/*
 * Copyright (C) 1984-2026  Mark Nudelman
 *
 * You may distribute under the terms of either the GNU General Public
 * License or the Less License, as specified in the README file.
 *
 * For more information, see the README file.
 */


/*
 * Routines to search a file for a pattern.
 */

#include "less.h"
#include "position.h"
#include "charset.h"

#define MINPOS(a,b)     (((a) < (b)) ? (a) : (b))
#define MAXPOS(a,b)     (((a) > (b)) ? (a) : (b))

extern int sigs;
extern int how_search;
extern int caseless;
extern int linenums;
extern int jump_sline;
extern int bs_mode;
extern int proc_backspace;
extern int proc_return;
extern int ctldisp;
extern int status_col;
extern int status_line;
extern int hilite_target;
extern void *ml_search;
extern POSITION start_attnpos;
extern POSITION end_attnpos;
extern int utf_mode;
extern int sc_width;
extern int sc_height;
extern int hshift;
extern int match_shift;
extern int nosearch_header_lines;
extern int nosearch_header_cols;
extern int header_lines;
extern int header_cols;
extern LWCHAR rscroll_char;
#if HILITE_SEARCH
extern int hilite_search;
extern lbool squished;
extern int can_goto_line;
static lbool hide_hilite;
static POSITION prep_startpos;
static POSITION prep_endpos;
public POSITION header_start_pos = NULL_POSITION;
static POSITION header_end_pos;
public lbool search_wrapped = FALSE;
public POSITION search_incr_start = NULL_POSITION;
#if OSC8_LINK
public POSITION osc8_linepos = NULL_POSITION;
public POSITION osc8_match_start = NULL_POSITION;
public POSITION osc8_match_end = NULL_POSITION;
public POSITION osc8_params_start = NULL_POSITION;
public POSITION osc8_params_end = NULL_POSITION;
public POSITION osc8_uri_start = NULL_POSITION;
public POSITION osc8_uri_end = NULL_POSITION;
public POSITION osc8_text_start = NULL_POSITION;
public POSITION osc8_text_end = NULL_POSITION;
char *osc8_uri = NULL;
constant char *osc8_search_param = NULL;
#endif

/*
 * Structures for maintaining a set of ranges for hilites and filtered-out
 * lines. Each range is stored as a node within a red-black tree, and we
 * try to extend existing ranges (without creating overlaps) rather than
 * create new nodes if possible. We remember the last node found by a
 * search for constant-time lookup if the next search is near enough to
 * the previous. To aid that, we overlay a secondary doubly-linked list
 * on top of the red-black tree so we can find the preceding/succeeding
 * nodes also in constant time.
 *
 * Each node is allocated from a series of pools, each pool double the size
 * of the previous (for amortised constant time allocation). Since our only
 * tree operations are clear and node insertion, not node removal, we don't
 * need to maintain a usage bitmap or freelist and can just return nodes
 * from the pool in-order until capacity is reached.
 */
struct hilite
{
	POSITION hl_startpos;
	POSITION hl_endpos;
	int hl_attr;
};
struct hilite_node
{
	struct hilite_node *parent;
	struct hilite_node *left;
	struct hilite_node *right;
	struct hilite_node *prev;
	struct hilite_node *next;
	int red;
	struct hilite r;
};
struct hilite_storage
{
	size_t capacity;
	size_t used;
	struct hilite_storage *next;
	struct hilite_node *nodes;
};
struct hilite_tree
{
	struct hilite_storage *first;
	struct hilite_storage *current;
	struct hilite_node *root;
	struct hilite_node *lookaside;
};
#define HILITE_INITIALIZER() { NULL, NULL, NULL, NULL }
#define HILITE_LOOKASIDE_STEPS 2

static struct hilite_tree hilite_anchor = HILITE_INITIALIZER();
static struct hilite_tree filter_anchor = HILITE_INITIALIZER();
static struct pattern_info *filter_infos = NULL;

#endif

/*
 * These are the static variables that represent the "remembered"
 * search pattern and filter pattern.
 */
struct pattern_info {
	PATTERN_TYPE compiled;
	char* text;
	int search_type;
	lbool is_ucase_pattern;
	struct pattern_info *next;
};

#if NO_REGEX
#define info_compiled(info) ((void*)0)
#else
#define info_compiled(info) ((info)->compiled)
#endif
	
static struct pattern_info search_info;
public int is_caseless;

/*
 * Are there any uppercase letters in this string?
 */
static lbool is_ucase(constant char *str)
{
	constant char *str_end = str + strlen(str);
	LWCHAR ch;

	while (str < str_end)
	{
		ch = step_charc(&str, +1, str_end);
		if (IS_UPPER(ch))
			return (TRUE);
	}
	return (FALSE);
}

/*
 * Discard a saved pattern.
 */
static void clear_pattern(struct pattern_info *info)
{
	if (info->text != NULL)
		free(info->text);
	info->text = NULL;
#if !NO_REGEX
	uncompile_pattern(&info->compiled);
#endif
}

/*
 * Compile and save a search pattern.
 */
static int set_pattern(struct pattern_info *info, constant char *pattern, int search_type, int show_error)
{
	/*
	 * Ignore case if -I is set OR
	 * -i is set AND the pattern is all lowercase.
	 */
	info->is_ucase_pattern = (pattern == NULL) ? FALSE : is_ucase(pattern);
	is_caseless = (info->is_ucase_pattern && caseless != OPT_ONPLUS) ? 0 : caseless;
#if !NO_REGEX
	if (pattern == NULL)
		SET_NULL_PATTERN(info->compiled);
	else if (compile_pattern(pattern, search_type, show_error, &info->compiled) < 0)
		return -1;
#endif
	/* Pattern compiled successfully; save the text too. */
	if (info->text != NULL)
		free(info->text);
	info->text = NULL;
	if (pattern != NULL)
	{
		info->text = (char *) ecalloc(1, strlen(pattern)+1);
		strcpy(info->text, pattern);
	}
	info->search_type = search_type;
	return 0;
}

/*
 * Initialize saved pattern to nothing.
 */
static void init_pattern(struct pattern_info *info)
{
	SET_NULL_PATTERN(info->compiled);
	info->text = NULL;
	info->search_type = 0;
	info->next = NULL;
}

/*
 * Initialize search variables.
 */
public void init_search(void)
{
	init_pattern(&search_info);
}

/*
 * Determine which text conversions to perform before pattern matching.
 */
public int get_cvt_ops(int search_type)
{
	int ops = 0;

#if RE_HANDLES_CASELESS
	if (is_caseless && (search_type & SRCH_NO_REGEX))
		ops |= CVT_TO_LC;
#else
	if (is_caseless)
		ops |= CVT_TO_LC;
#endif
	if (proc_backspace == OPT_ON || (bs_mode == BS_SPECIAL && proc_backspace == OPT_OFF))
		ops |= CVT_BS;
	if (proc_return == OPT_ON || (bs_mode != BS_CONTROL && proc_backspace == OPT_OFF))
		ops |= CVT_CRLF;
	if (ctldisp == OPT_ONPLUS)
		ops |= CVT_ANSI;
	return (ops);
}

/*
 * Is there a previous (remembered) search pattern?
 */
static lbool prev_pattern(struct pattern_info *info)
{
#if !NO_REGEX
	if ((info->search_type & SRCH_NO_REGEX) == 0)
		return (!is_null_pattern(info->compiled));
#endif
	return (info->text != NULL);
}

/*
 * Return text of previous search pattern.
 */
public constant char* prev_pattern_text(void)
{
	return search_info.text;
}

#if HILITE_SEARCH
/*
 * Repaint the hilites currently displayed on the screen.
 * Repaint each line which contains highlighted text.
 * If on==0, force all hilites off.
 */
public void repaint_hilite(lbool on)
{
	int sindex;
	POSITION pos;
	lbool save_hide_hilite;

	if (squished)
		repaint();

	save_hide_hilite = hide_hilite;
	if (!on)
	{
		if (hide_hilite)
			return;
		hide_hilite = TRUE;
	}

	if (!can_goto_line)
	{
		repaint();
		hide_hilite = save_hide_hilite;
		return;
	}

	for (sindex = TOP;  sindex < TOP + sc_height-1;  sindex++)
	{
		pos = position(sindex);
		if (pos == NULL_POSITION)
			continue;
		(void) forw_line(pos, NULL, NULL);
		goto_line(sindex);
		clear_eol();
		put_line(FALSE);
	}
	overlay_header();
	lower_left();
	hide_hilite = save_hide_hilite;
}
#endif

