======= MISCELLANEOUS CMDS =======

Set max number of files can load for normal editing (1-100, usually 20)
<altCtl-f1:
    putMsg("Input max # documents allowed (1-100)")
    if (inputNum(n54)) setMaxFiles(n54) >

Set start of hilite region
<shft-buttonDown:
    equateLoc(curFile,sHilite,mouseLoc) refreshDisplay >

Set end of hilite region
<alt-buttonDown:
    equateLoc(curFile,eHilite,mouseLoc) refreshDisplay >

Mark region clicked with mouse
<virtual-buttonDown:
    equateLoc(curFile,atCursor,mouseLoc)
    equateLoc(curFile,eInvert,atCursor)
    equateLoc(curFile,sInvert,atCursor)
    if (eqNum(curFile,38)) equateLoc(buf38,eHilite,sHilite)
    while (mouseDown) inputKey(n54)

    if (is(curFile,eFile) | is(curFile,whiteSpace)) returnFalse

    while (!is(curFile,whiteSpace) & !is(curFile,sFile))
        moveCursor(curFile,sChar)                     .. find start non-white
    if (is(curFile,whiteSpace)) moveCursor(curFile,eChar)
    equateLoc(curFile,sInvert,atCursor)          .. sinvert = start non-white

    while (!is(curFile,whiteSpace) & !is(curFile,eFile))
        moveCursor(curFile,eChar)                       .. find end non-white
    equateLoc(curFile,eInvert,atCursor)            .. einvert = end non-white
    if (eqNum(curFile,38)) {                        .. in directory buffer 38
        equateLoc(curFile,sHilite,sInvert)
        equateLoc(curFile,eHilite,eInvert)
        equateLoc(curFile,sInvert,eInvert)
        moveCursor(curFile,sHilite)
    }
    refreshDisplay
>

Load File or select Directory that is CTRL-clicked.
<ctl-buttonDown:
    equateNum(n7,curFile)
    if (!runKey(virtual-buttonDown)) { runKey(virtual-buttonUp) return }
    if (!eqNum(curFile,38)) {
        if (geLoc(curFile,sInvert,eInvert)) return                  .. no rgn
        moveCursor(curFile,sChar)
        if (!is(curFile,"/") & !is(curFile,":")) {
            freeBuf(buf54)
            moveCursor(curFile,sInvert)
            while (!eqLoc(curFile,atCursor,eInvert)) {
                if (is(curFile,":")) goto label(99)
                moveCursor(curFile,eChar)
            }
            insertRgn(buf54,sFile,buf38,hilite)
label(99)
            insertRgn(buf54,eFile,curFile,invert)
            loadFile(buf54)
            return
        }
        moveCursor(curFile,eInvert)
        freeBuf(buf53)
        insertRgn(buf53,eFile,curFile,invert)
        runKey(virtual-7)                                 .. add dir to buf38
    }
    runKey(virtual-9)                                         .. show dir msg
    return
>

Handle buf38 directory traffic
<virtual-buttonUp:
    runKey(virtual-8)                    .. load in dir defalts if not loaded
    equateLoc(buf38,mouseLoc,atCursor)
    equateNum(n8,0)
    if (!eqNum(curFile,38) & !gotoSplit(buf38)) {
        if (!splitWindow(buf38,7)) {
            putMsg("Close a split window so can let you select Directory")
            return
        }
        equateNum(n8,1)                           .. had to make split window
    }
    updateDisplay
label(98)
    equateLoc(buf38,mouseLoc,sFile)
    putMsg(
    "Ctrl-mouse=SelectDir.  F1=Edit.  F2=DirList.  F3=Save.  F4=ChgDir.  F5=CD.")

    while (mouseDown) inputKey(n54)
    getKeyVal(macroNum,inputChar)
    switch(macroNum) {
        case(normal-buttonDown) {                   .. done bring down window
            gotoSplit(buf[n7])
            if (eqNum(n8,1)) splitWindow(buf38,0)      .. close it if made it
            runKey(virtual-9)
            return
        }
        case(normal-f1) {                                       .. edit buf38
            putMsg("Press left-Amiga-0 to elim split window.")
            return
        }
        case(ctl-buttonDown) {
            runkey(virtual-buttonDown)
            refreshDisplay
            runKey(virtual-9)
            delay(3)
        }
        case(normal-f2) {                                     .. get dir list
            gotoSplit(buf[n7])
            if (eqNum(n8,1)) splitWindow(buf38,0)      .. close it if made it
            if (newFile) {
                setFileName(curFile,"DirList")
                clearRgn(curFile,all)
                insertRgn(curFile,atCursor,buf38,hilite)
                insertChar(curFile,eLine)
                equateLoc(curFile,sPage,sFile)
                updateDisplay
                freeBuf(buf54)
                insertRgn(buf54,eFile,"dir ",all)
                insertRgn(buf54,eFile,buf38,hilite)
                execute(curFile,buf54)

                                                          .. massage dir list
                getSearch(buf49)
                setSearch(" (dir)")
                moveCursor(curFile,sFile)
                while (search(curFile,locA,locB,1)) {
                    clearRgn(curFile,loc)
                    insertChar(curFile,"/")
                    moveCursor(curFile,sLine)
                    moveCursor(curFile,eWord)
                    moveCursor(curFile,sWord)
                    insertRgn(curFile,atCursor,buf38,hilite)
                }
                setSearch(buf49)                     .. restore search string
                moveCursor(curFile,sFile)
                flipFlag(curFile,changed)
                putMsg("Ctl-click dirnames to add, filenames to load.")
                return
            } else putMsg("Can't open file buf for dir list")
        }
        case(normal-f3) { saveFile(buf38) }
        case(normal-f4) {                                       .. change dir
            if (gtLoc(buf38,eHilite,sHilite)) {
                freeBuf(buf54)
                insertRgn(buf54,eFile,buf38,hilite)
                changeDir(buf54)
                goto label(0)
            }
        }
        case(normal-f5) {                                           .. get CD
label(0)    freeBuf(buf53)
            execute(buf53,"CD")
            freeBuf(buf54)
            insertRgn(buf54,eFile,"CD = ",all)
            insertRgn(buf54,eFile,buf53,line)
            putMsg(buf54)
            delay(5)
        }
    }
    goto label(98)
>

Click or drag mouse, put word/phrase into index in buf41.  (Ctl-w to see.)
<shftAlt-buttonDown:
    equateLoc(curFile,atCursor,mouseLoc)
    moveCursor(curFile,eWord)
    equateLoc(curFile,eInvert,atCursor)
    moveCursor(curFile,sWord)
    equateLoc(curFile,sInvert,atCursor)
    refreshDisplay >

Click or drag mouse, put word/phrase into index in buf41.  (Ctl-w to see.)
<shftAlt-buttonUp:
    equateLoc(curFile,atCursor,mouseLoc)
    moveCursor(curFile,eWord)
    equateLoc(curFile,eInvert,atCursor)
    if (geLoc(curFile,sInvert,eInvert)) returnFalse
    moveCursor(curFile,sInvert)
    if (is(curFile,upperCase)) equateNum(n0,1)
    else equateNum(n0,0)
    toLower(curFile)
    copyChar(curFile,n54)
    if (eqNum(n0,1)) toUpper(curFile)
    if (isEmpty(buf41)) insertChar(buf41,eLine)
    moveCursor(buf41,sFile)
    equateLoc(buf41,sPage,atCursor)
label(1)
    if (is(buf41,upperCase)) equateNum(n0,1)
    else equateNum(n0,0)
    toLower(buf41)
    copyChar(buf41,n53)
    if (eqNum(n0,1)) toUpper(buf41)
    if (gtNum(n54,n53)) {
        moveCursor(buf41,downLine)
        if (!is(buf41,eFile)) goto label(1)
    }
    insertRgn(buf41,atCursor,curFile,invert)
    insertChar(buf41,eLine)
>

Set start of invert region
<shftCtl-buttonDown:
    equateLoc(curFile,sInvert,mouseLoc) refreshDisplay >

Set end of invert region
<altCtl-buttonDown:
    equateLoc(curFile,eInvert,mouseLoc) refreshDisplay >

Drag mouse and create hilite region
<shftAltCtl-buttonDown:
    equateLoc(curFile,locA,mouseLoc)
    while (trackMouse) nothing
    if (gtLoc(curFile,locA,mouseLoc)) {
        equateLoc(curFile,sHilite,mouseLoc)
        equateLoc(curFile,eHilite,locA)
    } else {
        equateLoc(curFile,eHilite,mouseLoc)
        equateLoc(curFile,sHilite,locA)
    }
    refreshDisplay >

Adjust active split window size with mouse
<lAmiga-=:
    getSplitLines(n53,n52)                           .. see if is upper split
    if (eqNum(n53,0)) {
        putMsg("Adjust lower splits, not top one")
        returnFalse                                 .. don't size main window
    }
    putMsg("Press button, move mouse to set split window size")
    getkey(N54)
    if (!mouseDown) return
    trackMouse
    mouseXY(n4,n5)
    equateNum(n54,curFile)
label(0)
    if (inputWaiting) { putMsg(" ") return }
    trackMouse
    mouseXY(n2,n3)
    getSplitLines(n53,n52)                                .. get start & stop
    sub(n52,n52,n53)
    if (gtNum(n5,n3)) {
        if (gtNum(n53,3)) incNum(n52)
        else goto label(0)
    }
    else if (gtNum(n3,n5)) decNum(n52)
    else goto label(0)
    if (!eqNum(n5,n3)) {
        splitWindow(curFile,0)
        if (gtNum(2,n52)) equateNum(n52,2)
        splitWindow(buf[n54],n52)
        updateDisplay
        equateNum(n5,n3)
    }
    goto label(0)
    >

Scroll up 1 line
<normal-upArrow:
    if (!thisKey) vScroll(-1)
    else while (nothing) {
        if (!vScroll(-1) | !inputWaiting) return
        while (inputKey(n54)) nothing
        vScroll(-3)
        updateDisplay
    } >

