#
# USB Input driver configuration
#
comment "USB Human Interface Devices (HID)"
	depends on USB

config USB_HID
	tristate "USB Human Interface Device (full HID) support"
	depends on USB
	---help---
	  Say Y here if you want full HID support to connect keyboards,
	  mice, joysticks, graphic tablets, or any other HID based devices
	  to your computer via USB. You also need to select HID Input layer
	  support (below) if you want to use keyboards, mice, joysticks and
	  the like.

	  You can't use this driver and the HIDBP (Boot Protocol) keyboard
	  and mouse drivers at the same time. More information is available:
	  <file:Documentation/input/input.txt>.

	  If unsure, say Y.

	  This code is also available as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want).
	  The module will be called hid.o. If you want to compile it as a
	  module, say M here and read <file:Documentation/modules.txt>.

comment "Input core support is needed for USB HID input layer or HIDBP support"
	depends on USB && INPUT=n

config USB_HIDINPUT
	bool "HID input layer support"
	depends on INPUT && USB_HID
	help
	  Say Y here if you want to use a USB keyboard, mouse or joystick,
	  or any other HID input device. You also need "Input core support", 
	  (CONFIG_INPUT), which you select under "Input device support", above.

	  If unsure, say Y.

config HID_FF
	bool "Force feedback support (EXPERIMENTAL)"
	depends on USB_HIDINPUT && EXPERIMENTAL
	help
	  Say Y here is you want force feedback support for a few HID devices. See
	  below for a list of supported devices.
	  See Documentation/input/ff.txt for a description of the force feedback API.

	  If unsure, say N.

config HID_PID
	bool "PID Devices"
	depends on HID_FF
	help
	  Say Y here if you have a PID-compliant joystick and wish to enable force
	  feedback for it. The Microsoft Sidewinder Force Feedback 2 is one such
	  device.

config LOGITECH_FF
	bool "Logitech WingMan *3D support"
	depends on HID_FF
	help
	  Say Y here if you have one of these devices:
	  - Logitech WingMan Cordless RumblePad
	  - Logitech WingMan Force 3D
	  and if you want to enable force feedback for them.
	  Note: if you say N here, this device will still be supported, but without
	  force feedback.

config USB_HIDDEV
	bool "/dev/hiddev raw HID device support"
	depends on USB_HID
	help
	  Say Y here if you want to support HID devices (from the USB
	  specification standpoint) that aren't strictly user interface
	  devices, like monitor controls and Uninterruptable Power Supplies.

	  This module supports these devices separately using a separate
	  event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
	  This driver requires CONFIG_USB_HID.

	  If unsure, say Y.


menu "USB HID Boot Protocol drivers"
	depends on USB!=n && USB_HID!=y

config USB_KBD
	tristate "USB HIDBP Keyboard (simple Boot) support"
	depends on USB && INPUT
	---help---
	  Say Y here only if you are absolutely sure that you don't want
	  to use the generic HID driver for your USB keyboard and prefer
	  to use the keyboard in its limited Boot Protocol mode instead.

	  This is almost certainly not what you want.  This is mostly
	  useful for embedded applications or simple keyboards.

	  This code is also available as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want).
	  The module will be called usbkbd.o. If you want to compile it as a
	  module, say M here and read <file:Documentation/modules.txt>.

	  If even remotely unsure, say N.

config USB_MOUSE
	tristate "USB HIDBP Mouse (simple Boot) support"
	depends on USB && INPUT
	---help---
	  Say Y here only if you are absolutely sure that you don't want
	  to use the generic HID driver for your USB keyboard and prefer
	  to use the keyboard in its limited Boot Protocol mode instead.

	  This is almost certainly not what you want.  This is mostly
	  useful for embedded applications or simple mice.

	  This code is also available as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want).
	  The module will be called usbmouse.o. If you want to compile it as
	  a module, say M here and read <file:Documentation/modules.txt>.

	  If even remotely unsure, say N.

endmenu

config USB_AIPTEK
	tristate "Aiptek 6000U/8000U tablet support"
	depends on USB && INPUT
	help
	  Say Y here if you want to use the USB version of the Aiptek 6000U
	  or Aiptek 8000U tablet.  Make sure to say Y to "Mouse support"
	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
	  (CONFIG_INPUT_EVDEV) as well.

	  This driver is also available as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want).
	  The module will be called aiptek.o. If you want to compile it as a
	  module, say M here and read <file:Documentation/modules.txt>.

config USB_WACOM
	tristate "Wacom Intuos/Graphire tablet support"
	depends on USB && INPUT
	help
	  Say Y here if you want to use the USB version of the Wacom Intuos
	  or Graphire tablet.  Make sure to say Y to "Mouse support"
	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
	  (CONFIG_INPUT_EVDEV) as well.

	  This driver is also available as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want).
	  The module will be called wacom.o.  If you want to compile it as a
	  module, say M here and read <file:Documentation/modules.txt>.

config USB_POWERMATE
	tristate "Griffin PowerMate and Contour Jog support"
	depends on USB && INPUT
	---help---
	  Say Y here if you want to use  Griffin PowerMate or Contour Jog devices.
	  These are stainless steel dials which can measure clockwise and
	  anticlockwise rotation. The dial also acts as a pushbutton. The base
	  contains an LED which can be instructed to pulse or to switch to a
	  particular intensity.

	  You can download userspace tools from http://sowerbutts.com/powermate/

	  This driver is also available as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want).
	  The module will be called powermate.o. If you want to compile it as a
	  module, say M here and read <file:Documentation/modules.txt>.

config USB_XPAD
	tristate "X-Box gamepad support"
	depends on USB && INPUT
	---help---
	  Say Y here if you want to use the X-Box pad with your computer.
	  Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV)
	  and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well.

	  For information about how to connect the X-Box pad to USB, see
	  Documentation/input/xpad.txt.

	  This driver is also available as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want).
	  The module will be called xpad.o.  If you want to compile it as a
	  module, say M here and read <file:Documentation/modules.txt>.