/*
 * Redraw the jump target line with the attn hilite on or off.
 */
public void draw_target_attn(lbool hilite)
{
	int sindex;
	POSITION pos;

	if (!can_goto_line) /* {{ Are there any such terminals any more? }} */
		return;
	if (squished)
		return;
	sindex = sindex_from_sline(jump_sline);
	pos = position(sindex);
	forw_line_seg(pos, chop_line() || hshift > 0, TRUE, FALSE, hilite && status_line, FALSE, NULL, NULL);
	goto_line(sindex);
	clear_eol();
	put_line_hilite(TRUE, hilite);
	lower_left();
}

/*
 * Clear the attn hilite.
 */
public void clear_attn(void)
{
#if HILITE_SEARCH
	int sindex;
	POSITION old_start_attnpos;
	POSITION old_end_attnpos;
	POSITION pos;
	POSITION epos;
	int moved = 0;

	if (hilite_target)
		draw_target_attn(FALSE);

	if (start_attnpos == NULL_POSITION)
		return;
	old_start_attnpos = start_attnpos;
	old_end_attnpos = end_attnpos;
	start_attnpos = end_attnpos = NULL_POSITION;

	if (!can_goto_line)
	{
		repaint();
		return;
	}
	if (squished)
		repaint();

	for (sindex = TOP;  sindex < TOP + sc_height-1;  sindex++)
	{
		pos = position(sindex);
		if (pos == NULL_POSITION)
			continue;
		epos = position(sindex+1);
		if (pos <= old_end_attnpos &&
		     (epos == NULL_POSITION || epos > old_start_attnpos))
		{
			(void) forw_line(pos, NULL, NULL);
			goto_line(sindex);
			clear_eol();
			put_line(FALSE);
			moved = 1;
		}
	}
	if (overlay_header())
		moved = 1;
	if (moved)
		lower_left();
#endif
}

/*
 * Toggle or clear search string highlighting.
 */
public void undo_search(lbool clear)
{
#if HILITE_SEARCH
	lbool osc8_active = undo_osc8();
	lbool has_pattern = prev_pattern(&search_info);
	if (clear)
	{
		clear_pattern(&search_info);
		clr_hilite();
	} else
	{
		if (has_pattern)
			hide_hilite = !hide_hilite;
		else if (!osc8_active)
			error("No previous regular expression", NULL_PARG);
	}
	repaint_hilite(TRUE);
#else
	undo_osc8();
	clear_pattern(&search_info);
#endif
}

/*
 */
public lbool undo_osc8(void)
{
	lbool was_active = FALSE;
#if OSC8_LINK
	was_active = (osc8_linepos != NULL_POSITION);
	osc8_linepos = NULL_POSITION;
#endif
	return was_active;
}

#if HILITE_SEARCH
/*
 * Clear the hilite list.
 */
public void clr_hlist(struct hilite_tree *anchor)
{
	struct hilite_storage *hls;
	struct hilite_storage *nexthls;

	for (hls = anchor->first;  hls != NULL;  hls = nexthls)
	{
		nexthls = hls->next;
		free((void*)hls->nodes);
		free((void*)hls);
	}
	anchor->first = NULL;
	anchor->current = NULL;
	anchor->root = NULL;

	anchor->lookaside = NULL;

	prep_startpos = prep_endpos = NULL_POSITION;
}

public void clr_hilite(void)
{
	clr_hlist(&hilite_anchor);
}

public void clr_filter(void)
{
	clr_hlist(&filter_anchor);
}

/*
 * Find the node covering pos, or the node after it if no node covers it,
 * or return NULL if pos is after the last range. Remember the found node,
 * to speed up subsequent searches for the same or similar positions (if
 * we return NULL, remember the last node.)
 */
static struct hilite_node* hlist_find(struct hilite_tree *anchor, POSITION pos)
{
	struct hilite_node *n, *m;

	if (anchor->lookaside)
	{
		int steps = 0;
		int hit = 0;

		n = anchor->lookaside;

		for (;;)
		{
			if (pos < n->r.hl_endpos)
			{
				if (n->prev == NULL || pos >= n->prev->r.hl_endpos)
				{
					hit = 1;
					break;
				}
			} else if (n->next == NULL)
			{
				n = NULL;
				hit = 1;
				break;
			}

			/*
			 * If we don't find the right node within a small
			 * distance, don't keep doing a linear search!
			 */
			if (steps >= HILITE_LOOKASIDE_STEPS)
				break;
			steps++;

			if (pos < n->r.hl_endpos)
				anchor->lookaside = n = n->prev;
			else
				anchor->lookaside = n = n->next;
		}

		if (hit)
			return n;
	}

	n = anchor->root;
	m = NULL;

	while (n != NULL)
	{
		if (pos < n->r.hl_startpos)
		{
			if (n->left != NULL)
			{
				m = n;
				n = n->left;
				continue;
			}
			break;
		}
		if (pos >= n->r.hl_endpos)
		{
			if (n->right != NULL)
			{
				n = n->right;
				continue;
			}
			if (m != NULL)
			{
				n = m;
			} else
			{
				m = n;
				n = NULL;
			}
		}
		break;
	}

	if (n != NULL)
		anchor->lookaside = n;
	else if (m != NULL)
		anchor->lookaside = m;

	return n;
}

/*
 * Should any characters in a specified range be highlighted?
 */
static int hilited_range_attr(POSITION pos, POSITION epos)
{
	struct hilite_node *n = hlist_find(&hilite_anchor, pos);
	if (n == NULL)
		return 0;
	if (epos != NULL_POSITION && epos <= n->r.hl_startpos)
		return 0;
	return n->r.hl_attr;
}

/*
 * Set header parameters.
 */
public void set_header(POSITION pos)
{
	header_start_pos = (header_lines == 0) ? NULL_POSITION : pos;
	if (header_start_pos != NULL_POSITION)
	{
		int ln;
		for (ln = 0; ln < header_lines; ++ln)
		{
			pos = forw_raw_line(pos, NULL, NULL);
			if (pos == NULL_POSITION) break;
		}
		header_end_pos = pos;
	}
}

/*
 * Is a position within the header lines?
 */
static lbool pos_in_header(POSITION pos)
{
	return (header_start_pos != NULL_POSITION &&
	        pos >= header_start_pos && pos < header_end_pos);
}

/* 
 * Is a line "filtered" -- that is, should it be hidden?
 */
public lbool is_filtered(POSITION pos)
{
	struct hilite_node *n;

	if (!is_filtering())
		return (FALSE);
	if (pos_in_header(pos))
		return (FALSE);
	n = hlist_find(&filter_anchor, pos);
	return (n != NULL && pos >= n->r.hl_startpos);
}

/*
 * If pos is hidden, return the next position which isn't, otherwise
 * just return pos.
 */
public POSITION next_unfiltered(POSITION pos)
{
	if (!is_filtering())
		return (pos);
	if (pos_in_header(pos))
		return (pos);
	flush();
	while (pos != NULL_POSITION)
	{
		prep_hilite(pos, NULL_POSITION, 1);
		if (!is_filtered(pos))
			break;
		pos = forw_raw_line(pos, NULL, NULL);
	}
	return pos;
}

/*
 * Set the hshift for the line starting at line_pos so that the string 
 * between start_off and end_off is visible on the screen.
 */
static void shift_visible(POSITION line_pos, size_t start_off, size_t end_off)
{
	POSITION start_pos = line_pos + start_off;
	POSITION end_pos = line_pos + end_off;
	int start_col = col_from_pos(line_pos, start_pos, NULL_POSITION, -1);
	int end_col = col_from_pos(line_pos, end_pos, start_pos, start_col);
	int swidth = sc_width - line_pfx_width() - (rscroll_char ? 1 : 0);
	int new_hshift;
	if (start_col < 0 || end_col < 0)
		return;
	if (end_col < swidth) /* whole string is in first screen */
		new_hshift = 0;
	else if (start_col > hshift && end_col < hshift + swidth)
		new_hshift = hshift; /* already visible; leave hshift unchanged */
	else 
	{
		int eol_col = col_from_pos(line_pos, NULL_POSITION, end_pos, end_col) - swidth;
		if (start_col >= eol_col) /* whole string is in last screen */
			new_hshift = eol_col;
		else /* shift it to column match_shift */
			new_hshift = (start_col < match_shift) ? 0 : start_col - match_shift;
	}
	if (new_hshift != hshift)
	{
		hshift = new_hshift;
		screen_trashed();
	}
}

