorInsertPlugin.cpp" line="1679"/>
        <source>Send Gain</source>
        <translation>发送增益</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="490"/>
        <location filename="../qtractorInsertPlugin.cpp" line="858"/>
        <source>Dry Gain</source>
        <translation>干声增益</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="498"/>
        <location filename="../qtractorInsertPlugin.cpp" line="866"/>
        <source>Wet Gain</source>
        <translation>湿声增益</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="582"/>
        <source>Latency (frames)</source>
        <translation>延迟 (帧)</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="824"/>
        <source>%1 ms</source>
        <translation>%1 毫秒</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="1205"/>
        <source>Aux Send (Audio)</source>
        <translation>辅助发送 (音频)</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="1238"/>
        <source>Aux Send pseudo-plugin (Audio)</source>
        <translation>辅助发送伪插件 (音频)</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="1300"/>
        <source>Aux Send pseudo-plugin (MIDI)</source>
        <translation>辅助发送伪插件 (MIDI)</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="1549"/>
        <location filename="../qtractorInsertPlugin.cpp" line="1847"/>
        <source>(none)</source>
        <translation>(无)</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="789"/>
        <location filename="../qtractorInsertPlugin.cpp" line="1550"/>
        <source>%1 (Audio)</source>
        <translation>%1 (音频)</translation>
    </message>
    <message>
        <location filename="../qtractorInsertPlugin.cpp" line="1148"/>
        <location filename="../qtractorInsertPlugin.cpp" line="1848"/>
        <location filename="../qtractorMidiControlPlugin.cpp" line="569"/>
        <source>%1 (MIDI)</source>
        <translation>%1 (MIDI)</translation>
    </message>
    <message>
        <location filename="../qtractorInstrument.cpp" line="511"/>
        <source>Cakewalk Instrument Definition File</source>
        <translation>Cakewalk 乐器定义文件</translation>
    </message>
    <message>
        <location filename="../qtractorInstrument.cpp" line="513"/>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <location filename="../qtractorInstrument.cpp" line="515"/>
        <source>Date</source>
        <translation>日期</translation>
    </message>
    <message>
        <location filename="../qtractorInstrument.cpp" line="737"/>
        <source>%1 Bank %2</source>
        <translation>%1 音色库 %2</translation>
    </message>
    <message>
        <location filename="../qtractorMidiManager.cpp" line="1601"/>
        <source>%1 - Bank %2</source>
        <translation>%1 - 音色库 %2</translation>
    </message>
    <message>
        <location filename="../qtractorMidiClip.cpp" line="1291"/>
        <source>(format %1)
MIDI:	</source>
        <translation>(格式 %1)
MIDI：	</translation>
    </message>
    <message>
        <location filename="../qtractorMidiClip.cpp" line="1293"/>
        <location filename="../qtractorMidiListView.cpp" line="73"/>
        <source>Channel %1</source>
        <translation>通道 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiClip.cpp" line="1295"/>
        <location filename="../qtractorMidiListView.cpp" line="67"/>
        <source>Track %1</source>
        <translation>轨道 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiClip.cpp" line="1298"/>
        <source>, %1 tracks, %2 tpqn</source>
        <translation>，%1 轨道，%2 tpqn</translation>
    </message>
    <message>
        <location filename="../qtractorMidiClip.cpp" line="1305"/>
        <source> (%1% vol)</source>
        <translation> (%1% 音量)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiClip.cpp" line="1341"/>
        <source>MIDI file save: &quot;%1&quot;, track-channel: %2.</source>
        <translation>MIDI 文件保存：&quot;%1&quot;，轨道-通道：%2。</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlCommand.h" line="71"/>
        <source>set controller</source>
        <translation>设置控制器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlCommand.h" line="93"/>
        <source>reset controller</source>
        <translation>重置控制器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="82"/>
        <source>%1 (format %2)
%3 tracks, %4 tpqn
%5</source>
        <translation>%1 (格式 %2)
%3 轨道, %4 tpqn
%5</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="114"/>
        <source>%1 (format %2)
%3</source>
        <translation>%1 (格式 %2)
%3</translation>
    </message>
    <message>
        <location filename="../qtractorMidiTimer.cpp" line="66"/>
        <location filename="../qtractorPlugin.cpp" line="272"/>
        <source>(default)</source>
        <translation>(默认)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiTimer.cpp" line="104"/>
        <source>%1 Hz</source>
        <translation>%1 Hz</translation>
    </message>
    <message>
        <location filename="../qtractorMidiTimer.cpp" line="106"/>
        <source>slave</source>
        <translation>从属</translation>
    </message>
    <message>
        <location filename="../qtractorMidiTimer.cpp" line="108"/>
        <source>%1 (%2)</source>
        <translation>%1 (%2)</translation>
    </message>
    <message>
        <location filename="../qtractorOptions.cpp" line="798"/>
        <source>Usage: %1 [options] [session-file]</source>
        <translation>用法：%1 [选项] [工程文件]</translation>
    </message>
    <message>
        <location filename="../qtractorOptions.cpp" line="801"/>
        <source>Options:</source>
        <translation>选项：</translation>
    </message>
    <message>
        <location filename="../qtractorOptions.cpp" line="804"/>
        <location filename="../qtractorOptions.cpp" line="831"/>
        <source>Set session identification (uuid)</source>
        <translation>设置工程标识 (uuid)</translation>
    </message>
    <message>
        <location filename="../qtractorOptions.cpp" line="807"/>
        <source>Show help about command line options</source>
        <translation>显示命令行选项帮助</translation>
    </message>
    <message>
        <location filename="../qtractorOptions.cpp" line="809"/>
        <source>Show version information</source>
        <translation>显示版本信息</translation>
    </message>
    <message>
        <location filename="../qtractorOptions.cpp" line="834"/>
        <source>Displays help on command-line options.</source>
        <translation>显示命令行选项帮助。</translation>
    </message>
    <message>
        <location filename="../qtractorOptions.cpp" line="837"/>
        <source>Session file (.qtr)</source>
        <translation>工程文件 (.qtr)</translation>
    </message>
    <message>
        <location filename="../qtractorOptions.cpp" line="838"/>
        <source>[session-file]</source>
        <translation>[工程文件]</translation>
    </message>
    <message>
        <location filename="../qtractorOptions.cpp" line="873"/>
        <location filename="../qtractorOptions.cpp" line="916"/>
        <source>Option -s requires an argument (uuid).</source>
        <translation>选项 -s 需要一个参数 (uuid)。</translation>
    </message>
    <message>
        <location filename="../qtractorComboBox.cpp" line="125"/>
        <source>Signed 16-Bit</source>
        <translation>有符号 16 位</translation>
    </message>
    <message>
        <location filename="../qtractorComboBox.cpp" line="126"/>
        <source>Signed 24-Bit</source>
        <translation>有符号 24 位</translation>
    </message>
    <message>
        <location filename="../qtractorComboBox.cpp" line="127"/>
        <source>Signed 32-Bit</source>
        <translation>有符号 32 位</translation>
    </message>
    <message>
        <location filename="../qtractorComboBox.cpp" line="128"/>
        <source>Float  32-Bit</source>
        <translation>浮点 32 位</translation>
    </message>
    <message>
        <location filename="../qtractorComboBox.cpp" line="129"/>
        <source>Float  64-Bit</source>
        <translation>浮点 64 位</translation>
    </message>
    <message>
        <location filename="../qtractorComboBox.cpp" line="146"/>
        <source>SMF Format 0</source>
        <translation>SMF 格式 0</translation>
    </message>
    <message>
        <location filename="../qtractorComboBox.cpp" line="147"/>
        <source>SMF Format 1</source>
        <translation>SMF 格式 1</translation>
    </message>
    <message>
        <location filename="../qtractorPlugin.cpp" line="263"/>
        <source>(Any)</source>
        <translation>(任意)</translation>
    </message>
    <message>
        <location filename="../qtractorPlugin.cpp" line="294"/>
        <source>Activate</source>
        <translation>激活</translation>
    </message>
    <message>
        <location filename="../qtractorPlugin.cpp" line="611"/>
        <source>Aux Send: %1</source>
        <translation>辅助发送：%1</translation>
    </message>
    <message>
        <location filename="../qtractorPlugin.cpp" line="2516"/>
        <source>%1(%2): %3 plugin not found.</source>
        <translation>%1(%2)：未找到插件 %3。</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="121"/>
        <source>add plugin</source>
        <translation>添加插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="145"/>
        <source>add insert</source>
        <translation>添加插入</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="169"/>
        <source>add aux-send</source>
        <translation>添加辅助发送</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="193"/>
        <source>add MIDI controller</source>
        <translation>添加 MIDI 控制器</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="217"/>
        <source>aux-send bus</source>
        <translation>辅助发送总线</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="266"/>
        <source>aux-send matrix</source>
        <translation>辅助发送矩阵</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="308"/>
        <source>remove plugin</source>
        <translation>移除插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="414"/>
        <source>move plugin</source>
        <translation>移动插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="544"/>
        <source>activate plugin</source>
        <translation>激活插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="580"/>
        <source>preset plugin</source>
        <translation>插件预设</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="627"/>
        <source>reset plugin</source>
        <translation>重置插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="677"/>
        <source>plugin program</source>
        <translation>插件程序</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="723"/>
        <source>plugin alias</source>
        <translation>插件别名</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="956"/>
        <source>dedicated audio outputs</source>
        <translation>专用音频输出</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="1001"/>
        <source>direct access param</source>
        <translation>直接访问参数</translation>
    </message>
    <message>
        <location filename="../qtractorPluginCommand.cpp" line="1033"/>
        <source>import plugins</source>
        <translation>导入插件</translation>
    </message>
    <message>
        <location filename="../qtractorSessionCommand.cpp" line="52"/>
        <source>session loop</source>
        <translation>工程循环</translation>
    </message>
    <message>
        <location filename="../qtractorSessionCommand.cpp" line="99"/>
        <source>session punch</source>
        <translation>工程插入录音</translation>
    </message>
    <message>
        <location filename="../qtractorSessionCommand.cpp" line="146"/>
        <source>session properties</source>
        <translation>工程属性</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="750"/>
        <source>Beat</source>
        <translation>拍</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="482"/>
        <source>add tempo node</source>
        <translation>添加速度节点</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="502"/>
        <source>update tempo node</source>
        <translation>更新速度节点</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="520"/>
        <source>remove tempo node</source>
        <translation>移除速度节点</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="537"/>
        <source>move tempo node</source>
        <translation>移动速度节点</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="713"/>
        <source>add marker</source>
        <translation>添加标记</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="732"/>
        <source>update marker</source>
        <translation>更新标记</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="750"/>
        <source>remove marker</source>
        <translation>移除标记</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="769"/>
        <source>add key signature</source>
        <translation>添加调号</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="788"/>
        <source>update key signature</source>
        <translation>更新调号</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="806"/>
        <source>remove key signature</source>
        <translation>移除调号</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="823"/>
        <source>move marker</source>
        <translation>移动标记</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleCommand.cpp" line="957"/>
        <source>change time-sig.</source>
        <translation>更改拍号</translation>
    </message>
    <message>
        <location filename="../qtractorMidiClip.cpp" line="1818"/>
        <source>step input</source>
        <translation>步进输入</translation>
    </message>
    <message>
        <location filename="../qtractorMidiClip.cpp" line="1818"/>
        <source>overdub</source>
        <translation>叠加录音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEngine.cpp" line="4056"/>
        <location filename="../qtractorMidiEngine.cpp" line="4065"/>
        <location filename="../qtractorTrack.cpp" line="718"/>
        <source>%1 Volume</source>
        <translation>%1 音量</translation>
    </message>
    <message>
        <location filename="../qtractorAudioEngine.cpp" line="2865"/>
        <location filename="../qtractorAudioEngine.cpp" line="2874"/>
        <location filename="../qtractorTrack.cpp" line="721"/>
        <source>%1 Gain</source>
        <translation>%1 增益</translation>
    </message>
    <message>
        <location filename="../qtractorAudioEngine.cpp" line="2867"/>
        <location filename="../qtractorAudioEngine.cpp" line="2876"/>
        <location filename="../qtractorMidiEngine.cpp" line="4058"/>
        <location filename="../qtractorMidiEngine.cpp" line="4067"/>
        <location filename="../qtractorTrack.cpp" line="724"/>
        <source>%1 Pan</source>
        <translation>%1 声像</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="212"/>
        <source>add track</source>
        <translation>添加轨道</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="236"/>
        <source>remove track</source>
        <translation>移除轨道</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="261"/>
        <source>duplicate track</source>
        <translation>复制轨道</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="523"/>
        <source>move track</source>
        <translation>移动轨道</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="602"/>
        <source>resize track</source>
        <translation>调整轨道大小</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="649"/>
        <source>import track</source>
        <translation>导入轨道</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="736"/>
        <source>track properties</source>
        <translation>轨道属性</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="794"/>
        <source>Track assignment failed:

Track: &quot;%1&quot; Input: &quot;%2&quot; Output: &quot;%3&quot;</source>
        <translation>轨道分配失败：

轨道：&quot;%1&quot; 输入：&quot;%2&quot; 输出：&quot;%3&quot;</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="873"/>
        <source>track record</source>
        <translation>轨道录音</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="876"/>
        <source>track mute</source>
        <translation>轨道静音</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="879"/>
        <source>track solo</source>
        <translation>轨道独奏</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="1056"/>
        <source>track monitor</source>
        <translation>轨道监听</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="1164"/>
        <source>track gain</source>
        <translation>轨道增益</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="1253"/>
        <source>track pan</source>
        <translation>轨道声像</translation>
    </message>
    <message>
        <location filename="../qtractorTrackCommand.cpp" line="1340"/>
        <source>track instrument</source>
        <translation>轨道乐器</translation>
    </message>
    <message>
        <location filename="../qtractorTrackList.cpp" line="109"/>
        <source>Automation (%1)</source>
        <translation>自动化 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackList.cpp" line="117"/>
        <source>none</source>
        <translation>无</translation>
    </message>
    <message>
        <location filename="../qtractorTrackList.cpp" line="251"/>
        <source>Automation</source>
        <translation>自动化</translation>
    </message>
    <message>
        <location filename="../qtractorTrackList.cpp" line="550"/>
        <source>Unknown</source>
        <translation>未知</translation>
    </message>
    <message>
        <location filename="../qtractorVst2Plugin.cpp" line="655"/>
        <source>Product: </source>
        <translation>产品：</translation>
    </message>
    <message>
        <location filename="../qtractorClapPlugin.cpp" line="562"/>
        <location filename="../qtractorVst2Plugin.cpp" line="663"/>
        <location filename="../qtractorVst3Plugin.cpp" line="1331"/>
        <source>Vendor: </source>
        <translation>厂商：</translation>
    </message>
    <message>
        <location filename="../qtractorClapPlugin.cpp" line="575"/>
        <source>Manual: </source>
        <translation>手册：</translation>
    </message>
    <message>
        <location filename="../qtractorClapPlugin.cpp" line="581"/>
        <source>Support: </source>
        <translation>支持：</translation>
    </message>
    <message>
        <location filename="../qtractorClapPlugin.cpp" line="546"/>
        <location filename="../qtractorVst2Plugin.cpp" line="671"/>
        <location filename="../qtractorVst3Plugin.cpp" line="1304"/>
        <source>Version: </source>
        <translation>版本：</translation>
    </message>
    <message>
        <location filename="../qtractorVst2Plugin.cpp" line="1588"/>
        <source>%1 (*.%2)</source>
        <translation>%1 (*.%2)</translation>
    </message>
    <message>
        <location filename="../qtractorLadspaPlugin.cpp" line="149"/>
        <source>Copyright: </source>
        <translation>版权：</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="2186"/>
        <source>Project: </source>
        <translation>项目：</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3423"/>
        <source>Select plug-in&apos;s editor (GUI):</source>
        <translation>选择插件编辑器 (GUI)：</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3435"/>
        <source>External</source>
        <translation>外部</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3438"/>
        <source>X11</source>
        <translation>X11</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3441"/>
        <source>X11 (native)</source>
        <translation>X11 (原生)</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3444"/>
        <source>Gtk2</source>
        <translation>Gtk2</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3447"/>
        <source>Gtk2 (native)</source>
        <translation>Gtk2 (原生)</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3451"/>
        <source>Qt5</source>
        <translation>Qt5</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3455"/>
        <source>Qt6</source>
        <translation>Qt6</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3460"/>
        <source>Other</source>
        <translation>其他</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3468"/>
        <source>Don&apos;t ask this again</source>
        <translation>不再询问</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="3854"/>
        <source>plugin parameters</source>
        <translation>插件参数</translation>
    </message>
    <message>
        <location filename="../qtractorLv2Plugin.cpp" line="4281"/>
        <source>Open File</source>
        <comment>lv2_ui_request_parameter</comment>
        <translation>打开文件</translation>
    </message>
    <message>
        <location filename="../qtractorLadspaPlugin.cpp" line="143"/>
        <location filename="../qtractorLv2Plugin.cpp" line="2194"/>
        <source>Author: </source>
        <translation>作者：</translation>
    </message>
    <message>
        <location filename="../qtractorCurveFile.cpp" line="228"/>
        <source>%1: Automation/curve file not found.</source>
        <translation>%1：未找到自动化/曲线文件。</translation>
    </message>
    <message>
        <location filename="../qtractorClapPlugin.cpp" line="540"/>
        <location filename="../qtractorVst3Plugin.cpp" line="1298"/>
        <source>Name: </source>
        <translation>名称：</translation>
    </message>
    <message>
        <location filename="../qtractorVst3Plugin.cpp" line="1318"/>
        <source>Category: </source>
        <translation>类别：</translation>
    </message>
    <message>
        <location filename="../qtractorVst3Plugin.cpp" line="1325"/>
        <source>Categories: </source>
        <translation>类别：</translation>
    </message>
    <message>
        <location filename="../qtractorTrack.cpp" line="711"/>
        <source>%1 Record</source>
        <translation>%1 录音</translation>
    </message>
    <message>
        <location filename="../qtractorTrack.cpp" line="712"/>
        <source>%1 Mute</source>
        <translation>%1 静音</translation>
    </message>
    <message>
        <location filename="../qtractorTrack.cpp" line="713"/>
        <source>%1 Solo</source>
        <translation>%1 独奏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="597"/>
        <source>MIDI Controller: %1, %2, %3</source>
        <translation>MIDI 控制器：%1, %2, %3</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPlugin.cpp" line="75"/>
        <source>Control (MIDI)</source>
        <translation>控制器 (MIDI)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPlugin.cpp" line="108"/>
        <source>MIDI Controller Send pseudo-plugin</source>
        <translation>MIDI 控制器发送伪插件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPlugin.cpp" line="141"/>
        <source>Value</source>
        <translation>值</translation>
    </message>
</context>
<context>
    <name>qtractorAudioIOMatrixForm</name>
    <message>
        <location filename="../qtractorAudioIOMatrixForm.ui" line="39"/>
        <source>Aux-Send I/O Matrix</source>
        <translation>辅助发送 I/O 矩阵</translation>
    </message>
    <message>
        <location filename="../qtractorAudioIOMatrixForm.cpp" line="228"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorAudioIOMatrixForm.cpp" line="229"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
</context>
<context>
    <name>qtractorAudioListView</name>
    <message>
        <location filename="../qtractorAudioListView.cpp" line="113"/>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <location filename="../qtractorAudioListView.cpp" line="114"/>
        <source>Ch</source>
        <translation>声道</translation>
    </message>
    <message>
        <location filename="../qtractorAudioListView.cpp" line="115"/>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorAudioListView.cpp" line="116"/>
        <source>Rate</source>
        <translation>速率</translation>
    </message>
    <message>
        <location filename="../qtractorAudioListView.cpp" line="117"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorAudioListView.cpp" line="118"/>
        <source>Path</source>
        <translation>路径</translation>
    </message>
    <message>
        <location filename="../qtractorAudioListView.cpp" line="144"/>
        <source>Open Audio Files</source>
        <translation>打开音频文件</translation>
    </message>
    <message>
        <location filename="../qtractorAudioListView.cpp" line="199"/>
        <source>%1: Audio file not found.</source>
        <translation>%1：未找到音频文件。</translation>
    </message>
</context>
<context>
    <name>qtractorAudioMixerMeter</name>
    <message>
        <location filename="../qtractorAudioMeter.cpp" line="601"/>
        <source>Gain (dB)</source>
        <translation>增益 (dB)</translation>
    </message>
    <message>
        <location filename="../qtractorAudioMeter.cpp" line="602"/>
        <source> dB</source>
        <translation> dB</translation>
    </message>
    <message>
        <location filename="../qtractorAudioMeter.cpp" line="672"/>
        <source>Pan: %1</source>
        <translation>声像：%1</translation>
    </message>
    <message>
        <location filename="../qtractorAudioMeter.cpp" line="681"/>
        <source>Gain: %1 dB</source>
        <translation>增益：%1 dB</translation>
    </message>
</context>
<context>
    <name>qtractorBusForm</name>
    <message>
        <location filename="../qtractorBusForm.ui" line="59"/>
        <source>Bus list</source>
        <translation>总线列表</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="37"/>
        <location filename="../qtractorBusForm.ui" line="72"/>
        <source>Buses</source>
        <translation>总线</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="77"/>
        <source>Ch</source>
        <translation>声道</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="82"/>
        <source>Mode</source>
        <translation>模式</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="104"/>
        <location filename="../qtractorBusForm.ui" line="127"/>
        <location filename="../qtractorBusForm.cpp" line="366"/>
        <source>Bus</source>
        <translation>总线</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="121"/>
        <source>Properties</source>
        <translation>属性</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="139"/>
        <source>&amp;Name:</source>
        <translation>名称(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="149"/>
        <source>Bus name</source>
        <translation>总线名称</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="156"/>
        <source>&amp;Mode:</source>
        <translation>模式(&amp;M)：</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="179"/>
        <source>Bus mode</source>
        <translation>总线模式</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="186"/>
        <source>Input</source>
        <translation>输入</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="191"/>
        <source>Output</source>
        <translation>输出</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="196"/>
        <source>Duplex</source>
        <translation>双工</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="204"/>
        <source>Bus monitor (pass-through)</source>
        <translation>总线监听 (直通)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="207"/>
        <source>M&amp;onitor (pass-through)</source>
        <translation>监听 (直通)(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="217"/>
        <location filename="../qtractorBusForm.cpp" line="319"/>
        <location filename="../qtractorBusForm.cpp" line="400"/>
        <location filename="../qtractorBusForm.cpp" line="720"/>
        <source>Audio</source>
        <translation>音频</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="229"/>
        <source>Cha&amp;nnels:</source>
        <translation>声道(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="239"/>
        <source>Audio channels</source>
        <translation>音频声道</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="265"/>
        <source>Audio auto-connect</source>
        <translation>音频自动连接</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="268"/>
        <source>&amp;Auto connect</source>
        <translation>自动连接(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="278"/>
        <location filename="../qtractorBusForm.cpp" line="340"/>
        <location filename="../qtractorBusForm.cpp" line="413"/>
        <location filename="../qtractorBusForm.cpp" line="723"/>
        <source>MIDI</source>
        <translation>MIDI</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="284"/>
        <source>MIDI Instrument name</source>
        <translation>MIDI 乐器名称</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="291"/>
        <source>MIDI SysEx setup</source>
        <translation>MIDI 系统专用信息设置</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="294"/>
        <source>SysE&amp;x...</source>
        <translation>系统专用信息(&amp;X)...</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="328"/>
        <source>Input Plugins</source>
        <translation>输入插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="337"/>
        <source>Input bus plugins</source>
        <translation>输入总线插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="352"/>
        <source>Add input plugin</source>
        <translation>添加输入插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="355"/>
        <location filename="../qtractorBusForm.ui" line="477"/>
        <source>&amp;Add...</source>
        <translation>添加(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="374"/>
        <source>Remove input plugin</source>
        <translation>移除输入插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="377"/>
        <location filename="../qtractorBusForm.ui" line="499"/>
        <source>&amp;Remove</source>
        <translation>移除(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="409"/>
        <source>Move input plugin up</source>
        <translation>上移输入插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="412"/>
        <location filename="../qtractorBusForm.ui" line="534"/>
        <source>&amp;Up</source>
        <translation>上移(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="431"/>
        <source>Move input plugin down</source>
        <translation>下移输入插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="434"/>
        <location filename="../qtractorBusForm.ui" line="556"/>
        <source>&amp;Down</source>
        <translation>下移(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="450"/>
        <source>Output Plugins</source>
        <translation>输出插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="459"/>
        <source>Output bus plugins</source>
        <translation>输出总线插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="474"/>
        <source>Add output plugin</source>
        <translation>添加输出插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="496"/>
        <source>Remove output plugin</source>
        <translation>移除输出插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="531"/>
        <source>Move output plugin up</source>
        <translation>上移输出插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="553"/>
        <source>Move output plugin down</source>
        <translation>下移输出插件</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="587"/>
        <source>Move bus up towards the top</source>
        <translation>将总线向上移至顶部</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="590"/>
        <source>U&amp;p</source>
        <translation>上移(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="600"/>
        <source>Move bus down towards the bottom</source>
        <translation>将总线向下移至底部</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="603"/>
        <source>Do&amp;wn</source>
        <translation>下移(&amp;W)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="626"/>
        <source>Create bus</source>
        <translation>创建总线</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="629"/>
        <location filename="../qtractorBusForm.cpp" line="908"/>
        <source>&amp;Create</source>
        <translation>创建(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="639"/>
        <source>Update bus</source>
        <translation>更新总线</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="642"/>
        <location filename="../qtractorBusForm.cpp" line="913"/>
        <source>&amp;Update</source>
        <translation>更新(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="652"/>
        <source>Delete bus</source>
        <translation>删除总线</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="655"/>
        <location filename="../qtractorBusForm.cpp" line="918"/>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="665"/>
        <source>Close this dialog</source>
        <translation>关闭此对话框</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.ui" line="668"/>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="452"/>
        <location filename="../qtractorBusForm.cpp" line="730"/>
        <location filename="../qtractorBusForm.cpp" line="788"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="453"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="731"/>
        <source>About to remove bus:

&quot;%1&quot; (%2)

Are you sure?</source>
        <translation>即将删除总线：

&quot;%1&quot; (%2)

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="789"/>
        <source>Some settings have been changed.

Do you want to discard the changes?</source>
        <translation>某些设置已更改。

是否放弃这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="925"/>
        <source>Move &amp;Up</source>
        <translation>上移(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="930"/>
        <source>Move &amp;Down</source>
        <translation>下移(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="968"/>
        <source>(No instrument)</source>
        <translation>(无乐器)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="1044"/>
        <source>(none)</source>
        <translation>(无)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="1047"/>
        <source>(1 item)</source>
        <translation>(1 项)</translation>
    </message>
    <message>
        <location filename="../qtractorBusForm.cpp" line="1050"/>
        <source>(%1 items)</source>
        <translation>(%1 项)</translation>
    </message>
</context>
<context>
    <name>qtractorClientListView</name>
    <message>
        <location filename="../qtractorConnect.cpp" line="535"/>
        <source>Readable Clients / Output Ports</source>
        <translation>可读客户端 / 输出端口</translation>
    </message>
    <message>
        <location filename="../qtractorConnect.cpp" line="537"/>
        <source>Writable Clients / Input Ports</source>
        <translation>可写客户端 / 输入端口</translation>
    </message>
</context>
<context>
    <name>qtractorClip</name>
    <message>
        <location filename="../qtractorClip.cpp" line="1300"/>
        <source>Linear</source>
        <translation>线性</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="1301"/>
        <source>Quadratic 1</source>
        <translation>二次 1</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="1302"/>
        <source>Quadratic 2</source>
        <translation>二次 2</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="1303"/>
        <source>Quadratic 3</source>
        <translation>二次 3</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="1304"/>
        <source>Cubic 1</source>
        <translation>三次 1</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="1305"/>
        <source>Cubic 2</source>
        <translation>三次 2</translation>
    </message>
    <message>
        <location filename="../qtractorClip.cpp" line="1306"/>
        <source>Cubic 3</source>
        <translation>三次 3</translation>
    </message>
</context>
<context>
    <name>qtractorClipForm</name>
    <message>
        <location filename="../qtractorClipForm.ui" line="46"/>
        <source>&amp;Name:</source>
        <translation>名称(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="56"/>
        <source>Clip name</source>
        <translation>剪辑名称</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="63"/>
        <source>&amp;File:</source>
        <translation>文件(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="73"/>
        <source>Clip filename</source>
        <translation>剪辑文件名</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="98"/>
        <source>Browse for clip file</source>
        <translation>浏览剪辑文件</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="121"/>
        <source>Track/&amp;Channel:</source>
        <translation>轨道/通道(&amp;C)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="140"/>
        <source>Clip track/channel</source>
        <translation>剪辑轨道/通道</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="214"/>
        <location filename="../qtractorClipForm.ui" line="281"/>
        <source>Clip gain/volume</source>
        <translation>剪辑增益/音量</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="147"/>
        <source>Parameters</source>
        <translation>参数</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="175"/>
        <source>Clip start</source>
        <translation>剪辑起点</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="255"/>
        <source>Clip offset</source>
        <translation>剪辑偏移</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="262"/>
        <source>&amp;Panning:</source>
        <translation>声像(&amp;P)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="322"/>
        <source>Clip length</source>
        <translation>剪辑长度</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="239"/>
        <source>Offs&amp;et:</source>
        <translation>偏移(&amp;E)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="306"/>
        <source>&amp;Length:</source>
        <translation>长度(&amp;L)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="159"/>
        <source>&amp;Start:</source>
        <translation>开始(&amp;S)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="37"/>
        <source>Clip</source>
        <translation>剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="329"/>
        <source>Forma&amp;t:</source>
        <translation>格式(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="342"/>
        <source>Time display format</source>
        <translation>时间显示格式</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="346"/>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="351"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="356"/>
        <source>BBT</source>
        <translation>BBT</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="367"/>
        <source>Fade In/Out</source>
        <translation>淡入/淡出</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="379"/>
        <source>Fade &amp;In:</source>
        <translation>淡入(&amp;I)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="395"/>
        <source>Clip fade-in length</source>
        <translation>剪辑淡入长度</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="402"/>
        <source>Clip fade-in type</source>
        <translation>剪辑淡入类型</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="428"/>
        <source>Fade &amp;Out:</source>
        <translation>淡出(&amp;O)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="444"/>
        <source>Clip fade-out length</source>
        <translation>剪辑淡出长度</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="451"/>
        <source>Clip fade-out type</source>
        <translation>剪辑淡出类型</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="461"/>
        <location filename="../qtractorClipForm.cpp" line="685"/>
        <source>Audio</source>
        <translation>音频</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="486"/>
        <source>Ti&amp;me Stretch:</source>
        <translation>时间拉伸(&amp;M)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="502"/>
        <source>Clip time-stretch percentage</source>
        <translation>剪辑时间拉伸百分比</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="508"/>
        <location filename="../qtractorClipForm.cpp" line="300"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="530"/>
        <source>Pitch S&amp;hift:</source>
        <translation>移调(&amp;H)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="549"/>
        <source>Clip pitch-shift in semitones</source>
        <translation>剪辑移调 (半音)</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="555"/>
        <source> semitones</source>
        <translation> 半音</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="583"/>
        <source>Whether to use WSOLA time-stretching</source>
        <translation>是否使用 WSOLA 时间拉伸</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="586"/>
        <source>&amp;WSOLA time-stretching</source>
        <translation>WSOLA 时间拉伸(&amp;W)</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="599"/>
        <source>Whether to use RubberBand formant preserve</source>
        <translation>是否使用 RubberBand 共振峰保持</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="602"/>
        <source>RubberBand &amp;formant preserve</source>
        <translation>RubberBand 共振峰保持(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="615"/>
        <source>Whether to apply WSOLA quick seek time-stretching</source>
        <translation>是否应用 WSOLA 快速搜索时间拉伸</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="618"/>
        <source>WSOLA quic&amp;k seek</source>
        <translation>WSOLA 快速搜索(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="631"/>
        <source>Whether to use RubberBand R3 finer engine</source>
        <translation>是否使用 RubberBand R3 精细引擎</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="634"/>
        <source>RubberBand R&amp;3 finer engine</source>
        <translation>RubberBand R3 精细引擎(&amp;3)</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="646"/>
        <source>&amp;Mute</source>
        <translation>静音(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.ui" line="195"/>
        <location filename="../qtractorClipForm.cpp" line="255"/>
        <source>&amp;Gain:</source>
        <translation>增益(&amp;G)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="256"/>
        <source> dB</source>
        <translation> dB</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="299"/>
        <source>&amp;Volume:</source>
        <translation>音量(&amp;V)：</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="420"/>
        <source>new clip</source>
        <translation>新建剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="470"/>
        <source>edit clip</source>
        <translation>编辑剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="580"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="581"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="690"/>
        <source>MIDI</source>
        <translation>MIDI</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="692"/>
        <source>MIDI files (*.%1 *.smf *.midi)</source>
        <translation>MIDI 文件 (*.%1 *.smf *.midi)</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="693"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorClipForm.cpp" line="706"/>
        <source>%1 Clip File</source>
        <translation>%1 剪辑文件</translation>
    </message>
</context>
<context>
    <name>qtractorConnect</name>
    <message>
        <location filename="../qtractorConnect.cpp" line="1863"/>
        <source>Connect</source>
        <translation>连接</translation>
    </message>
    <message>
        <location filename="../qtractorConnect.cpp" line="1868"/>
        <source>Disconnect</source>
        <translation>断开连接</translation>
    </message>
    <message>
        <location filename="../qtractorConnect.cpp" line="1873"/>
        <source>Disconnect All</source>
        <translation>全部断开</translation>
    </message>
    <message>
        <location filename="../qtractorConnect.cpp" line="1880"/>
        <source>Refresh</source>
        <translation>刷新</translation>
    </message>
</context>
<context>
    <name>qtractorConnectForm</name>
    <message>
        <location filename="../qtractorConnectForm.ui" line="43"/>
        <source>Connections</source>
        <translation>连接</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="59"/>
        <source>Audio</source>
        <translation>音频</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="87"/>
        <location filename="../qtractorConnectForm.ui" line="237"/>
        <source>Select output client/ports</source>
        <translation>选择输出客户端/端口</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="112"/>
        <location filename="../qtractorConnectForm.ui" line="262"/>
        <source>Select input client/ports</source>
        <translation>选择输入客户端/端口</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="138"/>
        <location filename="../qtractorConnectForm.ui" line="288"/>
        <source>Connect currently selected ports</source>
        <translation>连接当前选中的端口</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="141"/>
        <location filename="../qtractorConnectForm.ui" line="291"/>
        <source>&amp;Connect</source>
        <translation>连接(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="151"/>
        <location filename="../qtractorConnectForm.ui" line="301"/>
        <source>Disconnect currently selected ports</source>
        <translation>断开当前选中的端口</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="154"/>
        <location filename="../qtractorConnectForm.ui" line="304"/>
        <source>&amp;Disconnect</source>
        <translation>断开(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="164"/>
        <location filename="../qtractorConnectForm.ui" line="314"/>
        <source>Disconnect all currently connected ports</source>
        <translation>断开所有当前连接的端口</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="167"/>
        <location filename="../qtractorConnectForm.ui" line="317"/>
        <source>Disconnect &amp;All</source>
        <translation>全部断开(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="193"/>
        <location filename="../qtractorConnectForm.ui" line="343"/>
        <source>Refresh current connections view</source>
        <translation>刷新当前连接视图</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="196"/>
        <location filename="../qtractorConnectForm.ui" line="346"/>
        <source>&amp;Refresh</source>
        <translation>刷新(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.ui" line="209"/>
        <source>MIDI</source>
        <translation>MIDI</translation>
    </message>
    <message>
        <location filename="../qtractorConnectForm.cpp" line="376"/>
        <source>(All)</source>
        <translation>(全部)</translation>
    </message>
</context>
<context>
    <name>qtractorConnections</name>
    <message>
        <location filename="../qtractorConnections.cpp" line="72"/>
        <source>Connections</source>
        <translation>连接</translation>
    </message>
</context>
<context>
    <name>qtractorEditRangeForm</name>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="46"/>
        <source>Range</source>
        <translation>范围</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="52"/>
        <source>Selection range</source>
        <translation>选择范围</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="55"/>
        <source>&amp;Selection</source>
        <translation>选择(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="65"/>
        <source>Loop range</source>
        <translation>循环范围</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="68"/>
        <source>&amp;Loop</source>
        <translation>循环(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="78"/>
        <source>Punch range</source>
        <translation>插入录音范围</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="81"/>
        <source>&amp;Punch</source>
        <translation>插入录音(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="91"/>
        <source>Edit range</source>
        <translation>编辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="94"/>
        <source>&amp;Edit</source>
        <translation>编辑(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="104"/>
        <source>Custom range</source>
        <translation>自定义范围</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="107"/>
        <source>&amp;Custom</source>
        <translation>自定义(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="117"/>
        <source>St&amp;art:</source>
        <translation>开始(&amp;A)：</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="133"/>
        <source>Clip start</source>
        <translation>剪辑起点</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="156"/>
        <source>En&amp;d:</source>
        <translation>结束(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="172"/>
        <source>Clip offset</source>
        <translation>剪辑偏移</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="227"/>
        <source>Apply to Loop points in range</source>
        <translation>应用到范围内的循环点</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="230"/>
        <source>L&amp;oop</source>
        <translation>循环(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="237"/>
        <source>Apply to Punch In/Out points in range</source>
        <translation>应用到范围内的插入录音点</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="240"/>
        <source>Pu&amp;nch</source>
        <translation>插入录音(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="250"/>
        <source>Mar&amp;kers</source>
        <translation>标记(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="260"/>
        <source>Te&amp;mpo Map</source>
        <translation>速度图谱(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="270"/>
        <source>&amp;Format</source>
        <translation>格式(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="276"/>
        <source>Time display format</source>
        <translation>时间显示格式</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="285"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="290"/>
        <source>BBT</source>
        <translation>BBT</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="280"/>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="37"/>
        <source>Edit Range</source>
        <translation>编辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="195"/>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="201"/>
        <source>Apply to clips in range</source>
        <translation>应用到范围内的剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="204"/>
        <source>Cl&amp;ips</source>
        <translation>剪辑(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="217"/>
        <source>A&amp;utomation</source>
        <translation>自动化(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="214"/>
        <source>Apply to Automation nodes in range</source>
        <translation>应用到范围内的自动化节点</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="257"/>
        <source>Apply to Tempo Map nodes in range</source>
        <translation>应用到范围内的速度图谱节点</translation>
    </message>
    <message>
        <location filename="../qtractorEditRangeForm.ui" line="247"/>
        <source>Apply to location Markers in range</source>
        <translation>应用到范围内的位置标记</translation>
    </message>
</context>
<context>
    <name>qtractorExportClipForm</name>
    <message>
        <location filename="../qtractorExportForm.cpp" line="978"/>
        <source>%1 %2 Clips</source>
        <translation>%1 %2 剪辑</translation>
    </message>
</context>
<context>
    <name>qtractorExportForm</name>
    <message>
        <location filename="../qtractorExportForm.ui" line="37"/>
        <location filename="../qtractorExportForm.cpp" line="63"/>
        <source>Export</source>
        <translation>导出</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="46"/>
        <source>&amp;File:</source>
        <translation>文件(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="70"/>
        <source>Export file name</source>
        <translation>导出文件名</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="95"/>
        <source>Browse export file name</source>
        <translation>浏览导出文件名</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="126"/>
        <source>File &amp;type:</source>
        <translation>文件类型(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="142"/>
        <source>Audio file type to use on export</source>
        <translation>导出时使用的音频文件类型</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="158"/>
        <source>Sample &amp;format:</source>
        <translation>采样格式(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="174"/>
        <source>Audio sample format to use on export</source>
        <translation>导出时使用的音频采样格式</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="190"/>
        <source>&amp;Quality:</source>
        <translation>质量(&amp;Q)：</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="212"/>
        <source>Audio compression quality to use on export</source>
        <translation>导出时使用的音频压缩质量</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="269"/>
        <source>File &amp;format:</source>
        <translation>文件格式(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="285"/>
        <source>MIDI file format to use on export</source>
        <translation>导出时使用的 MIDI 文件格式</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="312"/>
        <source>Range</source>
        <translation>范围</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="333"/>
        <source>Session range</source>
        <translation>工程范围</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="336"/>
        <source>&amp;Session</source>
        <translation>工程(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="346"/>
        <source>Loop range</source>
        <translation>循环范围</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="349"/>
        <source>&amp;Loop</source>
        <translation>循环(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="359"/>
        <source>Punch range</source>
        <translation>插入录音范围</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="362"/>
        <source>&amp;Punch</source>
        <translation>插入录音(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="372"/>
        <source>Edit range</source>
        <translation>编辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="375"/>
        <source>&amp;Edit</source>
        <translation>编辑(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="385"/>
        <source>Custom range</source>
        <translation>自定义范围</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="388"/>
        <source>&amp;Custom</source>
        <translation>自定义(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="414"/>
        <source>St&amp;art:</source>
        <translation>开始(&amp;A)：</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="430"/>
        <source>Custom start</source>
        <translation>自定义起点</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="453"/>
        <source>Custom end</source>
        <translation>自定义终点</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="437"/>
        <source>En&amp;d:</source>
        <translation>结束(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="482"/>
        <source>Outputs</source>
        <translation>输出</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="494"/>
        <source>Output bus names</source>
        <translation>输出总线名称</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="507"/>
        <source>Format</source>
        <translation>格式</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="513"/>
        <source>Time display format</source>
        <translation>时间显示格式</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="517"/>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="522"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="527"/>
        <source>BBT</source>
        <translation>BBT</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="546"/>
        <source>Whether to add/import new track(s) with export result</source>
        <translation>是否随导出结果添加/导入新轨道</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.ui" line="549"/>
        <source>&amp;Add new track(s)</source>
        <translation>添加新轨道(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="169"/>
        <source>Audio</source>
        <translation>音频</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="176"/>
        <source>MIDI</source>
        <translation>MIDI</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="321"/>
        <source>Export %1 File</source>
        <translation>导出 %1 文件</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="329"/>
        <source>MIDI files (*.%1 *.smf *.midi)</source>
        <translation>MIDI 文件 (*.%1 *.smf *.midi)</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="333"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="690"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="691"/>
        <source>The file already exists:

