
                                Uedit Help!
                   Copyright (C) 1986-91, Rick Stiles
  (S=Shift, A=Alt, C=Ctl, L=lAmiga, R=rAmiga, BS=BackSpace, KP=KeyPad)

            *** Use TEACH KEYS to learn key assignments ***
                          
       *** Click window's Title Bar to switch to Tiny Window ***
       
    *** pmEsc is the Primitive Mode Esc character, normally ESC ***
    ***   Primitive Mode is used for string and number inputs   ***
    *** You can press ESC and change pmEsc to the Return key or ***
    ***                some other ctrl character                ***

SCROLL:
mouse:          Hold down button & move mouse to scroll up/down
R-s:            Scroll Type in range 0 to 2
upArrow:        Scroll up 1 line
downArrow:      Scroll down 1 line
leftArrow:      Scroll right 1 char
rightArrow:     Scroll left 1 char
S-upArrow:      Scroll up 11 lines
S-downArrow:    Scroll down 11 lines
S-leftArrow:    Scroll right 10 chars
S-rightArrow:   Scroll left 10 chars
A-upArrow:      Scroll to start of page
A-downArrow:    Scroll to bottom of page
A-leftArrow:    Scroll right 20 chars
A-rightArrow:   Scroll left 20 chars
C-upArrow:      Scroll to start of file
C-downArrow:    Scroll to end of file
C-leftArrow:    Scroll to end of line
C-rightArrow:   Scroll to start of line
gadget3:        Scroll display down
gadget4:        Scroll display up

CURSOR:
mouse:      Place cursor or scroll if button held
kp5:        Find cursor and center it in window
kp8:        Move cursor up 1 line
kp2:        Move cursor down 1 line
kp4:        Move cursor to start of word
kp6:        Move cursor to end of word
S-kp4:      Move cursor left 1 char
S-kp6:      Move cursor right 1 char
A-kp4:      Move cursor to start of line
A-kp6:      Move cursor to end of line
A-kp8:      Move cursor to start of page
A-kp2:      Move cursor to end of page
C-kp8:      Move cursor to start of form
C-kp2:      Move cursor to end of form

HYPER TEXT:
R-gadget1: Get word input and lookup hyper word, going into hyper text mode
R-gadget3: Open hyper text facility for HyperHelp
R-gadget4: Close hyper text facility
R-mouse:   Get clicked hyper word, go into hyper text mode & find it

TABS:
S-tab:   Transparent tab forward
A-tab:   Transparent tab backward
C-tab:   Untab - delete white space back to previous tab column
AC-tab:  Switch to/from using spaces for tabs or using real tabs
SA-tab:  Show tab ruler above cursor line
SC-tab:  Set tab ruler using mouse or keys
L-t:     Convert tabs in file to spaces
R-t:     Convert spaces in file to tabs
SAC-tab: Set tab table number (0-4) to use for tab spacing

AMIGADOS:
C-mouse: in blackspace:  click-load dir/filename
C-mouse: in whitespace:  show buf38 split window directory list
A-z:   Get directory listing. (Also sets directoryname used in C-mouse.)
AC-z:  Change the current Uedit directory
C-y:   Execute an AmigaDOS command, but don't collect the results
C-z:   Execute an AmigaDOS command and get results

FILES:
gadget1: Switch to next file
gadget2: Switch to previous file
f1:      Switch to next file
S-f1:    Switch to previous file

OPEN:
C-mouse: Load File or select Directory that is CTRL-clicked
A-f1:    Load a file
C-f1:    Open new "Noname" file
SA-f1:   Insert file at cursor
SC-f1:   Restore current file to original
L-f1:    Bring up file requester (Needs ARP library & FileReq prog in C:.)
A-n:     Rename the file in the window

SAVE:
f2:      Save file currently in window
S-f2:    Save file under different name
A-f2:    Save all changed files
SC-f2:   Save hilite as...
SA-f2:   Abort the current file save

CLOSE:
f3:      Close current file.  If changed, "Save changes?"
S-f3:    Auto-save file, if changed, then close it
closeBox:  If changed, "Save changes?"  Close, if no files, "Really quit?"