Scroll down 1 line
<normal-downArrow:
    if (!thisKey) vScroll(1)
    else while (nothing) {
        if (!vScroll(1) | !inputWaiting) return
        while (inputKey(n54)) nothing
        vScroll(3)
        updateDisplay
    } >

Scroll right 1 char
<normal-leftArrow: hScroll(1) >

Scroll left 1 char
<normal-rightArrow: hScroll(-1) >

Scroll up 11 lines
<shft-upArrow: vScroll(-11) >

Scroll down 11 lines
<shft-downArrow: vScroll(11) >

Scroll right 10 chars
<shft-leftArrow: hScroll(10) >

Scroll left 10 chars
<shft-rightArrow: hScroll(-10) >

Scroll to start of page
<alt-upArrow: vScroll(sPage) >

Scroll to bottom of page
<alt-downArrow: vScroll(ePage) >

Scroll right 20 chars
<alt-leftArrow: hScroll(20) >

Scroll left 20 chars
<alt-rightArrow: hScroll(-20) >

Scroll to start of file
<ctl-upArrow: vScroll(sFile) >

Scroll to end of file
<ctl-downArrow: vScroll(eFile) >

Scroll to end of line
<ctl-leftArrow:
    getLocal(curFile,n54,lineLength)
    hScroll(n54) >

Scroll to start of line
<ctl-rightArrow: while (hScroll(-1)) nothing >

Load and show help file - press again to release help
<normal-help:
    if (!isEmpty(buf42)) {
                   equateNum(n54,curFile)
                   if (eqNum(n54,42)) freeBuf(buf42)
                   else editBuf(buf42)
    } else {
        insertFile(buf42,sFile,"Help!")
        if (isEmpty(buf42)) {
            freeBuf(buf42)
            insertFile(buf42,sFile,"S:Help!")
        }
        if (!isEmpty(buf42)) {
            editBuf(buf42)
            flipFlag(buf42,readOnly)
        } else putMsg("Can't find S:Help! file.")
    } >

Show current values of line-length, lines/page, tab-table #, colors, etc
<shft-help:
    putMsg(" ")
    equateLoc(curfile,locA,atCursor)
    moveCursor(curfile,sFile)
    moveCursor(curfile,eLine)
    copyChar(curfile,n52)
    moveCursor(curfile,locA)
    updateDisplay
    equateNum(n51,curFile)
    text(" ",0,0,0,-2)
    text("Serial number:                       Left margin     :",2,0,0,0)
    text("Buffer       :                       Top margin      :",3,0,0,0)
    text("Changed      :                       Bottom margin   :",4,0,0,0)
    text("Size         :                       Tab table       :",5,0,0,0)
    text("Max files    :                       Printer select  :",6,0,0,0)
    text("Split size   :                       (unused)        :",7,0,0,0)
    text("Idle timer   :                       Print tabs      :",8,0,0,0)
    text("Colors       :                       Smart tabs      :",9,0,0,0)
    text("Scroll type  :                       Search wildcard :",10,0,0,0)
    text("Hide display :                       \"\"    multiWild :",11,0,0,0)
    text("End-of-line  :                       \"\"       allBut :",12,0,0,0)
    text("PM terminator:                       \"\"     eitherOr :",13,0,0,0)
    text("Line length  :                       \"\"  singleWhite :",14,0,0,0)
    text("Lines/page   :                       \"\"   multiWhite :",15,0,0,0)
    text("Values for this buffer",1,0,5,0)
    getSerialNum(n54)
    text(n54,2,16,1,0)
    getLocal(curFile,n54,leftMargin)
    text(n54,2,56,1,0)
    text(n51,3,16,1,0)                                        ..buffer number
    getLocal(curFile,n54,topMargin)
    text(n54,3,56,1,0)
    if (getFlag(curFile,changed)) text("YES",4,16,2,0)
    else text("no",4,16,1,0)
    getLocal(curFile,n54,bottomMargin)
    text(n54,4,56,1,0)
    getLocal(curFile,n54,tabTable)    .. SEE BELOW - computing file size last
    text(n54,5,56,1,0)
    getMaxFiles(n54)
    text(n54,6,16,1,0)
    text(prefPrint,6,56,1,0)
    text(splitSize,7,16,1,0)
    text(0,7,56,1,0)
    text(idleTime,8,16,1,0)
    text(printTabs,8,56,1,0)
    freeBuf(buf53)
    getWBColors(n0,n1,n2,n3)
    toWord(buf53,n0)
    toWord(buf53,n1)
    toWord(buf53,n2)
    toWord(buf53,n3)
    text(buf53,9,16,1,0)
    text(smartTabs,9,56,1,0)
    text(scrollType,10,16,1,0)
    freeBuf(buf53)
    insertChar(buf53,wildCard)
    text(buf53,10,56,1,0)
    if (getFlag(curFile,hideDisplay)) text("YES",11,16,2,0)
    else text("no",11,16,1,0)
    freeBuf(buf53)
    insertChar(buf53,multiWild)
    text(buf53,11,56,1,0)
    text(n52,12,16,1,0)                               .. eol, copied it above
    freeBuf(buf53)
    insertChar(buf53,allBut)
    text(buf53,12,56,1,0)
    text(pmESC,13,16,1,0)
    freeBuf(buf53)
    insertChar(buf53,eitherOr)
    text(buf53,13,56,1,0)
    getLocal(curFile,n54,lineLength)
    text(n54,14,16,1,0)
    text(singleWhite,14,56,1,0)
    getLocal(curFile,n54,pageLines)
    text(n54,15,16,1,0)
    text(multiWhite,15,56,1,0)
    putMsg("Any key to continue")
    fileSize(curFile,n54)
    text(n54,5,16,1,0)
    getKey(n54)
    putMsg(" ")
    refreshDisplay >

Rotate 4 Workbench colors in Uedit
<alt-help: toggle(color) >

Start this Key-Help mode - press Amiga-ESC to leave this Key-Help mode
<ctl-help: flipFlag(curFile,teachKeys) >

Refresh window (or screen in interlace), including title bar
<shftCtl-help: refreshDisplay >

Rebuild the menus by running the startup command
<shftAltCtl-Help: runKey(startup) >

Close file.  If changed, ask "Save changes?"  If no files, ask "Really quit?"
<normal-closeBox:
    if (getFlag(curfile,changed) &
        askYesNo("Save changes?") &
            !saveFile(curFile)) return
    freeBuf(curFile)
    if (isEmpty(curFile)) {
        equateNum(n1,0)
        getMaxFiles(n2)
        decNum(n2)
        do (n0,0,n2) if (!isEmpty(buf[n0])) equatenum(n1,1)
        if (eqNum(n1,0) & askYesNo("Really quit?")) quit(0)
    } >

Switch to next document
<normal-gadget1: toggle(curFile) >

Switch to previous document
<normal-gadget2: runKey(shft-f1) >

Scroll display down
<normal-gadget3: while (mouseDown) { vScroll(downLine) updateDisplay } >

Scroll display up
<normal-gadget4: while (mouseDown) { vScroll(upLine)   updateDisplay } >

Switch to next file
<normal-f1: toggle(curFile) >

Switch to previous file
<shft-f1:
    getMaxFiles(n53)
    if (geNum(1,n53)) { editBuf(buf0) returnFalse }
    decNum(n53)
    equateNum(n54,curFile)
    while (nothing) {
        if (gtNum(n54,n53)) equateNum(n54,n53)
        decNum(n54)
        if (gtNum(0,n54)) equateNum(n54,n53)
        if (getFileName(buf54,buf[n54])) {
            editBuf(buf[n54])
            returnTrue
        }
    } >

Load a file
<alt-f1:
    putMsg("Input new filename:")
    freeBuf(buf43)
    if (inputString(buf43)) loadFile(buf43) >

Open new "Noname" file
<ctl-f1: newFile >

Insert file at cursor
<shftAlt-f1:
    putMsg("Input filename to insert:")
    freeBuf(buf43)
    if (inputString(buf43)) insertFile(curFile,atCursor,buf43) >

Restore current file to original
<shftCtl-f1:
    if (!askYesNo("Restore file to original?")) returnFalse
    if (getFileName(buf43,curFile)) { freeBuf(curFile) loadFile(buf43) } >

Bring up file-requester
<lAmiga-f1:
    freeBuf(buf54)
    insertRgn(buf54,eFile,buf38,hilite)
    moveCursor(buf54,efile)
    moveCursor(buf54,sChar)
    if (!is(buf54,sfile) & is(buf54,"/")) clearChar(buf54)
    if (fileRequest(buf54, "      Select Directory and/or File     ")) {
        freeBuf(buf53)                         .. if True, always has 2 lines
        insertRgn(buf53,efile,buf54,all)
        moveCursor(buf53,sfile)
        if (!is(buf53,eline)) moveCursor(buf53,eLine)
        clearChar(buf53)                                     .. erase the eol
        loadFile(buf53)
    }
    if (isEmpty(buf54)) {
        putMsg("No selection or no Arp")
        returnFalse
    }
    moveCursor(buf54,sfile)    .. puts filename on line 2.  outputs "*" if no
    if (!is(buf54,"*") & !is(buf54,eLine)) {
        freeBuf(buf53)
        insertRgn(buf53,efile,buf54,line)
        runKey(virtual-7)     .. store dirname in buf38, if not already there
    }
>

Save file currently in window
<normal-f2: saveFile(curFile) >

Save file under different name
<shft-f2:
    putMsg("Save file as:")
    freeBuf(buf43)
    if (inputString(buf43) & setFileName(curFile,buf43)) saveFile(curFile) >

Save all changed files
<alt-f2:
    getMaxFiles(n53)
    decNum(n53)
    do(n54,0,n53) if (getFlag(buf[n54],changed)) saveFile(buf[n54]) >

Turn on/off saving changes during idle periods
<ctl-f2: flipFlag(curFile,userLocalA)>