&quot;%1&quot;

Do you want to replace it?</source>
        <translation>文件已存在：

&quot;%1&quot;

是否替换？</translation>
    </message>
</context>
<context>
    <name>qtractorExportTrackForm</name>
    <message>
        <location filename="../qtractorExportForm.cpp" line="725"/>
        <source>%1 %2 Tracks</source>
        <translation>%1 %2 轨道</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="810"/>
        <source>Audio file export: &quot;%1&quot; started...</source>
        <translation>音频文件导出：&quot;%1&quot; 已开始...</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="836"/>
        <source>Audio file export: &quot;%1&quot; complete.</source>
        <translation>音频文件导出：&quot;%1&quot; 完成。</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="841"/>
        <source>Audio file export:

&quot;%1&quot;

failed.</source>
        <translation>音频文件导出：

&quot;%1&quot;

失败。</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="867"/>
        <source>MIDI file export: &quot;%1&quot; started...</source>
        <translation>MIDI 文件导出：&quot;%1&quot; 已开始...</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="894"/>
        <source>MIDI file export: &quot;%1&quot; complete.</source>
        <translation>MIDI 文件导出：&quot;%1&quot; 完成。</translation>
    </message>
    <message>
        <location filename="../qtractorExportForm.cpp" line="899"/>
        <source>MIDI file export:

&quot;%1&quot;

failed.</source>
        <translation>MIDI 文件导出：

&quot;%1&quot;

失败。</translation>
    </message>
</context>
<context>
    <name>qtractorFileListView</name>
    <message>
        <location filename="../qtractorFileListView.cpp" line="568"/>
        <source>New Group</source>
        <translation>新建分组</translation>
    </message>
    <message>
        <location filename="../qtractorFileListView.cpp" line="685"/>
        <location filename="../qtractorFileListView.cpp" line="714"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorFileListView.cpp" line="686"/>
        <source>About to remove %1 file item(s).

Are you sure?</source>
        <translation>即将删除 %1 个文件项。

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorFileListView.cpp" line="715"/>
        <source>About to remove %1 item:

&quot;%2&quot;

Are you sure?</source>
        <translation>即将删除 %1 项：

&quot;%2&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorFileListView.cpp" line="718"/>
        <source>group</source>
        <translation>分组</translation>
    </message>
    <message>
        <location filename="../qtractorFileListView.cpp" line="718"/>
        <source>file</source>
        <translation>文件</translation>
    </message>
</context>
<context>
    <name>qtractorFileSystem</name>
    <message>
        <location filename="../qtractorFileSystem.cpp" line="80"/>
        <source>&amp;Home</source>
        <translation>主目录(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorFileSystem.cpp" line="82"/>
        <source>&amp;Up</source>
        <translation>上级(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorFileSystem.cpp" line="84"/>
        <source>Al&amp;l Files</source>
        <translation>所有文件(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorFileSystem.cpp" line="88"/>
        <source>&amp;Session</source>
        <translation>工程(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorFileSystem.cpp" line="92"/>
        <source>&amp;Audio</source>
        <translation>音频(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorFileSystem.cpp" line="96"/>
        <source>&amp;MIDI</source>
        <translation>MIDI(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorFileSystem.cpp" line="99"/>
        <source>H&amp;idden</source>
        <translation>隐藏(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorFileSystem.cpp" line="103"/>
        <source>&amp;Play</source>
        <translation>播放(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorFileSystem.cpp" line="171"/>
        <source>File System</source>
        <translation>文件系统</translation>
    </message>
</context>
<context>
    <name>qtractorFiles</name>
    <message>
        <location filename="../qtractorFiles.cpp" line="80"/>
        <source>Audio</source>
        <translation>音频</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="81"/>
        <source>MIDI</source>
        <translation>MIDI</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="96"/>
        <source>Play file</source>
        <translation>播放文件</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="106"/>
        <source>Add &amp;Files...</source>
        <translation>添加文件(&amp;F)...</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="108"/>
        <source>Cu&amp;t</source>
        <translation>剪切(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="110"/>
        <source>&amp;Copy</source>
        <translation>复制(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="126"/>
        <source>Ctrl+X</source>
        <translation>Ctrl+X</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="127"/>
        <source>Ctrl+C</source>
        <translation>Ctrl+C</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="128"/>
        <source>Ctrl+V</source>
        <translation>Ctrl+V</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="104"/>
        <source>New &amp;Group...</source>
        <translation>新建分组(&amp;G)...</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="112"/>
        <source>&amp;Paste</source>
        <translation>粘贴(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="114"/>
        <source>Re&amp;name</source>
        <translation>重命名(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="116"/>
        <source>&amp;Remove</source>
        <translation>移除(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="118"/>
        <source>Pla&amp;y</source>
        <translation>播放(&amp;Y)</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="120"/>
        <source>Cl&amp;eanup</source>
        <translation>清理(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="130"/>
        <source>Del</source>
        <translation>Del</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="163"/>
        <source>Files</source>
        <translation>文件</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="548"/>
        <source>MIDI Files</source>
        <translation>MIDI 文件</translation>
    </message>
    <message>
        <location filename="../qtractorFiles.cpp" line="552"/>
        <source>Audio Files</source>
        <translation>音频文件</translation>
    </message>
</context>
<context>
    <name>qtractorInstrumentForm</name>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="34"/>
        <location filename="../qtractorInstrumentForm.ui" line="66"/>
        <source>Instruments</source>
        <translation>乐器</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="95"/>
        <source>Files</source>
        <translation>文件</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="100"/>
        <source>Path</source>
        <translation>路径</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="125"/>
        <source>Names</source>
        <translation>名称</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="137"/>
        <source>Import from instrument file</source>
        <translation>从乐器文件导入</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="140"/>
        <source>&amp;Import...</source>
        <translation>导入(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="150"/>
        <source>Remove instrument file</source>
        <translation>移除乐器文件</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="153"/>
        <source>&amp;Remove</source>
        <translation>移除(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="163"/>
        <source>Move instrument file up on list order</source>
        <translation>在列表中将乐器文件上移</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="166"/>
        <source>&amp;Up</source>
        <translation>上移(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="176"/>
        <source>Move instrument file down on list order</source>
        <translation>在列表中将乐器文件下移</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="179"/>
        <source>&amp;Down</source>
        <translation>下移(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="205"/>
        <source>Export to instrument file</source>
        <translation>导出到乐器文件</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="208"/>
        <source>E&amp;xport...</source>
        <translation>导出(&amp;X)...</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="218"/>
        <source>Close this dialog</source>
        <translation>关闭此对话框</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.ui" line="221"/>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="218"/>
        <source>Import Instrument Files</source>
        <translation>导入乐器文件</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="221"/>
        <source>Instrument files (*.%1 *.sf2 *.sf3 *.midnam)</source>
        <translation>乐器文件 (*.%1 *.sf2 *.sf3 *.midnam)</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="222"/>
        <location filename="../qtractorInstrumentForm.cpp" line="388"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="384"/>
        <source>Export Instrument File</source>
        <translation>导出乐器文件</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="387"/>
        <source>Instrument files (*.%1)</source>
        <translation>乐器文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="429"/>
        <location filename="../qtractorInstrumentForm.cpp" line="471"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="430"/>
        <source>The instrument file already exists:

&quot;%1&quot;

Do you want to replace it?</source>
        <translation>乐器文件已存在：

&quot;%1&quot;

是否替换？</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="472"/>
        <source>Instrument settings have been changed.