QUIT:
f4:     Ask "Save changes?", if any changes, then "Really quit?"
S-f4:   Auto-save changes, then quit
A-f4:   Quit fast, WITHOUT saving any files

BUFFERS:
A-w:    Swap current buffer to buffer 0 (the "home" buffer)
A-f3:   Free all work (non-file) buffers
SA-f6:  Input the number of a buffer to edit
L-w:    Push current file onto buffer stack
R-w:    Pop buffer off of stack
SA-w:   Rotate buffer stack
C-w:    Swap the current file with buffer 41
A-f:    Input the number of a buffer to free
SC-f6:  Examine all buffers that aren't empty

SCRATCH DELETES & UNDO:
kp0:    UNDO scratch deletes, inserting scratch delete buffer at cursor
C-d:    Delete cursor line, storing it in Undo buffer
kp7:    Delete word left, storing it in Undo buffer
kp9:    Delete word right, storing it in Undo buffer
S-kp7:  Delete char to left of cursor, storing it in Undo buffer
S-kp9:  Delete char under cursor, storing it in Undo buffer
A-kp7:  Delete to start of line, storing it in Undo buffer
A-kp9:  Delete to end of line, storing it in Undo buffer
C-kp7:  Delete from cursor to start of page, storing it in Undo buffer
C-kp9:  Delete from cursor to end of page, storing it in Undo buffer

HILITE:
SAC-mouse: Drag mouse and mark hilite region
S-mouse:   Set start of hilite region
A-mouse:   Set end of hilite region
kp1:       Set start of hilite region at cursor
kp3:       Set end of hilite region at cursor
kpDot:     Copy hilite region into buffer
kpMinus:   Copy hilite region into buffer, then delete hilite region
kpEnter:   Insert copied hilite at cursor
A-h:       Unmark the hilite region
C-h:       Erase hilite region.  No Copy is made!

INVERT:
SC-mouse:  Set start of invert region
AC-mouse:  Set end of invert region
C-kp1:     Set start of invert region at cursor
C-kp3:     Set end of invert region at cursor
C-kpDot:   Copy invert region into buffer
C-kpMinus: Copy invert region into buffer, then delete invert region
C-kpEnter: Insert copied invert region at cursor
A-i:       Unmark the invert region
C-i:       Erase the invert region.  No Copy is made!

HELP/COLORS/INTERLACE:
R-h:       Toggle hide display flag (used w/ cmdMultiplier & learn mode)
help:      Load and show help file - press again to release help
C-help:    Start Teach Keys mode - press Amiga-ESC to end it
SC-help:   Refresh window (or screen in interlace), including title bar
A-help:    Rotate 4 Workbench colors in Uedit
SAC-Help:  Rebuild the menus by running the startup command
R-s:       Toggle scroll type, 0 = slow, 1 = fast
R-h:       Toggle hide display
S-esc:     Toggle to/from interlace display mode
R-f1:      Regular screen, 1 bitplane  (2 colors)
R-f2:      Regular screen, 2 bitplanes (4 colors)
R-f3:      Lace screen, 1 bitplane  (2 colors)
R-f4:      Lace screen, 2 bitplanes (4 colors)
A-esc:     Tune RGB colors in interlace using mouse. (See A-Help also.)

SEARCH & REPLACE:
f7:     Input search text & search fwd.  (EitherOr="$", wildcards= "?" & "*".)
S-f7:   Modify existing search text and then search fwd
A-f7:   Input new search wildcard & allBut characters
C-f7:   Input new search either-or character
f8:     Input replace string to use in search-replace
S-f8:   Modify existing replace string
f9:     Search forward, mark matched region, put cursor at start of rgn
S-f9:   Search backward, mark matched region, put cursor at start of rgn
f10:    Replace matched region with replace text, then search forward
S-f10:  Replace matched region with replace text, then search backward
A-f10:  Replace and continue forward search-replace until search fails
C-8:    Toggle case-sensitivity of search

GREP:
lAmiga-f7:  Set grep string (/search/replace/)
lAmiga-f9:  Grep search forward
rAmiga-f9:  Grep search backward
lAmiga-f10: Grep search & replace forward
rAmiga-f10: Grep search & replace backward