Abort the current file save
<shftAlt-f2: abortSave >

Save hilite as...
<shftCtl-f2:
    freeBuf(buf43)
    insertRgn(buf43,atCursor,buf38,hilite)
    putMsg("Save hilite as:")
    if (!inputString(buf43)) return
    freeBuf(buf54)
    insertRgn(buf54,efile,curFile,hilite)
    setFileName(buf54,buf43)
    saveFile(buf54)
    freeBuf(buf54) >

Close current file.  If changed, ask "Save changes?"
<normal-f3:
    if (!isEmpty(curFile)
        & getFlag(curFile,changed)
        & askYesNo("Save changes before closing?")
        & !saveFile(curFile)) returnFalse
    freeBuf(curFile) >

Save file, if changed, then close it
<shft-f3:
    if (getFlag(curFile,changed) & !saveFile(curFile)) returnFalse
    freeBuf(curFile) >

Free all non-file buffers.  Erases search buffer, directory name, etc
<alt-f3:
    getMaxFiles(n52)
    do(n54,n52,54) freeBuf(buf[n54]) >

Ask "Save changes?", if any changes, then ask "Really quit?"
<normal-f4:
    if (!askYesNo("Really quit?")) returnFalse
    equateNum(n53,0)
    getMaxFiles(n52)
    decNum(n52)
    do(n54,0,n52) if (getFlag(buf[n54],changed)) equateNum(n53,1)
    if (eqNum(n53,1) & askYesNo("Save changes?") & !runKey(shft-f4))
        returnFALSE
    quit(0) >

Save all changed files automatically, then quit
<shft-f4:
    getMaxFiles(n52)
    decNum(n52)
    do (n54,0,n52)
    if (getFlag(buf[n54],changed) & !saveFile(buf[n54])) returnFalse
    quit(0) >

Swap next 2 commands. (Mouse buttons, menu selections, gadgets, keys.)
<normal-f5:
    putMsg("Next 2 function keys will be swapped!")
    if (getKey(n53) & getKey(n54) & swapKey(n53,n54))
            { putMsg("Keys were swapped.") return }
    putMsg(" ") >

Toggle overstrike typing mode
<shft-f5: flipFlag(curFile,overstrike) >

Toggle autoindent typing mode
<alt-f5: flipFlag(curFile,autoIndent) >

Toggle wordwrap typing mode
<ctl-f5: flipFlag(curFile,wordWrap) >

Toggle "changed" status of current buffer
<lAmiga-f5: flipFlag(curFile,changed) >

Convert file to read-only status
<shftAlt-f5: flipFlag(curFile,readOnly) >

Toggle speak-messages status
<shftCtl-f5: flipFlag(curFile,speakMsgs) >

Toggle speak-alerts status
<altCtl-f5: flipFlag(curFile,speakAlerts) >

Toggle auto-backup mode
<shftAltCtl-f5: flipFlag(curFile,autoBackup) >

Select buffer 44 to use for scratch editing or writing commands
<shft-f6:
    editBuf(buf44)
    putMsg("Type in command, <anykey: etc>, and press F6 to compile:") >

Save UE config to disk.  Default is Data! or last name you gave
<alt-f6:
    if (askYesNo("Save data?")) {
        putMsg("Input data filename or pmESC:")
        freeBuf(buf54)
        inputString(buf54)
        saveConfig(buf54)
    } >

Restore UE config from disk.  Default is Data! or last name you gave
<ctl-f6:
    if (askYesNo("Load data?")) {
        putMsg("Input data filename or pmESC:")
        freeBuf(buf54)
        inputString(buf54)
        loadConfig(buf54)
    } >

Compile configuration default values at the top of Config! file
<altCtl-f6:
    moveCursor(curFile,sFile)
    if (!compileDefaults) beepDisplay>

Input the number of a buffer to edit
<shftAlt-f6:
    putMsg("Input number of buffer to edit:")
    if (inputNum(n54)) { editBuf(buf[n54]) vScroll(sFile) } >

Examine all buffers that aren't empty
<shftCtl-f6:
    getMaxFiles(n52)
    do (n54,n52,99) if (!isEmpty(buf[n54])) {
        editBuf(buf[n54])
        vScroll(sFile)
        updateDisplay
        putMsg("F1=continue, F2=edit this one, F3=stop:")
        getKey(n53)
        if (eqNum(n53,normal-f2)) { putMsg(" ") return }
        if (eqNum(n53,normal-f3)) goto label(1)
    }
    label(1)
    toggle(curFile)
    putMsg(" ") >

Kill next command, including mouse button, menu selection, gadget, key
<shftAltCtl-f6:
    putMsg("Next command-key will be deleted!")
    if (getKey(n54) & killKey(n54))
            { putMsg("Key command was deleted.") return }
    putMsg(" ") >


Find out if keys have got commands attached
<lAmiga-f6:
    putMsg("Press any key")
    while (getKey(n54)) {
        if (inUse(n54)) putMsg("In use - Amiga-esc=abort")
        else putMsg("Available - Amiga-esc=abort")
    }>

Push current buffer onto buffer stack
<lAmiga-w: push(curFile) runKey(virtual-w)  >

Pop buffer stack
<rAmiga-w:
    getStackSize(n51,n52,n53)
    if (geNum(0,n51)) {
        putMsg("Buffer stack is empty")
        returnFalse
    }
    if (!askYesNo("Replace current buffer, deleting old?") & !newFile) {
        putMsg("Can't open a file buffer")
        returnFalse
    }
    pop(curFile)
    runKey(virtual-w) >

Rotate buffer stack
<shftAlt-w: rollStack(curFile,1) runKey(virtual-w) >

Show number of buffers in stack
<virtual-w:
    getStackSize(n51,n52,n53)
    freeBuf(buf54)
    insertRgn(buf54,atCursor,"Buffers on stack: ",all)
    toWord(buf54,n51)
    putMsg(buf54)  >

Input search text & search fwd.  (Either-Or="$", wildcards= "?" & "*".)
<normal-f7: freeBuf(buf49) runKey(shft-f7) >

Modify existing search text and then search fwd
<shft-f7:
    putMsg("Input search string:")
    inputString(buf49)
    setSearch(buf49)
    runKey(normal-f9) >

Input new search wild-card characters
<alt-f7:
    putMsg("Input single wild-card char:")
    getChar(wildCard)
    putMsg("Input multi wild-card char:")
    getChar(multiWild)
    putMsg("White on single wildcards: 0=no, 1=space/tab, 2=all white:")
    getChar(n54)
    if (geNum(n54,"0") & geNum("2",n54)) sub(singleWhite,n54,"0")
    putMsg("White on multi wildcards: 0=no, 1=space/tab, 2=all white:")
    getChar(n54)
    if (geNum(n54,"0") & geNum("2",n54)) sub(multiWhite,n54,"0")
    putMsg("Input all-but delimiter char:")
    getChar(allBut)
    putMsg(" ")>

Input new search either-or character
<ctl-f7:
    putMsg("Input new search either-or char:")
    getChar(eitherOr)
    putMsg(" ")>

Input replace text to use in search-replace
<normal-f8: freeBuf(buf48) runKey(shft-f8) >

Modify existing replace text
<shft-f8: putMsg("input replace string:") inputString(buf48) >

Search forward, mark matched region, put cursor at start of rgn
<normal-f9:
    if (eqLoc(curFile,atCursor,eInvert)) moveCursor(curFile,sChar)
    if (search(curFile,sInvert,eInvert,1)) {
      putMsg(" ")
      return
    }
    runKey(virtual-f9) >                                 .. failed search msg

Search backward, mark matched region, put cursor at start of rgn
<shft-f9:
    if (search(curFile,sInvert,eInvert,-1)) { putMsg(" ") return }
    runKey(virtual-f9) >                                 .. failed search msg

Failed search message used by fwd/bkwd search.
<virtual-f9:
    putMsg("Search failed.")
    equateLoc(curFile,sInvert,eInvert)
    refreshDisplay
    returnFalse >

Replace matched region with replace text, then search forward
<normal-f10:
    if (eqLoc(curFile,sInvert,eInvert)) returnFalse
    clearRgn(curFile,invert)
    insertRgn(curFile,sInvert,buf48,all)
    runKey(normal-f9) >

Replace matched region with replace text, then search backward
<shft-f10:
    if (eqLoc(curFile,sInvert,eInvert)) returnFalse
    clearRgn(curFile,invert)
    insertRgn(curFile,sInvert,buf48,all)
    runKey(shft-f9) >

Replace and continue forward search-replace until search fails
<alt-f10: while(runKey(normal-f10)) nothing >

Open a space under cursor for typing
<shft-del:
    insertChar(curFile," ") moveCursor(curFile,sChar)
    if (is(curFile,sLine)) refreshDisplay>

Open line for typing below cursor line
<alt-del:
    if (!is(curFile,eLine)) moveCursor(curFile,eLine)
    insertChar(curFile,eLine)>

Delete line above cursor line
<ctl-del:
    equateLoc(curFile,mouseLoc,atCursor)
    if (!is(curFile,sLine)) moveCursor(curFile,sLine)
    if (!is(curFile,sFile)) {
        moveCursor(curFile,upLine)
        runKey(virtual-x)                                  .. this runs ctl-d
        moveCursor(curFile,mouseLoc)
    }>

Open a space for typing in front of current word
<shft-bs:
    if (!is(curFile,sWord)) moveCursor(curFile,sWord)
    runKey(shft-del)>

Open line for typing above the current line
<alt-bs:
    if (!is(curFile,sLine)) moveCursor(curFile,sLine)
    insertChar(curFile,eLine)  moveCursor(curFile,sChar)>

Delete line below cursor line
<ctl-bs:
    equateLoc(curFile,mouseLoc,atCursor)
    if (!is(curFile,eLine)) moveCursor(curFile,eLine)
    if (!is(curFile,eFile)) {
        moveCursor(curFile,downLine)
        runKey(virtual-x)                                  .. this runs ctl-d
        moveCursor(curFile,mouseLoc)
    }>