Do you want to apply the changes?</source>
        <translation>乐器设置已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="555"/>
        <source>Patch Names for Banks</source>
        <translation>音色库音色名称</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="597"/>
        <source>Controller Names = %1</source>
        <translation>控制器名称 = %1</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="605"/>
        <source>RPN Names = %1</source>
        <translation>RPN 名称 = %1</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="613"/>
        <source>NRPN Names = %1</source>
        <translation>NRPN 名称 = %1</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="620"/>
        <source>Bank Select Method = %1</source>
        <translation>音色库选择方式 = %1</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="633"/>
        <source>Patch Names</source>
        <translation>音色名称</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="639"/>
        <source>Note Names</source>
        <translation>音符名称</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="645"/>
        <source>Controller Names</source>
        <translation>控制器名称</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="651"/>
        <source>RPN Names</source>
        <translation>RPN 名称</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="657"/>
        <source>NRPN Names</source>
        <translation>NRPN 名称</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="663"/>
        <source>Bank Select Methods</source>
        <translation>音色库选择方式</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="670"/>
        <source>%1 = %2</source>
        <translation>%1 = %2</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="707"/>
        <source>Based On = %1</source>
        <translation>基于 = %1</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="743"/>
        <source>Normal</source>
        <translation>常规</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="744"/>
        <source>Bank MSB</source>
        <translation>音色库 MSB</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="745"/>
        <source>Bank LSB</source>
        <translation>音色库 LSB</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="746"/>
        <source>Patch</source>
        <translation>音色</translation>
    </message>
    <message>
        <location filename="../qtractorInstrumentForm.cpp" line="747"/>
        <source>Unknown</source>
        <translation>未知</translation>
    </message>
</context>
<context>
    <name>qtractorInstrumentMenu</name>
    <message>
        <location filename="../qtractorInstrumentMenu.cpp" line="214"/>
        <location filename="../qtractorInstrumentMenu.cpp" line="263"/>
        <location filename="../qtractorInstrumentMenu.cpp" line="362"/>
        <location filename="../qtractorInstrumentMenu.cpp" line="411"/>
        <source>(None)</source>
        <translation>(无)</translation>
    </message>
</context>
<context>
    <name>qtractorMainForm</name>
    <message>
        <location filename="../qtractorMainForm.ui" line="191"/>
        <location filename="../qtractorMainForm.ui" line="2192"/>
        <source>&amp;File</source>
        <translation>文件(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="195"/>
        <source>Open &amp;Recent</source>
        <translation>打开最近(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="392"/>
        <location filename="../qtractorMainForm.ui" line="2209"/>
        <source>&amp;Edit</source>
        <translation>编辑(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="396"/>
        <source>Select &amp;Mode</source>
        <translation>选择模式(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="280"/>
        <location filename="../qtractorMainForm.ui" line="352"/>
        <location filename="../qtractorMainForm.ui" line="406"/>
        <source>&amp;Select</source>
        <translation>选择(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="418"/>
        <source>I&amp;nsert</source>
        <translation>插入(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="425"/>
        <source>Remo&amp;ve</source>
        <translation>移除(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="212"/>
        <location filename="../qtractorMainForm.ui" line="961"/>
        <location filename="../qtractorMainForm.ui" line="2226"/>
        <source>&amp;Track</source>
        <translation>轨道(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="216"/>
        <source>&amp;State</source>
        <translation>状态(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="226"/>
        <source>&amp;Navigate</source>
        <translation>导航(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="237"/>
        <source>Mo&amp;ve</source>
        <translation>移动(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="246"/>
        <source>&amp;Height</source>
        <translation>高度(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="257"/>
        <source>Impor&amp;t Tracks</source>
        <translation>导入轨道(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="264"/>
        <source>E&amp;xport Tracks</source>
        <translation>导出轨道(&amp;X)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="285"/>
        <source>M&amp;ode</source>
        <translation>模式(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="276"/>
        <source>A&amp;utomation</source>
        <translation>自动化(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="271"/>
        <source>Instrum&amp;ent</source>
        <translation>乐器(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="335"/>
        <source>T&amp;ools</source>
        <translation>工具(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="348"/>
        <source>Ta&amp;ke</source>
        <translation>录音(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="453"/>
        <location filename="../qtractorMainForm.ui" line="2243"/>
        <source>&amp;View</source>
        <translation>视图(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="457"/>
        <source>&amp;Toolbars</source>
        <translation>工具栏(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="472"/>
        <source>&amp;Windows</source>
        <translation>窗口(&amp;W)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="482"/>
        <source>&amp;Zoom</source>
        <translation>缩放(&amp;Z)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="498"/>
        <source>S&amp;nap</source>
        <translation>吸附(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="522"/>
        <location filename="../qtractorMainForm.ui" line="2277"/>
        <source>T&amp;ransport</source>
        <translation>走带(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="526"/>
        <source>Mo&amp;de</source>
        <translation>模式(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="535"/>
        <source>St&amp;ep</source>
        <translation>步进(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="570"/>
        <source>&amp;Help</source>
        <translation>帮助(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="591"/>
        <source>&amp;New</source>
        <translation>新建(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="594"/>
        <source>New</source>
        <translation>新建</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="597"/>
        <source>New session</source>
        <translation>新建工程</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="600"/>
        <source>New session file</source>
        <translation>新建工程文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="603"/>
        <source>Ctrl+N</source>
        <translation>Ctrl+N</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="611"/>
        <source>&amp;Open...</source>
        <translation>打开(&amp;O)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="614"/>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="617"/>
        <source>Open session</source>
        <translation>打开工程</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="620"/>
        <source>Open session from file</source>
        <translation>从文件打开工程</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="623"/>
        <source>Ctrl+O</source>
        <translation>Ctrl+O</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="631"/>
        <source>&amp;Save</source>
        <translation>保存(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="634"/>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="637"/>
        <source>Save session</source>
        <translation>保存工程</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="640"/>
        <source>Save session to file</source>
        <translation>保存工程到文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="643"/>
        <source>Ctrl+S</source>
        <translation>Ctrl+S</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="648"/>
        <source>Save &amp;As...</source>
        <translation>另存为(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="651"/>
        <source>Save As</source>
        <translation>另存为</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="654"/>
        <source>Save as</source>
        <translation>另存为</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="657"/>
        <source>Save current session with another file name</source>
        <translation>用另一个文件名保存当前工程</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="662"/>
        <source>&amp;Properties...</source>
        <translation>属性(&amp;P)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="665"/>
        <source>Session Properties</source>
        <translation>工程属性</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="668"/>
        <source>Session properties</source>
        <translation>工程属性</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="671"/>
        <source>Edit current session properties</source>
        <translation>编辑当前工程属性</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="674"/>
        <source>F2</source>
        <translation>F2</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="679"/>
        <source>E&amp;xit</source>
        <translation>退出(&amp;X)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="682"/>
        <location filename="../qtractorMainForm.ui" line="685"/>
        <source>Exit</source>
        <translation>退出</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="688"/>
        <source>Exit this application program</source>
        <translation>退出此应用程序</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="696"/>
        <source>&amp;Undo</source>
        <translation>撤销(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="699"/>
        <location filename="../qtractorMainForm.ui" line="702"/>
        <source>Undo</source>
        <translation>撤销</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="705"/>
        <source>Undo last action</source>
        <translation>撤销上次操作</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="708"/>
        <source>Ctrl+Z</source>
        <translation>Ctrl+Z</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="716"/>
        <source>&amp;Redo</source>
        <translation>重做(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="719"/>
        <location filename="../qtractorMainForm.ui" line="722"/>
        <source>Redo</source>
        <translation>重做</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="725"/>
        <source>Redo last action</source>
        <translation>重做上次操作</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="728"/>
        <source>Ctrl+Shift+Z</source>
        <translation>Ctrl+Shift+Z</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="736"/>
        <source>Cu&amp;t</source>
        <translation>剪切(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="739"/>
        <location filename="../qtractorMainForm.ui" line="742"/>
        <source>Cut</source>
        <translation>剪切</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="745"/>
        <source>Cut selection to clipboard</source>
        <translation>剪切选中内容到剪贴板</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="748"/>
        <source>Ctrl+X</source>
        <translation>Ctrl+X</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="756"/>
        <source>&amp;Copy</source>
        <translation>复制(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="759"/>
        <location filename="../qtractorMainForm.ui" line="762"/>
        <source>Copy</source>
        <translation>复制</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="765"/>
        <source>Copy selection to clipboard</source>
        <translation>复制选中内容到剪贴板</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="768"/>
        <source>Ctrl+C</source>
        <translation>Ctrl+C</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="776"/>
        <source>&amp;Paste</source>
        <translation>粘贴(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="779"/>
        <location filename="../qtractorMainForm.ui" line="782"/>
        <source>Paste</source>
        <translation>粘贴</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="785"/>
        <source>Paste clipboard contents</source>
        <translation>粘贴剪贴板内容</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="788"/>
        <source>Ctrl+V</source>
        <translation>Ctrl+V</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="793"/>
        <source>Past&amp;e Repeat...</source>
        <translation>重复粘贴(&amp;E)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="796"/>
        <source>Paste Repeat</source>
        <translation>重复粘贴</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="799"/>
        <source>Paste repeat</source>
        <translation>重复粘贴</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="802"/>
        <source>Paste/repeat clipboard contents</source>
        <translation>粘贴/重复剪贴板内容</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="805"/>
        <source>Ctrl+Shift+V</source>
        <translation>Ctrl+Shift+V</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="813"/>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="816"/>
        <location filename="../qtractorMainForm.ui" line="819"/>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="822"/>
        <source>Delete selection</source>
        <translation>删除选中内容</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="825"/>
        <source>Del</source>
        <translation>Del</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="331"/>
        <location filename="../qtractorMainForm.ui" line="836"/>
        <source>&amp;Clip</source>
        <translation>剪辑(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="839"/>
        <source>Clip</source>
        <translation>剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="842"/>
        <source>Select clip</source>
        <translation>选择剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="845"/>
        <source>Clip selection mode</source>
        <translation>剪辑选择模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="856"/>
        <location filename="../qtractorMainForm.ui" line="995"/>
        <source>&amp;Range</source>
        <translation>范围(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="859"/>
        <source>Range</source>
        <translation>范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="862"/>
        <location filename="../qtractorMainForm.ui" line="1001"/>
        <source>Select range</source>
        <translation>选择范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="865"/>
        <source>Range selection mode</source>
        <translation>范围选择模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="876"/>
        <source>R&amp;ectangle</source>
        <translation>矩形(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="879"/>
        <source>Rect</source>
        <translation>矩形</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="882"/>
        <source>Select rectangle</source>
        <translation>选择矩形</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="885"/>
        <source>Rectangular selection mode</source>
        <translation>矩形选择模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="896"/>
        <source>&amp;Automation</source>
        <translation>自动化(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="899"/>
        <location filename="../qtractorMainForm.ui" line="902"/>
        <source>Automation</source>
        <translation>自动化</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="905"/>
        <source>Automation edit mode</source>
        <translation>自动化编辑模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="910"/>
        <location filename="../qtractorMainForm.ui" line="2545"/>
        <source>&amp;All</source>
        <translation>全部(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="913"/>
        <source>Select All</source>
        <translation>全选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="916"/>
        <source>Select all</source>
        <translation>全选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="919"/>
        <source>Mark all as selected</source>
        <translation>标记全部为已选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="922"/>
        <source>Ctrl+A</source>
        <translation>Ctrl+A</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="927"/>
        <location filename="../qtractorMainForm.ui" line="3060"/>
        <location filename="../qtractorMainForm.cpp" line="7794"/>
        <source>&amp;None</source>
        <translation>无(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="930"/>
        <source>Select None</source>
        <translation>取消全选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="933"/>
        <source>Select none</source>
        <translation>取消全选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="936"/>
        <source>Mark all as unselected</source>
        <translation>标记全部为未选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="939"/>
        <source>Ctrl+Shift+A</source>
        <translation>Ctrl+Shift+A</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="944"/>
        <source>&amp;Invert</source>
        <translation>反选(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="947"/>
        <source>Select Invert</source>
        <translation>反选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="950"/>
        <source>Select invert</source>
        <translation>反选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="953"/>
        <source>Invert selection</source>
        <translation>反向选择</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="956"/>
        <source>Ctrl+I</source>
        <translation>Ctrl+I</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="964"/>
        <source>Select Track</source>
        <translation>选择轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="967"/>
        <source>Select track</source>
        <translation>选择轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="970"/>
        <source>Mark track as selected</source>
        <translation>标记轨道为已选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="973"/>
        <source>Ctrl+T</source>
        <translation>Ctrl+T</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="978"/>
        <location filename="../qtractorMainForm.ui" line="1029"/>
        <location filename="../qtractorMainForm.ui" line="1063"/>
        <source>Trac&amp;k Range</source>
        <translation>轨道范围(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="981"/>
        <source>Select Track Range</source>
        <translation>选择轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="984"/>
        <source>Select track range</source>
        <translation>选择轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="987"/>
        <source>Mark track range as selected</source>
        <translation>标记轨道范围为已选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="990"/>
        <source>Ctrl+Shift+R</source>
        <translation>Ctrl+Shift+R</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="998"/>
        <source>Select Range</source>
        <translation>选择范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1004"/>
        <source>Mark range as selected</source>
        <translation>标记范围为已选</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1007"/>
        <source>Ctrl+R</source>
        <translation>Ctrl+R</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1012"/>
        <location filename="../qtractorMainForm.ui" line="1046"/>
        <source>&amp;Range...</source>
        <translation>范围(&amp;R)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1015"/>
        <source>Remove Range</source>
        <translation>移除范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1018"/>
        <source>Remove range</source>
        <translation>移除范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1021"/>
        <source>Remove range as selected</source>
        <translation>移除选中范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1024"/>
        <source>Ctrl+Del</source>
        <translation>Ctrl+Del</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1032"/>
        <source>Remove Track Range</source>
        <translation>移除轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1035"/>
        <source>Remove track range</source>
        <translation>移除轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1038"/>
        <source>Remove track range as selected</source>
        <translation>移除选中轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1041"/>
        <source>Ctrl+Shift+Del</source>
        <translation>Ctrl+Shift+Del</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1049"/>
        <source>Insert Range</source>
        <translation>插入范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1052"/>
        <source>Insert range</source>
        <translation>插入范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1055"/>
        <source>Insert range as selected</source>
        <translation>插入选中范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1058"/>
        <source>Ctrl+Ins</source>
        <translation>Ctrl+Ins</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1066"/>
        <source>Insert Track Range</source>
        <translation>插入轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1069"/>
        <source>Insert track range</source>
        <translation>插入轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1072"/>
        <source>Insert track range as selected</source>
        <translation>插入选中轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1075"/>
        <source>Ctrl+Shift+Ins</source>
        <translation>Ctrl+Shift+Ins</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1080"/>
        <source>Sp&amp;lit</source>
        <translation>分割(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1083"/>
        <source>Split Selection</source>
        <translation>分割选中</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1086"/>
        <source>Split selection</source>
        <translation>分割选中</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1089"/>
        <source>Split current selection</source>
        <translation>分割当前选中</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1092"/>
        <source>Ctrl+Y</source>
        <translation>Ctrl+Y</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1100"/>
        <source>&amp;Add Track...</source>
        <translation>添加轨道(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1103"/>
        <source>Add Track</source>
        <translation>添加轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1106"/>
        <source>Add track</source>
        <translation>添加轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1109"/>
        <source>Add a new track to session</source>
        <translation>向工程添加新轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1112"/>
        <source>Shift+Ins</source>
        <translation>Shift+Ins</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1120"/>
        <source>&amp;Remove Track</source>
        <translation>移除轨道(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1123"/>
        <source>Remove Track</source>
        <translation>移除轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1126"/>
        <source>Remove track</source>
        <translation>移除轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1129"/>
        <source>Remove current track from session</source>
        <translation>从工程移除当前轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1132"/>
        <source>Shift+Del</source>
        <translation>Shift+Del</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1137"/>
        <source>&amp;Duplicate Track</source>
        <translation>复制轨道(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1140"/>
        <source>Duplicate Track</source>
        <translation>复制轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1143"/>
        <source>Duplicate track</source>
        <translation>复制轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1146"/>
        <source>Duplicate current track</source>
        <translation>复制当前轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1154"/>
        <source>Track &amp;Properties...</source>
        <translation>轨道属性(&amp;P)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1157"/>
        <source>Track Properties</source>
        <translation>轨道属性</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1160"/>
        <source>Track properties</source>
        <translation>轨道属性</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1163"/>
        <source>Edit current track properties</source>
        <translation>编辑当前轨道属性</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1166"/>
        <source>Shift+F2</source>
        <translation>Shift+F2</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1171"/>
        <source>&amp;Inputs</source>
        <translation>输入(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1174"/>
        <source>Track Inputs</source>
        <translation>轨道输入</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1177"/>
        <source>Track inputs</source>
        <translation>轨道输入</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1180"/>
        <source>Show current track input bus connections</source>
        <translation>显示当前轨道输入总线连接</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1185"/>
        <source>&amp;Outputs</source>
        <translation>输出(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1188"/>
        <source>Track Outputs</source>
        <translation>轨道输出</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1191"/>
        <source>Track outputs</source>
        <translation>轨道输出</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1194"/>
        <source>Show current track output bus connections</source>
        <translation>显示当前轨道输出总线连接</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1202"/>
        <location filename="../qtractorMainForm.ui" line="1637"/>
        <location filename="../qtractorMainForm.ui" line="2900"/>
        <source>&amp;Record</source>
        <translation>录音(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1205"/>
        <source>Record Track</source>
        <translation>录音轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1208"/>
        <source>Record track</source>
        <translation>录音轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1211"/>
        <source>Arm current track for recording</source>
        <translation>将当前轨道设为录音准备</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1219"/>
        <location filename="../qtractorMainForm.ui" line="1770"/>
        <source>&amp;Mute</source>
        <translation>静音(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1222"/>
        <source>Mute Track</source>
        <translation>静音轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1225"/>
        <source>Mute track</source>
        <translation>静音轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1228"/>
        <source>Mute current track</source>
        <translation>将当前轨道静音</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1236"/>
        <source>&amp;Solo</source>
        <translation>独奏(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1239"/>
        <source>Solo Track</source>
        <translation>独奏轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1242"/>
        <source>Solo track</source>
        <translation>独奏轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1245"/>
        <source>Solo current track</source>
        <translation>将当前轨道独奏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1253"/>
        <source>M&amp;onitor</source>
        <translation>监听(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1256"/>
        <source>Monitor Track</source>
        <translation>监听轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1259"/>
        <source>Monitor track</source>
        <translation>监听轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1262"/>
        <source>Monitor current track</source>
        <translation>监听当前轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1267"/>
        <location filename="../qtractorMainForm.ui" line="2065"/>
        <source>&amp;First</source>
        <translation>第一个(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1270"/>
        <source>First Track</source>
        <translation>第一个轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1273"/>
        <source>First track</source>
        <translation>第一个轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1276"/>
        <source>Make current the first track</source>
        <translation>将第一个轨道设为当前轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1281"/>
        <location filename="../qtractorMainForm.ui" line="2079"/>
        <source>&amp;Previous</source>
        <translation>上一个(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1284"/>
        <source>Previous Track</source>
        <translation>上一个轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1287"/>
        <source>Previous track</source>
        <translation>上一个轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1290"/>
        <source>Make current the previous track</source>
        <translation>将上一个轨道设为当前轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1295"/>
        <location filename="../qtractorMainForm.ui" line="2093"/>
        <source>&amp;Next</source>
        <translation>下一个(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1298"/>
        <source>Next Track</source>
        <translation>下一个轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1301"/>
        <source>Next track</source>
        <translation>下一个轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1304"/>
        <source>Make current the next track</source>
        <translation>将下一个轨道设为当前轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1309"/>
        <location filename="../qtractorMainForm.ui" line="2110"/>
        <source>&amp;Last</source>
        <translation>最后一个(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1312"/>
        <source>Last Track</source>
        <translation>最后一个轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1315"/>
        <source>Last track</source>
        <translation>最后一个轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1318"/>
        <source>Make current the last track</source>
        <translation>将最后一个轨道设为当前轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1323"/>
        <source>N&amp;one</source>
        <translation>无(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1326"/>
        <source>None Track</source>
        <translation>无轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1329"/>
        <source>None track</source>
        <translation>无轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1332"/>
        <source>None current track</source>
        <translation>取消当前轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1337"/>
        <source>&amp;Top</source>
        <translation>置顶(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1340"/>
        <source>Move Top</source>
        <translation>移到顶部</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1343"/>
        <source>Move top</source>
        <translation>移到顶部</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1346"/>
        <source>Move current track to top</source>
        <translation>将当前轨道移到顶部</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1351"/>
        <source>&amp;Up</source>
        <translation>上移(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1354"/>
        <source>Move Up</source>
        <translation>上移</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1357"/>
        <source>Move up</source>
        <translation>上移</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1360"/>
        <source>Move current track up</source>
        <translation>将当前轨道上移</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1365"/>
        <source>&amp;Down</source>
        <translation>下移(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1368"/>
        <source>Move Down</source>
        <translation>下移</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1371"/>
        <source>Move down</source>
        <translation>下移</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1374"/>
        <source>Move current track down</source>
        <translation>将当前轨道下移</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1379"/>
        <source>&amp;Bottom</source>
        <translation>置底(&amp;B)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1382"/>
        <source>Move Bottom</source>
        <translation>移到底部</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1385"/>
        <source>Move bottom</source>
        <translation>移到底部</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1388"/>
        <source>Move current track to bottom</source>
        <translation>将当前轨道移到底部</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1393"/>
        <source>&amp;Increase</source>
        <translation>增加(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1396"/>
        <source>Increase Height</source>
        <translation>增加高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1399"/>
        <source>Increase height</source>
        <translation>增加高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1402"/>
        <source>Increase track height</source>
        <translation>增加轨道高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1405"/>
        <source>Ctrl+Shift++</source>
        <translation>Ctrl+Shift++</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1410"/>
        <source>&amp;Decrease</source>
        <translation>减少(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1413"/>
        <source>Decrease Height</source>
        <translation>减少高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1416"/>
        <source>Decrease height</source>
        <translation>减少高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1419"/>
        <source>Decrease track height</source>
        <translation>减少轨道高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1422"/>
        <source>Ctrl+Shift+-</source>
        <translation>Ctrl+Shift+-</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1427"/>
        <source>&amp;Minimize</source>
        <translation>最小化(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1430"/>
        <source>Minimize Height</source>
        <translation>最小化高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1433"/>
        <source>Minimize height</source>
        <translation>最小化高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1436"/>
        <source>Minimize track height</source>
        <translation>最小化轨道高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1441"/>
        <location filename="../qtractorMainForm.ui" line="2124"/>
        <location filename="../qtractorMainForm.ui" line="2491"/>
        <source>&amp;Reset</source>
        <translation>重置(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1444"/>
        <source>Height Reset</source>
        <translation>重置高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1447"/>
        <source>Height reset</source>
        <translation>重置高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1450"/>
        <source>Reset track height</source>
        <translation>重置轨道高度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1453"/>
        <source>Ctrl+Shift+1</source>
        <translation>Ctrl+Shift+1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1461"/>
        <source>Auto &amp;Monitor</source>
        <translation>自动监听(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1464"/>
        <source>Auto Monitor</source>
        <translation>自动监听</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1467"/>
        <source>Auto monitor</source>
        <translation>自动监听</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1470"/>
        <source>Auto-monitor current track</source>
        <translation>自动监听当前轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1473"/>
        <source>F6</source>
        <translation>F6</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1481"/>
        <source>Auto Dea&amp;ctivate</source>
        <translation>自动停用(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1484"/>
        <source>Auto Deactivate</source>
        <translation>自动停用</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1487"/>
        <source>Auto-deactivate plugins</source>
        <translation>自动停用插件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1490"/>
        <source>Auto-deactivate plugins not producing sound</source>
        <translation>自动停用不发声的插件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1493"/>
        <source>Shift+F6</source>
        <translation>Shift+F6</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1501"/>
        <location filename="../qtractorMainForm.ui" line="1535"/>
        <source>&amp;Audio...</source>
        <translation>音频(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1504"/>
        <source>Inport Audio File</source>
        <translation>导入音频文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1507"/>
        <source>Import Audio file</source>
        <translation>导入音频文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1510"/>
        <source>Import tracks from Audio file</source>
        <translation>从音频文件导入轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1518"/>
        <location filename="../qtractorMainForm.ui" line="1552"/>
        <source>&amp;MIDI...</source>
        <translation>MIDI(&amp;M)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1521"/>
        <source>Import MIDI File</source>
        <translation>导入 MIDI 文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1524"/>
        <source>Import MIDI file</source>
        <translation>导入 MIDI 文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1527"/>
        <source>Import tracks from MIDI file</source>
        <translation>从 MIDI 文件导入轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1538"/>
        <source>Export Audio File</source>
        <translation>导出音频文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1541"/>
        <source>Export Audio file</source>
        <translation>导出音频文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1544"/>
        <source>Export tracks to Audio file</source>
        <translation>将轨道导出为音频文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1555"/>
        <source>Export MIDI File</source>
        <translation>导出 MIDI 文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1558"/>
        <source>Export MIDI file</source>
        <translation>导出 MIDI 文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1561"/>
        <source>Export tracks to MIDI file</source>
        <translation>将轨道导出为 MIDI 文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1569"/>
        <source>Log&amp;arithmic</source>
        <translation>对数(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1572"/>
        <location filename="../qtractorMainForm.ui" line="1575"/>
        <source>Automation logarithmic</source>
        <translation>自动化对数</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1578"/>
        <source>Automation curve logarithmic scale</source>
        <translation>自动化曲线对数刻度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1586"/>
        <source>C&amp;olor...</source>
        <translation>颜色(&amp;O)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1589"/>
        <location filename="../qtractorMainForm.ui" line="1592"/>
        <source>Automation color</source>
        <translation>自动化颜色</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1595"/>
        <source>Automation curve color</source>
        <translation>自动化曲线颜色</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1603"/>
        <source>&amp;Lock</source>
        <translation>锁定(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1606"/>
        <location filename="../qtractorMainForm.ui" line="1609"/>
        <source>Automation lock</source>
        <translation>自动化锁定</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1612"/>
        <source>Lock automation curve</source>
        <translation>锁定自动化曲线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1620"/>
        <location filename="../qtractorMainForm.ui" line="2877"/>
        <source>&amp;Play</source>
        <translation>播放(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1623"/>
        <location filename="../qtractorMainForm.ui" line="1626"/>
        <source>Automation playback</source>
        <translation>自动化播放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1629"/>
        <source>Playback automation curve</source>
        <translation>播放自动化曲线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1640"/>
        <location filename="../qtractorMainForm.ui" line="1643"/>
        <source>Automation record</source>
        <translation>自动化录制</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1646"/>
        <source>Record automation curve</source>
        <translation>录制自动化曲线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1651"/>
        <source>&amp;Clear</source>
        <translation>清除(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1654"/>
        <location filename="../qtractorMainForm.ui" line="1657"/>
        <source>Automation clear</source>
        <translation>自动化清除</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1660"/>
        <source>Clear automation curve</source>
        <translation>清除自动化曲线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1668"/>
        <source>Loc&amp;k All</source>
        <translation>全部锁定(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1671"/>
        <location filename="../qtractorMainForm.ui" line="1674"/>
        <source>Automation lock all</source>
        <translation>自动化全部锁定</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1677"/>
        <source>Lock all automation curves</source>
        <translation>锁定所有自动化曲线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1685"/>
        <source>Play &amp;All</source>
        <translation>全部播放(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1688"/>
        <location filename="../qtractorMainForm.ui" line="1691"/>
        <source>Automation playback all</source>
        <translation>自动化全部播放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1694"/>
        <source>Playback all automation curves</source>
        <translation>播放所有自动化曲线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1702"/>
        <source>Rec&amp;ord All</source>
        <translation>全部录制(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1705"/>
        <location filename="../qtractorMainForm.ui" line="1708"/>
        <source>Automation record all</source>
        <translation>自动化全部录制</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1711"/>
        <source>Record all automation curves</source>
        <translation>录制所有自动化曲线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1716"/>
        <source>C&amp;lear All</source>
        <translation>全部清除(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1719"/>
        <location filename="../qtractorMainForm.ui" line="1722"/>
        <source>Automation clear all</source>
        <translation>自动化全部清除</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1725"/>
        <source>Clear all automation curves</source>
        <translation>清除所有自动化曲线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1733"/>
        <source>&amp;New...</source>
        <translation>新建(&amp;N)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1736"/>
        <source>New Clip</source>
        <translation>新建剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1739"/>
        <source>New clip</source>
        <translation>新建剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1742"/>
        <source>Create new clip</source>
        <translation>创建新剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1750"/>
        <source>&amp;Edit...</source>
        <translation>编辑(&amp;E)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1753"/>
        <source>Edit Clip</source>
        <translation>编辑剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1756"/>
        <source>Edit clip</source>
        <translation>编辑剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1759"/>
        <source>Edit current clip</source>
        <translation>编辑当前剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1762"/>
        <source>F4</source>
        <translation>F4</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1773"/>
        <source>Mute Clip</source>
        <translation>静音剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1776"/>
        <source>Mute clip</source>
        <translation>静音剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1779"/>
        <source>Mute current clip</source>
        <translation>将当前剪辑静音</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1787"/>
        <source>&amp;Unlink</source>
        <translation>取消链接(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1790"/>
        <source>Unlink Clip</source>
        <translation>取消链接剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1793"/>
        <source>Unlink clip</source>
        <translation>取消链接剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1796"/>
        <source>Unlink current clip</source>
        <translation>取消链接当前剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1807"/>
        <source>Recor&amp;d</source>
        <translation>录制(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1810"/>
        <source>Record Clip</source>
        <translation>录制剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1813"/>
        <source>Record clip</source>
        <translation>录制剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1816"/>
        <source>Record current clip (overdub)</source>
        <translation>录制当前剪辑 (叠加)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1821"/>
        <source>&amp;Split</source>
        <translation>分割(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1824"/>
        <source>Split Clip</source>
        <translation>分割剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1827"/>
        <source>Split clip</source>
        <translation>分割剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1830"/>
        <source>Split current clip at playhead</source>
        <translation>在播放头处分割当前剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1835"/>
        <source>&amp;Merge...</source>
        <translation>合并(&amp;M)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1838"/>
        <source>Merge Clips</source>
        <translation>合并剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1841"/>
        <source>Merge clips</source>
        <translation>合并剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1844"/>
        <source>Merge selected clips</source>
        <translation>合并选中的剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1849"/>
        <source>Normali&amp;ze</source>
        <translation>标准化(&amp;Z)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1852"/>
        <location filename="../qtractorMainForm.ui" line="1894"/>
        <source>Normalize Clip</source>
        <translation>标准化剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1855"/>
        <source>Normalize clip</source>
        <translation>标准化剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1858"/>
        <source>Normalize current clip (gain/volume)</source>
        <translation>标准化当前剪辑 (增益/音量)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1863"/>
        <source>&amp;Quantize...</source>
        <translation>量化(&amp;Q)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1866"/>
        <source>Quantize Clip</source>
        <translation>量化剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1869"/>
        <source>Quantize clip events</source>
        <translation>量化剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1872"/>
        <source>Quantize current MIDI clip events</source>
        <translation>量化当前 MIDI 剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1877"/>
        <source>&amp;Transpose...</source>
        <translation>移调(&amp;T)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1880"/>
        <source>Transpose Clip</source>
        <translation>移调剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1883"/>
        <source>Transpose clip events</source>
        <translation>移调剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1886"/>
        <source>Transpose current MIDI clip events</source>
        <translation>移调当前 MIDI 剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1891"/>
        <source>&amp;Normalize...</source>
        <translation>标准化(&amp;N)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1897"/>
        <source>Normalize clip events</source>
        <translation>标准化剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1900"/>
        <source>Normalize current MIDI clip events</source>
        <translation>标准化当前 MIDI 剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1905"/>
        <source>&amp;Randomize...</source>
        <translation>随机化(&amp;R)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1908"/>
        <source>Randomize Clip</source>
        <translation>随机化剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1911"/>
        <source>Randomize clip events</source>
        <translation>随机化剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1914"/>
        <source>Randomize current MIDI clip events</source>
        <translation>随机化当前 MIDI 剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1919"/>
        <source>Resi&amp;ze...</source>
        <translation>调整(&amp;Z)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1922"/>
        <source>Resize Clip</source>
        <translation>调整剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1925"/>
        <source>Resize clip events</source>
        <translation>调整剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1928"/>
        <source>Resize current MIDI clip events</source>
        <translation>调整当前 MIDI 剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1933"/>
        <source>Re&amp;scale...</source>
        <translation>缩放(&amp;S)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1936"/>
        <source>Rescale Clip</source>
        <translation>缩放剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1939"/>
        <source>Rescale clip events</source>
        <translation>缩放剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1942"/>
        <source>Rescale current MIDI clip events</source>
        <translation>缩放当前 MIDI 剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1947"/>
        <source>T&amp;imeshift...</source>
        <translation>时间偏移(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1950"/>
        <source>Timeshift Clip</source>
        <translation>时间偏移剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1953"/>
        <source>Timeshift clip events</source>
        <translation>时间偏移剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1956"/>
        <source>Timeshift current MIDI clip events</source>
        <translation>时间偏移当前 MIDI 剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1961"/>
        <source>T&amp;empo ramp...</source>
        <translation>速度渐变(&amp;E)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1964"/>
        <source>Tempo ramp Clip</source>
        <translation>速度渐变剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1967"/>
        <source>Tempo ramp clip events</source>
        <translation>速度渐变剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1970"/>
        <source>Tempo ramp current MIDI clip events</source>
        <translation>速度渐变当前 MIDI 剪辑事件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1975"/>
        <source>&amp;Tempo Adjust...</source>
        <translation>速度调整(&amp;T)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1978"/>
        <location filename="../qtractorMainForm.ui" line="1981"/>
        <source>Tempo Adjust</source>
        <translation>速度调整</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1984"/>
        <source>Adjust session tempo from current clip selection</source>
        <translation>从当前剪辑选择调整工程速度</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1987"/>
        <source>F7</source>
        <translation>F7</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1992"/>
        <source>&amp;Cross Fade</source>
        <translation>交叉淡化(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1995"/>
        <source>Clip Cross-fade</source>
        <translation>剪辑交叉淡化</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="1998"/>
        <source>Clip cross-fade</source>
        <translation>剪辑交叉淡化</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2001"/>
        <source>Cross-fade current overlapped clips</source>
        <translation>交叉淡化当前重叠的剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2006"/>
        <source>&amp;Range Set</source>
        <translation>设置范围(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2009"/>
        <source>Clip Range</source>
        <translation>剪辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2012"/>
        <source>Clip range</source>
        <translation>剪辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2015"/>
        <source>Set edit-range from current clip extents</source>
        <translation>从当前剪辑边界设置编辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2023"/>
        <source>&amp;Loop Set</source>
        <translation>设置循环(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2026"/>
        <source>Clip Loop</source>
        <translation>剪辑循环</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2029"/>
        <source>Clip loop</source>
        <translation>剪辑循环</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2032"/>
        <source>Set loop-range from current clip extents</source>
        <translation>从当前剪辑边界设置循环范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2037"/>
        <source>&amp;Import...</source>
        <translation>导入(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2040"/>
        <source>Import Clip</source>
        <translation>导入剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2043"/>
        <source>Import clip</source>
        <translation>导入剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2046"/>
        <source>Import clip from file(s)</source>
        <translation>从文件导入剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2051"/>
        <source>E&amp;xport...</source>
        <translation>导出(&amp;X)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2054"/>
        <source>Export Clip</source>
        <translation>导出剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2057"/>
        <source>Export clip</source>
        <translation>导出剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2060"/>
        <source>Export current clip to file</source>
        <translation>将当前剪辑导出到文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2068"/>
        <source>First Take</source>
        <translation>第一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2071"/>
        <source>First take</source>
        <translation>第一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2074"/>
        <source>Select current clip first take</source>
        <translation>选择当前剪辑的第一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2082"/>
        <source>Previous Take</source>
        <translation>上一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2085"/>
        <source>Previous take</source>
        <translation>上一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2088"/>
        <source>Select current clip previous take</source>
        <translation>选择当前剪辑的上一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2096"/>
        <source>Next Take</source>
        <translation>下一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2099"/>
        <source>Next take</source>
        <translation>下一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2102"/>
        <source>Select current clip next take</source>
        <translation>选择当前剪辑的下一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2105"/>
        <source>Shift+T</source>
        <translation>Shift+T</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2113"/>
        <source>Last Take</source>
        <translation>最后一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2116"/>
        <source>Last take</source>
        <translation>最后一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2119"/>
        <source>Select current clip last take</source>
        <translation>选择当前剪辑的最后一个片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2127"/>
        <source>Reset Takes</source>
        <translation>重置片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2130"/>
        <source>Reset takes</source>
        <translation>重置片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2133"/>
        <source>Reset (unfold) current clip takes</source>
        <translation>重置(展开)当前剪辑的片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2138"/>
        <source>R&amp;ange...</source>
        <translation>范围(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2141"/>
        <source>Take Range</source>
        <translation>片段范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2144"/>
        <source>Take range</source>
        <translation>片段范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2147"/>
        <source>Range (fold) current clip into takes</source>
        <translation>将当前剪辑折叠为片段</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2155"/>
        <source>&amp;Menubar</source>
        <translation>菜单栏(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2158"/>
        <location filename="../qtractorMainForm.ui" line="2161"/>
        <source>Menubar</source>
        <translation>菜单栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2164"/>
        <source>Show/hide the main program window menubar</source>
        <translation>显示/隐藏主窗口菜单栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2167"/>
        <source>Ctrl+M</source>
        <translation>Ctrl+M</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2175"/>
        <source>&amp;Statusbar</source>
        <translation>状态栏(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2178"/>
        <location filename="../qtractorMainForm.ui" line="2181"/>
        <source>Statusbar</source>
        <translation>状态栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2184"/>
        <source>Show/hide the main program window statusbar</source>
        <translation>显示/隐藏主窗口状态栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2195"/>
        <source>File Toolbar</source>
        <translation>文件工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2198"/>
        <source>File toolbar</source>
        <translation>文件工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2201"/>
        <source>Show/hide main program window file toolbar</source>
        <translation>显示/隐藏主窗口文件工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2212"/>
        <source>Edit Toolbar</source>
        <translation>编辑工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2215"/>
        <source>Edit toolbar</source>
        <translation>编辑工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2218"/>
        <source>Show/hide main program window edit toolbar</source>
        <translation>显示/隐藏主窗口编辑工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2229"/>
        <source>Track Toolbar</source>
        <translation>轨道工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2232"/>
        <source>Track toolbar</source>
        <translation>轨道工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2235"/>
        <source>Show/hide main program window track toolbar</source>
        <translation>显示/隐藏主窗口轨道工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2246"/>
        <source>View Toolbar</source>
        <translation>视图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2249"/>
        <source>View toolbar</source>
        <translation>视图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2252"/>
        <source>Show/hide main program window view toolbar</source>
        <translation>显示/隐藏主窗口视图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2260"/>
        <source>&amp;Options</source>
        <translation>选项(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2263"/>
        <source>Options Toolbar</source>
        <translation>选项工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2266"/>
        <source>Options toolbar</source>
        <translation>选项工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2269"/>
        <source>Show/hide main program window options toolbar</source>
        <translation>显示/隐藏主窗口选项工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2280"/>
        <source>Transport Toolbar</source>
        <translation>走带工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2283"/>
        <source>Transport toolbar</source>
        <translation>走带工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2286"/>
        <source>Show/hide main program window transport toolbar</source>
        <translation>显示/隐藏主窗口走带工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2294"/>
        <source>T&amp;ime</source>
        <translation>时间(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2297"/>
        <source>Time Toolbar</source>
        <translation>时间工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2300"/>
        <source>Time toolbar</source>
        <translation>时间工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2303"/>
        <source>Show/hide main program window time toolbar</source>
        <translation>显示/隐藏主窗口时间工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2311"/>
        <source>Thum&amp;b</source>
        <translation>缩略图(&amp;B)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2314"/>
        <source>Thumb Toolbar</source>
        <translation>缩略图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2317"/>
        <source>Thumb toolbar</source>
        <translation>缩略图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2320"/>
        <source>Show/hide main program window thumb toolbar</source>
        <translation>显示/隐藏主窗口缩略图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2328"/>
        <source>Loc&amp;k Toolbars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2331"/>
        <location filename="../qtractorMainForm.ui" line="2334"/>
        <source>Lock Toolbar Positions</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2337"/>
        <source>Lock/unlock main program window toolbar positions</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2348"/>
        <source>File &amp;System</source>
        <translation>文件系统(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2351"/>
        <source>File System</source>
        <translation>文件系统</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2354"/>
        <source>File system</source>
        <translation>文件系统</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2357"/>
        <source>Show/hide the file system window</source>
        <translation>显示/隐藏文件系统窗口</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2368"/>
        <source>&amp;Files</source>
        <translation>文件(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2371"/>
        <location filename="../qtractorMainForm.ui" line="2374"/>
        <source>Files</source>
        <translation>文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2377"/>
        <source>Show/hide the files window</source>
        <translation>显示/隐藏文件窗口</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2388"/>
        <source>M&amp;essages</source>
        <translation>消息(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2391"/>
        <location filename="../qtractorMainForm.ui" line="2394"/>
        <source>Messages</source>
        <translation>消息</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2397"/>
        <source>Show/hide the messages window</source>
        <translation>显示/隐藏消息窗口</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2408"/>
        <source>&amp;Connections</source>
        <translation>连接(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2411"/>
        <location filename="../qtractorMainForm.ui" line="2414"/>
        <source>Connections</source>
        <translation>连接</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2417"/>
        <source>Show/hide the connections window</source>
        <translation>显示/隐藏连接窗口</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2420"/>
        <source>F8</source>
        <translation>F8</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2431"/>
        <source>Mi&amp;xer</source>
        <translation>混音器(&amp;X)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2434"/>
        <location filename="../qtractorMainForm.ui" line="2437"/>
        <source>Mixer</source>
        <translation>混音器</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2440"/>
        <source>Show/hide the mixer window</source>
        <translation>显示/隐藏混音器窗口</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2443"/>
        <source>F9</source>
        <translation>F9</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2451"/>
        <source>&amp;In</source>
        <translation>放大(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2454"/>
        <source>Zoom In</source>
        <translation>放大</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2457"/>
        <location filename="../qtractorMainForm.ui" line="2460"/>
        <source>Zoom in</source>
        <translation>放大</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2463"/>
        <source>Ctrl++</source>
        <translation>Ctrl++</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2471"/>
        <source>&amp;Out</source>
        <translation>缩小(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2474"/>
        <source>Zoom Out</source>
        <translation>缩小</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2477"/>
        <location filename="../qtractorMainForm.ui" line="2480"/>
        <source>Zoom out</source>
        <translation>缩小</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2483"/>
        <source>Ctrl+-</source>
        <translation>Ctrl+-</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2494"/>
        <source>Zoom Reset</source>
        <translation>重置缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2497"/>
        <location filename="../qtractorMainForm.ui" line="2500"/>
        <source>Zoom reset</source>
        <translation>重置缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2503"/>
        <source>Ctrl+1</source>
        <translation>Ctrl+1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2511"/>
        <source>&amp;Horizontal</source>
        <translation>水平(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2514"/>
        <source>Horizontal Zoom</source>
        <translation>水平缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2517"/>
        <source>Horizontal zoom</source>
        <translation>水平缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2520"/>
        <source>Horizontal zoom mode</source>
        <translation>水平缩放模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2528"/>
        <source>&amp;Vertical</source>
        <translation>垂直(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2531"/>
        <source>Vertical Zoom</source>
        <translation>垂直缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2534"/>
        <source>Vertical zoom</source>
        <translation>垂直缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2537"/>
        <source>Vertical zoom mode</source>
        <translation>垂直缩放模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2548"/>
        <source>All Zoom</source>
        <translation>全部缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2551"/>
        <source>All zoom</source>
        <translation>全部缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2554"/>
        <source>All zoom mode</source>
        <translation>全部缩放模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2562"/>
        <source>&amp;Grid</source>
        <translation>网格(&amp;G)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2565"/>
        <location filename="../qtractorMainForm.ui" line="2568"/>
        <source>Grid</source>
        <translation>网格</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2571"/>
        <source>Snap grid view mode</source>
        <translation>网格吸附视图模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2579"/>
        <source>&amp;Zebra</source>
        <translation>斑马线(&amp;Z)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2582"/>
        <location filename="../qtractorMainForm.ui" line="2585"/>
        <source>Zebra</source>
        <translation>斑马线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2588"/>
        <source>Bar zebra view mode</source>
        <translation>小节斑马线视图模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2596"/>
        <source>Too&amp;l Tips</source>
        <translation>工具提示(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2599"/>
        <location filename="../qtractorMainForm.ui" line="2602"/>
        <source>Tool tips</source>
        <translation>工具提示</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2605"/>
        <source>Floating tool tips view mode</source>
        <translation>浮动工具提示视图模式</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2610"/>
        <source>&amp;Refresh</source>
        <translation>刷新(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2613"/>
        <location filename="../qtractorMainForm.ui" line="2616"/>
        <source>Refresh</source>
        <translation>刷新</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2619"/>
        <source>Refresh views</source>
        <translation>刷新视图</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2622"/>
        <source>F5</source>
        <translation>F5</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2630"/>
        <source>&amp;Instruments...</source>
        <translation>乐器(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2633"/>
        <location filename="../qtractorMainForm.ui" line="2636"/>
        <source>Instruments</source>
        <translation>乐器</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2639"/>
        <source>Change instrument definitions and files</source>
        <translation>更改乐器定义和文件</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2647"/>
        <source>&amp;Controllers...</source>
        <translation>控制器(&amp;C)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2650"/>
        <location filename="../qtractorMainForm.ui" line="2653"/>
        <source>Controllers</source>
        <translation>控制器</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2656"/>
        <source>Change MIDI controllers configuration</source>
        <translation>更改 MIDI 控制器配置</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2664"/>
        <source>&amp;Buses...</source>
        <translation>总线(&amp;B)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2667"/>
        <location filename="../qtractorMainForm.ui" line="2670"/>
        <source>Buses</source>
        <translation>总线</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2673"/>
        <source>Change session bus definitions</source>
        <translation>更改工程总线定义</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2678"/>
        <source>Tempo M&amp;ap / Markers...</source>
        <translation>速度图谱/标记(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2681"/>
        <source>Tempo Map / Markers</source>
        <translation>速度图谱/标记</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2684"/>
        <source>Tempo map / markers</source>
        <translation>速度图谱/标记</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2687"/>
        <source>Change session tempo map / markers</source>
        <translation>更改工程速度图谱/标记</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2692"/>
        <source>&amp;Options...</source>
        <translation>选项(&amp;O)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2695"/>
        <location filename="../qtractorMainForm.ui" line="2698"/>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2701"/>
        <source>Change general application program options</source>
        <translation>更改应用程序常规选项</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2704"/>
        <source>F12</source>
        <translation>F12</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2712"/>
        <location filename="../qtractorMainForm.ui" line="2809"/>
        <source>&amp;Backward</source>
        <translation>后退(&amp;B)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2715"/>
        <location filename="../qtractorMainForm.ui" line="2718"/>
        <source>Backward</source>
        <translation>后退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2721"/>
        <source>Transport backward</source>
        <translation>走带后退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2724"/>
        <source>Backspace</source>
        <translation>Backspace</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2735"/>
        <source>Re&amp;wind</source>
        <translation>快退(&amp;W)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2738"/>
        <location filename="../qtractorMainForm.ui" line="2741"/>
        <source>Rewind</source>
        <translation>快退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2744"/>
        <source>Transport rewind</source>
        <translation>走带快退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2755"/>
        <source>F&amp;ast Forward</source>
        <translation>快进(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2758"/>
        <source>Fast Forward</source>
        <translation>快进</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2761"/>
        <source>Fast forward</source>
        <translation>快进</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2764"/>
        <source>Transport fast forward</source>
        <translation>走带快进</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2772"/>
        <location filename="../qtractorMainForm.ui" line="2823"/>
        <source>&amp;Forward</source>
        <translation>前进(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2775"/>
        <location filename="../qtractorMainForm.ui" line="2778"/>
        <source>Forward</source>
        <translation>前进</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2781"/>
        <source>Transport forward</source>
        <translation>走带前进</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2792"/>
        <source>&amp;Loop</source>
        <translation>循环(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2795"/>
        <location filename="../qtractorMainForm.ui" line="2798"/>
        <source>Loop</source>
        <translation>循环</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2801"/>
        <source>Transport loop</source>
        <translation>走带循环</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2804"/>
        <source>Ctrl+Shift+L</source>
        <translation>Ctrl+Shift+L</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2812"/>
        <source>Step Backward</source>
        <translation>步退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2815"/>
        <source>Step backward</source>
        <translation>步退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2818"/>
        <source>Transport step backward</source>
        <translation>走带步退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2826"/>
        <source>Step Forward</source>
        <translation>步进</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2829"/>
        <source>Step forward</source>
        <translation>步进</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2832"/>
        <source>Transport step forward</source>
        <translation>走带步进</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2837"/>
        <source>Loop &amp;Set</source>
        <translation>设置循环(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2840"/>
        <source>Loop Set</source>
        <translation>设置循环</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2843"/>
        <source>Loop set</source>
        <translation>设置循环</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2846"/>
        <source>Transport loop set</source>
        <translation>走带循环设置</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2849"/>
        <source>Ctrl+L</source>
        <translation>Ctrl+L</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2857"/>
        <source>&amp;Stop</source>
        <translation>停止(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2860"/>
        <location filename="../qtractorMainForm.ui" line="2863"/>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2866"/>
        <source>Transport stop</source>
        <translation>走带停止</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2880"/>
        <location filename="../qtractorMainForm.ui" line="2883"/>
        <source>Play</source>
        <translation>播放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2886"/>
        <source>Transport play/pause</source>
        <translation>走带播放/暂停</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2889"/>
        <source>Space</source>
        <translation>Space</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2903"/>
        <location filename="../qtractorMainForm.ui" line="2906"/>
        <source>Record</source>
        <translation>录制</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2909"/>
        <source>Transport record</source>
        <translation>走带录制</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2920"/>
        <source>&amp;Punch</source>
        <translation>插入录音(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2923"/>
        <source>Punch</source>
        <translation>插入录音</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2926"/>
        <source>Punch in/out</source>
        <translation>插入录音</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2929"/>
        <source>Transport punch in/out</source>
        <translation>走带插入录音</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2932"/>
        <source>Ctrl+Shift+P</source>
        <translation>Ctrl+Shift+P</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2937"/>
        <source>Punch Se&amp;t</source>
        <translation>设置插入录音(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2940"/>
        <source>Punch Set</source>
        <translation>设置插入录音</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2943"/>
        <source>Punch in/out set</source>
        <translation>插入录音设置</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2946"/>
        <source>Transport punch in/out set</source>
        <translation>走带插入录音设置</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2949"/>
        <source>Ctrl+P</source>
        <translation>Ctrl+P</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2960"/>
        <source>&amp;Count-in</source>
        <translation>预备拍(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2963"/>
        <location filename="../qtractorMainForm.ui" line="2966"/>
        <location filename="../qtractorMainForm.ui" line="2969"/>
        <source>Count-in</source>
        <translation>预备拍</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2980"/>
        <source>&amp;Metronome</source>
        <translation>节拍器(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="2983"/>
        <location filename="../qtractorMainForm.ui" line="2986"/>
        <location filename="../qtractorMainForm.ui" line="2989"/>
        <source>Metronome</source>
        <translation>节拍器</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3000"/>
        <source>F&amp;ollow Playhead</source>
        <translation>跟随播放头(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3003"/>
        <source>Follow Playhead</source>
        <translation>跟随播放头</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3006"/>
        <location filename="../qtractorMainForm.ui" line="3009"/>
        <source>Follow playhead</source>
        <translation>跟随播放头</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3020"/>
        <source>A&amp;uto Backward</source>
        <translation>自动后退(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3023"/>
        <source>Auto Backward</source>
        <translation>自动后退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3026"/>
        <location filename="../qtractorMainForm.ui" line="3029"/>
        <source>Auto backward</source>
        <translation>自动后退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3040"/>
        <source>&amp;Continue Past End</source>
        <translation>超出末尾继续(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3043"/>
        <source>Continue Past End</source>
        <translation>超出末尾继续</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3046"/>
        <location filename="../qtractorMainForm.ui" line="3049"/>
        <source>Continue past end</source>
        <translation>超出末尾继续</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3066"/>
        <source>Transport mode: None</source>
        <translation>走带模式：无</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3069"/>
        <source>Transport mode set to None</source>
        <translation>走带模式设置为无</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3080"/>
        <source>&amp;Slave</source>
        <translation>从属(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3083"/>
        <source>Slave</source>
        <translation>从属</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3086"/>
        <source>Transport mode: Slave</source>
        <translation>走带模式：从属</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3089"/>
        <source>Transport mode set to Slave</source>
        <translation>走带模式设置为从属</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3100"/>
        <source>&amp;Master</source>
        <translation>主控(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3103"/>
        <source>Master</source>
        <translation>主控</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3106"/>
        <source>Transport mode: Master</source>
        <translation>走带模式：主控</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3109"/>
        <source>Transport mode set to Master</source>
        <translation>走带模式设置为主控</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3120"/>
        <source>&amp;Full</source>
        <translation>全部(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3123"/>
        <source>Full</source>
        <translation>全部</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3126"/>
        <source>Transport mode: Full</source>
        <translation>走带模式：全部</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3129"/>
        <source>Transport mode set to Full</source>
        <translation>走带模式设置为全部</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3137"/>
        <source>Pa&amp;nic</source>
        <translation>紧急停止(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3140"/>
        <location filename="../qtractorMainForm.ui" line="3143"/>
        <source>Panic</source>
        <translation>紧急停止</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3146"/>
        <source>All MIDI tracks shut off (panic)</source>
        <translation>关闭所有 MIDI 轨道 (紧急停止)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3154"/>
        <source>&amp;Shortcuts...</source>
        <translation>快捷键(&amp;S)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3157"/>
        <location filename="../qtractorMainForm.ui" line="3160"/>
        <source>Shortcuts</source>
        <translation>快捷键</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3163"/>
        <source>Keyboard shortcuts</source>
        <translation>键盘快捷键</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3168"/>
        <source>&amp;About...</source>
        <translation>关于(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3171"/>
        <location filename="../qtractorMainForm.ui" line="3174"/>
        <location filename="../qtractorMainForm.cpp" line="6637"/>
        <source>About</source>
        <translation>关于</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3177"/>
        <source>Show information about this application program</source>
        <translation>显示此应用程序的信息</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3182"/>
        <source>About &amp;Qt...</source>
        <translation>关于 Qt(&amp;Q)...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3185"/>
        <location filename="../qtractorMainForm.ui" line="3188"/>
        <source>About Qt</source>
        <translation>关于 Qt</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3191"/>
        <source>Show information about the Qt toolkit</source>
        <translation>显示 Qt 工具包的信息</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="561"/>
        <source>Current tempo (BPM)</source>
        <translation>当前速度 (BPM)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="577"/>
        <source>Snap/beat</source>
        <translation>吸附/拍</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="637"/>
        <source>Track</source>
        <translation>轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="640"/>
        <source>Current track name</source>
        <translation>当前轨道名称</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="653"/>
        <location filename="../qtractorMainForm.cpp" line="7016"/>
        <source>MOD</source>
        <translation>已修改</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="656"/>
        <source>Session modification state</source>
        <translation>工程修改状态</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="662"/>
        <location filename="../qtractorMainForm.cpp" line="7021"/>
        <source>REC</source>
        <translation>录音</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="665"/>
        <source>Session record state</source>
        <translation>工程录音状态</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="671"/>
        <location filename="../qtractorMainForm.cpp" line="7026"/>
        <source>MUTE</source>
        <translation>静音</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="674"/>
        <source>Session muting state</source>
        <translation>工程静音状态</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="680"/>
        <location filename="../qtractorMainForm.cpp" line="7031"/>
        <source>SOLO</source>
        <translation>独奏</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="683"/>
        <source>Session soloing state</source>
        <translation>工程独奏状态</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="689"/>
        <location filename="../qtractorMainForm.cpp" line="7036"/>
        <source>LOOP</source>
        <translation>循环</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="692"/>
        <source>Session looping state</source>
        <translation>工程循环状态</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="710"/>
        <source>Session total time</source>
        <translation>工程总时间</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="729"/>
        <source>Session sample rate</source>
        <translation>工程采样率</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="1744"/>
        <source>Could not set default session directory:

%1

Sorry.</source>
        <translation>无法设置默认工程目录：

%1

抱歉。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="1703"/>
        <source>Ready</source>
        <translation>就绪</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="702"/>
        <source>Session XRUN state</source>
        <translation>工程 XRUN 状态</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="720"/>
        <source>Session buffer size</source>
        <translation>工程缓冲区大小</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2048"/>
        <location filename="../qtractorMainForm.cpp" line="8896"/>
        <source>Untitled%1</source>
        <translation>未命名%1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2097"/>
        <location filename="../qtractorMainForm.cpp" line="3065"/>
        <source>New session: &quot;%1&quot;.</source>
        <translation>新建工程：&quot;%1&quot;。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2118"/>
        <source>Session files (*.%1 *.%2 *.%3)</source>
        <translation>工程文件 (*.%1 *.%2 *.%3)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2122"/>
        <source>Session files (*.%1 *.%2)</source>
        <translation>工程文件 (*.%1 *.%2)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2125"/>
        <source>Template files (*.%1)</source>
        <translation>模板文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2128"/>
        <source>Archive files (*.%1)</source>
        <translation>归档文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2131"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2136"/>
        <source>Open Session</source>
        <translation>打开工程</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2214"/>
        <source>Default session files (*.%1)</source>
        <translation>默认工程文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2231"/>
        <source>Regular session files (*.%1)</source>
        <translation>常规工程文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2239"/>
        <source>Template session files (*.%1)</source>
        <translation>模板工程文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2248"/>
        <source>Archive session files (*.%1)</source>
        <translation>归档工程文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2255"/>
        <source>Save Session</source>
        <translation>保存工程</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2322"/>
        <location filename="../qtractorMainForm.cpp" line="2414"/>
        <location filename="../qtractorMainForm.cpp" line="2476"/>
        <location filename="../qtractorMainForm.cpp" line="2587"/>
        <location filename="../qtractorMainForm.cpp" line="2751"/>
        <location filename="../qtractorMainForm.cpp" line="2793"/>
        <location filename="../qtractorMainForm.cpp" line="3269"/>
        <location filename="../qtractorMainForm.cpp" line="4566"/>
        <location filename="../qtractorMainForm.cpp" line="4668"/>
        <location filename="../qtractorMainForm.cpp" line="7273"/>
        <location filename="../qtractorMainForm.cpp" line="8582"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2323"/>
        <source>The file already exists:

&quot;%1&quot;

Do you want to replace it?</source>
        <translation>文件已存在：

&quot;%1&quot;

是否替换？</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2354"/>
        <source>Backup session: &quot;%1&quot; as &quot;%2&quot;.</source>
        <translation>备份工程：&quot;%1&quot; 为 &quot;%2&quot;。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2358"/>
        <source>Could not backup existing session:

%1 as %2

Sorry.</source>
        <translation>无法备份现有工程：

%1 为 %2

抱歉。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2415"/>
        <source>The current session has been changed:

&quot;%1&quot;

Do you want to save the changes?</source>
        <translation>当前工程已更改：

&quot;%1&quot;

是否保存更改？</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2477"/>
        <source>About to remove archive directory:

&quot;%1&quot;

Are you sure?</source>
        <translation>即将删除归档目录：

&quot;%1&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2516"/>
        <source>Session closed.</source>
        <translation>工程已关闭。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2588"/>
        <source>The directory already exists:

&quot;%1&quot;

Do you want to replace it?</source>
        <translation>目录已存在：

&quot;%1&quot;

是否替换？</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2630"/>
        <source>Opening &quot;%1&quot;...</source>
        <translation>正在打开 &quot;%1&quot;...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2697"/>
        <source>Session could not be loaded
from &quot;%1&quot;.

Sorry.</source>
        <translation>无法从 &quot;%1&quot;
加载工程。

抱歉。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2710"/>
        <source>Open session: &quot;%1&quot;.</source>
        <translation>打开工程：&quot;%1&quot;。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2752"/>
        <source>A directory with same name already exists:

&quot;%1&quot;

This directory will be replaced, erasing all its current data,
when opening and extracting this archive in the future.