/*
 * Should any characters in a specified range be highlighted?
 * If nohide is nonzero, don't consider hide_hilite.
 */
public int is_hilited_attr(POSITION pos, POSITION epos, int nohide, int *p_matches)
{
	int attr;

	if (p_matches != NULL)
		*p_matches = 0;

	if (!status_col &&
	    start_attnpos != NULL_POSITION && 
	    pos <= end_attnpos &&
	     (epos == NULL_POSITION || epos > start_attnpos))
		/*
		 * The attn line overlaps this range.
		 */
		return (AT_HILITE|AT_COLOR_ATTN);

#if OSC8_LINK
	if (osc8_linepos != NULL_POSITION && 
			pos < osc8_text_end && (epos == NULL_POSITION || epos > osc8_text_start))
		return (AT_HILITE|AT_COLOR_SEARCH);
#endif

	attr = hilited_range_attr(pos, epos);
	if (attr == 0)
		return (0);

	if (p_matches == NULL)
		/*
		 * Kinda kludgy way to recognize that caller is checking for
		 * hilite in status column. In this case we want to return
		 * hilite status even if hiliting is disabled or hidden.
		 */
		return (attr);

	/*
	 * Report matches, even if we're hiding highlights.
	 */
	*p_matches = 1;

	if (hilite_search == 0)
		/*
		 * Not doing highlighting.
		 */
		return (0);

	if (!nohide && hide_hilite)
		/*
		 * Highlighting is hidden.
		 */
		return (0);

	return (attr);
}

/*
 * Tree node storage: get the current block of nodes if it has spare
 * capacity, or create a new one if not.
 */
static struct hilite_storage * hlist_getstorage(struct hilite_tree *anchor)
{
	size_t capacity = 1;
	struct hilite_storage *s;

	if (anchor->current)
	{
		if (anchor->current->used < anchor->current->capacity)
			return anchor->current;
		capacity = anchor->current->capacity * 2;
	}

	s = (struct hilite_storage *) ecalloc(1, sizeof(struct hilite_storage));
	s->nodes = (struct hilite_node *) ecalloc(capacity, sizeof(struct hilite_node));
	s->capacity = capacity;
	s->used = 0;
	s->next = NULL;
	if (anchor->current)
		anchor->current->next = s;
	else
		anchor->first = s;
	anchor->current = s;
	return s;
}

/*
 * Tree node storage: retrieve a new empty node to be inserted into the
 * tree.
 */
static struct hilite_node * hlist_getnode(struct hilite_tree *anchor)
{
	struct hilite_storage *s = hlist_getstorage(anchor);
	return &s->nodes[s->used++];
}

/*
 * Rotate the tree left around a pivot node.
 */
static void hlist_rotate_left(struct hilite_tree *anchor, struct hilite_node *n)
{
	struct hilite_node *np = n->parent;
	struct hilite_node *nr = n->right;
	struct hilite_node *nrl = n->right->left;

	if (np != NULL)
	{
		if (n == np->left)
			np->left = nr;
		else
			np->right = nr;
	} else
	{
		anchor->root = nr;
	}
	nr->left = n;
	n->right = nrl;

	nr->parent = np;
	n->parent = nr;
	if (nrl != NULL)
		nrl->parent = n;
}

/*
 * Rotate the tree right around a pivot node.
 */
static void hlist_rotate_right(struct hilite_tree *anchor, struct hilite_node *n)
{
	struct hilite_node *np = n->parent;
	struct hilite_node *nl = n->left;
	struct hilite_node *nlr = n->left->right;

	if (np != NULL)
	{
		if (n == np->right)
			np->right = nl;
		else
			np->left = nl;
	} else
	{
		anchor->root = nl;
	}
	nl->right = n;
	n->left = nlr;

	nl->parent = np;
	n->parent = nl;
	if (nlr != NULL)
		nlr->parent = n;
}


/*
 * Add a new hilite to a hilite list.
 */
static void add_hilite(struct hilite_tree *anchor, struct hilite *hl)
{
	struct hilite_node *p, *n, *u;

	/* Ignore empty ranges. */
	if (hl->hl_startpos >= hl->hl_endpos)
		return;

	p = anchor->root;

	/* Inserting the very first node is trivial. */
	if (p == NULL)
	{
		n = hlist_getnode(anchor);
		n->r = *hl;
		anchor->root = n;
		anchor->lookaside = n;
		return;
	}

	/*
	 * Find our insertion point. If we come across any overlapping
	 * or adjoining existing ranges, shrink our range and discard
	 * if it become empty.
	 */
	for (;;)
	{
		if (hl->hl_startpos < p->r.hl_startpos)
		{
			if (hl->hl_endpos > p->r.hl_startpos && hl->hl_attr == p->r.hl_attr)
				hl->hl_endpos = p->r.hl_startpos;
			if (p->left != NULL)
			{
				p = p->left;
				continue;
			}
			break;
		}
		if (hl->hl_startpos < p->r.hl_endpos && hl->hl_attr == p->r.hl_attr) {
			hl->hl_startpos = p->r.hl_endpos;
			if (hl->hl_startpos >= hl->hl_endpos)
				return;
		}
		if (p->right != NULL)
		{
			p = p->right;
			continue;
		}
		break;
	}

	/*
	 * Now we're at the right leaf, again check for contiguous ranges
	 * and extend the existing node if possible to avoid the
	 * insertion. Otherwise insert a new node at the leaf.
	 */
	if (hl->hl_startpos < p->r.hl_startpos) {
		if (hl->hl_attr == p->r.hl_attr)
		{
			if (hl->hl_endpos == p->r.hl_startpos)
			{
				p->r.hl_startpos = hl->hl_startpos;
				return;
			}
			if (p->prev != NULL && p->prev->r.hl_endpos == hl->hl_startpos)
			{
				p->prev->r.hl_endpos = hl->hl_endpos;
				return;
			}
		}
		p->left = n = hlist_getnode(anchor);
		n->next = p;
		if (p->prev != NULL)
		{
			n->prev = p->prev;
			p->prev->next = n;
		}
		p->prev = n;
	} else {
		if (hl->hl_attr == p->r.hl_attr)
		{
			if (p->r.hl_endpos == hl->hl_startpos)
			{
				p->r.hl_endpos = hl->hl_endpos;
				return;
			}
			if (p->next != NULL && hl->hl_endpos == p->next->r.hl_startpos) {
				p->next->r.hl_startpos = hl->hl_startpos;
				return;
			}
		}
		p->right = n = hlist_getnode(anchor);
		n->prev = p;
		if (p->next != NULL)
		{
			n->next = p->next;
			p->next->prev = n;
		}
		p->next = n;
	}
	n->parent = p;
	n->red = 1;
	n->r = *hl;

	/*
	 * The tree is in the correct order and covers the right ranges
	 * now, but may have become unbalanced. Rebalance it using the
	 * standard red-black tree constraints and operations.
	 */
	for (;;)
	{
		/* case 1 - current is root, root is always black */
		if (n->parent == NULL)
		{
			n->red = 0;
			break;
		}

		/* case 2 - parent is black, we can always be red */
		if (!n->parent->red)
			break;

		/*
		 * constraint: because the root must be black, if our
		 * parent is red it cannot be the root therefore we must
		 * have a grandparent
		 */

		/*
		 * case 3 - parent and uncle are red, repaint them black,
		 * the grandparent red, and start again at the grandparent.
		 */
		u = n->parent->parent->left;
		if (n->parent == u) 
			u = n->parent->parent->right;
		if (u != NULL && u->red)
		{
			n->parent->red = 0;
			u->red = 0;
			n = n->parent->parent;
			n->red = 1;
			continue;
		}

		/*
		 * case 4 - parent is red but uncle is black, parent and
		 * grandparent on opposite sides. We need to start
		 * changing the structure now. This and case 5 will shorten
		 * our branch and lengthen the sibling, between them
		 * restoring balance.
		 */
		if (n == n->parent->right &&
		    n->parent == n->parent->parent->left)
		{
			hlist_rotate_left(anchor, n->parent);
			n = n->left;
		} else if (n == n->parent->left &&
			   n->parent == n->parent->parent->right)
		{
			hlist_rotate_right(anchor, n->parent);
			n = n->right;
		}

		/*
		 * case 5 - parent is red but uncle is black, parent and
		 * grandparent on same side
		 */
		n->parent->red = 0;
		n->parent->parent->red = 1;
		if (n == n->parent->left)
			hlist_rotate_right(anchor, n->parent->parent);
		else
			hlist_rotate_left(anchor, n->parent->parent);
		break;
	}
}