                            *** Keypad Keys ***
Find cursor and center it in window
<normal-kp5: vScroll(atCursor) >

Delete word left, storing it in Undo buffer
<normal-kp7:
    if (!eqLoc(curFile,locB,atCursor)) freeBuf(buf45)
    equateLoc(curFile,locB,atCursor)
    moveCursor(curFile,sWord)
    equateLoc(curFile,locA,atCursor)
    insertRgn(buf45,sFile,curFile,loc)
    equateLoc(buf45,sPage,sFile)
    clearRgn(curFile,loc) >

Delete word right, storing it in Undo buffer
<normal-kp9:
    if (!eqLoc(curFile,locB,atCursor)) freeBuf(buf45)
    equateLoc(curFile,locA,atCursor)
    moveCursor(curFile,eWord)
    equateLoc(curFile,locB,atCursor)
    insertRgn(buf45,eFile,curFile,loc)
    equateLoc(buf45,sPage,sFile)
    clearRgn(curFile,loc) >

Move cursor up 1 line
<normal-kp8: moveCursor(curFile,upLine) >

Move cursor down 1 line
<normal-kp2: moveCursor(curFile,downLine) >

Move cursor to start of word
<normal-kp4: moveCursor(curFile,sWord) >

Move cursor to end of word
<normal-kp6: moveCursor(curFile,eWord) >

Set start of hilite region at cursor
<normal-kp1: equateLoc(curFile,sHilite,atCursor) refreshDisplay >

Set end of hilite region at cursor
<normal-kp3: equateLoc(curFile,eHilite,atCursor) refreshDisplay >

UNDO scratch deletes, inserting scratch delete buffer at cursor
<normal-kp0: insertRgn(curFile,atCursor,buf45,all) >

Copy hilite region into buffer
<normal-kpDot:
    if (getFlag(curFile,columnar)) { runKey(shftCtl-3) return }
    if (gtLoc(curFile,eHilite,sHilite)) {
        freeBuf(buf47)
        insertRgn(buf47,sFile,curFile,hilite)
        equateLoc(buf47,sPage,sFile)
    } else returnFalse >

Copy hilite region into buffer, then delete hilite region
<normal-kpMinus:
    if (getFlag(curFile,columnar)) { runKey(shftCtl-1) return }
    if (runKey(normal-kpDot)) clearRgn(curFile,hilite) >

Insert copied hilite at cursor
<normal-kpEnter:
    if (getFlag(curFile,columnar)) { runKey(shftCtl-4) return }
    if (is(curFile,sFile)) {
        equateLoc(curFile,sHilite,atCursor)
        equateLoc(curFile,eHilite,sHilite)
    } else {
        equateLoc(curFile,sHilite,atCursor)
        decLoc(curFile,sHilite)
        equateLoc(curFile,eHilite,atCursor)
    }
    insertRgn(curFile,atCursor,buf47,all)
    if (eqLoc(curFile,atCursor,sHilite)) equateLoc(curFile,sHilite,sFile)
    else incLoc(curFile,sHilite)
    if (!onScreen(atCursor)) vScroll(atCursor) >

Find cursor and center it in window
<shft-kp5: vScroll(atCursor) >

Delete char to left of cursor, storing it in Undo buffer
<shft-kp7:
    if (!eqLoc(curFile,locB,atCursor)) freeBuf(buf45)
    equateLoc(curFile,locB,atCursor)
    moveCursor(curFile,sChar)
    equateLoc(curFile,locA,atCursor)
    insertRgn(buf45,sFile,curFile,loc)
    equateLoc(buf45,sPage,sFile)
    clearRgn(curFile,loc) >

Delete char under cursor, storing it in Undo buffer
<shft-kp9:
    if (!eqLoc(curFile,locB,atCursor)) freeBuf(buf45)
    equateLoc(curFile,locA,atCursor)
    moveCursor(curFile,eChar)
    equateLoc(curFile,locB,atCursor)
    insertRgn(buf45,eFile,curFile,loc)
    equateLoc(buf45,sPage,sFile)
    clearRgn(curFile,loc) >

Move cursor up one line
<shft-kp8: moveCursor(curFile,upLine) >

Move cursor down one line
<shft-kp2: moveCursor(curFile,downLine) >

Move cursor left 1 char
<shft-kp4: moveCursor(curFile,sChar) >

Move cursor right 1 char
<shft-kp6: moveCursor(curFile,eChar) >

Set start of hilite region at cursor
<shft-kp1: runKey(normal-kp1) >

Set end of hilite region at cursor
<shft-kp3: runKey(normal-kp3) >

UNDO scratch deletes, inserting scratch delete buffer at cursor
<shft-kp0: runKey(normal-kp0) >

Copy hilite region into buffer
<shft-kpDot: runKey(normal-kpDot) >

Copy hilite region into buffer, then delete hilite region
<shft-kpMinus: runKey(normal-kpMinus) >

Insert copied hilite region at cursor
<shft-kpEnter: runKey(normal-kpEnter) >

Find cursor and center it in window
<alt-kp5: vScroll(atCursor) >

Delete to start of line, storing it in Undo buffer
<alt-kp7:
    if (!eqLoc(curFile,locB,atCursor)) freeBuf(buf45)
    if (is(curFile,sLine)) runKey(shft-kp7)
    else {
        equateLoc(curFile,locB,atCursor)
        moveCursor(curFile,sLine)
        equateLoc(curFile,locA,atCursor)
        insertRgn(buf45,sFile,curFile,loc)
        equateLoc(buf45,sPage,sFile)
        clearRgn(curFile,loc)
    } >
Delete to end of line, storing it in Undo buffer
<alt-kp9:
    if (!eqLoc(curFile,locB,atCursor)) freeBuf(buf45)
    if (is(curFile,eLine)) runKey(shft-kp9)
    else {
        equateLoc(curFile,locA,atCursor)
        moveCursor(curFile,eLine)
        equateLoc(curFile,locB,atCursor)
        insertRgn(buf45,eFile,curFile,loc)
        equateLoc(buf45,sPage,sFile)
        clearRgn(curFile,loc)
    } >

Move cursor to start of page
<alt-kp8: moveCursor(curFile,sPage) vScroll(atCursor)>

Move cursor to end of page
<alt-kp2: moveCursor(curFile,ePage) >

Move cursor to start of line
<alt-kp4: moveCursor(curFile,sLine) >

Move cursor to end of line
<alt-kp6: moveCursor(curFile,eLine) >

Set start of hilite region at cursor
<alt-kp1: runKey(normal-kp1) >

Set end of hilite region at cursor
<alt-kp3: runKey(normal-kp3) >

UNDO scratch deletes, inserting scratch delete buffer at cursor
<alt-kp0: runKey(normal-kp0) >

Copy hilite region into buffer
<alt-kpDot: runKey(normal-kpDot) >

Copy hilite region into buffer, then delete hilite region
<alt-kpMinus: runKey(normal-kpMinus) >

Insert copied hilite region at cursor
<alt-kpEnter: runKey(normal-kpEnter) >

Find cursor and center it in window
<ctl-kp5: vScroll(atCursor) >

Delete from cursor to start of page, storing it in Undo buffer
<ctl-kp7:
    if (!eqLoc(curFile,locB,atCursor)) freeBuf(buf45)
    equateLoc(curFile,locB,atCursor)
    moveCursor(curFile,sPage)
    equateLoc(curFile,locA,atCursor)
    insertRgn(buf45,sFile,curFile,loc)
    equateLoc(buf45,sPage,sFile)
    clearRgn(curFile,loc)
    vScroll(atCursor)
    updateDisplay >

Delete from cursor to end of page, storing it in Undo buffer
<ctl-kp9:
    if (!eqLoc(curFile,locB,atCursor)) freeBuf(buf45)
    equateLoc(curFile,locA,atCursor)
    moveCursor(curFile,ePage)
    equateLoc(curFile,locB,atCursor)
    insertRgn(buf45,eFile,curFile,loc)
    equateLoc(buf45,sPage,sFile)
    clearRgn(curFile,loc)
    updateDisplay >

Move cursor to start of form
<ctl-kp8: moveCursor(curFile,sForm) >

Move cursor to end of form
<ctl-kp2: moveCursor(curFile,eForm) >

Move cursor to start of line
<ctl-kp4: moveCursor(curFile,sLine) >

Move cursor to end of line
<ctl-kp6: moveCursor(curFile,eLine) >

Set start of invert region at cursor
<ctl-kp1: equateLoc(curFile,sInvert,atCursor) refreshDisplay >

Set end of invert region at cursor
<ctl-kp3: equateLoc(curFile,eInvert,atCursor) refreshDisplay >

UNDO scratch deletes, inserting scratch delete buffer at cursor
<ctl-kp0: runKey(normal-kp0) >

Give message telling turn OFF columnar if columnar is ON.
<virtual-kpDot:
    if (getFlag(curFile,columnar)) {
        alertuser("Turn OFF columnar display mode first. (See Columnar menu.)")
        abort
    } >

Copy invert region into buffer
<ctl-kpDot:
    runKey(virtual-kpDot)
    if (gtLoc(curFile,eInvert,sInvert)) {
        freeBuf(buf46)
        insertRgn(buf46,sFile,curFile,invert)
        equateLoc(buf46,sPage,sFile)
    } else returnFalse >

Copy invert region into buffer, then delete invert region
<ctl-kpMinus:
    runKey(virtual-kpDot)
    runKey(ctl-kpDot)
    clearRgn(curFile,invert) >