Do you want to continue?</source>
        <translation>已存在同名目录：

&quot;%1&quot;

将来打开和提取此归档时，
该目录将被替换，
其所有当前数据将被擦除。

是否继续？</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2794"/>
        <source>The directory is an extracted archive:

&quot;%1&quot;

This directory will be removed,
erased from all its current data,
when closing this session.

Do you want to continue?</source>
        <translation>该目录是一个已提取的归档：

&quot;%1&quot;

关闭此工程时，
该目录将被删除，
其所有当前数据将被擦除。

是否继续？</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2829"/>
        <source>Saving &quot;%1&quot;...</source>
        <translation>正在保存 &quot;%1&quot;...</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2917"/>
        <source>Session could not be saved
to &quot;%1&quot;.

Sorry.</source>
        <translation>无法将工程保存
到 &quot;%1&quot;。

抱歉。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2926"/>
        <source>Save session: &quot;%1&quot;.</source>
        <translation>保存工程：&quot;%1&quot;。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="3270"/>
        <source>Oops!

Looks like it crashed or did not close properly last time it was run... however, an auto-saved session file exists:

&quot;%1&quot;

Do you want to crash-recover from it?</source>
        <translation>哎呀！

看起来上次运行时崩溃或未正确关闭...不过，存在一个自动保存的工程文件：

&quot;%1&quot;

是否要从中进行崩溃恢复？</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="4567"/>
        <source>About to clear automation:

&quot;%1&quot;

Are you sure?</source>
        <translation>即将清除自动化：

&quot;%1&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="4669"/>
        <source>About to clear all automation:

&quot;%1&quot;

Are you sure?</source>
        <translation>即将清除全部自动化：

&quot;%1&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="5133"/>
        <source>take range</source>
        <translation>片段范围</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="5762"/>
        <source>session</source>
        <translation>工程</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="5765"/>
        <source> or </source>
        <translation> 或 </translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="5766"/>
        <source>program</source>
        <translation>程序</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="5770"/>
        <source>Information</source>
        <translation>信息</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="5771"/>
        <source>Some settings may be only effective
next time you start this %1.</source>
        <translation>某些设置可能仅在
下次启动此 %1 时生效。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6431"/>
        <source>Player panic!</source>
        <translation>播放器紧急停止！</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6475"/>
        <source>Debugging option enabled.</source>
        <translation>调试选项已启用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6478"/>
        <source>Ogg Vorbis (libvorbis) file support disabled.</source>
        <translation>Ogg Vorbis (libvorbis) 文件支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6481"/>
        <source>MPEG-1 Audio Layer 3 (libmad) file support disabled.</source>
        <translation>MPEG-1 Audio Layer 3 (libmad) 文件支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6484"/>
        <source>Sample-rate conversion (libsamplerate) disabled.</source>
        <translation>采样率转换 (libsamplerate) 已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6487"/>
        <source>Pitch-shifting support (librubberband) disabled.</source>
        <translation>移调支持 (librubberband) 已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6490"/>
        <source>OSC service support (liblo) disabled.</source>
        <translation>OSC 服务支持 (liblo) 已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6493"/>
        <source>LADSPA Plug-in support disabled.</source>
        <translation>LADSPA 插件支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6496"/>
        <source>DSSI Plug-in support disabled.</source>
        <translation>DSSI 插件支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6505"/>
        <source>CLAP Plug-in support disabled.</source>
        <translation>CLAP 插件支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6508"/>
        <source>LV2 Plug-in support disabled.</source>
        <translation>LV2 插件支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6514"/>
        <source>LV2 Plug-in UI support disabled.</source>
        <translation>LV2 插件 UI 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6518"/>
        <source>LV2 Plug-in UI support (libsuil) disabled.</source>
        <translation>LV2 插件 UI 支持 (libsuil) 已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6526"/>
        <source>LV2 Plug-in MIDI/Event support (DEPRECATED) enabled.</source>
        <translation>LV2 插件 MIDI/事件支持 (已弃用) 已启用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6529"/>
        <source>LV2 Plug-in MIDI/Atom support disabled.</source>
        <translation>LV2 插件 MIDI/Atom 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6542"/>
        <source>LV2 Plug-in State Files support disabled.</source>
        <translation>LV2 插件 State 文件支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6548"/>
        <source>LV2 Plug-in MIDNAM support disabled.</source>
        <translation>LV2 插件 MIDNAM 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6554"/>
        <source>LV2 Plug-in Patch support disabled.</source>
        <translation>LV2 插件 Patch 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6567"/>
        <source>LV2 Plug-in UI Touch interface support disabled.</source>
        <translation>LV2 插件 UI Touch 接口支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6573"/>
        <source>LV2 Plug-in UI Idle interface support disabled.</source>
        <translation>LV2 插件 UI Idle 接口支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6576"/>
        <source>LV2 Plug-in UI Show interface support disabled.</source>
        <translation>LV2 插件 UI Show 接口支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6582"/>
        <source>LV2 Plug-in UI GTKMM2 native support disabled.</source>
        <translation>LV2 插件 UI GTKMM2 原生支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6596"/>
        <source>JACK Metadata support disabled.</source>
        <translation>JACK 元数据支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6614"/>
        <source>Using: Qt %1</source>
        <translation>使用：Qt %1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="7041"/>
        <source>XRUN</source>
        <translation>XRUN</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="7274"/>
        <source>The following issues were detected:

%1

Saving into another session file is highly recommended.</source>
        <translation>检测到以下问题：

%1

强烈建议保存到另一个工程文件。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8597"/>
        <source>Don&apos;t show this again</source>
        <translation>不再显示</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8792"/>
        <source>The audio engine buffer size has changed,
increased from %1 to %2 frames/period.

Reloading the current session file
is highly recommended.</source>
        <translation>音频引擎缓冲区大小已更改，
从每周期 %1 帧增加到 %2 帧。

强烈建议重新加载当前工程文件。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9055"/>
        <source>TRACK MONITOR %1 %2</source>
        <translation>轨道监听 %1 %2</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="471"/>
        <source>Set current snap to %1</source>
        <translation>设置当前吸附为 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="548"/>
        <source>Current time (play-head)</source>
        <translation>当前时间 (播放头)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6499"/>
        <source>VST2 Plug-in support disabled.</source>
        <translation>VST2 插件支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6502"/>
        <source>VST3 Plug-in support disabled.</source>
        <translation>VST3 插件支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6511"/>
        <source>LV2 Plug-in support (liblilv) disabled.</source>
        <translation>LV2 插件支持 (liblilv) 已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6522"/>
        <source>LV2 Plug-in External UI support disabled.</source>
        <translation>LV2 插件外部 UI 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6532"/>
        <source>LV2 Plug-in Worker/Schedule support disabled.</source>
        <translation>LV2 插件 Worker/Schedule 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6535"/>
        <source>LV2 Plug-in State support disabled.</source>
        <translation>LV2 插件 State 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6545"/>
        <source>LV2 Plug-in Programs support disabled.</source>
        <translation>LV2 插件 Programs 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6551"/>
        <source>LV2 Plug-in Presets support disabled.</source>
        <translation>LV2 插件 Presets 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6557"/>
        <source>LV2 Plug-in Time/position support disabled.</source>
        <translation>LV2 插件 Time/position 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6560"/>
        <source>LV2 Plug-in Options support disabled.</source>
        <translation>LV2 插件 Options 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6563"/>
        <source>LV2 Plug-in Buf-size support disabled.</source>
        <translation>LV2 插件 Buf-size 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6570"/>
        <source>LV2 Plug-in UI Request-value support disabled.</source>
        <translation>LV2 插件 UI Request-value 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6590"/>
        <source>JACK Session support disabled.</source>
        <translation>JACK Session 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6593"/>
        <source>JACK Latency support disabled.</source>
        <translation>JACK 延迟支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6606"/>
        <source>Version</source>
        <translation>版本</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6626"/>
        <source>Website</source>
        <translation>网站</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6631"/>
        <source>This program is free software; you can redistribute it and/or modify it</source>
        <translation>本程序是自由软件；您可以基于 GNU 通用公共许可证</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6632"/>
        <source>under the terms of the GNU General Public License version 2 or later.</source>
        <translation>第 2 版或更高版本的条款重新分发和/或修改它。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6755"/>
        <source>record clip</source>
        <translation>录制剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6917"/>
        <source>[modified]</source>
        <translation>[已修改]</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="7155"/>
        <source>Session started.</source>
        <translation>工程已启动。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="7159"/>
        <source>The audio/MIDI engine could not be started.

Make sure the JACK/Pipewire audio service and
the ALSA Sequencer kernel module (snd-seq-midi)
are up and running and then restart the session.</source>
        <translation>无法启动音频/MIDI 引擎。

请确保 JACK/Pipewire 音频服务和
ALSA Sequencer 内核模块 (snd-seq-midi)
正在运行，然后重新启动工程。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="7245"/>
        <source>The original session sample rate (%1 Hz)
is not the same as the current audio engine (%2 Hz).

Saving and reloading from a new session file
is highly recommended.</source>
        <translation>原始工程采样率 (%1 Hz)
与当前音频引擎 (%2 Hz) 不同。

强烈建议保存并从新的工程文件重新加载。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="2491"/>
        <location filename="../qtractorMainForm.cpp" line="2602"/>
        <location filename="../qtractorMainForm.cpp" line="2770"/>
        <location filename="../qtractorMainForm.cpp" line="2811"/>
        <source>Don&apos;t ask this again</source>
        <translation>不再询问</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6539"/>
        <source>LV2 plug-in State Make Path support (DANGEROUS)	enabled.</source>
        <translation>LV2 插件 State Make Path 支持 (危险)	已启用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6579"/>
        <source>LV2 Plug-in UI GTK2 native support disabled.</source>
        <translation>LV2 插件 UI GTK2 原生支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6585"/>
        <source>LV2 Plug-in UI X11 native support disabled.</source>
        <translation>LV2 插件 UI X11 原生支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="6599"/>
        <source>NSM support disabled.</source>
        <translation>NSM 支持已禁用。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="7926"/>
        <source>&amp;Hold</source>
        <translation>保持(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="7931"/>
        <source>&amp;Linear</source>
        <translation>线性(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="7937"/>
        <source>&amp;Spline</source>
        <translation>样条(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8065"/>
        <source>Take %1</source>
        <translation>片段 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.ui" line="3063"/>
        <location filename="../qtractorMainForm.cpp" line="8072"/>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8162"/>
        <source>Error</source>
        <translation>错误</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8551"/>
        <source>XRUN(%1 skipped)</source>
        <translation>XRUN(已跳过 %1)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8556"/>
        <source>XRUN(%1): some frames might have been lost.</source>
        <translation>XRUN(%1)：可能丢失了一些帧。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8573"/>
        <source>Audio connections change.</source>
        <translation>音频连接更改。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8584"/>
        <source>Audio self-connection detected!

In general, connecting an output bus (or insert send),
directly into any input bus (or insert return),
is not advisable. It often doesn&apos;t work, if at all.
</source>
        <translation>检测到音频自连接！

通常，将输出总线 (或插入发送)
直接连接到任何输入总线 (或插入返回)
是不可取的。通常无法正常工作。
</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8615"/>
        <source>MIDI connections change.</source>
        <translation>MIDI 连接更改。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8636"/>
        <source>Playing ended.</source>
        <translation>播放结束。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8717"/>
        <source>The audio engine has been shutdown.

Make sure the JACK audio server (jackd)
is up and running and then restart session.</source>
        <translation>音频引擎已关闭。

请确保 JACK 音频服务器 (jackd)
正在运行，然后重新启动工程。</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8990"/>
        <location filename="../qtractorMainForm.cpp" line="9179"/>
        <source>STOP</source>
        <translation>停止</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="8997"/>
        <source>PLAY</source>
        <translation>播放</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9001"/>
        <source>FFWD</source>
        <translation>快进</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9005"/>
        <source>REW</source>
        <translation>快退</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9010"/>
        <source>REC ON</source>
        <translation>录音开启</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9018"/>
        <source>REC OFF</source>
        <translation>录音关闭</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9022"/>
        <source>RESET</source>
        <translation>重置</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9026"/>
        <source>LOCATE %1</source>
        <translation>定位 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9030"/>
        <source>SHUTTLE %1</source>
        <translation>穿梭 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9034"/>
        <source>STEP %1</source>
        <translation>步进 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9040"/>
        <source>TRACK RECORD %1 %2</source>
        <translation>轨道录音 %1 %2</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9045"/>
        <source>TRACK MUTE %1 %2</source>
        <translation>轨道静音 %1 %2</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9050"/>
        <source>TRACK SOLO %1 %2</source>
        <translation>轨道独奏 %1 %2</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9060"/>
        <source>Unknown sub-command</source>
        <translation>未知子命令</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9066"/>
        <location filename="../qtractorMainForm.cpp" line="9199"/>
        <source>Not implemented</source>
        <translation>未实现</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9079"/>
        <source>MIDI CTL: %1, Channel %2, Param %3, Value %4</source>
        <translation>MIDI 控制：%1，通道 %2，参数 %3，值 %4</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9129"/>
        <source>(track %1, gain %2)</source>
        <translation> (轨道 %1，增益 %2)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9151"/>
        <source>(track %1, panning %2)</source>
        <translation> (轨道 %1，声像 %2)</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9172"/>
        <source>START</source>
        <translation>开始</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9187"/>
        <source>CONTINUE</source>
        <translation>继续</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9193"/>
        <source>SONGPOS %1</source>
        <translation>歌曲位置 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9217"/>
        <source>%1 BPM</source>
        <translation>%1 BPM</translation>
    </message>
    <message>
        <location filename="../qtractorMainForm.cpp" line="9335"/>
        <location filename="../qtractorMainForm.cpp" line="9395"/>
        <source>Playing &quot;%1&quot;...</source>
        <translation>正在播放 &quot;%1&quot;...</translation>
    </message>
</context>
<context>
    <name>qtractorMessages</name>
    <message>
        <location filename="../qtractorMessages.cpp" line="115"/>
        <source>Messages</source>
        <translation>消息</translation>
    </message>
    <message>
        <location filename="../qtractorMessages.cpp" line="302"/>
        <source>Logging stopped --- %1 ---</source>
        <translation>日志已停止 --- %1 ---</translation>
    </message>
    <message>
        <location filename="../qtractorMessages.cpp" line="312"/>
        <source>Logging started --- %1 ---</source>
        <translation>日志已开始 --- %1 ---</translation>
    </message>
</context>
<context>
    <name>qtractorMidiControl</name>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="969"/>
        <source>Note On</source>
        <translation>音符开</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="970"/>
        <source>Note Off</source>
        <translation>音符关</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="971"/>
        <source>Key Press</source>
        <translation>键触后</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="972"/>
        <source>Controller</source>
        <translation>控制器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="973"/>
        <source>Pgm Change</source>
        <translation>音色改变</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="974"/>
        <source>Chan Press</source>
        <translation>通道触后</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="975"/>
        <source>Pitch Bend</source>
        <translation>弯音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="976"/>
        <source>RPN</source>
        <translation>RPN</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="977"/>
        <source>NRPN</source>
        <translation>NRPN</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="978"/>
        <source>Control 14</source>
        <translation>14 位控制</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="1055"/>
        <source>Track Gain</source>
        <translation>轨道增益</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="1056"/>
        <source>Track Panning</source>
        <translation>轨道声像</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="1057"/>
        <source>Track Monitor</source>
        <translation>轨道监听</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="1058"/>
        <source>Track Record</source>
        <translation>轨道录音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="1059"/>
        <source>Track Mute</source>
        <translation>轨道静音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControl.cpp" line="1060"/>
        <source>Track Solo</source>
        <translation>轨道独奏</translation>
    </message>
</context>
<context>
    <name>qtractorMidiControlForm</name>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="34"/>
        <source>Controllers</source>
        <translation>控制器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="43"/>
        <source>Controller files</source>
        <translation>控制器文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="59"/>
        <source>Files</source>
        <translation>文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="64"/>
        <source>Path</source>
        <translation>路径</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="72"/>
        <source>Import controller files</source>
        <translation>导入控制器文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="75"/>
        <source>&amp;Import...</source>
        <translation>导入(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="85"/>
        <source>Remove controller file</source>
        <translation>移除控制器文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="88"/>
        <source>&amp;Remove</source>
        <translation>移除(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="98"/>
        <source>Move controller file up on list order</source>
        <translation>在列表中将控制器文件上移</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="101"/>
        <source>&amp;Up</source>
        <translation>上移(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="111"/>
        <source>Move controller file down on list order</source>
        <translation>在列表中将控制器文件下移</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="114"/>
        <source>&amp;Down</source>
        <translation>下移(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="124"/>
        <source>&amp;Type</source>
        <translation>类型(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="137"/>
        <source>&amp;Channel</source>
        <translation>通道(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="150"/>
        <source>&amp;Parameter</source>
        <translation>参数(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="163"/>
        <source>Trac&amp;k</source>
        <translation>轨道(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="176"/>
        <source>offse&amp;t</source>
        <translation>偏移(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="189"/>
        <source>&amp;limit</source>
        <translation>限制(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="202"/>
        <source>C&amp;ommand</source>
        <translation>命令(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="215"/>
        <location filename="../qtractorMidiControlForm.ui" line="385"/>
        <source>Flags</source>
        <translation>标志</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="238"/>
        <source>MIDI Event type</source>
        <translation>MIDI 事件类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="245"/>
        <source>MIDI Channel</source>
        <translation>MIDI 通道</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="252"/>
        <source>MIDI Controller (parameter)</source>
        <translation>MIDI 控制器 (参数)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="259"/>
        <source>MIDI parameter (track offset)</source>
        <translation>MIDI 参数 (轨道偏移)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="262"/>
        <source>+</source>
        <translation>+</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="269"/>
        <source>Track offset</source>
        <translation>轨道偏移</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="282"/>
        <source>Track limit</source>
        <translation>轨道限制</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="295"/>
        <source>Command action</source>
        <translation>命令操作</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="302"/>
        <source>Command delta/momentary</source>
        <translation>命令增量/瞬时</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="305"/>
        <source>D&amp;elta</source>
        <translation>增量(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="312"/>
        <source>Command feedback</source>
        <translation>命令反馈</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="315"/>
        <source>&amp;Feedback</source>
        <translation>反馈(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="322"/>
        <source>Map/update controller command</source>
        <translation>映射/更新控制器命令</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="325"/>
        <source>&amp;Map</source>
        <translation>映射(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="341"/>
        <source>Controller map</source>
        <translation>控制器映射</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="360"/>
        <source>Type</source>
        <translation>类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="365"/>
        <source>Channel</source>
        <translation>通道</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="370"/>
        <source>Parameter</source>
        <translation>参数</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="375"/>
        <source>Track</source>
        <translation>轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="380"/>
        <source>Command</source>
        <translation>命令</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="776"/>
        <location filename="../qtractorMidiControlForm.cpp" line="869"/>
        <source>Feedback</source>
        <translation>反馈</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="393"/>
        <source>Unmap/remove controller command</source>
        <translation>取消映射/移除控制器命令</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="396"/>
        <source>U&amp;nmap</source>
        <translation>取消映射(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="419"/>
        <source>Enable all controllers immediate sync (hook)</source>
        <translation>启用所有控制器即时同步 (钩子)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="422"/>
        <source>&amp;Sync</source>
        <translation>同步(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="442"/>
        <source>Reload/apply all controller files</source>
        <translation>重新加载/应用所有控制器文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="445"/>
        <source>Relo&amp;ad</source>
        <translation>重新加载(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="455"/>
        <source>Export to controller file</source>
        <translation>导出到控制器文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="458"/>
        <source>E&amp;xport...</source>
        <translation>导出(&amp;X)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="468"/>
        <source>Close this dialog</source>
        <translation>关闭此对话框</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.ui" line="471"/>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="237"/>
        <source>Import Controller Files</source>
        <translation>导入控制器文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="240"/>
        <location filename="../qtractorMidiControlForm.cpp" line="458"/>
        <source>Controller files (*.%1)</source>
        <translation>控制器文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="241"/>
        <location filename="../qtractorMidiControlForm.cpp" line="459"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="322"/>
        <location filename="../qtractorMidiControlForm.cpp" line="508"/>
        <location filename="../qtractorMidiControlForm.cpp" line="523"/>
        <location filename="../qtractorMidiControlForm.cpp" line="561"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="323"/>
        <source>About to remove controller file:

&quot;%1&quot;

Are you sure?</source>
        <translation>即将删除控制器文件：

&quot;%1&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="455"/>
        <source>Export Controller File</source>
        <translation>导出控制器文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="464"/>
        <source>controller</source>
        <translation>控制器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="509"/>
        <source>The controller file already exists:

&quot;%1&quot;

Do you want to replace it?</source>
        <translation>控制器文件已存在：

&quot;%1&quot;

是否替换？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="524"/>
        <source>Saved controller mappings may not be effective
the next time you start this program.

&quot;%1&quot;

Do you want to apply to controller files?</source>
        <translation>已保存的控制器映射可能
在下次启动此程序时不会生效。

&quot;%1&quot;

是否保存更改？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="562"/>
        <source>Controller mappings have been changed.</source>
        <translation>控制器映射已更改。</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="563"/>
        <source>Do you want to save the changes?</source>
        <translation>是否保存更改？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlForm.cpp" line="775"/>
        <location filename="../qtractorMidiControlForm.cpp" line="867"/>
        <source>Delta</source>
        <translation>增量</translation>
    </message>
</context>
<context>
    <name>qtractorMidiControlObserverForm</name>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="43"/>
        <source>&amp;Type:</source>
        <translation>类型(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="56"/>
        <source>MIDI event type</source>
        <translation>MIDI 事件类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="76"/>
        <source>Cha&amp;nnel:</source>
        <translation>通道(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="89"/>
        <source>MIDI channel</source>
        <translation>MIDI 通道</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="115"/>
        <source>&amp;Parameter:</source>
        <translation>参数(&amp;P)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="128"/>
        <source>MIDI parameter</source>
        <translation>MIDI 参数</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="135"/>
        <source>&amp;Logarithmic</source>
        <translation>对数(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="142"/>
        <source>&amp;Feedback</source>
        <translation>反馈(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="149"/>
        <source>In&amp;vert</source>
        <translation>反转(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="156"/>
        <source>&amp;Hook</source>
        <translation>钩子(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="163"/>
        <source>L&amp;atch</source>
        <translation>锁定(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="185"/>
        <source>Control input connections</source>
        <translation>控制输入连接</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="188"/>
        <source>&amp;Inputs</source>
        <translation>输入(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="198"/>
        <source>Control output connections</source>
        <translation>控制输出连接</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="201"/>
        <source>&amp;Outputs</source>
        <translation>输出(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.ui" line="34"/>
        <location filename="../qtractorMidiControlObserverForm.cpp" line="192"/>
        <source>MIDI Controller</source>
        <translation>MIDI 控制器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.cpp" line="383"/>
        <source>MIDI controller is already assigned.