/*
 * Highlight every character in a range of displayed characters.
 */
static void create_hilites(POSITION linepos, constant char *line, constant char *sp, constant char *ep, int attr, int *chpos)
{
	size_t start_index = ptr_diff(sp, line);
	size_t end_index = ptr_diff(ep, line);
	struct hilite hl;
	size_t i;

	/* Start the first hilite. */
	hl.hl_startpos = linepos + chpos[start_index];
	hl.hl_attr = attr;

	/*
	 * Step through the displayed chars.
	 * If the source position (before cvt) of the char is one more
	 * than the source pos of the previous char (the usual case),
	 * just increase the size of the current hilite by one.
	 * Otherwise (there are backspaces or something involved),
	 * finish the current hilite and start a new one.
	 */
	for (i = start_index+1;  i <= end_index;  i++)
	{
		if (chpos[i] != chpos[i-1] + 1 || i == end_index)
		{
			hl.hl_endpos = linepos + chpos[i-1] + 1;
			add_hilite(&hilite_anchor, &hl);
			/* Start new hilite unless this is the last char. */
			if (i < end_index)
			{
				hl.hl_startpos = linepos + chpos[i];
			}
		}
	}
}

/*
 * Make a hilite for each string in a physical line which matches 
 * the current pattern.
 * sp,ep delimit the first match already found.
 */
static void hilite_line(POSITION linepos, constant char *line, size_t line_len, int *chpos, constant char **sp, constant char **ep, int nsp)
{
	size_t line_off = 0;

	/*
	 * sp[0] and ep[0] delimit the first match in the line.
	 * Mark the corresponding file positions, then
	 * look for further matches and mark them.
	 * {{ This technique, of calling match_pattern on subsequent
	 *    substrings of the line, may mark more than is correct
	 *    if the pattern starts with "^".  This bug is fixed
	 *    for those regex functions that accept a notbol parameter
	 *    (currently POSIX, PCRE and V8-with-regexec2). }}
	 * sp[i] and ep[i] for i>0 delimit subpattern matches.
	 * Color each of them with its unique color.
	 */
	do {
		constant char *lep = sp[0];
		int i;
		if (sp[0] == NULL || ep[0] == NULL)
			break;
		for (i = 1;  i < nsp;  i++)
		{
			if (sp[i] == NULL || ep[i] == NULL)
				break;
			if (ep[i] > sp[i])
			{
				create_hilites(linepos, line, lep, sp[i],
					AT_HILITE | AT_COLOR_SEARCH, chpos);
				create_hilites(linepos, line, sp[i], ep[i], 
					AT_HILITE | AT_COLOR_SUBSEARCH(i), chpos);
				lep = ep[i];
			}
		}
		create_hilites(linepos, line, lep, ep[0], 
			AT_HILITE | AT_COLOR_SEARCH, chpos);

		/*
		 * If we matched more than zero characters,
		 * move to the first char after the string we matched.
		 * If we matched zero, just move to the next char.
		 */
		if (ep[0] > &line[line_off])
			line_off = ptr_diff(ep[0], line);
		else if (line_off != line_len)
			line_off++;
		else /* end of line */
			break;
	} while (match_pattern(info_compiled(&search_info), search_info.text,
			line, line_len, line_off, sp, ep, nsp, 1, search_info.search_type));
}
#endif

#if HILITE_SEARCH
/*
 * Find matching text which is currently on screen and highlight it.
 */
static void hilite_screen(void)
{
	struct scrpos scrpos;

	get_scrpos(&scrpos, TOP);
	if (scrpos.pos == NULL_POSITION)
		return;
	prep_hilite(scrpos.pos, position(BOTTOM_PLUS_ONE), -1);
	repaint_hilite(TRUE);
}

/*
 * Change highlighting parameters.
 */
public void chg_hilite(void)
{
	/*
	 * Erase any highlights currently on screen.
	 */
	clr_hilite();
	hide_hilite = FALSE;

	if (hilite_search == OPT_ONPLUS)
		/*
		 * Display highlights.
		 */
		hilite_screen();
}
#endif

/*
 * Figure out where to start a search.
 */
public POSITION search_pos(int search_type)
{
	POSITION pos;
	int sindex;

	if (empty_screen())
	{
		/*
		 * Start at the beginning (or end) of the file.
		 * The empty_screen() case is mainly for 
		 * command line initiated searches;
		 * for example, "+/xyz" on the command line.
		 * Also for multi-file (SRCH_PAST_EOF) searches.
		 */
		if (search_type & SRCH_FORW)
		{
			pos = ch_zero();
		} else
		{
			pos = ch_length();
			if (pos == NULL_POSITION)
			{
				(void) ch_end_seek();
				pos = ch_length();
			}
		}
		sindex = 0;
	} else 
	{
		lbool add_one = FALSE;

		if (how_search == OPT_ON)
		{
			/*
			 * Search does not include current screen.
			 */
			if (search_type & SRCH_FORW)
				sindex = sc_height-1; /* BOTTOM_PLUS_ONE */
			else
				sindex = 0; /* TOP */
		} else if (how_search == OPT_ONPLUS && !(search_type & SRCH_AFTER_TARGET))
		{
			/*
			 * Search includes all of displayed screen.
			 */
			if (search_type & SRCH_FORW)
				sindex = 0; /* TOP */
			else
				sindex = sc_height-1; /* BOTTOM_PLUS_ONE */
		} else 
		{
			/*
			 * Search includes the part of current screen beyond the jump target.
			 * It starts at the jump target (if searching backwards),
			 * or at the jump target plus one (if forwards).
			 */
			sindex = sindex_from_sline(jump_sline);
			if (search_type & SRCH_FORW) 
				add_one = TRUE;
		}
		pos = position(sindex);
		if (add_one)
			pos = forw_raw_line(pos, NULL, NULL);
	}

	/*
	 * If the line is empty, look around for a plausible starting place.
	 */
	if (search_type & SRCH_FORW) 
	{
		while (pos == NULL_POSITION)
		{
			if (++sindex >= sc_height)
				break;
			pos = position(sindex);
		}
	} else 
	{
		while (pos == NULL_POSITION)
		{
			if (--sindex < 0)
				break;
			pos = position(sindex);
		}
	}
	return (pos);
}

/*
 * Check to see if the line matches the filter pattern.
 * If so, add an entry to the filter list.
 */
#if HILITE_SEARCH
static lbool matches_filters(POSITION pos, char *cline, size_t line_len, int *chpos, POSITION linepos, constant char **sp, constant char **ep, int nsp)
{
	struct pattern_info *filter;

	for (filter = filter_infos; filter != NULL; filter = filter->next)
	{
		lbool line_filter = match_pattern(info_compiled(filter), filter->text,
			cline, line_len, 0, sp, ep, nsp, 0, filter->search_type);
		if (line_filter)
		{
			struct hilite hl;
			hl.hl_startpos = linepos;
			hl.hl_endpos = pos;
			hl.hl_attr = 0;
			add_hilite(&filter_anchor, &hl);
			free(cline);
			free(chpos);
			return (TRUE);
		}
	}
	return (FALSE);
}
#endif

/*
 * Get the position of the first char in the screen line which
 * puts tpos on screen.
 */
static POSITION get_lastlinepos(POSITION pos, POSITION tpos, int sheight)
{
	int nlines;

	flush();
	for (nlines = 0;;  nlines++)
	{
		POSITION npos = forw_line(pos, NULL, NULL);
		if (npos > tpos)
		{
			if (nlines < sheight)
				return NULL_POSITION;
			return pos;
		}
		pos = npos;
	}
}

#if OSC8_LINK

/*
 * osc8_parse_info points to the component fields in a parsed OSC8 sequence.
 */
struct osc8_parse_info {
	constant char *osc8_start;
	constant char *osc8_end;
	constant char *params_start;
	constant char *params_end;
	constant char *uri_start;
	constant char *uri_end;
};