Insert copied invert region at cursor
<ctl-kpEnter:
    runKey(virtual-kpDot)
        if (is(curFile,sFile)) {
            equateLoc(curFile,sInvert,atCursor)
            equateLoc(curFile,eInvert,sInvert)
        } else {
            equateLoc(curFile,sInvert,atCursor)
            decLoc(curFile,sInvert)
            equateLoc(curFile,eInvert,atCursor)
        }
        insertRgn(curFile,atCursor,buf46,all)
        if (eqLoc(curFile,atCursor,sInvert)) equateLoc(curFile,sInvert,sFile)
        else incLoc(curFile,sInvert)
        if (!onScreen(atCursor)) vScroll(atCursor) >

                        *** miscellaneous keys ***

Set new line-length
<ctl-return:
    putMsg("Enter new line-length:")
    if (inputNum(n54)) {
        setLocal(curFile,lineLength,n54)
        equateNum(lineLength,n54)
    } >

Transparent tab forward
<shft-tab: moveCursor(curFile,eTab) >

Transparent tab backward
<alt-tab: moveCursor(curFile,sTab) >

Untab - delete white space back to previous tab column
<ctl-tab:
    equateLoc(curFile,locA,atCursor)
    moveCursor(curFile,sTab)
    while (is(curFile,space) | is(curFile,9)) {
        clearChar(curFile)
        if (eqLoc(curFile,atCursor,locA)) return
    }>

Switch to/from using spaces for tabs or using real tabs
<altCtl-tab: flipFlag(curFile,trueTabs)>

Show tab ruler above cursor line
<shftAlt-tab: seeRuler>

Set tab ruler using mouse or keys
<shftCtl-tab:
    putMsg(
    "Use mouse click/drag, Tab, Space, BS, Del (anykey=quit,Amiga-ESC=abort)")
    setRuler putMsg(" ") >

Convert tabs in document to spaces
<lAmiga-t: tabsToSpaces >

Convert spaces in document to TABs
<rAmiga-t: spacesToTabs >

Set TAB table number (0-4) to use for TAB spacing
<shftAltCtl-tab:
    putMsg("Enter new tab table # (0-4):")
    if (inputNum(n54) & geNum(n54,0) & geNum(4,n54)) {
        setLocal(curFile,tabTable,n54)
        equateNum(tabTable,n54)
    } >

Toggle "busies" setting - when turned on, it shows buffers being worked on
<ctl-b: flipFlag(curFile,busies) >

Trim spaces between the next two words after cursor
<alt-c:
    while (copyChar(curfile,n54)
        & !(eqNum(n54,32) | eqNum(n54,9) | is(curfile,efile)))
                moveCursor(curFile,eChar)
    moveCursor(curFile,eChar)
    if (is(curfile,efile)) returnFalse
    while (copyChar(curfile,n54)
        & (eqNum(n54,32) | eqNum(n54,9)))
                clearChar(curfile) >

Let next character typed be a CTRL-character, such as formfeed, etc
<ctl-c:
    putMsg("Input a control character:")
    getChar(n54)
    if (geNum(31,n54) | (geNum(n54,64) & geNum(127,n54))) {
        and(n54,n54,31)
        insertChar(curFile,n54)
    }
    putMsg(" ") >

Count number of times the next command is successfully executed
<shftAlt-c:
    equateNum(n90,0)
    putMsg("Input command to execute & count:")
    if (getKey(n91)) {
        while (runKey(n91)) incNum(n90)
        freeBuf(buf54)
        insertRgn(buf54,sFile,"Times executed = ",all)
        toWord(buf54,n90)
        putMsg(buf54)
    } >

Delay the amount of time (tenths of seconds) stored using shftAlt-d
<alt-d: delay(n46) >

Delete cursor line, storing it in Undo buffer.  (See keypad-0/7/9.)
<ctl-d: runKey(virtual-x)
>

Delete cursor line
<virtual-x:
    if (!eqLoc(curFile,locB,atCursor)) freeBuf(buf45)
    equateLoc(curFile,locB,atCursor)
    if (!is(curFile,sLine)) moveCursor(curFile,sLine)
    if (!eqLoc(curFile,locB,atCursor)) {
        equateLoc(curFile,locA,atCursor)
        insertRgn(buf45,sFile,curFile,loc)
        clearRgn(curFile,loc)
    } else equateLoc(curFile,locA,atCursor)
    if (!is(curFile,eLine)) moveCursor(curFile,eLine)
    moveCursor(curFile,eChar)
    equateLoc(curFile,locB,atCursor)
    insertRgn(buf45,eFile,curFile,loc)
    equateLoc(buf45,sPage,sFile)
    clearRgn(curFile,loc) >

Set the delay variable to some value in tenths of seconds
<shftAlt-d:
    putMsg("Input # tenths of seconds (used in delays)")
    inputNum(n46) >

Change end-of-line character
<alt-e:
    putMsg("Input new end-of-line value (usually 10 or 13):")
    inputNum(n54)
    setEol(n54)
    refreshDisplay >

Change current document's end-of-line character
<ctl-e:
    putMsg("Input file's current end-of-line value (usually 10 or 13):")
    inputNum(n54)
    if (!gtNum(n54,0)) returnFalse
    putMsg("Input new end-of-line value (usually 10 or 13):")
    inputNum(n53)
    if (!gtNum(n53,0)) returnFalse
    setEol(n54)
    moveCursor(curFile,sFile)
    putMsg("Changing eol characters... Amiga-ESC=abort.")
    if (is(curFile,n54)) swapChar(curFile,n53)
    while (moveCursor(curFile,eLine))
        if (is(curFile,n54)) swapChar(curFile,n53)
    setEol(n53)
    vScroll(sFile)
    putMsg(" ")
    refreshDisplay >

Input the number of buffer to free
<alt-f:
    putMsg("Input buffer # to free:")
    if (inputNum(n54)) freeBuf(buf[n54]) >

Flip upper/lower case of char under cursor
<ctl-f:
    if (is(curFile,alpha)) {
        if (is(curFile,lowerCase)) toUpper(curFile)
        else toLower(curFile)
    }
    moveCursor(curFile,eChar) >

Toggle the mark-gadgets setting.  When "off", the gadget names don't show
<ctl-g: flipFlag(curFile,markGadgets) >

Input a new lines/page value
<alt-g:
    putMsg("Enter new lines/page setting:")
    inputNum(n54)
    if (gtNum(n54,0)) {
        setLocal(curFile,pageLines,n54)
        equateNum(pageLines,n54)
    } >

Uncolor the hilite region
<alt-h: equateLoc(curFile,sHilite,eHilite) refreshDisplay >

Erase hilite region.  No Copy is made!
<ctl-h: clearRgn(curFile,hilite) >

Uncolor the invert region
<alt-i: equateLoc(curFile,sInvert,eInvert) refreshDisplay >

Erase the invert region.  No Copy is made!
<ctl-i: clearRgn(curFile,invert) >

Scan index buffer, build an index.  (See shftAlt-buttonDown/buttonUp.)
<shftAlt-i:
    if (isEmpty(buf41)) returnFalse
    runKey(alt-g)           .. Could elim.  get lines-per-page setting to use
    freeBuf(buf54)
    putMsg("Working....")                   .. erase duplicate items in buf41
label(10)                                              .. get next index item
    moveCursor(buf41,sFile)
    while (is(buf41,whiteSpace)) clearChar(buf41)    .. clear any blank lines
    if (is(buf41,eFile)) goto label(11)            .. done finding duplicates
    equateLoc(buf41,sInvert,atCursor)                           .. mark start
    moveCursor(buf41,downLine)
    equateLoc(buf41,eInvert,atCursor)                             .. mark end
    freeBuf(buf49)
    insertRgn(buf49,eFile,buf41,invert)                 .. copy item to buf49
    clearRgn(buf41,invert)                                .. erase from buf41
    insertRgn(buf54,eFile,buf49,all)                       .. add it to buf54
    moveCursor(buf41,eFile)                           .. search bkwd for dups
    setSearch(buf49)
    while (search(buf41,sInvert,eInvert,-1)) clearRgn(buf41,invert).. del dup
    goto label(10)                  .. get next item, unless buf41 empty now.
label(11)
    freeBuf(buf41)                                           .. starting over
    insertRgn(buf41,eFile,buf54,all)            .. store no-dup list in buf41
    freeBuf(buf54)                                 .. erase old list in buf54
label(1)                            .. NOTE: should have used swapBuf instead
    moveCursor(buf41,sFile)
    while (is(buf41,whiteSpace)) clearChar(buf41)   .. clear lead white space
    if (is(buf41,eFile)) {                   .. buf41 empty, must be finished
        swapBuf(buf54,buf41)                            .. index was in buf54
        freeBuf(buf54)
        setFileName(buf41,"Index")
        equateLoc(buf41,sPage,sFile)
        equateLoc(buf41,atCursor,sFile)
        putMsg("Press ctl-w to see Index")                        .. finished
        return
    }
    freeBuf(buf49)
    insertRgn(buf49,sFile,buf41,line)        .. load search string with item.
    clearRgn(buf41,line)                                    .. erase the item
    putMsg(buf49)                                            .. show the item
    moveCursor(buf54,eFile)              .. put item at end of index building
    insertRgn(buf54,eFile,buf49,all)
    insertRgn(buf54,eFile,"  ",all)        .. space before page #s that go in
    insertChar(buf54,eLine)
    moveCursor(buf54,sChar)
    equateNum(n53,0)                                 .. so know if need comma
    moveCursor(curFile,sFile)
    label(2)
    setSearch(buf49)
    while (search(curFile,sInvert,eInvert,1)) {
        moveCursor(curFile,sChar)
        if (is(curFile,alpha)) {
            label(3)                       .. part of a bigger word so ignore
            moveCursor(curFile,eInvert)
            goto label(2)                                .. and resume search
        }
        if (is(curFile,digit)) goto label(3)   .. part of bigger word, ignore
        moveCursor(curFile,eInvert)
        if (is(curFile,alpha)
             | is(curFile,digit)) goto label(2).. part of bigger word, ignore
        getPageRowCol(n54,n50,n49)                       .. this uses display
        moveCursor(curFile,eForm)          .. don't search again on this page
        if (!eqNum(n53,0)) insertChar(buf54,",")    .. put comma if not 1st #
        toWord(buf54,n54)              .. install the page # after index item
        equateNum(n53,n54)         .. so will put in comma next time for sure
    }
    goto label(1)                                 .. get next item from buf41
>