BOOKMARKS:
S-gadget1:  Goto next bookmark
S-gadget2:  Goto previous bookmark
S-gadget3:  Set bookmark at cursor
A-gadget3:  Clear all bookmarks

KEYS:
f5:     Swap next 2 commands
SAC-f6: Kill next command
L-f6:   Find out if keys have got commands attached
A-m:    Swap mouse buttonUp with the next key pressed
A-u:    Toggle using printable keys for commands/normal typing
C-t:    Teach One, shows help message on next key

CONFIG & COMPILE:
f6:     Compile command at or following cursor
A-f6:   Save UE data to disk.  Default is Data! or last name you gave
C-f6:   Restore UE data from disk.  Default is Data! or last name you gave
AC-f6:  Compile default values at the top of Config! file
S-f6:   Select buf44 to use for scratch editing or writing commands

LEARN MODE:
C-5:  Save a learned sequence
C-6:  Load a learned sequence
C-7:  Load and run learned sequence
C-s:  Start/abort Learn Mode.  (Use C-r to finish & to run it.)
C-r:  Finish Learn Mode or run learned sequence

SPLIT WINDOWS:
L-0:  Remove current split window
L-=:  Adjust active split window size with mouse
L-c:  Split window to show current file
L-1:  Split window to show Undo buffer
L-2:  Split window to show search buffer
L-3:  Split window to show replace buffer
L-4:  Split window to show copied hilite buffer
L-5:  Split window to show copied invert buffer
L-6:  Split window to show copied columnar buffer
L-7:  Split window to show directory names
L-8:  Set split window size
L-9:  Activate next window split

COLUMNAR:
SC-`:  Toggle columnar/regular display mode
SC-1:  Copy and clear hilited columnar data
SC-2:  Space-fill hilited columnar data, overlaying text.  No copy made.
SC-3:  Copy hilited columnar data
SC-4:  Insert copied columnar data at cursor
SC-5:  Overlay copied columnar data at cursor
SC-6:  Insert marked columnar hilite at cursor (no intermediate copy)
SC-7:  Overlay marked columnar hilite at cursor (no intermed copy)

PRINT:
C-p:  Print the hilite region.
A-p:  Select printing port:  parallel, serial, print.dev processed or raw
AC-p: Print file
L-a:  Stop current print
R-a:  Stop all prints
L-s:  Restart current print
SAC-p:  Show printer control code help
L-p:  Printer codes:  Next letter key brackets hilite for boldface, etc
R-g:  Find next printer code (can delete it with C-h)
L-g:  Insert printer code.  (See printer code table for numbers 0-75.)

PAGE:
L-y:  Erase next page number
A-3:  Input page number to go to
L-f:  Insert a formfeed character
L-h:  Go to top of page
L-b:  Go to end of page
L-v:  Insert page-division at cursor
L-d:  Delete next page-division
L-r:  Auto-insert page-divisions and page-numbers in file

SPELL:
R-u:  Load in the speller dictionary files
R-c:  Find bad words starting at cursor (presents optional spellings,ESC=quit).
R-m:  Spell-check from cursor fwd.  Mark bad words with "@".
R-l:  Load suppl dictionary & spell from cursor fwd.  Add to supplement.
R-d:  Merge dict suppl with dict-files.  dict.A-Z must be in Cur Dir.
R-e:  Remove words from dict-files.  dict.A-Z must be in Cur Dir.
R-f:  Free speller files.  (Frees 12k to 165k of memory.)

ARITHMETIC:
C-0:  Set running total to 0
C-\:  Type the running total at cursor
C-=:  Add next word (if number) to total & display total
C--:  Subtract next word (if number) from total & display total

REXX:
AC-1:  Edit Rexx output buf35
AC-2:  Edit Rexx input buf36
AC-3:  Send output buf35 to Rexx
AC-4:  Fetch Rexx input into buf36
AC-5:  Send hilite region to Rexx
AC-6:  Fetch Rexx input at cursor
AC-7:  Send an OK reply to Rexx  (Amiga-ESC abort sends Failed reply.)
AC-8:  Send an OK reply to Rexx along with text in hilite region
AC-9:  Toggle Rexx auto-traffic mode, handles traffic during idle periods
AC-0:  Make an x.rexx program with commands to send to Uedit