/*
 * Parse an OSC8 sequence in a string.
 */
static lbool osc8_parse(constant char *line, constant char *line_end, struct osc8_parse_info *pop)
{
	constant char *oline;
	LWCHAR ch;
	struct ansi_state *pansi;

	pop->osc8_start = pop->osc8_end = pop->uri_start = pop->uri_end = pop->params_start = pop->params_end = NULL;
	oline = line;
	ch = step_charc(&line, +1, line_end);
	/* oline points to character ch, line points to the one after it. */
	pansi = ansi_start(ch);
	if (pansi == NULL)
		return FALSE;
	pop->osc8_start = oline; /* start at the ESC */
	for (;;)
	{
		ansi_state astate = ansi_step(pansi, ch);
		osc8_state ostate = ansi_osc8_state(pansi);
		if (ostate == OSC8_NOT)
			break;
		switch (ostate)
		{
		case OSC8_PARAMS:
			if (pop->params_start == NULL)
				pop->params_start = line;
			break;
		case OSC8_URI:
			if (pop->uri_start == NULL)
			{
				pop->params_end = oline;
				pop->uri_start = line;
			}
			break;
		case OSC_END_CSI:
			if (pop->uri_end == NULL)
				pop->uri_end = oline;
			break;
		case OSC_END:
			ansi_done(pansi);
			if (pop->params_start == NULL || pop->uri_start == NULL)
				return FALSE;
			pop->osc8_end = line;
			if (pop->uri_end == NULL) /* happens when ST is "\7" */
				pop->uri_end = oline;
			if (pop->params_end == NULL) /* should not happen */
				pop->params_end = oline;
			return TRUE;
		default:
			break;
		}
		if (astate != ANSI_MID || line >= line_end)
			break;
		oline = line;
		ch = step_charc(&line, +1, line_end);
	}
	ansi_done(pansi);
	return FALSE;
}

/*
 * Does an OSC8 sequence contain a specified parameter?
 */
static lbool osc8_param_match(POSITION linepos, constant char *line, constant struct osc8_parse_info *op1, constant struct osc8_parse_info *op2, constant char *param, POSITION clickpos)
{
	size_t param_len;
	constant char *p;

	if (clickpos != NULL_POSITION)
	{
		return clickpos >= linepos + ptr_diff(op1->osc8_start, line) &&
		       clickpos < linepos + ptr_diff(op2->osc8_end, line);
	}
	if (param == NULL)
		return TRUE;
	param_len = strlen(param);
	/* Parameters are separated by colons. */
	for (p = op1->params_start;  p + param_len <= op1->params_end; )
	{
		if (strncmp(p, param, param_len) == 0)
		{
		    p += param_len;
			if (p == op1->params_end || *p == ':')
				return TRUE;
		}
		while (p < op1->params_end && *p != ':')
			++p;
		while (p < op1->params_end && *p == ':')
			++p;
	}
	return FALSE;
}

/*
 * Is the URI in an OSC8 sequence empty?
 * "Empty" means zero length, or equal to "#".
 */
static lbool osc8_empty_uri(constant struct osc8_parse_info *op)
{
	return op->uri_end == op->uri_start ||
	       (op->uri_end == op->uri_start+1 && op->uri_start[0] == '#');
}

/*
 * Find the next OSC8 hyperlink in a line.
 * A hyperlink is two OSC8 sequences (the first with a nonempty URI)
 * plus the non-empty text between them.
 * But if searching for a parameter, allow URI and/or text to be empty.
 */
typedef enum { OSC8_NO_MATCH, OSC8_MATCH, OSC8_ALREADY } osc8_match;

static osc8_match osc8_search_line1(int search_type, POSITION linepos, POSITION spos, constant char *line, size_t line_len, constant char *param, POSITION clickpos)
{
	constant char *line_end = &line[line_len];
	struct osc8_parse_info op1;
	struct osc8_parse_info op2;
	constant char *linep;
	constant size_t min_osc8_size = 6; /* "\e]8;;\7" */

	if (search_type & SRCH_FORW)
	{
		for (linep = line; ; linep++)
		{
			if (linep + min_osc8_size > line_end)
				return OSC8_NO_MATCH;
			/* Find the first OSC8 sequence in the line with a nonempty URI,
			 * which begins the hypertext. */
			if (osc8_parse(linep, line_end, &op1) &&
			    (!osc8_empty_uri(&op1) || param != NULL))
			{
				/* Now find the next OSC8 sequence, which ends the hypertext. */
				constant char *linep2;
				for (linep2 = op1.osc8_end; linep2 < line_end; linep2++)
				{
					if (osc8_parse(linep2, line_end, &op2))
						break;
				}
				if (linep2 == line_end)
					op2.osc8_end = op2.osc8_start = line_end;
				if ((op2.osc8_start > op1.osc8_end || param != NULL) &&
				    osc8_param_match(linepos, line, &op1, &op2, param, clickpos))
					break;
			}
		}
	} else
	{
		op2.osc8_end = op2.osc8_start = line_end;
		for (linep = line_end - min_osc8_size; ; linep--)
		{
			if (linep < line)
				return OSC8_NO_MATCH;
			if (osc8_parse(linep, line_end, &op1))
			{
				if (((!osc8_empty_uri(&op1) && op2.osc8_start > op1.osc8_end) || param != NULL) &&
				    osc8_param_match(linepos, line, &op1, &op2, param, clickpos))
					break;
				op2 = op1;
			}
		}
	}
	if (param != NULL)
		/* Don't set osc8 globals if we're just searching for a parameter. */
		return OSC8_MATCH;

	if (osc8_linepos == linepos && osc8_match_start == spos + ptr_diff(op1.osc8_start, line))
		return OSC8_ALREADY; /* already selected */

	osc8_linepos = linepos;
	osc8_match_start  = spos + ptr_diff(op1.osc8_start,   line);
	osc8_match_end    = spos + ptr_diff(op2.osc8_start,   line);
	osc8_params_start = spos + ptr_diff(op1.params_start, line);
	osc8_params_end   = spos + ptr_diff(op1.params_end,   line);
	osc8_uri_start    = spos + ptr_diff(op1.uri_start,    line);
	osc8_uri_end      = spos + ptr_diff(op1.uri_end,      line);
	osc8_text_start   = spos + ptr_diff(op1.osc8_end,     line);
	osc8_text_end     = spos + ptr_diff(op2.osc8_start,   line);

	/* Save URI for message in prompt(). */
	osc8_uri = saven(op1.uri_start, ptr_diff(op1.uri_end, op1.uri_start));
	return OSC8_MATCH;
}

/*
 * Find the N-th OSC8 hyperlink in a line.
 */
static osc8_match osc8_search_line(int search_type, POSITION linepos, constant char *line, size_t line_len, constant char *param, POSITION clickpos, int *matches)
{
	while (*matches > 0)
	{
		POSITION spos = linepos;
		constant char *sline = line;
		size_t sline_len = line_len;
		osc8_match r;
		if (linepos == osc8_linepos && clickpos == NULL_POSITION)
		{
			/*
			 * Already have a hyperlink selected.
			 * Search for the next/previous one in the same line.
			 */
			if (search_type & SRCH_FORW)
			{
				size_t off = (size_t) (osc8_match_end - linepos);
				spos += off;
				sline += off;
				sline_len -= off;
			} else
			{
				sline_len = (size_t) (osc8_match_start - linepos);
			}
		}
		r = osc8_search_line1(search_type, linepos, spos, sline, sline_len, param, clickpos);
		if (r == OSC8_NO_MATCH)
			break;
		if (--*matches <= 0)
			return r;
	}
	return OSC8_NO_MATCH;
}

/*
 * Shift display to make the currently selected OSC8 hyperlink visible.
 */
static void osc8_shift_visible(void)
{
	if (chop_line())
	{
		size_t start_off = (size_t)(osc8_match_start - osc8_linepos);
		size_t end_off = (size_t)(osc8_match_end - osc8_linepos);
		shift_visible(osc8_linepos, start_off, end_off);
	}
	/* {{ What about the (plastlinepos != NULL) case in search_range? }} */
}