Do you want to replace the mapping?</source>
        <translation>MIDI 控制器已被分配。

是否替换此映射？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.cpp" line="429"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.cpp" line="572"/>
        <source>&amp;MIDI Controller...</source>
        <translation>MIDI 控制器(&amp;M)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.cpp" line="680"/>
        <source>&amp;Automation</source>
        <translation>自动化(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.cpp" line="694"/>
        <source>&amp;Lock</source>
        <translation>锁定(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.cpp" line="712"/>
        <source>&amp;Play</source>
        <translation>播放(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.cpp" line="728"/>
        <source>&amp;Record</source>
        <translation>录制(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlObserverForm.cpp" line="738"/>
        <source>&amp;Clear</source>
        <translation>清除(&amp;C)</translation>
    </message>
</context>
<context>
    <name>qtractorMidiControlPluginWidget</name>
    <message>
        <location filename="../qtractorMidiControlPluginWidget.ui" line="29"/>
        <source>&amp;Type:</source>
        <translation>类型(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPluginWidget.ui" line="42"/>
        <source>MIDI event type</source>
        <translation>MIDI 事件类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPluginWidget.ui" line="62"/>
        <source>Cha&amp;nnel:</source>
        <translation>通道(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPluginWidget.ui" line="75"/>
        <source>MIDI channel</source>
        <translation>MIDI 通道</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPluginWidget.ui" line="91"/>
        <source>&amp;Parameter:</source>
        <translation>参数(&amp;P)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPluginWidget.ui" line="104"/>
        <source>MIDI parameter</source>
        <translation>MIDI 参数</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPluginWidget.ui" line="111"/>
        <source>&amp;Logarithmic</source>
        <translation>对数(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPluginWidget.ui" line="118"/>
        <source>In&amp;vert</source>
        <translation>反转(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiControlPluginWidget.ui" line="125"/>
        <source>&amp;Bipolar</source>
        <translation>双极(&amp;B)</translation>
    </message>
</context>
<context>
    <name>qtractorMidiEditEvent</name>
    <message>
        <location filename="../qtractorMidiEditEvent.cpp" line="162"/>
        <source>Zoom in (horizontal)</source>
        <translation>放大 (水平)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditEvent.cpp" line="163"/>
        <source>Zoom out (horizontal)</source>
        <translation>缩小 (水平)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditEvent.cpp" line="164"/>
        <source>Zoom reset (horizontal)</source>
        <translation>重置缩放 (水平)</translation>
    </message>
</context>
<context>
    <name>qtractorMidiEditList</name>
    <message>
        <location filename="../qtractorMidiEditList.cpp" line="213"/>
        <source>C%1</source>
        <translation>C%1</translation>
    </message>
</context>
<context>
    <name>qtractorMidiEditTime</name>
    <message>
        <location filename="../qtractorMidiEditTime.cpp" line="939"/>
        <source>Play-head</source>
        <translation>播放头</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditTime.cpp" line="942"/>
        <source>Edit-head</source>
        <translation>编辑头</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditTime.cpp" line="945"/>
        <source>Edit-tail</source>
        <translation>编辑尾</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditTime.cpp" line="948"/>
        <source>Loop-start</source>
        <translation>循环起点</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditTime.cpp" line="951"/>
        <source>Loop-end</source>
        <translation>循环终点</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditTime.cpp" line="954"/>
        <source>Punch-in</source>
        <translation>插入录音入点</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditTime.cpp" line="957"/>
        <source>Punch-out</source>
        <translation>插入录音出点</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditTime.cpp" line="987"/>
        <source>Start:	%1
End:	%2
Length:	%3</source>
        <translation>开始：	%1
结束：	%2
长度：	%3</translation>
    </message>
</context>
<context>
    <name>qtractorMidiEditView</name>
    <message>
        <location filename="../qtractorMidiEditView.cpp" line="82"/>
        <source>Zoom in (vertical)</source>
        <translation>放大 (垂直)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditView.cpp" line="83"/>
        <source>Zoom out (vertical)</source>
        <translation>缩小 (垂直)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditView.cpp" line="84"/>
        <source>Zoom reset (vertical)</source>
        <translation>重置缩放 (垂直)</translation>
    </message>
</context>
<context>
    <name>qtractorMidiEditor</name>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="93"/>
        <source>C</source>
        <translation>C</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="94"/>
        <source>C#/Db</source>
        <translation>C#/Db</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="95"/>
        <source>D</source>
        <translation>D</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="96"/>
        <source>D#/Eb</source>
        <translation>D#/Eb</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="97"/>
        <source>E</source>
        <translation>E</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="98"/>
        <source>F</source>
        <translation>F</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="99"/>
        <source>F#/Gb</source>
        <translation>F#/Gb</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="100"/>
        <source>G</source>
        <translation>G</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="101"/>
        <source>G#/Ab</source>
        <translation>G#/Ab</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="102"/>
        <source>A</source>
        <translation>A</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="103"/>
        <source>A#/Bb</source>
        <translation>A#/Bb</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="104"/>
        <source>B</source>
        <translation>B</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="107"/>
        <source>Acoustic Bass Drum</source>
        <translation>原声低音鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="108"/>
        <source>Bass Drum 1</source>
        <translation>低音鼓 1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="109"/>
        <source>Side Stick</source>
        <translation>边击</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="110"/>
        <source>Acoustic Snare</source>
        <translation>原声军鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="111"/>
        <source>Hand Clap</source>
        <translation>拍手</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="112"/>
        <source>Electric Snare</source>
        <translation>电子军鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="113"/>
        <source>Low Floor Tom</source>
        <translation>低音落地筒鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="114"/>
        <source>Closed Hi-Hat</source>
        <translation>闭合踩镲</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="115"/>
        <source>High Floor Tom</source>
        <translation>高音落地筒鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="116"/>
        <source>Pedal Hi-Hat</source>
        <translation>踏板踩镲</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="117"/>
        <source>Low Tom</source>
        <translation>低音筒鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="118"/>
        <source>Open Hi-Hat</source>
        <translation>开镲</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="119"/>
        <source>Low-Mid Tom</source>
        <translation>中低音筒鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="120"/>
        <source>Hi-Mid Tom</source>
        <translation>中高音筒鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="121"/>
        <source>Crash Cymbal 1</source>
        <translation>碎镲 1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="122"/>
        <source>High Tom</source>
        <translation>高音筒鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="123"/>
        <source>Ride Cymbal 1</source>
        <translation>叮镲 1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="124"/>
        <source>Chinese Cymbal</source>
        <translation>中国镲</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="125"/>
        <source>Ride Bell</source>
        <translation>镲帽</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="126"/>
        <source>Tambourine</source>
        <translation>铃鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="127"/>
        <source>Splash Cymbal</source>
        <translation>水镲</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="128"/>
        <source>Cowbell</source>
        <translation>牛铃</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="129"/>
        <source>Crash Cymbal 2</source>
        <translation>碎镲 2</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="130"/>
        <source>Vibraslap</source>
        <translation>振击器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="131"/>
        <source>Ride Cymbal 2</source>
        <translation>叮镲 2</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="132"/>
        <source>Hi Bongo</source>
        <translation>高音邦戈</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="133"/>
        <source>Low Bongo</source>
        <translation>低音邦戈</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="134"/>
        <source>Mute Hi Conga</source>
        <translation>闷音高康加</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="135"/>
        <source>Open Hi Conga</source>
        <translation>开音高康加</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="136"/>
        <source>Low Conga</source>
        <translation>低音康加</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="137"/>
        <source>High Timbale</source>
        <translation>高音天巴鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="138"/>
        <source>Low Timbale</source>
        <translation>低音天巴鼓</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="139"/>
        <source>High Agogo</source>
        <translation>高音阿戈戈</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="140"/>
        <source>Low Agogo</source>
        <translation>低音阿戈戈</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="141"/>
        <source>Cabasa</source>
        <translation>卡巴萨</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="142"/>
        <source>Maracas</source>
        <translation>沙槌</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="143"/>
        <source>Short Whistle</source>
        <translation>短哨</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="144"/>
        <source>Long Whistle</source>
        <translation>长哨</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="145"/>
        <source>Short Guiro</source>
        <translation>短刮瓜</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="146"/>
        <source>Long Guiro</source>
        <translation>长刮瓜</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="147"/>
        <source>Claves</source>
        <translation>响棒</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="148"/>
        <source>Hi Wood Block</source>
        <translation>高音木鱼</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="149"/>
        <source>Low Wood Block</source>
        <translation>低音木鱼</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="150"/>
        <source>Mute Cuica</source>
        <translation>闷音奎卡</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="151"/>
        <source>Open Cuica</source>
        <translation>开音奎卡</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="152"/>
        <source>Mute Triangle</source>
        <translation>闷音三角铁</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="153"/>
        <source>Open Triangle</source>
        <translation>开音三角铁</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="201"/>
        <source>Bank Select (coarse)</source>
        <translation>音色库选择 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="202"/>
        <source>Modulation Wheel (coarse)</source>
        <translation>调制轮 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="203"/>
        <source>Breath Controller (coarse)</source>
        <translation>呼吸控制器 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="204"/>
        <source>Foot Pedal (coarse)</source>
        <translation>脚踏板 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="205"/>
        <source>Portamento Time (coarse)</source>
        <translation>滑音时间 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="206"/>
        <source>Data Entry (coarse)</source>
        <translation>数据输入 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="207"/>
        <source>Volume (coarse)</source>
        <translation>音量 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="208"/>
        <source>Balance (coarse)</source>
        <translation>平衡 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="209"/>
        <source>Pan Position (coarse)</source>
        <translation>声像位置 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="210"/>
        <source>Expression (coarse)</source>
        <translation>表情 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="211"/>
        <source>Effect Control 1 (coarse)</source>
        <translation>效果控制 1 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="212"/>
        <source>Effect Control 2 (coarse)</source>
        <translation>效果控制 2 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="213"/>
        <source>General Purpose Slider 1</source>
        <translation>通用滑块 1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="214"/>
        <source>General Purpose Slider 2</source>
        <translation>通用滑块 2</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="215"/>
        <source>General Purpose Slider 3</source>
        <translation>通用滑块 3</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="216"/>
        <source>General Purpose Slider 4</source>
        <translation>通用滑块 4</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="217"/>
        <source>Bank Select (fine)</source>
        <translation>音色库选择 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="218"/>
        <source>Modulation Wheel (fine)</source>
        <translation>调制轮 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="219"/>
        <source>Breath Controller (fine)</source>
        <translation>呼吸控制器 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="220"/>
        <source>Foot Pedal (fine)</source>
        <translation>脚踏板 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="221"/>
        <source>Portamento Time (fine)</source>
        <translation>滑音时间 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="222"/>
        <source>Data Entry (fine)</source>
        <translation>数据输入 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="223"/>
        <source>Volume (fine)</source>
        <translation>音量 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="224"/>
        <source>Balance (fine)</source>
        <translation>平衡 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="225"/>
        <source>Pan Position (fine)</source>
        <translation>声像位置 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="226"/>
        <source>Expression (fine)</source>
        <translation>表情 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="227"/>
        <source>Effect Control 1 (fine)</source>
        <translation>效果控制 1 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="228"/>
        <source>Effect Control 2 (fine)</source>
        <translation>效果控制 2 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="229"/>
        <source>Hold Pedal (on/off)</source>
        <translation>延音踏板 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="230"/>
        <source>Portamento (on/off)</source>
        <translation>滑音 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="232"/>
        <source>Soft Pedal (on/off)</source>
        <translation>弱音踏板 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="233"/>
        <source>Legato Pedal (on/off)</source>
        <translation>连奏踏板 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="234"/>
        <source>Hold 2 Pedal (on/off)</source>
        <translation>延音踏板 2 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="235"/>
        <source>Sound Variation</source>
        <translation>音色变化</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="244"/>
        <source>General Purpose Button 1 (on/off)</source>
        <translation>通用按钮 1 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="245"/>
        <source>General Purpose Button 2 (on/off)</source>
        <translation>通用按钮 2 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="246"/>
        <source>General Purpose Button 3 (on/off)</source>
        <translation>通用按钮 3 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="247"/>
        <source>General Purpose Button 4 (on/off)</source>
        <translation>通用按钮 4 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="248"/>
        <source>Effects Level</source>
        <translation>效果电平</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="250"/>
        <source>Chorus Level</source>
        <translation>合唱电平</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="251"/>
        <source>Celeste Level</source>
        <translation>钢片琴电平</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="252"/>
        <source>Phaser Level</source>
        <translation>移相器电平</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="253"/>
        <source>Data Button Increment</source>
        <translation>数据按钮递增</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="254"/>
        <source>Data Button Decrement</source>
        <translation>数据按钮递减</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="255"/>
        <source>Non-Registered Parameter (fine)</source>
        <translation>未注册参数 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="256"/>
        <source>Non-Registered Parameter (coarse)</source>
        <translation>未注册参数 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="257"/>
        <source>Registered Parameter (fine)</source>
        <translation>已注册参数 (微调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="258"/>
        <source>Registered Parameter (coarse)</source>
        <translation>已注册参数 (粗调)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="259"/>
        <source>All Sound Off</source>
        <translation>全部声音关闭</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="260"/>
        <source>All Controllers Off</source>
        <translation>全部控制器关闭</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="261"/>
        <source>Local Keyboard (on/off)</source>
        <translation>本地键盘 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="262"/>
        <source>All Notes Off</source>
        <translation>全部音符关闭</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="263"/>
        <source>Omni Mode Off</source>
        <translation>全通道模式关</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="264"/>
        <source>Omni Mode On</source>
        <translation>全通道模式开</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="265"/>
        <source>Mono Operation</source>
        <translation>单音操作</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="266"/>
        <source>Poly Operation</source>
        <translation>复音操作</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="311"/>
        <source>Pitch Bend Sensitivity</source>
        <translation>弯音灵敏度</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="312"/>
        <source>Fine Tune</source>
        <translation>微调</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="313"/>
        <source>Coarse Tune</source>
        <translation>粗调</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="314"/>
        <source>Tuning Program</source>
        <translation>调音程序</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="315"/>
        <source>Tuning Bank</source>
        <translation>调音库</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="241"/>
        <location filename="../qtractorMidiEditor.cpp" line="353"/>
        <source>Vibrato Rate</source>
        <translation>颤音速率</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="242"/>
        <location filename="../qtractorMidiEditor.cpp" line="354"/>
        <source>Vibrato Depth</source>
        <translation>颤音深度</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="243"/>
        <location filename="../qtractorMidiEditor.cpp" line="355"/>
        <source>Vibrato Delay</source>
        <translation>颤音延迟</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="356"/>
        <source>Filter Cutoff</source>
        <translation>滤波器截止</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="236"/>
        <location filename="../qtractorMidiEditor.cpp" line="357"/>
        <source>Filter Resonance</source>
        <translation>滤波器共振</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="231"/>
        <source>Sostenuto Pedal (on/off)</source>
        <translation>持音踏板 (开/关)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="237"/>
        <source>Release Time</source>
        <translation>释音时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="238"/>
        <source>Attack Time</source>
        <translation>起音时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="239"/>
        <source>Brightness</source>
        <translation>亮度</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="240"/>
        <source>Decay Time</source>
        <translation>衰减时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="249"/>
        <source>Tremolo Level</source>
        <translation>震音电平</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="358"/>
        <source>EG Attack</source>
        <translation>EG 起音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="359"/>
        <source>EG Decay</source>
        <translation>EG 衰减</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="360"/>
        <source>EG Release</source>
        <translation>EG 释音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="363"/>
        <source>Drum Filter Cutoff</source>
        <translation>鼓滤波器截止</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="364"/>
        <source>Drum Filter Resonance</source>
        <translation>鼓滤波器共振</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="365"/>
        <source>Drum EG Attack</source>
        <translation>鼓 EG 起音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="366"/>
        <source>Drum EG Decay</source>
        <translation>鼓 EG 衰减</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="367"/>
        <source>Drum Pitch Coarse</source>
        <translation>鼓音高粗调</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="368"/>
        <source>Drum Pitch Fine</source>
        <translation>鼓音高微调</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="369"/>
        <source>Drum Level</source>
        <translation>鼓电平</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="370"/>
        <source>Drum Pan</source>
        <translation>鼓声像</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="371"/>
        <source>Drum Reverb Send</source>
        <translation>鼓混响发送</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="372"/>
        <source>Drum Chorus Send</source>
        <translation>鼓合唱发送</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="373"/>
        <source>Drum Variation Send</source>
        <translation>鼓变化发送</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="429"/>
        <source>Modulation Wheel (14bit)</source>
        <translation>调制轮 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="430"/>
        <source>Breath Controller (14bit)</source>
        <translation>呼吸控制器 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="431"/>
        <source>Foot Pedal (14bit)</source>
        <translation>脚踏板 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="432"/>
        <source>Portamento Time (14bit)</source>
        <translation>滑音时间 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="433"/>
        <source>Volume (14bit)</source>
        <translation>音量 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="434"/>
        <source>Balance (14bit)</source>
        <translation>平衡 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="435"/>
        <source>Pan Position (14bit)</source>
        <translation>声像位置 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="436"/>
        <source>Expression (14bit)</source>
        <translation>表情 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="437"/>
        <source>Effect Control 1 (14bit)</source>
        <translation>效果控制 1 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="438"/>
        <source>Effect Control 2 (14bit)</source>
        <translation>效果控制 2 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="439"/>
        <source>General Purpose Slider 1 (14bit)</source>
        <translation>通用滑块 1 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="440"/>
        <source>General Purpose Slider 2 (14bit)</source>
        <translation>通用滑块 2 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="441"/>
        <source>General Purpose Slider 3 (14bit)</source>
        <translation>通用滑块 3 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="442"/>
        <source>General Purpose Slider 4 (14bit)</source>
        <translation>通用滑块 4 (14 位)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="510"/>
        <source>Chromatic</source>
        <translation>Chromatic</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="511"/>
        <source>Major</source>
        <translation>大调</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="512"/>
        <source>Minor</source>
        <translation>小调</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="513"/>
        <source>Melodic Minor (Asc)</source>
        <translation>Melodic Minor (Asc)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="514"/>
        <source>Melodic Minor (Desc)</source>
        <translation>Melodic Minor (Desc)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="515"/>
        <source>Whole Tone</source>
        <translation>Whole Tone</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="516"/>
        <source>Pentatonic Major</source>
        <translation>Pentatonic Major</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="517"/>
        <source>Pentatonic Minor</source>
        <translation>Pentatonic Minor</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="518"/>
        <source>Pentatonic Blues</source>
        <translation>Pentatonic Blues</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="519"/>
        <source>Pentatonic Neutral</source>
        <translation>Pentatonic Neutral</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="520"/>
        <source>Octatonic (H-W)</source>
        <translation>Octatonic (H-W)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="521"/>
        <source>Octatonic (W-H)</source>
        <translation>Octatonic (W-H)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="522"/>
        <source>Ionian</source>
        <translation>Ionian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="523"/>
        <source>Dorian</source>
        <translation>Dorian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="524"/>
        <source>Phrygian</source>
        <translation>Phrygian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="525"/>
        <source>Lydian</source>
        <translation>Lydian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="526"/>
        <source>Mixolydian</source>
        <translation>Mixolydian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="527"/>
        <source>Aeolian</source>
        <translation>Aeolian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="528"/>
        <source>Locrian</source>
        <translation>Locrian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="529"/>
        <source>Egyptian</source>
        <translation>Egyptian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="530"/>
        <location filename="../qtractorMidiEditor.cpp" line="553"/>
        <source>Eight Tone Spanish</source>
        <translation>Eight Tone Spanish</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="531"/>
        <source>Hawaiian</source>
        <translation>Hawaiian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="532"/>
        <source>Hindu</source>
        <translation>Hindu</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="533"/>
        <source>Hirajoshi</source>
        <translation>Hirajoshi</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="534"/>
        <source>Hungarian Major</source>
        <translation>Hungarian Major</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="535"/>
        <source>Hungarian Minor</source>
        <translation>Hungarian Minor</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="536"/>
        <source>Hungarian Gypsy</source>
        <translation>Hungarian Gypsy</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="537"/>
        <source>Japanese (A)</source>
        <translation>Japanese (A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="538"/>
        <source>Japanese (B)</source>
        <translation>Japanese (B)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="539"/>
        <source>Jewish (Adonai Malakh)</source>
        <translation>Jewish (Adonai Malakh)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="540"/>
        <source>Jewish (Ahaba Rabba)</source>
        <translation>Jewish (Ahaba Rabba)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="541"/>
        <source>Jewish (Magen Abot)</source>
        <translation>Jewish (Magen Abot)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="542"/>
        <source>Oriental (A)</source>
        <translation>Oriental (A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="543"/>
        <source>Oriental (B)</source>
        <translation>Oriental (B)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="544"/>
        <source>Oriental (C)</source>
        <translation>Oriental (C)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="545"/>
        <source>Roumanian Minor</source>
        <translation>Roumanian Minor</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="546"/>
        <source>Neapolitan</source>
        <translation>Neapolitan</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="547"/>
        <source>Neapolitan Major</source>
        <translation>Neapolitan Major</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="548"/>
        <source>Neapolitan Minor</source>
        <translation>Neapolitan Minor</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="550"/>
        <source>Overtone</source>
        <translation>Overtone</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="554"/>
        <source>Leading Whole Tone</source>
        <translation>Leading Whole Tone</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="555"/>
        <source>Nine Tone Scale</source>
        <translation>Nine Tone Scale</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="556"/>
        <source>Dominant Seventh</source>
        <translation>Dominant Seventh</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="557"/>
        <source>Augmented</source>
        <translation>Augmented</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="558"/>
        <source>Algerian</source>
        <translation>Algerian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="559"/>
        <source>Arabian (A)</source>
        <translation>Arabian (A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="560"/>
        <source>Arabian (B)</source>
        <translation>Arabian (B)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="562"/>
        <source>Balinese</source>
        <translation>Balinese</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="567"/>
        <source>Chinese</source>
        <translation>Chinese</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="569"/>
        <source>Diminished</source>
        <translation>Diminished</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="575"/>
        <source>Japanese (Ichikosucho)</source>
        <translation>Japanese (Ichikosucho)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="576"/>
        <source>Japanese (Taishikicho)</source>
        <translation>Japanese (Taishikicho)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="577"/>
        <source>Javaneese</source>
        <translation>Javaneese</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="582"/>
        <source>Marva Theta</source>
        <translation>Marva Theta</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="584"/>
        <source>Mela Bhavapriya</source>
        <translation>Mela Bhavapriya</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="585"/>
        <source>Mela Chakravakam</source>
        <translation>Mela Chakravakam</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="586"/>
        <source>Mela Chalanata</source>
        <translation>Mela Chalanata</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="588"/>
        <source>Mela Chitrambari</source>
        <translation>Mela Chitrambari</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="589"/>
        <source>Mela Dharmavati</source>
        <translation>Mela Dharmavati</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="590"/>
        <source>Mela Dhatuvardhani</source>
        <translation>Mela Dhatuvardhani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="591"/>
        <source>Mela Dhavalambari</source>
        <translation>Mela Dhavalambari</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="594"/>
        <source>Mela Divyamani</source>
        <translation>Mela Divyamani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="596"/>
        <source>Mela Ganamurti</source>
        <translation>Mela Ganamurti</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="597"/>
        <source>Mela Gangeyabhusani</source>
        <translation>Mela Gangeyabhusani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="599"/>
        <source>Mela Gavambodhi</source>
        <translation>Mela Gavambodhi</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="600"/>
        <source>Mela Gayakapriya</source>
        <translation>Mela Gayakapriya</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="603"/>
        <source>Mela Hatakambari</source>
        <translation>Mela Hatakambari</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="605"/>
        <source>Mela Jalarnavam</source>
        <translation>Mela Jalarnavam</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="606"/>
        <source>Mela Jhalavarali</source>
        <translation>Mela Jhalavarali</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="607"/>
        <source>Mela Jhankaradhvani</source>
        <translation>Mela Jhankaradhvani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="608"/>
        <source>Mela Jyotisvarupini</source>
        <translation>Mela Jyotisvarupini</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="609"/>
        <source>Mela Kamavarardhani</source>
        <translation>Mela Kamavarardhani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="611"/>
        <source>Mela Kantamani</source>
        <translation>Mela Kantamani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="615"/>
        <source>Mela Kosalam</source>
        <translation>Mela Kosalam</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="616"/>
        <source>Mela Latangi</source>
        <translation>Mela Latangi</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="617"/>
        <source>Mela Manavati</source>
        <translation>Mela Manavati</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="618"/>
        <source>Mela Mararanjani</source>
        <translation>Mela Mararanjani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="621"/>
        <source>Mela Naganandini</source>
        <translation>Mela Naganandini</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="622"/>
        <source>Mela Namanarayani</source>
        <translation>Mela Namanarayani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="626"/>
        <source>Mela Navanitam</source>
        <translation>Mela Navanitam</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="627"/>
        <source>Mela Nitimati</source>
        <translation>Mela Nitimati</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="628"/>
        <source>Mela Pavani</source>
        <translation>Mela Pavani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="629"/>
        <source>Mela Ragavardhani</source>
        <translation>Mela Ragavardhani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="630"/>
        <source>Mela Raghupriya</source>
        <translation>Mela Raghupriya</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="631"/>
        <source>Mela Ramapriya</source>
        <translation>Mela Ramapriya</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="632"/>
        <source>Mela Rasikapriya</source>
        <translation>Mela Rasikapriya</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="633"/>
        <source>Mela Ratnangi</source>
        <translation>Mela Ratnangi</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="634"/>
        <source>Mela Risabhapriya</source>
        <translation>Mela Risabhapriya</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="635"/>
        <source>Mela Rupavati</source>
        <translation>Mela Rupavati</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="636"/>
        <source>Mela Sadvidhamargini</source>
        <translation>Mela Sadvidhamargini</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="637"/>
        <source>Mela Salagam</source>
        <translation>Mela Salagam</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="638"/>
        <source>Mela Sanmukhapriya</source>
        <translation>Mela Sanmukhapriya</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="639"/>
        <source>Mela Sarasangi</source>
        <translation>Mela Sarasangi</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="640"/>
        <source>Mela Senavati</source>
        <translation>Mela Senavati</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="642"/>
        <source>Mela Subhapantuvarali</source>
        <translation>Mela Subhapantuvarali</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="643"/>
        <source>Mela Sucharitra</source>
        <translation>Mela Sucharitra</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="644"/>
        <source>Mela Sulini</source>
        <translation>Mela Sulini</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="645"/>
        <source>Mela Suryakantam</source>
        <translation>Mela Suryakantam</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="647"/>
        <source>Mela Syamalangi</source>
        <translation>Mela Syamalangi</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="648"/>
        <source>Mela Tanarupi</source>
        <translation>Mela Tanarupi</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="650"/>
        <source>Mela Vagadhisvari</source>
        <translation>Mela Vagadhisvari</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="652"/>
        <source>Mela Vanaspati</source>
        <translation>Mela Vanaspati</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="653"/>
        <source>Mela Varunapriya</source>
        <translation>Mela Varunapriya</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="655"/>
        <source>Mela Yagapriya</source>
        <translation>Mela Yagapriya</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="658"/>
        <source>Persian</source>
        <translation>Persian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="659"/>
        <source>Purvi Theta</source>
        <translation>Purvi Theta</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="660"/>
        <source>Spanish Gypsy</source>
        <translation>Spanish Gypsy</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="661"/>
        <source>Todi Theta</source>
        <translation>Todi Theta</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="665"/>
        <source>Enigmatic</source>
        <translation>Enigmatic</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="666"/>
        <source>Kumoi</source>
        <translation>Kumoi</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="667"/>
        <source>Lydian Augmented</source>
        <translation>Lydian Augmented</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="668"/>
        <source>Pelog</source>
        <translation>Pelog</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="669"/>
        <source>Prometheus</source>
        <translation>Prometheus</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="670"/>
        <source>Prometheus Neapolitan</source>
        <translation>Prometheus Neapolitan</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="671"/>
        <source>Six Tone Symmetrical</source>
        <translation>Six Tone Symmetrical</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="672"/>
        <source>Super Locrian</source>
        <translation>Super Locrian</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="673"/>
        <source>Lydian Minor</source>
        <translation>Lydian Minor</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="674"/>
        <source>Lydian Diminished</source>
        <translation>Lydian Diminished</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="678"/>
        <source>Half Diminished</source>
        <translation>Half Diminished</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="679"/>
        <source>Bhairav</source>
        <translation>Bhairav</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="680"/>
        <source>Yaman</source>
        <translation>Yaman</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="681"/>
        <source>Todi</source>
        <translation>Todi</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="682"/>
        <source>Jog</source>
        <translation>Jog</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="683"/>
        <source>Multani</source>
        <translation>Multani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="684"/>
        <source>Darbari</source>
        <translation>Darbari</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="685"/>
        <source>Malkauns</source>
        <translation>Malkauns</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="686"/>
        <source>Bhoopali</source>
        <translation>Bhoopali</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="687"/>
        <source>Shivaranjani</source>
        <translation>Shivaranjani</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="688"/>
        <source>Marwa</source>
        <translation>Marwa</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="690"/>
        <source>Minor 5</source>
        <translation>Minor 5</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="691"/>
        <source>Major 5</source>
        <translation>Major 5</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="692"/>
        <source>5</source>
        <translation>5</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="693"/>
        <source>45</source>
        <translation>45</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="694"/>
        <source>457</source>
        <translation>457</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="695"/>
        <source>M 6</source>
        <translation>M 6</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="900"/>
        <source>MIDI Editor</source>
        <translation>MIDI 编辑器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="1919"/>
        <source>cut</source>
        <translation>剪切</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="2139"/>
        <source>delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="2448"/>
        <source>insert range</source>
        <translation>插入范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="2524"/>
        <source>remove range</source>
        <translation>移除范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="4425"/>
        <source>move</source>
        <translation>移动</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="4484"/>
        <source>edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="4484"/>
        <location filename="../qtractorMidiEditor.cpp" line="4714"/>
        <source>resize</source>
        <translation>调整</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="4564"/>
        <source>rescale</source>
        <translation>缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="4653"/>
        <source>paste</source>
        <translation>粘贴</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5436"/>
        <source>Time:	%1
Type:	</source>
        <translation>时间：	%1
类型：	</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5445"/>
        <source>Note On (%1) %2
Velocity:	%3
Duration: %4</source>
        <translation>音符开 (%1) %2
力度：	%3
时长：%4</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5452"/>
        <source>Key Press (%1) %2
Value:	%3</source>
        <translation>键触后 (%1) %2
值：	%3</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5458"/>
        <source>Controller (%1)
Name:	%2
Value:	%3</source>
        <translation>控制器 (%1)
名称：	%2
值：	%3</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5464"/>
        <source>RPN (%1)
Name:	%2
Value:	%3</source>
        <translation>RPN (%1)
名称：	%2
值：	%3</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5470"/>
        <source>NRPN (%1)
Name:	%2
Value:	%3</source>
        <translation>NRPN (%1)
名称：	%2
值：	%3</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5476"/>
        <source>Control 14 (%1)
Name:	%2
Value:	%3</source>
        <translation>14 位控制 (%1)
名称：	%2
值：	%3</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5482"/>
        <source>Pgm Change (%1)</source>
        <translation>音色改变 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5486"/>
        <source>Chan Press (%1)</source>
        <translation>通道触后 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5490"/>
        <source>Pitch Bend (%1)</source>
        <translation>弯音 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5497"/>
        <source>SysEx (%1 bytes)
Data: </source>
        <translation>系统专用信息 (%1 字节)
数据：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5513"/>
        <source>Unknown (%1)</source>
        <translation>未知 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditor.cpp" line="5781"/>
        <source>Start:	%1
End:	%2
Length:	%3</source>
        <translation>开始：	%1
结束：	%2
长度：	%3</translation>
    </message>
</context>
<context>
    <name>qtractorMidiEditorForm</name>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="34"/>
        <location filename="../qtractorMidiEditorForm.cpp" line="2443"/>
        <source>MIDI Editor</source>
        <translation>MIDI 编辑器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="54"/>
        <source>&amp;Track</source>
        <translation>轨道(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="50"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1098"/>
        <source>&amp;File</source>
        <translation>文件(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="195"/>
        <source>Select &amp;Mode</source>
        <translation>选择模式(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="204"/>
        <source>&amp;Select</source>
        <translation>选择(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="214"/>
        <source>I&amp;nsert</source>
        <translation>插入(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="221"/>
        <source>Remo&amp;ve</source>
        <translation>移除(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="178"/>
        <source>&amp;Tools</source>
        <translation>工具(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="191"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1115"/>
        <source>&amp;Edit</source>
        <translation>编辑(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="86"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1132"/>
        <source>&amp;View</source>
        <translation>视图(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="58"/>
        <source>Instrum&amp;ent</source>
        <translation>乐器(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="90"/>
        <source>&amp;Toolbars</source>
        <translation>工具栏(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="104"/>
        <source>&amp;Windows</source>
        <translation>窗口(&amp;W)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="110"/>
        <source>Not&amp;e Type</source>
        <translation>音符类型(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="115"/>
        <source>Val&amp;ue Type</source>
        <translation>值类型(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="120"/>
        <source>&amp;Ghost Track</source>
        <translation>幽灵轨道(&amp;G)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="125"/>
        <source>&amp;Zoom</source>
        <translation>缩放(&amp;Z)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="141"/>
        <source>S&amp;nap</source>
        <translation>吸附(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="146"/>
        <source>Sc&amp;ale</source>
        <translation>音阶(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="245"/>
        <source>T&amp;ransport</source>
        <translation>走带(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="249"/>
        <source>&amp;Note</source>
        <translation>音符(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="256"/>
        <source>St&amp;ep</source>
        <translation>步进(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="284"/>
        <source>&amp;Help</source>
        <translation>帮助(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="435"/>
        <source>&amp;Save</source>
        <translation>保存(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="438"/>
        <location filename="../qtractorMidiEditorForm.ui" line="441"/>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="444"/>
        <source>Save current MIDI clip to existing file name</source>
        <translation>将当前 MIDI 剪辑保存到已有文件名</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="449"/>
        <source>Save &amp;As...</source>
        <translation>另存为(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="452"/>
        <source>Save As</source>
        <translation>另存为</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="455"/>
        <source>Save as</source>
        <translation>另存为</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="458"/>
        <source>Save current MIDI clip with another file name</source>
        <translation>用另一个文件名保存当前 MIDI 剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="466"/>
        <source>&amp;Mute</source>
        <translation>静音(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="469"/>
        <location filename="../qtractorMidiEditorForm.ui" line="472"/>
        <source>Mute</source>
        <translation>静音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="475"/>
        <source>Mute current MIDI clip</source>
        <translation>将当前 MIDI 剪辑静音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="480"/>
        <source>&amp;Unlink</source>
        <translation>取消链接(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="483"/>
        <location filename="../qtractorMidiEditorForm.ui" line="486"/>
        <source>Unlink</source>
        <translation>取消链接</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="489"/>
        <source>Unlink current MIDI clip</source>
        <translation>取消链接当前 MIDI 剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="500"/>
        <source>Recor&amp;d</source>
        <translation>录制(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="509"/>
        <source>Record current MIDI clip (overdub)</source>
        <translation>录制当前 MIDI 剪辑 (叠加)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="514"/>
        <source>&amp;Inputs</source>
        <translation>输入(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="517"/>
        <source>Track Inputs</source>
        <translation>轨道输入</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="520"/>
        <source>Track inputs</source>
        <translation>轨道输入</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="523"/>
        <source>Show current MIDI clip/track input bus connections</source>
        <translation>显示当前 MIDI 剪辑/轨道输入总线连接</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="528"/>
        <source>&amp;Outputs</source>
        <translation>输出(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="531"/>
        <source>Track Outputs</source>
        <translation>轨道输出</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="534"/>
        <source>Track outputs</source>
        <translation>轨道输出</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="537"/>
        <source>Show current MIDI clip/track output bus connections</source>
        <translation>显示当前 MIDI 剪辑/轨道输出总线连接</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="545"/>
        <location filename="../qtractorMidiEditorForm.ui" line="565"/>
        <source>&amp;Properties...</source>
        <translation>属性(&amp;P)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="548"/>
        <source>Track Properties</source>
        <translation>轨道属性</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="551"/>
        <source>Track properties</source>
        <translation>轨道属性</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="554"/>
        <source>Edit current MIDI clip/track properties</source>
        <translation>编辑当前 MIDI 剪辑/轨道属性</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="557"/>
        <source>Shift+F2</source>
        <translation>Shift+F2</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="568"/>
        <location filename="../qtractorMidiEditorForm.ui" line="571"/>
        <source>Properties</source>
        <translation>属性</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="574"/>
        <source>Edit current MIDI clip properties</source>
        <translation>编辑当前 MIDI 剪辑属性</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="577"/>
        <source>F4</source>
        <translation>F4</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="582"/>
        <source>&amp;Range Set</source>
        <translation>设置范围(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="585"/>
        <source>Clip Range</source>
        <translation>剪辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="588"/>
        <source>Clip range</source>
        <translation>剪辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="591"/>
        <source>Set edit-range from clip extents</source>
        <translation>从剪辑边界设置编辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="599"/>
        <source>&amp;Loop Set</source>
        <translation>设置循环(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="602"/>
        <source>Clip Loop</source>
        <translation>剪辑循环</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="605"/>
        <source>Clip loop</source>
        <translation>剪辑循环</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="608"/>
        <source>Set loop-range from clip extents</source>
        <translation>从剪辑边界设置循环范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="613"/>
        <source>&amp;Close</source>
        <translation>关闭(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="616"/>
        <location filename="../qtractorMidiEditorForm.ui" line="619"/>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="622"/>
        <source>Close this MIDI clip editor</source>
        <translation>关闭此 MIDI 剪辑编辑器</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="630"/>
        <source>&amp;Undo</source>
        <translation>撤销(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="633"/>
        <location filename="../qtractorMidiEditorForm.ui" line="636"/>
        <source>Undo</source>
        <translation>撤销</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="639"/>
        <source>Undo last edit operation</source>
        <translation>撤销上次编辑操作</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="642"/>
        <source>Ctrl+Z</source>
        <translation>Ctrl+Z</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="650"/>
        <source>&amp;Redo</source>
        <translation>重做(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="653"/>
        <location filename="../qtractorMidiEditorForm.ui" line="656"/>
        <source>Redo</source>
        <translation>重做</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="659"/>
        <source>Redo last edit operation</source>
        <translation>重做上次编辑操作</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="662"/>
        <source>Ctrl+Shift+Z</source>
        <translation>Ctrl+Shift+Z</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="670"/>
        <source>Cu&amp;t</source>
        <translation>剪切(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="673"/>
        <location filename="../qtractorMidiEditorForm.ui" line="676"/>
        <source>Cut</source>
        <translation>剪切</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="679"/>
        <source>Cut current selection into the local clipboard</source>
        <translation>将当前选择剪切到本地剪贴板</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="682"/>
        <source>Ctrl+X</source>
        <translation>Ctrl+X</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="690"/>
        <source>&amp;Copy</source>
        <translation>复制(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="693"/>
        <location filename="../qtractorMidiEditorForm.ui" line="696"/>
        <source>Copy</source>
        <translation>复制</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="699"/>
        <source>Copy current selection to the local clipboard</source>
        <translation>将当前选择复制到本地剪贴板</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="702"/>
        <source>Ctrl+C</source>
        <translation>Ctrl+C</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="710"/>
        <source>&amp;Paste</source>
        <translation>粘贴(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="713"/>
        <location filename="../qtractorMidiEditorForm.ui" line="716"/>
        <source>Paste</source>
        <translation>粘贴</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="719"/>
        <source>Paste local clipboard contents into the current MIDI clip</source>
        <translation>将本地剪贴板内容粘贴到当前 MIDI 剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="722"/>
        <source>Ctrl+V</source>
        <translation>Ctrl+V</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="727"/>
        <source>Past&amp;e Repeat...</source>
        <translation>重复粘贴(&amp;E)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="730"/>
        <source>Paste Repeat</source>
        <translation>重复粘贴</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="733"/>
        <source>Paste repeat</source>
        <translation>重复粘贴</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="736"/>
        <source>Paste/repeat local clipboard contents into the current MIDI clip</source>
        <translation>将本地剪贴板内容粘贴/重复到当前 MIDI 剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="739"/>
        <source>Ctrl+Shift+V</source>
        <translation>Ctrl+Shift+V</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="747"/>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="750"/>
        <location filename="../qtractorMidiEditorForm.ui" line="753"/>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="756"/>
        <source>Delete current selection</source>
        <translation>删除当前选择</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="759"/>
        <source>Del</source>
        <translation>Del</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="770"/>
        <source>Edit Of&amp;f</source>
        <translation>编辑关闭(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="773"/>
        <source>Edit Off</source>
        <translation>编辑关闭</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="776"/>
        <source>Edit off</source>
        <translation>编辑关闭</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="779"/>
        <source>Set edit mode off</source>
        <translation>关闭编辑模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="790"/>
        <source>Edit &amp;On</source>
        <translation>编辑开启(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="793"/>
        <source>Edit On</source>
        <translation>编辑开启</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="796"/>
        <source>Edit on</source>
        <translation>编辑开启</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="799"/>
        <source>Set edit mode on</source>
        <translation>开启编辑模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="810"/>
        <source>Edit &amp;Draw</source>
        <translation>编辑绘制(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="813"/>
        <source>Edit draw mode</source>
        <translation>编辑绘制模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="816"/>
        <source>Edit draw mode (notes)</source>
        <translation>编辑绘制模式 (音符)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="824"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1448"/>
        <source>&amp;All</source>
        <translation>全部(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="827"/>
        <source>Select All</source>
        <translation>全选</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="830"/>
        <location filename="../qtractorMidiEditorForm.ui" line="833"/>
        <source>Select all</source>
        <translation>全选</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="836"/>
        <source>Ctrl+A</source>
        <translation>Ctrl+A</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="841"/>
        <location filename="../qtractorMidiEditorForm.cpp" line="2690"/>
        <source>&amp;None</source>
        <translation>无(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="844"/>
        <source>Select None</source>
        <translation>取消全选</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="847"/>
        <location filename="../qtractorMidiEditorForm.ui" line="850"/>
        <source>Select none</source>
        <translation>取消全选</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="853"/>
        <source>Ctrl+Shift+A</source>
        <translation>Ctrl+Shift+A</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="858"/>
        <source>&amp;Invert</source>
        <translation>反转(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="861"/>
        <source>Select Invert</source>
        <translation>反选</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="864"/>
        <location filename="../qtractorMidiEditorForm.ui" line="867"/>
        <source>Select invert</source>
        <translation>反选</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="870"/>
        <source>Ctrl+I</source>
        <translation>Ctrl+I</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="875"/>
        <location filename="../qtractorMidiEditorForm.ui" line="892"/>
        <location filename="../qtractorMidiEditorForm.ui" line="926"/>
        <source>&amp;Range</source>
        <translation>范围(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="878"/>
        <source>Select Range</source>
        <translation>选择范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="881"/>
        <source>Select range</source>
        <translation>选择范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="884"/>
        <source>Mark range as selected</source>
        <translation>标记范围为已选</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="887"/>
        <source>Ctrl+R</source>
        <translation>Ctrl+R</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="895"/>
        <source>Insert Range</source>
        <translation>插入范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="898"/>
        <source>Insert range</source>
        <translation>插入范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="901"/>
        <source>Insert range as selected</source>
        <translation>插入选中范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="904"/>
        <source>Ctrl+Ins</source>
        <translation>Ctrl+Ins</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="909"/>
        <source>&amp;Step</source>
        <translation>步进(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="912"/>
        <source>Insert step</source>
        <translation>插入步进</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="915"/>
        <location filename="../qtractorMidiEditorForm.ui" line="918"/>
        <source>Insert step (rest)</source>
        <translation>插入步进 (休止)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="921"/>
        <source>Right</source>
        <translatorcomment>DO NOT TRANSLATE</translatorcomment>
        <translation>右</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="929"/>
        <source>Remove Range</source>
        <translation>移除范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="932"/>
        <source>Remove range</source>
        <translation>移除范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="935"/>
        <source>Remove range as selected</source>
        <translation>移除选中范围</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="938"/>
        <source>Ctrl+Del</source>
        <translation>Ctrl+Del</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="943"/>
        <source>&amp;Quantize...</source>
        <translation>量化(&amp;Q)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="946"/>
        <location filename="../qtractorMidiEditorForm.ui" line="949"/>
        <source>Quantize</source>
        <translation>量化</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="952"/>
        <source>Quantize selection</source>
        <translation>量化选择</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="957"/>
        <source>&amp;Transpose...</source>
        <translation>移调(&amp;T)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="960"/>
        <location filename="../qtractorMidiEditorForm.ui" line="963"/>
        <source>Transpose</source>
        <translation>移调</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="966"/>
        <source>Transpose selection</source>
        <translation>移调选择</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="971"/>
        <source>&amp;Normalize...</source>
        <translation>标准化(&amp;N)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="974"/>
        <location filename="../qtractorMidiEditorForm.ui" line="977"/>
        <source>Normalize</source>
        <translation>标准化</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="980"/>
        <source>Normalize selection</source>
        <translation>标准化选择</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="985"/>
        <source>&amp;Randomize...</source>
        <translation>随机化(&amp;R)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="988"/>
        <location filename="../qtractorMidiEditorForm.ui" line="991"/>
        <source>Randomize</source>
        <translation>随机化</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="994"/>
        <source>Randomize selection</source>
        <translation>随机化选择</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="999"/>
        <source>Resi&amp;ze...</source>
        <translation>调整(&amp;Z)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1002"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1005"/>
        <source>Resize</source>
        <translation>调整</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1008"/>
        <source>Resize selection</source>
        <translation>调整选择</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1013"/>
        <source>Re&amp;scale...</source>
        <translation>缩放(&amp;S)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1016"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1019"/>
        <source>Rescale</source>
        <translation>缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1022"/>
        <source>Rescale selection</source>
        <translation>缩放选择</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1027"/>
        <source>T&amp;imeshift...</source>
        <translation>时间偏移(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1030"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1033"/>
        <source>Timeshift</source>
        <translation>时间偏移</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1036"/>
        <source>Timeshift selection</source>
        <translation>时间偏移选择</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1041"/>
        <source>T&amp;empo ramp...</source>
        <translation>速度渐变(&amp;E)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1044"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1047"/>
        <source>Tempo ramp</source>
        <translation>速度渐变</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1050"/>
        <source>Tempo ramp selection</source>
        <translation>速度渐变选择</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1058"/>
        <source>&amp;Menubar</source>
        <translation>菜单栏(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1061"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1064"/>
        <source>Menubar</source>
        <translation>菜单栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1067"/>
        <source>Show/hide the menubar</source>
        <translation>显示/隐藏菜单栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1070"/>
        <source>Ctrl+M</source>
        <translation>Ctrl+M</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1078"/>
        <source>&amp;Statusbar</source>
        <translation>状态栏(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1081"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1084"/>
        <source>Statusbar</source>
        <translation>状态栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1087"/>
        <source>Show/hide the statusbar</source>
        <translation>显示/隐藏状态栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1101"/>
        <source>File Toolbar</source>
        <translation>文件工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1104"/>
        <source>File toolbar</source>
        <translation>文件工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1107"/>
        <source>Show/hide the file toolbar</source>
        <translation>显示/隐藏文件工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1118"/>
        <source>Edit Toolbar</source>
        <translation>编辑工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1121"/>
        <source>Edit toolbar</source>
        <translation>编辑工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1124"/>
        <source>Show/hide the edit toolbar</source>
        <translation>显示/隐藏编辑工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1135"/>
        <source>View Toolbar</source>
        <translation>视图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1138"/>
        <source>View toolbar</source>
        <translation>视图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1141"/>
        <source>Show/hide the view toolbar</source>
        <translation>显示/隐藏视图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1149"/>
        <source>&amp;Transport</source>
        <translation>走带(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1152"/>
        <source>Transport Toolbar</source>
        <translation>走带工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1155"/>
        <source>Transport toolbar</source>
        <translation>走带工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1158"/>
        <source>Show/hide the transport toolbar</source>
        <translation>显示/隐藏走带工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1166"/>
        <source>T&amp;ime</source>
        <translation>时间(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1169"/>
        <source>Time Toolbar</source>
        <translation>时间工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1172"/>
        <source>Time toolbar</source>
        <translation>时间工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1175"/>
        <source>Show/hide the time toolbar</source>
        <translation>显示/隐藏时间工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1183"/>
        <source>&amp;Scale</source>
        <translation>音阶(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1186"/>
        <source>Scale Toolbar</source>
        <translation>音阶工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1189"/>
        <source>Scale toolbar</source>
        <translation>音阶工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1192"/>
        <source>Show/hide the scale toolbar</source>
        <translation>显示/隐藏音阶工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1200"/>
        <source>Thum&amp;b</source>
        <translation>缩略图(&amp;B)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1203"/>
        <source>Thumb Toolbar</source>
        <translation>缩略图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1206"/>
        <source>Thumb toolbar</source>
        <translation>缩略图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1209"/>
        <source>Show/hide the thumb view toolbar</source>
        <translation>显示/隐藏缩略视图工具栏</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1217"/>
        <source>Loc&amp;k Toolbars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1220"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1223"/>
        <source>Lock Toolbar Positions</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1226"/>
        <source>Lock/unlock midi window toolbar positions</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1254"/>
        <source>Note &amp;Names</source>
        <translation>音符名称(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1257"/>
        <source>Note Names</source>
        <translation>音符名称</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1260"/>
        <source>Note names</source>
        <translation>音符名称</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1263"/>
        <source>Whether to show note names</source>
        <translation>是否显示音符名称</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1274"/>
        <source>Note &amp;Duration</source>
        <translation>音符时长(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1277"/>
        <source>Note Duration</source>
        <translation>音符时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1280"/>
        <source>Note duration</source>
        <translation>音符时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1283"/>
        <source>Whether note events are shown proportional to duration</source>
        <translation>是否按比例显示音符事件时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1294"/>
        <source>Note &amp;Color</source>
        <translation>音符颜色(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1297"/>
        <source>Note Color</source>
        <translation>音符颜色</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1300"/>
        <source>Note color</source>
        <translation>音符颜色</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1303"/>
        <source>Whether note events are colored according to pitch</source>
        <translation>是否按音高给音符事件着色</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1337"/>
        <source>&amp;Value Color</source>
        <translation>值颜色(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1340"/>
        <source>Value Color</source>
        <translation>值颜色</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1343"/>
        <source>Value color</source>
        <translation>值颜色</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1346"/>
        <source>Whether note events are colored according to value (velocity)</source>
        <translation>是否按力度给音符事件着色</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1317"/>
        <source>&amp;Drum Mode</source>
        <translation>鼓模式(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1320"/>
        <source>Drum Mode</source>
        <translation>鼓模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1323"/>
        <source>Drum mode</source>
        <translation>鼓模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1326"/>
        <source>Whether note onset events are displayed as diamonds</source>
        <translation>是否将音符起始事件显示为菱形</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1237"/>
        <source>&amp;Events</source>
        <translation>事件(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1240"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1243"/>
        <source>View events</source>
        <translation>查看事件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1246"/>
        <source>Show/hide the events list</source>
        <translation>显示/隐藏事件列表</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1536"/>
        <source>&amp;Preview Notes</source>
        <translation>预览音符(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1539"/>
        <source>Preview Notes</source>
        <translation>预览音符</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1542"/>
        <source>Preview notes</source>
        <translation>预览音符</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1545"/>
        <source>Preview notes while editing (scrub)</source>
        <translation>编辑时预览音符 (擦除)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1559"/>
        <source>F&amp;ollow Playhead</source>
        <translation>跟随播放头(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1562"/>
        <source>Follow Playhead</source>
        <translation>跟随播放头</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1565"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1568"/>
        <source>Follow playhead</source>
        <translation>跟随播放头</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1357"/>
        <source>&amp;In</source>
        <translation>放大(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1360"/>
        <source>Zoom In</source>
        <translation>放大</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1363"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1366"/>
        <source>Zoom in</source>
        <translation>放大</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1369"/>
        <source>Ctrl++</source>
        <translation>Ctrl++</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1377"/>
        <source>&amp;Out</source>
        <translation>缩小(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1380"/>
        <source>Zoom Out</source>
        <translation>缩小</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1383"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1386"/>
        <source>Zoom out</source>
        <translation>缩小</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1389"/>
        <source>Ctrl+-</source>
        <translation>Ctrl+-</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1394"/>
        <source>&amp;Reset</source>
        <translation>重置(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1397"/>
        <source>Zoom Reset</source>
        <translation>重置缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1400"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1403"/>
        <source>Zoom reset</source>
        <translation>重置缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1406"/>
        <source>Ctrl+1</source>
        <translation>Ctrl+1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1414"/>
        <source>&amp;Horizontal</source>
        <translation>水平(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1417"/>
        <source>Horizontal Zoom</source>
        <translation>水平缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1420"/>
        <source>Horizontal zoom</source>
        <translation>水平缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1423"/>
        <source>Horizontal zoom mode</source>
        <translation>水平缩放模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1431"/>
        <source>&amp;Vertical</source>
        <translation>垂直(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1434"/>
        <source>Vertical Zoom</source>
        <translation>垂直缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1437"/>
        <source>Vertical zoom</source>
        <translation>垂直缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1440"/>
        <source>Vertical zoom mode</source>
        <translation>垂直缩放模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1451"/>
        <source>All Zoom</source>
        <translation>全部缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1454"/>
        <source>All zoom</source>
        <translation>全部缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1457"/>
        <source>All zoom mode</source>
        <translation>全部缩放模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1465"/>
        <source>&amp;Zebra</source>
        <translation>斑马线(&amp;Z)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1468"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1471"/>
        <source>Zebra</source>
        <translation>斑马线</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1474"/>
        <source>Bar zebra view mode</source>
        <translation>小节斑马线视图模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1482"/>
        <source>&amp;Grid</source>
        <translation>网格(&amp;G)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1485"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1488"/>
        <source>Grid</source>
        <translation>网格</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1491"/>
        <source>Snap grid view mode</source>
        <translation>网格吸附视图模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1499"/>
        <source>Too&amp;l Tips</source>
        <translation>工具提示(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1502"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1505"/>
        <source>Tool tips</source>
        <translation>工具提示</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1508"/>
        <source>Floating tool tips view mode</source>
        <translation>浮动工具提示视图模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1513"/>
        <source>&amp;Refresh</source>
        <translation>刷新(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1516"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1519"/>
        <source>Refresh</source>
        <translation>刷新</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1522"/>
        <source>Refresh views</source>
        <translation>刷新视图</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1525"/>
        <source>F5</source>
        <translation>F5</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1579"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1662"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1690"/>
        <source>&amp;Backward</source>
        <translation>后退(&amp;B)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1582"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1585"/>
        <source>Backward</source>
        <translation>后退</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1588"/>
        <source>Transport backward</source>
        <translation>走带后退</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1591"/>
        <source>Backspace</source>
        <translation>Backspace</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1602"/>
        <source>Re&amp;wind</source>
        <translation>快退(&amp;W)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1605"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1608"/>
        <source>Rewind</source>
        <translation>快退</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1611"/>
        <source>Transport rewind</source>
        <translation>走带快退</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1625"/>
        <source>F&amp;ast Forward</source>
        <translation>快进(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1628"/>
        <source>Fast Forward</source>
        <translation>快进</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1631"/>
        <source>Fast forward</source>
        <translation>快进</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1634"/>
        <source>Transport fast forward</source>
        <translation>走带快进</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1645"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1676"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1704"/>
        <source>&amp;Forward</source>
        <translation>前进(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1648"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1651"/>
        <source>Forward</source>
        <translation>前进</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1654"/>
        <source>Transport forward</source>
        <translation>走带前进</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1665"/>
        <source>Step Backward</source>
        <translation>步退</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1668"/>
        <source>Step backward</source>
        <translation>步退</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1671"/>
        <source>Transport step backward</source>
        <translation>走带步退</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1679"/>
        <source>Step Forward</source>
        <translation>步进</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1682"/>
        <source>Step forward</source>
        <translation>步进</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1685"/>
        <source>Transport step forward</source>
        <translation>走带步进</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1693"/>
        <source>Note Backward</source>
        <translation>后退音符</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1696"/>
        <source>Step note backward</source>
        <translation>步退音符</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1699"/>
        <source>Transport step note backward</source>
        <translation>走带步退音符</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1707"/>
        <source>Note Forward</source>
        <translation>前进音符</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1710"/>
        <source>Step note forward</source>
        <translation>步进音符</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1713"/>
        <source>Transport step note forward</source>
        <translation>走带步进音符</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1724"/>
        <source>&amp;Loop</source>
        <translation>循环(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1727"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1730"/>
        <source>Loop</source>
        <translation>循环</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1733"/>
        <source>Transport loop</source>
        <translation>走带循环</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1736"/>
        <source>Ctrl+Shift+L</source>
        <translation>Ctrl+Shift+L</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1741"/>
        <source>Loop &amp;Set</source>
        <translation>设置循环(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1744"/>
        <source>Loop Set</source>
        <translation>设置循环</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1747"/>
        <source>Loop set</source>
        <translation>设置循环</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1750"/>
        <source>Transport loop set</source>
        <translation>走带循环设置</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1753"/>
        <source>Ctrl+L</source>
        <translation>Ctrl+L</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1761"/>
        <source>&amp;Stop</source>
        <translation>停止(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1764"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1767"/>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1770"/>
        <source>Transport stop</source>
        <translation>走带停止</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1781"/>
        <source>&amp;Play</source>
        <translation>播放(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1784"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1787"/>
        <source>Play</source>
        <translation>播放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1790"/>
        <source>Transport play/pause</source>
        <translation>走带播放/暂停</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1793"/>
        <source>Space</source>
        <translation>Space</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1804"/>
        <source>&amp;Record</source>
        <translation>录制(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="503"/>
        <location filename="../qtractorMidiEditorForm.ui" line="506"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1807"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1810"/>
        <source>Record</source>
        <translation>录制</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1813"/>
        <source>Transport record</source>
        <translation>走带录制</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1827"/>
        <source>&amp;Punch</source>
        <translation>插入录音(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1830"/>
        <source>Punch</source>
        <translation>插入录音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1833"/>
        <source>Punch in/out</source>
        <translation>插入录音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1836"/>
        <source>Transport punch in/out</source>
        <translation>走带插入录音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1839"/>
        <source>Ctrl+Shift+P</source>
        <translation>Ctrl+Shift+P</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1844"/>
        <source>Punch Se&amp;t</source>
        <translation>设置插入录音(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1847"/>
        <source>Punch Set</source>
        <translation>设置插入录音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1850"/>
        <source>Punch in/out set</source>
        <translation>插入录音设置</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1853"/>
        <source>Transport punch in/out set</source>
        <translation>走带插入录音设置</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1856"/>
        <source>Ctrl+P</source>
        <translation>Ctrl+P</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1864"/>
        <source>Pa&amp;nic</source>
        <translation>紧急停止(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1867"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1870"/>
        <source>Panic</source>
        <translation>紧急停止</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1873"/>
        <source>All MIDI tracks shut off (panic)</source>
        <translation>关闭所有 MIDI 轨道 (紧急停止)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1881"/>
        <source>&amp;Shortcuts...</source>
        <translation>快捷键(&amp;S)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1884"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1887"/>
        <source>Shortcuts</source>
        <translation>快捷键</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1890"/>
        <source>Keyboard shortcuts</source>
        <translation>键盘快捷键</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1898"/>
        <source>&amp;About...</source>
        <translation>关于(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1901"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1904"/>
        <source>About</source>
        <translation>关于</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1907"/>
        <source>Show information about this application program</source>
        <translation>显示此应用程序的信息</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1915"/>
        <source>About &amp;Qt...</source>
        <translation>关于 Qt(&amp;Q)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1918"/>
        <location filename="../qtractorMidiEditorForm.ui" line="1921"/>
        <source>About Qt</source>
        <translation>关于 Qt</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.ui" line="1924"/>
        <source>Show information about the Qt toolkit</source>
        <translation>显示 Qt 工具包的信息</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="164"/>
        <source>Current time (play-head)</source>
        <translation>当前时间 (播放头)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="177"/>
        <source>Current tempo (BPM)</source>
        <translation>当前速度 (BPM)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="185"/>
        <source>Reset time-sig.</source>
        <translation>重置拍号</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="216"/>
        <source>Set current snap to %1</source>
        <translation>设置当前吸附为 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="257"/>
        <source>Note Velocity</source>
        <translation>音符力度</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="270"/>
        <source>Snap/beat</source>
        <translation>吸附/拍</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="271"/>
        <source>Note type</source>
        <translation>音符类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="272"/>
        <source>Value type</source>
        <translation>值类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="273"/>
        <source>Parameter type</source>
        <translation>参数类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="274"/>
        <source>Scale key</source>
        <translation>音阶调性</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="275"/>
        <source>Scale type</source>
        <translation>音阶类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="333"/>
        <source>MIDI clip name</source>
        <translation>MIDI 剪辑名称</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="341"/>
        <source>MIDI file name</source>
        <translation>MIDI 文件名</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="349"/>
        <source>MIDI track/channel</source>
        <translation>MIDI 轨道/通道</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="354"/>
        <location filename="../qtractorMidiEditorForm.cpp" line="2478"/>
        <source>MOD</source>
        <translation>修改</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="357"/>
        <source>MIDI modification state</source>
        <translation>MIDI 修改状态</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="362"/>
        <location filename="../qtractorMidiEditorForm.cpp" line="2483"/>
        <source>REC</source>
        <translation>录音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="365"/>
        <source>MIDI clip record state</source>
        <translation>MIDI 剪辑录音状态</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="370"/>
        <location filename="../qtractorMidiEditorForm.cpp" line="2492"/>
        <source>MUTE</source>
        <translation>静音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="373"/>
        <source>MIDI clip mute state</source>
        <translation>MIDI 剪辑静音状态</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="378"/>
        <source>00:00:00.000</source>
        <translation>00:00:00.000</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="381"/>
        <source>MIDI clip duration</source>
        <translation>MIDI 剪辑时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="938"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="939"/>
        <source>The current MIDI clip has been changed:

