Changes

32-cvs (in development)

• Breaking changes
  • Remove javascript-jscs checker [GH-1024]
  • Remove elixir-dogma checker [GH-1450]
  • rust-cargo now requires Rust 1.17 or newer [GH-1289]
  • rust now requires 1.18 or newer [GH-1501]
  • Rename flycheck-cargo-rustc-args to flycheck-cargo-check-args [GH-1289]
  • rust-cargo does not use the variable flycheck-rust-args anymore [GH-1289]
  • Improve detection of default directory for haskell-ghc to consider hpack project files [GH-1435]
  • Replace go tool vet with go vet [GH-1548]
  • Remove the deprecated go-megacheck checker, which is replaced by go-staticcheck. [GH-1583]
• New syntax checkers:
  • CUDA with cuda-nvcc [GH-1508]
  • CWL with schema-salad-tool [GH-1361]
  • JSON with json-jq [GH-1568]
  • Jsonnet with jsonnet [GH-1345]
  • MarkdownLint CLI with markdownlint [GH-1366]
  • Nix with nix-linter [GH-1530]
  • Opam with opam lint [GH-1532]
  • Rust with rust-clippy [GH-1385]
  • Staticcheck with go-staticheck [GH-1541]
  • Tcl with nagelfar [GH-1365]
  • Text prose with textlint [GH-1534]
  • VHDL with ghdl [GH-1160]
  • mypy with python-mypy [GH-1354]
  • terraform with terraform fmt [GH-1586]
  • terraform-tflint with tflint [GH-1586]
  • protobuf-prototool with prototool [GH-1591]
  • Bazel with bazel-buildifier [GH-1613]
  • Ruumba with eruby-ruumba [GH-1616]
• New features:
  • Add flycheck-cppcheck-suppressions-file to pass a suppressions file to cppcheck [GH-1329]
  • Add --force-exclusion flag to rubocop command [GH-1348]
  • Add flycheck-ghc-stack-project-file for the haskell-stack-ghc checker. [GH-1316]
  • Add flycheck-perl-module-list to use specified modules when syntax checking code with the perl checker. [GH-1207]
  • Add flycheck-sh-bash-args to pass arguments to sh-bash [GH-1439].
  • Add flychjeck-eslint-args to pass arguments to javascript-eslint [GH-1360]
  • Add flycheck-default-executable-find, the new default value for flycheck-executable-find, to allow using relative paths to checkers (set e.g. in file or dir-local variables). [GH-1485]
  • Add idle-buffer-switch option for use in flycheck-check-syntax-automatically. Variables flycheck-idle-buffer-switch-delay and flycheck-buffer-switch-check-intermediate-buffers control the functionality [GH-1297]
  • Add flycheck-ghdl-ieee-library to select which standard IEEE library to use for ghdl. [GH-1547]
  • javascript-eslint checker now supports typescript-mode by default.
  • Add flycheck-erlang-rebar3-profile to select which profile to use when compiling erlang with rebar3.
  • Add flycheck-relevant-error-other-file-show to avoid showing errors from other files. [GH-1579]
  • Add an error explainer for the nix-linter checker. [GH-1586]
• Improvements
  • When a checker returns errors for another file, they will be displayed instead of ignored. They can be navigated to from the error list. This change helps with compiled languages, where an error in another file may cause the current file to be considered invalid. [GH-1427]
  • Enhanced the flycheck-verify-setup to show more clearly which checkers will run in the buffer, and which are misconfigured. [GH-1478]
  • Use Emacs’ native XML parsing when libXML fails. This behavior can be changed by customizing flycheck-xml-parser [GH-1349]
  • Changed parsing of ESLint output from checkstyle XML to JSON [GH-1350]
  • Flycheck will execute rubocop from directory where Gemfile is located. If Gemfile does not exist, old behaviour of running command from directory where .rubocop.yml is found will be used [GH-1368]
  • rust-cargo now uses cargo check and cargo test [GH-1289]
  • python-pylint and python-flake8 are now invoked with python -c, to make it easier to change between Python 2 and Python 3 [GH-1113]
  • haskell-stack-ghc will not try to install GHC thereby freezing Emacs [GH-1443]

31 (Oct 07, 2017)