#endif /* OSC8_LINK */

/*
 * Search a subset of the file, specified by start/end position.
 */
static int search_range(POSITION pos, POSITION endpos, int search_type, int matches, int maxlines, POSITION *plinepos, POSITION *pendpos, POSITION *plastlinepos)
{
	constant char *line;
	char *cline;
	size_t line_len;
	LINENUM linenum;
	#define NSP (NUM_SEARCH_COLORS+2)
	constant char *sp[NSP];
	constant char *ep[NSP];
	lbool line_match;
	int cvt_ops;
	size_t cvt_len;
	int *chpos;
	POSITION linepos, oldpos;
	int skip_bytes = 0;
	size_t swidth = (size_t) (sc_width - line_pfx_width()); /*{{type-issue}}*/
	size_t sheight = (size_t) (sc_height - sindex_from_sline(jump_sline));

	linenum = find_linenum(pos);
	if (nosearch_header_lines && linenum <= header_lines)
	{
		linenum = header_lines + 1;
		pos = find_pos(linenum);
	}
	if (pos == NULL_POSITION)
		return (-1);
	oldpos = pos;
	/* When the search wraps around, end at starting position. */
	if ((search_type & SRCH_WRAP) && endpos == NULL_POSITION)
		endpos = pos;
	flush();
	for (;;)
	{
		/*
		 * Get lines until we find a matching one or until
		 * we hit end-of-file (or beginning-of-file if we're 
		 * going backwards), or until we hit the end position.
		 */
		if (ABORT_SIGS())
		{
			/*
			 * A signal aborts the search.
			 */
			return (-1);
		}

		if ((endpos != NULL_POSITION && !(search_type & SRCH_WRAP) &&
			(((search_type & SRCH_FORW) && pos >= endpos) ||
			 ((search_type & SRCH_BACK) && pos <= endpos))) || maxlines == 0)
		{
			/*
			 * Reached end position without a match.
			 */
			if (pendpos != NULL)
				*pendpos = pos;
			return (matches);
		}
		if (maxlines > 0)
			maxlines--;

		if (search_type & SRCH_FORW)
		{
			/*
			 * Read the next line, and save the 
			 * starting position of that line in linepos.
			 */
			linepos = pos;
			pos = forw_raw_line(pos, &line, &line_len);
			if (linenum != 0)
				linenum++;
		} else
		{
			/*
			 * Read the previous line and save the
			 * starting position of that line in linepos.
			 */
			pos = back_raw_line(pos, &line, &line_len);
			linepos = pos;
			if (linenum != 0)
				linenum--;
		}

		if (pos == NULL_POSITION)
		{
			/*
			 * Reached EOF/BOF without a match.
			 */
			if (search_type & SRCH_WRAP)
			{
				/*
				 * The search wraps around the current file, so
				 * try to continue at BOF/EOF.
				 */
				if (search_type & SRCH_FORW)
				{
					pos = ch_zero();
				} else
				{
					pos = ch_length();
					if (pos == NULL_POSITION)
					{
						(void) ch_end_seek();
						pos = ch_length();
					}
				}
				if (pos != NULL_POSITION) {
					/*
					 * Wrap-around was successful. Clear
					 * the flag so we don't wrap again, and
					 * continue the search at new pos.
					 */
					search_wrapped = TRUE;
					search_type &= ~SRCH_WRAP;
					linenum = find_linenum(pos);
					continue;
				}
			}
			if (pendpos != NULL)
				*pendpos = oldpos;
			return (matches);
		}

		/*
		 * If we're using line numbers, we might as well
		 * remember the information we have now (the position
		 * and line number of the current line).
		 * Don't do it for every line because it slows down
		 * the search.  Remember the line number only if
		 * we're "far" from the last place we remembered it.
		 */
		if (linenums && abs((int)(pos - oldpos)) > 2048)
			add_lnum(linenum, pos);
		oldpos = pos;

#if HILITE_SEARCH
		if (is_filtered(linepos))
			continue;
#endif
		if (nosearch_header_cols)
			skip_bytes = skip_columns(header_cols, &line, &line_len);
#if OSC8_LINK
		if (search_type & SRCH_OSC8)
		{
			if (osc8_search_line(search_type, linepos, line, line_len, osc8_search_param, NULL_POSITION, &matches) != OSC8_NO_MATCH)
			{
				if (plinepos != NULL)
					*plinepos = linepos;
				osc8_shift_visible();
				return (0);
			}
			continue;
		}
#endif
		/*
		 * If it's a caseless search, convert the line to lowercase.
		 * If we're doing backspace processing, delete backspaces.
		 */
		cvt_ops = get_cvt_ops(search_type);
		cvt_len = cvt_length(line_len, cvt_ops);
		cline = (char *) ecalloc(1, cvt_len);
		chpos = cvt_alloc_chpos(cvt_len);
		cvt_text(cline, line, chpos, &line_len, cvt_ops);

#if HILITE_SEARCH
		/*
		 * If any filters are in effect, ignore non-matching lines.
		 */
		if (filter_infos != NULL &&
		   ((search_type & SRCH_FIND_ALL) ||
		     prep_startpos == NULL_POSITION ||
		     linepos < prep_startpos || linepos >= prep_endpos)) {
			if (matches_filters(pos, cline, line_len, chpos, linepos, sp, ep, NSP))
				continue;
		}
#endif

		/*
		 * Test the next line to see if we have a match.
		 * We are successful if we either want a match and got one,
		 * or if we want a non-match and got one.
		 */
		if (prev_pattern(&search_info))
		{
			line_match = match_pattern(info_compiled(&search_info), search_info.text,
				cline, line_len, 0, sp, ep, NSP, 0, search_type);
			if (line_match)
			{
				/*
				 * Got a match.
				 */
				if (search_type & SRCH_FIND_ALL)
				{
#if HILITE_SEARCH
					/*
					 * We are supposed to find all matches in the range.
					 * Just add the matches in this line to the 
					 * hilite list and keep searching.
					 */
					hilite_line(linepos + skip_bytes, cline, line_len, chpos, sp, ep, NSP);
#endif
				} else if (--matches <= 0)
				{
					/*
					 * Found the one match we're looking for.
					 * Return it.
					 */
#if HILITE_SEARCH
					if (hilite_search == OPT_ON)
					{
						/*
						 * Clear the hilite list and add only
						 * the matches in this one line.
						 */
						clr_hilite();
						hilite_line(linepos + skip_bytes, cline, line_len, chpos, sp, ep, NSP);
					}
#endif
					if (chop_line())
					{
						/*
						 * If necessary, shift horizontally to make sure 
						 * search match is fully visible.
						 */
						if (sp[0] != NULL && ep[0] != NULL)
						{
							size_t start_off = ptr_diff(sp[0], cline);
							size_t end_off = ptr_diff(ep[0], cline);
							shift_visible(linepos, chpos[start_off], chpos[end_off]);
						}
					} else if (plastlinepos != NULL)
					{
						/*
						 * If the line is so long that the highlighted match
						 * won't be seen when the line is displayed normally
						 * (starting at the first char) because it fills the whole 
						 * screen and more, scroll forward until the last char
						 * of the match appears in the last line on the screen.
						 * lastlinepos is the position of the first char of that last line.
						 */
						if (ep[0] != NULL)
						{
							size_t end_off = ptr_diff(ep[0], cline);
							if (end_off >= swidth * sheight / 4) /* heuristic */
								*plastlinepos = get_lastlinepos(linepos, linepos + chpos[end_off], (int) sheight);
						}
					}
					free(cline);
					free(chpos);
					if (plinepos != NULL)
						*plinepos = linepos;
					return (0);
				}
			}
		}
		free(cline);
		free(chpos);
	}
}

#if OSC8_LINK

/*
 * Search for and select the next OSC8 sequence, forward or backward.
 */
public void osc8_search(int search_type, constant char *param, int matches)
{
	POSITION pos;
	int match;
	int curr_sindex = -1;

	if (osc8_linepos != NULL_POSITION && (curr_sindex = onscreen(osc8_linepos)) >= 0)
	{
		/* Continue search in same line as current match. */
		constant char *line;
		size_t line_len;
		pos = forw_raw_line(osc8_linepos, &line, &line_len);
		if (pos != NULL_POSITION)
		{
			if (osc8_search_line(search_type, osc8_linepos, line, line_len, param, NULL_POSITION, &matches) != OSC8_NO_MATCH)
			{
				osc8_shift_visible();
#if HILITE_SEARCH
				repaint_hilite(TRUE);
#endif
				return;
			}
		}
		search_type |= SRCH_AFTER_TARGET;
	}
	/*
	 * If the current OSC 8 link is on screen, start searching after it.
	 * Otherwise, start searching at the -j line like a normal search.
	 */
	if (curr_sindex >= 0)
		pos = osc8_linepos;
	else
		pos = search_pos(search_type);
	if (pos == NULL_POSITION)
	{
		error("Nothing to search", NULL_PARG);
		return;
	}
	osc8_search_param = param;
	match = search_range(pos, NULL_POSITION, search_type | SRCH_OSC8, matches, -1, &pos, NULL, NULL);
	osc8_search_param = NULL;
	if (match != 0)
	{
		error("OSC 8 link not found", NULL_PARG);
		return;
	}
	/* If new link is on screen, just highlight it without scrolling. */
	if (onscreen(pos) < 0)
		jump_loc(pos, jump_sline);
#if HILITE_SEARCH
	repaint_hilite(TRUE);
#endif
}