&quot;%1&quot;

Do you want to save the changes?</source>
        <translation>当前 MIDI 剪辑已更改：

&quot;%1&quot;

是否保存更改？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="1299"/>
        <source>Save MIDI Clip</source>
        <translation>保存 MIDI 剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="1301"/>
        <source>MIDI files (*.%1 *.smf *.midi)</source>
        <translation>MIDI 文件 (*.%1 *.smf *.midi)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="1302"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="2458"/>
        <source>Channel %1</source>
        <translation>通道 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="2461"/>
        <source>Track %1</source>
        <translation>轨道 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEditorForm.cpp" line="2468"/>
        <source>[modified]</source>
        <translation>[已修改]</translation>
    </message>
</context>
<context>
    <name>qtractorMidiEventList</name>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="983"/>
        <source>Events</source>
        <translation>事件</translation>
    </message>
</context>
<context>
    <name>qtractorMidiEventListView::ItemDelegate</name>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="734"/>
        <source>edit %1</source>
        <translation>编辑 %1</translation>
    </message>
</context>
<context>
    <name>qtractorMidiEventListView::ItemModel</name>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="149"/>
        <location filename="../qtractorMidiEventList.cpp" line="186"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="150"/>
        <source>Type</source>
        <translation>类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="151"/>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="152"/>
        <source>Value</source>
        <translation>值</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="153"/>
        <source>Duration/Data</source>
        <translation>时长/数据</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="184"/>
        <source>Frame</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="188"/>
        <source>BBT</source>
        <translation>BBT</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="402"/>
        <source>Note On (%1)</source>
        <translation>音符开 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="404"/>
        <source>Note Off (%1)</source>
        <translation>音符关 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="406"/>
        <source>Key Press (%1)</source>
        <translation>键触后 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="408"/>
        <source>Controller (%1)</source>
        <translation>控制器 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="410"/>
        <source>Control 14 (%1)</source>
        <translation>14 位控制 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="412"/>
        <source>RPN (%1)</source>
        <translation>RPN (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="414"/>
        <source>NRPN (%1)</source>
        <translation>NRPN (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="416"/>
        <source>Pgm Change</source>
        <translation>音色改变</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="418"/>
        <source>Chan Press</source>
        <translation>通道触后</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="420"/>
        <source>Pitch Bend</source>
        <translation>弯音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="422"/>
        <source>SysEx</source>
        <translation>系统专用信息</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="424"/>
        <source>Meta (%1)</source>
        <translation>元数据 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiEventList.cpp" line="428"/>
        <source>Unknown (%1)</source>
        <translation>未知 (%1)</translation>
    </message>
</context>
<context>
    <name>qtractorMidiListView</name>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="132"/>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="133"/>
        <source>Fmt</source>
        <translation>格式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="134"/>
        <source>Tracks</source>
        <translation>轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="135"/>
        <source>tpqn</source>
        <translation>tpqn</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="136"/>
        <source>Path</source>
        <translation>路径</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="167"/>
        <source>%1: MIDI file not found.</source>
        <translation>%1：未找到 MIDI 文件。</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="181"/>
        <source>Open MIDI Files</source>
        <translation>打开 MIDI 文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="184"/>
        <source>MIDI files (*.%1 *.smf *.midi)</source>
        <translation>MIDI 文件 (*.%1 *.smf *.midi)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiListView.cpp" line="185"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
</context>
<context>
    <name>qtractorMidiMixerMeter</name>
    <message>
        <location filename="../qtractorMidiMeter.cpp" line="585"/>
        <source>Volume (%)</source>
        <translation>音量 (%)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiMeter.cpp" line="586"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../qtractorMidiMeter.cpp" line="667"/>
        <source>Pan: %1</source>
        <translation>声像：%1</translation>
    </message>
    <message>
        <location filename="../qtractorMidiMeter.cpp" line="677"/>
        <source>Volume: %1%</source>
        <translation>音量：%1%</translation>
    </message>
</context>
<context>
    <name>qtractorMidiSysexForm</name>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="34"/>
        <source>MIDI SysEx</source>
        <translation>MIDI 系统专用信息</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="58"/>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="63"/>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="68"/>
        <source>Data (hex)</source>
        <translation>数据 (十六进制)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="76"/>
        <source>Import from SysEx file</source>
        <translation>从系统专用信息文件导入</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="79"/>
        <source>&amp;Import...</source>
        <translation>导入(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="89"/>
        <source>Export to SysEx file</source>
        <translation>导出到系统专用信息文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="92"/>
        <source>E&amp;xport...</source>
        <translation>导出(&amp;X)...</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="115"/>
        <source>Move SysEx item up on list order</source>
        <translation>在列表中将系统专用信息项上移</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="118"/>
        <source>&amp;Up</source>
        <translation>上移(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="128"/>
        <source>Move SysEx item down on list order</source>
        <translation>在列表中将系统专用信息项下移</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="131"/>
        <source>&amp;Down</source>
        <translation>下移(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="144"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="449"/>
        <source>Open SysEx</source>
        <translation>打开系统专用信息</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="160"/>
        <source>Sysex name</source>
        <translation>系统专用信息名称</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="173"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="527"/>
        <source>Save SysEx</source>
        <translation>保存系统专用信息</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="186"/>
        <source>Delete SysEx</source>
        <translation>删除系统专用信息</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="196"/>
        <source>Create SysEx item</source>
        <translation>创建系统专用信息项</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="199"/>
        <source>&amp;Add</source>
        <translation>添加(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="218"/>
        <source>Update SysEx item</source>
        <translation>更新系统专用信息项</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="221"/>
        <source>Upda&amp;te</source>
        <translation>更新(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="231"/>
        <source>Remove SysEx item</source>
        <translation>移除系统专用信息项</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.ui" line="234"/>
        <source>&amp;Remove</source>
        <translation>移除(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="215"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="300"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="452"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="529"/>
        <source>SysEx files (*.%1)</source>
        <translation>系统专用信息文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="216"/>
        <source>MIDI files (*.mid *.smf *.midi)</source>
        <translation>MIDI 文件 (*.mid *.smf *.midi)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="217"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="301"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="453"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="530"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="212"/>
        <source>Import SysEx Files</source>
        <translation>导入系统专用信息文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="297"/>
        <source>Export SysEx File</source>
        <translation>导出系统专用信息文件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="342"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="564"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="608"/>
        <location filename="../qtractorMidiSysexForm.cpp" line="801"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="343"/>
        <source>The SysEx file already exists:

&quot;%1&quot;

Do you want to replace it?</source>
        <translation>系统专用信息文件已存在：

&quot;%1&quot;

是否替换？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="565"/>
        <source>About to replace SysEx:

&quot;%1&quot;

Are you sure?</source>
        <translation>即将替换系统专用信息：

&quot;%1&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="609"/>
        <source>About to delete SysEx:

&quot;%1&quot;

Are you sure?</source>
        <translation>即将删除系统专用信息：

&quot;%1&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="802"/>
        <source>SysEx settings have been changed.

Do you want to apply the changes?</source>
        <translation>系统专用信息设置已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="1078"/>
        <source>Error</source>
        <translation>错误</translation>
    </message>
    <message>
        <location filename="../qtractorMidiSysexForm.cpp" line="1079"/>
        <source>SysEx could not be loaded:

&quot;%1&quot;.

Sorry.</source>
        <translation>无法加载系统专用信息：

&quot;%1&quot;。

抱歉。</translation>
    </message>
</context>
<context>
    <name>qtractorMidiThumbView</name>
    <message>
        <location filename="../qtractorMidiThumbView.cpp" line="76"/>
        <source>MIDI Thumb view</source>
        <translation>MIDI 缩略视图</translation>
    </message>
</context>
<context>
    <name>qtractorMidiToolsForm</name>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="34"/>
        <source>MIDI Tools</source>
        <translation>MIDI 工具</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="63"/>
        <source>Preset name</source>
        <translation>预设名称</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="76"/>
        <source>Save preset</source>
        <translation>保存预设</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="92"/>
        <source>Delete preset</source>
        <translation>删除预设</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="124"/>
        <location filename="../qtractorMidiToolsForm.ui" line="139"/>
        <source>&amp;Quantize</source>
        <translation>量化(&amp;Q)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="136"/>
        <source>Quantize selected events</source>
        <translation>量化选中的事件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="162"/>
        <location filename="../qtractorMidiToolsForm.ui" line="466"/>
        <location filename="../qtractorMidiToolsForm.ui" line="758"/>
        <location filename="../qtractorMidiToolsForm.ui" line="1224"/>
        <source>&amp;Time:</source>
        <translation>时间(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="169"/>
        <source>Quantize time</source>
        <translation>量化时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="182"/>
        <source>Quantize time percent</source>
        <translation>量化时间百分比</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="185"/>
        <location filename="../qtractorMidiToolsForm.ui" line="246"/>
        <location filename="../qtractorMidiToolsForm.ui" line="294"/>
        <location filename="../qtractorMidiToolsForm.ui" line="596"/>
        <location filename="../qtractorMidiToolsForm.ui" line="726"/>
        <location filename="../qtractorMidiToolsForm.ui" line="774"/>
        <location filename="../qtractorMidiToolsForm.ui" line="809"/>
        <location filename="../qtractorMidiToolsForm.ui" line="844"/>
        <location filename="../qtractorMidiToolsForm.ui" line="1240"/>
        <location filename="../qtractorMidiToolsForm.ui" line="1294"/>
        <location filename="../qtractorMidiToolsForm.ui" line="1335"/>
        <location filename="../qtractorMidiToolsForm.ui" line="1453"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="223"/>
        <location filename="../qtractorMidiToolsForm.ui" line="793"/>
        <location filename="../qtractorMidiToolsForm.ui" line="915"/>
        <location filename="../qtractorMidiToolsForm.ui" line="1278"/>
        <source>&amp;Duration:</source>
        <translation>时长(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="230"/>
        <source>Quantize duration</source>
        <translation>量化时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="243"/>
        <source>Quantize duration percent</source>
        <translation>量化时长百分比</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="271"/>
        <source>S&amp;wing:</source>
        <translation>摇摆(&amp;W)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="278"/>
        <source>Swing-quantize time</source>
        <translation>摇摆量化时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="291"/>
        <source>Swing-quantize percent</source>
        <translation>摇摆量化百分比</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="319"/>
        <source>Swing-quantize type</source>
        <translation>摇摆量化类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="323"/>
        <source>Linear</source>
        <translation>线性</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="328"/>
        <source>Quadratic</source>
        <translation>二次</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="333"/>
        <source>Cubic</source>
        <translation>三次</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="354"/>
        <source>&amp;Scale:</source>
        <translation>音阶(&amp;S)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="361"/>
        <source>Scale-quantize key</source>
        <translation>音阶量化调性</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="368"/>
        <source>Scale-quantize type</source>
        <translation>音阶量化类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="389"/>
        <location filename="../qtractorMidiToolsForm.ui" line="404"/>
        <source>&amp;Transpose</source>
        <translation>移调(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="401"/>
        <source>Transpose selected events</source>
        <translation>移调选中的事件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="427"/>
        <location filename="../qtractorMidiToolsForm.ui" line="710"/>
        <source>&amp;Note:</source>
        <translation>音符(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="440"/>
        <source>Transpose note</source>
        <translation>移调音符</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="479"/>
        <source>Transpose time</source>
        <translation>移调时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="486"/>
        <source>Transpose time format</source>
        <translation>移调时间格式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="490"/>
        <location filename="../qtractorMidiToolsForm.ui" line="939"/>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="495"/>
        <location filename="../qtractorMidiToolsForm.ui" line="944"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="500"/>
        <location filename="../qtractorMidiToolsForm.ui" line="949"/>
        <source>BBT</source>
        <translation>BBT</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="521"/>
        <source>&amp;Reverse</source>
        <translation>反转(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="542"/>
        <location filename="../qtractorMidiToolsForm.ui" line="557"/>
        <source>&amp;Normalize</source>
        <translation>标准化(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="554"/>
        <source>Normalize selected events</source>
        <translation>标准化选中的事件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="580"/>
        <source>&amp;Percent:</source>
        <translation>百分比(&amp;P)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="593"/>
        <source>Normalize percent</source>
        <translation>标准化百分比</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="628"/>
        <location filename="../qtractorMidiToolsForm.ui" line="828"/>
        <location filename="../qtractorMidiToolsForm.ui" line="970"/>
        <location filename="../qtractorMidiToolsForm.ui" line="1319"/>
        <source>&amp;Value:</source>
        <translation>值(&amp;V)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="641"/>
        <source>Normalize value</source>
        <translation>标准化值</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="651"/>
        <source>&amp;Compress</source>
        <translation>压缩(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="672"/>
        <location filename="../qtractorMidiToolsForm.ui" line="687"/>
        <source>&amp;Randomize</source>
        <translation>随机化(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="684"/>
        <source>Randomize selected events</source>
        <translation>随机化选中的事件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="723"/>
        <source>Randomize note/pitch</source>
        <translation>随机化音符/音高</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="771"/>
        <source>Randomize time</source>
        <translation>随机化时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="806"/>
        <source>Randomize duration</source>
        <translation>随机化时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="841"/>
        <source>Randomize value</source>
        <translation>随机化值</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="877"/>
        <location filename="../qtractorMidiToolsForm.ui" line="892"/>
        <source>Resi&amp;ze</source>
        <translation>调整(&amp;Z)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="889"/>
        <source>Resize selected events</source>
        <translation>调整选中的事件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="928"/>
        <source>Resize duration</source>
        <translation>调整时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="935"/>
        <source>Resize duration format</source>
        <translation>调整时长格式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="983"/>
        <source>Resize value</source>
        <translation>调整值</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="993"/>
        <source>Resize value mode</source>
        <translation>调整值模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="997"/>
        <source>Flat</source>
        <translation>平坦</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1002"/>
        <source>Ramp</source>
        <translation>渐变</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1016"/>
        <source>Resize final value</source>
        <translation>调整最终值</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1039"/>
        <source>&amp;Legato:</source>
        <translation>连奏(&amp;L)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1052"/>
        <source>Legato trim/extend type</source>
        <translation>连奏修剪/延伸类型</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1056"/>
        <source>Normal</source>
        <translation>常规</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1061"/>
        <source>Trim</source>
        <translation>修剪</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1066"/>
        <source>Extend</source>
        <translation>延伸</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1074"/>
        <source>Legato trim/extend length</source>
        <translation>连奏修剪/延伸长度</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1081"/>
        <source>Legato mode</source>
        <translation>连奏模式</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1085"/>
        <source>Mono</source>
        <translation>单音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1090"/>
        <source>Poly</source>
        <translation>复音</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1119"/>
        <source>&amp;Join</source>
        <translation>连接(&amp;J)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1126"/>
        <source>&amp;Split:</source>
        <translation>分割(&amp;S)：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1133"/>
        <source>Split notes length</source>
        <translation>分割音符长度</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1140"/>
        <source>Split notes offset</source>
        <translation>分割音符偏移</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1144"/>
        <source>Relative</source>
        <translation>相对</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1149"/>
        <source>Absolute</source>
        <translation>绝对</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1186"/>
        <location filename="../qtractorMidiToolsForm.ui" line="1201"/>
        <source>Re&amp;scale</source>
        <translation>缩放(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1198"/>
        <source>Rescale selected events</source>
        <translation>缩放选中的事件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1237"/>
        <source>Rescale time</source>
        <translation>缩放时间</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1291"/>
        <source>Rescale duration</source>
        <translation>缩放时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1332"/>
        <source>Rescale value</source>
        <translation>缩放值</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1360"/>
        <source>&amp;Invert</source>
        <translation>反转(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1381"/>
        <source>T&amp;imeshift</source>
        <translation>时间偏移(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1393"/>
        <source>Timeshift selected events</source>
        <translation>时间偏移选中的事件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1396"/>
        <source>Timeshift</source>
        <translation>时间偏移</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1419"/>
        <source>P:</source>
        <translation>P：</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1432"/>
        <source>Timeshift parameter</source>
        <translation>时间偏移参数</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1460"/>
        <source>Timeshift parameter (log)</source>
        <translation>时间偏移参数 (对数)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1497"/>
        <source>Timeshift curve</source>
        <translation>时间偏移曲线</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1510"/>
        <source>P = 0 : no change.
P &gt; 0 : accelerating shift.
P &lt; 0 : slowing down shift.
Edit head/tail (blue) markers define the shift range.</source>
        <translation>P = 0：无变化。\nP &gt; 0：加速偏移。\nP &lt; 0：减速偏移。\n编辑头/尾 (蓝色) 标记定义渐变范围。</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1520"/>
        <source>Timeshift duration</source>
        <translation>时间偏移时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1541"/>
        <source>T&amp;empo ramp</source>
        <translation>速度渐变(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1553"/>
        <source>Tempo ramp selected events</source>
        <translation>速度渐变选中的事件</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1556"/>
        <source>Tempo ramp</source>
        <translation>速度渐变</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1579"/>
        <source>From</source>
        <translation>从</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1592"/>
        <source>Tempo ramp start</source>
        <translation>速度渐变起点</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1599"/>
        <source>to</source>
        <translation>到</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1612"/>
        <source>Temporamp end</source>
        <translation>速度渐变终点</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1632"/>
        <source>Edit head/tail (blue) markers define the ramp range.</source>
        <translation>编辑头/尾 (蓝色) 标记定义渐变范围。</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.ui" line="1639"/>
        <source>Tempo ramp duration</source>
        <translation>速度渐变时长</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="150"/>
        <source>(default)</source>
        <translation>(默认)</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="885"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="886"/>
        <source>About to delete preset:

&quot;%1&quot;

