===============================================================
===============================================================

STL WebMail Server ver 1.4.1
===============================================================
   
    STL
    Via D'Azeglio, 8
    20052 Monza Milano Italy
    +39 39 2329069
    Web: http://www.tresoldi.net
    Email: info@tresoldi.net



DEMO ON LINE
===============================================================
	A demo version of STL WebMail Server can be tried on 
	line at the URL: 
	http://webmail.tresoldi.net
	http://www.webmailserver.it



SYSTEM REQUIREMENTS
===============================================================
	-	Pentium II 350 MHz CPU
	-	64 Mb RAM or more
	-	Microsoft Windows NT/2000 Server
	-	Microsoft Internet Information Server 4 or more with 
		Microsoft SMPT always active
	-	Microsoft MDAC 2.1 or more


STL WebMail Server INSTALLATION
===============================================================
	Execute STL WebMail Server Installation software


STL WebMail Server Configuration
===============================================================
	Launch the configuration program: 
	Start menu->STL WebMail->STL WebMail Config

	After you have choosen your language you have to select which 
	version of STL WebMail to Install:
		- shareware version
		- licensed  version
	and then you have to insert the requested data.

	Requested data are:
		- Domain name related to STL WebMail Server
		  (eg. www.mywebmail.it)		
		- IP address of the server where STL WebMail Server is 
		  installed 
	Default settings are: 
		- IP Address: "All Unsigned"
		- Port: 80
	However is possible to change these settings from IIS MMC console
 	
	ATTENTION: If you don't know what these settings are, we advise you
		   not to cange them



IMPORTANT
===============================================================

	DNS
---------------------------------------------------------------
		REMEMBER TO CONFIGURE YOUR DNS WITH INSERTED DOMAIN DATA AND 
		WEB SERVER IP ADDRESS.

	HOSTS FILE
---------------------------------------------------------------
	If you don't have a DNS server you can use or test the software configuring the
	HOSTS file.
	The HOSTS file 's path name is:
		C:\\WINNT\SYSTEM32\DRIVERS\ETC\HOSTS

	Insert into the hosts file a row related to STL WebMail Server with this format:

		IP ADDRESS	DOMAIN

	Example of a row to insert into the hosts file: 
		127.0.0.1       www.mywebmail.it

	Attention if you set up the default value "All Unsigned" during configuration procedure
	you have to specify the IP Address of the Web Server where is installed STL WebMail 
	Server.


				*** STL WebMail Server USE ***
		===================================================================



	Use your internet browser to enter the program typing the URL indicated during 
	installation.
	(eg. www.mywebmail.it)
	Access the login form inserting these information:
		-	User: 	  administrator
		-	Password: stlwebmail

	Select Admin link and click on "Enter" button.
	It's advised to change your username and password when you enter WebMail the first time.



=================================================================================================


    STL
    Via D'Azeglio, 8
    20052 Monza Milano Italy
    +39 39 2329069
    Web: http://www.tresoldi.net
    Email: info@tresoldi.net




===============================================================
===============================================================

STL WebMail Server ver 1.4.1
===============================================================
   
    STL
    Via D'Azeglio, 8
    20052 Monza Milano Italy
    +39 39 2329069
    Web: http://www.tresoldi.net
    Email: info@tresoldi.net



DEMO ON LINE
===============================================================
	Una versione demo del sistema pu essere provata on line 
	all'URL 
	http://webmail.tresoldi.net
	http://www.webmailserver.it



REQUISITI DI SISTEMA
===============================================================
	-	Pentium II 350 o superiore
	-	64M RAM o superiore
	-	Microsoft Windows NT/2000 Server
	-	Microsoft Internet Information Server 4 o superiore con 
		Microsoft SMTP service attivo
	-	Microsoft Mdac 2.1 o superiore


INSTALLAZIONE STL WebMail Server.
===============================================================
	Eseguire il programma di installazione del software STL Web Mail .

CONFIGURAZIONE STL WebMail Server.
===============================================================
	Selezionare dal men di avvio il programma di configurazione 
	STLWebmail -> STLWebMail install.
	Dopo aver selezionato la lingua ed aver scelto il tipo di versione: 
	  -	versione Shareware o 
	  -	versione con licenza
	inserire i dati per la configurazione.

	I dati necessari sono :
		- Nome di Dominio al quale deve rispondere STL Web Mail   
		  (es. www.miowebmail.it)
		- Indirizzo IP del server sul quale viene installato il software. 

	Di default le impostazioni dell' IP Address sono 'ALL UNSIGNED'	Port 80.
	E' comunque possibile modificare queste impostazioni in un secondo tempo dalla 
	MMC dell' IIS.

	N.B. Se non sai cosa indicano questi parametri ti consigliamo di non modificarli.





IMPORTANTE
===============================================================

   DNS
---------------------------------------------------------------
	RICORDARSI DI CONFIGURARE IL PROPRIO DNS CON I DATI DEL DOMINIO INSERITO E 
	L'IP ADDRESS DEL WEB SERVER. 


HOST FILE
---------------------------------------------------------------
	Se non disponi di un DNS server puoi usare o testare il programma configurando 
	il file HOST.
	Il percorso del file di host :

	C:\WINNT\system32\drivers\etc\hosts

	Inserire nel file hosts una nuova riga relativa a STL Web Mail  con il 
	seguente formato 

	Indirizzo IP 	Dominio

	Es. riga da inserire nel file host 
	127.0.0.1       www.miowebmail.it

	Attenzione se  stato impostato in fase di configurazione il valore 'All unsigned' 
	(default)  necessario specificare comunque l'indirizzo IP del Web Server 
	sul quale  stato installato STL Web Mail Server.




			*** UTILIZZO DEL PROGRAMMA STL WEBMAIL Server ***
		===================================================================
	Utilizzare il navigatore internet per accedere al programma digitando l'URL indicato
	al momento dell'installazione (es. www.miowebmail.it)

	Accedere al form di log in, inserendo i seguenti parametri:
	  -	User: administrator
	  -	Password: stlwebmail

	Selezionare il link 'Admin', e selezionare il tasto 'Accedi'.
	E' consigliato al primo accesso modificare il proprio username e la password.

=================================================================================================


    STL
    Via D'Azeglio, 8
    20052 Monza Milano Italy
    +39 39 2329069
    Web: http://www.tresoldi.net
    Email: info@tresoldi.net