/*
 * If a mouse click is on an OSC 8 link, select the link.
 */
public lbool osc8_click(int sindex, int col)
{
#if OSC8_LINK
	POSITION linepos = position(sindex);
	POSITION clickpos;
	constant char *line;
	size_t line_len;
	int matches = 1;
	int r;

	if (linepos == NULL_POSITION)
		return FALSE;
	clickpos = pos_from_col(linepos, col, NULL_POSITION, -1);
	if (clickpos == NULL_POSITION)
		return FALSE;
	linepos = beginning_of_line(linepos);
	if (forw_raw_line(linepos, &line, &line_len) == NULL_POSITION)
		return FALSE;
	r = osc8_search_line(SRCH_FORW|SRCH_OSC8, linepos, line, line_len, NULL, clickpos, &matches);
	if (r != OSC8_NO_MATCH)
	{
#if HILITE_SEARCH
		repaint_hilite(TRUE);
#endif
		if (r == OSC8_ALREADY)
			osc8_open();
		return TRUE;
	}
#else
	(void) sindex; (void) col;
#endif /* OSC8_LINK */
	return FALSE;
}

/*
 * Return the length of the scheme prefix in a URI.
 */
static size_t scheme_length(constant char *uri, size_t uri_len)
{
	size_t plen;
	for (plen = 0;  plen < uri_len;  plen++)
		if (uri[plen] == ':')
			return plen;
	return 0;
}

/*
 * Re-read the line containing the selected OSC8 link.
 */
static lbool osc8_read_selected(struct osc8_parse_info *op)
{
	constant char *line;
	size_t line_len;
	POSITION pos;

	pos = forw_raw_line(osc8_linepos, &line, &line_len);
	if (pos == NULL_POSITION)
		return FALSE;
	op->osc8_start    = &line[osc8_match_start - osc8_linepos];
	op->osc8_end      = &line[osc8_match_end - osc8_linepos];
	op->params_start  = &line[osc8_params_start - osc8_linepos];
	op->params_end    = &line[osc8_params_end - osc8_linepos];
	op->uri_start     = &line[osc8_uri_start - osc8_linepos];
	op->uri_end       = &line[osc8_uri_end - osc8_linepos];
	return TRUE;
}

/*
 * Open the currently selected OSC8 link.
 */
public void osc8_open(void)
{
	struct osc8_parse_info op;
	char env_name[64];
	size_t scheme_len;
	constant char *handler;
	char *cmd;
	char *uri_q;
	size_t uri_len;
	char *p;
	static constant char *env_name_pfx = "LESS_OSC8_OPEN_";

	if (osc8_linepos == NULL_POSITION)
	{
		error("No OSC8 link selected", NULL_PARG);
		return;
	}
	if (!osc8_read_selected(&op))
	{
		error("Cannot find OSC8 link", NULL_PARG);
		return;
	}
	/*
	 * Read a "handler" shell cmd from environment variable "LESS_OSC8_OPEN_scheme".
	 * Append the URI to the handler as an argument, and execute it.
	 */
	uri_len = ptr_diff(op.uri_end, op.uri_start);
	scheme_len = scheme_length(op.uri_start, uri_len);
	if (scheme_len == 0 && op.uri_start[0] == '#')
	{
		/* Link to "id=" in same file. */
		char *param = ecalloc(uri_len+3, sizeof(char));
		strcpy(param, "id=");
		strncpy(param+3, op.uri_start+1, uri_len-1);
		param[uri_len+2] = '\0';
		osc8_search(SRCH_FORW|SRCH_WRAP, param, 1);
		free(param);
		return;
	}
	if (scheme_len == 0)
	{
		SNPRINTF1(env_name, sizeof(env_name), "%sNONE", env_name_pfx);
	} else
	{
		SNPRINTF3(env_name, sizeof(env_name), "%s%.*s", env_name_pfx, (int) scheme_len, op.uri_start);
		for (p = &env_name[strlen(env_name_pfx)];  *p != '\0';  p++)
			if (ASCII_IS_UPPER(*p))
				*p = ASCII_TO_LOWER(*p);
	}
	handler = lgetenv(env_name);
	if (isnullenv(handler) || strcmp(handler, "-") == 0)
		handler = lgetenv("LESS_OSC8_OPEN_ANY");
	if (isnullenv(handler))
	{
		PARG parg;
		parg.p_string = env_name + strlen(env_name_pfx); /* {{ tricky }} */
		error("No handler for \"%s\" link type", &parg);
		return;
	}
	uri_q = shell_quoten(op.uri_start, uri_len);
	cmd = ecalloc(strlen(handler) + strlen(uri_q) + 2, sizeof(char));
	sprintf(cmd, "%s %s", handler, uri_q);
	free(uri_q);
	{
		constant char *exec_cmd = cmd;
		constant char *done_msg = "link done";
		POSITION save_osc8_linepos = osc8_linepos;
		if (*exec_cmd == CONTROL('P'))
		{
			done_msg = NULL;
			exec_cmd++;
		}
		lsystem(exec_cmd, done_msg);
		/* lsystem reedits the input file which clears the selected
		 * OSC8 link, so restore it. */
		osc8_linepos = save_osc8_linepos;
	}
	free(cmd);
}

/*
 * Jump to the currently selected OSC8 link.
 */
public void osc8_jump(void)
{
	if (osc8_linepos == NULL_POSITION)
	{
		error("No OSC8 link selected", NULL_PARG);
		return;
	}
	jump_loc(osc8_linepos, jump_sline);
}

#endif /* OSC8_LINK */

/*
 * search for a pattern in history. If found, compile that pattern.
 */
static int hist_pattern(int search_type)
{
#if CMD_HISTORY
	constant char *pattern;

	set_mlist(ml_search, 0);
	pattern = cmd_lastpattern();
	if (pattern == NULL)
		return (0);

	if (set_pattern(&search_info, pattern, search_type, 1) < 0)
		return (-1);

#if HILITE_SEARCH
	if (hilite_search == OPT_ONPLUS && !hide_hilite)
		hilite_screen();
#endif

	return (1);
#else /* CMD_HISTORY */
	return (0);
#endif /* CMD_HISTORY */
}

/*
 * Change the caseless-ness of searches.  
 * Updates the internal search state to reflect a change in the -i flag.
 */
public void chg_caseless(void)
{
	if (!search_info.is_ucase_pattern)
	{
		/*
		 * Pattern did not have uppercase.
		 * Set the search caselessness to the global caselessness.
		 */
		is_caseless = caseless;
		/*
		 * If regex handles caseless, we need to discard 
		 * the pattern which was compiled with the old caseless.
		 */
#if !RE_HANDLES_CASELESS
		/* Less handles caseless, so the pattern doesn't change. */
		return;
#endif
	}
	/*
	 * Regenerate the pattern using the new state.
	 */
	if (prev_pattern(&search_info))
	{
		clear_pattern(&search_info);
		(void) hist_pattern(search_info.search_type);
	}
}

/*
 * Search for the n-th occurrence of a specified pattern, 
 * either forward or backward.
 * Return the number of matches not yet found in this file
 * (that is, n minus the number of matches found).
 * Return -1 if the search should be aborted.
 * Caller may continue the search in another file 
 * if less than n matches are found in this file.
 */
public int search(int search_type, constant char *pattern, int n)
{
	POSITION pos;
	POSITION opos;
	POSITION lastlinepos = NULL_POSITION;

	if (pattern == NULL || *pattern == '\0')
	{
		/*
		 * A null pattern means use the previously compiled pattern.
		 */
		search_type |= SRCH_AFTER_TARGET;
		if (!prev_pattern(&search_info))
		{
			int r = hist_pattern(search_type);
			if (r == 0)
				error("No previous regular expression", NULL_PARG);
			if (r <= 0)
				return (-1);
		}
		if ((search_type & SRCH_NO_REGEX) != 
		      (search_info.search_type & SRCH_NO_REGEX))
		{
			error("Please re-enter search pattern", NULL_PARG);
			return -1;
		}
#if HILITE_SEARCH
		if (hilite_search == OPT_ON || status_col)
		{
			/*
			 * Erase the highlights currently on screen.
			 * If the search fails, we'll redisplay them later.
			 */
			repaint_hilite(FALSE);
		}
		if (hilite_search == OPT_ONPLUS && hide_hilite)
		{
			/*
			 * Highlight any matches currently on screen,
			 * before we actually start the search.
			 */
			hide_hilite = FALSE;
			hilite_screen();
		}
		hide_hilite = FALSE;
#endif
	} else
	{
		/*
		 * Compile the pattern.
		 */
		int show_error = !(search_type & SRCH_INCR);
		if (set_pattern(&search_info, pattern, search_type, show_error) < 0)
			return (-1);
#if HILITE_SEARCH
		if (hilite_search || status_col)
		{
			/*
			 * Erase the highlights currently on screen.
			 * Also permanently delete them from the hilite list.
			 */
			repaint_hilite(FALSE);
			hide_hilite = FALSE;
			clr_hilite();
		}
		if (hilite_search == OPT_ONPLUS || status_col)
		{
			/*
			 * Highlight any matches currently on screen,
			 * before we actually start the search.
			 */
			hilite_screen();
		}
#endif
	}