Are you sure?</source>
        <translation>即将删除预设：

&quot;%1&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="915"/>
        <source>none</source>
        <translation>无</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="920"/>
        <source>quantize</source>
        <translation>量化</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="922"/>
        <source>transpose</source>
        <translation>移调</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="924"/>
        <source>normalize</source>
        <translation>标准化</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="926"/>
        <source>randomize</source>
        <translation>随机化</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="928"/>
        <source>resize</source>
        <translation>调整</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="930"/>
        <source>rescale</source>
        <translation>缩放</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="932"/>
        <source>timeshift</source>
        <translation>时间偏移</translation>
    </message>
    <message>
        <location filename="../qtractorMidiToolsForm.cpp" line="934"/>
        <source>temporamp</source>
        <translation>速度渐变</translation>
    </message>
</context>
<context>
    <name>qtractorMixer</name>
    <message>
        <location filename="../qtractorMixer.cpp" line="1588"/>
        <source>Inputs</source>
        <translation>输入</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="1589"/>
        <source>Tracks</source>
        <translation>轨道</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="1590"/>
        <source>Outputs</source>
        <translation>输出</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="1597"/>
        <source>Mixer</source>
        <translation>混音器</translation>
    </message>
</context>
<context>
    <name>qtractorMixerMeter</name>
    <message>
        <location filename="../qtractorMeter.cpp" line="321"/>
        <source>Pan</source>
        <translation>声像</translation>
    </message>
</context>
<context>
    <name>qtractorMixerRackWidget</name>
    <message>
        <location filename="../qtractorMixer.cpp" line="1132"/>
        <source>&amp;Inputs</source>
        <translation>输入(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="1141"/>
        <source>&amp;Outputs</source>
        <translation>输出(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="1152"/>
        <source>&amp;Monitor</source>
        <translation>监听(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="1166"/>
        <source>&amp;Buses...</source>
        <translation>总线(&amp;B)...</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="1180"/>
        <source>&amp;Audio</source>
        <translation>音频(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="1186"/>
        <source>&amp;MIDI</source>
        <translation>MIDI(&amp;M)</translation>
    </message>
</context>
<context>
    <name>qtractorMixerStrip</name>
    <message>
        <location filename="../qtractorMixer.cpp" line="405"/>
        <source>inputs</source>
        <translation>输入</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="405"/>
        <source>outputs</source>
        <translation>输出</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="406"/>
        <source>Connect %1</source>
        <translation>连接 %1</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="668"/>
        <source>(Audio)</source>
        <translation>(音频)</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="673"/>
        <source>(MIDI)</source>
        <translation>(MIDI)</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="677"/>
        <source>(None)</source>
        <translation>(无)</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="690"/>
        <source>In</source>
        <translation>输入</translation>
    </message>
    <message>
        <location filename="../qtractorMixer.cpp" line="690"/>
        <source>Out</source>
        <translation>输出</translation>
    </message>
</context>
<context>
    <name>qtractorMonitorButton</name>
    <message>
        <location filename="../qtractorMixer.cpp" line="117"/>
        <source>monitor</source>
        <translation>监听</translation>
    </message>
</context>
<context>
    <name>qtractorOptionsForm</name>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="59"/>
        <source>&amp;General</source>
        <translation>常规(&amp;G)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="71"/>
        <source>Session</source>
        <translation>工程</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="86"/>
        <source>Default session &amp;file format:</source>
        <translation>默认工程文件格式(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="102"/>
        <source>Default session file format (suffix)</source>
        <translation>默认工程文件格式 (后缀)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="128"/>
        <source>Whether to create new sessions based on template</source>
        <translation>是否基于模板创建新工程</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="131"/>
        <source>&amp;New session template:</source>
        <translation>新工程模板(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="156"/>
        <source>New session template</source>
        <translation>新工程模板</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="184"/>
        <source>Browse for new session template</source>
        <translation>浏览新工程模板</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="213"/>
        <source>Whether to save backup versions of existing sessions</source>
        <translation>是否保存现有工程的备份版本</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="216"/>
        <source>Save &amp;backup versions of existing sessions:</source>
        <translation>保存现有工程的备份版本(&amp;B)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="229"/>
        <source>Which mode to rename existing session files</source>
        <translation>重命名现有工程文件的模式</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="233"/>
        <source>Increment previous version (default)</source>
        <translation>递增上一版本 (默认)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="238"/>
        <source>Increment current version</source>
        <translation>递增当前版本</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="252"/>
        <source>Whether to enable session auto-save (crash-recovery)</source>
        <translation>是否启用工程自动保存 (崩溃恢复)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="255"/>
        <source>Auto-save current working session every:</source>
        <translation>自动保存当前工作工程间隔：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="268"/>
        <source>Auto-save period (minutes)</source>
        <translation>自动保存周期 (分钟)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="271"/>
        <source> minutes</source>
        <translation> 分钟</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="34"/>
        <location filename="../qtractorOptionsForm.ui" line="296"/>
        <location filename="../qtractorOptionsForm.ui" line="2989"/>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="311"/>
        <source>Whether to ask for confirmation on removal</source>
        <translation>删除时是否要求确认</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="314"/>
        <source>&amp;Confirm removals</source>
        <translation>确认删除(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="343"/>
        <source>Number of &amp;recent files:</source>
        <translation>最近文件数量(&amp;R)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="368"/>
        <source>The maximum number of recent files to keep in menu</source>
        <translation>菜单中保留的最近文件最大数量</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="390"/>
        <source>Whether to capture standard output (stdout/stderr) into messages window</source>
        <translation>是否将标准输出 (stdout/stderr) 捕获到消息窗口</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="393"/>
        <source>Capture standard &amp;output</source>
        <translation>捕获标准输出(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="406"/>
        <source>Whether to show the complete directory path of loaded session files</source>
        <translation>是否显示已加载工程文件的完整目录路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="409"/>
        <source>S&amp;how complete path of session files</source>
        <translation>显示工程文件的完整路径(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="422"/>
        <source>Whether to remove audio peak files on session close</source>
        <translation>关闭工程时是否删除音频峰值文件</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="425"/>
        <source>Auto-remove audio pea&amp;k files</source>
        <translation>自动删除音频峰值文件(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="438"/>
        <source>Whether to keep all tool windows on top of the main window</source>
        <translation>是否将所有工具窗口保持在主窗口之上</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="441"/>
        <source>Keep tool &amp;windows always on top</source>
        <translation>工具窗口保持置顶(&amp;W)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="454"/>
        <source>Whether to try dropping multiple audio files into the same track</source>
        <translation>是否尝试将多个音频文件放入同一轨道</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="457"/>
        <source>&amp;Drop multiple audio files into the same track</source>
        <translation>将多个音频文件放入同一轨道(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="327"/>
        <source>Whether to ask for confirmation on archive directory removal</source>
        <translation>删除归档目录时是否要求确认</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="330"/>
        <source>C&amp;onfirm archive removals</source>
        <translation>确认归档删除(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="473"/>
        <source>Reverse &amp;keyboard modifiers role (Shift/Ctrl)</source>
        <translation>反转键盘修饰键角色 (Shift/Ctrl)(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="486"/>
        <source>Whether to reverse mouse middle-button role on keyboard modifiers (Shift/Ctrl)</source>
        <translation>是否反转鼠标中键的键盘修饰键角色 (Shift/Ctrl)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="489"/>
        <source>Re&amp;verse middle-button modifier role (Shift/Ctrl)</source>
        <translation>反转中键修饰键角色 (Shift/Ctrl)(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="626"/>
        <source>Transport</source>
        <translation>走带</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="641"/>
        <source>Transport &amp;mode:</source>
        <translation>走带模式(&amp;M)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="660"/>
        <source>Transport control mode (JACK)</source>
        <translation>走带控制模式 (JACK)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="667"/>
        <location filename="../qtractorOptionsForm.ui" line="757"/>
        <location filename="../qtractorOptionsForm.ui" line="1391"/>
        <location filename="../qtractorOptionsForm.ui" line="2066"/>
        <location filename="../qtractorOptionsForm.ui" line="2157"/>
        <location filename="../qtractorOptionsForm.ui" line="2219"/>
        <location filename="../qtractorOptionsForm.ui" line="2404"/>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="675"/>
        <source>Slave</source>
        <translation>从属</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="683"/>
        <source>Master</source>
        <translation>主控</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="691"/>
        <source>Full</source>
        <translation>全部</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="705"/>
        <source>Whether to start as timebase master (JACK)</source>
        <translation>是否作为时基主控启动 (JACK)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="708"/>
        <source>&amp;Timebase</source>
        <translation>时基(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="734"/>
        <source>&amp;Loop recording mode (takes):</source>
        <translation>循环录制模式 (片段)(&amp;L)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="753"/>
        <source>Loop recording mode (takes)</source>
        <translation>循环录制模式 (片段)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="762"/>
        <source>First</source>
        <translation>首个</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="767"/>
        <source>Last</source>
        <translation>末个</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="779"/>
        <source>&amp;Audio</source>
        <translation>音频(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="791"/>
        <location filename="../qtractorOptionsForm.ui" line="1813"/>
        <source>Capture / Export</source>
        <translation>录制 / 导出</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1012"/>
        <source>Audio compression quality to use on capture (record) and export</source>
        <translation>录制和导出时使用的音频压缩质量</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="974"/>
        <source>Audio sample format to use on capture (record) and export</source>
        <translation>录制和导出时使用的音频采样格式</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="828"/>
        <source>Audio file type to use on capture (record) and export</source>
        <translation>录制和导出时使用的音频文件类型</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="812"/>
        <source>File &amp;type:</source>
        <translation>文件类型(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="958"/>
        <source>Sample &amp;format:</source>
        <translation>采样格式(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="990"/>
        <source>&amp;Quality:</source>
        <translation>质量(&amp;Q)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1043"/>
        <location filename="../qtractorOptionsForm.ui" line="1396"/>
        <location filename="../qtractorOptionsForm.ui" line="1911"/>
        <location filename="../qtractorOptionsForm.ui" line="2409"/>
        <source>Playback</source>
        <translation>播放</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1058"/>
        <source>Whether to apply time-stretching when tempo changes</source>
        <translation>速度变化时是否应用时间拉伸</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1061"/>
        <source>Aut&amp;omatic time-stretching</source>
        <translation>自动时间拉伸(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1087"/>
        <source>Sample-&amp;rate converter type:</source>
        <translation>采样率转换器类型(&amp;R)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1106"/>
        <source>Sample-rate converter quality</source>
        <translation>采样率转换器质量</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1110"/>
        <source>Sinc (Best Quality)</source>
        <translation>Sinc (最佳质量)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1115"/>
        <source>Sinc (Medium Quality)</source>
        <translation>Sinc (中等质量)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1120"/>
        <source>Sinc (Fastest)</source>
        <translation>Sinc (最快)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1125"/>
        <source>Zero Order Hold</source>
        <translation>零阶保持</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1130"/>
        <source>Linear</source>
        <translation>线性</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1144"/>
        <source>Whether to use WSOLA time-stretching</source>
        <translation>是否使用 WSOLA 时间拉伸</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1147"/>
        <source>&amp;WSOLA time-stretching</source>
        <translation>WSOLA 时间拉伸(&amp;W)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1763"/>
        <location filename="../qtractorOptionsForm.ui" line="2774"/>
        <source>&amp;Offset (latency):</source>
        <translation>偏移 (延迟)(&amp;O)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1788"/>
        <source>Metronome Audio offset (latency)</source>
        <translation>节拍器音频偏移 (延迟)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3220"/>
        <source>&amp;Style theme:</source>
        <translation>样式主题(&amp;S)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1176"/>
        <source>Whether to apply WSOLA quick seek time-stretching</source>
        <translation>是否应用 WSOLA 快速搜索时间拉伸</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="470"/>
        <source>Whether to reverse keyboard modifiers role on transport positioning (Shift/Ctrl)</source>
        <translation>是否反转走带定位的键盘修饰键角色 (Shift/Ctrl)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="502"/>
        <source>Whether to keep all editor windows on top of the main window</source>
        <translation>是否将所有编辑器窗口保持在主窗口之上</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="505"/>
        <source>Keep &amp;editor windows always on top</source>
        <translation>编辑器窗口保持置顶(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="521"/>
        <source>Clips</source>
        <translation>剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="536"/>
        <source>Default &amp;Fade In:</source>
        <translation>默认淡入(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="552"/>
        <source>Default clip fade-in type</source>
        <translation>默认剪辑淡入类型</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="581"/>
        <source>Default &amp;Fade Out:</source>
        <translation>默认淡出(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="597"/>
        <source>Default clip fade-out type</source>
        <translation>默认剪辑淡出类型</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="859"/>
        <source>&amp;Latency:</source>
        <translation>延迟(&amp;L)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="875"/>
        <source>Audio capture/input latency compensation mode</source>
        <translation>音频录制/输入延迟补偿模式</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="879"/>
        <source>Auto</source>
        <translation>自动</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="884"/>
        <source>Add</source>
        <translation>添加</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="889"/>
        <source>Fixed</source>
        <translation>固定</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="912"/>
        <source>Audio capture/input latency conpensation (frames)</source>
        <translation>音频录制/输入延迟补偿 (帧)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="915"/>
        <source> frames</source>
        <translation> 帧</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="943"/>
        <source>Audio capture/input latency conpensation (ms)</source>
        <translation>音频录制/输入延迟补偿 (毫秒)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1160"/>
        <source>Whether to use RubberBand formant preserve</source>
        <translation>是否使用 RubberBand 共振峰保持</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1163"/>
        <source>RubberBand &amp;formant preserve</source>
        <translation>RubberBand 共振峰保持(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1179"/>
        <source>WSOLA quic&amp;k seek</source>
        <translation>WSOLA 快速搜索(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1192"/>
        <source>Whether to use RubberBand R3 finer engine</source>
        <translation>是否使用 RubberBand R3 精细引擎</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1195"/>
        <source>RubberBand R&amp;3 finer engine</source>
        <translation>RubberBand R3 精细引擎(&amp;3)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1208"/>
        <source>Whether to have separate audition/pre-listening player output ports</source>
        <translation>是否拥有独立的试听播放器输出端口</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1211"/>
        <source>Dedicated au&amp;dition/pre-listening player outputs:</source>
        <translation>专用试听播放器输出(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1224"/>
        <source>Whether to auto-connect dedicated audio player outputs</source>
        <translation>是否自动连接专用音频播放器输出</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1227"/>
        <source>Auto-&amp;connect</source>
        <translation>自动连接(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1256"/>
        <source>Connections</source>
        <translation>连接</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1271"/>
        <source>Whether to warn about audio self-connections</source>
        <translation>是否警告音频自连接</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1274"/>
        <source>&amp;Warn about self-connections</source>
        <translation>警告自连接(&amp;W)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1316"/>
        <location filename="../qtractorOptionsForm.ui" line="2275"/>
        <source>Metronome</source>
        <translation>节拍器</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1339"/>
        <source>Whether to enable the audio metronome</source>
        <translation>是否启用音频节拍器</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1342"/>
        <source>&amp;Enable audio metronome</source>
        <translation>启用音频节拍器(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1368"/>
        <location filename="../qtractorOptionsForm.ui" line="2381"/>
        <source>&amp;Count-in:</source>
        <translation>预备拍(&amp;C)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1387"/>
        <location filename="../qtractorOptionsForm.ui" line="2400"/>
        <source>Count-in mode</source>
        <translation>预备拍模式</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1401"/>
        <location filename="../qtractorOptionsForm.ui" line="2414"/>
        <source>Recording</source>
        <translation>录音</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1421"/>
        <location filename="../qtractorOptionsForm.ui" line="2434"/>
        <source>Count-in number</source>
        <translation>预备拍数量</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1424"/>
        <location filename="../qtractorOptionsForm.ui" line="2437"/>
        <source> beats</source>
        <translation> 拍</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1448"/>
        <source>&amp;File (bar):</source>
        <translation>文件 (强拍)(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1479"/>
        <source>Metronome Audio filename (bar)</source>
        <translation>节拍器音频文件名 (强拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1510"/>
        <source>Browse for sample audio file (bar)</source>
        <translation>浏览采样音频文件 (强拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1526"/>
        <source>&amp;Gain (bar):</source>
        <translation>增益 (强拍)(&amp;G)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1551"/>
        <source>Metronome gain (bar)</source>
        <translation>节拍器增益 (强拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1554"/>
        <location filename="../qtractorOptionsForm.ui" line="1685"/>
        <source> dB</source>
        <translation> dB</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1579"/>
        <source>&amp;File (beat):</source>
        <translation>文件 (弱拍)(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1610"/>
        <source>Metronome Audio filename (beat)</source>
        <translation>节拍器音频文件名 (弱拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1641"/>
        <source>Browse for sample audio file (beat)</source>
        <translation>浏览采样音频文件 (弱拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1657"/>
        <source>&amp;Gain (beat):</source>
        <translation>增益 (弱拍)(&amp;G)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1682"/>
        <source>Metronome gain (beat)</source>
        <translation>节拍器增益 (弱拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1718"/>
        <source>Whether to have separate audio metronome output ports</source>
        <translation>是否拥有独立的音频节拍器输出端口</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1734"/>
        <source>Whether to auto-connect dedicated audio metronome outputs</source>
        <translation>是否自动连接专用音频节拍器输出</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1737"/>
        <source>Auto-co&amp;nnect</source>
        <translation>自动连接(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1801"/>
        <source>&amp;MIDI</source>
        <translation>MIDI(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1828"/>
        <source>File &amp;format:</source>
        <translation>文件格式(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1844"/>
        <source>MIDI file format to use on capture (record) and export</source>
        <translation>录制和导出时使用的 MIDI 文件格式</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1870"/>
        <source>&amp;Quantize:</source>
        <translation>量化(&amp;Q)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1895"/>
        <source>MIDI capture (record) quantization</source>
        <translation>MIDI 录制量化</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1932"/>
        <source>Queue &amp;timer (resolution):</source>
        <translation>队列定时器 (分辨率)(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1948"/>
        <source>Queue timer (resolution)</source>
        <translation>队列定时器 (分辨率)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1974"/>
        <source>Whether to enable MIDI queue time drift correction</source>
        <translation>是否启用 MIDI 队列时间漂移校正</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1977"/>
        <source>E&amp;nable MIDI queue time drift correction</source>
        <translation>启用 MIDI 队列时间漂移校正(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1990"/>
        <source>Whether to have separate MIDI player output ports</source>
        <translation>是否拥有独立的 MIDI 播放器输出端口</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1993"/>
        <source>Dedicated MIDI p&amp;layer outputs</source>
        <translation>专用 MIDI 播放器输出(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2006"/>
        <source>Whether to reset/resend all controllers on playback start</source>
        <translation>播放开始时是否重置/重新发送所有控制器</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2009"/>
        <source>&amp;Reset all controllers on playback start</source>
        <translation>播放开始时重置所有控制器(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2025"/>
        <source>Control</source>
        <translation>控制</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2046"/>
        <source>&amp;MMC:</source>
        <translation>MMC(&amp;M)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2062"/>
        <source>MIDI Machine Control (MMC) mode</source>
        <translation>MIDI 机器控制 (MMC) 模式</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2071"/>
        <location filename="../qtractorOptionsForm.ui" line="2162"/>
        <location filename="../qtractorOptionsForm.ui" line="2224"/>
        <source>Input</source>
        <translation>输入</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2076"/>
        <location filename="../qtractorOptionsForm.ui" line="2167"/>
        <location filename="../qtractorOptionsForm.ui" line="2229"/>
        <source>Output</source>
        <translation>输出</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2081"/>
        <location filename="../qtractorOptionsForm.ui" line="2172"/>
        <source>Duplex</source>
        <translation>双工</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2095"/>
        <source>&amp;Device:</source>
        <translation>设备(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2111"/>
        <source>MIDI Machine Control (MMC) device id.</source>
        <translation>MIDI 机器控制 (MMC) 设备 ID。</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2137"/>
        <source>&amp;SPP:</source>
        <translation>SPP(&amp;S)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2153"/>
        <source>MIDI Song Position pointer (SPP) control mode</source>
        <translation>MIDI 歌曲位置指针 (SPP) 控制模式</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2199"/>
        <source>MIDI Cloc&amp;k:</source>
        <translation>MIDI 时钟(&amp;K)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2215"/>
        <source>MIDI Clock control mode</source>
        <translation>MIDI 时钟控制模式</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2243"/>
        <source>Whether to have separate MIDI control ports</source>
        <translation>是否拥有独立的 MIDI 控制端口</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2246"/>
        <source>Dedicated MIDI &amp;control input/output</source>
        <translation>专用 MIDI 控制输入/输出(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2298"/>
        <source>Whether to enable the MIDI metronome</source>
        <translation>是否启用 MIDI 节拍器</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2301"/>
        <source>&amp;Enable MIDI metronome</source>
        <translation>启用 MIDI 节拍器(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2330"/>
        <source>&amp;Channel:</source>
        <translation>通道(&amp;C)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2346"/>
        <source>Metronome MIDI channel</source>
        <translation>节拍器 MIDI 通道</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2461"/>
        <source>&amp;Note (bar):</source>
        <translation>音符 (强拍)(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2486"/>
        <source>Metronome MIDI note (bar)</source>
        <translation>节拍器 MIDI 音符 (强拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2499"/>
        <source>&amp;Velocity (bar):</source>
        <translation>力度 (强拍)(&amp;V)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2524"/>
        <source>Metronome MIDI velocity (bar)</source>
        <translation>节拍器 MIDI 力度 (强拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2546"/>
        <source>&amp;Duration (bar):</source>
        <translation>时长 (强拍)(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2571"/>
        <source>Metronome MIDI duration (bar)</source>
        <translation>节拍器 MIDI 时长 (强拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2574"/>
        <location filename="../qtractorOptionsForm.ui" line="2712"/>
        <location filename="../qtractorOptionsForm.ui" line="2802"/>
        <source> ticks</source>
        <translation> tick</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2599"/>
        <source>&amp;Note (beat):</source>
        <translation>音符 (弱拍)(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2624"/>
        <source>Metronome MIDI note (beat)</source>
        <translation>节拍器 MIDI 音符 (弱拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2637"/>
        <source>&amp;Velocity (beat):</source>
        <translation>力度 (弱拍)(&amp;V)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2662"/>
        <source>Metronome MIDI velocity (beat)</source>
        <translation>节拍器 MIDI 力度 (弱拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2684"/>
        <source>&amp;Duration (beat):</source>
        <translation>时长 (弱拍)(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2709"/>
        <source>Metronome MIDI duration (beat)</source>
        <translation>节拍器 MIDI 时长 (弱拍)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2745"/>
        <source>Whether to have separate MIDI metronome output port</source>
        <translation>是否拥有独立的 MIDI 节拍器输出端口</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2748"/>
        <source>Dedicated M&amp;IDI metronome output</source>
        <translation>专用 MIDI 节拍器输出(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2799"/>
        <source>Metronome MIDI offset (latency)</source>
        <translation>节拍器 MIDI 偏移 (延迟)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2827"/>
        <source>&amp;Display</source>
        <translation>显示(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2839"/>
        <source>Defaults</source>
        <translation>默认</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2854"/>
        <source>&amp;Time display format:</source>
        <translation>时间显示格式(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2870"/>
        <source>Time display format</source>
        <translation>时间显示格式</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2874"/>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2879"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2884"/>
        <source>BBT</source>
        <translation>BBT</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2911"/>
        <source>&amp;Base font size:</source>
        <translation>基础字体大小(&amp;B)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2930"/>
        <source>Base application font size (pt.)</source>
        <translation>应用程序基础字体大小 (pt.)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2937"/>
        <location filename="../qtractorOptionsForm.ui" line="3162"/>
        <location filename="../qtractorOptionsForm.ui" line="3243"/>
        <location filename="../qtractorOptionsForm.ui" line="3283"/>
        <location filename="../qtractorOptionsForm.ui" line="3360"/>
        <location filename="../qtractorOptionsForm.cpp" line="103"/>
        <source>(default)</source>
        <translation>(默认)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2942"/>
        <source>6</source>
        <translation>6</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2947"/>
        <source>7</source>
        <translation>7</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2952"/>
        <source>8</source>
        <translation>8</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2957"/>
        <source>9</source>
        <translation>9</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2962"/>
        <source>10</source>
        <translation>10</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2967"/>
        <source>11</source>
        <translation>11</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="2972"/>
        <source>12</source>
        <translation>12</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3010"/>
        <source>Whether to use desktop environment native dialogs.</source>
        <translation>是否使用桌面环境原生对话框。</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3013"/>
        <source>Use desktop environment &amp;native dialogs</source>
        <translation>使用桌面环境原生对话框(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3201"/>
        <source>Manage custom color palette themes</source>
        <translation>管理自定义调色板主题</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3260"/>
        <source>&amp;Icons theme:</source>
        <translation>图标主题(&amp;I)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3276"/>
        <source>Custom icons theme directory</source>
        <translation>自定义图标主题目录</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3318"/>
        <source>Browse for custom icons theme directory</source>
        <translation>浏览自定义图标主题目录</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3337"/>
        <source>St&amp;yle sheet:</source>
        <translation>样式表(&amp;Y)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3353"/>
        <source>Custom style sheet (*.qss)</source>
        <translation>自定义样式表 (*.qss)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3395"/>
        <source>Browse for custom style sheet (*.qss)</source>
        <translation>浏览自定义样式表 (*.qss)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4197"/>
        <source>Move down path</source>
        <translation>下移路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4404"/>
        <source>Whether to select plugin&apos;s editor (GUI) if more than one are available</source>
        <translation>如果有多个可用的插件编辑器 (GUI)，是否选择</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4436"/>
        <source>Blacklist</source>
        <translation>黑名单</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4459"/>
        <source>Plugin blacklist path</source>
        <translation>插件黑名单路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4487"/>
        <source>Browse plugin blacklist path</source>
        <translation>浏览插件黑名单路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4518"/>
        <source>Add plugin blacklist path</source>
        <translation>添加插件黑名单路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4545"/>
        <source>Plugin blacklist paths</source>
        <translation>插件黑名单路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4576"/>
        <source>Remove plugin blacklist path</source>
        <translation>移除插件黑名单路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4620"/>
        <source>Clear plugin blacklist paths</source>
        <translation>清除插件黑名单路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4623"/>
        <source>&amp;Clear</source>
        <translation>清除(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4637"/>
        <source>&amp;OSC</source>
        <translation>OSC(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4655"/>
        <source>Server</source>
        <translation>服务器</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4670"/>
        <source>Whether to enable OSC control server/listener</source>
        <translation>是否启用 OSC 控制服务器/监听器</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4673"/>
        <source>Enable &amp;OSC server/listener</source>
        <translation>启用 OSC 服务器/监听器(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4699"/>
        <source>&amp;URL: osc.udp://localhost:</source>
        <translation>URL(&amp;U)：osc.udp://localhost：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4715"/>
        <source>OSC server/listener port</source>
        <translation>OSC 服务器/监听器端口</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4740"/>
        <source>Actions</source>
        <translation>操作</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4755"/>
        <source>OSC actions search string (regular expression)</source>
        <translation>OSC 操作搜索字符串 (正则表达式)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4771"/>
        <source>OSC actions</source>
        <translation>OSC 操作</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4798"/>
        <source>OSC actions filter</source>
        <translation>OSC 操作过滤器</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4802"/>
        <source>All</source>
        <translation>全部</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4807"/>
        <source>Checked</source>
        <translation>已勾选</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4812"/>
        <source>Unchecked</source>
        <translation>未勾选</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4832"/>
        <source>Check OSC actions</source>
        <translation>勾选 OSC 操作</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4835"/>
        <source>&amp;Check</source>
        <translation>勾选(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4857"/>
        <source>Uncheck OSC actions</source>
        <translation>取消勾选 OSC 操作</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4860"/>
        <source>U&amp;ncheck</source>
        <translation>取消勾选(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4895"/>
        <source>Reset OSC actions</source>
        <translation>重置 OSC 操作</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3115"/>
        <source>Custom</source>
        <translation>自定义</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3136"/>
        <source>&amp;Color theme:</source>
        <translation>颜色主题(&amp;C)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3155"/>
        <source>Custom color palette theme</source>
        <translation>自定义调色板主题</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3167"/>
        <source>Wonton Soup</source>
        <translatorcomment>DO NOT TRANSLATE</translatorcomment>
        <translation>馄饨汤</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3172"/>
        <source>KXStudio</source>
        <translatorcomment>DO NOT TRANSLATE</translatorcomment>
        <translation>KXStudio</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3236"/>
        <source>Custom widget style theme</source>
        <translation>自定义组件样式主题</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3427"/>
        <source>Meters</source>
        <translation>电平表</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3442"/>
        <source>&amp;Audio:</source>
        <translation>音频(&amp;A)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3464"/>
        <source>Audio meter level</source>
        <translation>音频电平表级别</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3468"/>
        <location filename="../qtractorOptionsForm.ui" line="3607"/>
        <source>Over</source>
        <translation>过载</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3473"/>
        <source>0 dB</source>
        <translation>0 dB</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3478"/>
        <source>3 dB</source>
        <translation>3 dB</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3483"/>
        <source>6 dB</source>
        <translation>6 dB</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3488"/>
        <source>10 dB</source>
        <translation>10 dB</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3513"/>
        <source>Audio meter color</source>
        <translation>音频电平表颜色</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3541"/>
        <source>Select custom audio meter color</source>
        <translation>选择自定义音频电平表颜色</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3204"/>
        <location filename="../qtractorOptionsForm.ui" line="3547"/>
        <location filename="../qtractorOptionsForm.ui" line="3666"/>
        <location filename="../qtractorOptionsForm.ui" line="4049"/>
        <location filename="../qtractorOptionsForm.ui" line="4277"/>
        <location filename="../qtractorOptionsForm.ui" line="4490"/>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3573"/>
        <source>&amp;MIDI:</source>
        <translation>MIDI(&amp;M)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3598"/>
        <source>MIDI meter level</source>
        <translation>MIDI 电平表级别</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3602"/>
        <source>Peak</source>
        <translation>峰值</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3632"/>
        <source>MIDI meter color</source>
        <translation>MIDI 电平表颜色</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3660"/>
        <source>Select custom MIDI meter color</source>
        <translation>选择自定义 MIDI 电平表颜色</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3692"/>
        <source>Reset meter colors to default</source>
        <translation>重置电平表颜色为默认</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3695"/>
        <location filename="../qtractorOptionsForm.ui" line="4898"/>
        <source>&amp;Reset</source>
        <translation>重置(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3727"/>
        <source>Messages</source>
        <translation>消息</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3760"/>
        <source>Sample messages text font display</source>
        <translation>消息文本字体显示示例</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3785"/>
        <source>Select font for the messages text display</source>
        <translation>为消息文本显示选择字体</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3788"/>
        <source>&amp;Font...</source>
        <translation>字体(&amp;F)...</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3817"/>
        <source>Whether to keep a maximum number of lines in the messages window</source>
        <translation>消息窗口中是否保持最大行数</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3820"/>
        <source>M&amp;essages limit:</source>
        <translation>消息限制(&amp;E)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3833"/>
        <source>The maximum number of message lines to keep in view</source>
        <translation>视图中保留的最大消息行数</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3836"/>
        <source> lines</source>
        <translation> 行</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3026"/>
        <source>Whether to hold auto-scrolling (follow play-head) on edits.</source>
        <translation>编辑时是否保持自动滚动 (跟随播放头)。</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="1721"/>
        <source>Dedicated audio &amp;metronome outputs:</source>
        <translation>专用音频节拍器输出(&amp;M)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3029"/>
        <source>&amp;Hold auto-scrolling (follow play-head) on edits</source>
        <translation>编辑时保持自动滚动 (跟随播放头)(&amp;H)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3055"/>
        <source>Trac&amp;k color saturation:</source>
        <translation>轨道颜色饱和度(&amp;K)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3074"/>
        <source>Default new track color saturation</source>
        <translation>默认新轨道颜色饱和度</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3077"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3493"/>
        <location filename="../qtractorOptionsForm.ui" line="3612"/>
        <source>Back</source>
        <translation>返回</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3864"/>
        <source>Logging</source>
        <translation>日志记录</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3897"/>
        <source>Messages log file</source>
        <translation>消息日志文件</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3928"/>
        <source>Browse for the messages log file location</source>
        <translation>浏览消息日志文件位置</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3944"/>
        <source>Whether to activate a messages logging to file.</source>
        <translation>是否激活消息日志记录到文件。</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3947"/>
        <source>Messages &amp;log file:</source>
        <translation>消息日志文件(&amp;L)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3958"/>
        <source>&amp;Plugins</source>
        <translation>插件(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3976"/>
        <source>Paths</source>
        <translation>路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="3999"/>
        <source>Plugin type</source>
        <translation>插件类型</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4018"/>
        <source>Plugin path</source>
        <translation>插件路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4046"/>
        <source>Browse plugin path</source>
        <translation>浏览插件路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4077"/>
        <source>Add plugin path</source>
        <translation>添加插件路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4080"/>
        <location filename="../qtractorOptionsForm.ui" line="4521"/>
        <source>&amp;Add</source>
        <translation>添加(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4104"/>
        <source>Plugin paths</source>
        <translation>插件路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4135"/>
        <source>Remove plugin path</source>
        <translation>移除插件路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4138"/>
        <location filename="../qtractorOptionsForm.ui" line="4579"/>
        <source>&amp;Remove</source>
        <translation>移除(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4166"/>
        <source>Move up path</source>
        <translation>上移路径</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4169"/>
        <source>&amp;Up</source>
        <translation>上移(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4200"/>
        <source>&amp;Down</source>
        <translation>下移(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4218"/>
        <source>&amp;LV2 Presets directory:</source>
        <translation>LV2 预设目录(&amp;L)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4246"/>
        <source>LV2 Presets directory (default: ~/.lv2)</source>
        <translation>LV2 预设目录 (默认：~/.lv2)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4274"/>
        <source>Browse LV2 Presets directory</source>
        <translation>浏览 LV2 预设目录</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4298"/>
        <source>Instruments</source>
        <translation>乐器</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4319"/>
        <source>Whether to have separate audio output ports</source>
        <translation>是否拥有独立的音频输出端口</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4322"/>
        <source>Dedicated audi&amp;o outputs:</source>
        <translation>专用音频输出(&amp;O)：</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4335"/>
        <source>Whether to auto-connect dedicated audio output ports</source>
        <translation>是否自动连接专用音频输出端口</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4338"/>
        <source>Au&amp;to-connect</source>
        <translation>自动连接(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4367"/>
        <source>Editor</source>
        <translation>编辑器</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4388"/>
        <source>Whether to open plugin&apos;s editor (GUI) by default</source>
        <translation>是否默认打开插件编辑器 (GUI)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4391"/>
        <source>Open plugin&apos;s &amp;editor (GUI) by default</source>
        <translation>默认打开插件编辑器 (GUI)(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.ui" line="4407"/>
        <source>&amp;Select plugin&apos;s editor (GUI) if more than one are available</source>
        <translation>如果有多个可用的插件编辑器 (GUI)，是否选择(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="85"/>
        <source>XML Default (*.%1)</source>
        <translation>XML 默认 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="86"/>
        <source>XML Regular (*.%1)</source>
        <translation>XML 常规 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="87"/>
        <source>ZIP Archive (*.%1)</source>
        <translation>ZIP 归档 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="203"/>
        <source>(Any)</source>
        <translation>(任意)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1268"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1269"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1333"/>
        <source>%1 ms</source>
        <translation>%1 毫秒</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1346"/>
        <source>Metronome Bar Audio File</source>
        <translation>节拍器强拍音频文件</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1360"/>
        <source>Metronome Beat Audio File</source>
        <translation>节拍器弱拍音频文件</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1494"/>
        <source>Open Style Sheet</source>
        <translation>打开样式表</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1497"/>
        <source>Style Sheet files (*.%1)</source>
        <translation>样式表文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1543"/>
        <source>Icons Theme Directory</source>
        <translation>图标主题目录</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1629"/>
        <source>Audio Meter Color</source>
        <translation>音频电平表颜色</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1651"/>
        <source>MIDI Meter Color</source>
        <translation>MIDI 电平表颜色</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1754"/>
        <source>Plug-in Directory</source>
        <translation>插件目录</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="2038"/>
        <source>LV2 Presets Directory</source>
        <translation>LV2 预设目录</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="2090"/>
        <source>Plug-in Blacklist</source>
        <translation>插件黑名单</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="2099"/>
        <source>Plug-in files (*.%1)</source>
        <translation>插件文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="2215"/>
        <source>Messages Font</source>
        <translation>消息字体</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="2243"/>
        <source>Messages Log</source>
        <translation>消息日志</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="2246"/>
        <source>Log files (*.%1)</source>
        <translation>日志文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="1498"/>
        <location filename="../qtractorOptionsForm.cpp" line="2100"/>
        <location filename="../qtractorOptionsForm.cpp" line="2247"/>
        <location filename="../qtractorOptionsForm.cpp" line="2293"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="2289"/>
        <source>Session Template</source>
        <translation>工程模板</translation>
    </message>
    <message>
        <location filename="../qtractorOptionsForm.cpp" line="2292"/>
        <source>Session template files (*.qtr *.qts *.%1)</source>
        <translation>工程模板文件 (*.qtr *.qts *.%1)</translation>
    </message>
</context>
<context>
    <name>qtractorPaletteForm</name>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="39"/>
        <source>Color Themes</source>
        <translation>颜色主题</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="45"/>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="63"/>
        <source>Current color palette name</source>
        <translation>当前调色板名称</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="79"/>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="76"/>
        <source>Save current color palette name</source>
        <translation>保存当前调色板名称</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="92"/>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="89"/>
        <source>Delete current color palette name</source>
        <translation>删除当前调色板名称</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="105"/>
        <source>Palette</source>
        <translation>调色板</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="117"/>
        <source>Current color palette</source>
        <translation>当前调色板</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="127"/>
        <source>Generate:</source>
        <translation>生成：</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="143"/>
        <source>Base color to generate palette</source>
        <translation>生成调色板的基础颜色</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="153"/>
        <source> Reset</source>
        <translation> 重置</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="150"/>
        <source>Reset all current palette colors</source>
        <translation>重置所有当前调色板颜色</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="176"/>
        <source>Import a custom color theme (palette) from file</source>
        <translation>从文件导入自定义颜色主题 (调色板)</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="179"/>
        <source>Import...</source>
        <translation>导入...</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="189"/>
        <source>Export a custom color theme (palette) to file</source>
        <translation>导出自定义颜色主题 (调色板) 到文件</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="192"/>
        <source>Export...</source>
        <translation>导出...</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.ui" line="215"/>
        <source>Show Details</source>
        <translation>显示详情</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="346"/>
        <source>Import File - %1</source>
        <translation>导入文件 - %1</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="262"/>
        <location filename="../qtractorPaletteForm.cpp" line="349"/>
        <location filename="../qtractorPaletteForm.cpp" line="394"/>
        <source>Palette files (*.%1)</source>
        <translation>调色板文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="260"/>
        <source>Save Palette - %1</source>
        <translation>保存调色板 - %1</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="263"/>
        <location filename="../qtractorPaletteForm.cpp" line="350"/>
        <location filename="../qtractorPaletteForm.cpp" line="395"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="381"/>
        <location filename="../qtractorPaletteForm.cpp" line="757"/>
        <location filename="../qtractorPaletteForm.cpp" line="765"/>
        <source>Warning - %1</source>
        <translation>警告 - %1</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="382"/>
        <source>Could not import from file:

%1

Sorry.</source>
        <translation>无法从文件导入：

%1

抱歉。</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="391"/>
        <source>Export File - %1</source>
        <translation>导出文件 - %1</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="758"/>
        <source>Some settings have been changed.

Do you want to discard the changes?</source>
        <translation>某些设置已更改。

是否放弃这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="766"/>
        <source>Some settings have been changed:

&quot;%1&quot;.

Do you want to save the changes?</source>
        <translation>某些设置已更改：

&quot;%1&quot;。

是否保存更改？</translation>
    </message>
</context>
<context>
    <name>qtractorPaletteForm::PaletteModel</name>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="1009"/>
        <source>Color Role</source>
        <translation>颜色角色</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="1012"/>
        <source>Active</source>
        <translation>激活</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="1015"/>
        <source>Inactive</source>
        <translation>未激活</translation>
    </message>
    <message>
        <location filename="../qtractorPaletteForm.cpp" line="1018"/>
        <source>Disabled</source>
        <translation>已禁用</translation>
    </message>
</context>
<context>
    <name>qtractorPasteRepeatForm</name>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="37"/>
        <source>Paste Repeat</source>
        <translation>重复粘贴</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="46"/>
        <source>Repeat</source>
        <translation>重复</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="52"/>
        <source>&amp;Count:</source>
        <translation>次数(&amp;C)：</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="62"/>
        <source>Repeat count</source>
        <translation>重复次数</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="88"/>
        <source>&amp;Period:</source>
        <translation>周期(&amp;P)：</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="101"/>
        <source>Repeat period</source>
        <translation>重复周期</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="108"/>
        <source>Repeat period format</source>
        <translation>重复周期格式</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="112"/>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="117"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.ui" line="122"/>
        <source>BBT</source>
        <translation>BBT</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.cpp" line="161"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorPasteRepeatForm.cpp" line="162"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
</context>
<context>
    <name>qtractorPluginForm</name>
    <message>
        <location filename="../qtractorPluginForm.ui" line="34"/>
        <source>Plugin Properties</source>
        <translation>插件属性</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="54"/>
        <source>Open preset</source>
        <translation>打开预设</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="73"/>
        <source>Preset name</source>
        <translation>预设名称</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="86"/>
        <source>Save preset</source>
        <translation>保存预设</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="102"/>
        <source>Delete preset</source>
        <translation>删除预设</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="131"/>
        <source>Alias:</source>
        <translation>别名：</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="147"/>
        <source>Plugin alias</source>
        <translation>插件别名</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="160"/>
        <source>Edit plugin</source>
        <translation>编辑插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="163"/>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="182"/>
        <source>Active</source>
        <translation>激活</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="201"/>
        <source>About</source>
        <translation>关于</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="279"/>
        <source>Outputs (Sends)</source>
        <translation>输出 (发送)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="282"/>
        <source>Sends</source>
        <translation>发送</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="295"/>
        <source>Inputs (Returns)</source>
        <translation>输入 (返回)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="298"/>
        <source>Returns</source>
        <translation>返回</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="308"/>
        <source>Auto-connect</source>
        <translation>自动连接</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="315"/>
        <source>Aux Send Bus:</source>
        <translation>辅助发送总线：</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="347"/>
        <source>Manage buses</source>
        <translation>管理总线</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="350"/>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="372"/>
        <source>Audio bus I/O matrix</source>
        <translation>音频总线 I/O 矩阵</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="375"/>
        <source>I/O Matrix...</source>
        <translation>I/O 矩阵...</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="413"/>
        <source>Direct Access Parameter</source>
        <translation>直接访问参数</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.ui" line="416"/>
        <source>Direct Access</source>
        <translation>直接访问</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="269"/>
        <source>Page %1</source>
        <translation>第 %1 页</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="401"/>
        <source>%1 [%2], %3 instance(s), %4 channel(s).</source>
        <translation>%1 [%2]，%3 个实例，%4 个通道。</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="562"/>
        <location filename="../qtractorPluginForm.cpp" line="608"/>
        <source>(none)</source>
        <translation>(无)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="717"/>
        <source>Open Preset</source>
        <translation>打开预设</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="720"/>
        <location filename="../qtractorPluginForm.cpp" line="819"/>
        <source>Preset files (*.%1)</source>
        <translation>预设文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="721"/>
        <location filename="../qtractorPluginForm.cpp" line="820"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="762"/>
        <location filename="../qtractorPluginForm.cpp" line="864"/>
        <source>Error</source>
        <translation>错误</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="763"/>
        <source>Preset could not be loaded from file:

&quot;%1&quot;.

Sorry.</source>
        <translation>无法从文件加载预设：

&quot;%1&quot;。

抱歉。</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="817"/>
        <source>Save Preset</source>
        <translation>保存预设</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="865"/>
        <source>Preset could not be saved to file:

&quot;%1&quot;.