Toggle the "make icons" flag.  When "on", Workbench icons are created
<altCtl-i: flipFlag(curFile,icons)>

Enter idle-timer value (tenths of sec) after which idle command executed
<shftAltCtl-i:
    putMsg("Input idle time (tenths of a second)")
    if (inputNum(n54)) equateNum(idleTime,n54)>

Toggle the right-justify typing mode
<alt-j: flipFlag(curFile,rightJustify) >

Join next line to cursor line
<ctl-j:
    if (!is(curFile,eLine)) moveCursor(curFile,eLine)
    equateLoc(curFile,locA,atCursor)
    while (moveCursor(curFile,eChar)
        & (is(curFile,space) | is(curFile,9))) nothing
    equateLoc(curFile,locB,atCursor)
    clearRgn(curFile,loc)
    insertChar(curFile," ") >

Move the hilite to the left by one character (space or tab)
<alt-l:
    moveCursor(curFile,sHilite)
    if (!is(curFile,sLine)) moveCursor(curFile,sLine)
label(1)
    if (is(curFile,space) | is(curFile,9)) clearChar(curFile)
    if (!is(curFile,eLine)) moveCursor(curFile,eLine)
    moveCursor(curFile,eChar)                           .. start of next line
    if (gtLoc(curFile,eHilite,atCursor)) goto label(1) >

Convert the character under the cursor to lower case and move cursor fwd
<ctl-l:
    toLower(curFile)
    moveCursor(curFile,eChar) >

Set bottom margin
<lAmiga-l:
    putMsg("Input bottom margin lines (0-200):")
    if (inputNum(n54)) equateNum(bottomMargin,n54)
    setLocal(curFile,bottomMargin,bottomMargin)>

Set command multiplier to use for next command
<ctl-m: putMsg("Input command multiplier:") inputNum(cmdMultiplier) >

Swap the mouse's button-Up operation with the next key-command pressed
<alt-m:
    putMsg("Will swap mouse buttonUp with your next input:")
    if (getKey(n53) & swapKey(n53,normal-buttonUp)) {
        putMsg("Swapped - to undo, do it again")
        return
    }
    putMsg(" ") >

Map illegal ASCII (0 thru 5) characters into safe ones.  (See top of Config!)
<shftAlt-m: flipFlag(curFile,mapChars)>

Rename the document in the window
<alt-n:
    putMsg("Input new filename:")
    getFileName(buf43,curFile)
    if (inputString(buf43))
    setFileName(curFile,buf43) >

Input a text line number to go to
<ctl-n:
    putMsg("Input line number:")
    if (inputNum(n54)) {
        lineToLoc(curFile,atCursor,n54)
        vScroll(atCursor)
    } >

Open the cursor line for typing
<ctl-o:
    insertChar(curFile,eLine)
    moveCursor(curFile,sChar) >

Move the hilite region to the right by one space
<alt-r:
    moveCursor(curFile,sHilite)
    if (!is(curFile,sLine)) moveCursor(curFile,sLine)
    while (gtLoc(curFile,eHilite,atCursor)) {
        insertChar(curFile,32)
        if (!is(curFile,eLine)) moveCursor(curFile,eLine)
        moveCursor(curFile,eChar)
    } >

Terminate Learn Mode or run whatever is stored in learn-buffer.  (See ctl-s.)
<ctl-r: runLearn  >

Speak the hilite region, a line at a time
<alt-s:
    if (gtLoc(curFile,eHilite,sHilite)) {
        freeBuf(buf50)
        insertRgn(buf50,eFile,curFile,hilite)
        speak(buf50)
    } >

Start/abort Learn Mode.  (Use ctl-r to finish & to run it.)
<ctl-s:
    if (!getFlag(curFile,learnMode)) putMsg("LEARN MODE ACTIVE!")
    else putMsg("Learn Mode cancelled.")
    flipFlag(curFile,learnMode) >

Line sort:  sorts stacked list of words/phrases (removes duplicates).
<shftAlt-s:
    movecursor(curfile,sfile)
    refreshdisplay
    runKey(lAmiga-t)                                .. convert tabs to spaces
    putMsg("Del trail white...")
    runKey(ctl-4)                               .. clear trailing white space
    moveCursor(curfile,sfile)
    putMsg("Del blank lines...")
label(0)
    if (is(curfile,eline)) clearChar(curfile)
    else moveCursor(curfile,downLine)
    if (not is(curfile,efile)) goto label(0)
    movecursor(curfile,sfile)
    refreshdisplay

    putMsg("Sorting")
    .. count lines
    movecursor(curfile,sfile)
    equateNum(n54,0)
    while (moveCursor(curfile,downline)) incNum(n54)
    if (gtNum(2,n54)) returnFalse                          .. too few to sort
    equateNum(n53,n54)      .. store MAX
    
    while (nothing) {    .. while (gap >>= 1)
        div(n54,n54,2)
        if (eqNum(n54,0)) {
            moveCursor(curfile,sfile)
            refreshdisplay
            putMsg("Done")
            return
        }
label(20)
        equateNum(n50,0)    .. swapped = FALSE
        putMsg(n54) .. show gap size
        fileSize(curfile,n0)
        
        moveCursor(curfile,sfile)   .. cursor at start of file
        refreshdisplay
        swapLoc(curfile,atcursor,loca)
        moveCursor(curfile,sfile)
        equateNum(n51,n54)  .. put locA 1 gap distance from sof
        while (decNum(n51)) moveCursor(curfile,downline)
        swapLoc(curfile,atCursor,loca)  .. now ready
        
        while (nothing) {
            clearRgn(buf48,all)
            clearRgn(buf49,all)
            insertRgn(buf48,efile,curfile,line) .. copy cursor line
            swapLoc(curfile,atcursor,loca)
            insertRgn(buf49,efile,curfile,line) .. copy locA line
            swapLoc(curfile,atcursor,loca)
            if (isEmpty(buf49) | isEmpty(buf48)) goto label(21)
            if (stringComp(n49,buf49,buf48,1)) { .. delete duplicate
                if (stringComp(n49,buf49,buf48,0)) { .. true dup?
                    clearRgn(curfile,line)
                    clearChar(curfile)
                    equateNum(n50,1) .. swapped = TRUE, force a rerun
                    moveCursor(curfile,sline)
                    putMsg(buf48)
                }
            } else if (gtNum(0,n49)) {  .. not alpha order, swap them
                clearRgn(curfile,line)
                insertRgn(curfile,atcursor,buf49,all)
                moveCursor(curfile,sLine)   .. start of this line
                swapLoc(curfile,atcursor,loca)
                clearRgn(curfile,line)
                insertRgn(curfile,atcursor,buf48,all)
                moveCursor(curfile,sLine)   .. start of this line
                swapLoc(curfile,atcursor,loca)
                equateNum(n50,1) .. swapped = TRUE
                putMsg(buf48)
            }
            moveCursor(curfile,eLine)
            moveCursor(curfile,eChar)
            swapLoc(curfile,atcursor,loca)
            moveCursor(curfile,eLine)
            moveCursor(curfile,eChar)
            swapLoc(curfile,atcursor,loca)
        }
label(21)
        if (eqNum(n50,1)) goto label(20) .. got swaps, go again
    }
    
>

Show key-help message on next key pressed.  Copy key-help to RAM: on first
<ctl-t:
    putMsg("Input a key, gadget, click etc to get Help msg")
    getKey(n54)
    teachOne(n54)>

Toggle between using printable keys for commands or for normal typing input
<alt-u: flipFlag(curFile,useKeys)>

Load UStar config
<virtual-u:
    if (!loadConfig("UstarData!")) loadConfig("S:UstarData!") >

Convert char under cursor to upper case
<ctl-u:
    toUpper(curFile)
    moveCursor(curFile,eChar) >

Set left margin
<lAmiga-m:
    putMsg("Input left margin column (0-200):")
    if (inputNum(n54)) equateNum(leftMargin,n54)
    setLocal(curFile,leftMargin,leftMargin)>

Set top margin
<lAmiga-u:
    putMsg("Input top margin lines (0-200):")
    if (inputNum(n54)) equateNum(topMargin,n54)
    setLocal(curFile,topMargin,topMargin)>

Switch flag that makes CTRL chars vis/invis
<ctl-v: flipFlag(curFile,spooks) refreshDisplay >

Swap the current document in window with buffer 41
<ctl-w: swapBuf(curFile,buf41) >

Swap current buffer to buffer 0 (the "home" buffer of Uedit)
<alt-w:
    swapBuf(buf0,curFile)
    editBuf(buf0) >

For programmers:  Toggle number under cursor between hex/decimal
<ctl-x: hexDecimal(curFile) >

Execute an AmigaDOS command, but don't collect the results
<ctl-y:
    putMsg("Enter AmigaDOS command")
    freeBuf(buf40)
    if (inputString(buf40)) execute(" ",buf40) >

Execute an AmigaDOS command and show the results
<ctl-z:
    putMsg("Enter AmigaDOS command")
    freeBuf(buf40)
    freeBuf(buf39)
    if (!inputString(buf40) | !execute(buf39,buf40)) returnFalse
    if (!isEmpty(buf39)) {
        putMsg("Result of AmigaDOS command:")
        flipFlag(buf39,changed)
        editBuf(buf39)
        vscroll(sFile)
        updateDisplay
        return
    }
    putMsg("No reply from AmigaDOS.")
    freeBuf(buf39) >