	/*
	 * Figure out where to start the search.
	 */
	pos = ((search_type & SRCH_INCR) && search_incr_start != NULL_POSITION) ?
		search_incr_start : search_pos(search_type);
	opos = position(sindex_from_sline(jump_sline));
	if (pos == NULL_POSITION)
	{
		/*
		 * Can't find anyplace to start searching from.
		 */
		if (search_type & SRCH_PAST_EOF)
			return (n);
#if HILITE_SEARCH
		if (hilite_search == OPT_ON || status_col)
			repaint_hilite(TRUE);
#endif
		error("Nothing to search", NULL_PARG);
		return (-1);
	}

	n = search_range(pos, NULL_POSITION, search_type, n, -1,
			&pos, (POSITION*)NULL, &lastlinepos);
	/*
	 * This ABORT_SIGS check ensures that if the user presses interrupt,
	 * we don't continue and complete the search.
	 * That is, we leave the display unchanged.
	 * {{ Is this true? Do we always want to abort the search on interrupt? }}
	 */
	if (ABORT_SIGS())
		return (-1);
	if (n != 0)
	{
		/*
		 * Search was unsuccessful.
		 */
#if HILITE_SEARCH
		if ((hilite_search == OPT_ON || status_col) && n > 0)
			/*
			 * Redisplay old hilites.
			 */
			repaint_hilite(TRUE);
#endif
		return (n);
	}

	if (!(search_type & SRCH_NO_MOVE))
	{
		/*
		 * Go to the matching line.
		 */
		if (lastlinepos != NULL_POSITION)
			jump_loc(lastlinepos, BOTTOM);
		else if (pos != opos)
			jump_loc(pos, jump_sline);
	}

#if HILITE_SEARCH
	if (hilite_search == OPT_ON || status_col)
		/*
		 * Display new hilites in the matching line.
		 */
		repaint_hilite(TRUE);
#endif
	return (0);
}

#if HILITE_SEARCH
/*
 * Prepare hilites in a given range of the file.
 *
 * The pair (prep_startpos,prep_endpos) delimits a contiguous region
 * of the file that has been "prepared"; that is, scanned for matches for
 * the current search pattern, and hilites have been created for such matches.
 * If prep_startpos == NULL_POSITION, the prep region is empty.
 * If prep_endpos == NULL_POSITION, the prep region extends to EOF.
 * prep_hilite asks that the range (spos,epos) be covered by the prep region.
 */
public void prep_hilite(POSITION spos, POSITION epos, int maxlines)
{
	POSITION nprep_startpos = prep_startpos;
	POSITION nprep_endpos = prep_endpos;
	POSITION new_epos;
	POSITION max_epos;
	int result;
	int i;

	if (!prev_pattern(&search_info) && !is_filtering())
		return;

	/*
	 * Make sure our prep region always starts at the beginning of
	 * a line. (search_range takes care of the end boundary below.)
	 */
	spos = back_raw_line(spos+1, NULL, NULL);

	/*
	 * If we're limited to a max number of lines, figure out the
	 * file position we should stop at.
	 */
	if (maxlines < 0)
		max_epos = NULL_POSITION;
	else
	{
		max_epos = spos;
		for (i = 0;  i < maxlines;  i++)
			max_epos = forw_raw_line(max_epos, NULL, NULL);
	}
	if (epos == NULL_POSITION || (max_epos != NULL_POSITION && epos > max_epos))
		epos = max_epos;

	/*
	 * Find two ranges:
	 * The range that we need to search (spos,epos); and the range that
	 * the "prep" region will then cover (nprep_startpos,nprep_endpos).
	 */

	if (prep_startpos == NULL_POSITION ||
	    (epos != NULL_POSITION && epos < prep_startpos) ||
	    spos > prep_endpos)
	{
		/*
		 * New range is not contiguous with old prep region.
		 * Discard the old prep region and start a new one.
		 */
		clr_hilite();
		clr_filter();
		nprep_startpos = nprep_endpos = spos;
	} else
	{
		/*
		 * New range partially or completely overlaps old prep region.
		 */
		if (epos != NULL_POSITION && epos <= prep_endpos)
		{
			/*
			 * New range ends within old prep region.
			 * Truncate search to end at start of old prep region.
			 */
			epos = prep_startpos;
		}
		if (spos < prep_startpos)
		{
			/*
			 * New range starts before old prep region.
			 * Extend old prep region backwards to start at 
			 * start of new range.
			 */
			nprep_startpos = spos;
		} else /* (spos >= prep_startpos) */
		{
			/*
			 * New range starts within or after old prep region.
			 * Trim search to start at end of old prep region.
			 */
			spos = prep_endpos;
		}
	}

	if (epos == NULL_POSITION || epos > spos)
	{
		int search_type = SRCH_FORW | SRCH_FIND_ALL;
		search_type |= (search_info.search_type & SRCH_NO_REGEX);
		for (;;) 
		{
			result = search_range(spos, epos, search_type, 0, maxlines, (POSITION*)NULL, &new_epos, (POSITION*)NULL);
			if (result < 0)
				return;
			if (nprep_endpos == NULL_POSITION || new_epos > nprep_endpos)
				nprep_endpos = new_epos;

			/*
			 * Check both ends of the resulting prep region to
			 * make sure they're not filtered. If they are,
			 * keep going at least one more line until we find
			 * something that isn't filtered, or hit the end.
			 */
			if (prep_endpos == NULL_POSITION || nprep_endpos > prep_endpos)
			{
				if (new_epos >= nprep_endpos && is_filtered(new_epos-1))
				{
					spos = nprep_endpos;
					epos = forw_raw_line(nprep_endpos, NULL, NULL);
					if (epos == NULL_POSITION)
						break;
					maxlines = 1;
					nprep_endpos = epos;
					continue;
				}
			}

			if (prep_startpos == NULL_POSITION || nprep_startpos < prep_startpos)
			{
				if (nprep_startpos > 0 && is_filtered(nprep_startpos))
				{
					epos = nprep_startpos;
					spos = back_raw_line(nprep_startpos, NULL, NULL);
					if (spos == NULL_POSITION)
						break;
					nprep_startpos = spos;
					maxlines = 1;
					continue;
				}
			}
			break;
		}
	}
	prep_startpos = nprep_startpos;
	prep_endpos = nprep_endpos;
}

/*
 * Set the pattern to be used for line filtering.
 */
public void set_filter_pattern(constant char *pattern, int search_type)
{
	struct pattern_info *filter;

	clr_filter();
	if (pattern == NULL || *pattern == '\0')
	{
		/* Clear and free all filters. */
		for (filter = filter_infos; filter != NULL; )
		{
			struct pattern_info *next_filter = filter->next;
			clear_pattern(filter);
			free(filter);
			filter = next_filter;
		}
		filter_infos = NULL;
	} else
	{
		/* Create a new filter and add it to the filter_infos list. */
		filter = ecalloc(1, sizeof(struct pattern_info));
		init_pattern(filter);
		if (set_pattern(filter, pattern, search_type, 1) < 0)
		{
			free(filter);
			return;
		}
		filter->next = filter_infos;
		filter_infos = filter;
	}
	screen_trashed();
}

/*
 * Is there a line filter in effect?
 */
public lbool is_filtering(void)
{
	if (ch_getflags() & CH_HELPFILE)
		return (FALSE);
	return (filter_infos != NULL);
}
#endif

#if HAVE_V8_REGCOMP
/*
 * This function is called by the V8 regcomp to report 
 * errors in regular expressions.
 */
public int reg_show_error = 1;

void regerror(constant char *s)
{
	PARG parg;

	if (!reg_show_error)
		return;
	parg.p_string = s;
	error("%s", &parg);
}
#endif