MISCELLANEOUS:
C-m:  Set command multiplier to use for next command
C-n:  Input a text line number to go to
A-e:  Change eol character
C-e:  Change current file's eol character
A-c:  Trim spaces between the next two words after cursor
C-c:  Let next character typed be a CTRL-character, such as formfeed, etc
SA-c: Count number of times the next command is successfully run
A-g:  Input a new lines/page value
L-k:  Set left margin
L-u:  Set top margin
L-l:  Set bottom margin
AC-f1:  Set max files can load for editing (1-100, typ. 20)
R-f5: Save Uedit's state to the default state file "uestate".
R-f6  Load the default state file "uestate".
C-return:  Set new lineLength

C-/:  Show the ASCII value of character under cursor
C-1:  Show current file size
C-3:  Reformat cursor paragraph, starting at cursor line
C-4:  Delete all trailing white-space in current file

S-f5:   Toggle overstrike typing mode
A-f5:   Toggle autoindent typing mode
C-f5:   Toggle wordwrap typing mode
A-j:    Toggle right-justify typing mode
L-f5:   Toggle "changed" status of current buffer
SA-f5:  Toggle file read-only status
SAC-f5: Toggle auto-backup mode
SA-m:   Toggle map illegals setting
C-f2:   Toggle save-on-idle flag

SC-f5:  Toggle speak-messages status
AC-f5:  Toggle speak-alerts status
C-2:    Toggle displaying of cursor row-column
C-b:    Toggle "busies" setting, shows buf# being worked on
C-g:    Toggle the mark-gadgets setting
AC-i:   Toggle the "make icons" flag
C-v:    Toggle flag that makes CTRL chars vis/invis

C-l:  Convert character under cursor to lower case and advance cursor
C-f:  Toggle upper/lower case of char under cursor
C-u:  Convert char under cursor to upper case
C-x:  Toggle number under cursor between hex/decimal

C-j:    Join next line to cursor line
C-o:    Open cursor line for typing
S-del:  Open space under cursor for typing
A-del:  Open line for typing below cursor line
S-bs:   Open space for typing in front of current word
A-bs:   Open line for typing above current line
C-bs:   Delete line below cursor line
C-del:  Delete line above cursor line

A-l:  Move hilite to left by one space
A-r:  Move hilite to right by one space
A-1:  Clear leading white space in cursor line
A-2:  Center cursor line.  (Uses current lineLength.)
A-4:  Match indent of cursor line to prev line
A-5:  Right-align cursor line from cursor rightward

SA-mouse: click/drag mouse to put word/phrase into index (C-w to see.)
SA-i:   Scan index buffer (buf41), build index.  (C-w to see.)

SAC-i:  Input idle-timer value (tenths of sec) after which idle cmd run
A-d:    Delay amount of time (tenths of seconds) stored using SA-d
SA-d:   Set delay variable to some value in tenths of seconds
A-8:    Show value of a number variable
A-9:    Set value of a number variable

SA-s:   Sort lines alphabetically

-----------------------------------------------------------------------------
BUFFER CONVENTIONS: ("See buffers" shows you these, if they are not empty.)
buf55-99 = available for user commands
buf50-54 = used for temporary purposes in commands
buf49 = search or grep string          buf48 = replace string
buf47 = copied hilite                  buf46 = copied invert
buf45 = scratch deletes (for Undo)     buf44 = edit-command buffer
buf43 = filenames                      buf42 = HELP
buf41 = used in swapBuf (ctl-w)        buf40 = AmigaDOS command
buf39 = AmigaDOS result                buf38 = directory names
buf37 = copied columnar data           buf36 = Rexx msg/reply input buffer
buf35 = Rexx msg/reply output buffer   MaxFiles-buf34 = available
You can change this convention by editing the Config! file.
-----------------------------------------------------------------------------
NUMBER CONVENTIONS: (These variables are used  by  certain  commands.   Press
alt-8 to see them.  Press alt-9 to set any number to a value.)
n46 = tenths of second to delay        n49 = dollars & cents in running total
n94 = flag used by bookmark commands
-----------------------------------------------------------------------------