Search for buf53 dirname in buf38.  Add name to list if not there.
<virtual-7:
    moveCursor(buf53,eFile)
    decLoc(buf53,atCursor)
    if (!is(buf53,"/") & !is(buf53,":")) insertRgn(buf53,eFile,"/",all)
    if (isEmpty(buf38)) runKey(virtual-8)                .. default dir names
                                         .. if (isEmpty(buf38)) goto label(0)
    moveCursor(buf38,sFile)
    equateLoc(buf38,eHilite,sHilite)
label(1)
    while (is(buf38,whiteSpace)) moveCursor(buf38,eChar)
    if (is(buf38,eFile)) goto label(0)                              .. add it
    equateLoc(buf38,sHilite,atCursor)                          .. store start
    while (!is(buf38,whiteSpace) & !is(buf38,eFile))
        moveCursor(buf38,eChar)
    equateLoc(buf38,eHilite,atCursor)                            .. store end
    freeBuf(buf52)
    insertRgn(buf52,sFile,buf38,hilite)
    if (!stringComp(n54,buf53,buf52,1)) goto label(1)            .. try again
    moveCursor(buf38,sHilite)          .. found dirname.  Put cursor at start
    goto label(5)
label(0)                                        .. dirname not found.  Add it
    moveCursor(buf38,eFile)
    if (!isEmpty(buf53)) {
        locToCol(buf38,n54,atCursor)
        if (gtNum(n54,60)) insertChar(buf38,eLine)
        else insertChar(buf38,9)                                       .. tab
    }
    equateLoc(buf38,sHilite,eFile)
    decLoc(buf38,sHilite)
    insertRgn(buf38,eFile,buf53,all)         .. install new dirname as curdir
    equateLoc(buf38,eHilite,eFile)
    incLoc(buf38,sHilite)
    moveCursor(buf38,sHilite)
    equateNum(n54,curFile)
label(5)
    freeBuf(buf53)
    if (!eqNum(n54,38) & gotoSplit(buf38)) gotoSplit(buf[n54])..force refresh
    runKey(virtual-9)
>

Load beginning directory names into buf38
<virtual-8:
    if (isEmpty(buf38)) {
        if (!insertFile(buf38,eFile,"S:Directories"))
           insertRgn(buf38,eFile," DF0:	DF1:	DH0:	S:	RAM:	VD0:",all)
        moveCursor(buf38,eFile)
        equateLoc(buf38,sHilite,eHilite)
        equateLoc(buf38,mouseLoc,eFile)
     }
     equateLoc(buf38,sPage,sFile) >

Put up msg telling what click-loading directory now is.
<virtual-9:
    freeBuf(buf53)
    insertRgn(buf53,eFile,"Click-loading directory = ",all)
    if (gtLoc(buf38,eHilite,sHilite)) insertRgn(buf53,eFile,buf38,hilite)
    else insertRgn(buf53,eFile,"default",all)
    putMsg(buf53)
    freebuf(buf53) >

Get listing. (Also sets directoryname used in ctl-buttonDown.)
<alt-z:
    putMsg("Enter directory: ")
    freeBuf(buf53)
    if (inputString(buf53)) runKey(virtual-7)
    freeBuf(buf54)
    insertRgn(buf54,eFile,"Dir ",all)
    insertRgn(buf54,eFile,buf38,hilite)
    if (!execute(buf39,buf54)) returnFalse
    moveCursor(buf39,sFile)
    insertChar(buf39,eLine)
    insertRgn(buf39,sFile,buf38,hilite)
    newFile
    swapBuf(buf39,curFile)
    freeBuf(buf39)
    vScroll(sFile)
    putMsg("To load files, ctrl-click names with mouse.")
    setFileName(curFile,buf54)
    flipFlag(curFile,changed) >

Change the current working directory
<altCtl-z:
    putMsg("Change current directory to (may not work in Workbench):")
    freeBuf(buf53)
    if (inputString(buf53)) changeDir(buf53) >

Clear leading white space in cursor line
<alt-1:
    equateLoc(curFile,locA,atCursor)
    if (!is(curFile,sLine)) moveCursor(curFile,sLine)
    while (is(curFile,whiteSpace) & !is(curFile,eLine) & !is(curFile,12))
                clearChar(curFile)
    equateLoc(curFile,atCursor,locA) >

Center text in the line.  (Uses current line length.)
<alt-2:
    runKey(alt-1)                                .. clear leading white space
    if (is(curFile,blankLine)) returnFalse
    if (!is(curFile,eLine)) moveCursor(curFile,eLine)
    locToCol(curFile,n53,atCursor)
    equateNum(n54,lineLength)
    incNum(n54)
    if (gtNum(n54,n53)) {
        moveCursor(curFile,sLine)
        sub(n53,n54,n53)
        div(n53,n53,2)
        do (n54,2,n53) insertChar(curFile," ")
    } >

Match indent of cursor line to previous line
<alt-4:
    equateNum(n54,0)
    moveCursor(curFile,upLine)
    if (!getFlag(curFile,autoIndent)) {
        flipFlag(curFile,autoIndent)
        equateNum(n54,1)
    }
    if (!is(curFile,eLine)) moveCursor(curFile,eLine)
    clearChar(curFile)
    typeChar(eLine)
    if (eqNum(n54,1)) flipFlag(curFile,autoIndent)
    moveCursor(curFile,downLine) >

Right-align the cursor line from cursor rightward
<alt-5:
    if (!is(curFile,whiteSpace)) moveCursor(curFile,sChar)
    if (is(curFile,eLine)) return
    while (is(curFile,whiteSpace) & !is(curFile,sLine)) {
        clearChar(curFile)
        moveCursor(curFile,sChar)
    }
    moveCursor(curFile,eChar)
    equateLoc(curFile,locA,atCursor)
    if (!is(curFile,eLine)) moveCursor(curFile,eLine)
    locToCol(curFile,n54,atCursor)
    decNum(n54)
    getLocal(curFile,n53,lineLength)
    sub(n54,n53,n54)
    moveCursor(curFile,locA)
    if (gtNum(n54,0)) while (decNum(n54)) insertChar(curFile," ") >

Show the value of a number variable
<alt-8:
    putMsg("n-variable #: ")
    inputNum(n54)
    freeBuf(buf54)
    insertChar(buf54,"n")
    toWord(buf54,n54)
    insertRgn(buf54,eFile," is ",all)
    toWord(buf54,n[n54])
    putMsg(buf54) >

Set the value of a number variable
<alt-9:
    putMsg("Set n-variable #:")
    inputNum(n54)
    putMsg("To value:")
    inputNum(n[n54])>

Show the ASCII value of the character under the cursor
<ctl-/:
    copyChar(curFile,n54)
    freeBuf(buf54)
    toWord(buf54,n54)
    insertRgn(buf54,sFile,"Character value under cursor was ",all)
    putMsg(buf54)
    moveCursor(curFile,eChar) >

Show the current document size
<ctl-1:
    fileSize(curFile,n54)
    freeBuf(buf54)
    insertRgn(buf54,sFile,"File size in bytes: ",all)
    toWord(buf54,n54)
    putMsg(buf54)>

Switch displaying of cursor row-column off/on
<ctl-2: flipFlag(curFile,rowCol) >

This is a simple reformat cmd that doesn't refmt indented paragraphs.
.. <ctl-3: if (reformat) moveCursor(curFile,downLine) >

Reformat cursor paragraph, starting at cursor line
<ctl-3:                   .. move down, if blank line, to find par beginning.
    while (is(curFile,blankLine)) {
        moveCursor(curFile,downLine)
        if (!is(curFile,eLine)) moveCursor(curFile,eLine)
        if (is(curFile,eFile)) returnFalse
    }
    equateNum(n3,0)                                      .. a flag used below
    equateLoc(curFile,locA,atCursor)                   .. store par beginning
label(2)                                        .. get indent of 1st par line
    if (!is(curFile,sLine)) moveCursor(curFile,sLine)
    while (is(curFile,whiteSpace)) moveCursor(curFile,eChar)
    locToCol(curFile,n0,atCursor)                .. get the 1st line's indent

    if (eqNum(n3,0)) {                                 .. if doing FIRST line
        equateNum(n1,n0)                      .. store indent of 1st par line
        equateNum(n3,1)                 .. set a flag so won't come back here
        equateLoc(curFile,locB,atCursor)           .. store 1st text location
        moveCursor(curFile,downLine)                      .. move to 2nd line
        if (is(curFile,blankLine)) {                        .. no second line
            equateNum(n0,1)
            goto label(3)
        }
        goto label(2)               .. go back and get indent of 2nd par line
    }
label(3)
    moveCursor(curFile,upLine)                       .. move back to 1st line
    equateNum(n2,n0)                              .. store indent of 2nd line

    if (eqNum(n2,-1) | geNum(n2,n1)) {                  .. was no 2nd line or
        reformat                       .. 2nd line inset, so do only 1st line
        goto label(5)                                             .. finished
    } else {                             .. 2nd line has less or equal indent
        sub(n1,n1,n2)                    .. par indent = 1st indent minus 2nd
        colToLoc(curFile,atCursor,n2)
        equateLoc(curFile,locA,atCursor)
        clearRgn(curFile,loc)             .. wiping out extra 1st line indent
        do (n54,1,n1) insertChar(curFile,"x")                .. repl with x's
        moveCursor(curFile,sWord)                         .. made a FAKE WORD
        equateLoc(curFile,locA,atCursor)                     .. store its loc
        reformat                              .. now paragrah has SAME indent
        equateLoc(curFile,locB,atCursor)                  .. store end of par
        moveCursor(curFile,locA)                      .. go back to fake word
        while (is(curFile,"x")) {                      .. swap x's for spaces
            swapChar(curFile," ")
            moveCursor(curFile,eChar)
        }                                            .. now fake word is gone
        equateLoc(curFile,atCursor,locB)                   .. goto end of par
label(5)
        moveCursor(curFile,downLine)                       .. leave paragraph
    }
>