Sorry.</source>
        <translation>无法将预设保存到文件：

&quot;%1&quot;。

抱歉。</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="897"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="898"/>
        <source>About to delete preset:

&quot;%1&quot; (%2)

Are you sure?</source>
        <translation>即将删除预设：

&quot;%1&quot; (%2)

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="1421"/>
        <source>Latency: %1 ms (%2 frames)</source>
        <translation>延迟：%1 毫秒 (%2 帧)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="1425"/>
        <source>(no latency)</source>
        <translation>(无延迟)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="1165"/>
        <source>&amp;None</source>
        <translation>无(&amp;N)</translation>
    </message>
</context>
<context>
    <name>qtractorPluginListView</name>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="540"/>
        <source>copy plugin</source>
        <translation>复制插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="680"/>
        <source>activate all plugins</source>
        <translation>激活所有插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="711"/>
        <source>deactivate all plugins</source>
        <translation>停用所有插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="742"/>
        <source>remove all plugins</source>
        <translation>移除所有插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="928"/>
        <source>Import Plugins</source>
        <translation>导入插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="931"/>
        <location filename="../qtractorPluginListView.cpp" line="1044"/>
        <source>XML files (*.%1)</source>
        <translation>XML 文件 (*.%1)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="932"/>
        <location filename="../qtractorPluginListView.cpp" line="1045"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="974"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="975"/>
        <source>About to remove and import all plugins:

&quot;%1&quot;

Are you sure?</source>
        <translation>即将移除并导入所有插件：

&quot;%1&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="1041"/>
        <source>Export Plugins</source>
        <translation>导出插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="1582"/>
        <source>Aux Send: </source>
        <translation>辅助发送：</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="1900"/>
        <source>&amp;Move Here</source>
        <translation>移动到此(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="1901"/>
        <source>&amp;Copy Here</source>
        <translation>复制到此(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="1904"/>
        <source>C&amp;ancel</source>
        <translation>取消(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2007"/>
        <source>&amp;Add Plugin...</source>
        <translation>添加插件(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2010"/>
        <source>I&amp;nserts</source>
        <translation>插入(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2013"/>
        <source>&amp;Audio</source>
        <translation>音频(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2017"/>
        <location filename="../qtractorPluginListView.cpp" line="2046"/>
        <source>Add &amp;Insert</source>
        <translation>添加插入(&amp;I)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2020"/>
        <location filename="../qtractorPluginListView.cpp" line="2050"/>
        <source>Add &amp;Aux Send</source>
        <translation>添加辅助发送(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2029"/>
        <location filename="../qtractorPluginListView.cpp" line="2062"/>
        <source>&amp;Sends</source>
        <translation>发送(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2033"/>
        <location filename="../qtractorPluginListView.cpp" line="2066"/>
        <source>&amp;Returns</source>
        <translation>返回(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2042"/>
        <source>&amp;MIDI</source>
        <translation>MIDI(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2055"/>
        <source>Add &amp;Controller</source>
        <translation>添加控制器(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2084"/>
        <source>Ac&amp;tivate</source>
        <translation>激活(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2091"/>
        <source>Acti&amp;vate All</source>
        <translation>全部激活(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2098"/>
        <source>Deactivate Al&amp;l</source>
        <translation>全部停用(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2107"/>
        <source>&amp;Remove</source>
        <translation>移除(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2111"/>
        <source>Re&amp;move All</source>
        <translation>全部移除(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2118"/>
        <source>Move &amp;Up</source>
        <translation>上移(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2123"/>
        <source>Move &amp;Down</source>
        <translation>下移(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2128"/>
        <source>Pre&amp;set</source>
        <translation>预设(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2147"/>
        <source>Dire&amp;ct Access</source>
        <translation>直接访问(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2166"/>
        <source>&amp;None</source>
        <translation>无(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2179"/>
        <source>&amp;Properties...</source>
        <translation>属性(&amp;P)...</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2186"/>
        <source>&amp;Edit</source>
        <translation>编辑(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2194"/>
        <source>&amp;Import...</source>
        <translation>导入(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2198"/>
        <source>E&amp;xport...</source>
        <translation>导出(&amp;X)...</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2210"/>
        <source>&amp;Outputs</source>
        <translation>输出(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2228"/>
        <source>&amp;Dedicated</source>
        <translation>专用(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginListView.cpp" line="2070"/>
        <location filename="../qtractorPluginListView.cpp" line="2232"/>
        <source>&amp;Auto-connect</source>
        <translation>自动连接(&amp;A)</translation>
    </message>
</context>
<context>
    <name>qtractorPluginParamWidget</name>
    <message>
        <location filename="../qtractorPluginForm.cpp" line="1884"/>
        <source>Open File</source>
        <translation>打开文件</translation>
    </message>
</context>
<context>
    <name>qtractorPluginSelectForm</name>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="34"/>
        <source>Plugins</source>
        <translation>插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="75"/>
        <source>Reset filter</source>
        <translation>重置过滤器</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="78"/>
        <source>X</source>
        <translation>X</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="91"/>
        <source>Plugin search string (regular expression)</source>
        <translation>插件搜索字符串 (正则表达式)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="107"/>
        <source>Plugin type</source>
        <translation>插件类型</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="125"/>
        <source>Available plugins</source>
        <translation>可用插件</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="150"/>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="155"/>
        <source>Audio</source>
        <translation>音频</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="160"/>
        <source>MIDI</source>
        <translation>MIDI</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="165"/>
        <source>Control</source>
        <translation>控制</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="170"/>
        <source>Modes</source>
        <translation>模式</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="175"/>
        <source>Path</source>
        <translation>路径</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="180"/>
        <source>Index</source>
        <translation>索引</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="185"/>
        <source>Instances</source>
        <translation>实例</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="190"/>
        <source>Type</source>
        <translation>类型</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="247"/>
        <source>Plugin scanning in progress...</source>
        <translation>正在扫描插件...</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="206"/>
        <source>Rescan for available plugins (refresh)</source>
        <translation>重新扫描可用插件 (刷新)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.ui" line="209"/>
        <source>&amp;Rescan</source>
        <translation>重新扫描(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.cpp" line="349"/>
        <source>GUI</source>
        <translation>GUI</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.cpp" line="351"/>
        <source>EXT</source>
        <translation>EXT</translation>
    </message>
    <message>
        <location filename="../qtractorPluginSelectForm.cpp" line="353"/>
        <source>RT</source>
        <translation>RT</translation>
    </message>
</context>
<context>
    <name>qtractorSessionForm</name>
    <message>
        <location filename="../qtractorSessionForm.ui" line="43"/>
        <location filename="../qtractorSessionForm.ui" line="56"/>
        <source>Session</source>
        <translation>工程</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="62"/>
        <source>&amp;Name:</source>
        <translation>名称(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="78"/>
        <source>Session name</source>
        <translation>工程名称</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="90"/>
        <source>&amp;Directory:</source>
        <translation>目录(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="100"/>
        <source>Whether to auto-name the session directory</source>
        <translation>是否自动命名工程目录</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="103"/>
        <source>&amp;Auto</source>
        <translation>自动(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="136"/>
        <source>Session directory</source>
        <translation>工程目录</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="164"/>
        <source>Browse for session directory</source>
        <translation>浏览工程目录</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="167"/>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="176"/>
        <source>&amp;Description:</source>
        <translation>描述(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="186"/>
        <source>Session description</source>
        <translation>工程描述</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="194"/>
        <source>Properties</source>
        <translation>属性</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="200"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="206"/>
        <source>Sample &amp;Rate:</source>
        <translation>采样率(&amp;R)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="219"/>
        <source>Sample rate (Hz)</source>
        <translation>采样率 (Hz)</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="226"/>
        <source>44100</source>
        <translation>44100</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="231"/>
        <source>48000</source>
        <translation>48000</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="236"/>
        <source>96000</source>
        <translation>96000</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="241"/>
        <source>192000</source>
        <translation>192000</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="249"/>
        <source>&amp;Tempo:</source>
        <translation>速度(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="268"/>
        <source>Tempo (BPM) / Signature</source>
        <translation>速度 (BPM) / 拍号</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="275"/>
        <source>T&amp;icks/Beat:</source>
        <translation>tick/拍(&amp;I)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="288"/>
        <source>Resolution (ticks/beat; tpqn)</source>
        <translation>分辨率 (tick/拍；tpqn)</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="323"/>
        <source>View</source>
        <translation>视图</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="329"/>
        <source>&amp;Snap/Beat:</source>
        <translation>吸附/拍(&amp;S)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="342"/>
        <source>Snap/beat</source>
        <translation>吸附/拍</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="352"/>
        <source>&amp;Pixels/Beat:</source>
        <translation>像素/拍(&amp;P)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="365"/>
        <source>Pixels/beat</source>
        <translation>像素/拍</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="384"/>
        <source>&amp;Horizontal Zoom:</source>
        <translation>水平缩放(&amp;H)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="397"/>
        <source>Horizontal Zoom (%)</source>
        <translation>水平缩放 (%)</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="400"/>
        <location filename="../qtractorSessionForm.ui" line="435"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="419"/>
        <source>&amp;Vertical Zoom:</source>
        <translation>垂直缩放(&amp;V)：</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.ui" line="432"/>
        <source>Vertical Zoom (%)</source>
        <translation>垂直缩放 (%)</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.cpp" line="226"/>
        <location filename="../qtractorSessionForm.cpp" line="286"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.cpp" line="227"/>
        <source>Session directory does not exist:

&quot;%1&quot;

Do you want to create it?</source>
        <translation>工程目录不存在：

&quot;%1&quot;

是否创建？</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.cpp" line="287"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorSessionForm.cpp" line="377"/>
        <source>Session Directory</source>
        <translation>工程目录</translation>
    </message>
</context>
<context>
    <name>qtractorShortcutForm</name>
    <message>
        <location filename="../qtractorShortcutForm.ui" line="34"/>
        <source>Shortcuts</source>
        <translation>快捷键</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.ui" line="49"/>
        <source>Shortcut search string (regular expression)</source>
        <translation>快捷键搜索字符串 (正则表达式)</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.ui" line="96"/>
        <source>Menu/Action</source>
        <translation>菜单/操作</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.ui" line="101"/>
        <source>Description</source>
        <translation>描述</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.ui" line="106"/>
        <source>Keyboard</source>
        <translation>键盘</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.ui" line="111"/>
        <source>MIDI Controller</source>
        <translation>MIDI 控制器</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.cpp" line="359"/>
        <source>Search shortcuts</source>
        <translation>搜索快捷键</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.cpp" line="462"/>
        <location filename="../qtractorShortcutForm.cpp" line="604"/>
        <location filename="../qtractorShortcutForm.cpp" line="624"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.cpp" line="463"/>
        <source>Keyboard shortcut (%1) already assigned (%2).</source>
        <translation>键盘快捷键 (%1) 已被分配 (%2)。</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.cpp" line="605"/>
        <source>Keyboard shortcuts have been changed.

Do you want to apply the changes?</source>
        <translation>键盘快捷键已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.cpp" line="625"/>
        <source>MIDI Controller shortcuts have been changed.

Do you want to apply the changes?</source>
        <translation>MIDI 控制器快捷键已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorShortcutForm.cpp" line="693"/>
        <source>&amp;MIDI Controller...</source>
        <translation>MIDI 控制器(&amp;M)...</translation>
    </message>
</context>
<context>
    <name>qtractorTakeRangeForm</name>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="46"/>
        <source>Range</source>
        <translation>范围</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="62"/>
        <source>Selection range</source>
        <translation>选择范围</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="65"/>
        <source>&amp;Selection</source>
        <translation>选择(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="117"/>
        <source>Loop range</source>
        <translation>循环范围</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="120"/>
        <source>&amp;Loop</source>
        <translation>循环(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="166"/>
        <source>Punch range</source>
        <translation>插入录音范围</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="169"/>
        <source>&amp;Punch</source>
        <translation>插入录音(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="225"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="230"/>
        <source>BBT</source>
        <translation>BBT</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="91"/>
        <source>Edit range</source>
        <translation>编辑范围</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="94"/>
        <source>&amp;Edit</source>
        <translation>编辑(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="104"/>
        <source>Custom range</source>
        <translation>自定义范围</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="107"/>
        <source>&amp;Custom</source>
        <translation>自定义(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="156"/>
        <source>St&amp;art:</source>
        <translation>开始(&amp;A)：</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="136"/>
        <source>Clip start</source>
        <translation>剪辑起点</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="37"/>
        <source>Take Range</source>
        <translation>片段范围</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="52"/>
        <source>En&amp;d:</source>
        <translation>结束(&amp;D)：</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="149"/>
        <source>Clip offset</source>
        <translation>剪辑偏移</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="182"/>
        <source>Select</source>
        <translation>选择</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="200"/>
        <source>Current take</source>
        <translation>当前片段</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="210"/>
        <source>Format</source>
        <translation>格式</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="216"/>
        <source>Time display format</source>
        <translation>时间显示格式</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.ui" line="220"/>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorTakeRangeForm.cpp" line="250"/>
        <source>Take %1</source>
        <translation>片段 %1</translation>
    </message>
</context>
<context>
    <name>qtractorTempoAdjustForm</name>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="37"/>
        <source>Tempo Adjust</source>
        <translation>速度调整</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="54"/>
        <source>Metronome</source>
        <translation>节拍器</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="82"/>
        <source>Tempo/Time signature</source>
        <translation>速度/拍号</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="128"/>
        <source>&amp;Detect</source>
        <translation>检测(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="105"/>
        <source>T&amp;ap</source>
        <translation>点击(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="158"/>
        <source>Range</source>
        <translation>范围</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="170"/>
        <source>&amp;Start:</source>
        <translation>开始(&amp;S)：</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="186"/>
        <source>Range start</source>
        <translation>范围起点</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="228"/>
        <source>&amp;Beats:</source>
        <translation>拍数(&amp;B)：</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="289"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="294"/>
        <source>BBT</source>
        <translation>BBT</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="199"/>
        <source>&amp;Length:</source>
        <translation>长度(&amp;L)：</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="66"/>
        <source>&amp;Tempo:</source>
        <translation>速度(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="135"/>
        <source>R&amp;eset</source>
        <translation>重置(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="215"/>
        <source>Range length</source>
        <translation>范围长度</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="238"/>
        <source>Range beats</source>
        <translation>范围拍数</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="251"/>
        <source>A&amp;djust</source>
        <translation>调整(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="274"/>
        <source>Format</source>
        <translation>格式</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="280"/>
        <source>Time display format</source>
        <translation>时间显示格式</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.ui" line="284"/>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.cpp" line="883"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorTempoAdjustForm.cpp" line="884"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
</context>
<context>
    <name>qtractorThumbView</name>
    <message>
        <location filename="../qtractorThumbView.cpp" line="77"/>
        <source>Thumb view</source>
        <translation>缩略视图</translation>
    </message>
</context>
<context>
    <name>qtractorTimeScale</name>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="995"/>
        <source>C</source>
        <translation>C</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="995"/>
        <source>B#</source>
        <translation>B#</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="996"/>
        <source>C#</source>
        <translation>C#</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="996"/>
        <source>Db</source>
        <translation>Db</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="997"/>
        <source>D</source>
        <translation>D</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="998"/>
        <source>D#</source>
        <translation>D#</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="998"/>
        <source>Eb</source>
        <translation>Eb</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="999"/>
        <source>E</source>
        <translation>E</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="999"/>
        <source>Fb</source>
        <translation>Fb</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1000"/>
        <source>F</source>
        <translation>F</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1000"/>
        <source>E#</source>
        <translation>E#</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1001"/>
        <source>F#</source>
        <translation>F#</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1001"/>
        <source>Gb</source>
        <translation>Gb</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1002"/>
        <source>G</source>
        <translation>G</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1003"/>
        <source>G#</source>
        <translation>G#</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1003"/>
        <source>Ab</source>
        <translation>Ab</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1004"/>
        <source>A</source>
        <translation>A</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1005"/>
        <source>A#</source>
        <translation>A#</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1005"/>
        <source>Bb</source>
        <translation>Bb</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1006"/>
        <source>B</source>
        <translation>B</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScale.cpp" line="1006"/>
        <source>Cb</source>
        <translation>Cb</translation>
    </message>
</context>
<context>
    <name>qtractorTimeScaleForm</name>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="72"/>
        <source>Bar</source>
        <translation>小节</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="77"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="82"/>
        <source>Tempo</source>
        <translation>速度</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="122"/>
        <source>&amp;Bar:</source>
        <translation>小节(&amp;B)：</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="56"/>
        <source>Tempo map / Markers</source>
        <translation>速度图谱 / 标记</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="92"/>
        <source>Marker</source>
        <translation>标记</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="138"/>
        <source>Bar location</source>
        <translation>小节位置</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="160"/>
        <source>T&amp;ime:</source>
        <translation>时间(&amp;I)：</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="176"/>
        <source>Time/frame location</source>
        <translation>时间/帧位置</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="199"/>
        <source>&amp;Tempo:</source>
        <translation>速度(&amp;T)：</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="225"/>
        <source>T&amp;ap</source>
        <translation>点击(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="322"/>
        <source>Marker text</source>
        <translation>标记文本</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="338"/>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="335"/>
        <source>Marker color</source>
        <translation>标记颜色</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="37"/>
        <source>Tempo Map / Markers</source>
        <translation>速度图谱 / 标记</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="87"/>
        <source>Key</source>
        <translation>调性</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="218"/>
        <source>Tempo (BPM) / Time signature</source>
        <translation>速度 (BPM) / 拍号</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="248"/>
        <source>&amp;Key signature:</source>
        <translation>调号(&amp;K)：</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="261"/>
        <source>Key signature (accidentals)</source>
        <translation>调号 (升降号)</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="271"/>
        <source>Key signature (mode)</source>
        <translation>调号 (模式)</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="278"/>
        <source>-</source>
        <translation>-</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="283"/>
        <source>Major</source>
        <translation>大调</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="288"/>
        <source>Minor</source>
        <translation>小调</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="312"/>
        <source>&amp;Marker:</source>
        <translation>标记(&amp;M)：</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="364"/>
        <source>Tempo &amp;scale factor:</source>
        <translation>速度缩放系数(&amp;S)：</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="377"/>
        <source>Tempo scale factor</source>
        <translation>速度缩放系数</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="402"/>
        <source>App&amp;ly</source>
        <translation>应用(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="421"/>
        <source>Refresh tempo map</source>
        <translation>刷新速度图谱</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="424"/>
        <source>Re&amp;fresh</source>
        <translation>刷新(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="450"/>
        <source>Add node</source>
        <translation>添加节点</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="453"/>
        <location filename="../qtractorTimeScaleForm.cpp" line="1177"/>
        <source>&amp;Add</source>
        <translation>添加(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="463"/>
        <source>Update node</source>
        <translation>更新节点</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="466"/>
        <location filename="../qtractorTimeScaleForm.cpp" line="1182"/>
        <source>&amp;Update</source>
        <translation>更新(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="476"/>
        <source>Remove node</source>
        <translation>移除节点</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="479"/>
        <location filename="../qtractorTimeScaleForm.cpp" line="1187"/>
        <source>&amp;Remove</source>
        <translation>移除(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="489"/>
        <source>Close this dialog</source>
        <translation>关闭此对话框</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.ui" line="492"/>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.cpp" line="564"/>
        <location filename="../qtractorTimeScaleForm.cpp" line="835"/>
        <location filename="../qtractorTimeScaleForm.cpp" line="1042"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.cpp" line="565"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.cpp" line="836"/>
        <source>About to remove tempo node:

%1 (%2) %3  %4/%5

Are you sure?</source>
        <translation>即将删除速度节点：

%1 (%2) %3  %4/%5

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.cpp" line="1043"/>
        <source>Some settings have been changed.

Do you want to discard the changes?</source>
        <translation>某些设置已更改。

是否放弃这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.cpp" line="1066"/>
        <source>tempo factor</source>
        <translation>速度系数</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.cpp" line="1143"/>
        <source>Marker Color</source>
        <translation>标记颜色</translation>
    </message>
    <message>
        <location filename="../qtractorTimeScaleForm.cpp" line="1194"/>
        <source>&amp;Refresh</source>
        <translation>刷新(&amp;R)</translation>
    </message>
</context>
<context>
    <name>qtractorTimeSpinBox</name>
    <message>
        <location filename="../qtractorSpinBox.cpp" line="427"/>
        <source>&amp;Frames</source>
        <translation>帧(&amp;F)</translation>
    </message>
    <message>
        <location filename="../qtractorSpinBox.cpp" line="432"/>
        <source>&amp;Time</source>
        <translation>时间(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorSpinBox.cpp" line="437"/>
        <source>&amp;BBT</source>
        <translation>BBT(&amp;B)</translation>
    </message>
</context>
<context>
    <name>qtractorTrackForm</name>
    <message>
        <location filename="../qtractorTrackForm.ui" line="37"/>
        <location filename="../qtractorTrackForm.ui" line="50"/>
        <source>Track</source>
        <translation>轨道</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="58"/>
        <source>&amp;Name:</source>
        <translation>名称(&amp;N)：</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="80"/>
        <source>Track name description</source>
        <translation>轨道名称描述</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="102"/>
        <source>Track icon</source>
        <translation>轨道图标</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="135"/>
        <source>Type</source>
        <translation>类型</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="147"/>
        <source>Audio track type</source>
        <translation>音频轨道类型</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="150"/>
        <source>&amp;Audio</source>
        <translation>音频(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="157"/>
        <source>MIDI track type</source>
        <translation>MIDI 轨道类型</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="160"/>
        <source>&amp;MIDI</source>
        <translation>MIDI(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="170"/>
        <source>Input / Output</source>
        <translation>输入 / 输出</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="194"/>
        <source>Input bus name</source>
        <translation>输入总线名称</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="213"/>
        <source>Output bus name</source>
        <translation>输出总线名称</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="235"/>
        <source>Manage buses</source>
        <translation>管理总线</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="238"/>
        <location filename="../qtractorTrackForm.ui" line="446"/>
        <location filename="../qtractorTrackForm.ui" line="519"/>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="250"/>
        <source>MIDI / Instrument</source>
        <translation>MIDI / 乐器</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="367"/>
        <source>&amp;Program:</source>
        <translation>音色(&amp;P)：</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="347"/>
        <source>&amp;Bank:</source>
        <translation>音色库(&amp;B)：</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="311"/>
        <source>Bank &amp;Select Method:</source>
        <translation>音色库选择方式(&amp;S)：</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="265"/>
        <source>&amp;Omni</source>
        <translation>全通道(&amp;O)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="262"/>
        <source>MIDI Omni: Capture All Channels</source>
        <translation>MIDI 全通道：捕获所有通道</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="272"/>
        <source>&amp;Channel:</source>
        <translation>通道(&amp;C)：</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="291"/>
        <source>MIDI Channel (1-16)</source>
        <translation>MIDI 通道 (1-16)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="304"/>
        <source>MIDI Patch: Instrument</source>
        <translation>MIDI 音色：乐器</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="330"/>
        <source>MIDI Patch: Bank Select Method</source>
        <translation>MIDI 音色：音色库选择方式</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="337"/>
        <source>MIDI Patch: Drum Mode</source>
        <translation>MIDI 音色：鼓模式</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="357"/>
        <source>MIDI Patch: Bank</source>
        <translation>MIDI 音色：音色库</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="377"/>
        <source>MIDI Patch: Program</source>
        <translation>MIDI 音色：音色</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="390"/>
        <source>View / Colors</source>
        <translation>视图 / 颜色</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="402"/>
        <source>&amp;Foreground:</source>
        <translation>前景色(&amp;F)：</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="418"/>
        <source>Foreground color</source>
        <translation>前景色</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="443"/>
        <source>Select custom track foreground color</source>
        <translation>选择自定义轨道前景色</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="472"/>
        <source>Bac&amp;kground:</source>
        <translation>背景色(&amp;K)：</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="491"/>
        <source>Background color</source>
        <translation>背景色</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="516"/>
        <source>Select custom track background color</source>
        <translation>选择自定义轨道背景色</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="529"/>
        <source>Auto</source>
        <translation>自动</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="543"/>
        <source>Plugins</source>
        <translation>插件</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="552"/>
        <source>Track plugins</source>
        <translation>轨道插件</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="567"/>
        <source>Add plugin</source>
        <translation>添加插件</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="570"/>
        <source>&amp;Add...</source>
        <translation>添加(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="589"/>
        <source>Remove plugin</source>
        <translation>移除插件</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="592"/>
        <source>&amp;Remove</source>
        <translation>移除(&amp;R)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="624"/>
        <source>Move plugin up</source>
        <translation>上移插件</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="627"/>
        <source>&amp;Up</source>
        <translation>上移(&amp;U)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="646"/>
        <source>Move plugin down</source>
        <translation>下移插件</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="649"/>
        <source>&amp;Down</source>
        <translation>下移(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="664"/>
        <source>Whether to enable plugin latency/delay compensation</source>
        <translation>是否启用插件延迟补偿</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="667"/>
        <source>&amp;Latency compensation</source>
        <translation>延迟补偿(&amp;L)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="698"/>
        <source>Current total latency</source>
        <translation>当前总延迟</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="147"/>
        <source>Normal</source>
        <translation>常规</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="148"/>
        <source>Bank MSB</source>
        <translation>音色库 MSB</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="149"/>
        <source>Bank LSB</source>
        <translation>音色库 LSB</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="150"/>
        <source>Patch</source>
        <translation>音色</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="188"/>
        <source>Custom &amp;Icon...</source>
        <translation>自定义图标(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.ui" line="340"/>
        <location filename="../qtractorTrackForm.cpp" line="190"/>
        <source>&amp;Drums</source>
        <translation>鼓(&amp;D)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="191"/>
        <source>Drum &amp;Kit</source>
        <translation>架子鼓(&amp;K)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="192"/>
        <source>&amp;Bass</source>
        <translation>贝斯(&amp;B)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="193"/>
        <source>A&amp;coustic Bass</source>
        <translation>原声贝斯(&amp;C)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="194"/>
        <source>&amp;Guitar</source>
        <translation>吉他(&amp;G)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="195"/>
        <source>&amp;Electric Guitar</source>
        <translation>电吉他(&amp;E)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="196"/>
        <source>&amp;Piano</source>
        <translation>钢琴(&amp;P)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="197"/>
        <source>&amp;Acoustic Piano</source>
        <translation>原声钢琴(&amp;A)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="198"/>
        <source>&amp;Microphone</source>
        <translation>麦克风(&amp;M)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="199"/>
        <source>Vi&amp;ntage Microphone</source>
        <translation>复古麦克风(&amp;N)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="200"/>
        <source>&amp;Speaker</source>
        <translation>扬声器(&amp;S)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="201"/>
        <source>&amp;Trumpet</source>
        <translation>小号(&amp;T)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="202"/>
        <source>&amp;Violin</source>
        <translation>小提琴(&amp;V)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="516"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="517"/>
        <source>Some settings have been changed.

Do you want to apply the changes?</source>
        <translation>某些设置已更改。

是否应用这些更改？</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="666"/>
        <source>(No instrument)</source>
        <translation>(无乐器)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="1702"/>
        <source>%1 ms (%2 frames)</source>
        <translation>%1 毫秒 (%2 帧)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="1706"/>
        <source>(no latency)</source>
        <translation>(无延迟)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="204"/>
        <location filename="../qtractorTrackForm.cpp" line="874"/>
        <location filename="../qtractorTrackForm.cpp" line="988"/>
        <source>(None)</source>
        <translation>(无)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="1255"/>
        <source>Image files (%1)</source>
        <translation>图像文件 (%1)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="1256"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="1252"/>
        <source>Track Icon</source>
        <translation>轨道图标</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="1569"/>
        <source>Foreground Color</source>
        <translation>前景色</translation>
    </message>
    <message>
        <location filename="../qtractorTrackForm.cpp" line="1595"/>
        <source>Background Color</source>
        <translation>背景色</translation>
    </message>
</context>
<context>
    <name>qtractorTrackList</name>
    <message>
        <location filename="../qtractorTrackList.cpp" line="177"/>
        <source>Nr</source>
        <translation>编号</translation>
    </message>
    <message>
        <location filename="../qtractorTrackList.cpp" line="178"/>
        <source>Track Name</source>
        <translation>轨道名称</translation>
    </message>
    <message>
        <location filename="../qtractorTrackList.cpp" line="179"/>
        <source>Bus</source>
        <translation>总线</translation>
    </message>
    <message>
        <location filename="../qtractorTrackList.cpp" line="180"/>
        <source>Ch</source>
        <translation>声道</translation>
    </message>
    <message>
        <location filename="../qtractorTrackList.cpp" line="181"/>
        <source>Patch</source>
        <translation>音色</translation>
    </message>
    <message>
        <location filename="../qtractorTrackList.cpp" line="182"/>
        <source>Instrument</source>
        <translation>乐器</translation>
    </message>
</context>
<context>
    <name>qtractorTrackTime</name>
    <message>
        <location filename="../qtractorTrackTime.cpp" line="914"/>
        <source>Play-head</source>
        <translation>播放头</translation>
    </message>
    <message>
        <location filename="../qtractorTrackTime.cpp" line="917"/>
        <source>Edit-head</source>
        <translation>编辑头</translation>
    </message>
    <message>
        <location filename="../qtractorTrackTime.cpp" line="920"/>
        <source>Edit-tail</source>
        <translation>编辑尾</translation>
    </message>
    <message>
        <location filename="../qtractorTrackTime.cpp" line="923"/>
        <source>Loop-start</source>
        <translation>循环起点</translation>
    </message>
    <message>
        <location filename="../qtractorTrackTime.cpp" line="926"/>
        <source>Loop-end</source>
        <translation>循环终点</translation>
    </message>
    <message>
        <location filename="../qtractorTrackTime.cpp" line="929"/>
        <source>Punch-in</source>
        <translation>插入录音入点</translation>
    </message>
    <message>
        <location filename="../qtractorTrackTime.cpp" line="932"/>
        <source>Punch-out</source>
        <translation>插入录音出点</translation>
    </message>
    <message>
        <location filename="../qtractorTrackTime.cpp" line="967"/>
        <source>Start:	%1
End:	%2
Length:	%3</source>
        <translation>开始：	%1
结束：	%2
长度：	%3</translation>
    </message>
</context>
<context>
    <name>qtractorTrackView</name>
    <message>
        <location filename="../qtractorTrackView.cpp" line="150"/>
        <source>Zoom in (horizontal)</source>
        <translation>放大 (水平)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="151"/>
        <source>Zoom out (horizontal)</source>
        <translation>缩小 (水平)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="152"/>
        <source>Zoom in (vertical)</source>
        <translation>放大 (垂直)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="153"/>
        <source>Zoom out (vertical)</source>
        <translation>缩小 (垂直)</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="154"/>
        <source>Zoom reset</source>
        <translation>重置缩放</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="1693"/>
        <source>add clip</source>
        <translation>添加剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="3250"/>
        <source>Start:	%1
End:	%2
Length:	%3</source>
        <translation>开始：	%1
结束：	%2
长度：	%3</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="3541"/>
        <source>clip %1</source>
        <translation>剪辑 %1</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="3542"/>
        <source>fade-in</source>
        <translation>淡入</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="3542"/>
        <source>fade-out</source>
        <translation>淡出</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="3672"/>
        <source>clip stretch</source>
        <translation>剪辑拉伸</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="3672"/>
        <source>clip resize</source>
        <translation>剪辑调整</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="3757"/>
        <location filename="../qtractorTrackView.cpp" line="3865"/>
        <source>clip repeat</source>
        <translation>剪辑重复</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="4780"/>
        <source>%1 automation</source>
        <translation>%1 自动化</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="4853"/>
        <source>%1 clip</source>
        <translation>%1 剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="5503"/>
        <source>move automation</source>
        <translation>移动自动化</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="5590"/>
        <source>paste automation</source>
        <translation>粘贴自动化</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="4784"/>
        <location filename="../qtractorTrackView.cpp" line="4857"/>
        <source>cut</source>
        <translation>剪切</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="4787"/>
        <location filename="../qtractorTrackView.cpp" line="4860"/>
        <source>delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="4863"/>
        <source>split</source>
        <translation>分割</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="5225"/>
        <source>move clip</source>
        <translation>移动剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorTrackView.cpp" line="5360"/>
        <source>paste clip</source>
        <translation>粘贴剪辑</translation>
    </message>
</context>
<context>
    <name>qtractorTracks</name>
    <message>
        <location filename="../qtractorTracks.cpp" line="109"/>
        <source>Tracks</source>
        <translation>轨道</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="543"/>
        <source>new clip</source>
        <translation>新建剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="585"/>
        <source>mute clip</source>
        <translation>静音剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="697"/>
        <source>split clip</source>
        <translation>分割剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="787"/>
        <source>clip normalize</source>
        <translation>剪辑标准化</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="906"/>
        <source>quantize</source>
        <translation>量化</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="907"/>
        <source>transpose</source>
        <translation>移调</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="908"/>
        <source>normalize</source>
        <translation>标准化</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="909"/>
        <source>randomize</source>
        <translation>随机化</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="910"/>
        <source>resize</source>
        <translation>调整</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="911"/>
        <source>rescale</source>
        <translation>缩放</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="912"/>
        <source>timeshift</source>
        <translation>时间偏移</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1055"/>
        <source>clip import</source>
        <translation>剪辑导入</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1082"/>
        <location filename="../qtractorTracks.cpp" line="3146"/>
        <source>Audio file import &quot;%1&quot; on %2 %3.
</source>
        <translation>音频文件导入 &quot;%1&quot; 到 %2 %3。
</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1087"/>
        <location filename="../qtractorTracks.cpp" line="3151"/>
        <source>Audio file import: &quot;%1&quot;.</source>
        <translation>音频文件导入：&quot;%1&quot;。</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1117"/>
        <location filename="../qtractorTracks.cpp" line="3000"/>
        <source>MIDI file import &quot;%1&quot; track-channel %2 on %3 %4.
</source>
        <translation>MIDI 文件导入 &quot;%1&quot; 轨道-通道 %2 到 %3 %4。
</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1123"/>
        <location filename="../qtractorTracks.cpp" line="3006"/>
        <source>MIDI file import: &quot;%1&quot;, track-channel: %2.</source>
        <translation>MIDI 文件导入：&quot;%1&quot;，轨道-通道：%2。</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1158"/>
        <source>clip merge</source>
        <translation>剪辑合并</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1250"/>
        <location filename="../qtractorTracks.cpp" line="1549"/>
        <source>Merge/Export</source>
        <translation>合并/导出</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1263"/>
        <source>Merge/Export Audio Clip</source>
        <translation>合并/导出音频剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1328"/>
        <source>Audio clip merge/export: &quot;%1&quot; started...</source>
        <translation>音频剪辑合并/导出：&quot;%1&quot; 已开始...</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1476"/>
        <source>Audio clip merge/export: &quot;%1&quot; complete.</source>
        <translation>音频剪辑合并/导出：&quot;%1&quot; 完成。</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1562"/>
        <source>Merge/Export MIDI Clip</source>
        <translation>合并/导出 MIDI 剪辑</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1628"/>
        <source>MIDI clip merge/export: &quot;%1&quot; started...</source>
        <translation>MIDI 剪辑合并/导出：&quot;%1&quot; 已开始...</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1766"/>
        <source>MIDI clip merge/export: &quot;%1&quot; complete.</source>
        <translation>MIDI 剪辑合并/导出：&quot;%1&quot; 完成。</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1939"/>
        <source>clip cross-fade</source>
        <translation>剪辑交叉淡化</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="2216"/>
        <source>Insert Range</source>
        <translation>插入范围</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="2237"/>
        <source>insert track range</source>
        <translation>插入轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="2441"/>
        <source>Remove Range</source>
        <translation>移除范围</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="2236"/>
        <source>insert range</source>
        <translation>插入范围</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="913"/>
        <source>tempo ramp</source>
        <translation>速度渐变</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1564"/>
        <source>MIDI files (*.mid *.smf *.midi)</source>
        <translation>MIDI 文件 (*.mid *.smf *.midi)</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="1565"/>
        <source>All files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="2461"/>
        <source>remove range</source>
        <translation>移除范围</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="2462"/>
        <source>remove track range</source>
        <translation>移除轨道范围</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="2759"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="2760"/>
        <source>About to remove track:

&quot;%1&quot;

Are you sure?</source>
        <translation>即将删除轨道：

&quot;%1&quot;

是否确认？</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="3257"/>
        <source>MIDI file import &quot;%1&quot; on %2 %3.
</source>
        <translation>MIDI 文件导入 &quot;%1&quot; 到 %2 %3。
</translation>
    </message>
    <message>
        <location filename="../qtractorTracks.cpp" line="3262"/>
        <source>MIDI file import: &quot;%1&quot;.</source>
        <translation>MIDI 文件导入：&quot;%1&quot;。</translation>
    </message>
</context>
</TS>