• Breaking changes
  • rust-cargo now requires Rust 1.15 or newer [GH-1201]
  • Remove javascript-gjslint checker
• New syntax checkers:
  • Protobuf with protoc [GH-1125]
  • systemd-analyze with systemd-analyze [GH-1135]
  • Nix with nix-instantiate [GH-1164]
  • Dockerfile with hadolint [GH-1194]
  • AsciiDoc with asciidoctor [GH-1167]
  • CSS/SCSS/LESS with stylelint [GH-903]
  • Ruby with reek [GH-1244]
  • Go with megacheck [GH-1290]
  • LLVM IR with llc [GH-1302]
  • Text prose with proselint [GH-1304]
• New features:
  • Add flycheck-xml-xmlstarlet-xsd-path and flycheck-xml-xmllint-xsd-path to specify an XSD schema to validate XML documents against [GH-1272]
  • Add flycheck-tslint-args to pass additional arguments to tslint [GH-1186]
  • Add an error explainer to the rpm-rpmlint checker using rpmlint -I [GH-1235]
  • Add flycheck-emacs-lisp-check-declare to check function declaration in the emacs-lisp checker [GH-1286]
  • Add flycheck-shellcheck-follow-sources to check included files when using the sh-shellcheck checker [GH-1256]
• Improvements:
  • Use option flycheck-go-build-tags for go-test, go-vet and go-errcheck as well.
  • Add a revert function to flycheck-verify-setup, so hitting g reloads the buffer.
  • Make sure the erlang compiler is only run on compilable files.
  • flycheck-tslint does not crash any more on deprecation notices [GH-1174]
  • rust-cargo now checks integration tests, examples and benchmarks [GH-1206]
  • rust-cargo does not use flycheck-rust-library-path anymore, as dependencies are taken care of by Cargo [GH-1206]
  • c/c++-gcc checker now works from GCC 4.4 and up [GH-1226]

30 (Oct 12, 2016)

• Breaking changes
  • Flycheck now requires flake8 3.0 or newer
  • Remove --config option in lua-luacheck in favour of luacheck’s own .luacheckrc detection. Therefore flycheck-luacheckrc is no longer used [GH-1057]
  • :modes is now mandatory for syntax checker definitions [GH-1071]
  • Remove jade checker [GH-951] [GH-1084]
  • Remove javascript-eslintrc and instead rely on eslint’s own configuration file search [GH-1085]
  • C-c ! e explains errors now [GH-1122]
• New syntax checkers:
  • Elixir with dogma [GH-969]
  • sass and scss with sass-lint [GH-1070]
  • Pug [GH-951] [GH-1084]
• New features:
  • Add flycheck-cargo-rustc-args to pass multiple arguments to cargo rustc subcommand [GH-1079]
  • Add :error-explainer to flycheck-define-checker and flycheck-explain-error-at-point to display explanations of errors [GH-1122]
  • Add an error explainer to the rust and rust-cargo checkers using rustc --explain [GH-1122]
  • Add :enabled property to flycheck-define-checker [GH-1089]
• Improvements:
  • Do not use javascript-eslint if eslint cannot find a valid configuration [GH-1085]
  • Automatically disable syntax checkers which are not installed instead of checking executable before each syntax check [GH-1116]
  • Add patterns for syntax errors to scheme-chicken [GH-1123]

29 (Aug 28, 2016)

• Breaking changes
  • Change flycheck-eslint-rulesdir (string) to flycheck-eslint-rules-directories (list of strings) [GH-1016]
  • Require rust 1.7 or newer for rust and rust-cargo [GH-1036]
• New syntax checkers:
  • Slim with slim-lint [GH-1013]
  • CHICKEN Scheme with csc [GH-987]
• New features:
  • Add :working-directory option to flycheck-define-command-checker [GH-973] [GH-1012]
  • flycheck-go-build-install-deps turns on dependency installation for go test as well as go build [GH-1003]
• Improvements:
  • Add default directory for haskell-stack-ghc and haskell-ghc checkers [GH-1007]
  • rust and rust-cargo checkers now support the new error format of rust 1.12 [GH-1016]
  • flycheck-verify-checker and flycheck-verify-setup now include information about configuration files of syntax checkers [GH-1021] [GH-1038]

28 (Jun 05, 2016)

• Breaking changes:
  • Rename luacheck to lua-luacheck to comply with our naming conventions
  • Remove flycheck-cppcheck-language-standard in favour of flycheck-cppcheck-standards which is a list of standards [GH-960]
• New features:
  • Add option to set binary name for rust-cargo [GH-958]
  • Add flycheck-cppcheck-standards to pass multiple code standards to cppcheck [GH-960]
  • Add flycheck-cppcheck-suppressions to suppress warnings for cppcheck [GH-960]
• Improvements:
  • Check Racket syntax in Geiser Mode [GH-979]
• Bug fixes
  • Do not signal errors when tslint reports no output [GH-981]
  • Do not generate invalid temporary filenames on Windows [GH-983]