Delete all trailing white-space in current document
<ctl-4:
    equateLoc(curFile,locA,atCursor)
    moveCursor(curFile,sFile)
    while (nothing) {
        if (is(curFile,eFile))
            { equateLoc(curFile,atCursor,locA) return }
        moveCursor(curFile,eLine)
        moveCursor(curFile,sChar)
        while (is(curFile,space) | is(curFile,9))
            { clearChar(curFile) moveCursor(curFile,sChar) }
        moveCursor(curFile,eLine)
    } >

Save a learn-sequence to disk, saving it under a Name
<ctl-5:
    putMsg("Save learn seq under what Name?")
    freeBuf(buf54)
    if (inputString(buf54) & !saveLearn(buf54))
                putMsg("Couldn't save") >

Load a learn-sequence stored on disk
<ctl-6:
    putMsg("Load what learn seq Name?")
    freeBuf(buf54)
    if (inputString(buf54) & !loadLearn(buf54))
                putMsg("Not found") >

Load and run learn-sequence stored on disk
<ctl-7:
    putMsg("Load & run what learn seq Name?")
    freeBuf(buf54)
    if (inputString(buf54) & loadLearn(buf54)) runLearn
    else putMsg("Not found") >

Toggle case-sensitivity of search
<ctl-8: flipFlag(curFile,searchCaps) >

                        *** arithmetic commands ***

Set running arithmetic total to zero
<ctl-0: equateNum(n49,0) >

Type the running arithmetic total into text at cursor
<ctl-\:
    freeBuf(buf54)
    div(n52,n49,100)
    if (gtNum(0,n49)) if (eqNum(n52,0)) insertChar(buf54,"-")
    toWord(buf54,n52)
    insertChar(buf54,".")
    if (gtNum(0,n49)) mul(n52,n49,-1)
    else equateNum(n52,n49)
    mod(n52,n52,100)
    if (gtNum(10,n52)) insertChar(buf54,"0")
    toWord(buf54,n52)
    insertRgn(curFile,atCursor,buf54,all)
    insertRgn(buf54,sFile,"Inserted total into text ",all)
    putMsg(buf54) >

Add the next word (if a number) to arithmetic total & display total
<ctl-=:
    moveCursor(curFile,eWord)
    moveCursor(curFile,sWord)
    if (!is(curFile,digit)) returnFalse
    toNumber(n54,curFile)
    moveCursor(curFile,eWord)
    if (is(curFile,".")) {
        moveCursor(curFile,eChar)
        if (!is(curFile,digit)) goto label(1)
        toNumber(n53,curFile)
        moveCursor(curFile,eChar)
        if (!is(curFile,digit)) {
            mul(n53,n53,10)
            moveCursor(curFile,sChar)
        }
        moveCursor(curFile,eWord)
    } else { label(1) equateNum(n53,0) }
    mul(n54,n54,100)
    if (gtNum(0,n54)) mul(n52,n53,-1)
    else equateNum(n52,n53)
    add(n54,n54,n52)
    add(n49,n49,n54)
    freeBuf(buf54)
    div(n52,n49,100)
    if (gtNum(0,n49) & eqNum(n52,0)) insertChar(buf54,"-")
    toWord(buf54,n52)
    insertChar(buf54,".")
    mod(n52,n49,100)
    if (gtNum(0,n49)) mul(n52,-1,n52)
    if (gtNum(10,n52)) insertChar(buf54,"0")
    toWord(buf54,n52)
    insertRgn(buf54,sFile,"Running total is ",all)
    putMsg(buf54) >

Subtract the next word (if a number) from arithmetic total & display total
<ctl--:
    moveCursor(curFile,eWord)
    moveCursor(curFile,sWord)
    if (!is(curFile,digit)) returnFalse
    toNumber(n54,curFile)
    moveCursor(curFile,eWord)
    if (is(curFile,".")) {
        moveCursor(curFile,eChar)
        if (!is(curFile,digit)) goto label(1)
        toNumber(n53,curFile)
        moveCursor(curFile,eChar)
        if (!is(curFile,digit)) {
            mul(n53,n53,10)
            moveCursor(curFile,sChar)
        }
        moveCursor(curFile,eWord)
    } else {
label(1)
        equateNum(n53,0)
    }
    mul(n54,n54,100)
    if (gtNum(0,n54)) mul(n52,n53,-1)
    else equateNum(n52,n53)
    add(n54,n54,n52)
    sub(n49,n49,n54)
    freeBuf(buf54)
    div(n52,n49,100)
    if (gtNum(0,n49) & eqNum(n52,0)) insertChar(buf54,"-")
    if (gtNum(0,n49)) insertChar(buf54,"-")
    toWord(buf54,n52)
    insertChar(buf54,".")
    mod(n52,n49,100)
    if (gtNum(0,n52)) mul(n52,n52,-1)
    if (gtNum(10,n52)) insertChar(buf54,"0")
    toWord(buf54,n52)
    insertRgn(buf54,sFile,"Running total is ",all)
    putMsg(buf54) >

                           *** columnar data ***

Put up msg saying turn ON columnar if it is OFF.
<virtual-`:
    if (!getFlag(curFile,columnar)) {
        alertUser("Turn ON columnar display mode first.  (See Columnar menu.)")
        abort
    } >

Toggle between columnar display and regular hilite/invert display mode
<shftCtl-`:
    flipFlag(curFile,columnar)
    refreshDisplay >

Copy and then clear the hilited columnar data
<shftCtl-1:
    runKey(virtual-`)
    freeBuf(buf37)
    copyColData(buf37,sFile,curFile,hilite,1)
    clearColData(curFile,hilite,0)  >

Space-fill the hilited columnar data, overlaying the original text.  No copy
<shftCtl-2:
    runKey(virtual-`)
    clearColData(curFile,hilite,1) >

Copy the hilited columnar data into a buffer
<shftCtl-3:
    runKey(virtual-`)
    if (geLoc(curFile,sHilite,eHilite)) returnFalse
    freeBuf(buf37) copyColData(buf37,sFile,curFile,hilite,1)>

Insert copied columnar data at the cursor
<shftCtl-4:
    runKey(virtual-`)
    copyColData(curFile,atCursor,buf37,all,1)>

Overlay copied columnar data onto existing text at the cursor
<shftCtl-5:
    runKey(virtual-`)
    copyColData(curFile,atCursor,buf37,all,0)>

Insert the columnar hilite region at the cursor.  (No intermediate copy.)
<shftCtl-6:
    runKey(virtual-`)
    copyColData(curFile,atCursor,curFile,hilite,1)>

Overlay the columnar hilite region onto existing text at the cursor
<shftCtl-7:
    runKey(virtual-`)
    copyColData(curFile,atCursor,curFile,hilite,0)>

                          *** interlace mode ***

Switch to/from interlace display mode
<shft-esc: flipFlag(curFile,lace)>

Switch to regular screen, 1 bitplane
<rAmiga-f1: setLocal(curfile, lace, 1) >

Switch to regular screen, 2 bitplanes
<rAmiga-f2: setLocal(curfile, lace, 0) >

Switch to lace screen, 1 bitplane
<rAmiga-f3: setLocal(curfile, lace, 3) >

Switch to lace screen, 2 bitplanes
<rAmiga-f4: setLocal(curfile, lace, 2) >

Tune the RGB colors in interlace using mouse.  (See alt-Help also.)
<alt-esc: laceColor>

Toggle scroll type in range 0-2
<rAmiga-s:
    toggle(scrollType)
    putMsg(scrollType) >

Toggle hide-display off/on
<rAmiga-h:
    toggle(hideDisplay)
    putMsg(hideDisplay) >

Assign a name to one of the 4 gadgets (1-4)
<ctl-esc:
    putMsg("Enter gadget number (1-4):")
    if (!inputNum(n54) | gtNum(n54,4) | gtNum(1,n54)) returnFalse
    putMsg("Enter gadget name (one Space to clear):")
    freeBuf(buf54)
    inputString(buf54)
    if (!isEmpty(buf54)) {
        gadgetName(n54,buf54)
        putMsg(" ")
    } >

Uedit's About... message
<shftAltCtl-a:
    updateDisplay
    getFilename(buf54,curfile)
    text(" ",0,0,0,-2)                       .. -2 clear screen using color 0
    setFileName(curFile,"          About Uedit...")
    text("           ",3,32,2,0)
    text("   UEDIT   ",4,32,-1,0)
    text("           ",5,32,-1,0)
    text(" Copyright (C) 1986-89, Rick Stiles ",6,19,7,0)
    text(" P.O. Box  666 ",7,30,-1,0)
    text(" Washington, IN 47501 ",8,27,-1,0)
    text("Uedit is SHAREWARE.",11,10,2,0)
    text("Try it and see how you like it.",13,10,-1,0)
    text("See ",15,10,-1,0)
    text("Uedit-Policy",-1,-1,5,0)
    text(" for ordering information.",-1,-1,2,0)
    do(n54,8,67) text(" ",1,n54,1,1)
    do(n54,2,17) text(" ",n54,67,1,1)
    equateNum(n54,67)
    while (!eqNum(n54,8)) {
        text(" ",17,n54,1,1)
        decNum(n54)
    }
    equateNum(n54,17)
    while (!eqNum(n54,1)) {
        text(" ",n54,8,1,1)
        decNum(n54)
    }
    getKeyVal(n53,n53)
    setFileName(curFile,buf54)
    text(" ",0,0,0,-2)                        .. -2 clear screen in normalVid
    refreshDisplay >

                                   *****

Assign new Primitive Mode terminator Ctrl-key
<normal-esc:
    putMsg("Enter new Primitive Mode terminator CTRL-key (pmESC)")
    if (getChar(n54) & gtNum(32,n54)) equateNum(pmESC,n54)
    putMsg(" ") >

Save changed files during idle periods, if their idle-save flag is set
<idle:
    getMaxFiles(n52)
    decNum(n52)
    do (n54,0,n52) if (!inputWaiting & getflag(buf[n54],changed)
        & getflag(buf[n54],userLocalA)) saveFile(buf[n54]) >

                          *** end of Config!M ***