27 (May 08, 2016)

• Breaking changes
  • Require PHP Code Sniffer 2.6 or newer for php-phpcs [GH-921]
• New syntax checkers:
  • Go with go-unconvert [GH-905]
  • Markdown with mdl [GH-839] [GH-916]
  • TypeScript with tslint [GH-947] [GH-949]
• Improvements:
  • Pass checkdoc settings from Emacs to emacs-lisp-checkdoc [GH-741] [GH-937]
• Bug fixes:
  • Fix parsing of syntax errors in triple-quoted strings for python-pycompile [GH-948]
  • Correctly handle rules based on the current file name in php-phpcs [GH-921]

26 (Apr 27, 2016)

Flycheck now has a Code of Conduct which defines the acceptable behaviour and the moderation guidelines for the Flycheck community. [GH-819]

Flycheck also provides a Gitter channel now for questions and discussions about development. [GH-820]

The native Texinfo manual is again replaced with a Sphinx based documentation. We hope that this change makes the manual easier to edit and to maintain and more welcoming for new contributors. The downside is that we can not longer include a Info manual in Flycheck’s MELPA packages.

From this release onward Flycheck will use a single continuously increasing version number. Breaking changes may occur at any point.

• Breaking changes:
  • Remove flycheck-copy-messages-as-kill, obsolete since Flycheck 0.22
  • Remove flycheck-perlcritic-verbosity, obsolete since Flycheck 0.22
  • Replace flycheck-completion-system with flycheck-completing-read-function [GH-870]
  • JSON syntax checkers now require json-mode and do not check in Javascript Mode anymore
  • Prefer eslint over jshint for Javascript
  • Obsolete flycheck-info in favour of the new flycheck-manual command
• New syntax checkers:
  • Processing [GH-793] [GH-812]
  • Racket [GH-799] [GH-873]
• New features:
  • Add flycheck-puppet-lint-rc to customise the location of the puppetlint configuration file [GH-846]
  • Add flycheck-puppet-lint-disabled-checks to disable specific checks of puppetlint [GH-824]
  • New library flycheck-buttercup to support writing Buttercup specs for Flycheck
  • Add flycheck-perlcriticrc to set a configuration file for Perl::Critic [GH-851]
  • Add flycheck-jshint-extract-javascript to extract Javascript from HTML [GH-825]
  • Add flycheck-cppcheck-language-standard to set the language standard for cppcheck [GH-862]
  • Add flycheck-mode-line-prefix to customise the prefix of Flycheck’s mode line lighter [GH-879] [GH-880]
  • Add flycheck-go-vet-shadow to check for shadowed variables with go vet [GH-765] [GH-897]
  • Add flycheck-ghc-stack-use-nix to enable Nix support for Stack GHC [GH-913]
• Improvements:
  • Map error IDs from flake8-pep257 to Flycheck error levels
  • Explicitly display errors at point with C-c ! h [GH-834]
  • Merge message and checker columns in the error list to remove redundant ellipsis [GH-828]
  • Indicate disabled checkers in verification buffers [GH-749]
  • Do not enable Flycheck Mode in fundamental-mode buffers [GH-883]
  • Write go test output to a temporary files [GH-887]
  • Check whether lintr is actually installed [GH-911]
• Bug fixes:
  • Fix folding of C/C++ errors from included files [GH-783]
  • Fix verification of SCSS-Lint checkstyle reporter
  • Don’t fall back to rust if rust-cargo should be used [GH-817]
  • Don’t change current buffer when closing the error message buffer [GH-648]
  • Never display error message buffer in current window [GH-822]
  • Work around a caching issue in Rubocop [GH-844]
  • Fix checkdoc failure with some Emacs Lisp syntax [GH-833] [GH-845] [GH-898]
  • Correctly parse Haskell module name with exports right after the module name [GH-848]
  • Don’t hang when sending buffers to node.js processes on Windows [GH-794][GH-850]
  • Parse suggestions from hlint [GH-874]
  • Go errcheck handles multiple $GOPATH entries correctly now [GH-580][GH-906]
  • Properly handle Go build failing in a directory with multiple packages [GH-676] [GH-904]
  • Make cppcheck recognise C++ header files [GH-909]
  • Don’t run phpcs on empty buffers [GH-907]